From: Anthony PERARD <anthony.perard@citrix.com>
To: Jan Beulich <jbeulich@suse.com>
Cc: "Andrew Cooper" <andrew.cooper3@citrix.com>,
"Roger Pau Monné" <roger.pau@citrix.com>, "Wei Liu" <wl@xen.org>,
xen-devel@lists.xenproject.org
Subject: Re: [XEN PATCH v6 25/31] build: remove unneeded deps of x86_emulate.o
Date: Mon, 9 Aug 2021 17:02:10 +0100 [thread overview]
Message-ID: <YRFRgq+h72Zenpum@perard> (raw)
In-Reply-To: <1e337c91-4380-7a9b-8969-f326a9680e08@suse.com>
On Fri, Aug 06, 2021 at 06:06:37PM +0200, Jan Beulich wrote:
> On 01.07.2021 16:10, Anthony PERARD wrote:
> > Those two dependencies already exist so make doesn't need to know
> > about them. The dependency will be generated by $(CC).
> >
> > Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
>
> Unless I'm mistaken this was actually an omission by 68b1230ae393
> ("Auto-build dependency files in hypervisor build tree"), which
> would again suggest this can go in independently of all of the
> earlier patches? In any event
That sound right. Yes.
> Reviewed-by: Jan Beulich <jbeulich@suse.com>
Thanks,
--
Anthony PERARD
next prev parent reply other threads:[~2021-08-09 16:06 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-01 14:09 [XEN PATCH v6 00/31] xen: Build system improvements Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 01/31] build: fix %.s: %.S rule Anthony PERARD
2021-07-05 14:40 ` Jan Beulich
2021-07-01 14:09 ` [XEN PATCH v6 02/31] build: introduce cpp_flags macro Anthony PERARD
2021-07-07 14:18 ` Jan Beulich
2021-07-12 10:53 ` Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 03/31] build: use if_changed on built_in.o Anthony PERARD
2021-07-08 12:03 ` Andrew Cooper
2021-07-12 11:08 ` Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 04/31] build: use if_changed_rules with %.o:%.c targets Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 05/31] build: factorise generation of the linker scripts Anthony PERARD
2021-07-07 14:25 ` Jan Beulich
2021-07-12 11:02 ` Anthony PERARD
2021-07-13 7:28 ` Jan Beulich
2021-07-01 14:09 ` [XEN PATCH v6 06/31] x86/mm: avoid building multiple .o from a single .c file Anthony PERARD
2021-07-07 14:45 ` Jan Beulich
2021-07-12 12:49 ` Anthony PERARD
2021-07-13 7:32 ` Jan Beulich
2021-07-01 14:09 ` [XEN PATCH v6 07/31] build,include: rework compat-build-source.py Anthony PERARD
2021-07-07 14:58 ` Jan Beulich
2021-07-12 14:35 ` Anthony PERARD
2021-07-13 7:37 ` Jan Beulich
2021-07-01 14:09 ` [XEN PATCH v6 08/31] build,include: rework compat-build-header.py Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 09/31] build: clean "lib.a" Anthony PERARD
2021-07-07 15:03 ` Jan Beulich
2021-07-12 14:42 ` Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 10/31] build: use $(kconfig) shortcut in clean rule Anthony PERARD
2021-07-07 15:05 ` Jan Beulich
2021-07-01 14:09 ` [XEN PATCH v6 11/31] build: fix clean targets when subdir-y is used Anthony PERARD
2021-07-07 15:15 ` Jan Beulich
2021-07-12 14:54 ` Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 12/31] build: use subdir-y in test/Makefile Anthony PERARD
2021-07-07 15:26 ` Jan Beulich
2021-07-12 15:22 ` Anthony PERARD
2021-07-13 7:41 ` Jan Beulich
2021-07-13 14:35 ` Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 13/31] build,tools: have default rules depends on symbols Anthony PERARD
2021-07-07 15:28 ` Jan Beulich
2021-07-01 14:09 ` [XEN PATCH v6 14/31] build,arm: move LDFLAGS change to arch.mk Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 15/31] build: move make option changes check earlier Anthony PERARD
2021-07-07 15:40 ` Jan Beulich
2021-07-12 16:21 ` Anthony PERARD
2021-07-13 7:42 ` Jan Beulich
2021-07-01 14:09 ` [XEN PATCH v6 16/31] build: avoid building arm/arm/*/head.o twice Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 17/31] build: convert binfile use to if_changed Anthony PERARD
2021-07-07 15:48 ` Jan Beulich
2021-07-12 16:32 ` Anthony PERARD
2021-07-13 7:51 ` Jan Beulich
2021-07-13 14:58 ` Anthony PERARD
2021-07-13 15:33 ` Jan Beulich
2021-07-01 14:09 ` [XEN PATCH v6 18/31] xen: move include/asm-* to include/arch-*/asm Anthony PERARD
2021-07-01 17:24 ` Paul Durrant
2021-07-01 17:26 ` Bob Eshleman
2021-08-05 7:04 ` Jan Beulich
2021-08-09 13:20 ` Anthony PERARD
2021-07-01 14:09 ` [XEN PATCH v6 19/31] build: rework .banner generation Anthony PERARD
2021-08-05 7:09 ` Jan Beulich
2021-08-09 13:31 ` Anthony PERARD
2021-07-01 14:10 ` [XEN PATCH v6 20/31] build: generate "include/xen/compile.h" with filechk Anthony PERARD
2021-08-05 7:20 ` Jan Beulich
2021-08-09 14:27 ` Anthony PERARD
2021-07-01 14:10 ` [XEN PATCH v6 21/31] build: set XEN_BUILD_EFI earlier Anthony PERARD
2021-08-05 7:27 ` Jan Beulich
2021-08-09 15:59 ` Anthony PERARD
2021-08-10 7:44 ` Jan Beulich
2021-07-01 14:10 ` [XEN PATCH v6 22/31] build: fix $(TARGET).efi creation in arch/arm Anthony PERARD
2021-07-01 14:10 ` [XEN PATCH v6 23/31] build: fix arch/x86/node.o rule Anthony PERARD
2021-07-07 16:04 ` Jan Beulich
2021-07-01 14:10 ` [XEN PATCH v6 24/31] build: set ALL_OBJS to main Makefile; move prelink.o to main Makefile Anthony PERARD
2021-07-01 14:10 ` [XEN PATCH v6 25/31] build: remove unneeded deps of x86_emulate.o Anthony PERARD
2021-08-06 16:06 ` Jan Beulich
2021-08-09 16:02 ` Anthony PERARD [this message]
2021-07-01 14:10 ` [XEN PATCH v6 26/31] build: clean common temporary files from root makefile Anthony PERARD
2021-07-01 14:10 ` [XEN PATCH v6 27/31] build: prepare to always invoke $(MAKE) from xen/, use $(obj) Anthony PERARD
2021-07-01 14:10 ` [XEN PATCH v6 28/31] build: rework test/livepatch/Makefile Anthony PERARD
2021-07-01 14:10 ` [XEN PATCH v6 29/31] build: build everything from the root dir, use obj=$subdir Anthony PERARD
2021-07-01 17:49 ` Bob Eshleman
2021-07-01 14:10 ` [XEN PATCH v6 30/31] build: introduce if_changed_deps Anthony PERARD
2021-07-01 14:10 ` [XEN PATCH v6 31/31] build,riscv: tell the build system about riscv64/head.S Anthony PERARD
2021-07-01 17:52 ` Bob Eshleman
2021-07-02 4:45 ` Alistair Francis
2021-07-10 0:50 ` Connor Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YRFRgq+h72Zenpum@perard \
--to=anthony.perard@citrix.com \
--cc=andrew.cooper3@citrix.com \
--cc=jbeulich@suse.com \
--cc=roger.pau@citrix.com \
--cc=wl@xen.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).