Re: [PATCH V3 1/2] Drivers/PCI: Export pcie_has_flr() interface

[Alexey Kardashevskiy <aik@ozlabs.ru>]

On 16/12/17 05:18, Bjorn Helgaas wrote:
> [+cc Russell, Sinan, Herbert, Srikanth, Derek, Satanand, Felix, Raghu]
> 
> On Fri, Dec 15, 2017 at 09:48:02AM -0600, Govinda Tatti wrote:
>> On 12/13/2017 3:24 PM, Bjorn Helgaas wrote:
>>> On Wed, Dec 13, 2017 at 02:46:57PM -0600, Govinda Tatti wrote:
> 
>>>>>>>> -static bool pcie_has_flr(struct pci_dev *dev)
>>>>>>>> +bool pcie_has_flr(struct pci_dev *dev)
>>>>>>>>  {
>>>>>>>>  	u32 cap;
>>>>>>>> @@ -3882,6 +3882,7 @@ static bool pcie_has_flr(struct pci_dev *dev)
>>>>>>>>  	pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
>>>>>>>>  	return cap & PCI_EXP_DEVCAP_FLR;
>>>>>>>>  }
>>>>>>>> +EXPORT_SYMBOL_GPL(pcie_has_flr);
> 
>>>>>>> I'd rather change pcie_flr() so you could *always* call it, and
>>>>>>> it would return 0, -ENOTTY, or whatever, based on whether FLR
>>>>>>> is supported.  Is that feasible?
> 
>>>>>> Sure, I will add pcie_has_flr() logic inside pcie_flr() and
>>>>>> return appropriate values as suggested by you. Do we still want
>>>>>> to retain pcie_has_flr() and its usage inside pci.c?.Otherwise,
>>>>>> I will remove it and do required cleanup.
> 
>>>>> If you can restructure the code and remove pcie_has_flr() while
>>>>> retaining the existing behavior of its callers, that would be
>>>>> great.
> 
>>>> I checked the current usage of pcie_has_flr() and pcie_flr(). I
>>>> have a couple of questions or need some clarification.
>>>>
>>>> 1. pcie_has_flr() usage inside pci_probe_reset_function().
>>>>
>>>>    This function is only calling pcie_has_flr() but not pcie_flr().
>>>>    Rest of the code is trying to do specific type of reset except
>>>>    pcie_flr().
>>>>
>>>>         rc = pci_dev_specific_reset(dev, 1);
>>>>         if (rc != -ENOTTY)
>>>>                 return rc;
>>>>         if (pcie_has_flr(dev))
>>>>                 return 0;
>>>>         rc = pci_af_flr(dev, 1);
>>>>         if (rc != -ENOTTY)
>>>>                 return rc;
>>>>
>>>>    In other-words, I can remove usage of pcie_has_flr() in all
>>>>    other places in pci.c except in above function.
> 
>>> I think we should keep the EXPORT_SYMBOL_GPL() part of a60a2b73ba69
>>> ("PCI: Export pcie_flr()"), but revert the restructuring part.
>>>
>>> Prior to a60a2b73ba69, we had
>>>
>>>   int pcie_flr(struct pci_dev *dev, int probe);
>>>
>>> like all the other reset methods.  AFAICT, the addition of
>>> pcie_has_flr() was to optimize the path slightly because when
>>> drivers call pcie_flr(), they should already know that their
>>> hardware supports FLR.  But I don't think that optimization is
>>> worth the extra code complexity.  If we do need to optimize it, we
>>> can check this in the core during enumeration and set
>>> PCI_DEV_FLAGS_NO_FLR_RESET accordingly.
> 
>> Not all code paths are aware of FLR capability and also, not
>> using pcie_flr().  For example,
>>
>> arch/powerpc/platforms/powernv/eeh-powernv.c
> 
> I assume you're referring to pnv_eeh_do_flr() (which contains code similar
> to pcie_flr()) and pnv_eeh_do_af_flr() (which has code similar to
> pci_af_flr()).  I agree that those are problematic and would ideally be
> unified with the PCI core implementations.
> 
> Powerpc has quite a bit of this sort of special-case code for several
> reasons, some just historical and some more concrete, so I don't know how
> feasible this is.

It would be lovely if pnv-eeh code used pci_af_flr() but since
pnv_eeh_do_flr() uses different config space accessors (not sure why
exactly, probably to avoid freezing the entire PHB), it is harder than just
trivial change. I'll try and have a deeper look though.


-- 
Alexey

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel