xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Manish Jaggi <mjaggi@caviumnetworks.com>
To: "xen-devel@lists.xenproject.org" <xen-devel@lists.xenproject.org>,
	Julien Grall <julien.grall@arm.com>,
	Andre Przywara <andre.przywara@arm.com>
Subject: [RFC v2] [PATCH] arm64-its: Add ITS support for ACPI dom0
Date: Thu, 8 Jun 2017 17:40:56 +0530	[thread overview]
Message-ID: <874e9db7-63bb-8cad-ed69-793d4f08f19d@caviumnetworks.com> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 6887 bytes --]

This patch supports ITS in hardware domain, supports ITS in Xen when 
booting with ACPI. Signed-off-by: Manish Jaggi <mjaggi@cavium.com> --- 
Changes since v1: - Moved its specific code to gic-v3-its.c - fixed 
macros xen/arch/arm/domain_build.c | 6 ++-- xen/arch/arm/gic-v3-its.c | 
75 +++++++++++++++++++++++++++++++++++++++- xen/arch/arm/gic-v3.c | 10 
++++-- xen/include/asm-arm/gic_v3_its.h | 6 ++++ 4 files changed, 91 
insertions(+), 6 deletions(-) diff --git a/xen/arch/arm/domain_build.c 
b/xen/arch/arm/domain_build.c index 3abacc0..d6d6c94 100644 --- 
a/xen/arch/arm/domain_build.c +++ b/xen/arch/arm/domain_build.c @@ -20,7 
+20,7 @@ #include <asm/psci.h> #include <asm/setup.h> #include 
<asm/cpufeature.h> - +#include <asm-arm/gic_v3_its.h> #include 
<asm/gic.h> #include <xen/irq.h> #include <xen/grant_table.h> @@ -1804,7 
+1804,9 @@ static int estimate_acpi_efi_size(struct domain *d, struct 
kernel_info *kinfo) madt_size = sizeof(struct acpi_table_madt) + 
sizeof(struct acpi_madt_generic_interrupt) * d->max_vcpus - + 
sizeof(struct acpi_madt_generic_distributor); + + sizeof(struct 
acpi_madt_generic_distributor) + + 
gicv3_its_madt_generic_translator_size(); + if ( d->arch.vgic.version == 
GIC_V3 ) madt_size += sizeof(struct acpi_madt_generic_redistributor) * 
d->arch.vgic.nr_regions; diff --git a/xen/arch/arm/gic-v3-its.c 
b/xen/arch/arm/gic-v3-its.c index 1fb06ca..937b970 100644 --- 
a/xen/arch/arm/gic-v3-its.c +++ b/xen/arch/arm/gic-v3-its.c @@ -25,14 
+25,18 @@ #include <xen/rbtree.h> #include <xen/sched.h> #include 
<xen/sizes.h> +#include <xen/iocap.h> #include <asm/gic.h> #include 
<asm/gic_v3_defs.h> #include <asm/gic_v3_its.h> #include <asm/io.h> 
#include <asm/page.h> +#include <xen/acpi.h> +#include <acpi/actables.h> 
+#include <xen/pfn.h> #define ITS_CMD_QUEUE_SZ SZ_1M - +#define 
ACPI_GICV3_ITS_MEM_SIZE (SZ_64K) /* * No lock here, as this list gets 
only populated upon boot while scanning * firmware tables for all host 
ITSes, and only gets iterated afterwards. @@ -920,6 +924,55 @@ int 
gicv3_lpi_change_vcpu(struct domain *d, paddr_t vdoorbell, return 0; } 
+int gicv3_its_deny_access(const struct domain *d) +{ + int rc = 0; + 
unsigned long mfn, nr; + const struct host_its *its_data; + + 
list_for_each_entry(its_data, &host_its_list, entry) + { + mfn = 
paddr_to_pfn(its_data->addr); + nr = PFN_UP(ACPI_GICV3_ITS_MEM_SIZE); + 
rc = iomem_deny_access(d, mfn, mfn + nr); + if ( rc ) + goto end; + } 
+end: + return rc; +} + +u32 
gicv3_its_madt_generic_translator_size(void) +{ + const struct host_its 
*its_data; + u32 size = 0; + + list_for_each_entry(its_data, 
&host_its_list, entry) + { + size += sizeof(struct 
acpi_madt_generic_translator); + } + return size; +} + +u32 
gicv3_its_make_hwdom_madt(u8 *base_ptr, u32 offset) +{ + struct 
acpi_madt_generic_translator *gic_its; + const struct host_its 
*its_data; + u32 table_len = offset, size; + + /* Update GIC ITS 
information in hardware domain's MADT */ + list_for_each_entry(its_data, 
&host_its_list, entry) + { + size = sizeof(struct 
acpi_madt_generic_translator); + gic_its = (struct 
acpi_madt_generic_translator *)(base_ptr + table_len); + 
gic_its->header.type = ACPI_MADT_TYPE_GENERIC_TRANSLATOR; + 
gic_its->header.length = size; + gic_its->base_address = its_data->addr; 
+ table_len += size; + } + return table_len; +} + /* * Create the 
respective guest DT nodes from a list of host ITSes. * This copies the 
reg property, so the guest sees the ITS at the same address @@ -992,6 
+1045,26 @@ int gicv3_its_make_hwdom_dt_nodes(const struct domain *d, 
return res; } +int gicv3_its_acpi_init(struct acpi_subtable_header 
*header, const unsigned long end) +{ + struct 
acpi_madt_generic_translator *its_entry; + struct host_its *its_data; + 
+ its_data = xzalloc(struct host_its); + if (!its_data) + return -1; + + 
its_entry = (struct acpi_madt_generic_translator *)header; + 
its_data->addr = its_entry->base_address; + its_data->size = 
ACPI_GICV3_ITS_MEM_SIZE; + + spin_lock_init(&its_data->cmd_lock); + + 
printk("GICv3: Found ITS @0x%lx\n", its_data->addr); + + 
list_add_tail(&its_data->entry, &host_its_list); + return 0; +} /* Scan 
the DT for any ITS nodes and create a list of host ITSes out of it. */ 
void gicv3_its_dt_init(const struct dt_device_node *node) { diff --git 
a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c index c927306..f0f6d12 
100644 --- a/xen/arch/arm/gic-v3.c +++ b/xen/arch/arm/gic-v3.c @@ 
-1333,9 +1333,8 @@ static int gicv3_iomem_deny_access(const struct 
domain *d) return iomem_deny_access(d, mfn, mfn + nr); } - return 0; + 
return gicv3_its_deny_access(d); } - #ifdef CONFIG_ACPI static void 
__init gic_acpi_add_rdist_region(paddr_t base, paddr_t size, bool 
single_rdist) @@ -1374,6 +1373,7 @@ static int 
gicv3_make_hwdom_madt(const struct domain *d, u32 offset) for ( i = 0; i 
< d->max_vcpus; i++ ) { gicc = (struct acpi_madt_generic_interrupt 
*)(base_ptr + table_len); + ACPI_MEMCPY(gicc, host_gicc, size); 
gicc->cpu_interface_number = i; gicc->uid = i; @@ -1399,7 +1399,7 @@ 
static int gicv3_make_hwdom_madt(const struct domain *d, u32 offset) 
gicr->length = d->arch.vgic.rdist_regions[i].size; table_len += size; } 
- + table_len = gicv3_its_make_hwdom_madt(base_ptr, table_len); return 
table_len; } @@ -1567,6 +1567,9 @@ static void __init 
gicv3_acpi_init(void) gicv3.rdist_stride = 0; + 
acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR, + 
gicv3_its_acpi_init, 0); + /* * In ACPI, 0 is considered as the invalid 
address. However the rest * of the initialization rely on the invalid 
address to be @@ -1585,6 +1588,7 @@ static void __init 
gicv3_acpi_init(void) else vsize = GUEST_GICC_SIZE; + } #else static 
void __init gicv3_acpi_init(void) { } diff --git 
a/xen/include/asm-arm/gic_v3_its.h b/xen/include/asm-arm/gic_v3_its.h 
index d2a3e53..b72aec2 100644 --- a/xen/include/asm-arm/gic_v3_its.h +++ 
b/xen/include/asm-arm/gic_v3_its.h @@ -105,6 +105,7 @@ #include 
<xen/device_tree.h> #include <xen/rbtree.h> +#include <xen/acpi.h> 
#define HOST_ITS_FLUSH_CMD_QUEUE (1U << 0) #define HOST_ITS_USES_PTA (1U 
<< 1) @@ -134,6 +135,7 @@ extern struct list_head host_its_list; /* 
Parse the host DT and pick up all host ITSes. */ void 
gicv3_its_dt_init(const struct dt_device_node *node); +int 
gicv3_its_acpi_init(struct acpi_subtable_header *header, const unsigned 
long end); bool gicv3_its_host_has_its(void); @@ -167,6 +169,10 @@ int 
gicv3_its_make_hwdom_dt_nodes(const struct domain *d, const struct 
dt_device_node *gic, void *fdt); +u32 gicv3_its_make_hwdom_madt(u8 
*base_ptr, u32 offset); +u32 
gicv3_its_madt_generic_translator_size(void); +/* Deny iomem access for 
its */ +int gicv3_its_deny_access(const struct domain *d); /* * Map a 
device on the host by allocating an ITT on the host (ITS). * "nr_event" 
specifies how many events (interrupts) this device will need. -- 2.7.4


[-- Attachment #1.2: Type: text/html, Size: 8003 bytes --]

[-- Attachment #2: Type: text/plain, Size: 127 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

             reply	other threads:[~2017-06-08 12:11 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-08 12:10 Manish Jaggi [this message]
2017-06-08 12:44 ` [RFC v2] [PATCH] arm64-its: Add ITS support for ACPI dom0 Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=874e9db7-63bb-8cad-ed69-793d4f08f19d@caviumnetworks.com \
    --to=mjaggi@caviumnetworks.com \
    --cc=andre.przywara@arm.com \
    --cc=julien.grall@arm.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).