* [PATCH] kernel-parameters: document earlycon=xenboot @ 2016-04-05 2:48 Chris Patterson 0 siblings, 0 replies; 7+ messages in thread From: Chris Patterson @ 2016-04-05 2:48 UTC (permalink / raw) To: corbet Cc: Chris Patterson, xen-devel, stefano.stabellini, linux-kernel, linux-doc Add earlycon=xenboot option to Documentation/kernel-parameters.txt. Signed-off-by: Chris Patterson <cjp256@gmail.com> --- Documentation/kernel-parameters.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index ecc74fa..e01ec39 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1078,6 +1078,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. address. The serial port must already be setup and configured. Options are not yet supported. + xenboot Use Xen hypervisor console for early console. + earlyprintk= [X86,SH,BLACKFIN,ARM,M68k] earlyprintk=vga earlyprintk=efi -- 2.1.4 _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply related [flat|nested] 7+ messages in thread
[parent not found: <1459824491-15716-1-git-send-email-cjp256@gmail.com>]
* Re: [PATCH] kernel-parameters: document earlycon=xenboot [not found] <1459824491-15716-1-git-send-email-cjp256@gmail.com> @ 2016-04-05 13:49 ` Konrad Rzeszutek Wilk 2016-04-05 15:43 ` Chris Patterson [not found] ` <CABZSBQdyVhaDS+Ry0hWbj0ZDn1tH_Wm-NoCs-oPGy0TTzgXtXA@mail.gmail.com> 0 siblings, 2 replies; 7+ messages in thread From: Konrad Rzeszutek Wilk @ 2016-04-05 13:49 UTC (permalink / raw) To: Chris Patterson Cc: xen-devel, stefano.stabellini, linux-doc, linux-kernel, corbet On Mon, Apr 04, 2016 at 10:48:11PM -0400, Chris Patterson wrote: > Add earlycon=xenboot option to Documentation/kernel-parameters.txt. > But it is not true. I tried this on x86: "earlycon=xenboot console=tty0" And nothing from Linux came during earlyboot to the Xen console? > Signed-off-by: Chris Patterson <cjp256@gmail.com> > --- > Documentation/kernel-parameters.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt > index ecc74fa..e01ec39 100644 > --- a/Documentation/kernel-parameters.txt > +++ b/Documentation/kernel-parameters.txt > @@ -1078,6 +1078,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. > address. The serial port must already be setup > and configured. Options are not yet supported. > > + xenboot Use Xen hypervisor console for early console. > + > earlyprintk= [X86,SH,BLACKFIN,ARM,M68k] > earlyprintk=vga > earlyprintk=efi > -- > 2.1.4 > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] kernel-parameters: document earlycon=xenboot 2016-04-05 13:49 ` Konrad Rzeszutek Wilk @ 2016-04-05 15:43 ` Chris Patterson [not found] ` <CABZSBQdyVhaDS+Ry0hWbj0ZDn1tH_Wm-NoCs-oPGy0TTzgXtXA@mail.gmail.com> 1 sibling, 0 replies; 7+ messages in thread From: Chris Patterson @ 2016-04-05 15:43 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: xen-devel, Stefano Stabellini, linux-doc, linux-kernel, Jonathan Corbet On Tue, Apr 5, 2016 at 9:49 AM, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > On Mon, Apr 04, 2016 at 10:48:11PM -0400, Chris Patterson wrote: >> Add earlycon=xenboot option to Documentation/kernel-parameters.txt. >> > > But it is not true. > > I tried this on x86: "earlycon=xenboot console=tty0" > I can investigate further, but hopefully Stefano can chime in more definitively on what is supported. I used "earlycon=xenboot console=hvc0" with success for dom0 on my ARM64 platform. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <CABZSBQdyVhaDS+Ry0hWbj0ZDn1tH_Wm-NoCs-oPGy0TTzgXtXA@mail.gmail.com>]
* Re: [PATCH] kernel-parameters: document earlycon=xenboot [not found] ` <CABZSBQdyVhaDS+Ry0hWbj0ZDn1tH_Wm-NoCs-oPGy0TTzgXtXA@mail.gmail.com> @ 2016-04-05 16:42 ` Konrad Rzeszutek Wilk 2016-04-05 21:22 ` Chris Patterson ` (2 more replies) 0 siblings, 3 replies; 7+ messages in thread From: Konrad Rzeszutek Wilk @ 2016-04-05 16:42 UTC (permalink / raw) To: Chris Patterson Cc: xen-devel, Stefano Stabellini, linux-doc, linux-kernel, Jonathan Corbet On Tue, Apr 05, 2016 at 11:43:36AM -0400, Chris Patterson wrote: > On Tue, Apr 5, 2016 at 9:49 AM, Konrad Rzeszutek Wilk > <konrad.wilk@oracle.com> wrote: > > On Mon, Apr 04, 2016 at 10:48:11PM -0400, Chris Patterson wrote: > >> Add earlycon=xenboot option to Documentation/kernel-parameters.txt. > >> > > > > But it is not true. > > > > I tried this on x86: "earlycon=xenboot console=tty0" > > > > I can investigate further, but hopefully Stefano can chime in more > definitively on what is supported. > > I used "earlycon=xenboot console=hvc0" with success for dom0 on my > ARM64 platform. Perhaps the documentation should also have [ARM], like some of the other ones? _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] kernel-parameters: document earlycon=xenboot 2016-04-05 16:42 ` Konrad Rzeszutek Wilk @ 2016-04-05 21:22 ` Chris Patterson 2016-04-06 1:16 ` Stefano Stabellini [not found] ` <alpine.DEB.2.10.1604051812350.31453@sstabellini-ThinkPad-X230> 2 siblings, 0 replies; 7+ messages in thread From: Chris Patterson @ 2016-04-05 21:22 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: xen-devel, Stefano Stabellini, linux-doc, linux-kernel, Jonathan Corbet On Tue, Apr 5, 2016 at 12:42 PM, Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> wrote: > On Tue, Apr 05, 2016 at 11:43:36AM -0400, Chris Patterson wrote: >> On Tue, Apr 5, 2016 at 9:49 AM, Konrad Rzeszutek Wilk >> <konrad.wilk@oracle.com> wrote: >> > On Mon, Apr 04, 2016 at 10:48:11PM -0400, Chris Patterson wrote: >> >> Add earlycon=xenboot option to Documentation/kernel-parameters.txt. >> >> >> > >> > But it is not true. >> > >> > I tried this on x86: "earlycon=xenboot console=tty0" >> > >> >> I can investigate further, but hopefully Stefano can chime in more >> definitively on what is supported. >> >> I used "earlycon=xenboot console=hvc0" with success for dom0 on my >> ARM64 platform. > > Perhaps the documentation should also have [ARM], like some of the > other ones? Absolutely. I will test some combinations and be explicit about what should work in v2. Thanks for the feedback. Cheers, -Chris _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] kernel-parameters: document earlycon=xenboot 2016-04-05 16:42 ` Konrad Rzeszutek Wilk 2016-04-05 21:22 ` Chris Patterson @ 2016-04-06 1:16 ` Stefano Stabellini [not found] ` <alpine.DEB.2.10.1604051812350.31453@sstabellini-ThinkPad-X230> 2 siblings, 0 replies; 7+ messages in thread From: Stefano Stabellini @ 2016-04-06 1:16 UTC (permalink / raw) To: Konrad Rzeszutek Wilk Cc: Jonathan Corbet, Chris Patterson, linux-doc, linux-kernel, xen-devel, Stefano Stabellini On Tue, 5 Apr 2016, Konrad Rzeszutek Wilk wrote: > On Tue, Apr 05, 2016 at 11:43:36AM -0400, Chris Patterson wrote: > > On Tue, Apr 5, 2016 at 9:49 AM, Konrad Rzeszutek Wilk > > <konrad.wilk@oracle.com> wrote: > > > On Mon, Apr 04, 2016 at 10:48:11PM -0400, Chris Patterson wrote: > > >> Add earlycon=xenboot option to Documentation/kernel-parameters.txt. > > >> > > > > > > But it is not true. > > > > > > I tried this on x86: "earlycon=xenboot console=tty0" Was it a PV guest? Do you have SERIAL_EARLYCON enabled in your kconfig? Does Xen allow DomU debug output via HYPERVISOR_console_io in your config? > > I can investigate further, but hopefully Stefano can chime in more > > definitively on what is supported. > > > > I used "earlycon=xenboot console=hvc0" with success for dom0 on my > > ARM64 platform. > > Perhaps the documentation should also have [ARM], like some of the > other ones? > I don't recall whether I actually tested earlycon on x86, but looking at the code it should work, at least for PV guests (you need to be able to issue hypercalls and HVM guests cannot do that until they map the hypercall page). In any case given that x86 has earlyprintk, specifying xenboot as only available for ARM and ARM64 is also OK for me, but I would prefer to keep it arch-independent given that earlycon is. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <alpine.DEB.2.10.1604051812350.31453@sstabellini-ThinkPad-X230>]
* Re: [PATCH] kernel-parameters: document earlycon=xenboot [not found] ` <alpine.DEB.2.10.1604051812350.31453@sstabellini-ThinkPad-X230> @ 2016-04-08 14:41 ` Konrad Rzeszutek Wilk 0 siblings, 0 replies; 7+ messages in thread From: Konrad Rzeszutek Wilk @ 2016-04-08 14:41 UTC (permalink / raw) To: Stefano Stabellini Cc: Jonathan Corbet, Chris Patterson, linux-doc, linux-kernel, xen-devel, Stefano Stabellini On Tue, Apr 05, 2016 at 06:16:35PM -0700, Stefano Stabellini wrote: > On Tue, 5 Apr 2016, Konrad Rzeszutek Wilk wrote: > > On Tue, Apr 05, 2016 at 11:43:36AM -0400, Chris Patterson wrote: > > > On Tue, Apr 5, 2016 at 9:49 AM, Konrad Rzeszutek Wilk > > > <konrad.wilk@oracle.com> wrote: > > > > On Mon, Apr 04, 2016 at 10:48:11PM -0400, Chris Patterson wrote: > > > >> Add earlycon=xenboot option to Documentation/kernel-parameters.txt. > > > >> > > > > > > > > But it is not true. > > > > > > > > I tried this on x86: "earlycon=xenboot console=tty0" > > Was it a PV guest? Do you have SERIAL_EARLYCON enabled in your kconfig? Yes, dom0 in fact. > Does Xen allow DomU debug output via HYPERVISOR_console_io in your config? Yes. That works. > > > > > I can investigate further, but hopefully Stefano can chime in more > > > definitively on what is supported. > > > > > > I used "earlycon=xenboot console=hvc0" with success for dom0 on my > > > ARM64 platform. > > > > Perhaps the documentation should also have [ARM], like some of the > > other ones? > > > > I don't recall whether I actually tested earlycon on x86, but looking at > the code it should work, at least for PV guests (you need to be able to > issue hypercalls and HVM guests cannot do that until they map the > hypercall page). > > In any case given that x86 has earlyprintk, specifying > xenboot as only available for ARM and ARM64 is also OK for me, but I > would prefer to keep it arch-independent given that earlycon is. /me nods. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-04-08 14:42 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-05 2:48 [PATCH] kernel-parameters: document earlycon=xenboot Chris Patterson
[not found] <1459824491-15716-1-git-send-email-cjp256@gmail.com>
2016-04-05 13:49 ` Konrad Rzeszutek Wilk
2016-04-05 15:43 ` Chris Patterson
[not found] ` <CABZSBQdyVhaDS+Ry0hWbj0ZDn1tH_Wm-NoCs-oPGy0TTzgXtXA@mail.gmail.com>
2016-04-05 16:42 ` Konrad Rzeszutek Wilk
2016-04-05 21:22 ` Chris Patterson
2016-04-06 1:16 ` Stefano Stabellini
[not found] ` <alpine.DEB.2.10.1604051812350.31453@sstabellini-ThinkPad-X230>
2016-04-08 14:41 ` Konrad Rzeszutek Wilk
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).