From: Daniel De Graaf <dgdegra@tycho.nsa.gov>
To: Doug Goldstein <cardoe@cardoe.com>, xen-devel@lists.xen.org
Subject: Re: [PATCH 13/17] xen: move FLASK entry under XSM in Kconfig
Date: Mon, 20 Jun 2016 11:11:23 -0400 [thread overview]
Message-ID: <534c2512-f9dc-ac20-11bf-91aa9e6ef4c2@tycho.nsa.gov> (raw)
In-Reply-To: <65897dea-53f0-b437-da97-5338fbbcb6e9@cardoe.com>
On 06/20/2016 10:46 AM, Doug Goldstein wrote:
> On 6/20/16 9:04 AM, Daniel De Graaf wrote:
>> Since enabling XSM is required to enable FLASK, place the option for
>> FLASK below the one for XSM. In addition, since it does not make sense
>> to enable XSM without any XSM providers, and FLASK is the only XSM
>> provider, hide the option to disable FLASK under EXPERT.
>>
>> Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
>> ---
>
>> @@ -137,6 +119,25 @@ config XSM
>>
>> If unsure, say N.
>>
>> +config FLASK
>> + def_bool y
>> + bool "FLux Advanced Security Kernel support" if EXPERT = "y"
>
> Ok. Here's the real review. I think you want the prompt to be optional
> if EXPERT is enabled then I think you need to use "prompt" instead of
> "bool". You've already got this set to a bool with the "def_bool" line.
OK. This version also apparently works, since I tested it, but if
prompt is the preferred keyword I'll change it.
--
Daniel De Graaf
National Security Agency
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-06-20 15:11 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-20 14:04 [PATCH v2 00/17] XSM/FLASK updates for 4.8 Daniel De Graaf
2016-06-20 14:04 ` [PATCH 01/17] flask/policy: split into modules Daniel De Graaf
2016-06-20 14:04 ` [PATCH 02/17] flask/policy: split out rules for system_r Daniel De Graaf
2016-06-20 14:04 ` [PATCH 03/17] flask/policy: move user definitions and constraints into modules Daniel De Graaf
2016-06-20 14:04 ` [PATCH 04/17] flask/policy: remove unused support for binary modules Daniel De Graaf
2016-06-20 14:04 ` [PATCH 05/17] flask/policy: xenstore stubdom policy Daniel De Graaf
2016-06-20 14:04 ` [PATCH 06/17] flask/policy: remove unused example Daniel De Graaf
2016-06-20 14:04 ` [PATCH 07/17] flask: unify {get, set}vcpucontext permissions Daniel De Graaf
2016-06-20 14:27 ` Doug Goldstein
2016-06-20 14:35 ` Andrew Cooper
2016-06-20 14:50 ` Daniel De Graaf
2016-06-20 14:58 ` Andrew Cooper
2016-06-20 14:04 ` [PATCH 08/17] flask: remove unused secondary context in ocontext Daniel De Graaf
2016-06-20 14:30 ` Doug Goldstein
2016-06-20 14:04 ` [PATCH 09/17] flask: remove unused AVC callback functions Daniel De Graaf
2016-06-20 14:32 ` Doug Goldstein
2016-06-20 14:04 ` [PATCH 10/17] flask: remove xen_flask_userlist operation Daniel De Graaf
2016-06-20 14:19 ` Jan Beulich
2016-06-20 14:35 ` Doug Goldstein
2016-06-20 15:07 ` Daniel De Graaf
2016-06-20 15:16 ` Doug Goldstein
2016-06-20 14:04 ` [PATCH 11/17] flask: improve unknown permission handling Daniel De Graaf
2016-06-20 14:37 ` Doug Goldstein
2016-06-20 14:04 ` [PATCH 12/17] xen/xsm: remove .xsm_initcall.init section Daniel De Graaf
2016-06-20 14:38 ` Doug Goldstein
2016-06-21 15:21 ` Andrew Cooper
2016-06-21 15:41 ` Julien Grall
2016-06-21 16:03 ` Andrew Cooper
2016-06-20 14:04 ` [PATCH 13/17] xen: move FLASK entry under XSM in Kconfig Daniel De Graaf
2016-06-20 14:41 ` Doug Goldstein
2016-06-20 14:42 ` Doug Goldstein
2016-06-20 14:46 ` Doug Goldstein
2016-06-20 15:11 ` Daniel De Graaf [this message]
2016-06-20 15:28 ` Jan Beulich
2016-06-20 16:49 ` Doug Goldstein
2016-06-21 17:09 ` [PATCH 13/17 v3] " Daniel De Graaf
2016-06-24 14:43 ` Doug Goldstein
2016-06-20 14:04 ` [PATCH 14/17] xsm: annotate setup functions with __init Daniel De Graaf
2016-06-20 14:46 ` Doug Goldstein
2016-06-20 14:04 ` [PATCH 15/17] xsm: clean up unregistration Daniel De Graaf
2016-06-20 14:47 ` Doug Goldstein
2016-06-20 14:04 ` [PATCH 16/17] xen: Make FLASK_AVC_STATS kconfig option visible Daniel De Graaf
2016-06-20 14:49 ` Doug Goldstein
2016-06-20 14:04 ` [PATCH 17/17] xsm: add a default policy to .init.data Daniel De Graaf
2016-06-20 14:52 ` Doug Goldstein
2016-06-24 16:30 ` Julien Grall
2016-06-24 16:50 ` Konrad Rzeszutek Wilk
2016-06-24 17:34 ` Daniel De Graaf
2016-06-24 17:40 ` Konrad Rzeszutek Wilk
2016-06-24 17:42 ` Daniel De Graaf
2016-06-24 17:46 ` Konrad Rzeszutek Wilk
2016-06-24 18:02 ` Daniel De Graaf
2016-06-24 18:36 ` Konrad Rzeszutek Wilk
2016-06-24 17:41 ` Konrad Rzeszutek Wilk
2016-06-24 17:47 ` Julien Grall
2016-06-24 17:44 ` Julien Grall
2016-06-21 15:24 ` [PATCH v2 00/17] XSM/FLASK updates for 4.8 Andrew Cooper
2016-06-27 9:48 ` Andrew Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=534c2512-f9dc-ac20-11bf-91aa9e6ef4c2@tycho.nsa.gov \
--to=dgdegra@tycho.nsa.gov \
--cc=cardoe@cardoe.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).