[Xen-devel] [XEN PATCH v4 for-4.13 10/10] libxl/xl: Overhaul passthrough setting logic passthrough setting logic

[Ian Jackson <ian.jackson@citrix.com>]

Here's what I hope is the final version...

From b60195e857d3699eaa55d9174a69bf91902cddb5 Mon Sep 17 00:00:00 2001
From: Ian Jackson <ian.jackson@eu.citrix.com>
Date: Mon, 7 Oct 2019 17:59:15 +0100
Subject: [XEN PATCH v4 for-4.13 10/10] libxl/xl: Overhaul passthrough setting
 logic

LIBXL_PASSTHROUGH_UNKNOWN (aka "ENABLED" in an earlier uncommitted
version of this code) is doing double duty.  We actually need all of
the following to be specificable:
  * default ("unknown"): enable PT iff we have devices to
    pass through specified in the initial config file.
  * "enabled" (and fail if the platform doesn't support it).
  * "disabled" (and reject future PT hotplug).
  * "share_pt"/"sync_pt": enable PT and set a specific PT mode.

Defaulting and error checking should be done in libxl.  So, we make
several changes here.

We introduce "enabled".  (And we document "unknown".)

We move all of the error checking and defaulting code from xl into
libxl.  Now, libxl__domain_config_setdefault has all of the necessary
information to get this right.  So we can do it all there.  Choosing
the specific mode is arch-specific.

We can also arrange to have only one place each which calculates
(i) whether passthrough needs to be enabled because pt devices were
specified (ii) whether pt_share can be used (for each arch).

xl now only has to parse the enum in the same way as it parses all
other enums.

This change fixes a regression from earlier 4.13-pre: until recent
changes, passthrough was only enabled by default if passthrough
devices were specified.  We restore this behaviour.

Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Julien Grall <julien@xen.org>
CC: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
CC: Andrew Cooper <Andrew.Cooper3@citrix.com>
CC: Paul Durrant <pdurrant@gmail.com>
CC: Jan Beulich <jbeulich@suse.com>

---
v4: Fix trailing whitespace
    No longer change "unknown" to "unspecified".

v3: Drop paragraph about masking another osstest regression,
     as that's now fixed.
    Drop redundant "ERROR:" in two log messages.
    Add a comment about the way "enabled" gets changed to a specific value.
    Split passthrough mode defaulting into arch specific functions.
    On ARM, always choose (and insist on) share_pt.
    Reject share_pt for non-HAP guests.
    Reject passthrough for PVH guests.
    Actually document "unspecified" option in xl.cfg(5)
    Rename "unknown" to "unspecified"

v2: New patch in this version of the series.
---
 docs/man/xl.cfg.5.pod.in    |  6 ++++
 tools/libxl/libxl_arch.h    |  6 ++++
 tools/libxl/libxl_arm.c     | 24 ++++++++++++++++
 tools/libxl/libxl_create.c  | 41 +++++++++++++++++++--------
 tools/libxl/libxl_types.idl |  5 ++--
 tools/libxl/libxl_x86.c     | 41 +++++++++++++++++++++++++++
 tools/xl/xl_parse.c         | 67 ++++-----------------------------------------
 7 files changed, 114 insertions(+), 76 deletions(-)

diff --git a/docs/man/xl.cfg.5.pod.in b/docs/man/xl.cfg.5.pod.in
index 64bed30bce..7e220d0c20 100644
--- a/docs/man/xl.cfg.5.pod.in
+++ b/docs/man/xl.cfg.5.pod.in
@@ -660,6 +660,12 @@ in preference. However, the availability of this option is hardware
 specific. If B<xl info> reports B<virt_caps> containing
 B<iommu_hap_pt_share> then this option may be used.
 
+=item B<unspecified>
+
+The default, which chooses between B<disabled> and B<enabled>
+according to whether passthrough devices are enabled in the config
+file.
+
 =back
 
 =back
diff --git a/tools/libxl/libxl_arch.h b/tools/libxl/libxl_arch.h
index d624159e53..ee6641b3e6 100644
--- a/tools/libxl/libxl_arch.h
+++ b/tools/libxl/libxl_arch.h
@@ -73,6 +73,12 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc *gc,
                                               libxl_domain_build_info *b_info);
 
 _hidden
+int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc,
+                                            uint32_t domid,
+                                            libxl_domain_config *d_config,
+                                            const libxl_physinfo *physinfo);
+
+_hidden
 int libxl__arch_extra_memory(libxl__gc *gc,
                              const libxl_domain_build_info *info,
                              uint64_t *out);
diff --git a/tools/libxl/libxl_arm.c b/tools/libxl/libxl_arm.c
index bf31b9b3ca..2f1ca69431 100644
--- a/tools/libxl/libxl_arm.c
+++ b/tools/libxl/libxl_arm.c
@@ -1191,6 +1191,30 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc *gc,
     libxl_domain_build_info_init_type(b_info, LIBXL_DOMAIN_TYPE_PVH);
 }
 
+int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc,
+                                            uint32_t domid,
+                                            libxl_domain_config *d_config,
+                                            const libxl_physinfo *physinfo)
+{
+    int rc;
+    libxl_domain_create_info *const c_info = &d_config->c_info;
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_ENABLED) {
+        c_info->passthrough = LIBXL_PASSTHROUGH_SHARE_PT;
+    }
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_SYNC_PT) {
+        LOGD(ERROR, domid,
+             "passthrough=\"sync_pt\" not supported on ARM\n");
+        rc = ERROR_INVAL;
+        goto out;
+    }
+
+    rc = 0;
+ out:
+    return rc;
+}
+
 /*
  * Local variables:
  * mode: C
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 3d2cb52bf7..7423bedf7d 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -57,18 +57,6 @@ int libxl__domain_create_info_setdefault(libxl__gc *gc,
     if (!c_info->ssidref)
         c_info->ssidref = SECINITSID_DOMU;
 
-    if (info->cap_hvm_directio &&
-        (c_info->passthrough == LIBXL_PASSTHROUGH_UNKNOWN)) {
-        c_info->passthrough = ((c_info->type == LIBXL_DOMAIN_TYPE_PV) ||
-                               !info->cap_iommu_hap_pt_share) ?
-            LIBXL_PASSTHROUGH_SYNC_PT : LIBXL_PASSTHROUGH_SHARE_PT;
-    } else if (!info->cap_hvm_directio) {
-        c_info->passthrough = LIBXL_PASSTHROUGH_DISABLED;
-    }
-
-    /* An explicit setting should now have been chosen */
-    assert(c_info->passthrough != LIBXL_PASSTHROUGH_UNKNOWN);
-
     return 0;
 }
 
@@ -904,6 +892,7 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
     libxl_ctx *ctx = libxl__gc_owner(gc);
     int ret;
     bool pod_enabled = false;
+    libxl_domain_create_info *c_info = &d_config->c_info;
 
     libxl_physinfo physinfo;
     ret = libxl_get_physinfo(CTX, &physinfo);
@@ -975,6 +964,34 @@ int libxl__domain_config_setdefault(libxl__gc *gc,
         goto error_out;
     }
 
+    bool need_pt = d_config->num_pcidevs || d_config->num_dtdevs;
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_UNKNOWN) {
+        c_info->passthrough = need_pt
+            ? LIBXL_PASSTHROUGH_ENABLED : LIBXL_PASSTHROUGH_DISABLED;
+    }
+
+    bool iommu_enabled = physinfo.cap_hvm_directio;
+    if (c_info->passthrough != LIBXL_PASSTHROUGH_DISABLED && !iommu_enabled) {
+        LOGD(ERROR, domid,
+             "passthrough not supported on this platform\n");
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_DISABLED && need_pt) {
+        LOGD(ERROR, domid,
+             "passthrough disabled but devices are specified");
+        ret = ERROR_INVAL;
+        goto error_out;
+    }
+
+    ret = libxl__arch_passthrough_mode_setdefault(gc,domid,d_config,&physinfo);
+    if (ret) goto error_out;
+
+    /* An explicit setting should now have been chosen */
+    assert(c_info->passthrough != LIBXL_PASSTHROUGH_UNKNOWN);
+    assert(c_info->passthrough != LIBXL_PASSTHROUGH_ENABLED);
+
     /* If target_memkb is smaller than max_memkb, the subsequent call
      * to libxc when building HVM domain will enable PoD mode.
      */
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 3ac9494b80..ca47db2961 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -266,8 +266,9 @@ libxl_vkb_backend = Enumeration("vkb_backend", [
 libxl_passthrough = Enumeration("passthrough", [
     (0, "unknown"),
     (1, "disabled"),
-    (2, "sync_pt"),
-    (3, "share_pt"),
+    (2, "enabled"), # becomes {sync,share}_pt once defaults are evaluated
+    (3, "sync_pt"),
+    (4, "share_pt"),
     ])
 
 #
diff --git a/tools/libxl/libxl_x86.c b/tools/libxl/libxl_x86.c
index c0f88a7eaa..8b804537ba 100644
--- a/tools/libxl/libxl_x86.c
+++ b/tools/libxl/libxl_x86.c
@@ -631,6 +631,47 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc *gc,
     libxl_defbool_setdefault(&b_info->acpi, true);
 }
 
+int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc,
+                                            uint32_t domid,
+                                            libxl_domain_config *d_config,
+                                            const libxl_physinfo *physinfo)
+{
+    int rc;
+    libxl_domain_create_info *const c_info = &d_config->c_info;
+
+    if (c_info->passthrough != LIBXL_PASSTHROUGH_DISABLED &&
+        c_info->type == LIBXL_DOMAIN_TYPE_PVH) {
+        LOGD(ERROR, domid,
+             "passthrough not yet supported for x86 PVH guests\n");
+        rc = ERROR_INVAL;
+        goto out;
+    }
+
+    const char *whynot_pt_share =
+        c_info->type == LIBXL_DOMAIN_TYPE_PV ? "not valid for PV domain" :
+        !physinfo->cap_iommu_hap_pt_share ? "not supported on this platform" :
+        !libxl_defbool_val(d_config->c_info.hap) ?"only valid for HAP guests":
+        NULL;
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_ENABLED) {
+        c_info->passthrough = whynot_pt_share
+            ? LIBXL_PASSTHROUGH_SYNC_PT : LIBXL_PASSTHROUGH_SHARE_PT;
+    }
+
+    if (c_info->passthrough == LIBXL_PASSTHROUGH_SHARE_PT && whynot_pt_share) {
+        LOGD(ERROR, domid,
+             "passthrough=\"share_pt\" %s\n",
+             whynot_pt_share);
+        rc = ERROR_INVAL;
+        goto out;
+    }
+
+    rc = 0;
+ out:
+    return rc;
+}
+
+
 /*
  * Local variables:
  * mode: C
diff --git a/tools/xl/xl_parse.c b/tools/xl/xl_parse.c
index 79871c22d0..112f8ee026 100644
--- a/tools/xl/xl_parse.c
+++ b/tools/xl/xl_parse.c
@@ -1222,7 +1222,6 @@ void parse_config_data(const char *config_source,
     int pci_seize = 0;
     int i, e;
     char *kernel_basename;
-    bool iommu_enabled, iommu_hap_pt_share;
 
     libxl_domain_create_info *c_info = &d_config->c_info;
     libxl_domain_build_info *b_info = &d_config->b_info;
@@ -1234,8 +1233,6 @@ void parse_config_data(const char *config_source,
         exit(EXIT_FAILURE);
     }
 
-    iommu_enabled = physinfo.cap_hvm_directio;
-    iommu_hap_pt_share = physinfo.cap_iommu_hap_pt_share;
     libxl_physinfo_dispose(&physinfo);
 
     config= xlu_cfg_init(stderr, config_source);
@@ -1509,67 +1506,13 @@ void parse_config_data(const char *config_source,
         }
     }
 
-    if (xlu_cfg_get_string(config, "passthrough", &buf, 0)) {
-        c_info->passthrough =
-            (d_config->num_pcidevs || d_config->num_dtdevs)
-            ? LIBXL_PASSTHROUGH_UNKNOWN : LIBXL_PASSTHROUGH_DISABLED;
-    } else {
-        if (!strcasecmp("enabled", buf))
-            c_info->passthrough = LIBXL_PASSTHROUGH_UNKNOWN;
-        else {
-            libxl_passthrough o;
-
-            e = libxl_passthrough_from_string(buf, &o);
-            if (e || !strcasecmp("unknown", buf)) {
-                fprintf(stderr,
-                        "ERROR: unknown passthrough option '%s'\n",
-                        buf);
-                exit(-ERROR_FAIL);
-            }
-
-            c_info->passthrough = o;
-        }
-    }
-
-    switch (c_info->passthrough) {
-    case LIBXL_PASSTHROUGH_UNKNOWN:
-        /*
-         * Choose a suitable default. libxl would also do this but
-         * choosing here allows the code calculating 'iommu_memkb'
-         * below make an informed decision.
-         */
-        c_info->passthrough =
-            (c_info->type == LIBXL_DOMAIN_TYPE_PV) || !iommu_hap_pt_share
-            ? LIBXL_PASSTHROUGH_SYNC_PT : LIBXL_PASSTHROUGH_SHARE_PT;
-        break;
-
-    case LIBXL_PASSTHROUGH_DISABLED:
-        if (d_config->num_pcidevs || d_config->num_dtdevs) {
+    if (!xlu_cfg_get_string(config, "passthrough", &buf, 0)) {
+        if (libxl_passthrough_from_string(buf, &c_info->passthrough)) {
             fprintf(stderr,
-                    "ERROR: passthrough disabled but devices are specified\n");
-            exit(-ERROR_FAIL);
-        }
-        break;
-    case LIBXL_PASSTHROUGH_SHARE_PT:
-        if (c_info->type == LIBXL_DOMAIN_TYPE_PV) {
-            fprintf(stderr,
-                    "ERROR: passthrough=\"share_pt\" not valid for PV domain\n");
-            exit(-ERROR_FAIL);
-        } else if (!iommu_hap_pt_share) {
-            fprintf(stderr,
-                    "ERROR: passthrough=\"share_pt\" not supported on this platform\n");
-            exit(-ERROR_FAIL);
+                    "ERROR: unknown passthrough option '%s'\n",
+                    buf);
+            exit(1);
         }
-        break;
-    case LIBXL_PASSTHROUGH_SYNC_PT:
-        break;
-    }
-
-    if ((c_info->passthrough != LIBXL_PASSTHROUGH_DISABLED) &&
-        !iommu_enabled) {
-        fprintf(stderr,
-                "ERROR: passthrough not supported on this platform\n");
-        exit(-ERROR_FAIL);
     }
 
     if (!xlu_cfg_get_long(config, "shadow_memory", &l, 0))
-- 
2.11.0


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel