From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <SRS0=Vf37=J7=lists.xenproject.org=xen-devel-bounces@kernel.org>
X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
	aws-us-west-2-korg-lkml-1.web.codeaurora.org
X-Spam-Level: 
X-Spam-Status: No, score=-14.4 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH,
	DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,INCLUDES_CR_TRAILER,INCLUDES_PATCH,
	LOTS_OF_MONEY,MAILING_LIST_MULTI,MONEY_NOHTML,NORMAL_HTTP_TO_IP,
	NUMERIC_HTTP_ADDR,SPF_HELO_NONE,SPF_PASS,T_MONEY_PERCENT,USER_AGENT_SANE_1
	autolearn=ham autolearn_force=no version=3.4.0
Received: from mail.kernel.org (mail.kernel.org [198.145.29.99])
	by smtp.lore.kernel.org (Postfix) with ESMTP id 869C9C433B4
	for <xen-devel@archiver.kernel.org>; Tue,  4 May 2021 22:55:57 +0000 (UTC)
Received: from lists.xenproject.org (lists.xenproject.org [192.237.175.120])
	(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
	(No client certificate requested)
	by mail.kernel.org (Postfix) with ESMTPS id CFD51613D1
	for <xen-devel@archiver.kernel.org>; Tue,  4 May 2021 22:55:56 +0000 (UTC)
DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org CFD51613D1
Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org
Authentication-Results: mail.kernel.org; spf=pass smtp.mailfrom=xen-devel-bounces@lists.xenproject.org
Received: from list by lists.xenproject.org with outflank-mailman.122753.231551 (Exim 4.92)
	(envelope-from <xen-devel-bounces@lists.xenproject.org>)
	id 1le3x5-0007uf-Gd; Tue, 04 May 2021 22:55:39 +0000
X-Outflank-Mailman: Message body and most headers restored to incoming version
Received: by outflank-mailman (output) from mailman id 122753.231551; Tue, 04 May 2021 22:55:39 +0000
Received: from localhost ([127.0.0.1] helo=lists.xenproject.org)
	by lists.xenproject.org with esmtp (Exim 4.92)
	(envelope-from <xen-devel-bounces@lists.xenproject.org>)
	id 1le3x5-0007uY-Cf; Tue, 04 May 2021 22:55:39 +0000
Received: by outflank-mailman (input) for mailman id 122753;
 Tue, 04 May 2021 22:55:38 +0000
Received: from us1-rack-iad1.inumbo.com ([172.99.69.81])
 by lists.xenproject.org with esmtp (Exim 4.92) (envelope-from
 <SRS0=jbig=J7=kernel.org=sstabellini@srs-us1.protection.inumbo.net>)
 id 1le3x4-0007uT-7s
 for xen-devel@lists.xenproject.org; Tue, 04 May 2021 22:55:38 +0000
Received: from mail.kernel.org (unknown [198.145.29.99])
 by us1-rack-iad1.inumbo.com (Halon) with ESMTPS
 id 28f15641-e996-4c9f-b49b-d1434d3201fc;
 Tue, 04 May 2021 22:55:36 +0000 (UTC)
Received: by mail.kernel.org (Postfix) with ESMTPSA id DB394613D8;
 Tue,  4 May 2021 22:55:34 +0000 (UTC)
X-BeenThere: xen-devel@lists.xenproject.org
List-Id: Xen developer discussion <xen-devel.lists.xenproject.org>
List-Unsubscribe: <https://lists.xenproject.org/mailman/options/xen-devel>,
 <mailto:xen-devel-request@lists.xenproject.org?subject=unsubscribe>
List-Post: <mailto:xen-devel@lists.xenproject.org>
List-Help: <mailto:xen-devel-request@lists.xenproject.org?subject=help>
List-Subscribe: <https://lists.xenproject.org/mailman/listinfo/xen-devel>,
 <mailto:xen-devel-request@lists.xenproject.org?subject=subscribe>
Errors-To: xen-devel-bounces@lists.xenproject.org
Precedence: list
Sender: "Xen-devel" <xen-devel-bounces@lists.xenproject.org>
X-Inumbo-ID: 28f15641-e996-4c9f-b49b-d1434d3201fc
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org;
	s=k20201202; t=1620168935;
	bh=gAocMcTEQVz/SSdkt1ne1WB+VXRcmOjHfzI5QMHs+xM=;
	h=Date:From:To:cc:Subject:In-Reply-To:References:From;
	b=HTh6xiNVYqDco5/wGDBoGpAB7eabdcA2K3Xbv5a7wf5jDlwXI5eMZsnSSElWd2etQ
	 FumCKWA/BTNBqQmxuP//l1UE1y2vgE9JKUcTZ6mMMFWNX5lB4vGM4dYSQIHHRspkaK
	 YOIB+uDNP2hJSRwJuKDVCVVqKpI75fjoCI5TWnjz8P51JoBqktmmRaDtJvRZhaU7fh
	 aUAE806P6HyXiUIY2g8T4D8D/oX82LK2gUqn8I/2SY1TVe7sB3IMrk91DZojLOBCm0
	 AVoPacS1zaIAdipptS7zRWN7wXJShN4mU3IRP5qv8pJID4IWHHnyUUxx9eWdTr8Ws+
	 CRaX9Y5YLEHqA==
Date: Tue, 4 May 2021 15:55:34 -0700 (PDT)
From: Stefano Stabellini <sstabellini@kernel.org>
X-X-Sender: sstabellini@sstabellini-ThinkPad-T480s
To: Luca Fancellu <luca.fancellu@arm.com>
cc: xen-devel@lists.xenproject.org, bertrand.marquis@arm.com, wei.chen@arm.com, 
    Andrew Cooper <andrew.cooper3@citrix.com>, 
    George Dunlap <george.dunlap@citrix.com>, Ian Jackson <iwj@xenproject.org>, 
    Jan Beulich <jbeulich@suse.com>, Julien Grall <julien@xen.org>, 
    Stefano Stabellini <sstabellini@kernel.org>, Wei Liu <wl@xen.org>
Subject: Re: [PATCH v5 1/3] docs: add doxygen support for html
 documentation
In-Reply-To: <20210504133145.767-2-luca.fancellu@arm.com>
Message-ID: <alpine.DEB.2.21.2105041532030.5018@sstabellini-ThinkPad-T480s>
References: <20210504133145.767-1-luca.fancellu@arm.com> <20210504133145.767-2-luca.fancellu@arm.com>
User-Agent: Alpine 2.21 (DEB 202 2017-01-01)
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII

On Tue, 4 May 2021, Luca Fancellu wrote:
> Add doxygen support to build html documentation with sphinx,
> to do that the following modification are applied:
> 
> 1) Modify docs/configure.ac and consequently configure script
>    to check, through the ./configure script, the presence in
>    the system of the sphinx-build binary, if it is found then
>    it checks also the presence of the doxygen binary, breathe
>    and sphinx-rtd-theme python packages.
>    Doxygen and the packages are required only if sphinx-build
>    is found, otherwise the Makefile will simply skip the
>    sphinx html generation.
>    The ax_python_module.m4 support is needed to check for
>    python packages.
> 2) Add doxygen templates and configuration file
> 3) Modify docs/Makefile to call in sequence doxygen and
>    sphinx-build, the doxygen configuration file will be
>    modified to include the xen absolute path and
>    a list of header to parse.
>    A doxygen_input.h file is generated to include every
>    header listed in the doxy_input.list file.
> 4) Add preprocessor called by doxygen before parsing headers,
>    it will include in every header a doxygen_include.h file
>    that provides missing defines and includes that are
>    usually passed by the compiler.

This is clearly is a gargantuan work! Thank you so much!

Is there a way we can split this patch somehow? Given the nature of the
work, obvious we can't do a line-by-line review of everything, but I
think it would be good to split it so that we can more easily ack parts
of it and review others.

For instance something like the following:

- one patch for docs/xen.doxyfile.in for which you can already add my
  acked-by judging by the output[1]
- one patch to add the png image, also add my acked-by
- one patch for mainpage.md, header.html, footer.html, and
  customdoxygen.css, I think they can all be on a single patch and have
  my acked-by
- one patch to add the new m4 macros under m4/
- one patch with changes to docs/configure.ac, docs/configure,
  config/Docs.mk.in
- one patch with doxy-preprocessor.py, doxy_input.list,
  doxygen_include.h.in
- one patch with changes to docs/Makefile and docs/conf.py

Does this sound reasonable to you?


[1] https://luca.fancellu.gitlab.io/xen-docs/hypercall-interfaces/arm64/grant_tables.html


> Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
> ---
> v4 changes:
> - create alias @keepindent/@endkeepindent for the doxygen
>   command @code/@endcode
> v3 changes:
> - add preprocessor to handle missing defines and anonymous
>   structs/unions before doxygen parsing
> - modification to Makefile to handle the new process
> v2 changes:
> - Fix bug in Makefile when sphinx is not found in the system
> ---
>  .gitignore                                   |    6 +
>  config/Docs.mk.in                            |    2 +
>  docs/Makefile                                |   42 +-
>  docs/conf.py                                 |   48 +-
>  docs/configure                               |  258 ++
>  docs/configure.ac                            |   15 +
>  docs/xen-doxygen/customdoxygen.css           |   36 +
>  docs/xen-doxygen/doxy-preprocessor.py        |  110 +
>  docs/xen-doxygen/doxy_input.list             |    0
>  docs/xen-doxygen/doxygen_include.h.in        |   32 +
>  docs/xen-doxygen/footer.html                 |   21 +
>  docs/xen-doxygen/header.html                 |   56 +
>  docs/xen-doxygen/mainpage.md                 |    5 +
>  docs/xen-doxygen/xen_project_logo_165x67.png |  Bin 0 -> 18223 bytes
>  docs/xen.doxyfile.in                         | 2316 ++++++++++++++++++
>  m4/ax_python_module.m4                       |   56 +
>  m4/docs_tool.m4                              |    9 +
>  17 files changed, 3006 insertions(+), 6 deletions(-)
>  create mode 100644 docs/xen-doxygen/customdoxygen.css
>  create mode 100755 docs/xen-doxygen/doxy-preprocessor.py
>  create mode 100644 docs/xen-doxygen/doxy_input.list
>  create mode 100644 docs/xen-doxygen/doxygen_include.h.in
>  create mode 100644 docs/xen-doxygen/footer.html
>  create mode 100644 docs/xen-doxygen/header.html
>  create mode 100644 docs/xen-doxygen/mainpage.md
>  create mode 100644 docs/xen-doxygen/xen_project_logo_165x67.png
>  create mode 100644 docs/xen.doxyfile.in
>  create mode 100644 m4/ax_python_module.m4
> 
> diff --git a/.gitignore b/.gitignore
> index 1c2fa1530b..d271e0ce6a 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -58,6 +58,12 @@ docs/man7/
>  docs/man8/
>  docs/pdf/
>  docs/txt/
> +docs/doxygen-output
> +docs/sphinx
> +docs/xen.doxyfile
> +docs/xen.doxyfile.tmp
> +docs/xen-doxygen/doxygen_include.h
> +docs/xen-doxygen/doxygen_include.h.tmp
>  extras/mini-os*
>  install/*
>  stubdom/*-minios-config.mk
> diff --git a/config/Docs.mk.in b/config/Docs.mk.in
> index e76e5cd5ff..dfd4a02838 100644
> --- a/config/Docs.mk.in
> +++ b/config/Docs.mk.in
> @@ -7,3 +7,5 @@ POD2HTML            := @POD2HTML@
>  POD2TEXT            := @POD2TEXT@
>  PANDOC              := @PANDOC@
>  PERL                := @PERL@
> +SPHINXBUILD         := @SPHINXBUILD@
> +DOXYGEN             := @DOXYGEN@
> diff --git a/docs/Makefile b/docs/Makefile
> index 8de1efb6f5..2f784c36ce 100644
> --- a/docs/Makefile
> +++ b/docs/Makefile
> @@ -17,6 +17,18 @@ TXTSRC-y := $(sort $(shell find misc -name '*.txt' -print))
>  
>  PANDOCSRC-y := $(sort $(shell find designs/ features/ misc/ process/ specs/ \( -name '*.pandoc' -o -name '*.md' \) -print))
>  
> +# Directory in which the doxygen documentation is created
> +# This must be kept in sync with breathe_projects value in conf.py
> +DOXYGEN_OUTPUT = doxygen-output
> +
> +# Doxygen input headers from xen-doxygen/doxy_input.list file
> +DOXY_LIST_SOURCES != cat "xen-doxygen/doxy_input.list"
> +DOXY_LIST_SOURCES := $(realpath $(addprefix $(XEN_ROOT)/,$(DOXY_LIST_SOURCES)))
> +
> +DOXY_DEPS := xen.doxyfile \
> +			 xen-doxygen/mainpage.md \
> +			 xen-doxygen/doxygen_include.h
> +
>  # Documentation targets
>  $(foreach i,$(MAN_SECTIONS), \
>    $(eval DOC_MAN$(i) := $(patsubst man/%.$(i),man$(i)/%.$(i), \
> @@ -46,8 +58,28 @@ all: build
>  build: html txt pdf man-pages figs
>  
>  .PHONY: sphinx-html
> -sphinx-html:
> -	sphinx-build -b html . sphinx/html
> +sphinx-html: $(DOXY_DEPS) $(DOXY_LIST_SOURCES)
> +ifneq ($(SPHINXBUILD),no)
> +	$(DOXYGEN) xen.doxyfile
> +	XEN_ROOT=$(realpath $(XEN_ROOT)) $(SPHINXBUILD) -b html . sphinx/html
> +else
> +	@echo "Sphinx is not installed; skipping sphinx-html documentation."
> +endif
> +
> +xen.doxyfile: xen.doxyfile.in xen-doxygen/doxy_input.list
> +	@echo "Generating $@"
> +	@sed -e "s,@XEN_BASE@,$(realpath $(XEN_ROOT)),g" $< \
> +		| sed -e "s,@DOXY_OUT@,$(DOXYGEN_OUTPUT),g" > $@.tmp
> +	@$(foreach inc,\
> +		$(DOXY_LIST_SOURCES),\
> +		echo "INPUT += \"$(inc)\"" >> $@.tmp; \
> +	)
> +	mv $@.tmp $@
> +
> +xen-doxygen/doxygen_include.h: xen-doxygen/doxygen_include.h.in
> +	@echo "Generating $@"
> +	@sed -e "s,@XEN_BASE@,$(realpath $(XEN_ROOT)),g" $< > $@.tmp
> +	@mv $@.tmp $@
>  
>  .PHONY: html
>  html: $(DOC_HTML) html/index.html
> @@ -71,7 +103,11 @@ clean: clean-man-pages
>  	$(MAKE) -C figs clean
>  	rm -rf .word_count *.aux *.dvi *.bbl *.blg *.glo *.idx *~
>  	rm -rf *.ilg *.log *.ind *.toc *.bak *.tmp core
> -	rm -rf html txt pdf sphinx/html
> +	rm -rf html txt pdf sphinx $(DOXYGEN_OUTPUT)
> +	rm -f xen.doxyfile
> +	rm -f xen.doxyfile.tmp
> +	rm -f xen-doxygen/doxygen_include.h
> +	rm -f xen-doxygen/doxygen_include.h.tmp
>  
>  .PHONY: distclean
>  distclean: clean
> diff --git a/docs/conf.py b/docs/conf.py
> index 50e41501db..a48de42331 100644
> --- a/docs/conf.py
> +++ b/docs/conf.py
> @@ -13,13 +13,17 @@
>  # add these directories to sys.path here. If the directory is relative to the
>  # documentation root, use os.path.abspath to make it absolute, like shown here.
>  #
> -# import os
> -# import sys
> +import os
> +import sys
>  # sys.path.insert(0, os.path.abspath('.'))
>  
>  
>  # -- Project information -----------------------------------------------------
>  
> +if "XEN_ROOT" not in os.environ:
> +    sys.exit("$XEN_ROOT environment variable undefined.")
> +XEN_ROOT = os.path.abspath(os.environ["XEN_ROOT"])
> +
>  project = u'Xen'
>  copyright = u'2019, The Xen development community'
>  author = u'The Xen development community'
> @@ -35,6 +39,7 @@ try:
>              xen_subver = line.split(u"=")[1].strip()
>          elif line.startswith(u"export XEN_EXTRAVERSION"):
>              xen_extra = line.split(u"=")[1].split(u"$", 1)[0].strip()
> +
>  except:
>      pass
>  finally:
> @@ -44,6 +49,15 @@ finally:
>      else:
>          version = release = u"unknown version"
>  
> +try:
> +    xen_doxygen_output = None
> +
> +    for line in open(u"Makefile"):
> +        if line.startswith(u"DOXYGEN_OUTPUT"):
> +                xen_doxygen_output = line.split(u"=")[1].strip()
> +except:
> +    sys.exit("DOXYGEN_OUTPUT variable undefined.")
> +
>  # -- General configuration ---------------------------------------------------
>  
>  # If your documentation needs a minimal Sphinx version, state it here.
> @@ -53,7 +67,8 @@ needs_sphinx = '1.4'
>  # Add any Sphinx extension module names here, as strings. They can be
>  # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
>  # ones.
> -extensions = []
> +# breathe -> extension that integrates doxygen xml output with sphinx
> +extensions = ['breathe']
>  
>  # Add any paths that contain templates here, relative to this directory.
>  templates_path = ['_templates']
> @@ -175,6 +190,33 @@ texinfo_documents = [
>       'Miscellaneous'),
>  ]
>  
> +# -- Options for Breathe extension -------------------------------------------
> +
> +breathe_projects = {
> +    "Xen": "{}/docs/{}/xml".format(XEN_ROOT, xen_doxygen_output)
> +}
> +breathe_default_project = "Xen"
> +
> +breathe_domain_by_extension = {
> +    "h": "c",
> +    "c": "c",
> +}
> +breathe_separate_member_pages = True
> +breathe_show_enumvalue_initializer = True
> +breathe_show_define_initializer = True
> +
> +# Qualifiers to a function are causing Sphihx/Breathe to warn about
> +# Error when parsing function declaration and more.  This is a list
> +# of strings that the parser additionally should accept as
> +# attributes.
> +cpp_id_attributes = [
> +    '__syscall', '__deprecated', '__may_alias',
> +    '__used', '__unused', '__weak',
> +    '__DEPRECATED_MACRO', 'FUNC_NORETURN',
> +    '__subsystem',
> +]
> +c_id_attributes = cpp_id_attributes
> +
>  
>  # -- Options for Epub output -------------------------------------------------
>  
> diff --git a/docs/configure b/docs/configure
> index 569bd4c2ff..0ebf046a79 100755
> --- a/docs/configure
> +++ b/docs/configure
> @@ -588,6 +588,8 @@ ac_unique_file="misc/xen-command-line.pandoc"
>  ac_subst_vars='LTLIBOBJS
>  LIBOBJS
>  PERL
> +DOXYGEN
> +SPHINXBUILD
>  PANDOC
>  POD2TEXT
>  POD2HTML
> @@ -673,6 +675,7 @@ POD2MAN
>  POD2HTML
>  POD2TEXT
>  PANDOC
> +DOXYGEN
>  PERL'
>  
>  
> @@ -1318,6 +1321,7 @@ Some influential environment variables:
>    POD2HTML    Path to pod2html tool
>    POD2TEXT    Path to pod2text tool
>    PANDOC      Path to pandoc tool
> +  DOXYGEN     Path to doxygen tool
>    PERL        Path to Perl parser
>  
>  Use these variables to override the choices made by `configure' or to help
> @@ -1800,6 +1804,7 @@ ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
>  
>  
>  
> +
>  case "$host_os" in
>  *freebsd*) XENSTORED_KVA=/dev/xen/xenstored ;;
>  *) XENSTORED_KVA=/proc/xen/xsd_kva ;;
> @@ -1812,6 +1817,53 @@ case "$host_os" in
>  esac
>  
>  
> +# ===========================================================================
> +#     https://www.gnu.org/software/autoconf-archive/ax_python_module.html
> +# ===========================================================================
> +#
> +# SYNOPSIS
> +#
> +#   AX_PYTHON_MODULE(modname[, fatal, python])
> +#
> +# DESCRIPTION
> +#
> +#   Checks for Python module.
> +#
> +#   If fatal is non-empty then absence of a module will trigger an error.
> +#   The third parameter can either be "python" for Python 2 or "python3" for
> +#   Python 3; defaults to Python 3.
> +#
> +# LICENSE
> +#
> +#   Copyright (c) 2008 Andrew Collier
> +#
> +#   Copying and distribution of this file, with or without modification, are
> +#   permitted in any medium without royalty provided the copyright notice
> +#   and this notice are preserved. This file is offered as-is, without any
> +#   warranty.
> +
> +#serial 9
> +
> +# This is what autoupdate's m4 run will expand.  It fires
> +# the warning (with _au_warn_XXX), outputs it into the
> +# updated configure.ac (with AC_DIAGNOSE), and then outputs
> +# the replacement expansion.
> +
> +
> +# This is an auxiliary macro that is also run when
> +# autoupdate runs m4.  It simply calls m4_warning, but
> +# we need a wrapper so that each warning is emitted only
> +# once.  We break the quoting in m4_warning's argument in
> +# order to expand this macro's arguments, not AU_DEFUN's.
> +
> +
> +# Finally, this is the expansion that is picked up by
> +# autoconf.  It tells the user to run autoupdate, and
> +# then outputs the replacement expansion.  We do not care
> +# about autoupdate's warning because that contains
> +# information on what to do *after* running autoupdate.
> +
> +
>  
>  
>  test "x$prefix" = "xNONE" && prefix=$ac_default_prefix
> @@ -2232,6 +2284,212 @@ $as_echo "$as_me: WARNING: pandoc is not available so some documentation won't b
>  fi
>  
>  
> +# If sphinx is installed, make sure to have also the dependencies to build
> +# Sphinx documentation.
> +for ac_prog in sphinx-build
> +do
> +  # Extract the first word of "$ac_prog", so it can be a program name with args.
> +set dummy $ac_prog; ac_word=$2
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> +$as_echo_n "checking for $ac_word... " >&6; }
> +if ${ac_cv_prog_SPHINXBUILD+:} false; then :
> +  $as_echo_n "(cached) " >&6
> +else
> +  if test -n "$SPHINXBUILD"; then
> +  ac_cv_prog_SPHINXBUILD="$SPHINXBUILD" # Let the user override the test.
> +else
> +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> +for as_dir in $PATH
> +do
> +  IFS=$as_save_IFS
> +  test -z "$as_dir" && as_dir=.
> +    for ac_exec_ext in '' $ac_executable_extensions; do
> +  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
> +    ac_cv_prog_SPHINXBUILD="$ac_prog"
> +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> +    break 2
> +  fi
> +done
> +  done
> +IFS=$as_save_IFS
> +
> +fi
> +fi
> +SPHINXBUILD=$ac_cv_prog_SPHINXBUILD
> +if test -n "$SPHINXBUILD"; then
> +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SPHINXBUILD" >&5
> +$as_echo "$SPHINXBUILD" >&6; }
> +else
> +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +$as_echo "no" >&6; }
> +fi
> +
> +
> +  test -n "$SPHINXBUILD" && break
> +done
> +test -n "$SPHINXBUILD" || SPHINXBUILD="no"
> +
> +    if test "x$SPHINXBUILD" = xno; then :
> +  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: sphinx-build is not available so sphinx documentation \
> +won't be built" >&5
> +$as_echo "$as_me: WARNING: sphinx-build is not available so sphinx documentation \
> +won't be built" >&2;}
> +else
> +
> +            # Extract the first word of "sphinx-build", so it can be a program name with args.
> +set dummy sphinx-build; ac_word=$2
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> +$as_echo_n "checking for $ac_word... " >&6; }
> +if ${ac_cv_path_SPHINXBUILD+:} false; then :
> +  $as_echo_n "(cached) " >&6
> +else
> +  case $SPHINXBUILD in
> +  [\\/]* | ?:[\\/]*)
> +  ac_cv_path_SPHINXBUILD="$SPHINXBUILD" # Let the user override the test with a path.
> +  ;;
> +  *)
> +  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> +for as_dir in $PATH
> +do
> +  IFS=$as_save_IFS
> +  test -z "$as_dir" && as_dir=.
> +    for ac_exec_ext in '' $ac_executable_extensions; do
> +  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
> +    ac_cv_path_SPHINXBUILD="$as_dir/$ac_word$ac_exec_ext"
> +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> +    break 2
> +  fi
> +done
> +  done
> +IFS=$as_save_IFS
> +
> +  ;;
> +esac
> +fi
> +SPHINXBUILD=$ac_cv_path_SPHINXBUILD
> +if test -n "$SPHINXBUILD"; then
> +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SPHINXBUILD" >&5
> +$as_echo "$SPHINXBUILD" >&6; }
> +else
> +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +$as_echo "no" >&6; }
> +fi
> +
> +
> +
> +
> +    # Extract the first word of "doxygen", so it can be a program name with args.
> +set dummy doxygen; ac_word=$2
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> +$as_echo_n "checking for $ac_word... " >&6; }
> +if ${ac_cv_path_DOXYGEN+:} false; then :
> +  $as_echo_n "(cached) " >&6
> +else
> +  case $DOXYGEN in
> +  [\\/]* | ?:[\\/]*)
> +  ac_cv_path_DOXYGEN="$DOXYGEN" # Let the user override the test with a path.
> +  ;;
> +  *)
> +  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> +for as_dir in $PATH
> +do
> +  IFS=$as_save_IFS
> +  test -z "$as_dir" && as_dir=.
> +    for ac_exec_ext in '' $ac_executable_extensions; do
> +  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
> +    ac_cv_path_DOXYGEN="$as_dir/$ac_word$ac_exec_ext"
> +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> +    break 2
> +  fi
> +done
> +  done
> +IFS=$as_save_IFS
> +
> +  ;;
> +esac
> +fi
> +DOXYGEN=$ac_cv_path_DOXYGEN
> +if test -n "$DOXYGEN"; then
> +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOXYGEN" >&5
> +$as_echo "$DOXYGEN" >&6; }
> +else
> +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +$as_echo "no" >&6; }
> +fi
> +
> +
> +    if ! test -x "$ac_cv_path_DOXYGEN"; then :
> +
> +        as_fn_error $? "doxygen is needed" "$LINENO" 5
> +
> +fi
> +
> +
> +    if test -z $PYTHON;
> +    then
> +        if test -z "";
> +        then
> +            PYTHON="python3"
> +        else
> +            PYTHON=""
> +        fi
> +    fi
> +    PYTHON_NAME=`basename $PYTHON`
> +    { $as_echo "$as_me:${as_lineno-$LINENO}: checking $PYTHON_NAME module: breathe" >&5
> +$as_echo_n "checking $PYTHON_NAME module: breathe... " >&6; }
> +    $PYTHON -c "import breathe" 2>/dev/null
> +    if test $? -eq 0;
> +    then
> +        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
> +$as_echo "yes" >&6; }
> +        eval HAVE_PYMOD_BREATHE=yes
> +    else
> +        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +$as_echo "no" >&6; }
> +        eval HAVE_PYMOD_BREATHE=no
> +        #
> +        if test -n "yes"
> +        then
> +            as_fn_error $? "failed to find required module breathe" "$LINENO" 5
> +            exit 1
> +        fi
> +    fi
> +
> +
> +    if test -z $PYTHON;
> +    then
> +        if test -z "";
> +        then
> +            PYTHON="python3"
> +        else
> +            PYTHON=""
> +        fi
> +    fi
> +    PYTHON_NAME=`basename $PYTHON`
> +    { $as_echo "$as_me:${as_lineno-$LINENO}: checking $PYTHON_NAME module: sphinx_rtd_theme" >&5
> +$as_echo_n "checking $PYTHON_NAME module: sphinx_rtd_theme... " >&6; }
> +    $PYTHON -c "import sphinx_rtd_theme" 2>/dev/null
> +    if test $? -eq 0;
> +    then
> +        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
> +$as_echo "yes" >&6; }
> +        eval HAVE_PYMOD_SPHINX_RTD_THEME=yes
> +    else
> +        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> +$as_echo "no" >&6; }
> +        eval HAVE_PYMOD_SPHINX_RTD_THEME=no
> +        #
> +        if test -n "yes"
> +        then
> +            as_fn_error $? "failed to find required module sphinx_rtd_theme" "$LINENO" 5
> +            exit 1
> +        fi
> +    fi
> +
> +
> +
> +fi
> +
>  
>  # Extract the first word of "perl", so it can be a program name with args.
>  set dummy perl; ac_word=$2
> diff --git a/docs/configure.ac b/docs/configure.ac
> index c2e5edd3b3..a2ff55f30a 100644
> --- a/docs/configure.ac
> +++ b/docs/configure.ac
> @@ -20,6 +20,7 @@ m4_include([../m4/docs_tool.m4])
>  m4_include([../m4/path_or_fail.m4])
>  m4_include([../m4/features.m4])
>  m4_include([../m4/paths.m4])
> +m4_include([../m4/ax_python_module.m4])
>  
>  AX_XEN_EXPAND_CONFIG()
>  
> @@ -29,6 +30,20 @@ AX_DOCS_TOOL_PROG([POD2HTML], [pod2html])
>  AX_DOCS_TOOL_PROG([POD2TEXT], [pod2text])
>  AX_DOCS_TOOL_PROG([PANDOC], [pandoc])
>  
> +# If sphinx is installed, make sure to have also the dependencies to build
> +# Sphinx documentation.
> +AC_CHECK_PROGS([SPHINXBUILD], [sphinx-build], [no])
> +    AS_IF([test "x$SPHINXBUILD" = xno],
> +        [AC_MSG_WARN(sphinx-build is not available so sphinx documentation \
> +won't be built)],
> +        [
> +            AC_PATH_PROG([SPHINXBUILD], [sphinx-build])
> +            AX_DOCS_TOOL_REQ_PROG([DOXYGEN], [doxygen])
> +            AX_PYTHON_MODULE([breathe],[yes])
> +            AX_PYTHON_MODULE([sphinx_rtd_theme], [yes])
> +        ]
> +    )
> +
>  AC_ARG_VAR([PERL], [Path to Perl parser])
>  AX_PATH_PROG_OR_FAIL([PERL], [perl])
>  
> diff --git a/docs/xen-doxygen/customdoxygen.css b/docs/xen-doxygen/customdoxygen.css
> new file mode 100644
> index 0000000000..4735e41cf5
> --- /dev/null
> +++ b/docs/xen-doxygen/customdoxygen.css
> @@ -0,0 +1,36 @@
> +/* Custom CSS for Doxygen-generated HTML
> + * Copyright (c) 2015 Intel Corporation
> + * SPDX-License-Identifier: Apache-2.0
> + */
> +
> +code {
> +  font-family: Monaco,Menlo,Consolas,"Courier New",monospace;
> +  background-color: #D8D8D8;
> +  padding: 0 0.25em 0 0.25em;
> +}
> +
> +pre.fragment {
> +  display: block;
> +  font-family: Monaco,Menlo,Consolas,"Courier New",monospace;
> +  padding: 1rem;
> +  word-break: break-all;
> +  word-wrap: break-word;
> +  white-space: pre;
> +  background-color: #D8D8D8;
> +}
> +
> +#projectlogo
> +{
> +  vertical-align: middle;
> +}
> +
> +#projectname
> +{
> +  font: 200% Tahoma, Arial,sans-serif;
> +  color: #3D578C;
> +}
> +
> +#projectbrief
> +{
> +  color: #3D578C;
> +}
> diff --git a/docs/xen-doxygen/doxy-preprocessor.py b/docs/xen-doxygen/doxy-preprocessor.py
> new file mode 100755
> index 0000000000..496899d8e6
> --- /dev/null
> +++ b/docs/xen-doxygen/doxy-preprocessor.py
> @@ -0,0 +1,110 @@
> +#!/usr/bin/python3
> +#
> +# Copyright (c) 2021, Arm Limited.
> +#
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +
> +import os, sys, re
> +
> +
> +# Variables that holds the preprocessed header text
> +output_text = ""
> +header_file_name = ""
> +
> +# Variables to enumerate the anonymous structs/unions
> +anonymous_struct_count = 0
> +anonymous_union_count = 0
> +
> +
> +def error(text):
> +    sys.stderr.write("{}\n".format(text))
> +    sys.exit(1)
> +
> +
> +def write_to_output(text):
> +    sys.stdout.write(text)
> +
> +
> +def insert_doxygen_header(text):
> +    # Here the strategy is to insert the #include <doxygen_include.h> in the
> +    # first line of the header
> +    abspath = os.path.dirname(os.path.abspath(__file__))
> +    text += "#include \"{}/doxygen_include.h\"\n".format(abspath)
> +
> +    return text
> +
> +
> +def enumerate_anonymous(match):
> +    global anonymous_struct_count
> +    global anonymous_union_count
> +
> +    if "struct" in match.group(1):
> +        label = "anonymous_struct_%d" % anonymous_struct_count
> +        anonymous_struct_count += 1
> +    else:
> +        label = "anonymous_union_%d" % anonymous_union_count
> +        anonymous_union_count += 1
> +
> +    return match.group(1) + " " + label + " {"
> +
> +
> +def manage_anonymous_structs_unions(text):
> +    # Match anonymous unions/structs with this pattern:
> +    # struct/union {
> +    #     [...]
> +    #
> +    # and substitute it in this way:
> +    #
> +    # struct anonymous_struct_# {
> +    #     [...]
> +    # or
> +    # union anonymous_union_# {
> +    #     [...]
> +    # where # is a counter starting from zero, different between structs and
> +    # unions
> +    #
> +    # We don't count anonymous union/struct that are part of a typedef because
> +    # they don't create any issue for doxygen
> +    text = re.sub(
> +        "(?<!typedef\s)(struct|union)\s+?\{",
> +        enumerate_anonymous,
> +        text,
> +        flags=re.S
> +    )
> +
> +    return text
> +
> +
> +def main(argv):
> +    global output_text
> +    global header_file_name
> +
> +    if len(argv) != 1:
> +        error("Script called without arguments!")
> +
> +    header_file_name = argv[0]
> +
> +    # Open header file
> +    input_header_file = open(header_file_name, 'r')
> +    # Read all lines
> +    lines = input_header_file.readlines()
> +
> +    # Inject config.h and some defines in the current header, during compilation
> +    # this job is done by the -include argument passed to the compiler.
> +    output_text = insert_doxygen_header(output_text)
> +
> +    # Load file content in a variable
> +    for line in lines:
> +        output_text += "{}".format(line)
> +
> +    # Try to get rid of any anonymous union/struct
> +    output_text = manage_anonymous_structs_unions(output_text)
> +
> +    # Final stage of the preprocessor, print the output to stdout
> +    write_to_output(output_text)
> +
> +
> +if __name__ == "__main__":
> +    main(sys.argv[1:])
> +    sys.exit(0)
> diff --git a/docs/xen-doxygen/doxy_input.list b/docs/xen-doxygen/doxy_input.list
> new file mode 100644
> index 0000000000..e69de29bb2
> diff --git a/docs/xen-doxygen/doxygen_include.h.in b/docs/xen-doxygen/doxygen_include.h.in
> new file mode 100644
> index 0000000000..df284f3931
> --- /dev/null
> +++ b/docs/xen-doxygen/doxygen_include.h.in
> @@ -0,0 +1,32 @@
> +/*
> + * Doxygen include header
> + * It supplies the xen/include/xen/config.h that is included using the -include
> + * argument of the compiler in Xen Makefile.
> + * Other macros are defined because they are usually provided by the compiler.
> + *
> + * Copyright (C) 2021 ARM Limited
> + *
> + * Author: Luca Fancellu <luca.fancellu@arm.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +#include "@XEN_BASE@/xen/include/xen/config.h"
> +
> +#if defined(CONFIG_X86_64)
> +
> +#define __x86_64__ 1
> +
> +#elif defined(CONFIG_ARM_64)
> +
> +#define __aarch64__ 1
> +
> +#elif defined(CONFIG_ARM_32)
> +
> +#define __arm__ 1
> +
> +#else
> +
> +#error Architecture not supported/recognized.
> +
> +#endif
> diff --git a/docs/xen-doxygen/footer.html b/docs/xen-doxygen/footer.html
> new file mode 100644
> index 0000000000..a24bf2b9b4
> --- /dev/null
> +++ b/docs/xen-doxygen/footer.html
> @@ -0,0 +1,21 @@
> +<!-- HTML footer for doxygen 1.8.13-->
> +<!-- start footer part -->
> +<!--BEGIN GENERATE_TREEVIEW-->
> +<div id="nav-path" class="navpath"><!-- id is needed for treeview function! -->
> +  <ul>
> +    $navpath
> +    <li class="footer">$generatedby
> +    <a href="http://www.doxygen.org/index.html">
> +    <img class="footer" src="$relpath^doxygen.png" alt="doxygen"/></a> $doxygenversion </li>
> +  </ul>
> +</div>
> +<!--END GENERATE_TREEVIEW-->
> +<!--BEGIN !GENERATE_TREEVIEW-->
> +<hr class="footer"/><address class="footer"><small>
> +$generatedby &#160;<a href="http://www.doxygen.org/index.html">
> +<img class="footer" src="$relpath^doxygen.png" alt="doxygen"/>
> +</a> $doxygenversion
> +</small></address>
> +<!--END !GENERATE_TREEVIEW-->
> +</body>
> +</html>
> diff --git a/docs/xen-doxygen/header.html b/docs/xen-doxygen/header.html
> new file mode 100644
> index 0000000000..83ac2f1835
> --- /dev/null
> +++ b/docs/xen-doxygen/header.html
> @@ -0,0 +1,56 @@
> +<!-- HTML header for doxygen 1.8.13-->
> +<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> +<html xmlns="http://www.w3.org/1999/xhtml">
> +<head>
> +<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
> +<meta http-equiv="X-UA-Compatible" content="IE=9"/>
> +<meta name="generator" content="Doxygen $doxygenversion"/>
> +<meta name="viewport" content="width=device-width, initial-scale=1"/>
> +<!--BEGIN PROJECT_NAME--><title>$projectname: $title</title><!--END PROJECT_NAME-->
> +<!--BEGIN !PROJECT_NAME--><title>$title</title><!--END !PROJECT_NAME-->
> +<link href="$relpath^tabs.css" rel="stylesheet" type="text/css"/>
> +<script type="text/javascript" src="$relpath^jquery.js"></script>
> +<script type="text/javascript" src="$relpath^dynsections.js"></script>
> +$treeview
> +$search
> +$mathjax
> +<link href="$relpath^$stylesheet" rel="stylesheet" type="text/css" />
> +$extrastylesheet
> +</head>
> +<body>
> +<div id="top"><!-- do not remove this div, it is closed by doxygen! -->
> +
> +<!--BEGIN TITLEAREA-->
> +<div id="titlearea">
> +<table cellspacing="0" cellpadding="0">
> + <tbody>
> + <tr style="height: 56px;">
> +  <!--BEGIN PROJECT_LOGO-->
> +  <td id="projectlogo"><img alt="Logo" src="$relpath^$projectlogo"/></td>
> +  <!--END PROJECT_LOGO-->
> +  <!--BEGIN PROJECT_NAME-->
> +  <td id="projectalign" style="padding-left: 1em;">
> +   <div id="projectname">$projectname
> +   <!--BEGIN PROJECT_NUMBER-->&#160;<span id="projectnumber">$projectnumber</span><!--END PROJECT_NUMBER-->
> +   </div>
> +   <!--BEGIN PROJECT_BRIEF--><div id="projectbrief">$projectbrief</div><!--END PROJECT_BRIEF-->
> +  </td>
> +  <!--END PROJECT_NAME-->
> +  <!--BEGIN !PROJECT_NAME-->
> +   <!--BEGIN PROJECT_BRIEF-->
> +    <td style="padding-left: 0.5em;">
> +    <div id="projectbrief">$projectbrief</div>
> +    </td>
> +   <!--END PROJECT_BRIEF-->
> +  <!--END !PROJECT_NAME-->
> +  <!--BEGIN DISABLE_INDEX-->
> +   <!--BEGIN SEARCHENGINE-->
> +   <td>$searchbox</td>
> +   <!--END SEARCHENGINE-->
> +  <!--END DISABLE_INDEX-->
> + </tr>
> + </tbody>
> +</table>
> +</div>
> +<!--END TITLEAREA-->
> +<!-- end header part -->
> diff --git a/docs/xen-doxygen/mainpage.md b/docs/xen-doxygen/mainpage.md
> new file mode 100644
> index 0000000000..ff548b87fc
> --- /dev/null
> +++ b/docs/xen-doxygen/mainpage.md
> @@ -0,0 +1,5 @@
> +# API Documentation   {#index}
> +
> +## Introduction
> +
> +## Licensing
> diff --git a/docs/xen-doxygen/xen_project_logo_165x67.png b/docs/xen-doxygen/xen_project_logo_165x67.png
> new file mode 100644
> index 0000000000000000000000000000000000000000..7244959d59cdeb9f23c5202160ea45508dfc7265
> GIT binary patch
> literal 18223
> zcmV+NKn=f%P)<h;3K|Lk000e1NJLTq005-`002V>1^@s6{Wir#00004XF*Lt006O$
> zeEU(80000WV@Og>004&%004{+008|`004nN004b?008NW002DY000@xb3BE2000U(
> zX+uL$P-t&-Z*ypGa3D!TLm+T+Z)Rz1WdHz3$DNjUR8-d%htIutdZEoQ0#b(FyTAa_
> zdy`&8VVD_UC<6{NG_fI~0ue<-nj%P0#DLLIBvwSR5EN9f2P6n6F&ITuEN@2Ei>|D^
> z_ww@l<E(G(v-i3C?7h!g7XXr{FPE1FO97C|6YzsPoaqsfQFQD8fB_z0fGGe>Rz|vC
> zuzLs)$;-`!o*{AqUjza0dRV*yaMRE;fKCVhpQKsoe1Yhg01=zBIT<Vw7l=3|OOP(M
> z&x)8Dmn>!&C1$=TK@rP|Ibo3vKKm@PqnO#LJhq6%Ij6Hz*<$V$@wQAMN5qJ)hzm2h
> zoGcOF60t^#FqJFfH{#e-4l@G)6iI9sa9D{VHW4w29}?su;^hF~NC{tY+*d5%WDCTX
> za!E_i;d2ub1#}&jF5T4HnnCyEWTkKf0>c0%E1Ah>(_PY1)0w;+02c53Su*0<(nUqK
> zG_|(0G&D0Z{i;y^b@OjZ+}lNZ8Th$p5Uu}<?XUdO8USF-iE6X+i!H7SfX*!d$ld#5
> z(>MTtq^NHl*T1?CO*}7&0ztZsv2j*bmJyf3G7=Z`5B*PvzoD<bXCyxEkMhu6Iq^(k
> zihwSz8!Ig(O~|Kbq%&C@y5XOP_#X%Ubsh#moOlkO!xKe>iKdLpOAxi2$L0#SX*@cY
> z_n(^h55xYX#km%V()bZjV~l{*bt*u9?FT3d5g^g~#a;iSZ@&02Abxq_DwB(I|L-^b
> zXThc7C4-yrInE_0gw7K3GZ**7&k~>k0Z0NWkO#^@9q0f<U<Ry!EpP;Gz#I635D*Dg
> z0~SaGseli%Kpxlx3PCa03HE?$PzM@8GiU|JK_@r`&Vx(f8n^*&gZp3<On_%#7Q6-v
> z5CmZ%GDLyoAr(jy(ud3-24oMpLB3EB6bZ#b2@nqwLV3_;s2D1Ps-b$Q8TuYN37v<o
> zK!ea-XbhT$euv({2uy;huoA2V8^a9P3HE_Q;8kz}yavvN3*a4aCENfXg*)K$@HO~0
> zJPJR9=MaDp5gMY37$OYB1@T9ska&cTtVfEF3ZwyPMY@qb<R&tT%ph-37!(CXM;W4Q
> zQJ$z!6brQmwH{T1szx0~b)b4tH&J7#S=2`~8Lf!cN86yi&=KeabQZc0U4d>wx1%qj
> zZ=)yBuQ3=54Wo^*!gyjLF-e%Um=erBOdIALW)L%unZshS@>qSW9o8Sq#0s#5*edK%
> z>{;v(b^`kbN5rY%%y90wC>#%$kE_5P!JWYk;U;klcqzOl-UjcFXXA75rT9jCH~u<)
> z0>40zCTJ7v2qA<d!X`o`p_Oov@PP1=NF=Het%-p|E^#BVl6Z`GnK(v#OOhe!kz7d8
> zBq3=B=@980=`QIdnM~FqJCdWw0`d-WGx-Af5&4Y-MZ!qJOM)%2L83;YLt;qcxg=gv
> zQ_@LtwPdbjh2#mz>yk54cquI@7b&LHdZ`+zlTss6bJ7%PQ)z$cROu4wBhpu-r)01)
> zS~6}jY?%U?gEALn#wiFzo#H}aQ8rT=DHkadR18&{>P1bW7E`~Y4p3)hWn`DhhRJ5j
> z*2tcg9i<^OEt(fCg;q*CP8+7ZTcWhYX$fb^_9d-LhL+6BEtPYW<H!}swaML<dnZqq
> zcau++-zDEE|4;#?pr;V1kfpF+;iAIKQtDFMrL3hzOOG$TrwA+RDF!L7RXnKJuQ;cq
> ztmL7Tu2iLTL1{*rrtGMkq+G6iMtNF=qGGSYRVi0FtMZgCOLwBD&@1V^^jTF!RZmr+
> zYQ5@!>VlfKTBusSTASKKb%HuWJzl+By+?gkLq)?+BTu76<DMp7lcAZYxmUAKb6!hZ
> zD_m=<R;SjKww$(?cCL1d_5&TVj)Tq`od%s-x)@!CZnEw^-5Ywao`qhbUX9*$eOTX8
> zpR2!5f6xGJU~RxNXfPNtBpEsxW*W8_jv3L6e2wyrI*pziYZylv?=tQ){%B%hl48<m
> za^F<O)Y~-QwA=J|Gd(kwS&i8(bF#U+`3CbY^B2qXmvNTuUv|fWV&P}8)uPAZgQb-v
> z-?G(m+DgMJ)~eQOgh6ElFiIGgt<l!b)*Gx(S--Whv=P`GxB1Q1&^Foji0#yJ?d6>1
> zjmyXF)a;mc^>(B7bo*HQ1NNg1st!zt28YLv>W*y3CdWx9U8f|cqfXDAO`Q48?auQq
> zHZJR2&bcD49<D{M18y>Ip>EY~kKEPV6Wm+eXFV)D)_R=tM0@&p?(!V*Qu1PXHG9o^
> zTY0bZ?)4%01p8F`JoeS|<@<K~!G7L;yZs)l&|JY=(diHTz5I9kKMc?gSQGGLASN&%
> zuqN<HkZDj}P+u@5I41Z=@aqugkkXL*p*o?$(4H{Ku;{Snu=#M;@UrmH2;+!#5!WIW
> zBDs-WQP`-ksHUj7m2NBdtel9ph%SsCUZuS%d)1ZI3ae9ApN^4?VaA+@MaPE69*KR=
> z^k+6O=i<ELYU5^EF08$*XKY7yIeVI8$0_4X#@of0#ZM*JCG1X^PIO4DNSxuiaI3j5
> zl01{@lID~BlMf|-N(oPCOU0$erk>=<@RE7GY07EYX@lwd>4oW|Yi!o+Su@M`;WuSK
> z8LKk71XR(_RKHM1xJ5XYX`fk>`6eqY>qNG6HZQwBM=xi4&Sb88?zd}EYguc1@>KIS
> z<&CX#T35dwS|7K*XM_5Nf(;WJJvJWRMA($P>8E^?{IdL4o5MGE7bq2MEEwP7v8AO@
> zqL5!WvekBL-8R%V?zVyL=G&{be=K4bT`e{#t|)$A!YaA?jp;X)-+bB;zhj`(vULAW
> z%ue3U;av{94wp%n<(7@__S@Z2PA@Mif3+uO&y|X06?J<Fdxd*PD}5`wsx+#0R=uxI
> ztiE02T+>#oSi8M;ejj_^(0<4Lt#wLu#dYrva1Y$6_o(k^&}yhSh&h;f@JVA>W8b%o
> zZ=0JGnu?n~9O4}sJsfnnx7n(>`H13?(iXTy*fM=I`sj`CT)*pTHEgYKqqP+u1IL8N
> zo_-(u{qS+0<2@%BCt82d{Gqm;(q7a7b>wu+b|!X?c13m#p7cK1({0<`{-e>4hfb-U
> zsyQuty7Ua;Ou?B?XLHZaol8GAb3Wnxcu!2v{R<HnZuJKC4qWuPc=?k1r3-ydeP=J*
> zT|RZi=E}*djH{j3EU$I+TlBa8Wbsq`faO5Pb*t-LH>_`T4=x`(GvqLI{-*2AOSimk
> zUAw*F_TX^n@STz9k<mNsJ5zU4?!LH}d2iwV#s}yJMGvJORy<OC)bO+J&uycYqo>DQ
> z$NC=!KfXWC8h`dn#xL(D3Z9UkR7|Q&Hcy#Notk!^zVUSB(}`#4&lYA1f0h2V_PNgU
> zAAWQEt$#LRcH#y9#i!p(Udq2b^lI6wp1FXzN3T;~FU%Lck$-deE#qz9yYP3D3t8{6
> z?<+s(e(3(_^YOu_)K8!O1p}D#{JO;G(*OVf32;bRa{vGf4*&oQ4*`<-1El}}02*{f
> zSaefwW^{L9a%BKeVQFr3E>1;MAa*k@H7+qQF!XYv002BXNkl<ZcwX&&2Ur%z_P#e7
> z6Qi+fqA~V@E%vU7y^D&10wPTTDJm);MHEC76-DVCL_kmw?7jDbz4s2N*c<Kq-*@37
> z#Au5Dn|t;CJm2#^yWj4#-8pmSoS8GTMLrU$3Dg1V0S)qxwSgKyRp2vyrhkMg0%Wkd
> zKntJ?&<p4b^aln21A#&LNB-{z@P1FA6VMc>1$+-w06x=a`rA|vr~**(wFP<rWHvJ1
> z+fW~4G{)LwjHRuWrIk&K7A;2c+FM}=GH^GbB|rwP43q&r(`WiaDhp7WH3WVE3K+3O
> zi4q#qr%!j?xN+0UGiS~ozkBEIovf@Z$;`}>#~E32=hh>6`k4PSh1Z`vdHU@7wd+^*
> z?%lU7ARy4EXV0EvkdBI3DMdQ~?D{JKrGd}%nSMu<T$GGI14?&XzI^%No}LTlpE-Rt
> z<;|PSY>>im&!4}Ld-qc1+`03zf8TytnYc<qg2QFa>h*H?@DaIi{(_{Yrpb#JFO=|E
> zS&WyBYw34aC9jU}(WB>Bq)!HAH&01S-IQv=XXgA&3Y7=gowf(q#gZ8{6ILWFefi?m
> zi=3QX0Yl2ehmXK)mt@z@J(7@+D3Oto;^X5hvuDqiY15{Ot*xy<lFGb!^CU1ZP-3EE
> zWYwxwvTxr3xpe7@JbLs*NhdoyM{=@r1&n@V`0(LY$dAm~2WSQS2vBwS2KY?>M~Pi0
> zyJ{LP>{f?_hJ^ZOJbd&pCtJWoSqd}Vx^-JFT(}^|jvWJ&?UVKE*GpVnoP>mg$btn6
> z#MRYRoSd9w)~s2wXwf1G4GmT9uUofHcJACMM~)m(q$;H=r7RgUH%EZnoC60AZ12*g
> zi>hm<?n*13#!yM%GyNYTc9XQIX-!i)4t92);db|K>g{Yuu}m=I^Jg!?kdGxJ;}N9f
> zLon1mxpL)-!eC@hV)N$Bl9-q$HOYuPMn^}>#*G_g|Ni}Q>eMMoNlB3tCr-%Kt5+pG
> zJzbtXd!}^hxw%q6Z$O(iZAz|MwdzQeh5BY=fDPs|WBwl@TD;W(4%JY19GaB4CNc9(
> zj=X-IDNmm~lSdhk!IaMxqa_#IL*0-Jb?Ve<*}8SBczJor`0?XKPft$<4<0PNdi4@W
> zJL%rNy9^jGKr}Tq#n8}Drc9Y4OO`B=-Me?o_3Jla{5+9YuU<(`4#ec!1SY+E_wLO;
> zefn6SOl&C4fbW1(z-Rg&CQ3*e6|}6?t5m6?bNJBllxI(0%Hzk+APv*xe)@fMvCkDg
> zfdG@+w{I)bjuJ6EJY2lJy~V}FMXar@MPFZEh7KJny?ghTK7IO1zkdBiU0q#9j2Iy%
> zCMF6~y1BW@;>C-VxLdYtQKT&;<=e#WoV@zv@zZCMCQX`w@=={=18_9pGh_ab(zgI5
> zq{5KhyY;lVaQ^C@jEtv}mYObCuUu2QXi7yg<;|Nnm9Co1xMIZ$S+;DM!dQO3{^IB`
> zJ=Z|rI9o?&RF<xe?kgiBqvvL3X3xNg&kPI<UXB_yI!jN_AZv`VY4)sH9=V~RVM@22
> zl$0bJHf&JzQb@&ob|f?AD2z&7Q&AsYXJ>~5hlZe>LjW=+M+QE3<^N;E3jG1-45({q
> zYTI49c;i`m+5@?M?WUYPdrofL$m?Ej-MXbPV@ynp0vap{2?^rk?U!w3W&Og`)HD@F
> z&FO^;7j6#-2uO&ChzO63ja{^S`SN+d0x)kdbj!G)prDN~dX6|dJ6{LGKD4#5e-#(E
> zJcs%w^hZVSgps4D1srN(xBl|QOQ;ZU6f6Dps~lOgYQt)jmyF2)cMchSw#xs9h(-e?
> z&Y*T}J6N1Je(uT58@J`mnR9aZ@L@TB{=6a?j~+cLU@Qp^4i+$*BHe-lgR;#`&F+B_
> zkDwcl0mIEmPEOX}yLayZ#Os!kk<kgdXFCYIHbC2#FJE?q6#V(@*|WV49z3WC2AqI2
> zef|CYx7yp=UqaXXaMh|+xog+16{I68SFThHB1&ka1tz@@!zx3bK79e*_N4^+M?|CC
> zg8>>p94`7A_)MQT(Xin#OaH1>f6(8yWpC=GOIM*M9#@8Is4tQ!XpH#!`YQULpP!!u
> z2ZiRKJ5B{7?E^zCTC--2{^`@FyMcLHg83Q(wSj5?8U8nvf4vsa0B8mY+#Y!hg>;+_
> zD}4iW%?m&V8Ip{z=$o6j$b$zD6dm^Z_3M%f{WedMr-`$Zn=g{3Rn8e8>cw9HpXn1N
> zcH7h=y92`m1D700NjWLowr&@6xys-+CDzKsmCE3^gM)+2m@z}_Y#m>Y9z8k*U2iCu
> z)Er%MA9UgEAw8QQ9Zp4l`>%if>r2qTaQ>Hw3<@dQ77}#mx^?T^U@&b4)1M0q4a??O
> zCk-M>=rd=|$e}}rWbfX6N@F>C<hX3#y8m^H=B*r&3`Yytz-atXY8D2|#Rm8d%2pJ|
> z&-9TJ2ccU7LoCfFM{U@!4NSORJUl$a#>Pe_PoAs{?a+EAIK0!P%P%i*epy>vdn*i>
> zXhTE85HP48ENu@0hRkepb92YirAt#CC=15?f*Ji40%MlUXU+~MPMk1>L{8|^rOR18
> zJ-y6f!-mPAL4#!M*s;ni5od>-ojF4^UuHPFilxQGr~Uf%OGda59UUDn#F?)u6Jcy@
> z>}G9kJsD~SJ(EiQod)xn{&Per$?3zs)vMPu3k!*UwPVLlRQ3#6jBfh;wQJyy52wiJ
> z=mSW*Go(_fzsmrShV{I>yn3svt1m<so{^vA2h$}OX%~TA2M*jEpsqd?S^TZW@|pf~
> zL@7yWHr(EB=CKXyH^Ycop)e(-ViYXvOV_W-g{xQO<oR=wa_XcUIe9{k0z7{o&R)8x
> zFhWjFPOi4D?oy=Rv}n<y#hKxs5t$c63%XI)u3cwdzI^#H(>j0U@;mb)SRR&(;D46&
> z+~rG3*)QF=ro=sa`68wNm69b(+9K^1#flaC_A^s{e8h^U_jm7>E!xfSobMx>Hg1uH
> z3l}PL)n;a9^1}~5$lm??<=*}KayLC)uEW5%1nGJ4>Q%W6L*tK-@${*}nAdLKe$}v1
> zqp8T}M=-%3>T&r@LY=R}gb5R(pFMl_hG|@d)z5t2m5-`CJTlzPyLXlHrote)hce&7
> z|C1+A=4feYokO~AKriI;1MoHQx%>Xeh)VxYfaVw@t204?q2li!AfBF{io*mQCu-HI
> zC2DGFas?Hhp7Btgym+qQ;giSm;PE3c-V+6no;@vq>KgB>Xz$*=cae_<Q2u?4kk61D
> z0Pi0X5^^v<s-!)9pybUwRe7oMC|nMf>*>oE%6(o-y`QdF>6<of%4*oK;Sr=uhU|}g
> zY6Fy#pADUlj5v-*ukmgT)tXGRpX!pEup&`mM7otxTEb9~jvYJ7_uqdn0|yR#miFMj
> zJVNEa%zPu9m8P%6`#@rtOwJ4D)BO4KRr=*Og&C9QUwrWeyY`yZt5+X;@ZiB4`BCH<
> znCx|SmXa2!aQcPw%go7^7jIt4Q#P9C&*Wi7hB9Qdc=6&_Ft#=!Z5yZ$oskzMWC`GN
> zxBU?k4IDb_4$&B*y~AUUrvwHD%gmWG6{hs_^^+bwdMM5l9ou(G{pzc)b~-ydKL$zm
> zyBsC{0%c`o<!ESVa9U6e4Duxlk<Xkg%TF+9Jnr4Qm)GZi0OjQ7%Inv!mD!(j=g!d)
> zBp2!K0<57wwgtXJe#P_i{7fGqad5c_D$3AgjMcM{kZ_qc%~|nz<X9jbDY|v*CPRm6
> z<o4^=FQ8AKJ~I$DCN?(q1>MT%74#u=^XAPLwQJWNkG!jbIf~)PvBNHoj*f}1UcLIg
> z2gY9{&Wm%lhjZn-cI}ep&6~>)RjZ3ygGO7?0Qvw`07Zv{RHl?<PeJvC9!4Ca<p>19
> zbE*)fAkm9`3=GV2;6VMK<t0?(tsHCRz5f}aCwcpynzr(?w3s9zAz?COhKtgD)8&j3
> z5|*zF)6lwUV`DSU-rl}<<;s=E0Lgpy?8zbnd?;gX+qUgG^5&3?T8R=RhQ-Cj9nZh@
> zLBu(6N^nkr(pR%$#fs9qcOMxzKwZ=aX<b4-oPMP4Ot1B>fO>}x9V`tD4CYLlG$|PR
> z^J=Io>j-rBt4vKzeKa*Soe^#rK!;+E;gVs?fU)1JhmwIooJFGl0P~_#3-ja3&UX3N
> z=$l#?%>g=4Q<b7x@vr<mC^R@T)e#tkUc}bW(9pf`IPkDx!)QG6*|-{j2J0t1?yAx!
> z`}gWGaNFcbcCfa+6jw8L-|p`2ij?G#P{)p)=c1y!g@uLHXbnOfGf1KRmoHz=Wmoy3
> zj5%k{oWu3%)mwDp#EE<Pm;N>}Z@SIhhoyZDh8P%3%9k&%lsiw-_mukenq)R<(j;ug
> zj2WxfuU~)W%9ShksYc`{@u!rUn)+nt&Yc&1eSJ4}?%a7Yo}Ua>jm-Bp1K>ZIsj8)=
> zr6bCdcJ=Djbmm9w-o5)W^M4x~Hf%V(Wy_XhXc!)dOU7rtv_YB8{QdnmpE`Bw_RE(q
> zl@W+{5uQIA@9-A%^_Aaz^9>j9{gAJpe{xg;;5wI)n#1(&I63Ccim1A7yi`R>jvA$x
> zHDJI1&Ev<9*FSpnXc@fpvUp&&cKgAD2VWpF(82dZ2=Q`J;ji-l{%s;dqO!;|oR`m~
> zWJkFaAI-jf`zn&2&vEkP$^01q9)hlV50aE~?37>?@J<R0CY)1BwuMf<H$V7aB0dXx
> zr|pQV3kf}Y>(;I3$ZYwy|1#aUaU-LD|Nc%$rw)XzqO*TWL`hk_SkYoeqxDR(X1cnI
> zOMchQp&(W&nR0}d_7z=S-A>RUE8&@GF;mB)YZzBDdZ0^BfAr{)(tZ9XiTWe;TDs4z
> zS+gb!68B8Sij{KMZMSOG3JuIzVc7Q(nSg1qK`E|q2uq2}=lH9Vf8)lD=c-n%s*U$h
> z1@A=Z(s86OD(CEfbprj1q@$yA7}EIU-;v_)A{dG<)YR0>Q4Sh)pVSBgC1sszKh$tC
> zG%yp-`FV@FIG0R)l3h2^s#UvS3k!?-cvj9uE8P`9>y_(vxa>6$UHkK=PoFB4{C6l9
> zznntDMSn&N`})mm1$15GaL<AT3!bCP+K6(@uT`_w6EY+nHB|H_^NkXo$IPru1!Ov^
> z9jY#$R{GhqX9enrB6Z2245Run-|U=hB`(wAxr)x8Kc8NuN)>LZP#N!psvr#{i`%zv
> zE8Q*Qs=#=Kk(HgLluJeErr+6$ScbxRzD=t8ET8fpWe*7nIfHU^LYY1(FDY7bYCkn?
> z9WYAQ2s-2(MUSKd1_#c`kQ@#wS+dkHbVZf%tX~2uX+XxL70cxkTF~JVH*MaOdHe1i
> zx&QD%0Ukce_#GZ(Je2eY_Y2Nd;Z$*W?d|{f(o*Hto!fHl#&x;M>CTH6<jmPKTw=k&
> z_=u7vOLF<G6%2s~D(T3w+_-g9iFfDTT_ugQ`{@NB^KII+DO*EBBdtuCGDi`Accn^|
> zQlP4&K~2diTozTCQ`6JrZt6WHO+rP>;^NLD{x48#xD=yq%T}$t8D5o!3aV#PL6s)&
> zJ>moajw~C?e)IM%B@gDOdLM<;QlW79_>4^NHl7y^_6^FSU#wU$TIinyQKVB+Hfhtk
> z)AG@JW5A4a6^7*aB$<=?*zn<+)X}=c$H$kzyZ=o$0EYYmD2azw!(Wp+b?ffhzI%7h
> zNl2ZPQ>WxOq}2&XpLgNd>C;LWLUqogDh`jTG*X}s9yoeb_8vSaJNE36&D*z2d_qEY
> z^A;^mBHy{lUlT|5zWw^epc~G8imvz|!XHdYkt4^C7o?-YiTq<+Lc*JGOPA*O<$S;b
> z5>6jSOTY(Ab>Y<c^95!7UD;5kLrDMdv14-M?p^-RZP~gt*9y`4Z9i)C=xu2aA1dKh
> z&si9S(<F|bIH8o8&$xZpF4?$kn?%LN<|M9KmCI|#5J#1_DsEw@(p05&6y-Z};eyny
> zTh|rFSTza}l<T7>)fio~4(+<G)gL`Z=Fjs~7?Shd)GK@T>?wwZMjUwNFa}-8e)nK_
> z*rEW3NI0xv)4fNJbK7?A0`u&ZUHkUS?)?Ye3*Ik`x9{!PvrjqSzI%^s*s@htt=}L?
> zYu3t4_t~$?SE#TV`Po4-(f6}W^%^zo($dmiK6vs>wjlp)yLQXYy?OC@WLiA#IdD)x
> z%E{BxxJi>kh&vhO{~1sNIPKU7X>t)-`1(zovsn(tD_lm^k!fy4UfcPs_^&-`)EdO&
> z4jzM?oSm<vXFO5DsN((+Ht*Oe>o#qcgjK6^hiVLa`0cmfayoP?u(y4Oj;VYeRaoZz
> zHh7)oRAJA-LvrZoF=^De@nWRG=lUe{N-`LS44QZ9(0$9OQAP?=a$1qz<Qx*>Qdl#y
> zaoGq%@1gfT6dss{PX)9{F2i-#H!@D!unjMH%QjiNdFuyZ&897~X5(h%xN5^DiBC+D
> z*cFMQJ6iuC^5Bw(v5=6h(HJ;<GGK<=tSdC(lh<uj!YgSY{^|`#14mVwYd39`Qx~tu
> z`YqdEB3>de0pPlx-T=oUx%<XwAoA#$bJ^=QZ&T8E8_Xkl{YK?{!?qo=X~!-Zp`$~o
> zOC8(9CouTQ-Xkf>{ld>x7zNJ=EKgo7A(2rzU?Qpk{(u#pPZ#fW9L}R$X1PCSS>BaS
> zVJK+=49hZ=D_?#N8d;rBg(*p#1!&x{efKSTU`mfUbCo5r1SKWM`NoYKmxC}Il;zOE
> zd%FNUGz}jP7LNc{dk2NQiC?uwmL;wFV8pIWmS`~JQZS=mXhcrycI`O;&XzwMc~P>_
> z-L8JK7A+R<ICM0Z`Nbq8DRFs>AtNIVRa*SNeDzv6ef0)6Ovr|D^YqfCOBt#$L=|xD
> zA@AMFcp^*USG*UI%i<*h;CURFYRE9neSH3srAoOjO<0-ByqIU<XDSR;nON4y_~p`f
> zz`$FGKO0Qc56{*Js0naT-CBRl*gJpaeX5=r`AcwAOeW$^MH<zCPon!KvGp`)+xq9V
> zx;h3j8-@<o+xYwY(`iB(5*j<!gxxm>ifO^Ux3%F#@_zk_6)R3&vu4fRhgpIbogiVc
> z@gI!vWy^6~E-tg@Wqx0!%6_Cj9g?GWer3^Fn1)(cQ_Jxe_oSSX;H9w=8WSfWOP49f
> z!fC0l^E@Pa8PZ-Mu}N!W1te?I#;uYJ$-*O%uzr(7tw@rfs2K4JUm^h!OWz6qh$!(1
> zi4ecAB}(2s`t;q2@));l(>8(WheRV!pl~?~gZEgjV3cQ3U`P(6eiY)9AvyI*Ba*5S
> zhu(Db$C}<qgw%akIw~m7sH7P$K}%x9YO?JE#5F}49IpEKnUY3JzK&SCWs45Wb#?Nr
> z@1UR{W$g>4W&i&Dl??<ChFub!C4M)x#)k!wIT}N<&b)f{YR2OnkuX$BU}TI0E{Xjh
> z1Vw>?mL;IF<8n)U^9}VY2UHq|H~4~CVKlPnZ>j6-KIchf{7NN1e=y5C^ToA*$Y|y0
> z8y+RzA>lxT_=2GrCm=trUsx0vF-kf235^8PMJi$52JbQcqQFq`3JAfqNNLr!{aTb~
> z!cff-CpYXl@cy#omq)pebLM9?#qJ5>+Toe%0R^)}IC6e_l=W1{^yTX|y+1ty_xOwi
> z%h;n&KN^BVkOrrcKYjv376mBXsx)fYJV0}}t~feQld!NbWw|U@3=SMPP(jtI)l3nN
> zFNfWIfwaWK@|=v(aq{HJu`gb{$UJiXI$AB6DPBQn%<>OHSnLW}w_~4VWQ$C&wZDTr
> z%m7Nr!WG7qkrRTJEXxgxS)s%WiGF{cED!JdM?`~}!o<@zP!{+FgQ>#sKU}<k1^&Sb
> zc+P9@!s4JjFrKGRpv+zD4`z<eEmyt*RSP?7JIB;DJNBddq~v;cd3ZhV{j5;RGkExj
> z%ZRIuXX03=>iOt2!bNXZUjAXPmnJ~({FCS7F=#2IFY>PTWA!-1?SOPBP(FSFLly%#
> zrdIZcsx|C}Ym5>r%LxiIMny$Qe0;pJFpG=B3=PN7AgBhAi4|!HsYM2*XU(9<$jBo|
> zOSbG!k?^=giNecMVQJ!;LiqK1-o3Z){}!>y>*e;7Ou6$kQ-*43(-*QGDv2WoN`;{e
> zKb9?9&Lw8$x`Mp^DBb9lNHb}@jJ2Hbs!qN7x9T=fyHHQ9;aQ@7A-w&+@b$vsmGcH_
> zJU`l`S&Nk@78|d#PgvBOgbmvY%JgpJzXM>&@+4{6yybet{RPj(*&u~*&PHGVr{*m~
> zmaW==@~>6my*s^MpFINUc?E`1pLE4LYJhY;ovB9fQMts##LC5r7E>QOSSL$=w2?$c
> zL@GO7aFYRUNX5N>X3UtGhTvQ-OE)g|*JRE*jT<+%IC}J`GJ>42Zkt5L!6?CtSq5f`
> zNnEQi0MB_O<M0}fh5xI<ybUD`?yuUso5{<LLnpGDwQTK)eCy&JE3RZ<(3+LM``&|j
> zM#j^y$xE+rK84d?zGjmoZrCAOx}#H(PB1V9PzK%eL07to0I$>Y#{MsW;W(W~3%*bF
> z8a4gnR&A6xFp(<%cR^LY=!7*A616-Bmi9b6PZK;B->pJ8=jcdBjS)Hr_MSMe#8JJQ
> zcY)8nEO`SA!_{JK>qvca9MYgO^LuT9kB(5+<sLnH#KGRyy?PG5J3>oWSq8xc|6J$I
> zHQgE-8ZvdNJ%@!jRKn>q>L)FAbaWP_r>DQTl=?(MqtRucy9kR-1al<Ah)9%(xRuIz
> z1Q?a)s{g#laCz5M_h@}4{|3Cqusl!Nv{PYBbe&JimMd?9{5hXn6ct$=aPkXZn&Tf4
> z14CwcK^#?{zamNES8rA@+Sv3a(y&GvtpQr`1l`8C-OFHgb@jPinu})-`y(Js=!g*`
> zd^Jaov_?Ey$vt}aAGB@Nmc74uhPR<A504?yE5vS^>tn>7h%(ShF3{U?&Yo<@1RMKX
> zTMry7c&<NAGf7FapZd_#h^v7#J`H_RMX2X*ftnpUbZF7G^)I_dXz9r;H+O|8xj_{r
> zrk0i#odl$BpZ;?Zg)VCY=FFM1iQX$~p*ML2P|u2h;vWU&Iy&zd3WFgW1_l1}TmjA(
> z2S+O5RdEXL<%chfg1AbWOJ&9SZF2vW$aouvD=Y(04lkTTP!q;k+dQ4?9Uz{5AxhfJ
> zM^&DJw1BYKm2&*@J#qC|_z3ZA0M0~FC#Hp49~kWB=C)C30e^wwAbFX-fyp@PZtO|a
> z4NT0htlN1IMo`{+Q04s_;5y5<I5<icLN6UMeB@Qcr9N2+D6o>z;5g(p)_tMxOETM^
> zrOEq?f+CP^gw(22kLm;s!%st>R1w~5DWI08r)T?mbs8<y($tr6<18R0mnj=naqk{l
> z-*f|;GQ~E%RH;%ft5>hS$c_Je!eV9Sd>?UJ;3u;e1<IVoK{y5|$2s0Wq5r(ka18G<
> zcM-5yT<3W!*BJIU@d_h9uIjjQ%RbqB;H2~$q(S$t_UP`Y=jt?Q)a2MScTbr<XQ9mS
> zK>G8L{(Ntl>6uqP_l5rA?iHZqvwVG?)J3Dai0AS{eEnX%dO2{#<e@`{ZqemEC^}II
> zTR3mVpS92r@JE`yO8J?Wwf*!bUw>VKT|XtI@gzr=CthGS-e>;r1>S`#%IW6mD-E0c
> z#M!CtV4%YKB$=~jC8#I!eM4myo<sFa?*s2MUq?5OEW~w#KFJ>7)AOlB9sF?k@ZnCi
> zYSq#lqOS8?M_W%B7UIrn1n0tk`Q;aB)~p#lSe|W8xg^u(ERv}+=ZT~H0_EIkwwD5)
> zzx|&_`<e5_&SkFHx_HPG=h<R2eU8`?xaR1-uppc&eqpH6BAoHUHy%1Gi^F1b8a8RB
> z@@1qh7uKR}hnLn)Zb;u9>CYD18BE_p0rR$V1(f_2NND^zd7-f8uf+e6Nn6BazHdRk
> z3`;o70^B^s-fg~2MLJVZ_Q}Y{*lNnlij}{MLH^vdwMB_<zM1AQ%QM#=@8<0?{0_Kh
> zH^T$rJaWG%TGSJIdQ&h^VSSQ@WUDqEx@>Us3KAQHC*GMB!Sr~X?jc%wV>s(&i8MIp
> z{pskFDneaUc>MTrYdbr;kzG3V-mjx=Aof!olzk@IjdQxOXRlsz<>5nF9JN}k>}LUP
> zGQn}SSWlZP6P)JAL}Hpp9`gSy_YlT%s+*YGx{A4ti<nHBCdT8ZN~312o^|fg@0GcY
> ztBiMWD~O|tR~Q9p;>h&u+!o84gO|j@&h>fevgPRjVF1jmU%!4%UA4wyU@=9;T04sA
> zWM>&?GadQPz%d_FW}qxCO8HfJsnS-Rk9Tla?pxZ;MA>IDAH;PLvnkWX#M((rCOV0}
> zxlL}Hj$PBf_@XGMI}Opzvg>YNuVK?TzMpXjtDtb+Z@~;@F`eWr!*s_yMO@Cm*8mFZ
> zlXRBp(`(T1OP2OCmHhua&FNx>=SJB$RmoW|cK@Fqfho%Zjgyj+hBs^0%3W7`Ozvn{
> z;XXb-Vr69|4({%<>w2b4a`O>`@s46J!AXoK%@E_sGsI}pbmcf^vWs$5uIJw~oH$MN
> z5q`9ly^J!q6J0YK89LfLr^=5tFCyEd;$MBWXYeS~tkG5uO4zs4D-6{=p7UrubFqZ3
> zKPm%98q<oNYi@3Ng0oLGYu1#KrAkYiF1=)!frX41V=W_1CX0^g6wxsQ#@UGOI9t)P
> zn5sO7k+pLHl=7l1dMqo#X(P@^lSxQpqG%e8ml4Jjr1ub=%=%4Q+$;8F@eRm#HZTko
> z&n}YVr5)P-+<UJ!;%Ffb<NYxvDCxKPxfiESM=%YbK%d09;wU^o%kaU7vDSYv&51G!
> z&sXKgS}PEj`sAm(qcNEB$IF*5_Z>HG+$31xm-_S`C@osH5zm;l;=S^)j2b^fG{@S=
> z2(zi8ZSEl2;~Zq<IQzVFb4TS^@E`ZIOzo8L!^cb(4a12tM1Q<=9XRq$snTWXu)wK8
> zx`;V^|6}bF!;B}1<`^)5Szi3#rdt@l-s5rNtN@wrzfyi`_sdPrJZWodi@m+QvYSVn
> zHf`j~;$KOPdX43$wq2!5f32K;BgW<q(j6xQfkC?FGFZ=2hKwFBLks{M)kj$Z7Pyxe
> zroXnCbm}woO`}$w9{*6Y?zQ4ym)MOmQ!=^$x~TB>0Ig+CchZ<>UZ+uup!!YQoUYTT
> z`K{Uwo2C5`5aw=!W^K<^`0fX9#N_~Yfj&vXe=Zp7-l$c_O?4Z$yofk=-%jIg)NRz_
> zR>Kw@jw7BK^li=zeUfW*6arIL;+~MuB_~w*{)gn6YOQiZc3cvB?|2z*YAYIGn&BpP
> zq6KF76<|IbHNi{-|7)5~m0@7Up~hfFFq^vm1R11nB`rJmc~Z1!u>@o_4qY89vpyJ;
> z^XYEQI`()l)MygYw=GC3FTM9e6ODuUIf5z8oEJ%@s?}xW$dMAYBuZJu$Tc}_+qRS1
> zHS0;SqF;0Rj?-=XzA05YrF`Wo=YFi)=vFPYW~uo|%SURB`c3ZO{sk}!!_$+U`l1)W
> zu}C`0_C?uS0i0RlrdV`B;dEzlJP+48@l!7RFaXsG?!r+RGvC5AfU{KHVUSSwE6^uN
> z_|K_ZuE*zUPYyY;F}$6|+u*n<8$5@)*maZ9IpoKoE_!-#*o&hUAHSZ-LZUKTjvhVQ
> zX_&G3`Gix?#d204m<)^v1{g_6W$6S=%LmU@$h*cc3`^!34#v~~W2!?6)oap<Q-nc)
> z4)WpPFt=;rIv=jq8-V&;+GoVrOy)HLjP`4qh4WBBm49A-de*KoKW?wm7zPg=rc94=
> zeAURvNQP^S5cPqYS)Dp{-mIaaF}G#QmS*35_Z=CA1LUkcGEU(NWu<em6&b(;l12+<
> z>;rTJXoS=PI0Z<_NGjaba>k@O(jQo@S~aUGRjSwnj)h=fwrp7r%Ig7r!N8P^Edb88
> zd=Kz_e35eMWDy0YPbq1FxJZw>W@Dfwzy|S0_z9q!8W*y$>sAX33yVofNx6FT=+SFS
> zVq%UpP*dxSM)39N^XH44ICEOb@5qT`MGhZJDRTHkN|B={Pbk-U|J>z^Mb2Njtbpfd
> zE}SoN^4uAvd<Ag;p7R>-F&>Y|pYMkajg5mtcLc{wf4BPccZ34c%BxzdPMxuSF)>%R
> zTz(}J-Mqzc5_CD6nKH(9mU1+j;;J0q2Co}J*E4`#rVqVL4|=37bT$n`tL*Qq)!+aw
> z$2SL|Ae@O&_U&Pz0IqH3dgd`zs@FQAHy#GWMCf+ZA>WZtVW`T&vQ2XLm#7`*(Cv;D
> zOX$E*LBz;#tQZ?v$iM-^PFq`ByDnO^sE?_sDJzW5uG9f}PNpbaq5R(rpvxG`%1yY)
> zgk%hs^}QPs;5w&1JD}n(K7aoFH8<mW8xJ2oe1ZEn%+1Z&K=~n5I+l<bNnhMbO)Wy)
> zPD?9tJ3U>gRDgN15*dzbx&I6dM`x8{s8=q57_xHh+WRNYof9yN>^X2C1NR0);+IK#
> z^r*-k<fG*G7I>ZaAH4-$yL<osJL9m-yq}&Q4*9U5)|oM5hU>zG3zvI)d&j!FyK|Sj
> zf(3TJBiulP{TD5~1|2(gv^#U=Oxor%sp2><Ky2K+WU`B=SUcxgzZ0gxLghKYYbq$$
> zc;CrG#yiax3s~CYU}+B@ZThBknQ}Xjwml?HSLDU+Ns$Ih<{+K}WpJMZ@~*%18Fb&u
> z(H-gKS;KGV^}9R~j{m2itiJIZW%c1Jf;6OkyAEP#XeI{wmd{L0&B9l$S~cwD%a=c7
> zWMq)J*dW;DlF8mx(Y#J3ATzLhf83(;2@FvFn{U1uee~F|XK5J^l#RF^a?>r~!IQ_5
> zn(<KXrl&zm%A@%B_+yCHjuH!hsXo0InVFdiLqNTH=Y17;U&TBuH|V<#9Xd?8$#qJ%
> zZz&rz%$qllyUh*6{j!fAKQ8j-&6{_oMHEi2Fwp4U8J@_=$tm*m=~E?t)N7dv6)Frz
> zV^qFp!_CIR!^5{Be@gw|>$>?boBBpu6BCnARM@NS$FGWqUxaW>%*E4BrqA<{X&#Hk
> z*~43$=Xxvu-v!=d7>+mE&+?T1L$#h4EA}Ow3#Q<ub3mBV=A9xN*I4;<>gbP?CF3SL
> zX8u`zDk$NA8S{K)j&HaexR5Gq_nZ{9#y?5FzQeP%N9yi`O5$++`gQKP{=0qF|6PRg
> zv!T_fSFheIyvM9JS((ZzOEmJ_Lx&FK9653%hhI<QO3xRs@)oqEr>AE%Y0|_F@i_R;
> zvQc+z#B>18F0rel{>MdmR2NhYghGTXNV&@gzv@fpYlf=~CRFxDBID$jsalO1HOxni
> z8nu7u(4iN#w6sn)Yu3z%@o=9#78#e!!Tgv8m%K1N4sU%|I6Z>QhN80pQp#}_jJ+HM
> z3RfFYU*-4Rxh#e~FI9)OFgOFisLEPpeqyG3_wK5%cW|`;pCym-3(Ps}K2}rgcgL;U
> zni~)mC*Gk;Wl>P1EbtGN`M$w2&nHOc;mGqp0>gML4wPA5zS6d17cMd2a0y-Tbtnb#
> zaD36s?{~z92H4&30gda_Z;&!)ae&PA4SHu@Z$ni^mf1TrT0&x1icfg7RH#_#KDzPH
> zy?gie!u$9U_{UcBq3o=Lmiqeo>-h4yZX69E7fg4%Ql&~qDp#(2pjNF~7kqqtUh*E7
> zzCsG|V^&Fs*LBR8G2_>*TXz5w{V4QdR+{d#Y12ZFA3uH(|Ci%`9lS$Ua*fiZOZRtj
> za*Eixb?aGfh5*LDla!QnOixdbIx*KsmCk>sEK@z`((ZwQfz125gM$NoQVqd0RAI;v
> zbVY2Vt*z~nkdSbMJ8+yofBxQ<En7}Q#h8bCG>#PJef|2iQdjuTay0JRwW~#NaPU?%
> zx@(s&UrvY4dSmI*rMrIm=_eXloUU!@>+8F2|Ni|2-2<LIH!d#jHu5@+uADA@+^Z>%
> zP^jXKnl^1UXQB78$hZ{}xP*?ak>aiR2L{OkKl&KvVWIz@!z&<I+~&>~=%j+~g3Bl}
> z&CJX~@glh_f*<wd+80{dd`PxPG9X(Dr38=l5SA@Y7YNZ9F*4&_`Me8-%ego(L;@nB
> zWXbYGnYY-79|myRxpQYDypMm>AtAql`#^8Kz?aYEz5Dj<%fx$LhU;AaLwB}$sK|3%
> z6VHtfC`k<r4Csny6c7+lu>U3)Edv#%Y~=wxlnya$;Cy$TEG#ViE?&Htt^@=X-YkI|
> z7l28qE^&s7j6@x`y=sRJ=6L}6B(9BsK1l<!8XAmNVq)TP+(S~iiX>B|$qV!6&*$hv
> zD+m^<G?b1N%atqFZ^42E8|gQjAMQ8hK#%am(9n?E&X_@6DA@Hx6^75x=R!Bm2Esbe
> zBV<5}s6nO5l}%f=ZnL~`lcsyr8a6s!Urp@{eFO8*;9}kS^{>{cSMM&E?QyNzbzaq|
> zRVx>ew}Eidu3bB2NQR$G=4X=Wi;0SPk(`{&Zk!u0DIccK2c0S2#t<+jEmNoB#fz^%
> z{+IqJ&-VdwGEx4tZasQ#)*C%qFDfdE7V}@y3qO=l$&|vQQR&Lgu-xzq@8CYJ*&^@O
> zxZf1#hLC2;=3U$X0Tq^`rl!WF4-R|w?77eDB(58xH035;+{O^yUj)J!LF(+{ebx4c
> z+&qCgBAHvYT@EYW%F2pESPhXcrQpyF8#X9AbWnAG6;976EucZurcK8{!rdp6a5IK0
> zSFZ5;NZCxAd61wx=5*=Og`0b+RE$B8eAn{t$(=iQlyY!)5`H>{arp&0dwcu!RjO2(
> z&yU8kY%CYkWEhs29|eOXW@DqOkVhymsUnzw4g{2B#sG&(3i}mWRjXEQT8kDf=JxH|
> zH?CK&UdI|YYI3`GuR+;^25QKlL4(D}$XFa59hJ2_bPC?FV}~3(cu-caUafq-jz@mp
> zWc&8*a^%R-H@J5d*H@#^9G_#pDkfF;_xJZh7q)NBnl<T=968*e3X(+ePNFjiEoujQ
> z2W1-;y3_G<DRe&W-o1x(@77Ct^yn{5o3?z4#&M!&&z`~k`}a41w5CN()!-jv%KWse
> zHE7Vl?Z&NJS(FE?1S2CO8WbFQqLk~^xN&1IRA>gm$kprD`A(?j%tPgQU$}fZD-{*`
> z01TFnisOzS=$_xKSh0fskPFSmjoV5_xPAAo!T`{dU!Xp2v~Jz{s*R1!<LjtoZkv4{
> zOt5R$uKQ@z9M`N@v0}w3r_Y{!{qWHvg?Xn;nZl6}e)U%)A~NzU)4Y?K%6fYZ=DSp;
> zOqs)|>$|t^+{w*Aqj(O9k9WNn;eSTM>gg8{ph$3*0}?wIb@8Ze+qPGJ{`uz{kkT)>
> zZ8uaH8gO>it5<i$`@e+e&3TLlaTob`dV0Rn)YQBKwI!u)-MSo-qYj-%c#*U~X?b#5
> zi(_E*0hLeTZ!mW3*lsZ6wa`*srca-~Y4~u>%T^Xs-#9zDiSsm9Wlawm@AT=@%F9ek
> zOH*3;rAwEUk3aFdJ76^BJKpQpuU9^0$ImMh{1_;~uiWy;dt_vKC(-+z>xAfN%&<(0
> zpI+X!ZJPuI1<O>ssWRTm8kj6r7Ph%)DEH7^ZvwMULqiz=iQOFKXE#RO>K~*0^qUMA
> zI53f$C0xKeAX7#}MBGDnej+F+=n$U$0=lfst$2oHyoYso);|6E9Y#C{95?Mda)e*0
> zke&PX$-2#(bARd9?KaX)#{C7QN|o|WTD$humYq9=m}Fx^M+@qr+&p0pkZ5af|717f
> z?}0$redthD{RRy<*4h>6MDIO(SoWu+$N`{DyLMbZWH4mdu;pYfUfZ~Rdls1S1g=xU
> z1_GO0-QAxaI&ne{9X~Gf7B0MoYsQ^AclNywX50+Hvu)3w+-^O3(AAC~Rd5G9P~Na6
> zO`B5xr8^*dKHb`N>TG1*e7?Ph4oTBy&A5dOXRqiF+X;+L1NT=#B2<QH(b4)P(b9S+
> zz;JaS-aA2=wSYuSw6wH5Gu~?IGvCD#;^Q5Ht|~+l6IaTmi<cAyUa>OKg;8XaL9boA
> zu6#O=l9UXrVo-hvl#IylE)pt9O9p4Rz^;HyPO(o3!TY|xe&XilE^e-K08g>Ab<5Nq
> zIqEW)Fg`judJN*Xg7VL)zrQu4^Pz<FsS0%&I$Uet=AC<GdGZ?BxO0zOyZb=s0(a)h
> z4M|wDUZSA8hb)Pf!0;ux>KemXp{{_1p^53a9S06ed{W-h;QoWuInh81nFfO)(%pOF
> z{1u5!TqWU4<FYD$_uV>NAA@|m0NnF(QqMkpFRom-QC6&8CvhuRW&c>C26eiT+Ipi?
> z4jezFTt~i{rM~@^3}NLm+vDz`6K7=4(c^OA!iCJx(9qOn%a+}MFt`R|<<5cQr(eh8
> zIpUMn%H*jIHxS2loaMv|2Tq)pWr@k+;pO!L*Mia0a&m!|d<W>A+z_HC^k@$7)6h{L
> zrZqC<$mt7`xOSr~iCvyuu3Y&gxIP&7Dex!|OW^;96W(tP=m#yJ$ZA2F`MJ2b92sM5
> zmNwJHD=R2qse}YAk?^o3vSssDxpDo5qU@6?sUK0vrtU%sLQv6VcS4<mM>3r%Jddh#
> z>MhiFjzR)OL`2F0&xJC7-Xigw?<;d>`{$aOT0b*08+Qg0DHzgLGc`4}3Cc+&{y#=|
> zv7GZBq(9c|O7dnjn$SpD96~2!7>z-pvM3-FhFA~`FMqL|Z2OXHc@UlqNwvjf!j!4^
> zLSvT;R~}BZwO1+|P)E8P^3k<%bWTm)x>LAZ*W7wCrKAfa3<vo+E5>Kl9jT{(jmwaI
> zLL<b*!}B?q#R1nXr#LvLEd?_NM#YNNBwNOH`l4u2huK~}&$&`GXz4NuiCM1P=Sogx
> zHD@?SV8WC#^Voa9K$drr`$F&MT;CKPmmnG=w8^Me$e%qd$9`$?a|WrR>KylnTTgYo
> z8<V_Nf{~A{({y^)+o0@>!(Lhu8o2iVN2qXqKd~{SS1(w#PUxC8TU%RSH5qI1c)|RT
> zoUo8(5*iHaH!@lh(drK#JOriorov!k%s(PBEv-Lp$45rx=j_(6-yk6&q5K-IEb{Ub
> z??re~USVQA!SNOJ+1t=}wn1{c9y@ldKcur7lKE|S@E;(&WLowHGv_aQ#Fd1;s8oAb
> z_iP=5F)v0LnLO3eH-6lIutsV<wT9HS!h!LSDqRqd#*ew{yoHZLVpf15Vx{lE!Stx-
> z8f^~Qa0R2D^Xz#_x``XN%VfvtG@d3Reho+@O6b}pOO<k5wQbKUzldn@$9o^5Ir0M2
> z{klYn>GOSqUPUfX2IH*|^<kRy%(6iEnG5_w-ULT4m&oNwVq!J%*+@NuG;IUp+bHkt
> zk$Q%A)HO6yhiU7kqwLqdt5VgkM2QmKi-N;5BjS@}DHwCaD1FtcOWGx>X+$;<G9;I%
> zR6zO0dMx&P9u}7<kt>q9CW>)%aIZ4T|Nqa7ZxbrN9;8`2FwO|*iwhPnUcAS`!s5nw
> zt0^zMy&`fWLYGTK*fLof6)(|C`I+S;=!ARa*s<es?dml}_hffW>y4Hex8CEYnqh^?
> z+BNGSaU=QhQ3-&Q3Gk1QK>sKS^otgUsqSw^k2bhBb?VgpFowL){p%o|wkS^>;2#?t
> ze;?(y^y<}X)SMl$JSm&2I74DrNT*-A(VcD;zz+>@JdR_C<4_meWPr079J8(WeU++i
> zp)o76!sAy$0<DxzKX=`O>vZ^_qX!4HN7*{NJfJi?b0bZjym*nLuCC5ir5w%ZQm0NG
> z8yHNtqgJez;AoCBM`o4!wlpQ}i0U<K`G6U6maST^FjD(YU6hSji+}aiG*7>v*UWSG
> z@w3vi-++6#PD_|00nuQxHKwMfbVi8<_-#v_ufP7<ZJtlSYc89<55xSx$urOJEc6>-
> zm)(P7q)@-Mlq^}2Lw|g>>XpCy-Wd%ob0r$n@yoXa<z}OtsHUdYwN|ZK%K9q&|MwD@
> zfCJKvAk{iUQt890_FuSg;Snn<t29%SaWCxcre*mo3dxO*N|vQd5+!D70vL2T7&T5|
> z)R<^8EEzXeqL##>dyWP(E(M|`EF=a@9S>%Vkr~tHW}BOhe`RE7lnx_?pK1<(@nir-
> z?g-U@U&iIk$A5+JVmY_lvUArS>-;0)WUhCR%=Zq;tx>Z!H>Dbj+dTm~b0~Tiz{=oM
> zCdUw)x9|LOvUl(jna6lO!MQbS*QHyWYQ%uUO#M6m(*5XcFMpZm6D%C`gN~jF<L?|S
> z^V3jQo^!%uu6Ll!oVzHyO@~hGYR3Wto40I}5EQjSn7&s)L~fmW4OHIo=Hn*VJn~o+
> zAiGj7P*uwD_xHc)<m7b1%ggH`1cs8Pp^3%mFN+t~f@I@Z;@IIMN8RyQ8~~Lh5~UFC
> z<Czf|8F>PR=VgwOhD0ZbowM873Kc7Hw4rhBy7hhL`G(~BghmVJur6J?^Z`8v!ucXR
> zF8Pk@yv1j}EnSAsND2GT5b~=5G=c8-%Yg$2j8?8(xiBOoWFsv03lk<xxNmGc=J`}x
> zhio^O**WNbbC*UYNL+NX#Kk6qQS(5?jm6Q|I~=;ASMD@Nmu!o1Rxgc>jqigI&(EDZ
> zcOxwEg<wYGbLY<e0-cn)Bi+RQtArOzMZNc6P2I~jGiJ*q$C+X>-tINJF3x7rb&Se9
> zbuKa@r&(2wC}heW1BQ+`&v=ua+{9#p?JLA_MqK(pQs1K68i(xMwDgRhO>}S(+v&5#
> z(cMd?&&!)$wRfE-Q=DgsrHxZ|{f13a5Y`Toj#GZ>y#@?94pFHrL$R`Re)IL$CESrd
> zcY_;Pvv$3W7B)_~)($h3r4tUbJjHR=0%f_#B$Q>6(=5>%J?32T;$P82O8KI3`3jX{
> z%qBVHaJdPWT;xsf`iS$K#WEFn*dxA?x%IWuWy(@lZeF!o^+jBk!t^FP&lX!(4<!$6
> zLlauyT-*N7FJ=Ri@LSzY(em2EqU(niWCH0qFFZUvY5x5A$DEy=Z$kfkXkudW%+S#A
> zrGbILYfB5uH(<Qi`uh50z-Q*><_~OaY;HhTJhouLf~2spFpq?U1QUL|{`T$L9UvLW
> zjK5Az{g(+ZmQ!wh`VJd)edwsMZ-$IA$?VcwokJ*kxJOTzcj`|071FcM5S=TGH&o9I
> z@dnc(r{gf)*i@q;oa0t6Rl00+o6bER4AC8%r8{nlj5fEE(UwzXu=beO?Ys85U#46I
> zcE22op*7wN7^i7um2Ny~x)_XiklsUeXykDHcU>?h=d~@X)vUX}TYrt`T85Un+GDLn
> z*L1RsFdm=Xd+^A|4V$&$Yzy7&=t)%$(o&fM{=Qm`9l!J)@(gL`j><2Gj@gu)K0|e$
> zG-=hIT|RwITO*H##fp7t*12c@JHzzNb4HGxDB30ybMbzj)UMw+3}M<J-T&+gOE3;~
> zye44KwpXrP>A7pyu9553t+ND!%|O?)AU;0cFE%z7{2IO#T|h*1bhLj=OpIq-T-<cr
> zw_3Y)t<I4nM|z{HYK?R_O-P2P;{Q=m{)=q}&3-&2lphd)|C4~WxJL>3&fzFrrxa{f
> z?91X-h~o=z+duknva(cj*914CrIQ0c88{o^lgd@9a;S3E>c`8JuSETmdLNf$=z$U1
> z7cE+>ZS#&j9CXIdI5;gZDR-#RWEld~ZQ7ci=p2fnV+^-zr1J!wivvo2TV`9uDnA~r
> zROQD*B}#tF;U=!`<e)$I>tq8_R0*U{W;X(SN|gF`3&J0(_<gmMZ@w+VRhZOc`P|(Q
> zmKz_it~vuwNOM)$3Y8C_VKLkSKoe=vkW+R!`L7U|sV2|>XbR9<hlWXeFl@)WckliT
> zowQSCW@dX_YXh_ZC=I!{dUb%3=%XdPSdQbei>3oGE0N$iuf2B}0`KLAp~JH(9?z9{
> z=F=AzF?050ICl5+5aI+!J1`TyYseU!OCOD{o-SzZ0L7P}e5LOVM@^XadeWRA(Kfdi
> zP17kdP}l6u*WZ-n_$1W{su9ea!#8SRc=~km0|L}T#{irc?}2-K1~Me)yeYLw^j5Er
> z`;^9<s$_V^8;NVwohemS{-Hz_TqpCh%$z>f#D6{~9gr0(9oIfS0@GCm{-fiH|4zb-
> zWra~!q*UY>oobwp760C058eab8_y#srie#CbP;#IC56M%BIovilrnTc=5h=&4%47+
> zTcbgvpXN+)oiF2^+{I$5ix^qiX4bCXkZYoJ!4RBKASoV102zn*@;VuXpi?uik$D;B
> zU$gzASO&&X%>t648BP_4@!6Odhs3a|GLw;6W;QDN(=u(<809}YsqvZqCau`8waD^y
> zn~N-4y|GA4^7<mN$s3Bqt=WWYTZ$xX++HMc^UflPo3`hN+fpQM^(GZ#u(Da91exTE
> z*i{>Nk5Z?4!zMr3>KU6{8m>Jmwa)<cTUD!7<FukBx=TtiMJ-sdev6WKemoVk6;AVC
> z%#Zmpf0joThvnt{{BZA%ql877@jSc^u*^zX`Jd^0rvC%PN(XVAmU<i=Yq-{k4i6)6
> mojw4Z{rN|I06vV06#0L0BQaiPgq42)0000<MNUMnLSTY`z}`*(
> 
> literal 0
> HcmV?d00001
> 
> diff --git a/docs/xen.doxyfile.in b/docs/xen.doxyfile.in
> new file mode 100644
> index 0000000000..00969d9b78
> --- /dev/null
> +++ b/docs/xen.doxyfile.in
> @@ -0,0 +1,2316 @@
> +# Doxyfile 1.8.13
> +
> +# This file describes the settings to be used by the documentation system
> +# doxygen (www.doxygen.org) for a project.
> +#
> +# All text after a double hash (##) is considered a comment and is placed in
> +# front of the TAG it is preceding.
> +#
> +# All text after a single hash (#) is considered a comment and will be ignored.
> +# The format is:
> +# TAG = value [value, ...]
> +# For lists, items can also be appended using:
> +# TAG += value [value, ...]
> +# Values that contain spaces should be placed between quotes (\" \").
> +#
> +# This file is base on doc/zephyr.doxyfile.in zephry 2.3
> +
> +#---------------------------------------------------------------------------
> +# Project related configuration options
> +#---------------------------------------------------------------------------
> +
> +# This tag specifies the encoding used for all characters in the config file
> +# that follow. The default is UTF-8 which is also the encoding used for all text
> +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
> +# built into libc) for the transcoding. See
> +# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
> +# The default value is: UTF-8.
> +
> +DOXYFILE_ENCODING      = UTF-8
> +
> +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
> +# double-quotes, unless you are using Doxywizard) that should identify the
> +# project for which the documentation is generated. This name is used in the
> +# title of most generated pages and in a few other places.
> +# The default value is: My Project.
> +
> +PROJECT_NAME           = "Xen Project"
> +
> +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
> +# could be handy for archiving the generated documentation or if some version
> +# control system is used.
> +
> +PROJECT_NUMBER         =
> +
> +# Using the PROJECT_BRIEF tag one can provide an optional one line description
> +# for a project that appears at the top of each page and should give viewer a
> +# quick idea about the purpose of the project. Keep the description short.
> +
> +PROJECT_BRIEF          = "An Open Source Type 1 Hypervisor"
> +
> +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
> +# in the documentation. The maximum height of the logo should not exceed 55
> +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
> +# the logo to the output directory.
> +
> +PROJECT_LOGO           = "xen-doxygen/xen_project_logo_165x67.png"
> +
> +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
> +# into which the generated documentation will be written. If a relative path is
> +# entered, it will be relative to the location where doxygen was started. If
> +# left blank the current directory will be used.
> +
> +OUTPUT_DIRECTORY       = @DOXY_OUT@
> +
> +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
> +# directories (in 2 levels) under the output directory of each output format and
> +# will distribute the generated files over these directories. Enabling this
> +# option can be useful when feeding doxygen a huge amount of source files, where
> +# putting all generated files in the same directory would otherwise causes
> +# performance problems for the file system.
> +# The default value is: NO.
> +
> +CREATE_SUBDIRS         = NO
> +
> +# The OUTPUT_LANGUAGE tag is used to specify the language in which all
> +# documentation generated by doxygen is written. Doxygen will use this
> +# information to generate all constant output in the proper language.
> +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
> +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
> +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
> +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
> +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
> +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
> +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
> +# Ukrainian and Vietnamese.
> +# The default value is: English.
> +
> +OUTPUT_LANGUAGE        = English
> +
> +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
> +# descriptions after the members that are listed in the file and class
> +# documentation (similar to Javadoc). Set to NO to disable this.
> +# The default value is: YES.
> +
> +BRIEF_MEMBER_DESC      = YES
> +
> +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
> +# description of a member or function before the detailed description
> +#
> +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
> +# brief descriptions will be completely suppressed.
> +# The default value is: YES.
> +
> +REPEAT_BRIEF           = YES
> +
> +# This tag implements a quasi-intelligent brief description abbreviator that is
> +# used to form the text in various listings. Each string in this list, if found
> +# as the leading text of the brief description, will be stripped from the text
> +# and the result, after processing the whole list, is used as the annotated
> +# text. Otherwise, the brief description is used as-is. If left blank, the
> +# following values are used ($name is automatically replaced with the name of
> +# the entity):The $name class, The $name widget, The $name file, is, provides,
> +# specifies, contains, represents, a, an and the.
> +
> +ABBREVIATE_BRIEF       = YES
> +
> +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
> +# doxygen will generate a detailed section even if there is only a brief
> +# description.
> +# The default value is: NO.
> +
> +ALWAYS_DETAILED_SEC    = YES
> +
> +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
> +# inherited members of a class in the documentation of that class as if those
> +# members were ordinary class members. Constructors, destructors and assignment
> +# operators of the base classes will not be shown.
> +# The default value is: NO.
> +
> +INLINE_INHERITED_MEMB  = YES
> +
> +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
> +# before files name in the file list and in the header files. If set to NO the
> +# shortest path that makes the file name unique will be used
> +# The default value is: YES.
> +
> +FULL_PATH_NAMES        = YES
> +
> +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
> +# Stripping is only done if one of the specified strings matches the left-hand
> +# part of the path. The tag can be used to show relative paths in the file list.
> +# If left blank the directory from which doxygen is run is used as the path to
> +# strip.
> +#
> +# Note that you can specify absolute paths here, but also relative paths, which
> +# will be relative from the directory where doxygen is started.
> +# This tag requires that the tag FULL_PATH_NAMES is set to YES.
> +
> +STRIP_FROM_PATH        = @XEN_BASE@
> +
> +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
> +# path mentioned in the documentation of a class, which tells the reader which
> +# header file to include in order to use a class. If left blank only the name of
> +# the header file containing the class definition is used. Otherwise one should
> +# specify the list of include paths that are normally passed to the compiler
> +# using the -I flag.
> +
> +STRIP_FROM_INC_PATH    =
> +
> +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
> +# less readable) file names. This can be useful is your file systems doesn't
> +# support long names like on DOS, Mac, or CD-ROM.
> +# The default value is: NO.
> +
> +SHORT_NAMES            = NO
> +
> +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
> +# first line (until the first dot) of a Javadoc-style comment as the brief
> +# description. If set to NO, the Javadoc-style will behave just like regular Qt-
> +# style comments (thus requiring an explicit @brief command for a brief
> +# description.)
> +# The default value is: NO.
> +
> +JAVADOC_AUTOBRIEF      = NO
> +
> +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
> +# line (until the first dot) of a Qt-style comment as the brief description. If
> +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
> +# requiring an explicit \brief command for a brief description.)
> +# The default value is: NO.
> +
> +QT_AUTOBRIEF           = NO
> +
> +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
> +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
> +# a brief description. This used to be the default behavior. The new default is
> +# to treat a multi-line C++ comment block as a detailed description. Set this
> +# tag to YES if you prefer the old behavior instead.
> +#
> +# Note that setting this tag to YES also means that rational rose comments are
> +# not recognized any more.
> +# The default value is: NO.
> +
> +MULTILINE_CPP_IS_BRIEF = NO
> +
> +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
> +# documentation from any documented member that it re-implements.
> +# The default value is: YES.
> +
> +INHERIT_DOCS           = YES
> +
> +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
> +# page for each member. If set to NO, the documentation of a member will be part
> +# of the file/class/namespace that contains it.
> +# The default value is: NO.
> +
> +SEPARATE_MEMBER_PAGES  = YES
> +
> +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
> +# uses this value to replace tabs by spaces in code fragments.
> +# Minimum value: 1, maximum value: 16, default value: 4.
> +
> +TAB_SIZE               = 8
> +
> +# This tag can be used to specify a number of aliases that act as commands in
> +# the documentation. An alias has the form:
> +# name=value
> +# For example adding
> +# "sideeffect=@par Side Effects:\n"
> +# will allow you to put the command \sideeffect (or @sideeffect) in the
> +# documentation, which will result in a user-defined paragraph with heading
> +# "Side Effects:". You can put \n's in the value part of an alias to insert
> +# newlines.
> +
> +ALIASES                = "rst=\verbatim embed:rst:leading-asterisk" \
> +                         "endrst=\endverbatim" \
> +                         "keepindent=\code" \
> +                         "endkeepindent=\endcode"
> +
> +ALIASES += req{1}="\ref XEN_\1 \"XEN-\1\" "
> +ALIASES += satisfy{1}="\xrefitem satisfy \"Satisfies requirement\" \"Requirement Implementation\" \1"
> +ALIASES += verify{1}="\xrefitem verify \"Verifies requirement\" \"Requirement Verification\" \1"
> +
> +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
> +# only. Doxygen will then generate output that is more tailored for C. For
> +# instance, some of the names that are used will be different. The list of all
> +# members will be omitted, etc.
> +# The default value is: NO.
> +
> +OPTIMIZE_OUTPUT_FOR_C  = YES
> +
> +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
> +# Python sources only. Doxygen will then generate output that is more tailored
> +# for that language. For instance, namespaces will be presented as packages,
> +# qualified scopes will look different, etc.
> +# The default value is: NO.
> +
> +OPTIMIZE_OUTPUT_JAVA   = NO
> +
> +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
> +# sources. Doxygen will then generate output that is tailored for Fortran.
> +# The default value is: NO.
> +
> +OPTIMIZE_FOR_FORTRAN   = NO
> +
> +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
> +# sources. Doxygen will then generate output that is tailored for VHDL.
> +# The default value is: NO.
> +
> +OPTIMIZE_OUTPUT_VHDL   = NO
> +
> +# Doxygen selects the parser to use depending on the extension of the files it
> +# parses. With this tag you can assign which parser to use for a given
> +# extension. Doxygen has a built-in mapping, but you can override or extend it
> +# using this tag. The format is ext=language, where ext is a file extension, and
> +# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
> +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
> +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
> +# Fortran. In the later case the parser tries to guess whether the code is fixed
> +# or free formatted code, this is the default for Fortran type files), VHDL. For
> +# instance to make doxygen treat .inc files as Fortran files (default is PHP),
> +# and .f files as C (default is Fortran), use: inc=Fortran f=C.
> +#
> +# Note: For files without extension you can use no_extension as a placeholder.
> +#
> +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
> +# the files are not read by doxygen.
> +
> +EXTENSION_MAPPING      =
> +
> +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
> +# according to the Markdown format, which allows for more readable
> +# documentation. See http://daringfireball.net/projects/markdown/ for details.
> +# The output of markdown processing is further processed by doxygen, so you can
> +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
> +# case of backward compatibilities issues.
> +# The default value is: YES.
> +
> +MARKDOWN_SUPPORT       = YES
> +
> +# When enabled doxygen tries to link words that correspond to documented
> +# classes, or namespaces to their corresponding documentation. Such a link can
> +# be prevented in individual cases by putting a % sign in front of the word or
> +# globally by setting AUTOLINK_SUPPORT to NO.
> +# The default value is: YES.
> +
> +AUTOLINK_SUPPORT       = YES
> +
> +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
> +# to include (a tag file for) the STL sources as input, then you should set this
> +# tag to YES in order to let doxygen match functions declarations and
> +# definitions whose arguments contain STL classes (e.g. func(std::string);
> +# versus func(std::string) {}). This also make the inheritance and collaboration
> +# diagrams that involve STL classes more complete and accurate.
> +# The default value is: NO.
> +
> +BUILTIN_STL_SUPPORT    = NO
> +
> +# If you use Microsoft's C++/CLI language, you should set this option to YES to
> +# enable parsing support.
> +# The default value is: NO.
> +
> +CPP_CLI_SUPPORT        = YES
> +
> +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
> +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
> +# will parse them like normal C++ but will assume all classes use public instead
> +# of private inheritance when no explicit protection keyword is present.
> +# The default value is: NO.
> +
> +SIP_SUPPORT            = NO
> +
> +# For Microsoft's IDL there are propget and propput attributes to indicate
> +# getter and setter methods for a property. Setting this option to YES will make
> +# doxygen to replace the get and set methods by a property in the documentation.
> +# This will only work if the methods are indeed getting or setting a simple
> +# type. If this is not the case, or you want to show the methods anyway, you
> +# should set this option to NO.
> +# The default value is: YES.
> +
> +IDL_PROPERTY_SUPPORT   = YES
> +
> +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
> +# tag is set to YES then doxygen will reuse the documentation of the first
> +# member in the group (if any) for the other members of the group. By default
> +# all members of a group must be documented explicitly.
> +# The default value is: NO.
> +
> +DISTRIBUTE_GROUP_DOC   = NO
> +
> +# Set the SUBGROUPING tag to YES to allow class member groups of the same type
> +# (for instance a group of public functions) to be put as a subgroup of that
> +# type (e.g. under the Public Functions section). Set it to NO to prevent
> +# subgrouping. Alternatively, this can be done per class using the
> +# \nosubgrouping command.
> +# The default value is: YES.
> +
> +SUBGROUPING            = YES
> +
> +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
> +# are shown inside the group in which they are included (e.g. using \ingroup)
> +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
> +# and RTF).
> +#
> +# Note that this feature does not work in combination with
> +# SEPARATE_MEMBER_PAGES.
> +# The default value is: NO.
> +
> +INLINE_GROUPED_CLASSES = NO
> +
> +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
> +# with only public data fields or simple typedef fields will be shown inline in
> +# the documentation of the scope in which they are defined (i.e. file,
> +# namespace, or group documentation), provided this scope is documented. If set
> +# to NO, structs, classes, and unions are shown on a separate page (for HTML and
> +# Man pages) or section (for LaTeX and RTF).
> +# The default value is: NO.
> +
> +INLINE_SIMPLE_STRUCTS  = YES
> +
> +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
> +# enum is documented as struct, union, or enum with the name of the typedef. So
> +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
> +# with name TypeT. When disabled the typedef will appear as a member of a file,
> +# namespace, or class. And the struct will be named TypeS. This can typically be
> +# useful for C code in case the coding convention dictates that all compound
> +# types are typedef'ed and only the typedef is referenced, never the tag name.
> +# The default value is: NO.
> +
> +TYPEDEF_HIDES_STRUCT   = NO
> +
> +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
> +# cache is used to resolve symbols given their name and scope. Since this can be
> +# an expensive process and often the same symbol appears multiple times in the
> +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
> +# doxygen will become slower. If the cache is too large, memory is wasted. The
> +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
> +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
> +# symbols. At the end of a run doxygen will report the cache usage and suggest
> +# the optimal cache size from a speed point of view.
> +# Minimum value: 0, maximum value: 9, default value: 0.
> +
> +LOOKUP_CACHE_SIZE      = 9
> +
> +#---------------------------------------------------------------------------
> +# Build related configuration options
> +#---------------------------------------------------------------------------
> +
> +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
> +# documentation are documented, even if no documentation was available. Private
> +# class members and static file members will be hidden unless the
> +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
> +# Note: This will also disable the warnings about undocumented members that are
> +# normally produced when WARNINGS is set to YES.
> +# The default value is: NO.
> +
> +EXTRACT_ALL            = YES
> +
> +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
> +# be included in the documentation.
> +# The default value is: NO.
> +
> +EXTRACT_PRIVATE        = NO
> +
> +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
> +# scope will be included in the documentation.
> +# The default value is: NO.
> +
> +EXTRACT_PACKAGE        = YES
> +
> +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
> +# included in the documentation.
> +# The default value is: NO.
> +
> +EXTRACT_STATIC         = YES
> +
> +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
> +# locally in source files will be included in the documentation. If set to NO,
> +# only classes defined in header files are included. Does not have any effect
> +# for Java sources.
> +# The default value is: YES.
> +
> +EXTRACT_LOCAL_CLASSES  = YES
> +
> +# This flag is only useful for Objective-C code. If set to YES, local methods,
> +# which are defined in the implementation section but not in the interface are
> +# included in the documentation. If set to NO, only methods in the interface are
> +# included.
> +# The default value is: NO.
> +
> +EXTRACT_LOCAL_METHODS  = YES
> +
> +# If this flag is set to YES, the members of anonymous namespaces will be
> +# extracted and appear in the documentation as a namespace called
> +# 'anonymous_namespace{file}', where file will be replaced with the base name of
> +# the file that contains the anonymous namespace. By default anonymous namespace
> +# are hidden.
> +# The default value is: NO.
> +
> +EXTRACT_ANON_NSPACES   = NO
> +
> +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
> +# undocumented members inside documented classes or files. If set to NO these
> +# members will be included in the various overviews, but no documentation
> +# section is generated. This option has no effect if EXTRACT_ALL is enabled.
> +# The default value is: NO.
> +
> +HIDE_UNDOC_MEMBERS     = NO
> +
> +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
> +# undocumented classes that are normally visible in the class hierarchy. If set
> +# to NO, these classes will be included in the various overviews. This option
> +# has no effect if EXTRACT_ALL is enabled.
> +# The default value is: NO.
> +
> +HIDE_UNDOC_CLASSES     = NO
> +
> +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
> +# (class|struct|union) declarations. If set to NO, these declarations will be
> +# included in the documentation.
> +# The default value is: NO.
> +
> +HIDE_FRIEND_COMPOUNDS  = NO
> +
> +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
> +# documentation blocks found inside the body of a function. If set to NO, these
> +# blocks will be appended to the function's detailed documentation block.
> +# The default value is: NO.
> +
> +HIDE_IN_BODY_DOCS      = NO
> +
> +# The INTERNAL_DOCS tag determines if documentation that is typed after a
> +# \internal command is included. If the tag is set to NO then the documentation
> +# will be excluded. Set it to YES to include the internal documentation.
> +# The default value is: NO.
> +
> +INTERNAL_DOCS          = NO
> +
> +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
> +# names in lower-case letters. If set to YES, upper-case letters are also
> +# allowed. This is useful if you have classes or files whose names only differ
> +# in case and if your file system supports case sensitive file names. Windows
> +# and Mac users are advised to set this option to NO.
> +# The default value is: system dependent.
> +
> +CASE_SENSE_NAMES       = YES
> +
> +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
> +# their full class and namespace scopes in the documentation. If set to YES, the
> +# scope will be hidden.
> +# The default value is: NO.
> +
> +HIDE_SCOPE_NAMES       = NO
> +
> +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
> +# the files that are included by a file in the documentation of that file.
> +# The default value is: YES.
> +
> +SHOW_INCLUDE_FILES     = YES
> +
> +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
> +# grouped member an include statement to the documentation, telling the reader
> +# which file to include in order to use the member.
> +# The default value is: NO.
> +
> +SHOW_GROUPED_MEMB_INC  = YES
> +
> +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
> +# files with double quotes in the documentation rather than with sharp brackets.
> +# The default value is: NO.
> +
> +FORCE_LOCAL_INCLUDES   = NO
> +
> +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
> +# documentation for inline members.
> +# The default value is: YES.
> +
> +INLINE_INFO            = YES
> +
> +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
> +# (detailed) documentation of file and class members alphabetically by member
> +# name. If set to NO, the members will appear in declaration order.
> +# The default value is: YES.
> +
> +SORT_MEMBER_DOCS       = YES
> +
> +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
> +# descriptions of file, namespace and class members alphabetically by member
> +# name. If set to NO, the members will appear in declaration order. Note that
> +# this will also influence the order of the classes in the class list.
> +# The default value is: NO.
> +
> +SORT_BRIEF_DOCS        = NO
> +
> +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
> +# (brief and detailed) documentation of class members so that constructors and
> +# destructors are listed first. If set to NO the constructors will appear in the
> +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
> +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
> +# member documentation.
> +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
> +# detailed member documentation.
> +# The default value is: NO.
> +
> +SORT_MEMBERS_CTORS_1ST = NO
> +
> +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
> +# of group names into alphabetical order. If set to NO the group names will
> +# appear in their defined order.
> +# The default value is: NO.
> +
> +SORT_GROUP_NAMES       = YES
> +
> +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
> +# fully-qualified names, including namespaces. If set to NO, the class list will
> +# be sorted only by class name, not including the namespace part.
> +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
> +# Note: This option applies only to the class list, not to the alphabetical
> +# list.
> +# The default value is: NO.
> +
> +SORT_BY_SCOPE_NAME     = YES
> +
> +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
> +# type resolution of all parameters of a function it will reject a match between
> +# the prototype and the implementation of a member function even if there is
> +# only one candidate or it is obvious which candidate to choose by doing a
> +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
> +# accept a match between prototype and implementation in such cases.
> +# The default value is: NO.
> +
> +STRICT_PROTO_MATCHING  = YES
> +
> +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
> +# list. This list is created by putting \todo commands in the documentation.
> +# The default value is: YES.
> +
> +GENERATE_TODOLIST      = NO
> +
> +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
> +# list. This list is created by putting \test commands in the documentation.
> +# The default value is: YES.
> +
> +GENERATE_TESTLIST      = NO
> +
> +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
> +# list. This list is created by putting \bug commands in the documentation.
> +# The default value is: YES.
> +
> +GENERATE_BUGLIST       = NO
> +
> +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
> +# the deprecated list. This list is created by putting \deprecated commands in
> +# the documentation.
> +# The default value is: YES.
> +
> +GENERATE_DEPRECATEDLIST= YES
> +
> +# The ENABLED_SECTIONS tag can be used to enable conditional documentation
> +# sections, marked by \if <section_label> ... \endif and \cond <section_label>
> +# ... \endcond blocks.
> +
> +ENABLED_SECTIONS       = YES
> +
> +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
> +# initial value of a variable or macro / define can have for it to appear in the
> +# documentation. If the initializer consists of more lines than specified here
> +# it will be hidden. Use a value of 0 to hide initializers completely. The
> +# appearance of the value of individual variables and macros / defines can be
> +# controlled using \showinitializer or \hideinitializer command in the
> +# documentation regardless of this setting.
> +# Minimum value: 0, maximum value: 10000, default value: 30.
> +
> +MAX_INITIALIZER_LINES  = 300
> +
> +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
> +# the bottom of the documentation of classes and structs. If set to YES, the
> +# list will mention the files that were used to generate the documentation.
> +# The default value is: YES.
> +
> +SHOW_USED_FILES        = YES
> +
> +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
> +# will remove the Files entry from the Quick Index and from the Folder Tree View
> +# (if specified).
> +# The default value is: YES.
> +
> +SHOW_FILES             = YES
> +
> +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
> +# page. This will remove the Namespaces entry from the Quick Index and from the
> +# Folder Tree View (if specified).
> +# The default value is: YES.
> +
> +SHOW_NAMESPACES        = YES
> +
> +# The FILE_VERSION_FILTER tag can be used to specify a program or script that
> +# doxygen should invoke to get the current version for each file (typically from
> +# the version control system). Doxygen will invoke the program by executing (via
> +# popen()) the command command input-file, where command is the value of the
> +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
> +# by doxygen. Whatever the program writes to standard output is used as the file
> +# version. For an example see the documentation.
> +
> +FILE_VERSION_FILTER    =
> +
> +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
> +# by doxygen. The layout file controls the global structure of the generated
> +# output files in an output format independent way. To create the layout file
> +# that represents doxygen's defaults, run doxygen with the -l option. You can
> +# optionally specify a file name after the option, if omitted DoxygenLayout.xml
> +# will be used as the name of the layout file.
> +#
> +# Note that if you run doxygen from a directory containing a file called
> +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
> +# tag is left empty.
> +
> +LAYOUT_FILE            =
> +
> +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
> +# the reference definitions. This must be a list of .bib files. The .bib
> +# extension is automatically appended if omitted. This requires the bibtex tool
> +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
> +# For LaTeX the style of the bibliography can be controlled using
> +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
> +# search path. See also \cite for info how to create references.
> +
> +CITE_BIB_FILES         =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to warning and progress messages
> +#---------------------------------------------------------------------------
> +
> +# The QUIET tag can be used to turn on/off the messages that are generated to
> +# standard output by doxygen. If QUIET is set to YES this implies that the
> +# messages are off.
> +# The default value is: NO.
> +
> +QUIET                  = YES
> +
> +# The WARNINGS tag can be used to turn on/off the warning messages that are
> +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
> +# this implies that the warnings are on.
> +#
> +# Tip: Turn warnings on while writing the documentation.
> +# The default value is: YES.
> +
> +WARNINGS               = YES
> +
> +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
> +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
> +# will automatically be disabled.
> +# The default value is: YES.
> +
> +WARN_IF_UNDOCUMENTED   = YES
> +
> +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
> +# potential errors in the documentation, such as not documenting some parameters
> +# in a documented function, or documenting parameters that don't exist or using
> +# markup commands wrongly.
> +# The default value is: YES.
> +
> +WARN_IF_DOC_ERROR      = YES
> +
> +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
> +# are documented, but have no documentation for their parameters or return
> +# value. If set to NO, doxygen will only warn about wrong or incomplete
> +# parameter documentation, but not about the absence of documentation.
> +# The default value is: NO.
> +
> +WARN_NO_PARAMDOC       = NO
> +
> +# The WARN_FORMAT tag determines the format of the warning messages that doxygen
> +# can produce. The string should contain the $file, $line, and $text tags, which
> +# will be replaced by the file and line number from which the warning originated
> +# and the warning text. Optionally the format may contain $version, which will
> +# be replaced by the version of the file (if it could be obtained via
> +# FILE_VERSION_FILTER)
> +# The default value is: $file:$line: $text.
> +
> +WARN_FORMAT            = "$file:$line: $text"
> +
> +# The WARN_LOGFILE tag can be used to specify a file to which warning and error
> +# messages should be written. If left blank the output is written to standard
> +# error (stderr).
> +
> +WARN_LOGFILE           =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the input files
> +#---------------------------------------------------------------------------
> +
> +# The INPUT tag is used to specify the files and/or directories that contain
> +# documented source files. You may enter file names like myfile.cpp or
> +# directories like /usr/src/myproject. Separate the files or directories with
> +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
> +# Note: If this tag is empty the current directory is searched.
> +
> +INPUT                  = "@XEN_BASE@/docs/xen-doxygen/mainpage.md"
> +
> +# This tag can be used to specify the character encoding of the source files
> +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
> +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
> +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
> +# possible encodings.
> +# The default value is: UTF-8.
> +
> +INPUT_ENCODING         = UTF-8
> +
> +# If the value of the INPUT tag contains directories, you can use the
> +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
> +# *.h) to filter out the source-files in the directories.
> +#
> +# Note that for custom extensions or not directly supported extensions you also
> +# need to set EXTENSION_MAPPING for the extension otherwise the files are not
> +# read by doxygen.
> +#
> +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
> +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
> +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
> +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
> +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf and *.qsf.
> +
> +# This MUST be kept in sync with DOXY_SOURCES in doc/CMakeLists.txt
> +# for incremental (and faster) builds to work correctly.
> +FILE_PATTERNS          = "*.c" \
> +                         "*.h" \
> +                         "*.S" \
> +                         "*.md"
> +
> +# The RECURSIVE tag can be used to specify whether or not subdirectories should
> +# be searched for input files as well.
> +# The default value is: NO.
> +
> +RECURSIVE              = YES
> +
> +# The EXCLUDE tag can be used to specify files and/or directories that should be
> +# excluded from the INPUT source files. This way you can easily exclude a
> +# subdirectory from a directory tree whose root is specified with the INPUT tag.
> +#
> +# Note that relative paths are relative to the directory from which doxygen is
> +# run.
> +
> +EXCLUDE                = @XEN_BASE@/include/nothing.h
> +
> +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
> +# directories that are symbolic links (a Unix file system feature) are excluded
> +# from the input.
> +# The default value is: NO.
> +
> +EXCLUDE_SYMLINKS       = NO
> +
> +# If the value of the INPUT tag contains directories, you can use the
> +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
> +# certain files from those directories.
> +#
> +# Note that the wildcards are matched against the file with absolute path, so to
> +# exclude all test directories for example use the pattern */test/*
> +
> +EXCLUDE_PATTERNS       =
> +
> +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
> +# (namespaces, classes, functions, etc.) that should be excluded from the
> +# output. The symbol name can be a fully qualified name, a word, or if the
> +# wildcard * is used, a substring. Examples: ANamespace, AClass,
> +# AClass::ANamespace, ANamespace::*Test
> +#
> +# Note that the wildcards are matched against the file with absolute path, so to
> +# exclude all test directories use the pattern */test/*
> +
> +# Hide internal names (starting with an underscore, and doxygen-generated names
> +# for nested unnamed unions that don't generate meaningful sphinx output anyway.
> +EXCLUDE_SYMBOLS        =
> +# _*  *.__unnamed__ z_* Z_*
> +
> +# The EXAMPLE_PATH tag can be used to specify one or more files or directories
> +# that contain example code fragments that are included (see the \include
> +# command).
> +
> +EXAMPLE_PATH           =
> +
> +# If the value of the EXAMPLE_PATH tag contains directories, you can use the
> +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
> +# *.h) to filter out the source-files in the directories. If left blank all
> +# files are included.
> +
> +EXAMPLE_PATTERNS       =
> +
> +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
> +# searched for input files to be used with the \include or \dontinclude commands
> +# irrespective of the value of the RECURSIVE tag.
> +# The default value is: NO.
> +
> +EXAMPLE_RECURSIVE      = YES
> +
> +# The IMAGE_PATH tag can be used to specify one or more files or directories
> +# that contain images that are to be included in the documentation (see the
> +# \image command).
> +
> +IMAGE_PATH             =
> +
> +# The INPUT_FILTER tag can be used to specify a program that doxygen should
> +# invoke to filter for each input file. Doxygen will invoke the filter program
> +# by executing (via popen()) the command:
> +#
> +# <filter> <input-file>
> +#
> +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
> +# name of an input file. Doxygen will then use the output that the filter
> +# program writes to standard output. If FILTER_PATTERNS is specified, this tag
> +# will be ignored.
> +#
> +# Note that the filter must not add or remove lines; it is applied before the
> +# code is scanned, but not when the output code is generated. If lines are added
> +# or removed, the anchors will not be placed correctly.
> +#
> +# Note that for custom extensions or not directly supported extensions you also
> +# need to set EXTENSION_MAPPING for the extension otherwise the files are not
> +# properly processed by doxygen.
> +
> +INPUT_FILTER           =
> +
> +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
> +# basis. Doxygen will compare the file name with each pattern and apply the
> +# filter if there is a match. The filters are a list of the form: pattern=filter
> +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
> +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
> +# patterns match the file name, INPUT_FILTER is applied.
> +#
> +# Note that for custom extensions or not directly supported extensions you also
> +# need to set EXTENSION_MAPPING for the extension otherwise the files are not
> +# properly processed by doxygen.
> +
> +FILTER_PATTERNS     = *.h="\"@XEN_BASE@/docs/xen-doxygen/doxy-preprocessor.py\""
> +
> +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
> +# INPUT_FILTER) will also be used to filter the input files that are used for
> +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
> +# The default value is: NO.
> +
> +FILTER_SOURCE_FILES    = NO
> +
> +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
> +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
> +# it is also possible to disable source filtering for a specific pattern using
> +# *.ext= (so without naming a filter).
> +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
> +
> +FILTER_SOURCE_PATTERNS =
> +
> +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
> +# is part of the input, its contents will be placed on the main page
> +# (index.html). This can be useful if you have a project on for instance GitHub
> +# and want to reuse the introduction page also for the doxygen output.
> +
> +USE_MDFILE_AS_MAINPAGE = "mainpage.md"
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to source browsing
> +#---------------------------------------------------------------------------
> +
> +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
> +# generated. Documented entities will be cross-referenced with these sources.
> +#
> +# Note: To get rid of all source code in the generated output, make sure that
> +# also VERBATIM_HEADERS is set to NO.
> +# The default value is: NO.
> +
> +SOURCE_BROWSER         = NO
> +
> +# Setting the INLINE_SOURCES tag to YES will include the body of functions,
> +# classes and enums directly into the documentation.
> +# The default value is: NO.
> +
> +INLINE_SOURCES         = NO
> +
> +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
> +# special comment blocks from generated source code fragments. Normal C, C++ and
> +# Fortran comments will always remain visible.
> +# The default value is: YES.
> +
> +STRIP_CODE_COMMENTS    = YES
> +
> +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
> +# function all documented functions referencing it will be listed.
> +# The default value is: NO.
> +
> +REFERENCED_BY_RELATION = NO
> +
> +# If the REFERENCES_RELATION tag is set to YES then for each documented function
> +# all documented entities called/used by that function will be listed.
> +# The default value is: NO.
> +
> +REFERENCES_RELATION    = NO
> +
> +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
> +# to YES then the hyperlinks from functions in REFERENCES_RELATION and
> +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
> +# link to the documentation.
> +# The default value is: YES.
> +
> +REFERENCES_LINK_SOURCE = YES
> +
> +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
> +# source code will show a tooltip with additional information such as prototype,
> +# brief description and links to the definition and documentation. Since this
> +# will make the HTML file larger and loading of large files a bit slower, you
> +# can opt to disable this feature.
> +# The default value is: YES.
> +# This tag requires that the tag SOURCE_BROWSER is set to YES.
> +
> +SOURCE_TOOLTIPS        = YES
> +
> +# If the USE_HTAGS tag is set to YES then the references to source code will
> +# point to the HTML generated by the htags(1) tool instead of doxygen built-in
> +# source browser. The htags tool is part of GNU's global source tagging system
> +# (see https://www.gnu.org/software/global/global.html). You will need version
> +# 4.8.6 or higher.
> +#
> +# To use it do the following:
> +# - Install the latest version of global
> +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
> +# - Make sure the INPUT points to the root of the source tree
> +# - Run doxygen as normal
> +#
> +# Doxygen will invoke htags (and that will in turn invoke gtags), so these
> +# tools must be available from the command line (i.e. in the search path).
> +#
> +# The result: instead of the source browser generated by doxygen, the links to
> +# source code will now point to the output of htags.
> +# The default value is: NO.
> +# This tag requires that the tag SOURCE_BROWSER is set to YES.
> +
> +USE_HTAGS              = NO
> +
> +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
> +# verbatim copy of the header file for each class for which an include is
> +# specified. Set to NO to disable this.
> +# See also: Section \class.
> +# The default value is: YES.
> +
> +VERBATIM_HEADERS       = YES
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the alphabetical class index
> +#---------------------------------------------------------------------------
> +
> +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
> +# compounds will be generated. Enable this if the project contains a lot of
> +# classes, structs, unions or interfaces.
> +# The default value is: YES.
> +
> +ALPHABETICAL_INDEX     = YES
> +
> +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
> +# which the alphabetical index list will be split.
> +# Minimum value: 1, maximum value: 20, default value: 5.
> +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
> +
> +COLS_IN_ALPHA_INDEX    = 2
> +
> +# In case all classes in a project start with a common prefix, all classes will
> +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
> +# can be used to specify a prefix (or a list of prefixes) that should be ignored
> +# while generating the index headers.
> +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
> +
> +IGNORE_PREFIX          =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the HTML output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
> +# The default value is: YES.
> +
> +GENERATE_HTML          = YES
> +
> +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
> +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
> +# it.
> +# The default directory is: html.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_OUTPUT            = html
> +
> +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
> +# generated HTML page (for example: .htm, .php, .asp).
> +# The default value is: .html.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_FILE_EXTENSION    = .html
> +
> +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
> +# each generated HTML page. If the tag is left blank doxygen will generate a
> +# standard header.
> +#
> +# To get valid HTML the header file that includes any scripts and style sheets
> +# that doxygen needs, which is dependent on the configuration options used (e.g.
> +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
> +# default header using
> +# doxygen -w html new_header.html new_footer.html new_stylesheet.css
> +# YourConfigFile
> +# and then modify the file new_header.html. See also section "Doxygen usage"
> +# for information on how to generate the default header that doxygen normally
> +# uses.
> +# Note: The header is subject to change so you typically have to regenerate the
> +# default header when upgrading to a newer version of doxygen. For a description
> +# of the possible markers and block names see the documentation.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_HEADER            = xen-doxygen/header.html
> +
> +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
> +# generated HTML page. If the tag is left blank doxygen will generate a standard
> +# footer. See HTML_HEADER for more information on how to generate a default
> +# footer and what special commands can be used inside the footer. See also
> +# section "Doxygen usage" for information on how to generate the default footer
> +# that doxygen normally uses.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_FOOTER            =
> +
> +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
> +# sheet that is used by each HTML page. It can be used to fine-tune the look of
> +# the HTML output. If left blank doxygen will generate a default style sheet.
> +# See also section "Doxygen usage" for information on how to generate the style
> +# sheet that doxygen normally uses.
> +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
> +# it is more robust and this tag (HTML_STYLESHEET) will in the future become
> +# obsolete.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_STYLESHEET        =
> +
> +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
> +# cascading style sheets that are included after the standard style sheets
> +# created by doxygen. Using this option one can overrule certain style aspects.
> +# This is preferred over using HTML_STYLESHEET since it does not replace the
> +# standard style sheet and is therefore more robust against future updates.
> +# Doxygen will copy the style sheet files to the output directory.
> +# Note: The order of the extra style sheet files is of importance (e.g. the last
> +# style sheet in the list overrules the setting of the previous ones in the
> +# list). For an example see the documentation.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_EXTRA_STYLESHEET  = xen-doxygen/customdoxygen.css
> +
> +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
> +# other source files which should be copied to the HTML output directory. Note
> +# that these files will be copied to the base HTML output directory. Use the
> +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
> +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
> +# files will be copied as-is; there are no commands or markers available.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_EXTRA_FILES       =
> +
> +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
> +# will adjust the colors in the style sheet and background images according to
> +# this color. Hue is specified as an angle on a colorwheel, see
> +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
> +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
> +# purple, and 360 is red again.
> +# Minimum value: 0, maximum value: 359, default value: 220.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_COLORSTYLE_HUE    =
> +
> +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
> +# in the HTML output. For a value of 0 the output will use grayscales only. A
> +# value of 255 will produce the most vivid colors.
> +# Minimum value: 0, maximum value: 255, default value: 100.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_COLORSTYLE_SAT    =
> +
> +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
> +# luminance component of the colors in the HTML output. Values below 100
> +# gradually make the output lighter, whereas values above 100 make the output
> +# darker. The value divided by 100 is the actual gamma applied, so 80 represents
> +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
> +# change the gamma.
> +# Minimum value: 40, maximum value: 240, default value: 80.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_COLORSTYLE_GAMMA  =
> +
> +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
> +# page will contain the date and time when the page was generated. Setting this
> +# to YES can help to show when doxygen was last run and thus if the
> +# documentation is up to date.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_TIMESTAMP         = YES
> +
> +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
> +# documentation will contain sections that can be hidden and shown after the
> +# page has loaded.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_DYNAMIC_SECTIONS  = YES
> +
> +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
> +# shown in the various tree structured indices initially; the user can expand
> +# and collapse entries dynamically later on. Doxygen will expand the tree to
> +# such a level that at most the specified number of entries are visible (unless
> +# a fully collapsed tree already exceeds this amount). So setting the number of
> +# entries 1 will produce a full collapsed tree by default. 0 is a special value
> +# representing an infinite number of entries and will result in a full expanded
> +# tree by default.
> +# Minimum value: 0, maximum value: 9999, default value: 100.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_INDEX_NUM_ENTRIES = 100
> +
> +# If the GENERATE_DOCSET tag is set to YES, additional index files will be
> +# generated that can be used as input for Apple's Xcode 3 integrated development
> +# environment (see: https://developer.apple.com/tools/xcode/), introduced with
> +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
> +# Makefile in the HTML output directory. Running make will produce the docset in
> +# that directory and running make install will install the docset in
> +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
> +# startup. See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html
> +# for more information.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +GENERATE_DOCSET        = YES
> +
> +# This tag determines the name of the docset feed. A documentation feed provides
> +# an umbrella under which multiple documentation sets from a single provider
> +# (such as a company or product suite) can be grouped.
> +# The default value is: Doxygen generated docs.
> +# This tag requires that the tag GENERATE_DOCSET is set to YES.
> +
> +DOCSET_FEEDNAME        = "Doxygen generated docs"
> +
> +# This tag specifies a string that should uniquely identify the documentation
> +# set bundle. This should be a reverse domain-name style string, e.g.
> +# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
> +# The default value is: org.doxygen.Project.
> +# This tag requires that the tag GENERATE_DOCSET is set to YES.
> +
> +DOCSET_BUNDLE_ID       = org.doxygen.Project
> +
> +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
> +# the documentation publisher. This should be a reverse domain-name style
> +# string, e.g. com.mycompany.MyDocSet.documentation.
> +# The default value is: org.doxygen.Publisher.
> +# This tag requires that the tag GENERATE_DOCSET is set to YES.
> +
> +DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
> +
> +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
> +# The default value is: Publisher.
> +# This tag requires that the tag GENERATE_DOCSET is set to YES.
> +
> +DOCSET_PUBLISHER_NAME  = Publisher
> +
> +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
> +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
> +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
> +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
> +# Windows.
> +#
> +# The HTML Help Workshop contains a compiler that can convert all HTML output
> +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
> +# files are now used as the Windows 98 help format, and will replace the old
> +# Windows help format (.hlp) on all Windows platforms in the future. Compressed
> +# HTML files also contain an index, a table of contents, and you can search for
> +# words in the documentation. The HTML workshop also contains a viewer for
> +# compressed HTML files.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +GENERATE_HTMLHELP      = NO
> +
> +# The CHM_FILE tag can be used to specify the file name of the resulting .chm
> +# file. You can add a path in front of the file if the result should not be
> +# written to the html output directory.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +CHM_FILE               = NO
> +
> +# The HHC_LOCATION tag can be used to specify the location (absolute path
> +# including file name) of the HTML help compiler (hhc.exe). If non-empty,
> +# doxygen will try to run the HTML help compiler on the generated index.hhp.
> +# The file has to be specified with full path.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +HHC_LOCATION           =
> +
> +# The GENERATE_CHI flag controls if a separate .chi index file is generated
> +# (YES) or that it should be included in the master .chm file (NO).
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +GENERATE_CHI           = NO
> +
> +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
> +# and project file content.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +CHM_INDEX_ENCODING     =
> +
> +# The BINARY_TOC flag controls whether a binary table of contents is generated
> +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
> +# enables the Previous and Next buttons.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +BINARY_TOC             = YES
> +
> +# The TOC_EXPAND flag can be set to YES to add extra items for group members to
> +# the table of contents of the HTML help documentation and to the tree view.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +TOC_EXPAND             = NO
> +
> +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
> +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
> +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
> +# (.qch) of the generated HTML documentation.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +GENERATE_QHP           = NO
> +
> +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
> +# the file name of the resulting .qch file. The path specified is relative to
> +# the HTML output folder.
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QCH_FILE               =
> +
> +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
> +# Project output. For more information please see Qt Help Project / Namespace
> +# (see: http://doc.qt.io/qt-4.8/qthelpproject.html#namespace).
> +# The default value is: org.doxygen.Project.
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHP_NAMESPACE          = org.doxygen.Project
> +
> +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
> +# Help Project output. For more information please see Qt Help Project / Virtual
> +# Folders (see: http://doc.qt.io/qt-4.8/qthelpproject.html#virtual-folders).
> +# The default value is: doc.
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHP_VIRTUAL_FOLDER     = doc
> +
> +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
> +# filter to add. For more information please see Qt Help Project / Custom
> +# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHP_CUST_FILTER_NAME   =
> +
> +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
> +# custom filter to add. For more information please see Qt Help Project / Custom
> +# Filters (see: http://doc.qt.io/qt-4.8/qthelpproject.html#custom-filters).
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHP_CUST_FILTER_ATTRS  =
> +
> +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
> +# project's filter section matches. Qt Help Project / Filter Attributes (see:
> +# http://doc.qt.io/qt-4.8/qthelpproject.html#filter-attributes).
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHP_SECT_FILTER_ATTRS  =
> +
> +# The QHG_LOCATION tag can be used to specify the location of Qt's
> +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
> +# generated .qhp file.
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHG_LOCATION           =
> +
> +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
> +# generated, together with the HTML files, they form an Eclipse help plugin. To
> +# install this plugin and make it available under the help contents menu in
> +# Eclipse, the contents of the directory containing the HTML and XML files needs
> +# to be copied into the plugins directory of eclipse. The name of the directory
> +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
> +# After copying Eclipse needs to be restarted before the help appears.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +GENERATE_ECLIPSEHELP   = NO
> +
> +# A unique identifier for the Eclipse help plugin. When installing the plugin
> +# the directory name containing the HTML and XML files should also have this
> +# name. Each documentation set should have its own identifier.
> +# The default value is: org.doxygen.Project.
> +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
> +
> +ECLIPSE_DOC_ID         = org.doxygen.Project
> +
> +# If you want full control over the layout of the generated HTML pages it might
> +# be necessary to disable the index and replace it with your own. The
> +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
> +# of each HTML page. A value of NO enables the index and the value YES disables
> +# it. Since the tabs in the index contain the same information as the navigation
> +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +DISABLE_INDEX          = NO
> +
> +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
> +# structure should be generated to display hierarchical information. If the tag
> +# value is set to YES, a side panel will be generated containing a tree-like
> +# index structure (just like the one that is generated for HTML Help). For this
> +# to work a browser that supports JavaScript, DHTML, CSS and frames is required
> +# (i.e. any modern browser). Windows users are probably better off using the
> +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
> +# further fine-tune the look of the index. As an example, the default style
> +# sheet generated by doxygen has an example that shows how to put an image at
> +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
> +# the same information as the tab index, you could consider setting
> +# DISABLE_INDEX to YES when enabling this option.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +GENERATE_TREEVIEW      = YES
> +
> +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
> +# doxygen will group on one line in the generated HTML documentation.
> +#
> +# Note that a value of 0 will completely suppress the enum values from appearing
> +# in the overview section.
> +# Minimum value: 0, maximum value: 20, default value: 4.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +ENUM_VALUES_PER_LINE   = 4
> +
> +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
> +# to set the initial width (in pixels) of the frame in which the tree is shown.
> +# Minimum value: 0, maximum value: 1500, default value: 250.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +TREEVIEW_WIDTH         = 250
> +
> +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
> +# external symbols imported via tag files in a separate window.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +EXT_LINKS_IN_WINDOW    = NO
> +
> +# Use this tag to change the font size of LaTeX formulas included as images in
> +# the HTML documentation. When you change the font size after a successful
> +# doxygen run you need to manually remove any form_*.png images from the HTML
> +# output directory to force them to be regenerated.
> +# Minimum value: 8, maximum value: 50, default value: 10.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +FORMULA_FONTSIZE       = 10
> +
> +# Use the FORMULA_TRANPARENT tag to determine whether or not the images
> +# generated for formulas are transparent PNGs. Transparent PNGs are not
> +# supported properly for IE 6.0, but are supported on all modern browsers.
> +#
> +# Note that when changing this option you need to delete any form_*.png files in
> +# the HTML output directory before the changes have effect.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +FORMULA_TRANSPARENT    = YES
> +
> +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
> +# https://www.mathjax.org) which uses client side Javascript for the rendering
> +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
> +# installed or if you want to formulas look prettier in the HTML output. When
> +# enabled you may also need to install MathJax separately and configure the path
> +# to it using the MATHJAX_RELPATH option.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +USE_MATHJAX            = NO
> +
> +# When MathJax is enabled you can set the default output format to be used for
> +# the MathJax output. See the MathJax site (see:
> +# http://docs.mathjax.org/en/latest/output.html) for more details.
> +# Possible values are: HTML-CSS (which is slower, but has the best
> +# compatibility), NativeMML (i.e. MathML) and SVG.
> +# The default value is: HTML-CSS.
> +# This tag requires that the tag USE_MATHJAX is set to YES.
> +
> +MATHJAX_FORMAT         = HTML-CSS
> +
> +# When MathJax is enabled you need to specify the location relative to the HTML
> +# output directory using the MATHJAX_RELPATH option. The destination directory
> +# should contain the MathJax.js script. For instance, if the mathjax directory
> +# is located at the same level as the HTML output directory, then
> +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
> +# Content Delivery Network so you can quickly see the result without installing
> +# MathJax. However, it is strongly recommended to install a local copy of
> +# MathJax from https://www.mathjax.org before deployment.
> +# The default value is: http://cdn.mathjax.org/mathjax/latest.
> +# This tag requires that the tag USE_MATHJAX is set to YES.
> +
> +MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
> +
> +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
> +# extension names that should be enabled during MathJax rendering. For example
> +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
> +# This tag requires that the tag USE_MATHJAX is set to YES.
> +
> +MATHJAX_EXTENSIONS     =
> +
> +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
> +# of code that will be used on startup of the MathJax code. See the MathJax site
> +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
> +# example see the documentation.
> +# This tag requires that the tag USE_MATHJAX is set to YES.
> +
> +MATHJAX_CODEFILE       =
> +
> +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
> +# the HTML output. The underlying search engine uses javascript and DHTML and
> +# should work on any modern browser. Note that when using HTML help
> +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
> +# there is already a search function so this one should typically be disabled.
> +# For large projects the javascript based search engine can be slow, then
> +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
> +# search using the keyboard; to jump to the search box use <access key> + S
> +# (what the <access key> is depends on the OS and browser, but it is typically
> +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
> +# key> to jump into the search results window, the results can be navigated
> +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
> +# the search. The filter options can be selected when the cursor is inside the
> +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
> +# to select a filter and <Enter> or <escape> to activate or cancel the filter
> +# option.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +SEARCHENGINE           = YES
> +
> +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
> +# implemented using a web server instead of a web client using Javascript. There
> +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
> +# setting. When disabled, doxygen will generate a PHP script for searching and
> +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
> +# and searching needs to be provided by external tools. See the section
> +# "External Indexing and Searching" for details.
> +# The default value is: NO.
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +SERVER_BASED_SEARCH    = NO
> +
> +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
> +# script for searching. Instead the search results are written to an XML file
> +# which needs to be processed by an external indexer. Doxygen will invoke an
> +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
> +# search results.
> +#
> +# Doxygen ships with an example indexer (doxyindexer) and search engine
> +# (doxysearch.cgi) which are based on the open source search engine library
> +# Xapian (see: https://xapian.org/).
> +#
> +# See the section "External Indexing and Searching" for details.
> +# The default value is: NO.
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +EXTERNAL_SEARCH        = NO
> +
> +# The SEARCHENGINE_URL should point to a search engine hosted by a web server
> +# which will return the search results when EXTERNAL_SEARCH is enabled.
> +#
> +# Doxygen ships with an example indexer (doxyindexer) and search engine
> +# (doxysearch.cgi) which are based on the open source search engine library
> +# Xapian (see: https://xapian.org/). See the section "External Indexing and
> +# Searching" for details.
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +SEARCHENGINE_URL       =
> +
> +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
> +# search data is written to a file for indexing by an external tool. With the
> +# SEARCHDATA_FILE tag the name of this file can be specified.
> +# The default file is: searchdata.xml.
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +SEARCHDATA_FILE        = searchdata.xml
> +
> +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
> +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
> +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
> +# projects and redirect the results back to the right project.
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +EXTERNAL_SEARCH_ID     =
> +
> +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
> +# projects other than the one defined by this configuration file, but that are
> +# all added to the same external search index. Each project needs to have a
> +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
> +# to a relative location where the documentation can be found. The format is:
> +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +EXTRA_SEARCH_MAPPINGS  =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the LaTeX output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
> +# The default value is: YES.
> +
> +GENERATE_LATEX         = NO
> +
> +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
> +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
> +# it.
> +# The default directory is: latex.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_OUTPUT           = latex
> +
> +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
> +# invoked.
> +#
> +# Note that when enabling USE_PDFLATEX this option is only used for generating
> +# bitmaps for formulas in the HTML output, but not in the Makefile that is
> +# written to the output directory.
> +# The default file is: latex.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_CMD_NAME         = latex
> +
> +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
> +# index for LaTeX.
> +# The default file is: makeindex.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +MAKEINDEX_CMD_NAME     = makeindex
> +
> +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
> +# documents. This may be useful for small projects and may help to save some
> +# trees in general.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +COMPACT_LATEX          = NO
> +
> +# The PAPER_TYPE tag can be used to set the paper type that is used by the
> +# printer.
> +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
> +# 14 inches) and executive (7.25 x 10.5 inches).
> +# The default value is: a4.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +PAPER_TYPE             = a4
> +
> +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
> +# that should be included in the LaTeX output. The package can be specified just
> +# by its name or with the correct syntax as to be used with the LaTeX
> +# \usepackage command. To get the times font for instance you can specify :
> +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
> +# To use the option intlimits with the amsmath package you can specify:
> +# EXTRA_PACKAGES=[intlimits]{amsmath}
> +# If left blank no extra packages will be included.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +EXTRA_PACKAGES         =
> +
> +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
> +# generated LaTeX document. The header should contain everything until the first
> +# chapter. If it is left blank doxygen will generate a standard header. See
> +# section "Doxygen usage" for information on how to let doxygen write the
> +# default header to a separate file.
> +#
> +# Note: Only use a user-defined header if you know what you are doing! The
> +# following commands have a special meaning inside the header: $title,
> +# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
> +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
> +# string, for the replacement values of the other commands the user is referred
> +# to HTML_HEADER.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_HEADER           =
> +
> +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
> +# generated LaTeX document. The footer should contain everything after the last
> +# chapter. If it is left blank doxygen will generate a standard footer. See
> +# LATEX_HEADER for more information on how to generate a default footer and what
> +# special commands can be used inside the footer.
> +#
> +# Note: Only use a user-defined footer if you know what you are doing!
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_FOOTER           =
> +
> +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
> +# other source files which should be copied to the LATEX_OUTPUT output
> +# directory. Note that the files will be copied as-is; there are no commands or
> +# markers available.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_EXTRA_FILES      =
> +
> +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
> +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
> +# contain links (just like the HTML output) instead of page references. This
> +# makes the output suitable for online browsing using a PDF viewer.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +PDF_HYPERLINKS         = YES
> +
> +# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
> +# the PDF file directly from the LaTeX files. Set this option to YES, to get a
> +# higher quality PDF documentation.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +USE_PDFLATEX           = YES
> +
> +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
> +# command to the generated LaTeX files. This will instruct LaTeX to keep running
> +# if errors occur, instead of asking the user for help. This option is also used
> +# when generating formulas in HTML.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_BATCHMODE        = NO
> +
> +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
> +# index chapters (such as File Index, Compound Index, etc.) in the output.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_HIDE_INDICES     = NO
> +
> +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
> +# code with syntax highlighting in the LaTeX output.
> +#
> +# Note that which sources are shown also depends on other settings such as
> +# SOURCE_BROWSER.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_SOURCE_CODE      = NO
> +
> +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
> +# bibliography, e.g. plainnat, or ieeetr. See
> +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
> +# The default value is: plain.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_BIB_STYLE        = plain
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the RTF output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
> +# RTF output is optimized for Word 97 and may not look too pretty with other RTF
> +# readers/editors.
> +# The default value is: NO.
> +
> +GENERATE_RTF           = NO
> +
> +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
> +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
> +# it.
> +# The default directory is: rtf.
> +# This tag requires that the tag GENERATE_RTF is set to YES.
> +
> +RTF_OUTPUT             = rtf
> +
> +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
> +# documents. This may be useful for small projects and may help to save some
> +# trees in general.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_RTF is set to YES.
> +
> +COMPACT_RTF            = NO
> +
> +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
> +# contain hyperlink fields. The RTF file will contain links (just like the HTML
> +# output) instead of page references. This makes the output suitable for online
> +# browsing using Word or some other Word compatible readers that support those
> +# fields.
> +#
> +# Note: WordPad (write) and others do not support links.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_RTF is set to YES.
> +
> +RTF_HYPERLINKS         = YES
> +
> +# Load stylesheet definitions from file. Syntax is similar to doxygen's config
> +# file, i.e. a series of assignments. You only have to provide replacements,
> +# missing definitions are set to their default value.
> +#
> +# See also section "Doxygen usage" for information on how to generate the
> +# default style sheet that doxygen normally uses.
> +# This tag requires that the tag GENERATE_RTF is set to YES.
> +
> +RTF_STYLESHEET_FILE    =
> +
> +# Set optional variables used in the generation of an RTF document. Syntax is
> +# similar to doxygen's config file. A template extensions file can be generated
> +# using doxygen -e rtf extensionFile.
> +# This tag requires that the tag GENERATE_RTF is set to YES.
> +
> +RTF_EXTENSIONS_FILE    =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the man page output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
> +# classes and files.
> +# The default value is: NO.
> +
> +GENERATE_MAN           = NO
> +
> +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
> +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
> +# it. A directory man3 will be created inside the directory specified by
> +# MAN_OUTPUT.
> +# The default directory is: man.
> +# This tag requires that the tag GENERATE_MAN is set to YES.
> +
> +MAN_OUTPUT             = man
> +
> +# The MAN_EXTENSION tag determines the extension that is added to the generated
> +# man pages. In case the manual section does not start with a number, the number
> +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
> +# optional.
> +# The default value is: .3.
> +# This tag requires that the tag GENERATE_MAN is set to YES.
> +
> +MAN_EXTENSION          = .3
> +
> +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
> +# will generate one additional man file for each entity documented in the real
> +# man page(s). These additional files only source the real man page, but without
> +# them the man command would be unable to find the correct page.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_MAN is set to YES.
> +
> +MAN_LINKS              = NO
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the XML output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
> +# captures the structure of the code including all documentation.
> +# The default value is: NO.
> +
> +GENERATE_XML           = YES
> +
> +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
> +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
> +# it.
> +# The default directory is: xml.
> +# This tag requires that the tag GENERATE_XML is set to YES.
> +
> +XML_OUTPUT             = xml
> +
> +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
> +# listings (including syntax highlighting and cross-referencing information) to
> +# the XML output. Note that enabling this will significantly increase the size
> +# of the XML output.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_XML is set to YES.
> +
> +XML_PROGRAMLISTING     = YES
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the DOCBOOK output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
> +# that can be used to generate PDF.
> +# The default value is: NO.
> +
> +GENERATE_DOCBOOK       = NO
> +
> +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
> +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
> +# front of it.
> +# The default directory is: docbook.
> +# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
> +
> +DOCBOOK_OUTPUT         = docbook
> +
> +#---------------------------------------------------------------------------
> +# Configuration options for the AutoGen Definitions output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
> +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
> +# the structure of the code including all documentation. Note that this feature
> +# is still experimental and incomplete at the moment.
> +# The default value is: NO.
> +
> +GENERATE_AUTOGEN_DEF   = NO
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the Perl module output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
> +# file that captures the structure of the code including all documentation.
> +#
> +# Note that this feature is still experimental and incomplete at the moment.
> +# The default value is: NO.
> +
> +GENERATE_PERLMOD       = NO
> +
> +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
> +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
> +# output from the Perl module output.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_PERLMOD is set to YES.
> +
> +PERLMOD_LATEX          = NO
> +
> +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
> +# formatted so it can be parsed by a human reader. This is useful if you want to
> +# understand what is going on. On the other hand, if this tag is set to NO, the
> +# size of the Perl module output will be much smaller and Perl will parse it
> +# just the same.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_PERLMOD is set to YES.
> +
> +PERLMOD_PRETTY         = YES
> +
> +# The names of the make variables in the generated doxyrules.make file are
> +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
> +# so different doxyrules.make files included by the same Makefile don't
> +# overwrite each other's variables.
> +# This tag requires that the tag GENERATE_PERLMOD is set to YES.
> +
> +PERLMOD_MAKEVAR_PREFIX =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the preprocessor
> +#---------------------------------------------------------------------------
> +
> +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
> +# C-preprocessor directives found in the sources and include files.
> +# The default value is: YES.
> +
> +ENABLE_PREPROCESSING   = YES
> +
> +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
> +# in the source code. If set to NO, only conditional compilation will be
> +# performed. Macro expansion can be done in a controlled way by setting
> +# EXPAND_ONLY_PREDEF to YES.
> +# The default value is: NO.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +MACRO_EXPANSION        = YES
> +
> +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
> +# the macro expansion is limited to the macros specified with the PREDEFINED and
> +# EXPAND_AS_DEFINED tags.
> +# The default value is: NO.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +EXPAND_ONLY_PREDEF     = NO
> +
> +# If the SEARCH_INCLUDES tag is set to YES, the include files in the
> +# INCLUDE_PATH will be searched if a #include is found.
> +# The default value is: YES.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +SEARCH_INCLUDES        = YES
> +
> +# The INCLUDE_PATH tag can be used to specify one or more directories that
> +# contain include files that are not input files but should be processed by the
> +# preprocessor.
> +# This tag requires that the tag SEARCH_INCLUDES is set to YES.
> +
> +INCLUDE_PATH           = "@XEN_BASE@/xen/include/generated" \
> +                         "@XEN_BASE@/xen/include/"
> +
> +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
> +# patterns (like *.h and *.hpp) to filter out the header-files in the
> +# directories. If left blank, the patterns specified with FILE_PATTERNS will be
> +# used.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +INCLUDE_FILE_PATTERNS  =
> +
> +# The PREDEFINED tag can be used to specify one or more macro names that are
> +# defined before the preprocessor is started (similar to the -D option of e.g.
> +# gcc). The argument of the tag is a list of macros of the form: name or
> +# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
> +# is assumed. To prevent a macro definition from being undefined via #undef or
> +# recursively expanded use the := operator instead of the = operator.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +PREDEFINED             = __attribute__(x)= \
> +                         DOXYGEN \
> +                         __XEN__
> +
> +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
> +# tag can be used to specify a list of macro names that should be expanded. The
> +# macro definition that is found in the sources will be used. Use the PREDEFINED
> +# tag if you want to use a different macro definition that overrules the
> +# definition found in the source code.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +EXPAND_AS_DEFINED      =
> +
> +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
> +# remove all references to function-like macros that are alone on a line, have
> +# an all uppercase name, and do not end with a semicolon. Such function macros
> +# are typically used for boiler-plate code, and will confuse the parser if not
> +# removed.
> +# The default value is: YES.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +SKIP_FUNCTION_MACROS   = NO
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to external references
> +#---------------------------------------------------------------------------
> +
> +# The TAGFILES tag can be used to specify one or more tag files. For each tag
> +# file the location of the external documentation should be added. The format of
> +# a tag file without this location is as follows:
> +# TAGFILES = file1 file2 ...
> +# Adding location for the tag files is done as follows:
> +# TAGFILES = file1=loc1 "file2 = loc2" ...
> +# where loc1 and loc2 can be relative or absolute paths or URLs. See the
> +# section "Linking to external documentation" for more information about the use
> +# of tag files.
> +# Note: Each tag file must have a unique name (where the name does NOT include
> +# the path). If a tag file is not located in the directory in which doxygen is
> +# run, you must also specify the path to the tagfile here.
> +
> +TAGFILES               =
> +
> +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
> +# tag file that is based on the input files it reads. See section "Linking to
> +# external documentation" for more information about the usage of tag files.
> +
> +GENERATE_TAGFILE       =
> +
> +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
> +# the class index. If set to NO, only the inherited external classes will be
> +# listed.
> +# The default value is: NO.
> +
> +ALLEXTERNALS           = NO
> +
> +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
> +# in the modules index. If set to NO, only the current project's groups will be
> +# listed.
> +# The default value is: YES.
> +
> +EXTERNAL_GROUPS        = YES
> +
> +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
> +# the related pages index. If set to NO, only the current project's pages will
> +# be listed.
> +# The default value is: YES.
> +
> +EXTERNAL_PAGES         = YES
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the dot tool
> +#---------------------------------------------------------------------------
> +
> +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
> +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
> +# NO turns the diagrams off. Note that this option also works with HAVE_DOT
> +# disabled, but it is recommended to install and use dot, since it yields more
> +# powerful graphs.
> +# The default value is: YES.
> +
> +CLASS_DIAGRAMS         = NO
> +
> +# You can include diagrams made with dia in doxygen documentation. Doxygen will
> +# then run dia to produce the diagram and insert it in the documentation. The
> +# DIA_PATH tag allows you to specify the directory where the dia binary resides.
> +# If left empty dia is assumed to be found in the default search path.
> +
> +DIA_PATH               =
> +
> +# If set to YES the inheritance and collaboration graphs will hide inheritance
> +# and usage relations if the target is undocumented or is not a class.
> +# The default value is: YES.
> +
> +HIDE_UNDOC_RELATIONS   = YES
> +
> +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
> +# available from the path. This tool is part of Graphviz (see:
> +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
> +# Bell Labs. The other options in this section have no effect if this option is
> +# set to NO
> +# The default value is: NO.
> +
> +HAVE_DOT               = NO
> +
> +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
> +# to run in parallel. When set to 0 doxygen will base this on the number of
> +# processors available in the system. You can set it explicitly to a value
> +# larger than 0 to get control over the balance between CPU load and processing
> +# speed.
> +# Minimum value: 0, maximum value: 32, default value: 0.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_NUM_THREADS        = 0
> +
> +# When you want a differently looking font in the dot files that doxygen
> +# generates you can specify the font name using DOT_FONTNAME. You need to make
> +# sure dot is able to find the font, which can be done by putting it in a
> +# standard location or by setting the DOTFONTPATH environment variable or by
> +# setting DOT_FONTPATH to the directory containing the font.
> +# The default value is: Helvetica.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_FONTNAME           = Helvetica
> +
> +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
> +# dot graphs.
> +# Minimum value: 4, maximum value: 24, default value: 10.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_FONTSIZE           = 10
> +
> +# By default doxygen will tell dot to use the default font as specified with
> +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
> +# the path where dot can find it using this tag.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_FONTPATH           =
> +
> +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
> +# each documented class showing the direct and indirect inheritance relations.
> +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +CLASS_GRAPH            = YES
> +
> +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
> +# graph for each documented class showing the direct and indirect implementation
> +# dependencies (inheritance, containment, and class references variables) of the
> +# class with other documented classes.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +COLLABORATION_GRAPH    = YES
> +
> +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
> +# groups, showing the direct groups dependencies.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +GROUP_GRAPHS           = YES
> +
> +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
> +# collaboration diagrams in a style similar to the OMG's Unified Modeling
> +# Language.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +UML_LOOK               = NO
> +
> +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
> +# class node. If there are many fields or methods and many nodes the graph may
> +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
> +# number of items for each type to make the size more manageable. Set this to 0
> +# for no limit. Note that the threshold may be exceeded by 50% before the limit
> +# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
> +# but if the number exceeds 15, the total amount of fields shown is limited to
> +# 10.
> +# Minimum value: 0, maximum value: 100, default value: 10.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +UML_LIMIT_NUM_FIELDS   = 10
> +
> +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
> +# collaboration graphs will show the relations between templates and their
> +# instances.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +TEMPLATE_RELATIONS     = NO
> +
> +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
> +# YES then doxygen will generate a graph for each documented file showing the
> +# direct and indirect include dependencies of the file with other documented
> +# files.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +INCLUDE_GRAPH          = YES
> +
> +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
> +# set to YES then doxygen will generate a graph for each documented file showing
> +# the direct and indirect include dependencies of the file with other documented
> +# files.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +INCLUDED_BY_GRAPH      = YES
> +
> +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
> +# dependency graph for every global function or class method.
> +#
> +# Note that enabling this option will significantly increase the time of a run.
> +# So in most cases it will be better to enable call graphs for selected
> +# functions only using the \callgraph command. Disabling a call graph can be
> +# accomplished by means of the command \hidecallgraph.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +CALL_GRAPH             = NO
> +
> +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
> +# dependency graph for every global function or class method.
> +#
> +# Note that enabling this option will significantly increase the time of a run.
> +# So in most cases it will be better to enable caller graphs for selected
> +# functions only using the \callergraph command. Disabling a caller graph can be
> +# accomplished by means of the command \hidecallergraph.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +CALLER_GRAPH           = NO
> +
> +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
> +# hierarchy of all classes instead of a textual one.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +GRAPHICAL_HIERARCHY    = YES
> +
> +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
> +# dependencies a directory has on other directories in a graphical way. The
> +# dependency relations are determined by the #include relations between the
> +# files in the directories.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DIRECTORY_GRAPH        = YES
> +
> +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
> +# generated by dot. For an explanation of the image formats see the section
> +# output formats in the documentation of the dot tool (Graphviz (see:
> +# http://www.graphviz.org/)).
> +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
> +# to make the SVG files visible in IE 9+ (other browsers do not have this
> +# requirement).
> +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
> +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
> +# png:gdiplus:gdiplus.
> +# The default value is: png.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_IMAGE_FORMAT       = png
> +
> +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
> +# enable generation of interactive SVG images that allow zooming and panning.
> +#
> +# Note that this requires a modern browser other than Internet Explorer. Tested
> +# and working are Firefox, Chrome, Safari, and Opera.
> +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
> +# the SVG files visible. Older versions of IE do not have SVG support.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +INTERACTIVE_SVG        = NO
> +
> +# The DOT_PATH tag can be used to specify the path where the dot tool can be
> +# found. If left blank, it is assumed the dot tool can be found in the path.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_PATH               =
> +
> +# The DOTFILE_DIRS tag can be used to specify one or more directories that
> +# contain dot files that are included in the documentation (see the \dotfile
> +# command).
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOTFILE_DIRS           =
> +
> +# The MSCFILE_DIRS tag can be used to specify one or more directories that
> +# contain msc files that are included in the documentation (see the \mscfile
> +# command).
> +
> +MSCFILE_DIRS           =
> +
> +# The DIAFILE_DIRS tag can be used to specify one or more directories that
> +# contain dia files that are included in the documentation (see the \diafile
> +# command).
> +
> +DIAFILE_DIRS           =
> +
> +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
> +# that will be shown in the graph. If the number of nodes in a graph becomes
> +# larger than this value, doxygen will truncate the graph, which is visualized
> +# by representing a node as a red box. Note that doxygen if the number of direct
> +# children of the root node in a graph is already larger than
> +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
> +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
> +# Minimum value: 0, maximum value: 10000, default value: 50.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_GRAPH_MAX_NODES    = 50
> +
> +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
> +# generated by dot. A depth value of 3 means that only nodes reachable from the
> +# root by following a path via at most 3 edges will be shown. Nodes that lay
> +# further from the root node will be omitted. Note that setting this option to 1
> +# or 2 may greatly reduce the computation time needed for large code bases. Also
> +# note that the size of a graph can be further restricted by
> +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
> +# Minimum value: 0, maximum value: 1000, default value: 0.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +MAX_DOT_GRAPH_DEPTH    = 0
> +
> +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
> +# background. This is disabled by default, because dot on Windows does not seem
> +# to support this out of the box.
> +#
> +# Warning: Depending on the platform used, enabling this option may lead to
> +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
> +# read).
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_TRANSPARENT        = NO
> +
> +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
> +# files in one run (i.e. multiple -o and -T options on the command line). This
> +# makes dot run faster, but since only newer versions of dot (>1.8.10) support
> +# this, this feature is disabled by default.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_MULTI_TARGETS      = NO
> +
> +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
> +# explaining the meaning of the various boxes and arrows in the dot generated
> +# graphs.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +GENERATE_LEGEND        = YES
> +
> +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
> +# files that are used to generate the various graphs.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_CLEANUP            = YES
> diff --git a/m4/ax_python_module.m4 b/m4/ax_python_module.m4
> new file mode 100644
> index 0000000000..107d88264a
> --- /dev/null
> +++ b/m4/ax_python_module.m4
> @@ -0,0 +1,56 @@
> +# ===========================================================================
> +#     https://www.gnu.org/software/autoconf-archive/ax_python_module.html
> +# ===========================================================================
> +#
> +# SYNOPSIS
> +#
> +#   AX_PYTHON_MODULE(modname[, fatal, python])
> +#
> +# DESCRIPTION
> +#
> +#   Checks for Python module.
> +#
> +#   If fatal is non-empty then absence of a module will trigger an error.
> +#   The third parameter can either be "python" for Python 2 or "python3" for
> +#   Python 3; defaults to Python 3.
> +#
> +# LICENSE
> +#
> +#   Copyright (c) 2008 Andrew Collier
> +#
> +#   Copying and distribution of this file, with or without modification, are
> +#   permitted in any medium without royalty provided the copyright notice
> +#   and this notice are preserved. This file is offered as-is, without any
> +#   warranty.
> +
> +#serial 9
> +
> +AU_ALIAS([AC_PYTHON_MODULE], [AX_PYTHON_MODULE])
> +AC_DEFUN([AX_PYTHON_MODULE],[
> +    if test -z $PYTHON;
> +    then
> +        if test -z "$3";
> +        then
> +            PYTHON="python3"
> +        else
> +            PYTHON="$3"
> +        fi
> +    fi
> +    PYTHON_NAME=`basename $PYTHON`
> +    AC_MSG_CHECKING($PYTHON_NAME module: $1)
> +    $PYTHON -c "import $1" 2>/dev/null
> +    if test $? -eq 0;
> +    then
> +        AC_MSG_RESULT(yes)
> +        eval AS_TR_CPP(HAVE_PYMOD_$1)=yes
> +    else
> +        AC_MSG_RESULT(no)
> +        eval AS_TR_CPP(HAVE_PYMOD_$1)=no
> +        #
> +        if test -n "$2"
> +        then
> +            AC_MSG_ERROR(failed to find required module $1)
> +            exit 1
> +        fi
> +    fi
> +])
> \ No newline at end of file
> diff --git a/m4/docs_tool.m4 b/m4/docs_tool.m4
> index 3e8814ac8d..39aa348026 100644
> --- a/m4/docs_tool.m4
> +++ b/m4/docs_tool.m4
> @@ -15,3 +15,12 @@ dnl
>          AC_MSG_WARN([$2 is not available so some documentation won't be built])
>      ])
>  ])
> +
> +AC_DEFUN([AX_DOCS_TOOL_REQ_PROG], [
> +dnl
> +    AC_ARG_VAR([$1], [Path to $2 tool])
> +    AC_PATH_PROG([$1], [$2])
> +    AS_IF([! test -x "$ac_cv_path_$1"], [
> +        AC_MSG_ERROR([$2 is needed])
> +    ])
> +])
> \ No newline at end of file
> -- 
> 2.17.1
>