xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Bernhard Beschow <shentey@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>,
	"Richard Henderson" <richard.henderson@linaro.org>,
	"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
	"David Woodhouse" <dwmw@amazon.co.uk>,
	"Eduardo Habkost" <eduardo@habkost.net>,
	"Stefano Stabellini" <sstabellini@kernel.org>,
	"Chuck Zmudzinski" <brchuckz@aol.com>,
	"Aurelien Jarno" <aurelien@aurel32.net>,
	"Hervé Poussineau" <hpoussin@reactos.org>,
	"Paul Durrant" <paul@xen.org>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Anthony Perard" <anthony.perard@citrix.com>,
	xen-devel@lists.xenproject.org,
	"Bernhard Beschow" <shentey@gmail.com>
Subject: [PATCH v4 1/7] include/hw/xen/xen: Rename xen_piix3_set_irq() to xen_intx_set_irq()
Date: Mon,  3 Apr 2023 09:41:18 +0200	[thread overview]
Message-ID: <20230403074124.3925-2-shentey@gmail.com> (raw)
In-Reply-To: <20230403074124.3925-1-shentey@gmail.com>

xen_piix3_set_irq() isn't PIIX specific: PIIX is a single PCI device
while xen_piix3_set_irq() maps multiple PCI devices to their respective
IRQs, which is board-specific. Rename xen_piix3_set_irq() to communicate
this.

Also rename XEN_PIIX_NUM_PIRQS to XEN_IOAPIC_NUM_PIRQS since the Xen's
IOAPIC rather than PIIX has this many interrupt routes.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-2-shentey@gmail.com>
---
 include/hw/xen/xen.h  | 2 +-
 hw/i386/xen/xen-hvm.c | 2 +-
 hw/isa/piix3.c        | 4 ++--
 stubs/xen-hw-stub.c   | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/hw/xen/xen.h b/include/hw/xen/xen.h
index 2bd8ec742d..37ecc91fc3 100644
--- a/include/hw/xen/xen.h
+++ b/include/hw/xen/xen.h
@@ -39,7 +39,7 @@ extern bool xen_domid_restrict;
 
 int xen_pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num);
 int xen_set_pci_link_route(uint8_t link, uint8_t irq);
-void xen_piix3_set_irq(void *opaque, int irq_num, int level);
+void xen_intx_set_irq(void *opaque, int irq_num, int level);
 void xen_hvm_inject_msi(uint64_t addr, uint32_t data);
 int xen_is_pirq_msi(uint32_t msi_data);
 
diff --git a/hw/i386/xen/xen-hvm.c b/hw/i386/xen/xen-hvm.c
index 56641a550e..ab8f1b61ee 100644
--- a/hw/i386/xen/xen-hvm.c
+++ b/hw/i386/xen/xen-hvm.c
@@ -143,7 +143,7 @@ int xen_pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
     return irq_num + (PCI_SLOT(pci_dev->devfn) << 2);
 }
 
-void xen_piix3_set_irq(void *opaque, int irq_num, int level)
+void xen_intx_set_irq(void *opaque, int irq_num, int level)
 {
     xen_set_pci_intx_level(xen_domid, 0, 0, irq_num >> 2,
                            irq_num & 3, level);
diff --git a/hw/isa/piix3.c b/hw/isa/piix3.c
index a9cb39bf21..1b3e23f0d7 100644
--- a/hw/isa/piix3.c
+++ b/hw/isa/piix3.c
@@ -34,7 +34,7 @@
 #include "migration/vmstate.h"
 #include "hw/acpi/acpi_aml_interface.h"
 
-#define XEN_PIIX_NUM_PIRQS      128ULL
+#define XEN_IOAPIC_NUM_PIRQS    128ULL
 
 static void piix3_set_irq_pic(PIIX3State *piix3, int pic_irq)
 {
@@ -405,7 +405,7 @@ static void piix3_xen_realize(PCIDevice *dev, Error **errp)
      * connected to the IOAPIC directly.
      * These additional routes can be discovered through ACPI.
      */
-    pci_bus_irqs(pci_bus, xen_piix3_set_irq, piix3, XEN_PIIX_NUM_PIRQS);
+    pci_bus_irqs(pci_bus, xen_intx_set_irq, piix3, XEN_IOAPIC_NUM_PIRQS);
 }
 
 static void piix3_xen_class_init(ObjectClass *klass, void *data)
diff --git a/stubs/xen-hw-stub.c b/stubs/xen-hw-stub.c
index 34a22f2ad7..7d7ffe83a9 100644
--- a/stubs/xen-hw-stub.c
+++ b/stubs/xen-hw-stub.c
@@ -15,7 +15,7 @@ int xen_pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
     return -1;
 }
 
-void xen_piix3_set_irq(void *opaque, int irq_num, int level)
+void xen_intx_set_irq(void *opaque, int irq_num, int level)
 {
 }
 
-- 
2.40.0



  reply	other threads:[~2023-04-03  7:42 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-03  7:41 [PATCH v4 0/7] Resolve TYPE_PIIX3_XEN_DEVICE Bernhard Beschow
2023-04-03  7:41 ` Bernhard Beschow [this message]
2023-04-03  7:41 ` [PATCH v4 2/7] hw/pci/pci.c: Don't leak PCIBus::irq_count[] in pci_bus_irqs() Bernhard Beschow
2023-04-19 19:31   ` Bernhard Beschow
2023-04-21  7:37   ` Michael S. Tsirkin
2023-04-03  7:41 ` [PATCH v4 3/7] hw/isa/piix3: Reuse piix3_realize() in piix3_xen_realize() Bernhard Beschow
2023-04-03  7:41 ` [PATCH v4 4/7] hw/isa/piix3: Wire up Xen PCI IRQ handling outside of PIIX3 Bernhard Beschow
2023-04-03  7:41 ` [PATCH v4 5/7] hw/isa/piix3: Avoid Xen-specific variant of piix3_write_config() Bernhard Beschow
2023-04-03  7:41 ` [PATCH v4 6/7] hw/isa/piix3: Resolve redundant k->config_write assignments Bernhard Beschow
2023-04-03  7:41 ` [PATCH v4 7/7] hw/isa/piix3: Resolve redundant TYPE_PIIX3_XEN_DEVICE Bernhard Beschow
2023-04-21  7:38 ` [PATCH v4 0/7] Resolve TYPE_PIIX3_XEN_DEVICE Michael S. Tsirkin
2023-04-21 16:35   ` Bernhard Beschow
2023-05-13 11:44   ` Bernhard Beschow
2023-05-15 20:52     ` Stefano Stabellini
2023-05-22 15:42       ` Bernhard Beschow
2023-06-05  7:01         ` Bernhard Beschow
2023-06-08 22:43           ` Stefano Stabellini
2023-06-09  0:23             ` Stefano Stabellini
2023-06-09 10:46             ` Anthony PERARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230403074124.3925-2-shentey@gmail.com \
    --to=shentey@gmail.com \
    --cc=anthony.perard@citrix.com \
    --cc=aurelien@aurel32.net \
    --cc=brchuckz@aol.com \
    --cc=dwmw@amazon.co.uk \
    --cc=eduardo@habkost.net \
    --cc=hpoussin@reactos.org \
    --cc=marcel.apfelbaum@gmail.com \
    --cc=mst@redhat.com \
    --cc=paul@xen.org \
    --cc=pbonzini@redhat.com \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).