From: Ross Lagerwall <ross.lagerwall@citrix.com>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xen.org
Subject: Re: [PATCH 2/3] Update to use a .config file
Date: Mon, 18 Jul 2016 10:33:49 +0100 [thread overview]
Message-ID: <b05566c2-a9c8-6c43-a0e1-0ad2a58d9cc7@citrix.com> (raw)
In-Reply-To: <20160716015522.GB18828@char.us.oracle.com>
On 07/16/2016 02:55 AM, Konrad Rzeszutek Wilk wrote:
>>> OK, I'll split it into two. Feel free to create a stable-47 branch in
>>> livepatch-build-tools.git with only the .config patch. Personally, I'd
>>> rather not spend much time backporting stuff to support a tech preview
>>> feature on an older branch.
>>
>> We will need to update the Wiki a bit too...
>>
>> What if I we do something simpler?
>
> And the offical patch:
>
> From 929a92b3dbb8467e0a69b50706b69fb206b51ff3 Mon Sep 17 00:00:00 2001
> From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> Date: Fri, 15 Jul 2016 09:36:23 -0400
> Subject: [PATCH] Check .config for CONFIG_DEBUG. If not found use --xen-debug
> (if specified)
>
> Xen 4.8 ditched the 'debug=y' and now has CONFIG_DEBUG in the
> .config. To still support 4.7 lets just poke the .config
> file and see.
>
> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Is the intention that this gets applied on top of "[PATCH
LIVEPATCH-BUILD-TOOLS v2 1/3] Update to use a .config file" and that
"[PATCH LIVEPATCH-BUILD-TOOLS v2 2/3] Remove --xen-debug" is dropped?
If so, then the approach looks OK to me.
> ---
> livepatch-build | 20 +++++++++++++++++---
> 1 file changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/livepatch-build b/livepatch-build
> index 6254c29..2165e3b 100755
> --- a/livepatch-build
> +++ b/livepatch-build
> @@ -66,7 +66,7 @@ function build_full()
> {
> cd "${SRCDIR}/xen" || die
> make "-j$CPUS" clean &> "${OUTPUT}/build_full_clean.log" || die
> - make "-j$CPUS" debug="$XEN_DEBUG" &> "${OUTPUT}/build_full_compile.log" || die
> + make "-j$CPUS" "$XEN_DEBUG" &> "${OUTPUT}/build_full_compile.log" || die
$XEN_DEBUG needs to be unquoted, otherwise you get a build error from make:
make: *** empty string invalid as file name. Stop.
> cp xen-syms "$OUTPUT"
> }
>
> @@ -87,7 +87,7 @@ function build_special()
> cd "${SRCDIR}/xen" || die
> sed -i 's/CFLAGS += -nostdinc/CFLAGS += -nostdinc -ffunction-sections -fdata-sections/' Rules.mk
> sed -i 's/--section-alignment=0x200000/--section-alignment=0x1000/' arch/x86/Makefile
> - make "-j$CPUS" debug="$XEN_DEBUG" &> "${OUTPUT}/build_${name}_compile.log" || die
> + make "-j$CPUS" "$XEN_DEBUG" &> "${OUTPUT}/build_${name}_compile.log" || die
Same here.
> sed -i 's/CFLAGS += -nostdinc -ffunction-sections -fdata-sections/CFLAGS += -nostdinc/' Rules.mk
> sed -i 's/--section-alignment=0x1000/--section-alignment=0x200000/' arch/x86/Makefile
>
> @@ -165,7 +165,7 @@ usage() {
> echo " -j, --cpus Number of CPUs to use" >&2
> echo " -k, --skip Skip build or diff phase" >&2
> echo " -d, --debug Enable debug logging" >&2
> - echo " --xen-debug Build debug Xen" >&2
> + echo " --xen-debug Build debug Xen (if your .config does not have the options)" >&2
> echo " --xen-syms Build against a xen-syms" >&2
> echo " --depends Required build-id" >&2
> echo " --prelink Prelink" >&2
> @@ -277,6 +277,20 @@ if [ "${SKIP}" != "build" ]; then
> cp -f "${CONFIGFILE}" "${OUTPUT}/.config"
> cp -f "${OUTPUT}/.config" "xen/.config"
>
> + grep -q CONFIG_DEBUG "xen/.config"
> + if [ $? -eq 0 ]; then
> + if [ "$XEN_DEBUG" == "y" ]; then
> + grep -q "CONFIG_DEBUG=y" "xen/.config"
> + if [ $? -ne 0 ]; then
> + echo "CONFIG_DEBUG and --xen-debug mismatch!"
> + die
> + fi
This would be cleaner as a oneliner:
grep -q "CONFIG_DEBUG=y" "xen/.config" || die "CONFIG_DEBUG and
--xen-debug mismatch!"
--
Ross Lagerwall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-07-18 9:33 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-10 11:02 [PATCH 1/3] Don't accept fuzz when patching Ross Lagerwall
2016-06-10 11:02 ` [PATCH 2/3] Update to use a .config file Ross Lagerwall
2016-06-14 15:35 ` Konrad Rzeszutek Wilk
2016-06-15 8:08 ` Ross Lagerwall
2016-06-15 14:00 ` Konrad Rzeszutek Wilk
2016-07-14 8:05 ` Ross Lagerwall
2016-07-15 13:36 ` Konrad Rzeszutek Wilk
2016-07-16 1:55 ` Konrad Rzeszutek Wilk
2016-07-18 9:33 ` Ross Lagerwall [this message]
2016-07-18 10:28 ` Konrad Rzeszutek Wilk
2016-06-10 11:02 ` [PATCH 3/3] Update README.md Ross Lagerwall
2016-06-14 15:36 ` Konrad Rzeszutek Wilk
2016-06-13 10:08 ` [PATCH 1/3] Don't accept fuzz when patching George Dunlap
2016-06-13 10:16 ` Andrew Cooper
2016-06-13 10:57 ` George Dunlap
2016-06-13 10:23 ` Ross Lagerwall
2016-06-14 15:33 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b05566c2-a9c8-6c43-a0e1-0ad2a58d9cc7@citrix.com \
--to=ross.lagerwall@citrix.com \
--cc=konrad.wilk@oracle.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).