xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Michal Orzel <michal.orzel@arm.com>
To: xen-devel@lists.xenproject.org
Cc: Stefano Stabellini <sstabellini@kernel.org>,
	Julien Grall <julien@xen.org>,
	Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>,
	bertrand.marquis@arm.com
Subject: [PATCH 0/9] xen/arm64: Get rid of READ/WRITE_SYSREG32
Date: Tue, 20 Apr 2021 09:08:44 +0200	[thread overview]
Message-ID: <20210420070853.8918-1-michal.orzel@arm.com> (raw)

The purpose of this patch series is to remove 32bit helper
macros READ/WRITE_SYSREG32 on arm64 as the idea of them is
not following the latest ARMv8 specification and mrs/msr instructions
are expecting 64bit values.
According to ARM DDI 0487G.a all the AArch64 system registers
are 64bit wide even though many of them have upper 32bit reserved.
This does not mean that in the newer versions of ARMv8 or in the next
architecture, some of the sysregs will get widen.
Also when dealing with system registers we should use register_t
type.

This patch series removes the use of READ/WRITE_SYSREG32
and replaces these calls with READ/WRITE_SYSREG. The change was
splited into several small patches to make the review proces easier.

This patch series focuses on removing READ/WRITE_SYSREG32.
There are still some AArch64 system registers defined as 32bit like cpsr
that should be changed later on. They were not changed as they did not appear
inside READ/WRITE_SYSREG32. The next thing to do is to also get rid of
vreg_emulate_sysreg32.

Michal Orzel (9):
  arm64/vfp: Get rid of READ/WRITE_SYSREG32
  arm/domain: Get rid of READ/WRITE_SYSREG32
  arm/gic: Get rid of READ/WRITE_SYSREG32
  arm/p2m: Get rid of READ/WRITE_SYSREG32
  arm/mm: Get rid of READ/WRITE_SYSREG32
  arm/page: Get rid of READ/WRITE_SYSREG32
  arm/time,vtimer: Get rid of READ/WRITE_SYSREG32
  arm: Change type of hsr to register_t
  xen/arm64: Remove READ/WRITE_SYSREG32 helper macros

 xen/arch/arm/arm64/entry.S            |  2 +-
 xen/arch/arm/arm64/traps.c            |  2 +-
 xen/arch/arm/arm64/vfp.c              | 12 ++--
 xen/arch/arm/arm64/vsysreg.c          |  3 +-
 xen/arch/arm/domain.c                 | 20 +++---
 xen/arch/arm/gic-v3-lpi.c             |  2 +-
 xen/arch/arm/gic-v3.c                 | 96 ++++++++++++++-------------
 xen/arch/arm/mm.c                     |  2 +-
 xen/arch/arm/p2m.c                    |  8 +--
 xen/arch/arm/time.c                   | 28 ++++----
 xen/arch/arm/traps.c                  | 24 ++++---
 xen/arch/arm/vcpreg.c                 | 29 ++++++--
 xen/arch/arm/vtimer.c                 | 10 +--
 xen/include/asm-arm/arm32/processor.h |  2 +-
 xen/include/asm-arm/arm64/processor.h |  5 +-
 xen/include/asm-arm/arm64/sysregs.h   |  5 --
 xen/include/asm-arm/arm64/vfp.h       |  6 +-
 xen/include/asm-arm/domain.h          |  6 +-
 xen/include/asm-arm/gic.h             |  6 +-
 xen/include/asm-arm/hsr.h             | 34 +++++++++-
 xen/include/asm-arm/page.h            |  4 +-
 21 files changed, 179 insertions(+), 127 deletions(-)

-- 
2.29.0



             reply	other threads:[~2021-04-20  7:09 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-20  7:08 Michal Orzel [this message]
2021-04-20  7:08 ` [PATCH 1/9] arm64/vfp: Get rid of READ/WRITE_SYSREG32 Michal Orzel
2021-04-20 13:04   ` Julien Grall
2021-04-20  7:08 ` [PATCH 2/9] arm/domain: " Michal Orzel
2021-04-20 13:12   ` Julien Grall
2021-04-21  7:36     ` Michal Orzel
2021-04-21 10:20       ` Julien Grall
2021-04-20  7:08 ` [PATCH 3/9] arm/gic: " Michal Orzel
2021-04-20 13:28   ` Julien Grall
2021-04-21  7:48     ` Michal Orzel
2021-04-21 10:21       ` Julien Grall
2021-04-20  7:08 ` [PATCH 4/9] arm/p2m: " Michal Orzel
2021-04-20 13:31   ` Julien Grall
2021-04-20  7:08 ` [PATCH 5/9] arm/mm: " Michal Orzel
2021-04-20 13:37   ` Julien Grall
2021-04-22 11:47     ` Michal Orzel
2021-04-22 13:40       ` Julien Grall
2021-04-20  7:08 ` [PATCH 6/9] arm/page: " Michal Orzel
2021-04-21 15:11   ` Julien Grall
2021-04-20  7:08 ` [PATCH 7/9] arm/time,vtimer: " Michal Orzel
2021-04-21 16:01   ` Julien Grall
2021-04-20  7:08 ` [PATCH 8/9] arm: Change type of hsr to register_t Michal Orzel
2021-04-21 19:02   ` Julien Grall
2021-04-20  7:08 ` [PATCH 9/9] xen/arm64: Remove READ/WRITE_SYSREG32 helper macros Michal Orzel
2021-04-21 19:16   ` Julien Grall
2021-04-27  7:16     ` Michal Orzel
2021-04-27  8:30       ` Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210420070853.8918-1-michal.orzel@arm.com \
    --to=michal.orzel@arm.com \
    --cc=Volodymyr_Babchuk@epam.com \
    --cc=bertrand.marquis@arm.com \
    --cc=julien@xen.org \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).