Xen-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xenproject.org>
Cc: "Andrew Cooper" <andrew.cooper3@citrix.com>,
	"Ian Jackson" <Ian.Jackson@citrix.com>, "Wei Liu" <wl@xen.org>,
	"Jan Beulich" <JBeulich@suse.com>,
	"Roger Pau Monné" <roger.pau@citrix.com>
Subject: [Xen-devel] [PATCH v2 06/10] tools/libxc: Pre-cleanup for xc_cpuid_{set, apply_policy}()
Date: Fri, 13 Sep 2019 20:27:55 +0100
Message-ID: <20190913192759.10795-7-andrew.cooper3@citrix.com> (raw)
In-Reply-To: <20190913192759.10795-1-andrew.cooper3@citrix.com>

This patch is broken out just to simplify the following two.

For xc_cpuid_set(), document how the 's' and 'k' options works because it is
quite subtle.  Replace a memset() with a for loop of 4 explicit NULL
assigments.  This mirrors the free()'s in the fail path.

For xc_cpuid_apply_policy(), const-ify the featureset pointer.  It isn't
written to, and was never intended to be mutable.

Drop three pieces of trailing whitespace.

No functional change.

Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
CC: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wl@xen.org>
CC: Roger Pau Monné <roger.pau@citrix.com>
CC: Ian Jackson <Ian.Jackson@citrix.com>

v2:
 * Adjust the comments to include 's' along with 'k'
---
 tools/libxc/include/xenctrl.h |  2 +-
 tools/libxc/xc_cpuid_x86.c    | 21 ++++++++++++++-------
 2 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/tools/libxc/include/xenctrl.h b/tools/libxc/include/xenctrl.h
index 0da437318e..f4431687b3 100644
--- a/tools/libxc/include/xenctrl.h
+++ b/tools/libxc/include/xenctrl.h
@@ -1800,7 +1800,7 @@ int xc_cpuid_set(xc_interface *xch,
                  char **config_transformed);
 int xc_cpuid_apply_policy(xc_interface *xch,
                           uint32_t domid,
-                          uint32_t *featureset,
+                          const uint32_t *featureset,
                           unsigned int nr_features);
 int xc_mca_op(xc_interface *xch, struct xen_mc *mc);
 int xc_mca_op_inject_v2(xc_interface *xch, unsigned int flags,
diff --git a/tools/libxc/xc_cpuid_x86.c b/tools/libxc/xc_cpuid_x86.c
index 0f07317b54..8785cae329 100644
--- a/tools/libxc/xc_cpuid_x86.c
+++ b/tools/libxc/xc_cpuid_x86.c
@@ -1,5 +1,5 @@
 /******************************************************************************
- * xc_cpuid_x86.c 
+ * xc_cpuid_x86.c
  *
  * Compute cpuid of a domain.
  *
@@ -329,7 +329,7 @@ static void cpuid(const unsigned int *input, unsigned int *regs)
 
 static int get_cpuid_domain_info(xc_interface *xch, uint32_t domid,
                                  struct cpuid_domain_info *info,
-                                 uint32_t *featureset,
+                                 const uint32_t *featureset,
                                  unsigned int nr_features)
 {
     struct xen_domctl domctl = {};
@@ -804,8 +804,7 @@ static void sanitise_featureset(struct cpuid_domain_info *info)
 }
 
 int xc_cpuid_apply_policy(xc_interface *xch, uint32_t domid,
-                          uint32_t *featureset,
-                          unsigned int nr_features)
+                          const uint32_t *featureset, unsigned int nr_features)
 {
     struct cpuid_domain_info info = {};
     unsigned int input[2] = { 0, 0 }, regs[4];
@@ -895,7 +894,7 @@ int xc_cpuid_apply_policy(xc_interface *xch, uint32_t domid,
  *   'k' -> pass through host value
  *   's' -> pass through the first time and then keep the same value
  *          across save/restore and migration.
- * 
+ *
  * For 's' and 'x' the configuration is overwritten with the value applied.
  */
 int xc_cpuid_set(
@@ -906,7 +905,8 @@ int xc_cpuid_set(
     unsigned int i, j, regs[4], polregs[4];
     struct cpuid_domain_info info = {};
 
-    memset(config_transformed, 0, 4 * sizeof(*config_transformed));
+    for ( i = 0; i < 4; ++i )
+        config_transformed[i] = NULL;
 
     rc = get_cpuid_domain_info(xch, domid, &info, NULL, 0);
     if ( rc )
@@ -924,7 +924,7 @@ int xc_cpuid_set(
             regs[i] = polregs[i];
             continue;
         }
-        
+
         config_transformed[i] = calloc(33, 1); /* 32 bits, NUL terminator. */
         if ( config_transformed[i] == NULL )
         {
@@ -932,6 +932,13 @@ int xc_cpuid_set(
             goto fail;
         }
 
+        /*
+         * Notes for following this algorithm:
+         *
+         * While it will accept any leaf data, it only makes sense to use on
+         * feature leaves.  regs[] initially contains the host values.  This,
+         * with the fall-through chain is how the 's' and 'k' options works.
+         */
         for ( j = 0; j < 32; j++ )
         {
             unsigned char val = !!((regs[i] & (1U << (31 - j))));
-- 
2.11.0


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13 19:27 [Xen-devel] [PATCH v2 00/10] x86/cpuid: Switch to using XEN_DOMCTL_set_cpumsr_policy Andrew Cooper
2019-09-13 19:27 ` [Xen-devel] [PATCH v2 01/10] x86/msr: Offer CPUID Faulting to PVH control domains Andrew Cooper
2019-09-16 10:53   ` Jan Beulich
2019-09-13 19:27 ` [Xen-devel] [PATCH v2 02/10] libx86: Proactively initialise error pointers Andrew Cooper
     [not found]   ` <527f33ad-3de1-15c7-eb4b-603eaf65f3c5@suse.com>
     [not found]     ` <65f18521-15c5-72a9-29f6-cd5d621e1283@citrix.com>
2019-09-16 15:46       ` Jan Beulich
2019-09-13 19:27 ` [Xen-devel] [PATCH v2 03/10] libx86: Introduce x86_cpu_policies_are_compatible() Andrew Cooper
2019-09-16 10:59   ` Jan Beulich
2019-09-16 15:31     ` Andrew Cooper
2019-09-13 19:27 ` [Xen-devel] [PATCH v2 04/10] x86/cpuid: Split update_domain_cpuid_info() in half Andrew Cooper
2019-09-13 19:27 ` [Xen-devel] [PATCH v2 05/10] x86/domctl: Implement XEN_DOMCTL_set_cpumsr_policy Andrew Cooper
2019-09-16 11:04   ` Jan Beulich
2019-09-16 15:40     ` Andrew Cooper
2019-09-13 19:27 ` Andrew Cooper [this message]
2019-09-16 11:09   ` [Xen-devel] [PATCH v2 06/10] tools/libxc: Pre-cleanup for xc_cpuid_{set, apply_policy}() Jan Beulich
2019-09-16 15:42     ` Andrew Cooper
2019-09-13 19:27 ` [Xen-devel] [PATCH v2 07/10] tools/libxc: Rework xc_cpuid_set() to use {get, set}_cpu_policy() Andrew Cooper
2019-09-13 19:27 ` [Xen-devel] [PATCH v2 08/10] tools/libxc: Rework xc_cpuid_apply_policy() " Andrew Cooper
2019-09-16 11:17   ` Jan Beulich
2019-09-16 13:41     ` Wei Liu
2019-09-16 15:49     ` Andrew Cooper
2019-09-16 16:05       ` Jan Beulich
2019-09-18 16:09   ` Jan Beulich
2019-09-13 19:27 ` [Xen-devel] [PATCH v2 09/10] x86/domctl: Drop XEN_DOMCTL_set_cpuid Andrew Cooper
2019-09-13 19:27 ` [Xen-devel] [PATCH v2 10/10] x86/cpuid: Enable CPUID Faulting for PV control domains by default Andrew Cooper
2019-09-16 11:22   ` Jan Beulich
2019-09-16 15:52     ` Andrew Cooper

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190913192759.10795-7-andrew.cooper3@citrix.com \
    --to=andrew.cooper3@citrix.com \
    --cc=Ian.Jackson@citrix.com \
    --cc=JBeulich@suse.com \
    --cc=roger.pau@citrix.com \
    --cc=wl@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Xen-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/xen-devel/0 xen-devel/git/0.git
	git clone --mirror https://lore.kernel.org/xen-devel/1 xen-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 xen-devel xen-devel/ https://lore.kernel.org/xen-devel \
		xen-devel@lists.xenproject.org xen-devel@archiver.kernel.org
	public-inbox-index xen-devel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.xenproject.lists.xen-devel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox