[PATCH 7/8] x86/EFI: keep debug info in xen.efi

[Jan Beulich <jbeulich@suse.com>]

... provided the linker supports it (which it does as of commit
2dfa8341e079 ["ELF DWARF in PE output"]).

Without mentioning debugging sections, the linker would put them at
VA 0, thus making them unreachable by 32-bit (relative or absolute)
relocations. If relocations were resolvable (or absent) the resulting
binary would have invalid section RVAs (0 - __image_base__, truncated to
32 bits). Mentioning debugging sections without specifying an address
will result in the linker putting them all on the same RVA. A loader is,
afaict, free to reject loading such an image, as sections shouldn't
overlap. (The above describes GNU ld 2.36 behavior, which - if deemed
buggy - could change.)

Make sure our up-to-16Mb padding doesn't unnecessarily further extend
the image.

Take the opportunity and also switch to using $(call ld-option,...).

Requested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
This way we could also avoid discarding .comment for xen.efi.

I'd like to point out that the linking of the debug info takes far
longer than the linking of the "normal" parts of the image. The change
therefore has the downside of slowing down debug builds.

--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -126,8 +126,14 @@ export XEN_BUILD_EFI := $(shell $(CC) $(
 CFLAGS-$(XEN_BUILD_EFI) += -DXEN_BUILD_EFI
 
 # Check if the linker supports PE.
-EFI_LDFLAGS = $(patsubst -m%,-mi386pep,$(XEN_LDFLAGS)) --subsystem=10 --strip-debug
-XEN_BUILD_PE := $(if $(XEN_BUILD_EFI),$(shell $(LD) $(EFI_LDFLAGS) -o efi/check.efi efi/check.o 2>/dev/null && echo y))
+EFI_LDFLAGS = $(patsubst -m%,-mi386pep,$(XEN_LDFLAGS)) --subsystem=10
+XEN_BUILD_PE := $(if $(XEN_BUILD_EFI),$(call ld-option,$(EFI_LDFLAGS) --image-base=0x100000000 -o efi/check.efi efi/check.o))
+# If the above failed, it may be merely because of the linker not dealing well
+# with debug info. Try again with stripping it.
+ifeq ($(CONFIG_DEBUG_INFO)-$(XEN_BUILD_PE),y-n)
+EFI_LDFLAGS += --strip-debug
+XEN_BUILD_PE := $(call ld-option,$(EFI_LDFLAGS) --image-base=0x100000000 -o efi/check.efi efi/check.o)
+endif
 
 ifeq ($(XEN_BUILD_PE),y)
 
@@ -232,6 +238,9 @@ note_file_option ?= $(note_file)
 
 ifeq ($(XEN_BUILD_PE),y)
 $(TARGET).efi: prelink.o $(note_file) efi.lds efi/relocs-dummy.o efi/mkreloc
+ifeq ($(CONFIG_DEBUG_INFO),y)
+	$(if $(filter --strip-debug,$(EFI_LDFLAGS)),echo,:) "Will strip debug info from $(@F)"
+endif
 	$(foreach base, $(VIRT_BASE) $(ALT_BASE), \
 	          $(LD) $(call EFI_LDFLAGS,$(base)) -T efi.lds -N $< $(relocs-dummy) \
 	                $(BASEDIR)/common/symbols-dummy.o $(note_file_option) -o $(@D)/.$(@F).$(base).0 &&) :
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -312,10 +312,60 @@ SECTIONS
     *(.reloc)
     __base_relocs_end = .;
   }
-  /* Trick the linker into setting the image size to exactly 16Mb. */
-  . = ALIGN(__section_alignment__);
-  DECL_SECTION(.pad) {
-    . = ALIGN(MB(16));
+  .debug_abbrev ALIGN(1) (NOLOAD) : {
+     *(.debug_abbrev)
+  }
+  .debug_info ALIGN(1) (NOLOAD) : {
+    *(.debug_info)
+    *(.gnu.linkonce.wi.*)
+  }
+  .debug_types ALIGN(1) (NOLOAD) : {
+    *(.debug_types)
+  }
+  .debug_str ALIGN(1) (NOLOAD) : {
+    *(.debug_str)
+  }
+  .debug_line ALIGN(1) (NOLOAD) : {
+    *(.debug_line)
+    *(.debug_line.*)
+  }
+  .debug_line_str ALIGN(1) (NOLOAD) : {
+    *(.debug_line_str)
+  }
+  .debug_names ALIGN(4) (NOLOAD) : {
+    *(.debug_names)
+  }
+  .debug_frame ALIGN(4) (NOLOAD) : {
+    *(.debug_frame)
+  }
+  .debug_loc ALIGN(1) (NOLOAD) : {
+    *(.debug_loc)
+  }
+  .debug_loclists ALIGN(4) (NOLOAD) : {
+    *(.debug_loclists)
+  }
+  .debug_ranges ALIGN(8) (NOLOAD) : {
+    *(.debug_ranges)
+  }
+  .debug_rnglists ALIGN(4) (NOLOAD) : {
+    *(.debug_rnglists)
+  }
+  .debug_addr ALIGN(8) (NOLOAD) : {
+    *(.debug_addr)
+  }
+  .debug_aranges ALIGN(1) (NOLOAD) : {
+    *(.debug_aranges)
+  }
+  .debug_pubnames ALIGN(1) (NOLOAD) : {
+    *(.debug_pubnames)
+  }
+  .debug_pubtypes ALIGN(1) (NOLOAD) : {
+    *(.debug_pubtypes)
+  }
+  /* Trick the linker into setting the image size to no less than 16Mb. */
+  __image_end__ = .;
+  .pad ALIGN(__section_alignment__) : {
+    . = __image_end__ < __image_base__ + MB(16) ? ALIGN(MB(16)) : .;
   }
 #elif defined(XEN_BUILD_EFI)
   /*