Xen-Devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] x86/IO-APIC: dump full destination ID in x2APIC mode
@ 2019-04-02 13:04 Jan Beulich
  2019-05-13 13:55 ` Wei Liu
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Jan Beulich @ 2019-04-02 13:04 UTC (permalink / raw)
  To: xen-devel; +Cc: Andrew Cooper, Wei Liu, Roger Pau Monne

In x2APIC mode it is 32 bits wide.

In __print_IO_APIC() drop logging of both physical and logical IDs:
The latter covers a superset of the bits of the former in the RTE, and
we write full 8-bit values anyway even in physical mode for all ordinary
interrupts, regardless of INT_DEST_MODE (see the users of SET_DEST()).

Adjust other column arrangement (and heading) a little as well.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
I'm sure I had found some place where the wider destination ID is
documented for physical mode, but I wasn't able to find it again when I
searched now. All Intel chipset docs I've looked at claim it's only 4
bits that are used / supposed to be stored.

--- a/xen/arch/x86/io_apic.c
+++ b/xen/arch/x86/io_apic.c
@@ -1191,21 +1191,21 @@ static void /*__init*/ __print_IO_APIC(b
 
 	printk(KERN_DEBUG ".... IRQ redirection table:\n");
 
-	printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
-               " Stat Dest Deli Vect:   \n");
+	printk(KERN_DEBUG " NR %s Msk Trg IRR Pol Stat DstM DelM Vec\n",
+               x2apic_enabled ? " DestID" : "Dst");
 
 	for (i = 0; i <= reg_01.bits.entries; i++) {
             struct IO_APIC_route_entry entry;
 
             entry = ioapic_read_entry(apic, i, 0);
 
-            printk(KERN_DEBUG " %02x %03X %02X  ",
-                   i,
-                   entry.dest.logical.logical_dest,
-                   entry.dest.physical.physical_dest
-		);
+            if ( x2apic_enabled )
+                printk(KERN_DEBUG " %02x %08x", i, entry.dest.dest32);
+            else
+                printk(KERN_DEBUG " %02x  %02x ", i,
+                       entry.dest.logical.logical_dest);
 
-            printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
+            printk(" %d   %d   %d   %d   %d    %d    %d    %02X\n",
                    entry.mask,
                    entry.trigger,
                    entry.irr,
@@ -2481,12 +2481,14 @@ void dump_ioapic_irq_info(void)
             rte = ioapic_read_entry(entry->apic, pin, 0);
 
             printk("vec=%02x delivery=%-5s dest=%c status=%d "
-                   "polarity=%d irr=%d trig=%c mask=%d dest_id:%d\n",
+                   "polarity=%d irr=%d trig=%c mask=%d dest_id:%0*x\n",
                    rte.vector, delivery_mode_2_str(rte.delivery_mode),
                    rte.dest_mode ? 'L' : 'P',
                    rte.delivery_status, rte.polarity, rte.irr,
                    rte.trigger ? 'L' : 'E', rte.mask,
-                   rte.dest.logical.logical_dest);
+                   x2apic_enabled ? 8 : 2,
+                   x2apic_enabled ? rte.dest.dest32
+                                  : rte.dest.logical.logical_dest);
 
             if ( entry->next == 0 )
                 break;





_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-02 13:04 [PATCH] x86/IO-APIC: dump full destination ID in x2APIC mode Jan Beulich
2019-05-13 13:55 ` Wei Liu
2019-05-13 13:55   ` [Xen-devel] " Wei Liu
     [not found] ` <5CA35DE902000000001041B1@prv1-mh.provo.novell.com>
     [not found]   ` <5CA35DE90200007800232A87@prv1-mh.provo.novell.com>
2019-05-27  9:28     ` Ping: " Jan Beulich
2019-05-27  9:28       ` [Xen-devel] " Jan Beulich
2019-06-17  8:22       ` [Xen-devel] Ping²: " Jan Beulich
2019-06-17 15:10 ` [Xen-devel] " Andrew Cooper

Xen-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/xen-devel/0 xen-devel/git/0.git
	git clone --mirror https://lore.kernel.org/xen-devel/1 xen-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 xen-devel xen-devel/ https://lore.kernel.org/xen-devel \
		xen-devel@lists.xenproject.org xen-devel@archiver.kernel.org
	public-inbox-index xen-devel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.xenproject.lists.xen-devel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox