Hi All

On XEN-4.16 with Ubuntu 22.04 Dom0 and HVM-DomU, I tried to do a USB mass
storage device passthrough to DomU.
I followed the PVUSB method mentioned in
https://wiki.xenproject.org/wiki/Xen_USB_Passthrough.

I am able to do passthrough for USB 2.0 and 3.x version 32/64 GB mass
storage devices to DomU.
Passthrough failed for "SanDisk 250GB SSD USB-C, USB 3.1" with below error.
Able to access the SSD in Dom0.
Can someone help with what could be missing here.

*Commands used:*
host$ sudo xl usbctrl-attach vm1 version=3 ports=6
host$ sudo xl usbdev-attach vm1 hostbus=3 hostaddr=2

*Error Log in DomU*
VM1:~$ sudo dmesg
[  152.841566] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[  152.867164] usb 2-1: New USB device found, idVendor=0781,
idProduct=558c, bcdDevice=10.12
[  152.867173] usb 2-1: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[  152.867177] usb 2-1: Product: Extreme SSD
[  152.867179] usb 2-1: Manufacturer: SanDisk
[  152.867182] usb 2-1: SerialNumber: 31393430475A343030363932
[  152.899103] *usb 2-1: USB controller 0000:00:04.0 does not support
streams, which are required by the UAS driver.*
[  152.899110] usb 2-1: Please try an other USB controller if you wish to
use UAS.
[  152.899113] usb-storage 2-1:1.0: USB Mass Storage device detected
[  152.902033] scsi host2: usb-storage 2-1:1.0
[  152.902174] usbcore: registered new interface driver usb-storage
[  152.908928] usbcore: registered new interface driver uas
[  174.933399] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd

Thanks
Sudheer