From: Roman Shaposhnik <roman@zededa.com>
To: xen-devel@lists.xenproject.org
Cc: jgross@suse.com, andrew.cooper3@citrix.com,
boris.ostrovsky@oracle.com, paul.durrant@citrix.com,
jbeulich@suse.com
Subject: Re: [Xen-devel] [BUG] After upgrade to Xen 4.12.0 iommu=no-igfx
Date: Fri, 19 Jul 2019 13:02:12 -0700 [thread overview]
Message-ID: <CAMmSBy8CcG08-+-F6fvwmH1oEKpsV8OGEco94g04dZcyyFWKbw@mail.gmail.com> (raw)
In-Reply-To: <CAMmSBy9g-QFHTXhpHK6=xDFiBDj4LpnJ=cXj405MMmA1rJaOUg@mail.gmail.com>
CCing relevant maintainers as well (sorry for not doing it first time around)
On Fri, Jul 19, 2019 at 12:31 PM Roman Shaposhnik <roman@zededa.com> wrote:
>
> Hi!
>
> we're using Xen on Advantech ARK-2250 Embedded Box PC:
> https://www.elmark.com.pl/web/uploaded/karty_produktow/advantech/ark-2250l/ark-2250l_instrukcja-uzytkownika.pdf
>
> After upgrading to Xen 4.12.0 from 4.11.0 we now have to utilize iommu=no-igfx
> workaround as per:
> https://xenbits.xen.org/docs/unstable/misc/xen-command-line.html#iommu
>
> Without the workaround the screen appears to be garbled with colored
> static noise and the following message keeps showing up:
> (XEN) printk: 26235 messages suppressed.
> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> 8e43c000, iommu reg = ffff82c00021d000
> (XEN) printk: 26303 messages suppressed.
> (XEN) [VT-D]DMAR:[DMA Read] Request device [0000:00:02.0] fault addr
> 8e2c6000, iommu reg = ffff82c00021d000
>
> Once iommu=no-igfx is applied the box can boot fine.
>
> At the end of this email, you can see a full log of the box booting
> all the way into Dom0 with iommu=no-igfx applied. I am also attaching
> similar log without no-igfx
>
> Please let me know if you need any more information to help us diagnose this.
>
> Thanks,
> Roman.
>
> 0x0000:0x00:0x02.0x0: ROM: 0x10000 bytes at 0x8968d018
> 0x0000:0x02:0x00.0x0: ROM: 0x10000 bytes at 0x89640018
> 0x0000:0x00:0x1f.0x6: ROM: 0x10c00 bytes at 0x8962f018
> Xen 4.12.0
> (XEN) Xen version 4.12.0 (@) (gcc (Alpine 6.4.0) 6.4.0) debug=n Mon
> Jun 17 18:50:07 UTC 2019
> (XEN) Latest ChangeSet:
> (XEN) Bootloader: GRUB 2.03
> (XEN) Command line: iommu=no-igfx com1=115200,8n1 console=com1,vga
> dom0_mem=1024M,max:1024M dom0_max_vcpus=1 dom0_vcpus_pin smt=false
> (XEN) Xen image load base address: 0x88600000
> (XEN) Video information:
> (XEN) VGA is graphics mode 1680x1050, 32 bpp
> (XEN) Disc information:
> (XEN) Found 0 MBR signatures
> (XEN) Found 1 EDD information structures
> (XEN) EFI RAM map:
> (XEN) 0000000000000000 - 0000000000058000 (usable)
> (XEN) 0000000000058000 - 0000000000059000 (reserved)
> (XEN) 0000000000059000 - 000000000009f000 (usable)
> (XEN) 000000000009f000 - 00000000000a0000 (reserved)
> (XEN) 0000000000100000 - 000000008648a000 (usable)
> (XEN) 000000008648a000 - 000000008648b000 (ACPI NVS)
> (XEN) 000000008648b000 - 00000000864b5000 (reserved)
> (XEN) 00000000864b5000 - 000000008c224000 (usable)
> (XEN) 000000008c224000 - 000000008c528000 (reserved)
> (XEN) 000000008c528000 - 000000008c736000 (usable)
> (XEN) 000000008c736000 - 000000008cea7000 (ACPI NVS)
> (XEN) 000000008cea7000 - 000000008d2ff000 (reserved)
> (XEN) 000000008d2ff000 - 000000008d300000 (usable)
> (XEN) 000000008d300000 - 000000008d400000 (reserved)
> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
> (XEN) 00000000fe000000 - 00000000fe011000 (reserved)
> (XEN) 00000000fec00000 - 00000000fec01000 (reserved)
> (XEN) 00000000fee00000 - 00000000fee01000 (reserved)
> (XEN) 00000000ff000000 - 0000000100000000 (reserved)
> (XEN) 0000000100000000 - 000000016e000000 (usable)
> (XEN) ACPI: RSDP 8CE49000, 0024 (r2 ALASKA)
> (XEN) ACPI: XSDT 8CE490A8, 00CC (r1 ALASKA A M I 1072009 AMI 10013)
> (XEN) ACPI: FACP 8CE6C370, 010C (r5 ALASKA A M I 1072009 AMI 10013)
> (XEN) ACPI: DSDT 8CE49208, 23167 (r2 ALASKA A M I 1072009 INTL 20120913)
> (XEN) ACPI: FACS 8CE8EF80, 0040
> (XEN) ACPI: APIC 8CE6C480, 0084 (r3 ALASKA A M I 1072009 AMI 10013)
> (XEN) ACPI: FPDT 8CE6C508, 0044 (r1 ALASKA A M I 1072009 AMI 10013)
> (XEN) ACPI: FIDT 8CE6C550, 009C (r1 ALASKA A M I 1072009 AMI 10013)
> (XEN) ACPI: MCFG 8CE6C5F0, 003C (r1 ALASKA A M I 1072009 MSFT 97)
> (XEN) ACPI: HPET 8CE6C630, 0038 (r1 ALASKA A M I 1072009 AMI. 5000B)
> (XEN) ACPI: LPIT 8CE6C668, 0094 (r1 INTEL SKL-ULT 0 MSFT 5F)
> (XEN) ACPI: SSDT 8CE6C700, 0248 (r2 INTEL sensrhub 0 INTL 20120913)
> (XEN) ACPI: SSDT 8CE6C948, 2BAE (r2 INTEL PtidDevc 1000 INTL 20120913)
> (XEN) ACPI: SSDT 8CE6F4F8, 0BE3 (r2 INTEL Ther_Rvp 1000 INTL 20120913)
> (XEN) ACPI: SSDT 8CE700E0, 04A3 (r2 INTEL zpodd 1000 INTL 20120913)
> (XEN) ACPI: DBGP 8CE70588, 0034 (r1 INTEL 0 MSFT 5F)
> (XEN) ACPI: DBG2 8CE705C0, 0054 (r0 INTEL 0 MSFT 5F)
> (XEN) ACPI: SSDT 8CE70618, 06E9 (r2 INTEL xh_rvp07 0 INTL 20120913)
> (XEN) ACPI: SSDT 8CE70D08, 547E (r2 SaSsdt SaSsdt 3000 INTL 20120913)
> (XEN) ACPI: UEFI 8CE76188, 0042 (r1 0 0)
> (XEN) ACPI: SSDT 8CE761D0, 0E73 (r2 CpuRef CpuSsdt 3000 INTL 20120913)
> (XEN) ACPI: BGRT 8CE77048, 0038 (r1 ALASKA A M I 1072009 AMI 10013)
> (XEN) ACPI: DMAR 8CE77080, 00A8 (r1 INTEL SKL 1 INTL 1)
> (XEN) ACPI: TPM2 8CE77128, 0034 (r3 Tpm2Tabl 1 AMI 0)
> (XEN) ACPI: ASF! 8CE77160, 00A5 (r32 INTEL HCG 1 TFSM F4240)
> (XEN) System RAM: 4003MB (4099736kB)
> (XEN) Domain heap initialised
> (XEN) ACPI: 32/64X FACS address mismatch in FADT -
> 8ce8ef80/0000000000000000, using 32
> (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) [VT-D] RMRR address range 8d800000..8fffffff not in reserved
> memory; need "iommu_inclusive_mapping=1"?
> (XEN) Switched to APIC driver x2apic_cluster.
> (XEN) xstate: size: 0x440 and states: 0x1f
> (XEN) Speculative mitigation facilities:
> (XEN) Hardware features:
> (XEN) Compiled-in support: SHADOW_PAGING
> (XEN) Xen settings: BTI-Thunk N/A, SPEC_CTRL: No, Other:
> (XEN) L1TF: believed vulnerable, maxphysaddr L1D 46, CPUID 39, Safe
> address 8000000000
> (XEN) Support for HVM VMs: RSB EAGER_FPU
> (XEN) Support for PV VMs: RSB EAGER_FPU
> (XEN) XPTI (64-bit PV only): Dom0 enabled, DomU enabled (with PCID)
> (XEN) PV L1TF shadowing: Dom0 disabled, DomU enabled
> (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
> (XEN) Initializing Credit2 scheduler
> (XEN) Platform timer is 23.999MHz HPET
> (XEN) Detected 2496.011 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) Intel VT-d iommu 0 supported page sizes: 4kB, 2MB, 1GB.
> (XEN) Intel VT-d iommu 1 supported page sizes: 4kB, 2MB, 1GB.
> (XEN) Intel VT-d Snoop Control not enabled.
> (XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
> (XEN) Intel VT-d Queued Invalidation enabled.
> (XEN) Intel VT-d Interrupt Remapping enabled.
> (XEN) Intel VT-d Posted Interrupt not enabled.
> (XEN) Intel VT-d Shared EPT tables enabled.
> (XEN) I/O virtualisation enabled
> (XEN) - Dom0 mode: Relaxed
> (XEN) Interrupt remapping enabled
> (XEN) Enabled directed EOI with ioapic_ack_old on!
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using old ACK method
> (XEN) TSC_DEADLINE disabled due to Errata; please update microcode to
> version 0xb2 (or later)
> (XEN) Allocated console ring of 16 KiB.
> (XEN) mwait-idle: max C-state count of 8 reached
> (XEN) VMX: Supported advanced features:
> (XEN) - APIC MMIO access virtualisation
> (XEN) - APIC TPR shadow
> (XEN) - Extended Page Tables (EPT)
> (XEN) - Virtual-Processor Identifiers (VPID)
> (XEN) - Virtual NMI
> (XEN) - MSR direct-access bitmap
> (XEN) - Unrestricted Guest
> (XEN) - VMCS shadowing
> (XEN) - VM Functions
> (XEN) - Virtualisation Exceptions
> (XEN) - Page Modification Logging
> (XEN) HVM: ASIDs enabled.
> (XEN) HVM: VMX enabled
> (XEN) HVM: Hardware Assisted Paging (HAP) detected
> (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
> (XEN) mwait-idle: max C-state count of 8 reached
> (XEN) mwait-idle: max C-state count of 8 reached
> (XEN) mwait-idle: max C-state count of 8 reached
> (XEN) Brought up 2 CPUs
> (XEN) Dom0 has maximum 312 PIRQs
> (XEN) Xen kernel: 64-bit, lsb, compat32
> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2a2c000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 0000000164000000->0000000168000000 (245760 pages
> to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: ffffffff81000000->ffffffff82a2c000
> (XEN) Init. ramdisk: 0000000000000000->0000000000000000
> (XEN) Phys-Mach map: 0000008000000000->0000008000200000
> (XEN) Start info: ffffffff82a2c000->ffffffff82a2c4b4
> (XEN) Xenstore ring: 0000000000000000->0000000000000000
> (XEN) Console ring: 0000000000000000->0000000000000000
> (XEN) Page tables: ffffffff82a2d000->ffffffff82a46000
> (XEN) Boot stack: ffffffff82a46000->ffffffff82a47000
> (XEN) TOTAL: ffffffff80000000->ffffffff82c00000
> (XEN) ENTRY ADDRESS: ffffffff826aa180
> (XEN) Dom0 has maximum 1 VCPUs
> (XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
> (XEN) Initial low memory virq threshold set at 0x4000 pages.
> (XEN) Scrubbing Free RAM in background
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
> (XEN) Freed 480kB init memory
> mapping kernel into physical memory
> about to get started...
> [ 0.000000] Linux version 4.19.5-linuxkit (root@48efbd0309a6) (gcc
> version 6.3.0 (Alpine 6.3.0)) #1 SMP Mon Jun 17 17:43:29 UTC 2019
> [ 0.000000] Command line: console=hvc0 earlyprintk=xen rootdelay=3
> root=PARTUUID=61ff5ba4-aea3-4c21-a11c-b899a6a88def text
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
> point registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
> [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is
> 832 bytes, using 'standard' format.
> [ 0.000000] Released 0 page(s)
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000057fff] usable
> [ 0.000000] Xen: [mem 0x0000000000058000-0x0000000000058fff] reserved
> [ 0.000000] Xen: [mem 0x0000000000059000-0x000000000009efff] usable
> [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved
> [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000040061fff] usable
> [ 0.000000] Xen: [mem 0x0000000040062000-0x0000000086489fff] unusable
> [ 0.000000] Xen: [mem 0x000000008648a000-0x000000008648afff] ACPI NVS
> [ 0.000000] Xen: [mem 0x000000008648b000-0x00000000864b4fff] reserved
> [ 0.000000] Xen: [mem 0x00000000864b5000-0x000000008c223fff] unusable
> [ 0.000000] Xen: [mem 0x000000008c224000-0x000000008c527fff] reserved
> [ 0.000000] Xen: [mem 0x000000008c528000-0x000000008c735fff] unusable
> [ 0.000000] Xen: [mem 0x000000008c736000-0x000000008cea6fff] ACPI NVS
> [ 0.000000] Xen: [mem 0x000000008cea7000-0x000000008d2fefff] reserved
> [ 0.000000] Xen: [mem 0x000000008d2ff000-0x000000008d2fffff] unusable
> [ 0.000000] Xen: [mem 0x000000008d300000-0x000000008d3fffff] reserved
> [ 0.000000] Xen: [mem 0x00000000e0000000-0x00000000efffffff] reserved
> [ 0.000000] Xen: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
> [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
> [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
> [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
> [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
> [ 0.000000] Xen: [mem 0x0000000100000000-0x000000016dffffff] unusable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] efi: EFI v2.40 by American Megatrends
> [ 0.000000] efi: ESRT=0x8d29c098 ACPI=0x8ce49000 ACPI
> 2.0=0x8ce49000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 MPS=0xfc9c0
> [ 0.000000] SMBIOS 3.0.0 present.
> [ 0.000000] DMI: /, BIOS 5.11 06/12/2017
> [ 0.000000] Hypervisor detected: Xen PV
> [ 0.000689] tsc: Detected 2496.010 MHz processor
> [ 0.010540] last_pfn = 0x40062 max_arch_pfn = 0x400000000
> [ 0.010541] Disabled
> [ 0.010543] x86/PAT: MTRRs disabled, skipping PAT initialization too.
> [ 0.010546] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
> [ 0.010576] Kernel/User page tables isolation: disabled on XEN PV.
> [ 0.176019] Secure boot disabled
> [ 0.176033] ACPI: Early table checksum verification disabled
> [ 0.176039] ACPI: RSDP 0x000000008CE49000 000024 (v02 ALASKA)
> [ 0.176048] ACPI: XSDT 0x000000008CE490A8 0000CC (v01 ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.176078] ACPI: FACP 0x000000008CE6C370 00010C (v05 ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.176134] ACPI: DSDT 0x000000008CE49208 023167 (v02 ALASKA A M I
> 01072009 INTL 20120913)
> [ 0.176145] ACPI: FACS 0x000000008CE8EF80 000040
> [ 0.176157] ACPI: APIC 0x000000008CE6C480 000084 (v03 ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.176168] ACPI: FPDT 0x000000008CE6C508 000044 (v01 ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.176180] ACPI: FIDT 0x000000008CE6C550 00009C (v01 ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.176191] ACPI: MCFG 0x000000008CE6C5F0 00003C (v01 ALASKA A M I
> 01072009 MSFT 00000097)
> [ 0.176203] ACPI: HPET 0x000000008CE6C630 000038 (v01 ALASKA A M I
> 01072009 AMI. 0005000B)
> [ 0.176214] ACPI: LPIT 0x000000008CE6C668 000094 (v01 INTEL
> SKL-ULT 00000000 MSFT 0000005F)
> [ 0.176226] ACPI: SSDT 0x000000008CE6C700 000248 (v02 INTEL
> sensrhub 00000000 INTL 20120913)
> [ 0.176245] ACPI: SSDT 0x000000008CE6C948 002BAE (v02 INTEL
> PtidDevc 00001000 INTL 20120913)
> [ 0.176257] ACPI: SSDT 0x000000008CE6F4F8 000BE3 (v02 INTEL
> Ther_Rvp 00001000 INTL 20120913)
> [ 0.176268] ACPI: SSDT 0x000000008CE700E0 0004A3 (v02 INTEL zpodd
> 00001000 INTL 20120913)
> [ 0.176280] ACPI: DBGP 0x000000008CE70588 000034 (v01 INTEL
> 00000000 MSFT 0000005F)
> [ 0.176291] ACPI: DBG2 0x000000008CE705C0 000054 (v00 INTEL
> 00000000 MSFT 0000005F)
> [ 0.176303] ACPI: SSDT 0x000000008CE70618 0006E9 (v02 INTEL
> xh_rvp07 00000000 INTL 20120913)
> [ 0.176315] ACPI: SSDT 0x000000008CE70D08 00547E (v02 SaSsdt SaSsdt
> 00003000 INTL 20120913)
> [ 0.176327] ACPI: UEFI 0x000000008CE76188 000042 (v01
> 00000000 00000000)
> [ 0.176338] ACPI: SSDT 0x000000008CE761D0 000E73 (v02 CpuRef
> CpuSsdt 00003000 INTL 20120913)
> [ 0.176350] ACPI: BGRT 0x000000008CE77048 000038 (v01 ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.176362] ACPI: RMAD 0x000000008CE77080 0000A8 (v01 INTEL SKL
> 00000001 INTL 00000001)
> [ 0.176374] ACPI: TPM2 0x000000008CE77128 000034 (v03
> Tpm2Tabl 00000001 AMI 00000000)
> [ 0.176385] ACPI: ASF! 0x000000008CE77160 0000A5 (v32 INTEL HCG
> 00000001 TFSM 000F4240)
> [ 0.176416] Setting APIC routing to Xen PV.
> [ 0.179941] Zone ranges:
> [ 0.179943] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.179945] DMA32 [mem 0x0000000001000000-0x0000000040061fff]
> [ 0.179947] Normal empty
> [ 0.179948] Movable zone start for each node
> [ 0.179949] Early memory node ranges
> [ 0.179951] node 0: [mem 0x0000000000001000-0x0000000000057fff]
> [ 0.179952] node 0: [mem 0x0000000000059000-0x000000000009efff]
> [ 0.179954] node 0: [mem 0x0000000000100000-0x0000000040061fff]
> [ 0.180528] Reserved but unavailable: 32769 pages
> [ 0.180530] Initmem setup node 0 [mem 0x0000000000001000-0x0000000040061fff]
> [ 0.185470] p2m virtual area at (____ptrval____), size is 40000000
> [ 0.285486] Remapped 98 page(s)
> [ 0.285528] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
> [ 0.285848] ACPI: PM-Timer IO Port: 0x1808
> [ 0.285881] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.285883] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> [ 0.285885] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> [ 0.285887] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> [ 0.285929] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
> [ 0.285938] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.285941] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.285954] Using ACPI (MADT) for SMP configuration information
> [ 0.285958] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [ 0.285980] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.286001] [mem 0x90000000-0xdfffffff] available for PCI devices
> [ 0.286005] Booting paravirtualized kernel on Xen
> [ 0.286006] Xen version: 4.12.0 (preserve-AD)
> [ 0.286009] clocksource: refined-jiffies: mask: 0xffffffff
> max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> [ 0.400398] random: get_random_bytes called from
> start_kernel+0x92/0x4be with crng_init=0
> [ 0.400407] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128
> nr_cpu_ids:4 nr_node_ids:1
> [ 0.400651] percpu: Embedded 45 pages/cpu @(____ptrval____) s143768
> r8192 d32360 u524288
> [ 0.400710] Built 1 zonelists, mobility grouping on. Total pages: 258024
> [ 0.400722] Kernel command line: console=hvc0 earlyprintk=xen
> rootdelay=3 root=PARTUUID=61ff5ba4-aea3-4c21-a11c-b899a6a88def text
> [ 0.400935] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.400976] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.401125] x2apic disabled
> [ 0.430609] software IO TLB: mapped [mem 0x3a600000-0x3e600000] (64MB)
> [ 0.441378] Memory: 930940K/1048572K available (12300K kernel code,
> 1595K rwdata, 3068K rodata, 1584K init, 1952K bss, 117632K reserved,
> 0K cma-reserved)
> [ 0.441440] ftrace: allocating 43497 entries in 170 pages
> [ 0.458530] rcu: Hierarchical RCU implementation.
> [ 0.458533] rcu: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
> [ 0.458534] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
> [ 0.461631] Using NULL legacy PIC
> [ 0.461633] NR_IRQS: 8448, nr_irqs: 256, preallocated irqs: 0
> [ 0.461649] xen:events: Using FIFO-based ABI
> [ 0.461818] Console: colour dummy device 80x25
> [ 0.461995] console [tty0] enabled
> [ 0.462487] console [hvc0] enabled
> [ 0.462494] ACPI: Core revision 20180810
> [ 0.477623] ACPI BIOS Warning (bug): Incorrect checksum in table
> [BGRT] - 0x99, should be 0xAF (20180810/tbprint-177)
> [ 0.477695] clocksource: xen: mask: 0xffffffffffffffff max_cycles:
> 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
> [ 0.477716] installing Xen timer for CPU 0
> [ 0.477801] clocksource: tsc-early: mask: 0xffffffffffffffff
> max_cycles: 0x23fa80a809f, max_idle_ns: 440795273818 ns
> [ 0.477865] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 4992.02 BogoMIPS (lpj=24960100)
> [ 0.477874] pid_max: default: 32768 minimum: 301
> [ 0.477951] Security Framework initialized
> [ 0.477956] Yama: becoming mindful.
> [ 0.477981] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
> [ 0.477990] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
> [ 0.478256] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
> [ 0.478262] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
> [ 0.478268] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
> [ 0.478273] Spectre V2 : Spectre v2 / SpectreRSB mitigation:
> Filling RSB on context switch
> [ 0.478279] Speculative Store Bypass: Vulnerable
> [ 0.527925] Freeing SMP alternatives memory: 24K
> [ 0.529303] VPMU disabled by hypervisor.
> [ 0.529471] Performance Events: unsupported p6 CPU model 78 no PMU
> driver, software events only.
> [ 0.529545] rcu: Hierarchical SRCU implementation.
> [ 0.529706] NMI watchdog: Perf NMI watchdog permanently disabled
> [ 0.529768] smp: Bringing up secondary CPUs ...
> [ 0.529773] smp: Brought up 1 node, 1 CPU
> [ 0.529777] smpboot: Max logical packages: 1
> [ 0.529942] devtmpfs: initialized
> [ 0.529996] x86/mm: Memory block size: 128MB
> [ 0.530398] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 19112604462750000 ns
> [ 0.530409] futex hash table entries: 256 (order: 2, 16384 bytes)
> [ 0.530623] NET: Registered protocol family 16
> [ 0.530644] xen:grant_table: Grant tables using version 1 layout
> [ 0.530659] Grant table initialized
> [ 0.530809] audit: initializing netlink subsys (disabled)
> [ 0.530908] audit: type=2000 audit(1563563921.812:1):
> state=initialized audit_enabled=0 res=1
> [ 0.531069] ACPI FADT declares the system doesn't support PCIe
> ASPM, so disable it
> [ 0.531077] ACPI: bus type PCI registered
> [ 0.531203] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.531212] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> [ 0.585062] PCI: Using configuration type 1 for base access
> [ 0.587021] cryptd: max_cpu_qlen set to 1000
> [ 0.587137] ACPI: Added _OSI(Module Device)
> [ 0.587142] ACPI: Added _OSI(Processor Device)
> [ 0.587147] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.587151] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.587156] ACPI: Added _OSI(Linux-Dell-Video)
> [ 0.587160] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
> [ 0.634267] ACPI: 8 ACPI AML tables successfully acquired and loaded
> [ 0.640637] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
> [ 0.645652] ACPI: Dynamic OEM Table Load:
> [ 0.645663] ACPI: SSDT 0xFFFF88803A316000 00037F (v02 PmRef
> Cpu0Cst 00003001 INTL 20120913)
> [ 0.646212] ACPI: Dynamic OEM Table Load:
> [ 0.646221] ACPI: SSDT 0xFFFF888039811800 00063F (v02 PmRef
> Cpu0Ist 00003000 INTL 20120913)
> [ 0.648440] ACPI: EC: EC started
> [ 0.648446] ACPI: EC: interrupt blocked
> [ 0.648501] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
> [ 0.648507] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50,
> EC_CMD/EC_SC=0x66, EC_DATA=0x62
> [ 0.648513] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to
> handle transactions
> [ 0.648519] ACPI: Interpreter enabled
> [ 0.648531] ACPI: (supports S0 S5)
> [ 0.648535] ACPI: Using IOAPIC for interrupt routing
> [ 0.648582] PCI: Using host bridge windows from ACPI; if necessary,
> use "pci=nocrs" and report a bug
> [ 0.649911] ACPI: Enabled 7 GPEs in block 00 to 7F
> [ 0.653085] ACPI: Power Resource [PG00] (on)
> [ 0.653513] ACPI: Power Resource [PG01] (on)
> [ 0.653972] ACPI: Power Resource [PG02] (on)
> [ 0.660615] ACPI: Power Resource [WRST] (on)
> [ 0.661101] ACPI: Power Resource [WRST] (on)
> [ 0.661544] ACPI: Power Resource [WRST] (on)
> [ 0.661975] ACPI: Power Resource [WRST] (on)
> [ 0.662467] ACPI: Power Resource [WRST] (on)
> [ 0.662901] ACPI: Power Resource [WRST] (on)
> [ 0.663328] ACPI: Power Resource [WRST] (on)
> [ 0.663818] ACPI: Power Resource [WRST] (on)
> [ 0.664249] ACPI: Power Resource [WRST] (on)
> [ 0.664690] ACPI: Power Resource [WRST] (on)
> [ 0.665203] ACPI: Power Resource [WRST] (on)
> [ 0.665634] ACPI: Power Resource [WRST] (on)
> [ 0.666070] ACPI: Power Resource [WRST] (on)
> [ 0.666553] ACPI: Power Resource [WRST] (on)
> [ 0.666979] ACPI: Power Resource [WRST] (on)
> [ 0.667406] ACPI: Power Resource [WRST] (on)
> [ 0.667897] ACPI: Power Resource [WRST] (on)
> [ 0.668338] ACPI: Power Resource [WRST] (on)
> [ 0.668780] ACPI: Power Resource [WRST] (on)
> [ 0.669265] ACPI: Power Resource [WRST] (on)
> [ 0.684236] ACPI: Power Resource [FN00] (off)
> [ 0.684400] ACPI: Power Resource [FN01] (off)
> [ 0.684510] ACPI: Power Resource [FN02] (off)
> [ 0.684616] ACPI: Power Resource [FN03] (off)
> [ 0.684730] ACPI: Power Resource [FN04] (off)
> [ 0.686266] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
> [ 0.686279] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
> ClockPM Segments MSI]
> [ 0.689484] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug
> SHPCHotplug PME PCIeCapability LTR]
> [ 0.689492] acpi PNP0A08:00: FADT indicates ASPM is unsupported,
> using BIOS configuration
> [ 0.690190] PCI host bridge to bus 0000:00
> [ 0.690197] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
> [ 0.690203] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 0.690208] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000bffff window]
> [ 0.690215] pci_bus 0000:00: root bus resource [mem
> 0x90000000-0xdfffffff window]
> [ 0.690221] pci_bus 0000:00: root bus resource [mem
> 0xfd000000-0xfe7fffff window]
> [ 0.690227] pci_bus 0000:00: root bus resource [bus 00-fe]
> (XEN) Bogus DMIBAR 0xfed18001 on 0000:00:00.0
> [ 0.691006] pci 0000:00:02.0: BAR 2: assigned to efifb
> [ 0.694276] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
> [ 0.694833] pci 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
> [ 0.698688] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.699418] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth,
> limited by 2.5 GT/s x1 link at 0000:00:1c.5 (capable of 7.876 Gb/s
> with 8 GT/s x1 link)
> [ 0.699724] pci 0000:00:1c.5: PCI bridge to [bus 02]
> [ 0.704143] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.704232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
> [ 0.704322] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.704418] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.704507] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.704592] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.704680] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.704768] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.705534] ACPI: EC: interrupt unblocked
> [ 0.705573] ACPI: EC: event unblocked
> [ 0.705598] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50,
> EC_CMD/EC_SC=0x66, EC_DATA=0x62
> [ 0.705605] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to
> handle transactions and events
> [ 0.705655] xen:balloon: Initialising balloon driver
> [ 0.705801] SCSI subsystem initialized
> [ 0.705887] ACPI: bus type USB registered
> [ 0.705909] usbcore: registered new interface driver usbfs
> [ 0.705920] usbcore: registered new interface driver hub
> [ 0.705940] usbcore: registered new device driver usb
> [ 0.705956] pps_core: LinuxPPS API ver. 1 registered
> [ 0.705961] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo Giometti <giometti@linux.it>
> [ 0.705969] PTP clock support registered
> [ 0.706008] Registered efivars operations
> [ 0.710766] PCI: Using ACPI for IRQ routing
> [ 0.748524] NetLabel: Initializing
> [ 0.748529] NetLabel: domain hash size = 128
> [ 0.748533] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
> [ 0.748553] NetLabel: unlabeled traffic allowed by default
> [ 0.748718] clocksource: Switched to clocksource tsc-early
> [ 0.765269] VFS: Disk quotas dquot_6.6.0
> [ 0.765291] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.765339] FS-Cache: Loaded
> [ 0.765343] hugetlbfs: disabling because there are no supported
> hugepage sizes
> [ 0.765401] CacheFiles: Loaded
> [ 0.765415] pnp: PnP ACPI init
> [ 0.765704] system 00:00: [io 0x0a00-0x0a2f] has been reserved
> [ 0.766250] Already setup the GSI :4
> [ 0.768279] system 00:05: [io 0x0200-0x027f] has been reserved
> [ 0.769079] system 00:06: [io 0x029c-0x029d] has been reserved
> [ 0.769352] system 00:07: [io 0x0680-0x069f] has been reserved
> [ 0.769359] system 00:07: [io 0xffff] has been reserved
> [ 0.769364] system 00:07: [io 0xffff] has been reserved
> [ 0.769369] system 00:07: [io 0xffff] has been reserved
> [ 0.769374] system 00:07: [io 0x1800-0x18fe] has been reserved
> [ 0.769380] system 00:07: [io 0x164e-0x164f] has been reserved
> [ 0.769579] system 00:09: [io 0x1854-0x1857] has been reserved
> [ 0.769879] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
> [ 0.769886] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 0.769892] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 0.769898] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.769904] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 0.769909] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
> [ 0.769915] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
> [ 0.769921] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
> [ 0.769927] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
> [ 0.769933] system 00:0a: [mem 0xdffe0000-0xdfffffff] has been reserved
> [ 0.769988] system 00:0b: [mem 0xfd000000-0xfdabffff] has been reserved
> [ 0.769995] system 00:0b: [mem 0xfdad0000-0xfdadffff] has been reserved
> [ 0.770001] system 00:0b: [mem 0xfdb00000-0xfdffffff] has been reserved
> [ 0.7[ 1.491547] Key type encrypted registered
> [ 1.493473] rtc_cmos 00:08: setting system clock to 2019-07-19
> 19:18:43 UTC (1563563923)
> [ 1.494433] Waiting 3 sec before mounting root device...
> [ 1.700989] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 1.706737] ata1.00: ATA-9: SQF-S25M8-64G-SAC, SAFM02A3, max UDMA/133
> [ 1.707867] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 32), AA
> [ 1.709118] ata1.00: configured for UDMA/133
> [ 1.710321] scsi 0:0:0:0: Direct-Access ATA
> SQF-S25M8-64G-SA 02A3 PQ: 0 ANSI: 5
> [ 1.711647] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks:
> (64.0 GB/59.6 GiB)
> [ 1.712791] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.713976] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.715068] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.717800] sda: sda1 sda2 sda3 sda4 sda9
> [ 1.719269] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.721673] ata2: SATA link down (SStatus 4 SControl 300)
> [ 1.737879] usb 1-1: new low-speed USB device number 2 using xhci_hcd
> [ 1.837912] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
> 0x23fa80a809f, max_idle_ns: 440795273818 ns
> [ 1.839077] clocksource: Switched to clocksource tsc
> [ 1.928802] input: Logitech USB Keyboard as
> /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C31C.0001/input/input6
> [ 1.997981] hid-generic 0003:046D:C31C.0001: input: USB HID v1.10
> Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1/input0
> [ 2.004853] input: Logitech USB Keyboard Consumer Control as
> /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input7
> [ 2.068052] input: Logitech USB Keyboard System Control as
> /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input8
> [ 2.069388] hid-generic 0003:046D:C31C.0002: input: USB HID v1.10
> Device [Logitech USB Keyboard] on usb-0000:00:14.0-1/input1
> [ 2.217897] usb 1-7: new full-speed USB device number 3 using xhci_hcd
> [ 2.399047] random: fast init done
> [ 4.484487] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
> [ 4.487173] Freeing unused kernel image memory: 1584K
> [ 4.507975] Write protecting the kernel read-only data: 18432k
> [ 4.516183] Freeing unused kernel image memory: 2020K
> [ 4.517742] Freeing unused kernel image memory: 1028K
> [ 4.518785] Run /sbin/init as init process
> [ 5.129834] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
> [ 5.130918] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
> [ 5.132125] Already setup the GSI :16
> [ 5.133307] e1000e 0000:00:1f.6: Interrupt Throttling Rate
> (ints/sec) set to dynamic conservative mode
> [ 5.234464] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized):
> registered PHC clock
> [ 5.326539] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width
> x1) 00:0b:ab:e4:d0:c5
> [ 5.327674] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
> [ 5.330518] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
> [ 5.362049] cfg80211: Loading compiled-in X.509 certificates for
> regulatory database
> [ 5.371724] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> [ 5.372933] platform regulatory.0: Direct firmware load for
> regulatory.db failed with error -2
> [ 5.374112] cfg80211: failed to load regulatory.db
> [ 5.424847] rtl8723be 0000:01:00.0: enabling device (0000 -> 0003)
> [ 5.426136] Already setup the GSI :18
> [ 5.459064] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
> [ 5.462917] rtlwifi: rtlwifi: wireless switch is on
> [ 5.481131] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
> [ 5.482341] igb: Copyright (c) 2007-2014 Intel Corporation.
> [ 5.483648] Already setup the GSI :17
> [ 5.514869] pps pps0: new PPS source ptp1
> [ 5.516458] igb 0000:02:00.0: added PHC on eth1
> [ 5.517974] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
> [ 5.519441] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0b:ab:e4:d0:c6
> [ 5.520701] igb 0000:02:00.0: eth1: PBA No: 000200-000
> [ 5.521831] igb 0000:02:00.0: Using MSI-X interrupts. 1 rx
> queue(s), 1 tx queue(s)
> ................ .............. ................
> ................ ............ ................
> .... ......... ....
> ................ ....... ................
> ................ ..... ................
> ... . ....
> ................ ................
> ............... ................
>
> Edge Virtualization Engine
> Take a look around and don't forget to use eve(1).
> login[518]: root login on 'hvc0'
> linuxkit-000babe4d0c5:~#
> [ 6.069552] IPVS: ftp: loaded support on port[0] = 21
> [ 6.158121] FAT-fs (sda4): utf8 is not a recommended IO charset for
> FAT filesystems, filesystem will be case sensitive!
> [ 6.163850] FAT-fs (sda4): Volume was not properly unmounted. Some
> data may be corrupt. Please run fsck.
> [ 6.222733] IPVS: ftp: loaded support on port[0] = 21
> [ 6.261491] random: crng init done
> 2019/07/19 19:18:48 Wrote 1000 bytes of entropy, exiting as oneshot
> [ 8.572992] usbcore: registered new interface driver qcserial
> [ 8.574283] usbserial: USB Serial support registered for Qualcomm USB modem
> [ 8.586813] usbcore: registered new interface driver cdc_wdm
> [ 8.593148] usbcore: registered new interface driver qmi_wwan
> [ 8.823492] EXT4-fs (sda9): mounting ext3 file system using the
> ext4 subsystem
> [ 8.834988] EXT4-fs (sda9): mounted filesystem with ordered data
> mode. Opts: (null)
>
> linuxkit-000babe4d0c5:~# eve enter
> / # xl info
> host : linuxkit-000babe4d0c5
> release : 4.19.5-linuxkit
> version : #1 SMP Mon Jun 17 17:43:29 UTC 2019
> machine : x86_64
> nr_cpus : 2
> max_cpu_id : 3
> nr_nodes : 1
> cores_per_socket : 2
> threads_per_core : 1
> cpu_mhz : 2496.011
> hw_caps :
> bfebfbff:76faf3ff:2c100800:00000121:0000000f:009c6fbf:00000000:00000100
> virt_caps : pv hvm hvm_directio pv_directio
> total_memory : 4003
> free_memory : 2912
> sharing_freed_memory : 0
> sharing_used_memory : 0
> outstanding_claims : 0
> free_cpus : 0
> xen_major : 4
> xen_minor : 12
> xen_extra : .0
> xen_version : 4.12.0
> xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32
> hvm-3.0-x86_32p hvm-3.0-x86_64
> xen_scheduler : credit2
> xen_pagesize : 4096
> platform_params : virt_start=0xffff800000000000
> xen_changeset :
> xen_commandline : iommu=no-igfx com1=115200,8n1
> console=com1,vga dom0_mem=1024M,max:1024M dom0_max_vcpus=1
> dom0_vcpus_pin smt=false
> cc_compiler : gcc (Alpine 6.4.0) 6.4.0
> cc_compile_by :
> cc_compile_domain :
> cc_compile_date : Mon Jun 17 18:50:07 UTC 2019
> build_id : 00f4459480dee2ae1aab93918bb20f4b9719364b
> xend_config_format : 4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2019-07-19 20:02 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-19 19:31 [Xen-devel] [BUG] After upgrade to Xen 4.12.0 iommu=no-igfx Roman Shaposhnik
2019-07-19 20:02 ` Roman Shaposhnik [this message]
2019-07-22 8:20 ` Paul Durrant
2019-07-22 11:48 ` Roger Pau Monné
2019-07-22 11:54 ` Paul Durrant
2019-07-22 13:48 ` Roger Pau Monné
2019-07-22 14:03 ` Paul Durrant
2019-07-22 14:39 ` Roger Pau Monné
2019-07-22 15:02 ` Paul Durrant
2019-07-22 15:21 ` Roger Pau Monné
2019-07-22 23:36 ` Roman Shaposhnik
2019-07-22 23:47 ` Andrew Cooper
2019-07-23 17:32 ` Roman Shaposhnik
2019-07-23 17:35 ` Andrew Cooper
2019-07-23 17:48 ` Roman Shaposhnik
2019-07-23 17:50 ` Andrew Cooper
2019-07-23 17:58 ` Roman Shaposhnik
2019-07-23 18:12 ` Andrew Cooper
2019-07-23 18:25 ` Roman Shaposhnik
2019-07-26 7:58 ` Jan Beulich
2019-07-30 17:56 ` Roman Shaposhnik
2019-07-31 8:34 ` Jan Beulich
2019-07-31 8:58 ` Andrew Cooper
2019-07-31 9:30 ` Jan Beulich
2019-07-31 19:37 ` Roman Shaposhnik
2019-07-24 12:00 ` Jan Beulich
2019-07-24 12:04 ` Jan Beulich
2019-07-24 11:23 ` Andrew Cooper
2019-07-24 11:40 ` Andrew Cooper
2019-07-24 14:11 ` Roger Pau Monné
2019-07-26 0:47 ` Roman Shaposhnik
2019-07-26 9:35 ` Roger Pau Monné
2019-07-30 9:21 ` Roger Pau Monné
2019-07-30 17:55 ` Roman Shaposhnik
2019-07-31 8:31 ` Jan Beulich
2019-07-31 8:36 ` Roger Pau Monné
2019-07-31 8:43 ` Roger Pau Monné
2019-07-31 19:35 ` Roman Shaposhnik
2019-07-31 19:46 ` Andrew Cooper
2019-07-31 21:03 ` Roman Shaposhnik
2019-08-01 8:15 ` Roger Pau Monné
2019-08-01 18:25 ` Roman Shaposhnik
2019-08-02 8:05 ` Roger Pau Monné
2019-08-06 16:17 ` Roger Pau Monné
2019-08-06 21:48 ` Roman Shaposhnik
2019-08-07 7:08 ` Jan Beulich
2019-08-07 9:57 ` Roger Pau Monné
2019-08-07 10:03 ` Jan Beulich
2019-08-07 7:35 ` Roger Pau Monné
2019-08-07 8:31 ` Jan Beulich
2019-08-07 10:17 ` Roger Pau Monné
2019-08-12 8:57 ` Roger Pau Monné
2019-08-13 19:24 ` Roman Shaposhnik
2019-08-14 8:06 ` Roger Pau Monné
2019-08-19 5:00 ` Roman Shaposhnik
2019-08-19 8:16 ` Roger Pau Monné
2019-08-20 2:03 ` Roman Shaposhnik
2019-08-01 7:35 ` Jan Beulich
2019-07-31 19:30 ` Roman Shaposhnik
2019-08-01 8:45 ` Roger Pau Monné
2019-08-01 18:19 ` Roman Shaposhnik
2019-07-20 16:39 ` Andrew Cooper
2019-07-22 8:03 ` Paul Durrant
2019-07-24 17:42 ` Rich Persaud
2019-07-26 1:13 ` Roman Shaposhnik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAMmSBy8CcG08-+-F6fvwmH1oEKpsV8OGEco94g04dZcyyFWKbw@mail.gmail.com \
--to=roman@zededa.com \
--cc=andrew.cooper3@citrix.com \
--cc=boris.ostrovsky@oracle.com \
--cc=jbeulich@suse.com \
--cc=jgross@suse.com \
--cc=paul.durrant@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).