xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Juergen Gross <jgross@suse.com>
To: xen-devel@lists.xenproject.org, linux-kernel@vger.kernel.org
Cc: Juergen Gross <jgross@suse.com>,
	boris.ostrovsky@oracle.com, sstabellini@kernel.org,
	david.vrabel@citrix.com
Subject: [PATCH 3/3] xen: support runqueue steal time on xen
Date: Wed, 22 Jun 2016 09:03:54 +0200	[thread overview]
Message-ID: <1466579034-12113-4-git-send-email-jgross@suse.com> (raw)
In-Reply-To: <1466579034-12113-1-git-send-email-jgross@suse.com>

Up to now reading the stolen time of a remote cpu was not possible in a
performant way under Xen. This made support of runqueue steal time via
paravirt_steal_rq_enabled impossible.

With the addition of an appropriate hypervisor interface this is now
possible, so add the support.

Signed-off-by: Juergen Gross <jgross@suse.com>
---
 drivers/xen/time.c | 42 +++++++++++++++++++++++++-----------------
 1 file changed, 25 insertions(+), 17 deletions(-)

diff --git a/drivers/xen/time.c b/drivers/xen/time.c
index 2257b66..65afbe9 100644
--- a/drivers/xen/time.c
+++ b/drivers/xen/time.c
@@ -19,6 +19,9 @@
 /* runstate info updated by Xen */
 static DEFINE_PER_CPU(struct vcpu_runstate_info, xen_runstate);
 
+/* runstate info of remote cpu accessible */
+static bool xen_runstate_remote;
+
 /* return an consistent snapshot of 64-bit time/counter value */
 static u64 get64(const u64 *p)
 {
@@ -47,27 +50,31 @@ static u64 get64(const u64 *p)
 	return ret;
 }
 
-/*
- * Runstate accounting
- */
-void xen_get_runstate_snapshot(struct vcpu_runstate_info *res)
+static void xen_get_runstate_snapshot_cpu(struct vcpu_runstate_info *res,
+					  unsigned int cpu)
 {
 	u64 state_time;
 	struct vcpu_runstate_info *state;
 
 	BUG_ON(preemptible());
 
-	state = this_cpu_ptr(&xen_runstate);
+	state = per_cpu_ptr(&xen_runstate, cpu);
 
-	/*
-	 * The runstate info is always updated by the hypervisor on
-	 * the current CPU, so there's no need to use anything
-	 * stronger than a compiler barrier when fetching it.
-	 */
 	do {
 		state_time = get64(&state->state_entry_time);
+		rmb();	/* Hypervisor might update data. */
 		*res = READ_ONCE(*state);
-	} while (get64(&state->state_entry_time) != state_time);
+		rmb();	/* Hypervisor might update data. */
+	} while (get64(&state->state_entry_time) != state_time ||
+		 (state_time & XEN_RUNSTATE_UPDATE));
+}
+
+/*
+ * Runstate accounting
+ */
+void xen_get_runstate_snapshot(struct vcpu_runstate_info *res)
+{
+	xen_get_runstate_snapshot_cpu(res, smp_processor_id());
 }
 
 /* return true when a vcpu could run but has no real cpu to run on */
@@ -80,8 +87,8 @@ static u64 xen_steal_clock(int cpu)
 {
 	struct vcpu_runstate_info state;
 
-	BUG_ON(cpu != smp_processor_id());
-	xen_get_runstate_snapshot(&state);
+	BUG_ON(!xen_runstate_remote && cpu != smp_processor_id());
+	xen_get_runstate_snapshot_cpu(&state, cpu);
 	return state.time[RUNSTATE_runnable] + state.time[RUNSTATE_offline];
 }
 
@@ -98,11 +105,12 @@ void xen_setup_runstate_info(int cpu)
 
 void __init xen_time_setup_guest(void)
 {
+	xen_runstate_remote = !HYPERVISOR_vm_assist(VMASST_CMD_enable,
+					VMASST_TYPE_runstate_update_flag);
+
 	pv_time_ops.steal_clock = xen_steal_clock;
 
 	static_key_slow_inc(&paravirt_steal_enabled);
-	/*
-	 * We can't set paravirt_steal_rq_enabled as this would require the
-	 * capability to read another cpu's runstate info.
-	 */
+	if (xen_runstate_remote)
+		static_key_slow_inc(&paravirt_steal_rq_enabled);
 }
-- 
2.6.6


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

  parent reply	other threads:[~2016-06-22  7:04 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-22  7:03 [PATCH 0/3] xen: add full support for CONFIG_PARAVIRT_TIME_ACCOUNTING Juergen Gross
2016-06-22  7:03 ` [PATCH 1/3] xen: update xen headers Juergen Gross
2016-07-05 15:07   ` Stefano Stabellini
2016-06-22  7:03 ` [PATCH 2/3] arm/xen: add support for vm_assist hypercall Juergen Gross
2016-06-22  7:03 ` Juergen Gross [this message]
2016-07-05 15:23   ` [PATCH 3/3] xen: support runqueue steal time on xen Stefano Stabellini
2016-07-06  4:25     ` Juergen Gross
2016-06-22 15:48 ` [PATCH 0/3] xen: add full support for CONFIG_PARAVIRT_TIME_ACCOUNTING Boris Ostrovsky
     [not found] ` <1466579034-12113-3-git-send-email-jgross@suse.com>
2016-07-04  9:21   ` [PATCH 2/3] arm/xen: add support for vm_assist hypercall Juergen Gross
2016-07-04 11:20   ` Julien Grall
2016-07-05 15:03   ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466579034-12113-4-git-send-email-jgross@suse.com \
    --to=jgross@suse.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=david.vrabel@citrix.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).