[Xen-devel] [XEN PATCH v2 09/12] xen/build: include include/config/auto.conf in main Makefile

[Anthony PERARD <anthony.perard@citrix.com>]

We are going to generate the CFLAGS early from "xen/Makefile" instead
of in "Rules.mk", but we need to include "config/auto.conf", so
include it in "Makefile".

Before including "config/auto.conf" we check which make target a user
is calling, as some targets don't need "auto.conf". For targets that
needs auto.conf, make will generate it (and a default .config if
missing).

root-make-done is to avoid doing the calculation again once Rules.mk
takes over and is been executed with the root Makefile. When Rules.mk
is including xen/Makefile, `config-build' and `need-config' are
undefined so auto.conf will not be included again (it is already
included by Rules.mk) and kconfig target are out of reach of Rules.mk.

The way targets are filtered is inspireds by Kbuild, with some code
imported from Linux. That's why there is PHONY variable that isn't
used yet, for example.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
---
 xen/Makefile | 96 +++++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 73 insertions(+), 23 deletions(-)

diff --git a/xen/Makefile b/xen/Makefile
index 5d72d82be260..80679b4a6b17 100644
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -49,7 +49,71 @@ default: build
 .PHONY: dist
 dist: install
 
-build install:: include/config/auto.conf
+
+ifndef root-make-done
+# section to run before calling Rules.mk, but only once.
+#
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to tools/kconfig/Makefile
+
+clean-targets := %clean
+no-dot-config-targets := $(clean-targets) \
+			 uninstall debug cloc \
+			 cscope TAGS tags MAP gtags \
+			 xenversion
+
+config-build	:=
+need-config	:= 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+		need-config :=
+	endif
+endif
+
+ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+	config-build := 1
+endif
+
+export root-make-done := 1
+endif # root-make-done
+
+ifdef config-build
+# ===========================================================================
+# *config targets only - make sure prerequisites are updated, and descend
+# in tools/kconfig to make the *config target
+
+config: FORCE
+	$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)" $@
+
+# Config.mk tries to include .config file, don't try to remake it
+%/.config: ;
+
+%config: FORCE
+	$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)" $@
+
+else # !config-build
+
+ifdef need-config
+include include/config/auto.conf
+# Read in dependencies to all Kconfig* files, make sure to run syncconfig if
+# changes are detected.
+include include/config/auto.conf.cmd
+
+# Allow people to just run `make` as before and not force them to configure
+$(KCONFIG_CONFIG):
+	$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)" defconfig
+
+# The actual configuration files used during the build are stored in
+# include/generated/ and include/config/. Update them if .config is newer than
+# include/config/auto.conf (which mirrors .config).
+#
+# This exploits the 'multi-target pattern rule' trick.
+# The syncconfig should be executed only once to make all the targets.
+%/auto.conf %/auto.conf.cmd: $(KCONFIG_CONFIG)
+	$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)" syncconfig
+
+endif # need-config
 
 .PHONY: build install uninstall clean distclean MAP
 build install uninstall debug clean distclean MAP::
@@ -251,9 +315,6 @@ cscope:
 _MAP:
 	$(NM) -n $(TARGET)-syms | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' > System.map
 
-.PHONY: FORCE
-FORCE:
-
 %.o %.i %.s: %.c FORCE
 	$(MAKE) -f $(BASEDIR)/Rules.mk -C $(*D) $(@F)
 
@@ -274,25 +335,6 @@ $(foreach base,arch/x86/mm/guest_walk_% \
                arch/x86/mm/shadow/guest_%, \
     $(foreach ext,o i s,$(call build-intermediate,$(base).$(ext))))
 
-kconfig := oldconfig config menuconfig defconfig \
-	nconfig xconfig gconfig savedefconfig listnewconfig olddefconfig \
-	randconfig $(notdir $(wildcard arch/$(SRCARCH)/configs/*_defconfig))
-.PHONY: $(kconfig)
-$(kconfig):
-	$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)" $@
-
-include/config/%.conf: include/config/auto.conf.cmd $(KCONFIG_CONFIG)
-	$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)" syncconfig
-
-# Allow people to just run `make` as before and not force them to configure
-$(KCONFIG_CONFIG):
-	$(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)" defconfig
-
-# Break the dependency chain for the first run
-include/config/auto.conf.cmd: ;
-
--include $(BASEDIR)/include/config/auto.conf.cmd
-
 .PHONY: cloc
 cloc:
 	$(eval tmpfile := $(shell mktemp))
@@ -304,3 +346,11 @@ cloc:
 	cloc --list-file=$(tmpfile)
 	rm $(tmpfile)
 
+endif #config-build
+
+PHONY += FORCE
+FORCE:
+
+# Declare the contents of the PHONY variable as phony.  We keep that
+# information in a variable so we can use it in if_changed and friends.
+.PHONY: $(PHONY)
-- 
Anthony PERARD


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel