Hi Wei,

first: thanks for yo= ur effort. :)

Find attached the=C2=A0'xl create' output and the /var/log/xen/conso= le/hypervisor.log files=C2= =A0after creating the same domain without the 'device_model_stubdomain_= override' configuration option.

'xl list&#= 39; command output...

Na= me =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 ID =C2=A0 Mem VC= PUs =C2=A0 =C2=A0 =C2=A0State =C2=A0 Time(s)

Domain-0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A00 =C2=A01023 =C2=A0 =C2=A0 2 =C2=A0 =C2=A0 r----- =C2=A0 11608.1

win7-sp1-x64-2 =C2=A0 =C2= =A0 =C2=A0 28 =C2=A02048 =C2=A0 =C2=A0 1 =C2=A0 =C2=A0 ------ =C2=A0 =C2=A0= =C2=A0 0.4

Regards,

Fanny

2016-04-06 13:12 GM= T+02:00 Wei Liu <wei.liu2@citrix.com>:

On Tue, Apr 05, 2016 at 05:17:00PM +0200, F= anny Dwargee wrote:
> Hi,
>
> after adding the 'device_model_stubdomain_override =3D 1' to a= n otherwise
> fine configuration the domain crashes on start.
>
> Xen is v4.6.1 compiled from source on Debian Jessie 64bits this way: >
>=C2=A0 =C2=A0 - ./configure --enable-stubdom --enable-githttp >=C2=A0 =C2=A0 - make dist-xen
>=C2=A0 =C2=A0 - make dist-tools
>=C2=A0 =C2=A0 - make dist-stubdom
>=C2=A0 =C2=A0 - make install-xen
>=C2=A0 =C2=A0 - make install-tools
>=C2=A0 =C2=A0 - make install-stubdom
>
> As pointed out before the same configuration file without the ' > device_model_stubdomain_override' works flawlessly.
>
> This is the 'xl list' command output while the domain is start= ing:
>
> Name=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 ID=C2=A0 =C2=A0Mem VCPUs=C2=A0 =C2=A0 =C2=A0 State=C2=A0 =C2=A0Time(s)<= br> > Domain-0=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0= 0=C2=A0 1022=C2=A0 =C2=A0 =C2=A02=C2=A0 =C2=A0 =C2=A0r-----=C2=A0 =C2=A0 = =C2=A0318.3
> win7-sp1-x64-2=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 20=C2=A0 2048=C2=A0 = =C2=A0 =C2=A01=C2=A0 =C2=A0 =C2=A0r-----=C2=A0 =C2=A0 =C2=A0 =C2=A05.5
> win7-sp1-x64-2-dm=C2=A0 =C2=A0 =C2=A0 =C2=A021=C2=A0 =C2=A0 44=C2=A0 = =C2=A0 =C2=A01=C2=A0 =C2=A0 =C2=A0r-----=C2=A0 =C2=A0 =C2=A0 =C2=A06.0
>
>
> As you can see both domains are started (the stub and the original dom= ain)
>
> Find attached the domain configuration file, 'xl info' output,= 'xl create'
> output and the /var/log/xen/console/hypervisor.log file, notice the gr= ant
> table error on console-hypervisor.log
>
> I'd very grateful for any help finding the cause of this problem.<= br> >

The hypervsior log show some error, but unfortunately it is not
immediately clear what went wrong.

Do you have a working base line setup so that I can compare the
difference?

Wei.

> Best regards,
>
> Fanny