[PATCH v3 1/4] xen/arm: Move dom0 creation in domain_build.c

[Luca Fancellu <luca.fancellu@arm.com>]

Move dom0 creation and start from setup.c to domain_build.c
on a dedicate function.

Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
---
v3 changes:
- move create_dom0 function after construct_dom0 and
  make construct_dom0 static
---
 xen/arch/arm/domain_build.c | 38 ++++++++++++++++++++++++++++++++++++-
 xen/arch/arm/setup.c        | 29 +---------------------------
 xen/include/asm-arm/setup.h |  2 +-
 3 files changed, 39 insertions(+), 30 deletions(-)

diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 374bf655ee..359957dc1b 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -21,6 +21,7 @@
 #include <asm/device.h>
 #include <asm/kernel.h>
 #include <asm/setup.h>
+#include <asm/tee/tee.h>
 #include <asm/platform.h>
 #include <asm/psci.h>
 #include <asm/setup.h>
@@ -2520,7 +2521,7 @@ void __init create_domUs(void)
     }
 }
 
-int __init construct_dom0(struct domain *d)
+static int __init construct_dom0(struct domain *d)
 {
     struct kernel_info kinfo = {};
     int rc;
@@ -2578,6 +2579,41 @@ int __init construct_dom0(struct domain *d)
     return construct_domain(d, &kinfo);
 }
 
+struct domain* __init create_dom0(void)
+{
+    struct domain *dom0;
+    struct xen_domctl_createdomain dom0_cfg = {
+        .flags = XEN_DOMCTL_CDF_hvm | XEN_DOMCTL_CDF_hap,
+        .max_evtchn_port = -1,
+        .max_grant_frames = gnttab_dom0_frames(),
+        .max_maptrack_frames = -1,
+    };
+
+    /* The vGIC for DOM0 is exactly emulating the hardware GIC */
+    dom0_cfg.arch.gic_version = XEN_DOMCTL_CONFIG_GIC_NATIVE;
+    /*
+     * Xen vGIC supports a maximum of 992 interrupt lines.
+     * 32 are substracted to cover local IRQs.
+     */
+    dom0_cfg.arch.nr_spis = min(gic_number_lines(), (unsigned int) 992) - 32;
+    if ( gic_number_lines() > 992 )
+        printk(XENLOG_WARNING "Maximum number of vGIC IRQs exceeded.\n");
+    dom0_cfg.arch.tee_type = tee_get_type();
+    dom0_cfg.max_vcpus = dom0_max_vcpus();
+
+    if ( iommu_enabled )
+        dom0_cfg.flags |= XEN_DOMCTL_CDF_iommu;
+
+    dom0 = domain_create(0, &dom0_cfg, true);
+    if ( IS_ERR(dom0) || (alloc_dom0_vcpu0(dom0) == NULL) )
+        panic("Error creating domain 0\n");
+
+    if ( construct_dom0(dom0) != 0)
+        panic("Could not set up DOM0 guest OS\n");
+
+    return dom0;
+}
+
 /*
  * Local variables:
  * mode: C
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 2532ec9739..b405f58996 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -51,7 +51,6 @@
 #include <asm/platform.h>
 #include <asm/procinfo.h>
 #include <asm/setup.h>
-#include <asm/tee/tee.h>
 #include <xsm/xsm.h>
 #include <asm/acpi.h>
 
@@ -805,12 +804,6 @@ void __init start_xen(unsigned long boot_phys_offset,
     const char *cmdline;
     struct bootmodule *xen_bootmodule;
     struct domain *dom0;
-    struct xen_domctl_createdomain dom0_cfg = {
-        .flags = XEN_DOMCTL_CDF_hvm | XEN_DOMCTL_CDF_hap,
-        .max_evtchn_port = -1,
-        .max_grant_frames = gnttab_dom0_frames(),
-        .max_maptrack_frames = -1,
-    };
     int rc;
 
     dcache_line_bytes = read_dcache_line_bytes();
@@ -965,27 +958,7 @@ void __init start_xen(unsigned long boot_phys_offset,
     enable_errata_workarounds();
 
     /* Create initial domain 0. */
-    /* The vGIC for DOM0 is exactly emulating the hardware GIC */
-    dom0_cfg.arch.gic_version = XEN_DOMCTL_CONFIG_GIC_NATIVE;
-    /*
-     * Xen vGIC supports a maximum of 992 interrupt lines.
-     * 32 are substracted to cover local IRQs.
-     */
-    dom0_cfg.arch.nr_spis = min(gic_number_lines(), (unsigned int) 992) - 32;
-    if ( gic_number_lines() > 992 )
-        printk(XENLOG_WARNING "Maximum number of vGIC IRQs exceeded.\n");
-    dom0_cfg.arch.tee_type = tee_get_type();
-    dom0_cfg.max_vcpus = dom0_max_vcpus();
-
-    if ( iommu_enabled )
-        dom0_cfg.flags |= XEN_DOMCTL_CDF_iommu;
-
-    dom0 = domain_create(0, &dom0_cfg, true);
-    if ( IS_ERR(dom0) || (alloc_dom0_vcpu0(dom0) == NULL) )
-        panic("Error creating domain 0\n");
-
-    if ( construct_dom0(dom0) != 0)
-        panic("Could not set up DOM0 guest OS\n");
+    dom0 = create_dom0();
 
     heap_init_late();
 
diff --git a/xen/include/asm-arm/setup.h b/xen/include/asm-arm/setup.h
index 28bf622aa1..5283244015 100644
--- a/xen/include/asm-arm/setup.h
+++ b/xen/include/asm-arm/setup.h
@@ -93,8 +93,8 @@ void acpi_create_efi_mmap_table(struct domain *d,
 
 int acpi_make_efi_nodes(void *fdt, struct membank tbl_add[]);
 
-int construct_dom0(struct domain *d);
 void create_domUs(void);
+struct domain* create_dom0(void);
 
 void discard_initial_modules(void);
 void fw_unreserved_regions(paddr_t s, paddr_t e,
-- 
2.17.1