xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Pawel Wieczorkiewicz <wipawel@amazon.de>
To: <xen-devel@lists.xen.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>, Wei Liu <wl@xen.org>,
	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
	George Dunlap <George.Dunlap@eu.citrix.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Ross Lagerwall <ross.lagerwall@citrix.com>,
	Ian Jackson <ian.jackson@eu.citrix.com>, Tim Deegan <tim@xen.org>,
	mpohlack@amazon.de, wipawel@amazon.de,
	Julien Grall <julien.grall@arm.com>,
	Jan Beulich <jbeulich@suse.com>,
	xen-devel@lists.xenproject.org
Subject: [Xen-devel] [livepatch: independ. modules v2 2/3] livepatch: Allow to override inter-modules buildid dependency
Date: Tue, 20 Aug 2019 13:28:54 +0000	[thread overview]
Message-ID: <20190820132854.110843-1-wipawel@amazon.de> (raw)
In-Reply-To: <20190416125832.32881-2-wipawel@amazon.de>

By default Livepatch enforces the following buildid-based dependency
chain between hotpatch modules:
  1) first module depends on given hypervisor buildid
  2) every consecutive module depends on previous module's buildid
This way proper hotpatch stack order is maintained and enforced.
While it is important for production hotpatches it limits agility and
blocks usage of testing or debug hotpatches. These kinds of hotpatch
modules are typically expected to be loaded at any time irrespective
of current state of the modules stack.

To enable testing and debug hotpatches allow user dynamically ignore
the inter-modules dependency. In this case only hypervisor buildid
match is verified and enforced.

To allow userland pass additional paremeters for livepatch actions
add support for action flags.
Each of the apply, revert, unload and revert action gets additional
64-bit parameter 'flags' where extra flags can be applied in a mask
form.
Initially only one flag '--nodeps' is added for the apply action.
This flag modifies the default buildid dependency check as described
above.
The global sysctl interface input flag parameter is defined with a
single corresponding flag macro:
  LIVEPATCH_ACTION_APPLY_NODEPS (1 << 0)

The userland xen-livepatch tool is modified to support the '--nodeps'
flag for apply and load commands. A general mechanism for specifying
more flags in the future for apply and other action is however added.

Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Eslam Elnikety <elnikety@amazon.de>
Reviewed-by: Petre Eftime <epetre@amazon.com>
Reviewed-by: Leonard Foerster <foersleo@amazon.de>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Reviewed-by: Norbert Manthey <nmanthey@amazon.de>
---
v2:
* Bump XEN_SYSCTL_INTERFACE_VERSION to 0x00000013
---
 tools/libxc/include/xenctrl.h |   9 ++--
 tools/libxc/xc_misc.c         |  20 +++----
 tools/misc/xen-livepatch.c    | 121 +++++++++++++++++++++++++++++++++++-------
 xen/common/livepatch.c        |  14 +++--
 xen/include/public/sysctl.h   |  11 +++-
 5 files changed, 139 insertions(+), 36 deletions(-)

diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index 0ff6ed9e70..725697c132 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -2607,11 +2607,12 @@ int xc_livepatch_list(xc_interface *xch, unsigned int max, unsigned int start,
  * to complete them. The `timeout` offers an option to expire the
  * operation if it could not be completed within the specified time
  * (in ns). Value of 0 means let hypervisor decide the best timeout.
+ * The `flags` allows to pass extra parameters to the actions.
  */
-int xc_livepatch_apply(xc_interface *xch, char *name, uint32_t timeout);
-int xc_livepatch_revert(xc_interface *xch, char *name, uint32_t timeout);
-int xc_livepatch_unload(xc_interface *xch, char *name, uint32_t timeout);
-int xc_livepatch_replace(xc_interface *xch, char *name, uint32_t timeout);
+int xc_livepatch_apply(xc_interface *xch, char *name, uint32_t timeout, uint64_t flags);
+int xc_livepatch_revert(xc_interface *xch, char *name, uint32_t timeout, uint64_t flags);
+int xc_livepatch_unload(xc_interface *xch, char *name, uint32_t timeout, uint64_t flags);
+int xc_livepatch_replace(xc_interface *xch, char *name, uint32_t timeout, uint64_t flags);
 
 /*
  * Ensure cache coherency after memory modifications. A call to this function
diff --git a/tools/libxc/xc_misc.c b/tools/libxc/xc_misc.c
index 8e60b6e9f0..a8e9e7d1e2 100644
--- a/tools/libxc/xc_misc.c
+++ b/tools/libxc/xc_misc.c
@@ -854,7 +854,8 @@ int xc_livepatch_list(xc_interface *xch, unsigned int max, unsigned int start,
 static int _xc_livepatch_action(xc_interface *xch,
                                 char *name,
                                 unsigned int action,
-                                uint32_t timeout)
+                                uint32_t timeout,
+                                uint64_t flags)
 {
     int rc;
     DECLARE_SYSCTL;
@@ -880,6 +881,7 @@ static int _xc_livepatch_action(xc_interface *xch,
     sysctl.u.livepatch.pad = 0;
     sysctl.u.livepatch.u.action.cmd = action;
     sysctl.u.livepatch.u.action.timeout = timeout;
+    sysctl.u.livepatch.u.action.flags = flags;
 
     sysctl.u.livepatch.u.action.name = def_name;
     set_xen_guest_handle(sysctl.u.livepatch.u.action.name.name, name);
@@ -891,24 +893,24 @@ static int _xc_livepatch_action(xc_interface *xch,
     return rc;
 }
 
-int xc_livepatch_apply(xc_interface *xch, char *name, uint32_t timeout)
+int xc_livepatch_apply(xc_interface *xch, char *name, uint32_t timeout, uint64_t flags)
 {
-    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_APPLY, timeout);
+    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_APPLY, timeout, flags);
 }
 
-int xc_livepatch_revert(xc_interface *xch, char *name, uint32_t timeout)
+int xc_livepatch_revert(xc_interface *xch, char *name, uint32_t timeout, uint64_t flags)
 {
-    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_REVERT, timeout);
+    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_REVERT, timeout, flags);
 }
 
-int xc_livepatch_unload(xc_interface *xch, char *name, uint32_t timeout)
+int xc_livepatch_unload(xc_interface *xch, char *name, uint32_t timeout, uint64_t flags)
 {
-    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_UNLOAD, timeout);
+    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_UNLOAD, timeout, flags);
 }
 
-int xc_livepatch_replace(xc_interface *xch, char *name, uint32_t timeout)
+int xc_livepatch_replace(xc_interface *xch, char *name, uint32_t timeout, uint64_t flags)
 {
-    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_REPLACE, timeout);
+    return _xc_livepatch_action(xch, name, LIVEPATCH_ACTION_REPLACE, timeout, flags);
 }
 
 /*
diff --git a/tools/misc/xen-livepatch.c b/tools/misc/xen-livepatch.c
index 3233472157..a37b2457ff 100644
--- a/tools/misc/xen-livepatch.c
+++ b/tools/misc/xen-livepatch.c
@@ -23,18 +23,23 @@ void show_help(void)
 {
     fprintf(stderr,
             "xen-livepatch: live patching tool\n"
-            "Usage: xen-livepatch <command> [args]\n"
+            "Usage: xen-livepatch <command> [args] [command-flags]\n"
             " <name> An unique name of payload. Up to %d characters.\n"
             "Commands:\n"
             "  help                   display this help\n"
             "  upload <name> <file>   upload file <file> with <name> name\n"
             "  list                   list payloads uploaded.\n"
-            "  apply <name>           apply <name> patch.\n"
+            "  apply <name> [flags]   apply <name> patch.\n"
+            "    Supported flags:\n"
+            "      --nodeps           Disable inter-module buildid dependency check.\n"
+            "                         Check only against hypervisor buildid.\n"
             "  revert <name>          revert name <name> patch.\n"
             "  replace <name>         apply <name> patch and revert all others.\n"
             "  unload <name>          unload name <name> patch.\n"
-            "  load  <file>           upload and apply <file>.\n"
-            "                         name is the <file> name\n",
+            "  load <file> [flags]    upload and apply <file> with name as the <file> name\n"
+            "    Supported flags:\n"
+            "      --nodeps           Disable inter-module buildid dependency check.\n"
+            "                         Check only against hypervisor buildid.\n",
             XEN_LIVEPATCH_NAME_SIZE);
 }
 
@@ -225,12 +230,13 @@ static int upload_func(int argc, char *argv[])
     return rc;
 }
 
-/* These MUST match to the 'action_options[]' array slots. */
+/* These MUST match to the 'action_options[]' and 'flag_options[]' array slots. */
 enum {
     ACTION_APPLY = 0,
     ACTION_REVERT = 1,
     ACTION_UNLOAD = 2,
     ACTION_REPLACE = 3,
+    ACTION_NUM
 };
 
 struct {
@@ -238,7 +244,7 @@ struct {
     int expected; /* The state to be in after the function. */
     const char *name;
     const char *verb;
-    int (*function)(xc_interface *xch, char *name, uint32_t timeout);
+    int (*function)(xc_interface *xch, char *name, uint32_t timeout, uint64_t flags);
 } action_options[] = {
     {   .allow = LIVEPATCH_STATE_CHECKED,
         .expected = LIVEPATCH_STATE_APPLIED,
@@ -266,6 +272,66 @@ struct {
     },
 };
 
+/*
+ * This structure defines supported flag options for actions.
+ * It defines entries for each action and supports up to 64
+ * flags per action.
+ */
+struct {
+    const char *name;
+    const uint64_t flag;
+} flag_options[ACTION_NUM][8 * sizeof(uint64_t)] = {
+    { /* ACTION_APPLY */
+        {   .name = "--nodeps",
+            .flag = LIVEPATCH_ACTION_APPLY_NODEPS,
+        },
+    },
+    { /* ACTION_REVERT */
+    },
+    { /* ACTION_UNLOAD */
+    },
+    { /* ACTION_REPLACE */
+    }
+};
+
+/*
+ * Parse user provided action flags.
+ * This function expects to only receive an array of input parameters being flags.
+ * Expected action is specified via idx paramater (index of flag_options[]).
+ */
+static int get_flags(int argc, char *argv[], unsigned int idx, uint64_t *flags)
+{
+    int i, j;
+
+    if ( !flags || idx >= ARRAY_SIZE(flag_options) )
+        return -1;
+
+    *flags = 0;
+    for ( i = 0; i < argc; i++ )
+    {
+        for ( j = 0; j < ARRAY_SIZE(flag_options[idx]); j++ )
+        {
+            if ( !flag_options[idx][j].name )
+                goto error;
+
+            if ( !strcmp(flag_options[idx][j].name, argv[i]) )
+            {
+                *flags |= flag_options[idx][j].flag;
+                break;
+            }
+        }
+
+        if ( j == ARRAY_SIZE(flag_options[idx]) )
+            goto error;
+    }
+
+    return 0;
+error:
+    fprintf(stderr, "Unsupported flag: %s.\n", argv[i]);
+    errno = EINVAL;
+    return errno;
+}
+
 /* The hypervisor timeout for the live patching operation is 30 msec,
  * but it could take some time for the operation to start, so wait twice
  * that period. */
@@ -291,8 +357,9 @@ int action_func(int argc, char *argv[], unsigned int idx)
     char name[XEN_LIVEPATCH_NAME_SIZE];
     int rc;
     xen_livepatch_status_t status;
+    uint64_t flags;
 
-    if ( argc != 1 )
+    if ( argc < 1 )
     {
         show_help();
         return -1;
@@ -301,7 +368,10 @@ int action_func(int argc, char *argv[], unsigned int idx)
     if ( idx >= ARRAY_SIZE(action_options) )
         return -1;
 
-    if ( get_name(argc, argv, name) )
+    if ( get_name(argc--, argv++, name) )
+        return EINVAL;
+
+    if ( get_flags(argc, argv, idx, &flags) )
         return EINVAL;
 
     /* Check initial status. */
@@ -332,7 +402,7 @@ int action_func(int argc, char *argv[], unsigned int idx)
     if ( action_options[idx].allow & status.state )
     {
         printf("%s %s... ", action_options[idx].verb, name);
-        rc = action_options[idx].function(xch, name, HYPERVISOR_TIMEOUT_NS);
+        rc = action_options[idx].function(xch, name, HYPERVISOR_TIMEOUT_NS, flags);
         if ( rc )
         {
             int saved_errno = errno;
@@ -394,17 +464,23 @@ int action_func(int argc, char *argv[], unsigned int idx)
 
 static int load_func(int argc, char *argv[])
 {
-    int rc;
-    char *new_argv[2];
-    char *path, *name, *lastdot;
+    int i, rc = ENOMEM;
+    char *upload_argv[2];
+    char **apply_argv, *path, *name, *lastdot;
 
-    if ( argc != 1 )
+    if ( argc < 1 )
     {
         show_help();
         return -1;
     }
+
+    /* apply action has <id> [flags] input requirement, which must be constructed */
+    apply_argv = (char **) malloc(argc * sizeof(*apply_argv));
+    if ( !apply_argv )
+        return rc;
+
     /* <file> */
-    new_argv[1] = argv[0];
+    upload_argv[1] = argv[0];
 
     /* Synthesize the <id> */
     path = strdup(argv[0]);
@@ -413,16 +489,23 @@ static int load_func(int argc, char *argv[])
     lastdot = strrchr(name, '.');
     if ( lastdot != NULL )
         *lastdot = '\0';
-    new_argv[0] = name;
+    upload_argv[0] = name;
+    apply_argv[0] = name;
 
-    rc = upload_func(2 /* <id> <file> */, new_argv);
+    /* Fill in all user provided flags */
+    for ( i = 0; i < argc - 1; i++ )
+        apply_argv[i + 1] = argv[i + 1];
+
+    rc = upload_func(2 /* <id> <file> */, upload_argv);
     if ( rc )
-        return rc;
+        goto error;
 
-    rc = action_func(1 /* only <id> */, new_argv, ACTION_APPLY);
+    rc = action_func(argc, apply_argv, ACTION_APPLY);
     if ( rc )
-        action_func(1, new_argv, ACTION_UNLOAD);
+        action_func(1 /* only <id> */, upload_argv, ACTION_UNLOAD);
 
+error:
+    free(apply_argv);
     free(path);
     return rc;
 }
diff --git a/xen/common/livepatch.c b/xen/common/livepatch.c
index 6a4af6ce57..fb91d5095c 100644
--- a/xen/common/livepatch.c
+++ b/xen/common/livepatch.c
@@ -1575,9 +1575,17 @@ static int livepatch_action(struct xen_sysctl_livepatch_action *action)
                 break;
             }
 
-            rc = build_id_dep(data, !!list_empty(&applied_list));
-            if ( rc )
-                break;
+            /*
+             * Check if action is issued with nodeps flags to ignore module
+             * stack dependencies.
+             */
+            if ( !(action->flags & LIVEPATCH_ACTION_APPLY_NODEPS) )
+            {
+                rc = build_id_dep(data, !!list_empty(&applied_list));
+                if ( rc )
+                    break;
+            }
+
             data->rc = -EAGAIN;
             rc = schedule_work(data, action->cmd, action->timeout);
         }
diff --git a/xen/include/public/sysctl.h b/xen/include/public/sysctl.h
index 91c48dcae0..1b2b165a6d 100644
--- a/xen/include/public/sysctl.h
+++ b/xen/include/public/sysctl.h
@@ -35,7 +35,7 @@
 #include "domctl.h"
 #include "physdev.h"
 
-#define XEN_SYSCTL_INTERFACE_VERSION 0x00000012
+#define XEN_SYSCTL_INTERFACE_VERSION 0x00000013
 
 /*
  * Read console content from Xen buffer ring.
@@ -956,6 +956,15 @@ struct xen_sysctl_livepatch_action {
                                             /* hypervisor default. */
                                             /* Or upper bound of time (ns) */
                                             /* for operation to take. */
+
+/*
+ * Overwrite default inter-module buildid dependency chain enforcement.
+ * Check only if module is built for given hypervisor by comparing buildid.
+ */
+#define LIVEPATCH_ACTION_APPLY_NODEPS (1 << 0)
+    uint64_t flags;                         /* IN: action flags. */
+                                            /* Provide additional parameters */
+                                            /* for an action. */
 };
 
 struct xen_sysctl_livepatch_op {
-- 
2.16.5




Amazon Development Center Germany GmbH
Krausenstr. 38
10117 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Ralf Herbrich
Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
Sitz: Berlin
Ust-ID: DE 289 237 879




_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  reply	other threads:[~2019-08-20 13:29 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-16 12:58 [livepatch: independ. modules 1/3] livepatch: Always check hypervisor build ID upon hotpatch upload Pawel Wieczorkiewicz
2019-04-16 12:58 ` [livepatch: independ. modules 2/3] livepatch: Allow to override inter-modules buildid dependency Pawel Wieczorkiewicz
2019-08-20 13:28   ` Pawel Wieczorkiewicz [this message]
2019-08-20 13:35     ` [Xen-devel] [livepatch: independ. modules v2 " Julien Grall
2019-08-20 14:09       ` Wieczorkiewicz, Pawel
2019-08-20 14:28         ` Julien Grall
2019-08-20 14:52           ` Wieczorkiewicz, Pawel
2019-08-20 15:11             ` Julien Grall
2019-04-16 12:58 ` [livepatch: independ. modules 3/3] python: Add XC binding for Xen build ID Pawel Wieczorkiewicz
2019-08-15  9:44   ` [Xen-devel] " Pawel Wieczorkiewicz
2019-08-16 12:47     ` Wei Liu
2019-08-16 12:52       ` Wieczorkiewicz, Pawel
2019-08-19 20:40     ` Marek Marczykowski-Górecki
2019-08-20 11:04       ` Wieczorkiewicz, Pawel
2019-08-20 12:51     ` [Xen-devel] [livepatch: independ. modules v3 " Pawel Wieczorkiewicz
2019-08-20 13:00       ` Marek Marczykowski-Górecki
2019-04-23 15:47 ` [livepatch: independ. modules 1/3] livepatch: Always check hypervisor build ID upon hotpatch upload Konrad Rzeszutek Wilk
2019-04-29  9:46 ` [livepatch: independ. modules v2 " Pawel Wieczorkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190820132854.110843-1-wipawel@amazon.de \
    --to=wipawel@amazon.de \
    --cc=George.Dunlap@eu.citrix.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=jbeulich@suse.com \
    --cc=julien.grall@arm.com \
    --cc=konrad.wilk@oracle.com \
    --cc=mpohlack@amazon.de \
    --cc=ross.lagerwall@citrix.com \
    --cc=sstabellini@kernel.org \
    --cc=tim@xen.org \
    --cc=wl@xen.org \
    --cc=xen-devel@lists.xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).