From: Alexia Benington <alexbenington@gmail.com>
To: xen-devel@lists.xensource.com
Subject: (no subject)
Date: Fri, 23 Jan 2009 01:45:32 -0500 [thread overview]
Message-ID: <7969168f0901222245o3a520f03wb513c30169006f0e@mail.gmail.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 4183 bytes --]
Hi all,
My Dom0 crashed if I use the first grub configuration, but is ok if I use
the following one.
kernel /boot/xen-3.4-unstable.gz
module /boot/vmlinuz-2.6.18.8-xen root=/dev/sda2 ro
kernel /boot/xen-3.4-unstable.gz com1=9600,8n1 console=com1 iommu=1
module /boot/vmlinuz-2.6.18.8-xen root=/dev/sda2 ro xencons=ttyS
console=tty0 console=ttyS0
I've attached the full boot trace. Below is a snippet of the crash region.
Does anyone have any idea what's going on?
Thanks and have a nice day.
- Alexia
================================================
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
(XEN) [VT-D]iommu.c:721: iommu_page_fault: iommu->reg = ffff828bfff55000
(XEN) [VT-D]iommu.c:693: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:675: iommu_fault:DMA Read: 0:1a.0 addr bf7ed000 REASON 6
iommu->reg = ffff828bfff55000
(XEN) print_vtd_entries: iommu = ffff8300bfef10f0 bdf = 0:1a:0 gmfn = bf7ed
(XEN) root_entry = ffff83013bdea000
(XEN) root_entry[0] = 1374a0001
(XEN) context = ffff8301374a0000
(XEN) context[d0] = 101_13bde6001
(XEN) l3 = ffff83013bde6000
(XEN) l3_index = 2
(XEN) l3[2] = 137a83003
(XEN) l2 = ffff830137a83000
(XEN) l2_index = 1fb
(XEN) l2[1fb] = 137887003
(XEN) l1 = ffff830137887000
(XEN) l1_index = 1ed
(XEN) l1[1ed] = 0
(XEN) l1[1ed] not present
uhci_hcd 0000:00:1a.0: host system error, PCI problems?
uhci_hcd 0000:00:1a.0: host controller halted, very bad!
uhci_hcd 0000:00:1a.0: HC died; cleaning up
usb usb1: configuration #1 chosen from 1 choice
usb usb1: can't set config #1, error -108
uhci_hcd 0000:00:1a.0: HC died; cleaning up
Unable to handle kernel NULL pointer dereference at 0000000000000018 RIP:
[<ffffffff88019be9>] :usbcore:usb_kick_khubd+0x7/0x17
PGD ef053067 PUD ef051067 PMD 0
Oops: 0000 [1] SMP
CPU 3
Modules linked in: uhci_hcd usbcore thermal processor fan
Pid: 496, comm: insmod Not tainted 2.6.18.8-xen #1
RIP: e030:[<ffffffff88019be9>] [<ffffffff88019be9>]
:usbcore:usb_kick_khubd+0x7/0x17
RSP: e02b:ffff8800eeb6fc50 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff8800eed03c00 RCX: ffffffffff578000
RDX: ffffffffff578000 RSI: 0000000000000001 RDI: ffff8800ef03e000
RBP: 0000000000000000 R08: 000000000000000e R09: 0000000000000001
R10: ffff8800ef052570 R11: ffffffff80300885 R12: ffff8800eecb01c8
R13: 0000000000000000 R14: ffff8800ef03e000 R15: ffff8800eecb0070
FS: 00002ad0ef6c66d0(0000) GS:ffffffff804d9180(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000
Process insmod (pid: 496, threadinfo ffff8800eeb6e000, task
ffff8800eec867a0)
Stack: ffffffff8801a39b 0000000000000012 ffff8800ef03e000 ffff8800eed03c00
ffffffff8801ad3c 0000001000000004 ffff8800eecb00e0 ffff8800eed03c00
ffff8800eecb0000 0000000000000004 ffffffff8803d4a0 0000000000000000
Call Trace:
[<ffffffff8801a39b>] :usbcore:usb_hc_died+0x5f/0x72
[<ffffffff8801ad3c>] :usbcore:usb_add_hcd+0x4eb/0x562
[<ffffffff880230cf>] :usbcore:usb_hcd_pci_probe+0x1e6/0x28f
[<ffffffff802f4f5e>] pci_device_probe+0x4c/0x75
[<ffffffff8034f250>] pci_bus_probe_wrapper+0x86/0x92
[<ffffffff802f4e48>] pci_match_device+0x13/0xbd
[<ffffffff8803d000>] :uhci_hcd:uhci_start+0x21e/0x3c0
[<ffffffff802f4f06>] pci_bus_match+0x14/0x20
[<ffffffff80346048>] driver_probe_device+0x52/0xa8
[<ffffffff80346177>] __driver_attach+0x6d/0xaa
[<ffffffff8034610a>] __driver_attach+0x0/0xaa
[<ffffffff80345a49>] bus_for_each_dev+0x43/0x6e
[<ffffffff803456a7>] bus_add_driver+0x7e/0x130
[<ffffffff802f50f9>] __pci_register_driver+0x57/0x7d
[<ffffffff8804305c>] :uhci_hcd:uhci_hcd_init+0x5c/0x97
[<ffffffff8024b1f5>] sys_init_module+0x16cc/0x1883
[<ffffffff8020a518>] system_call+0x68/0x6d
[<ffffffff8020a4b0>] system_call+0x0/0x6d
Code: 48 8b 40 18 48 8b b8 f0 01 00 00 e9 52 db ff ff 41 56 41 55
RIP [<ffffffff88019be9>] :usbcore:usb_kick_khubd+0x7/0x17
RSP <ffff8800eeb6fc50>
CR2: 0000000000000018
Killed
[-- Attachment #1.2: Type: text/html, Size: 5276 bytes --]
[-- Attachment #2: boottrace.txt --]
[-- Type: text/plain, Size: 16160 bytes --]
\ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.4-unstable (xxx@xxx.xxx.xxx) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) Thu Jan 22 12:06:54 EST 2009
(XEN) Latest ChangeSet: Thu Jan 22 11:07:32 2009 +0000 19067:a92ed09b4032
(XEN) Command line: com1=9600,8n1 console=com1 iommu=1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e800 (usable)
(XEN) 000000000009e800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bfae1000 (usable)
(XEN) 00000000bfae1000 - 00000000bfb24000 (ACPI NVS)
(XEN) 00000000bfb24000 - 00000000bfd42000 (reserved)
(XEN) 00000000bfd42000 - 00000000bfd43000 (ACPI NVS)
(XEN) 00000000bfd43000 - 00000000bfd48000 (reserved)
(XEN) 00000000bfd48000 - 00000000bfd50000 (ACPI data)
(XEN) 00000000bfd50000 - 00000000bfd6b000 (ACPI NVS)
(XEN) 00000000bfd6b000 - 00000000bfd8a000 (reserved)
(XEN) 00000000bfd8a000 - 00000000bfd90000 (ACPI NVS)
(XEN) 00000000bfd90000 - 00000000bff00000 (usable)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000013c000000 (usable)
(XEN) System RAM: 4027MB (4124604kB)
(XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
(XEN) ACPI: XSDT BFD4EE18, 005C (r1 INTEL DQ45CB 43 MSFT 10013)
(XEN) ACPI: FACP BFD4DD98, 00F4 (r4 INTEL A M I 6222004 MSFT 10013)
(XEN) ACPI: DSDT BFD48018, 4EFD (r1 INTEL DQ45CB 43 INTL 20051117)
(XEN) ACPI: FACS BFD56F40, 0040
(XEN) ACPI: APIC BFD4DF18, 006C (r2 INTEL DQ45CB 43 MSFT 10013)
(XEN) ACPI: MCFG BFD58E18, 003C (r1 INTEL DQ45CB 43 MSFT 97)
(XEN) ACPI: ASF! BFD57D18, 00A0 (r32 INTEL DQ45CB 43 TFSM F4240)
(XEN) ACPI: SPCR BFD58D18, 0050 (r1 INTEL DQ45CB 43 AMI. 3)
(XEN) ACPI: TCPA BFD58C98, 0032 (r2 INTEL DQ45CB 43 MSFT 1000013)
(XEN) ACPI: DMAR BFD42F18, 00D8 (r1 INTEL DQ45CB 43 INTL 1)
(XEN) Domain heap initialised
(XEN) Processor #0 7:7 APIC version 20
(XEN) Processor #1 7:7 APIC version 20
(XEN) Processor #2 7:7 APIC version 20
(XEN) Processor #3 7:7 APIC version 20
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Intel VT-d has been enabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2499.770 MHz processor.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
(XEN) Booting processor 1/1 eip 8c000
(XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
(XEN) Booting processor 2/2 eip 8c000
(XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
(XEN) Booting processor 3/3 eip 8c000
(XEN) CPU3: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) Brought up 4 CPUs
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) mtrr: your CPUs had inconsistent fixed MTRR settings
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805bf88c
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000134000000->0000000136000000 (970253 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff805bf88c
(XEN) Init. ramdisk: ffffffff805c0000->ffffffff80956400
(XEN) Phys-Mach map: ffffffff80957000->ffffffff810ce068
(XEN) Start info: ffffffff810cf000->ffffffff810cf4b4
(XEN) Page tables: ffffffff810d0000->ffffffff810dd000
(XEN) Boot stack: ffffffff810dd000->ffffffff810de000
(XEN) TOTAL: ffffffff80000000->ffffffff81400000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 108kB init memory.
kernel direct mapping tables up to ef60d000 @ 10e0000-1861000
Bootdata ok (command line is root=/dev/sda2 ro xencons=ttyS console=tty0 console=ttyS0)
Linux version 2.6.18.8-xen (root@amber) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Thu Jan 22 12:02:23 EST 2009
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000ef60d000 (usable)
DMI 2.4 present.
No mptable found.
>>> ERROR: Invalid checksum
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c0000000 (gap: bff00000:3ee1c000)
Built 1 zonelists. Total pages: 967088
Kernel command line: root=/dev/sda2 ro xencons=ttyS console=tty0 console=ttyS0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2499.770 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: ffff880005a7a000 - ffff880009a7a000
Address size: 27 bits
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 3764092k/3921972k available (2027k kernel code, 149244k reserved, 887k data, 180k init)
Calibrating delay using timer specific routine.. 5000.60 BogoMIPS (lpj=25003009)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Brought up 4 CPUs
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
migration_cost=9
checking if image is initramfs... it is
Freeing initrd memory: 3673k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
pnp: PnP ACPI: found 10 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:02: ioport range 0xa20-0xa3f has been reserved
pnp: 00:02: ioport range 0xa00-0xa1f has been reserved
pnp: 00:02: ioport range 0xb78-0xb7f has been reserved
pnp: 00:02: ioport range 0xf78-0xf7f has been reserved
pnp: 00:09: ioport range 0x400-0x47f could not be reserved
pnp: 00:09: ioport range 0x1180-0x119f has been reserved
pnp: 00:09: ioport range 0x500-0x57f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: c0000000-d00fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: d0100000-d01fffff
PREFETCH window: disabled.
GSI 16 sharing vector 0xA8 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com>
audit: initializing netlink socket (disabled)
audit(1232672414.325:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
0000:00:1a.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 180k freed
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ IST] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) CPU 0 initialization completed
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) CPU 1 initialization completed
ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) CPU 2 initialization completed
ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
(XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space
(XEN) CPU 3 initialization completed
ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e0e0
(XEN) [VT-D]iommu.c:721: iommu_page_fault: iommu->reg = ffff828bfff55000
(XEN) [VT-D]iommu.c:693: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:675: iommu_fault:DMA Read: 0:1a.0 addr bf7ed000 REASON 6 iommu->reg = ffff828bfff55000
(XEN) print_vtd_entries: iommu = ffff8300bfef10f0 bdf = 0:1a:0 gmfn = bf7ed
(XEN) root_entry = ffff83013bdea000
(XEN) root_entry[0] = 1374a0001
(XEN) context = ffff8301374a0000
(XEN) context[d0] = 101_13bde6001
(XEN) l3 = ffff83013bde6000
(XEN) l3_index = 2
(XEN) l3[2] = 137a83003
(XEN) l2 = ffff830137a83000
(XEN) l2_index = 1fb
(XEN) l2[1fb] = 137887003
(XEN) l1 = ffff830137887000
(XEN) l1_index = 1ed
(XEN) l1[1ed] = 0
(XEN) l1[1ed] not present
uhci_hcd 0000:00:1a.0: host system error, PCI problems?
uhci_hcd 0000:00:1a.0: host controller halted, very bad!
uhci_hcd 0000:00:1a.0: HC died; cleaning up
usb usb1: configuration #1 chosen from 1 choice
usb usb1: can't set config #1, error -108
uhci_hcd 0000:00:1a.0: HC died; cleaning up
Unable to handle kernel NULL pointer dereference at 0000000000000018 RIP:
[<ffffffff88019be9>] :usbcore:usb_kick_khubd+0x7/0x17
PGD ef053067 PUD ef051067 PMD 0
Oops: 0000 [1] SMP
CPU 3
Modules linked in: uhci_hcd usbcore thermal processor fan
Pid: 496, comm: insmod Not tainted 2.6.18.8-xen #1
RIP: e030:[<ffffffff88019be9>] [<ffffffff88019be9>] :usbcore:usb_kick_khubd+0x7/0x17
RSP: e02b:ffff8800eeb6fc50 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff8800eed03c00 RCX: ffffffffff578000
RDX: ffffffffff578000 RSI: 0000000000000001 RDI: ffff8800ef03e000
RBP: 0000000000000000 R08: 000000000000000e R09: 0000000000000001
R10: ffff8800ef052570 R11: ffffffff80300885 R12: ffff8800eecb01c8
R13: 0000000000000000 R14: ffff8800ef03e000 R15: ffff8800eecb0070
FS: 00002ad0ef6c66d0(0000) GS:ffffffff804d9180(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000
Process insmod (pid: 496, threadinfo ffff8800eeb6e000, task ffff8800eec867a0)
Stack: ffffffff8801a39b 0000000000000012 ffff8800ef03e000 ffff8800eed03c00
ffffffff8801ad3c 0000001000000004 ffff8800eecb00e0 ffff8800eed03c00
ffff8800eecb0000 0000000000000004 ffffffff8803d4a0 0000000000000000
Call Trace:
[<ffffffff8801a39b>] :usbcore:usb_hc_died+0x5f/0x72
[<ffffffff8801ad3c>] :usbcore:usb_add_hcd+0x4eb/0x562
[<ffffffff880230cf>] :usbcore:usb_hcd_pci_probe+0x1e6/0x28f
[<ffffffff802f4f5e>] pci_device_probe+0x4c/0x75
[<ffffffff8034f250>] pci_bus_probe_wrapper+0x86/0x92
[<ffffffff802f4e48>] pci_match_device+0x13/0xbd
[<ffffffff8803d000>] :uhci_hcd:uhci_start+0x21e/0x3c0
[<ffffffff802f4f06>] pci_bus_match+0x14/0x20
[<ffffffff80346048>] driver_probe_device+0x52/0xa8
[<ffffffff80346177>] __driver_attach+0x6d/0xaa
[<ffffffff8034610a>] __driver_attach+0x0/0xaa
[<ffffffff80345a49>] bus_for_each_dev+0x43/0x6e
[<ffffffff803456a7>] bus_add_driver+0x7e/0x130
[<ffffffff802f50f9>] __pci_register_driver+0x57/0x7d
[<ffffffff8804305c>] :uhci_hcd:uhci_hcd_init+0x5c/0x97
[<ffffffff8024b1f5>] sys_init_module+0x16cc/0x1883
[<ffffffff8020a518>] system_call+0x68/0x6d
[<ffffffff8020a4b0>] system_call+0x0/0x6d
Code: 48 8b 40 18 48 8b b8 f0 01 00 00 e9 52 db ff ff 41 56 41 55
RIP [<ffffffff88019be9>] :usbcore:usb_kick_khubd+0x7/0x17
RSP <ffff8800eeb6fc50>
CR2: 0000000000000018
Killed
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next reply other threads:[~2009-01-23 6:45 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-23 6:45 Alexia Benington [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-11-19 17:26 (no subject) Razvan Cojocaru
2018-11-19 17:34 ` Razvan Cojocaru
2017-11-15 15:29 futurelieswithin
2017-08-25 5:16 Chao Gao
2017-07-28 5:27 Manonmani
2017-07-26 19:04 Raviprasad Gurikar
2017-04-04 11:29 Seraphime Kirkovski
2017-02-27 18:12 Dmitry Rockosov
2017-03-06 10:48 ` George Dunlap
2017-02-17 17:17 dhara buch
2017-02-20 17:56 ` Dario Faggioli
2017-02-17 10:47 Norbert Manthey
2017-02-17 11:35 ` Andrew Cooper
[not found] <1484304406-10820-2-git-send-email-nicolas.dichtel@6wind.com>
[not found] ` <3131144.4Ej3KFWRbz@wuerfel>
[not found] ` <1484304406-10820-1-git-send-email-nicolas.dichtel@6wind.com>
2017-01-13 15:36 ` David Howells
2017-01-13 15:43 ` David Howells
2016-12-29 0:56 Ronald Rojas
2017-01-04 1:10 ` Stefano Stabellini
2016-11-28 17:18 Ronald Rojas
2016-07-16 11:51 姚 å¿ å°†
2016-07-07 9:36 George Dunlap
2016-07-07 11:03 ` Dario Faggioli
2016-07-07 12:48 ` George Dunlap
2016-07-07 15:42 ` Dario Faggioli
2016-10-31 10:33 ` Ian Jackson
2016-05-19 14:34 Roger Pau Monné
2016-03-17 12:20 Safa Hamza
2016-03-18 11:34 ` Safa Hamza
2016-02-25 12:38 Ayushi Arora
2015-12-07 17:27 Ian Jackson
2015-08-05 13:27 [RFC PATCH v3.1 2/2] xsplice: Add hook for build_id Martin Pohlack
2015-08-05 14:06 ` (no subject) Martin Pohlack
2015-01-06 17:17 Konrad Rzeszutek Wilk
2014-12-19 9:53 Minalkumar Patel
2014-12-19 9:59 ` Ian Campbell
2014-02-13 23:47 Zir Blazer
2014-02-13 16:01 Simon Martin
2014-02-13 16:10 ` Andrew Cooper
2014-02-13 17:27 ` Don Slutz
2013-12-31 15:15 Konrad Rzeszutek Wilk
2013-12-17 18:35 Ian Jackson
2013-12-18 11:19 ` George Dunlap
2013-12-18 13:35 ` Ian Campbell
2014-01-07 13:55 ` Ian Campbell
2013-12-15 7:58 Adel Amani
2013-11-13 19:02 Jim Durand
2013-11-18 14:17 ` George Dunlap
2013-09-13 16:59 David Vrabel
2013-08-14 2:28 yvxiang
2013-08-14 2:31 ` yvxiang
2013-08-14 2:57 ` agya naila
2013-07-04 11:32 Tim Deegan
2013-06-28 16:10 ` [PATCH 08/10] xen: arm: add scope to dsb and dmb macros Ian Campbell
2013-07-04 11:44 ` (no subject) Tim Deegan
2013-06-26 11:42 Divya Kapil
2013-06-26 11:54 ` Ian Campbell
2013-06-16 13:45 wei.liu2
2013-05-14 15:11 Feng Tang
2013-05-03 8:48 Lars Kurth
2013-04-21 22:26 Lonnie Cumberland
[not found] <CAHyyzzTtK+LbxOh2r_X0=Zd2FsTxoAiLLaWahv5FY-QZnQxhLQ@mail.gmail.com>
[not found] ` <CAHyyzzSO0vY3LquDjXVAeV3U9sLnAY28+iADzsOLFkMGcJHLOQ@mail.gmail.com>
[not found] ` <CAHyyzzSDqmBNWmyRKFijei8YrJD5i40AJ9mcxxnme9CeCLZX2g@mail.gmail.com>
[not found] ` <CAHyyzzQcjzeWv-Z6SBOb8Ra0u6BOMzjKV3Ze482rMmMHkAMccw@mail.gmail.com>
[not found] ` <CAHyyzzQsh30y7-4M1xmJc+8p-EcqS0+jaibpTrXxTQi92iGDgw@mail.gmail.com>
2013-04-10 15:28 ` jacek burghardt
2013-04-10 6:57 Mina Jafari
2013-03-15 7:40 digvijay chauhan
2013-03-15 9:59 ` Ian Campbell
2013-03-15 11:18 ` Pasi Kärkkäinen
2013-01-08 21:51 Rushikesh Jadhav
2012-11-15 12:08 Tim Deegan
2012-11-15 23:04 ` Aravindh Puthiyaparambil
2013-04-22 21:56 ` Cutter 409
2013-04-23 8:49 ` Tim Deegan
2012-07-27 23:02 lmw
2012-07-14 4:16 张智
2012-07-19 10:24 ` Tim Deegan
2012-04-15 6:09 Lin Ming
2012-04-05 18:26 Francisco Rocha
2012-04-05 19:36 ` Wei Huang
2012-04-05 20:17 ` Francisco Rocha
2012-04-05 20:27 ` Wei Huang
2012-04-05 20:43 ` Francisco Rocha
2012-04-06 14:53 ` Francisco Rocha
2012-04-06 14:51 ` Wei Huang
2012-04-06 15:02 ` Francisco Rocha
2012-04-06 15:14 ` Konrad Rzeszutek Wilk
2012-04-06 16:09 ` Francisco Rocha
2012-02-24 18:54 Ian Jackson
2012-02-17 19:15 Ian Jackson
2011-10-17 7:40 Paolo Bonzini
2011-10-17 17:05 ` Konrad Rzeszutek Wilk
2011-10-17 21:02 ` Ian Campbell
2011-10-18 7:13 ` Paolo Bonzini
2011-10-06 13:11 Pratik shinde
2011-10-06 13:18 ` Andrew Cooper
2011-07-27 8:33 Grant McWilliams
2011-06-21 3:39 Attila Jecs
2011-06-21 13:20 ` Konrad Rzeszutek Wilk
2011-04-04 6:18 Novik, Alex
2011-03-20 22:27 Keshav Darak
2010-11-16 11:12 Ken Ash
2010-10-07 2:46 Mike Viau
2010-10-07 10:43 ` Stefano Stabellini
2010-10-07 13:43 ` George Shuklin
2010-10-07 14:21 ` Ian Campbell
2010-10-07 16:54 ` George Shuklin
2010-10-07 14:02 ` Ian Campbell
2010-04-16 10:59 Jiang, Yunhong
2009-10-09 21:47 Eads, Joshua Michael (S&T-Student)
2008-11-19 22:29 Bowen, Clair
2008-11-19 22:36 ` James Harper
2008-10-10 12:27 Swapna Shingre
2008-09-18 7:10 James Song
2007-06-11 10:35 Gautham Kampalapur Shankar, TLS, Chennai
2007-06-11 10:53 ` pradeep singh rautela
2006-10-09 11:55 Timo Benk
2006-07-17 14:44 Li, Xin B
2006-06-07 23:48 vineet chadha
2006-06-02 13:23 Kevin Tronkowski
2006-04-06 22:26 Nivedita Singhvi
2006-02-10 8:55 Li, Xin B
2005-11-19 22:44 Purav Saraiya
2005-10-02 2:59 Prashanth Radhakrishnan
2005-09-29 5:55 Li, Chengyuan
2005-09-23 19:07 Magenheimer, Dan (HP Labs Fort Collins)
2005-09-24 0:28 ` Christian Limpach
2005-09-21 20:49 Magenheimer, Dan (HP Labs Fort Collins)
2005-09-19 20:52 Magenheimer, Dan (HP Labs Fort Collins)
2005-09-19 21:18 ` Christian Limpach
2005-09-19 19:20 Magenheimer, Dan (HP Labs Fort Collins)
2005-09-19 19:58 ` Christian Limpach
2005-09-19 16:57 Magenheimer, Dan (HP Labs Fort Collins)
2005-09-19 16:49 Magenheimer, Dan (HP Labs Fort Collins)
2005-09-19 17:39 ` Christian Limpach
2005-09-19 15:29 Magenheimer, Dan (HP Labs Fort Collins)
2005-09-19 16:09 ` Christian Limpach
2005-09-19 13:43 Magenheimer, Dan (HP Labs Fort Collins)
2005-09-19 14:18 ` Christian Limpach
2005-09-19 14:30 ` Jerone Young
2005-09-19 15:34 ` Mark Williamson
2005-07-05 22:54 Igor Feoktistov
2005-06-26 3:26 Reiner Sailer
2005-04-28 4:11 田冠华
2005-04-28 4:10 田冠华
2005-04-18 16:43 tarawa1943
2005-04-18 17:07 ` Keir Fraser
2005-01-22 16:20 Ian Pratt
2005-01-21 17:38 Adam Heath
2005-01-21 17:35 Adam Heath
2004-12-31 15:43 M.A. Williamson
2004-08-20 12:09 James Harper
2004-04-19 7:27 Jan van Rensburg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7969168f0901222245o3a520f03wb513c30169006f0e@mail.gmail.com \
--to=alexbenington@gmail.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).