From: Shannon Zhao <shannon.zhao@linaro.org>
To: xen-devel@lists.xen.org
Cc: julien.grall@arm.com, shannon.zhao@linaro.org,
stefano.stabellini@citrix.com, peter.huangpeng@huawei.com,
zhaoshenglong@huawei.com
Subject: [PATCH v7 14/22] arm/acpi: Create min DT stub for Dom0
Date: Fri, 25 Mar 2016 21:48:47 +0800 [thread overview]
Message-ID: <1458913735-2678-15-git-send-email-shannon.zhao@linaro.org> (raw)
In-Reply-To: <1458913735-2678-1-git-send-email-shannon.zhao@linaro.org>
Create a DT for Dom0 for ACPI-case only. DT contains minimal required
informations such as Dom0 bootargs, initrd, efi description table and
address of uefi memory table.
Also document this device tree bindings of "hypervisor" and
"hypervisor/uefi" node.
Signed-off-by: Naresh Bhat <naresh.bhat@linaro.org>
Signed-off-by: Parth Dixit <parth.dixit@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
v7: change the function name and address comments
---
docs/misc/arm/device-tree/guest.txt | 60 +++++++++++++++
xen/arch/arm/domain_build.c | 142 ++++++++++++++++++++++++++++++++++++
xen/arch/arm/efi/efi-dom0.c | 39 ++++++++++
xen/include/asm-arm/setup.h | 2 +
4 files changed, 243 insertions(+)
create mode 100644 docs/misc/arm/device-tree/guest.txt
diff --git a/docs/misc/arm/device-tree/guest.txt b/docs/misc/arm/device-tree/guest.txt
new file mode 100644
index 0000000..418f1e9
--- /dev/null
+++ b/docs/misc/arm/device-tree/guest.txt
@@ -0,0 +1,60 @@
+* Xen hypervisor device tree bindings
+
+Xen ARM virtual platforms shall have a top-level "hypervisor" node with
+the following properties:
+
+- compatible:
+ compatible = "xen,xen-<version>", "xen,xen";
+ where <version> is the version of the Xen ABI of the platform.
+
+- reg: specifies the base physical address and size of a region in
+ memory where the grant table should be mapped to, using an
+ HYPERVISOR_memory_op hypercall. The memory region is large enough to map
+ the whole grant table (it is larger or equal to gnttab_max_grant_frames()).
+ This property is unnecessary when booting Dom0 using ACPI.
+
+- interrupts: the interrupt used by Xen to inject event notifications.
+ A GIC node is also required.
+ This property is unnecessary when booting Dom0 using ACPI.
+
+To support UEFI on Xen ARM virtual platforms, Xen populates the FDT "uefi" node
+under /hypervisor with following parameters:
+
+________________________________________________________________________________
+Name | Size | Description
+================================================================================
+xen,uefi-system-table | 64-bit | Guest physical address of the UEFI System
+ | | Table.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-start | 64-bit | Guest physical address of the UEFI memory
+ | | map.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-size | 32-bit | Size in bytes of the UEFI memory map
+ | | pointed to in previous entry.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-desc-size | 32-bit | Size in bytes of each entry in the UEFI
+ | | memory map.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-desc-ver | 32-bit | Version of the mmap descriptor format.
+--------------------------------------------------------------------------------
+
+Example (assuming #address-cells = <2> and #size-cells = <2>):
+
+hypervisor {
+ compatible = "xen,xen-4.3", "xen,xen";
+ reg = <0 0xb0000000 0 0x20000>;
+ interrupts = <1 15 0xf08>;
+ uefi {
+ xen,uefi-system-table = <0xXXXXXXXX>;
+ xen,uefi-mmap-start = <0xXXXXXXXX>;
+ xen,uefi-mmap-size = <0xXXXXXXXX>;
+ xen,uefi-mmap-desc-size = <0xXXXXXXXX>;
+ xen,uefi-mmap-desc-ver = <0xXXXXXXXX>;
+ };
+};
+
+The format and meaning of the "xen,uefi-*" parameters are similar to those in
+Documentation/arm/uefi.txt in Linux, which are provided by the regular Linux
+UEFI stub. However they differ because they are provided by the Xen hypervisor,
+together with a set of UEFI runtime services implemented via hypercalls, see
+xen/include/public/platform.h.
diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 70c8421..58a44ff 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -1357,6 +1357,144 @@ static int prepare_dtb(struct domain *d, struct kernel_info *kinfo)
}
#ifdef CONFIG_ACPI
+#define ACPI_DOM0_FDT_MIN_SIZE 4096
+
+static int acpi_make_chosen_node(const struct kernel_info *kinfo)
+{
+ int res;
+ const char *bootargs = NULL;
+ const struct bootmodule *mod = kinfo->kernel_bootmodule;
+ void *fdt = kinfo->fdt;
+
+ DPRINT("Create chosen node\n");
+ res = fdt_begin_node(fdt, "chosen");
+ if ( res )
+ return res;
+
+ if ( mod && mod->cmdline[0] )
+ {
+ bootargs = &mod->cmdline[0];
+ res = fdt_property(fdt, "bootargs", bootargs, strlen(bootargs) + 1);
+ if ( res )
+ return res;
+ }
+
+ /*
+ * If the bootloader provides an initrd, we must create a placeholder
+ * for the initrd properties. The values will be replaced later.
+ */
+ if ( mod && mod->size )
+ {
+ u64 a = 0;
+ res = fdt_property(kinfo->fdt, "linux,initrd-start", &a, sizeof(a));
+ if ( res )
+ return res;
+
+ res = fdt_property(kinfo->fdt, "linux,initrd-end", &a, sizeof(a));
+ if ( res )
+ return res;
+ }
+
+ res = fdt_end_node(fdt);
+
+ return res;
+}
+
+static int acpi_make_hypervisor_node(const struct kernel_info *kinfo,
+ struct membank tbl_add[])
+{
+ const char compat[] =
+ "xen,xen-"__stringify(XEN_VERSION)"."__stringify(XEN_SUBVERSION)"\0"
+ "xen,xen";
+ int res;
+ /* Convenience alias */
+ void *fdt = kinfo->fdt;
+
+ DPRINT("Create hypervisor node\n");
+
+ /* See linux Documentation/devicetree/bindings/arm/xen.txt */
+ res = fdt_begin_node(fdt, "hypervisor");
+ if ( res )
+ return res;
+
+ /* Cannot use fdt_property_string due to embedded nulls */
+ res = fdt_property(fdt, "compatible", compat, sizeof(compat));
+ if ( res )
+ return res;
+
+ res = acpi_make_efi_nodes(fdt, tbl_add);
+ if ( res )
+ return res;
+
+ res = fdt_end_node(fdt);
+
+ return res;
+}
+
+/*
+ * Prepare a minimal DTB for Dom0 which contains bootargs, initrd, memory
+ * information, EFI table.
+ */
+static int create_acpi_dtb(struct kernel_info *kinfo, struct membank tbl_add[])
+{
+ int new_size;
+ int ret;
+
+ DPRINT("Prepare a min DTB for DOM0\n");
+
+ /* Allocate min size for DT */
+ new_size = ACPI_DOM0_FDT_MIN_SIZE;
+ kinfo->fdt = xmalloc_bytes(new_size);
+
+ if ( kinfo->fdt == NULL )
+ return -ENOMEM;
+
+ /* Create a new empty DT for DOM0 */
+ ret = fdt_create(kinfo->fdt, new_size);
+ if ( ret < 0 )
+ goto err;
+
+ ret = fdt_finish_reservemap(kinfo->fdt);
+ if ( ret < 0 )
+ goto err;
+
+ ret = fdt_begin_node(kinfo->fdt, "/");
+ if ( ret < 0 )
+ goto err;
+
+ ret = fdt_property_cell(kinfo->fdt, "#address-cells", 2);
+ if ( ret )
+ return ret;
+
+ ret = fdt_property_cell(kinfo->fdt, "#size-cells", 1);
+ if ( ret )
+ return ret;
+
+ /* Create a chosen node for DOM0 */
+ ret = acpi_make_chosen_node(kinfo);
+ if ( ret )
+ goto err;
+
+ ret = acpi_make_hypervisor_node(kinfo, tbl_add);
+ if ( ret )
+ goto err;
+
+ ret = fdt_end_node(kinfo->fdt);
+ if ( ret < 0 )
+ goto err;
+
+ ret = fdt_finish(kinfo->fdt);
+ if ( ret < 0 )
+ goto err;
+
+ return 0;
+
+ err:
+ printk("Device tree generation failed (%d).\n", ret);
+ xfree(kinfo->fdt);
+ return -EINVAL;
+}
+
static void acpi_map_other_tables(struct domain *d)
{
int i;
@@ -1742,6 +1880,10 @@ static int prepare_acpi(struct domain *d, struct kernel_info *kinfo)
clean_and_invalidate_dcache_va_range(d->arch.efi_acpi_table,
d->arch.efi_acpi_len);
+ rc = create_acpi_dtb(kinfo, tbl_add);
+ if ( rc != 0 )
+ return rc;
+
return 0;
}
#else
diff --git a/xen/arch/arm/efi/efi-dom0.c b/xen/arch/arm/efi/efi-dom0.c
index cf71bf4..c40a7c5 100644
--- a/xen/arch/arm/efi/efi-dom0.c
+++ b/xen/arch/arm/efi/efi-dom0.c
@@ -25,6 +25,7 @@
#include "efi-dom0.h"
#include <xen/sched.h>
#include <xen/pfn.h>
+#include <xen/libfdt/libfdt.h>
#include <asm/setup.h>
#include <asm/acpi.h>
#include "../../../common/decompress.h"
@@ -138,6 +139,44 @@ void __init acpi_create_efi_mmap_table(struct domain *d,
* (mem->nr_banks + acpi_mem.nr_banks + 1);
}
+/* Create /hypervisor/uefi node for efi properties. */
+int __init acpi_make_efi_nodes(void *fdt, struct membank tbl_add[])
+{
+ int res;
+
+ res = fdt_begin_node(fdt, "uefi");
+ if ( res )
+ return res;
+
+ res = fdt_property_u64(fdt, "xen,uefi-system-table",
+ tbl_add[TBL_EFIT].start);
+ if ( res )
+ return res;
+
+ res = fdt_property_u64(fdt, "xen,uefi-mmap-start",
+ tbl_add[TBL_MMAP].start);
+ if ( res )
+ return res;
+
+ res = fdt_property_u32(fdt, "xen,uefi-mmap-size",
+ tbl_add[TBL_MMAP].size);
+ if ( res )
+ return res;
+
+ res = fdt_property_u32(fdt, "xen,uefi-mmap-desc-size",
+ sizeof(EFI_MEMORY_DESCRIPTOR));
+ if ( res )
+ return res;
+
+ res = fdt_property_u32(fdt, "xen,uefi-mmap-desc-ver", 1);
+ if ( res )
+ return res;
+
+ res = fdt_end_node(fdt);
+
+ return res;
+}
+
/*
* Local variables:
* mode: C
diff --git a/xen/include/asm-arm/setup.h b/xen/include/asm-arm/setup.h
index 9a71e90..3da7a49 100644
--- a/xen/include/asm-arm/setup.h
+++ b/xen/include/asm-arm/setup.h
@@ -60,6 +60,8 @@ void acpi_create_efi_mmap_table(struct domain *d,
const struct meminfo *mem,
struct membank tbl_add[]);
+int acpi_make_efi_nodes(void *fdt, struct membank tbl_add[]);
+
int construct_dom0(struct domain *d);
void discard_initial_modules(void);
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-03-25 13:48 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-25 13:48 [PATCH v7 00/22] Prepare UEFI and ACPI tables for Dom0 on ARM64 Shannon Zhao
2016-03-25 13:48 ` [PATCH v7 01/22] arm/acpi: Estimate memory required for acpi/efi tables Shannon Zhao
2016-03-26 13:02 ` Stefano Stabellini
2016-03-29 10:24 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 02/22] arm/acpi: Add a helper function to get the acpi table offset Shannon Zhao
2016-03-29 10:48 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 03/22] arm/acpi: Prepare FADT table for Dom0 Shannon Zhao
2016-03-25 13:48 ` [PATCH v7 04/22] arm/gic: Add a new callback for creating MADT " Shannon Zhao
2016-03-29 12:47 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 05/22] arm/acpi: Prepare " Shannon Zhao
2016-03-25 13:48 ` [PATCH v7 06/22] arm/acpi: Prepare STAO " Shannon Zhao
2016-03-25 13:48 ` [PATCH v7 07/22] arm/acpi: Prepare XSDT " Shannon Zhao
2016-03-25 13:48 ` [PATCH v7 08/22] arm/acpi: Prepare RSDP " Shannon Zhao
2016-03-25 13:48 ` [PATCH v7 09/22] arm/p2m: Add helper functions to map memory regions Shannon Zhao
2016-03-29 12:49 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 10/22] arm/acpi: Map all other tables for Dom0 Shannon Zhao
2016-03-29 13:02 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 11/22] arm/acpi: Prepare EFI system table " Shannon Zhao
2016-03-29 14:54 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 12/22] arm/acpi: Prepare EFI memory descriptor " Shannon Zhao
2016-03-29 14:54 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 13/22] arm/acpi: Map the new created EFI and ACPI tables to Dom0 Shannon Zhao
2016-03-29 15:01 ` Julien Grall
2016-03-25 13:48 ` Shannon Zhao [this message]
2016-03-29 16:10 ` [PATCH v7 14/22] arm/acpi: Create min DT stub for Dom0 Julien Grall
2016-03-25 13:48 ` [PATCH v7 15/22] arm/acpi: Permit access all Xen unused SPIs " Shannon Zhao
2016-03-29 16:10 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 16/22] arm/acpi: Configure SPI interrupt type and route to Dom0 dynamically Shannon Zhao
2016-03-29 16:12 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 17/22] arm/gic: Add a new callback to deny Dom0 access to GIC regions Shannon Zhao
2016-03-26 13:04 ` Stefano Stabellini
2016-03-29 16:13 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 18/22] arm/acpi: Permit MMIO access of Xen unused devices for Dom0 Shannon Zhao
2016-03-25 13:48 ` [PATCH v7 19/22] hvm/params: Add a new delivery type for event-channel in HVM_PARAM_CALLBACK_IRQ Shannon Zhao
2016-03-29 16:16 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 20/22] xen/acpi: Fix event-channel interrupt when booting with ACPI Shannon Zhao
2016-03-29 16:16 ` Julien Grall
2016-03-25 13:48 ` [PATCH v7 21/22] xen/arm: Add a hypercall for device mmio mapping Shannon Zhao
2016-03-30 16:05 ` Konrad Rzeszutek Wilk
2016-03-30 16:07 ` Konrad Rzeszutek Wilk
2016-03-25 13:48 ` [PATCH v7 22/22] xen/arm64: Add ACPI support Shannon Zhao
2016-03-29 16:20 ` Julien Grall
2016-03-29 7:12 ` [PATCH v7 00/22] Prepare UEFI and ACPI tables for Dom0 on ARM64 Jan Beulich
2016-03-29 16:22 ` Julien Grall
2016-03-30 7:55 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458913735-2678-15-git-send-email-shannon.zhao@linaro.org \
--to=shannon.zhao@linaro.org \
--cc=julien.grall@arm.com \
--cc=peter.huangpeng@huawei.com \
--cc=stefano.stabellini@citrix.com \
--cc=xen-devel@lists.xen.org \
--cc=zhaoshenglong@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).