xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Julien Grall <julien.grall@arm.com>
To: xen-devel@lists.xenproject.org
Cc: Julien Grall <julien.grall@arm.com>,
	Stefano Stabellini <sstabellini@kernel.org>,
	Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
Subject: [Xen-devel] [PATCH v3 10/28] xen/arm32: head: Don't clobber r14/lr in the macro PRINT
Date: Mon, 12 Aug 2019 18:30:01 +0100	[thread overview]
Message-ID: <20190812173019.11956-11-julien.grall@arm.com> (raw)
In-Reply-To: <20190812173019.11956-1-julien.grall@arm.com>

The current implementation of the macro PRINT will clobber r14/lr. This
means the user should save r14 if it cares about it.

Follow-up patches will introduce more use of PRINT in places where lr
should be preserved. Rather than requiring all the user to preserve lr,
the macro PRINT is modified to save and restore it.

While the comment state r3 will be clobbered, this is not the case. So
PRINT will use r3 to preserve lr.

Lastly, take the opportunity to move the comment on top of PRINT and use
PRINT in init_uart. Both changes will be helpful in a follow-up patch.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>

---
    Changes in v3:
        - Add Stefano's acked-by

    Changes in v2:
        - Patch added
---
 xen/arch/arm/arm32/head.S | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index 8b4c8a4714..b54331c19d 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -64,15 +64,20 @@
  *   r14 - LR
  *   r15 - PC
  */
-/* Macro to print a string to the UART, if there is one.
- * Clobbers r0-r3. */
 #ifdef CONFIG_EARLY_PRINTK
-#define PRINT(_s)       \
-        adr   r0, 98f ; \
-        bl    puts    ; \
-        b     99f     ; \
-98:     .asciz _s     ; \
-        .align 2      ; \
+/*
+ * Macro to print a string to the UART, if there is one.
+ *
+ * Clobbers r0 - r3
+ */
+#define PRINT(_s)           \
+        mov   r3, lr       ;\
+        adr   r0, 98f      ;\
+        bl    puts         ;\
+        mov   lr, r3       ;\
+        b     99f          ;\
+98:     .asciz _s          ;\
+        .align 2           ;\
 99:
 #else /* CONFIG_EARLY_PRINTK */
 #define PRINT(s)
@@ -500,10 +505,8 @@ init_uart:
 #ifdef EARLY_PRINTK_INIT_UART
         early_uart_init r11, r1, r2
 #endif
-        adr   r0, 1f
-        b     puts                  /* Jump to puts */
-1:      .asciz "- UART enabled -\r\n"
-        .align 4
+        PRINT("- UART enabled -\r\n")
+        mov   pc, lr
 
 /*
  * Print early debug messages.
-- 
2.11.0


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply	other threads:[~2019-08-12 17:30 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-12 17:29 [Xen-devel] [PATCH v3 00/28] xen/arm: Rework head.S to make it more compliant with the Arm Arm Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 01/28] xen/arm: lpae: Allow more LPAE helpers to be used in assembly Julien Grall
2019-08-22 17:07   ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 02/28] xen/arm64: head: Remove 1:1 mapping as soon as it is not used Julien Grall
2019-08-22 17:58   ` Stefano Stabellini
2019-08-22 18:25     ` Julien Grall
2019-08-22 18:29       ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 03/28] xen/arm64: head: Rework and document setup_fixmap() Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 04/28] xen/arm64: head: Rework and document launch() Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 05/28] xen/arm64: head: Setup TTBR_EL2 in enable_mmu() and add missing isb Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 06/28] xen/arm64: head: Introduce a macro to get a PC-relative address of a symbol Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 07/28] xen/arm64: head: Fix typo in the documentation on top of init_uart() Julien Grall
2019-08-22 17:08   ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 08/28] xen/arm32: head: Add a macro to move an immediate constant into a 32-bit register Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 09/28] xen/arm32: head: Mark the end of subroutines with ENDPROC Julien Grall
2019-08-12 17:33   ` Julien Grall
2019-08-12 17:30 ` Julien Grall [this message]
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 11/28] xen/arm32: head: Rework UART initialization on boot CPU Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 12/28] xen/arm32: head: Introduce print_reg Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 13/28] xen/arm32: head: Introduce distinct paths for the boot CPU and secondary CPUs Julien Grall
2019-08-22 17:11   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 14/28] xen/arm32: head: Rework and document check_cpu_mode() Julien Grall
2019-08-22 17:14   ` Stefano Stabellini
2019-09-07 10:35     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 15/28] xen/arm32: head: Rework and document zero_bss() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 16/28] xen/arm32: head: Document create_pages_tables() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 17/28] xen/arm32: head: Document enable_mmu() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 18/28] xen/arm32: head: Move assembly switch to the runtime PT in secondary CPUs path Julien Grall
2019-08-22 17:17   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 19/28] xen/arm32: head: Don't setup the fixmap on secondary CPUs Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 20/28] xen/arm32: head: Remove 1:1 mapping as soon as it is not used Julien Grall
2019-08-22 18:17   ` Stefano Stabellini
2019-08-22 18:31     ` Julien Grall
2019-08-22 22:53       ` Stefano Stabellini
2019-08-22 23:39         ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 21/28] xen/arm32: head: Rework and document setup_fixmap() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 22/28] xen/arm32: head: Rework and document launch() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 23/28] xen/arm32: head: Setup HTTBR in enable_mmu() and add missing isb Julien Grall
2019-08-22 17:15   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 24/28] xen/arm: Zero BSS after the MMU and D-cache is turned on Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 25/28] xen/arm64: head: Introduce macros to create table and mapping entry Julien Grall
2019-08-22 23:31   ` Stefano Stabellini
2019-08-22 23:44     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 26/28] xen/arm64: head: Use a page mapping for the 1:1 mapping in create_page_tables() Julien Grall
2019-08-24  1:16   ` Stefano Stabellini
2019-09-17 17:53     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 27/28] xen/arm32: head: Introduce macros to create table and mapping entry Julien Grall
2019-08-23  1:10   ` Stefano Stabellini
2019-08-23  9:40     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 28/28] xen/arm32: head: Use a page mapping for the 1:1 mapping in create_page_tables() Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190812173019.11956-11-julien.grall@arm.com \
    --to=julien.grall@arm.com \
    --cc=Volodymyr_Babchuk@epam.com \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).