From: "Michał Leszczyński" <michal.leszczynski@cert.pl>
To: xen-devel@lists.xenproject.org
Cc: Julien Grall <julien@xen.org>,
Stefano Stabellini <sstabellini@kernel.org>,
tamas.lengyel@intel.com, Wei Liu <wl@xen.org>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Michal Leszczynski <michal.leszczynski@cert.pl>,
Ian Jackson <ian.jackson@eu.citrix.com>,
George Dunlap <george.dunlap@citrix.com>,
Jan Beulich <jbeulich@suse.com>,
Anthony PERARD <anthony.perard@citrix.com>,
luwei.kang@intel.com
Subject: [PATCH v4 03/10] tools/libxl: add vmtrace_pt_size parameter
Date: Tue, 30 Jun 2020 14:33:46 +0200 [thread overview]
Message-ID: <5f4f4b1afa432258daff43f2dc8119b6a441fff4.1593519420.git.michal.leszczynski@cert.pl> (raw)
In-Reply-To: <cover.1593519420.git.michal.leszczynski@cert.pl>
In-Reply-To: <cover.1593519420.git.michal.leszczynski@cert.pl>
From: Michal Leszczynski <michal.leszczynski@cert.pl>
Allow to specify the size of per-vCPU trace buffer upon
domain creation. This is zero by default (meaning: not enabled).
Signed-off-by: Michal Leszczynski <michal.leszczynski@cert.pl>
---
docs/man/xl.cfg.5.pod.in | 10 ++++++++++
tools/golang/xenlight/helpers.gen.go | 2 ++
tools/golang/xenlight/types.gen.go | 1 +
tools/libxl/libxl.h | 8 ++++++++
tools/libxl/libxl_create.c | 1 +
tools/libxl/libxl_types.idl | 2 ++
tools/xl/xl_parse.c | 20 ++++++++++++++++++++
xen/common/domain.c | 12 ++++++++++++
xen/include/public/domctl.h | 1 +
9 files changed, 57 insertions(+)
diff --git a/docs/man/xl.cfg.5.pod.in b/docs/man/xl.cfg.5.pod.in
index 0532739c1f..78f434b722 100644
--- a/docs/man/xl.cfg.5.pod.in
+++ b/docs/man/xl.cfg.5.pod.in
@@ -278,6 +278,16 @@ memory=8096 will report significantly less memory available for use
than a system with maxmem=8096 memory=8096 due to the memory overhead
of having to track the unused pages.
+=item B<vmtrace_pt_size=BYTES>
+
+Specifies the size of processor trace buffer that would be allocated
+for each vCPU belonging to this domain. Disabled (i.e. B<vmtrace_pt_size=0>
+by default. This must be set to non-zero value in order to be able to
+use processor tracing features with this domain.
+
+B<NOTE>: The size value must be between 4 kB and 4 GB and it must
+be also a power of 2.
+
=back
=head3 Guest Virtual NUMA Configuration
diff --git a/tools/golang/xenlight/helpers.gen.go b/tools/golang/xenlight/helpers.gen.go
index 935d3bc50a..ecace9634e 100644
--- a/tools/golang/xenlight/helpers.gen.go
+++ b/tools/golang/xenlight/helpers.gen.go
@@ -1117,6 +1117,7 @@ return fmt.Errorf("invalid union key '%v'", x.Type)}
x.ArchArm.GicVersion = GicVersion(xc.arch_arm.gic_version)
x.ArchArm.Vuart = VuartType(xc.arch_arm.vuart)
x.Altp2M = Altp2MMode(xc.altp2m)
+x.VmtracePtOrder = int(xc.vmtrace_pt_order)
return nil}
@@ -1592,6 +1593,7 @@ return fmt.Errorf("invalid union key '%v'", x.Type)}
xc.arch_arm.gic_version = C.libxl_gic_version(x.ArchArm.GicVersion)
xc.arch_arm.vuart = C.libxl_vuart_type(x.ArchArm.Vuart)
xc.altp2m = C.libxl_altp2m_mode(x.Altp2M)
+xc.vmtrace_pt_order = C.int(x.VmtracePtOrder)
return nil
}
diff --git a/tools/golang/xenlight/types.gen.go b/tools/golang/xenlight/types.gen.go
index 663c1e86b4..f9b07ac862 100644
--- a/tools/golang/xenlight/types.gen.go
+++ b/tools/golang/xenlight/types.gen.go
@@ -516,6 +516,7 @@ GicVersion GicVersion
Vuart VuartType
}
Altp2M Altp2MMode
+VmtracePtOrder int
}
type domainBuildInfoTypeUnion interface {
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index 71709dc585..891e8e28d6 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -438,6 +438,14 @@
*/
#define LIBXL_HAVE_CREATEINFO_PASSTHROUGH 1
+/*
+ * LIBXL_HAVE_VMTRACE_PT_ORDER indicates that
+ * libxl_domain_create_info has a vmtrace_pt_order parameter, which
+ * allows to enable pre-allocation of processor tracing buffers
+ * with the given order of size.
+ */
+#define LIBXL_HAVE_VMTRACE_PT_ORDER 1
+
/*
* libxl ABI compatibility
*
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 75862dc6ed..651d1f4c0f 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -608,6 +608,7 @@ int libxl__domain_make(libxl__gc *gc, libxl_domain_config *d_config,
.max_evtchn_port = b_info->event_channels,
.max_grant_frames = b_info->max_grant_frames,
.max_maptrack_frames = b_info->max_maptrack_frames,
+ .vmtrace_pt_order = b_info->vmtrace_pt_order,
};
if (info->type != LIBXL_DOMAIN_TYPE_PV) {
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 9d3f05f399..1c5dd43e4d 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -645,6 +645,8 @@ libxl_domain_build_info = Struct("domain_build_info",[
# supported by x86 HVM and ARM support is planned.
("altp2m", libxl_altp2m_mode),
+ ("vmtrace_pt_order", integer),
+
], dir=DIR_IN,
copy_deprecated_fn="libxl__domain_build_info_copy_deprecated",
)
diff --git a/tools/xl/xl_parse.c b/tools/xl/xl_parse.c
index 61b4ef7b7e..4eba224590 100644
--- a/tools/xl/xl_parse.c
+++ b/tools/xl/xl_parse.c
@@ -1861,6 +1861,26 @@ void parse_config_data(const char *config_source,
}
}
+ if (!xlu_cfg_get_long(config, "vmtrace_pt_size", &l, 1) && l) {
+ int32_t shift = 0;
+
+ if (l & (l - 1))
+ {
+ fprintf(stderr, "ERROR: pt buffer size must be a power of 2\n");
+ exit(1);
+ }
+
+ while (l >>= 1) ++shift;
+
+ if (shift <= XEN_PAGE_SHIFT)
+ {
+ fprintf(stderr, "ERROR: too small pt buffer\n");
+ exit(1);
+ }
+
+ b_info->vmtrace_pt_order = shift - XEN_PAGE_SHIFT;
+ }
+
if (!xlu_cfg_get_list(config, "ioports", &ioports, &num_ioports, 0)) {
b_info->num_ioports = num_ioports;
b_info->ioports = calloc(num_ioports, sizeof(*b_info->ioports));
diff --git a/xen/common/domain.c b/xen/common/domain.c
index 0a33e0dfd6..27dcfbac8c 100644
--- a/xen/common/domain.c
+++ b/xen/common/domain.c
@@ -338,6 +338,12 @@ static int sanitise_domain_config(struct xen_domctl_createdomain *config)
return -EINVAL;
}
+ if ( config->vmtrace_pt_order && !vmtrace_supported )
+ {
+ dprintk(XENLOG_INFO, "Processor tracing is not supported\n");
+ return -EINVAL;
+ }
+
return arch_sanitise_domain_config(config);
}
@@ -443,6 +449,12 @@ struct domain *domain_create(domid_t domid,
d->nr_pirqs = min(d->nr_pirqs, nr_irqs);
radix_tree_init(&d->pirq_tree);
+
+ if ( config->vmtrace_pt_order )
+ {
+ uint32_t shift_val = config->vmtrace_pt_order + PAGE_SHIFT;
+ d->vmtrace_pt_size = (1ULL << shift_val);
+ }
}
if ( (err = arch_domain_create(d, config)) != 0 )
diff --git a/xen/include/public/domctl.h b/xen/include/public/domctl.h
index 59bdc28c89..7b8289d436 100644
--- a/xen/include/public/domctl.h
+++ b/xen/include/public/domctl.h
@@ -92,6 +92,7 @@ struct xen_domctl_createdomain {
uint32_t max_evtchn_port;
int32_t max_grant_frames;
int32_t max_maptrack_frames;
+ uint8_t vmtrace_pt_order;
struct xen_arch_domainconfig arch;
};
--
2.20.1
next prev parent reply other threads:[~2020-06-30 12:35 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-30 12:33 [PATCH v4 00/10] Implement support for external IPT monitoring Michał Leszczyński
2020-06-30 12:33 ` [PATCH v4 01/10] x86/vmx: add Intel PT MSR definitions Michał Leszczyński
2020-06-30 16:23 ` Jan Beulich
2020-06-30 17:37 ` Andrew Cooper
2020-06-30 18:03 ` Tamas K Lengyel
2020-06-30 18:27 ` Michał Leszczyński
2020-07-01 17:52 ` Andrew Cooper
2020-06-30 12:33 ` [PATCH v4 02/10] x86/vmx: add IPT cpu feature Michał Leszczyński
2020-07-01 9:49 ` Roger Pau Monné
2020-07-01 15:12 ` Julien Grall
2020-07-01 16:06 ` Andrew Cooper
2020-07-01 16:17 ` Julien Grall
2020-07-01 16:18 ` Julien Grall
2020-07-01 17:26 ` Andrew Cooper
2020-07-01 18:02 ` Julien Grall
2020-07-01 18:06 ` Andrew Cooper
2020-07-01 18:09 ` Julien Grall
2020-07-02 8:29 ` Jan Beulich
2020-07-02 8:42 ` Julien Grall
2020-07-02 8:50 ` Jan Beulich
2020-07-02 8:54 ` Julien Grall
2020-07-02 9:18 ` Jan Beulich
2020-07-02 9:57 ` Julien Grall
2020-07-02 13:30 ` Jan Beulich
2020-07-02 14:14 ` Julien Grall
2020-07-02 14:17 ` Jan Beulich
2020-07-02 14:31 ` Julien Grall
2020-07-02 20:28 ` Michał Leszczyński
2020-07-03 7:58 ` Julien Grall
2020-07-04 19:16 ` Michał Leszczyński
2020-07-01 21:42 ` Andrew Cooper
2020-07-02 8:10 ` Roger Pau Monné
2020-07-02 8:34 ` Jan Beulich
2020-07-02 20:29 ` Michał Leszczyński
2020-06-30 12:33 ` Michał Leszczyński [this message]
2020-07-01 10:05 ` [PATCH v4 03/10] tools/libxl: add vmtrace_pt_size parameter Roger Pau Monné
2020-07-02 9:00 ` Roger Pau Monné
2020-07-02 16:23 ` Michał Leszczyński
2020-07-03 9:44 ` Roger Pau Monné
2020-07-03 9:56 ` Jan Beulich
2020-07-03 10:11 ` Roger Pau Monné
2020-07-04 17:23 ` Julien Grall
2020-07-06 8:46 ` Jan Beulich
2020-07-07 8:44 ` Julien Grall
2020-07-07 9:10 ` Jan Beulich
2020-07-07 9:16 ` Julien Grall
2020-07-07 11:17 ` Michał Leszczyński
2020-07-07 11:21 ` Jan Beulich
2020-07-07 11:35 ` Michał Leszczyński
2020-07-02 10:24 ` Anthony PERARD
2020-07-04 17:48 ` Julien Grall
2020-06-30 12:33 ` [PATCH v4 04/10] x86/vmx: implement processor tracing for VMX Michał Leszczyński
2020-07-01 10:30 ` Roger Pau Monné
2020-06-30 12:33 ` [PATCH v4 05/10] common/domain: allocate vmtrace_pt_buffer Michał Leszczyński
2020-07-01 10:38 ` Roger Pau Monné
2020-07-01 15:35 ` Julien Grall
2020-06-30 12:33 ` [PATCH v4 06/10] memory: batch processing in acquire_resource() Michał Leszczyński
2020-07-01 10:46 ` Roger Pau Monné
2020-07-03 10:35 ` Julien Grall
2020-07-03 10:52 ` Paul Durrant
2020-07-03 11:17 ` Julien Grall
2020-07-03 11:22 ` Jan Beulich
2020-07-03 11:36 ` Julien Grall
2020-07-03 12:50 ` Jan Beulich
2020-07-03 11:40 ` Paul Durrant
2020-06-30 12:33 ` [PATCH v4 07/10] x86/mm: add vmtrace_buf resource type Michał Leszczyński
2020-07-01 10:52 ` Roger Pau Monné
2020-06-30 12:33 ` [PATCH v4 08/10] x86/domctl: add XEN_DOMCTL_vmtrace_op Michał Leszczyński
2020-07-01 11:00 ` Roger Pau Monné
2020-06-30 12:33 ` [PATCH v4 09/10] tools/libxc: add xc_vmtrace_* functions Michał Leszczyński
2020-07-21 10:52 ` Wei Liu
2020-06-30 12:33 ` [PATCH v4 10/10] tools/proctrace: add proctrace tool Michał Leszczyński
2020-07-02 15:10 ` Andrew Cooper
2020-07-21 10:52 ` Wei Liu
2020-06-30 12:48 ` [PATCH v4 00/10] Implement support for external IPT monitoring Hubert Jasudowicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5f4f4b1afa432258daff43f2dc8119b6a441fff4.1593519420.git.michal.leszczynski@cert.pl \
--to=michal.leszczynski@cert.pl \
--cc=andrew.cooper3@citrix.com \
--cc=anthony.perard@citrix.com \
--cc=george.dunlap@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=julien@xen.org \
--cc=luwei.kang@intel.com \
--cc=sstabellini@kernel.org \
--cc=tamas.lengyel@intel.com \
--cc=wl@xen.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).