xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Michal Orzel <michal.orzel@arm.com>
To: Julien Grall <julien@xen.org>, xen-devel@lists.xenproject.org
Cc: Stefano Stabellini <sstabellini@kernel.org>,
	Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>,
	bertrand.marquis@arm.com
Subject: Re: [PATCH 3/9] arm/gic: Get rid of READ/WRITE_SYSREG32
Date: Wed, 21 Apr 2021 09:48:53 +0200	[thread overview]
Message-ID: <fd5924c5-685d-a9fc-1116-c1b8909c9aea@arm.com> (raw)
In-Reply-To: <1a087bed-94e5-bada-76c4-92e0c429cce6@xen.org>

Hi Julien,

On 20.04.2021 15:28, Julien Grall wrote:
> Hi Michal,
> 
> On 20/04/2021 08:08, Michal Orzel wrote:
>> AArch64 system registers are 64bit whereas AArch32 ones
>> are 32bit or 64bit. MSR/MRS are expecting 64bit values thus
>> we should get rid of helpers READ/WRITE_SYSREG32
>> in favour of using READ/WRITE_SYSREG.
>> We should also use register_t type when reading sysregs
>> which can correspond to uint64_t or uint32_t.
>> Even though many AArch64 sysregs have upper 32bit reserved
>> it does not mean that they can't be widen in the future.
>>
>> Modify types of following members of struct gic_v3 to register_t:
>> -hcr(not used at all in Xen)
> 
> It looks like we never used it (even in the patch introducing it). So I would suggest to remove it in a patch before this one.
>
Ok. In v2 I will add a patch before this one removing hcr from gic_v3.
>> -vmcr
>> -sre_el1
>> -apr0
>> -apr1
>>
>> Signed-off-by: Michal Orzel <michal.orzel@arm.com>
>> ---
>>   xen/arch/arm/gic-v3-lpi.c |  2 +-
>>   xen/arch/arm/gic-v3.c     | 96 ++++++++++++++++++++-------------------
>>   xen/include/asm-arm/gic.h |  6 +--
>>   3 files changed, 54 insertions(+), 50 deletions(-)
>>
>> diff --git a/xen/arch/arm/gic-v3-lpi.c b/xen/arch/arm/gic-v3-lpi.c
>> index 869bc97fa1..e1594dd20e 100644
>> --- a/xen/arch/arm/gic-v3-lpi.c
>> +++ b/xen/arch/arm/gic-v3-lpi.c
>> @@ -178,7 +178,7 @@ void gicv3_do_LPI(unsigned int lpi)
>>       irq_enter();
>>         /* EOI the LPI already. */
>> -    WRITE_SYSREG32(lpi, ICC_EOIR1_EL1);
>> +    WRITE_SYSREG(lpi, ICC_EOIR1_EL1);
>>         /* Find out if a guest mapped something to this physical LPI. */
>>       hlpip = gic_get_host_lpi(lpi);
>> diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
>> index ac28013c19..0634013a67 100644
>> --- a/xen/arch/arm/gic-v3.c
>> +++ b/xen/arch/arm/gic-v3.c
>> @@ -246,12 +246,12 @@ static void gicv3_ich_write_lr(int lr, uint64_t val)
>>    */
>>   static void gicv3_enable_sre(void)
>>   {
>> -    uint32_t val;
>> +    register_t val;
>>   -    val = READ_SYSREG32(ICC_SRE_EL2);
>> +    val = READ_SYSREG(ICC_SRE_EL2);
>>       val |= GICC_SRE_EL2_SRE;
>>   -    WRITE_SYSREG32(val, ICC_SRE_EL2);
>> +    WRITE_SYSREG(val, ICC_SRE_EL2);
>>       isb();
>>   }
>>   @@ -315,16 +315,16 @@ static void restore_aprn_regs(const union gic_state_data *d)
>>       switch ( gicv3.nr_priorities )
>>       {
>>       case 7:
>> -        WRITE_SYSREG32(d->v3.apr0[2], ICH_AP0R2_EL2);
>> -        WRITE_SYSREG32(d->v3.apr1[2], ICH_AP1R2_EL2);
>> +        WRITE_SYSREG(d->v3.apr0[2], ICH_AP0R2_EL2);
>> +        WRITE_SYSREG(d->v3.apr1[2], ICH_AP1R2_EL2);
>>           /* Fall through */
>>       case 6:
>> -        WRITE_SYSREG32(d->v3.apr0[1], ICH_AP0R1_EL2);
>> -        WRITE_SYSREG32(d->v3.apr1[1], ICH_AP1R1_EL2);
>> +        WRITE_SYSREG(d->v3.apr0[1], ICH_AP0R1_EL2);
>> +        WRITE_SYSREG(d->v3.apr1[1], ICH_AP1R1_EL2);
>>           /* Fall through */
>>       case 5:
>> -        WRITE_SYSREG32(d->v3.apr0[0], ICH_AP0R0_EL2);
>> -        WRITE_SYSREG32(d->v3.apr1[0], ICH_AP1R0_EL2);
>> +        WRITE_SYSREG(d->v3.apr0[0], ICH_AP0R0_EL2);
>> +        WRITE_SYSREG(d->v3.apr1[0], ICH_AP1R0_EL2);
>>           break;
>>       default:
>>           BUG();
>> @@ -338,16 +338,16 @@ static void save_aprn_regs(union gic_state_data *d)
>>       switch ( gicv3.nr_priorities )
>>       {
>>       case 7:
>> -        d->v3.apr0[2] = READ_SYSREG32(ICH_AP0R2_EL2);
>> -        d->v3.apr1[2] = READ_SYSREG32(ICH_AP1R2_EL2);
>> +        d->v3.apr0[2] = READ_SYSREG(ICH_AP0R2_EL2);
>> +        d->v3.apr1[2] = READ_SYSREG(ICH_AP1R2_EL2);
>>           /* Fall through */
>>       case 6:
>> -        d->v3.apr0[1] = READ_SYSREG32(ICH_AP0R1_EL2);
>> -        d->v3.apr1[1] = READ_SYSREG32(ICH_AP1R1_EL2);
>> +        d->v3.apr0[1] = READ_SYSREG(ICH_AP0R1_EL2);
>> +        d->v3.apr1[1] = READ_SYSREG(ICH_AP1R1_EL2);
>>           /* Fall through */
>>       case 5:
>> -        d->v3.apr0[0] = READ_SYSREG32(ICH_AP0R0_EL2);
>> -        d->v3.apr1[0] = READ_SYSREG32(ICH_AP1R0_EL2);
>> +        d->v3.apr0[0] = READ_SYSREG(ICH_AP0R0_EL2);
>> +        d->v3.apr1[0] = READ_SYSREG(ICH_AP1R0_EL2);
>>           break;
>>       default:
>>           BUG();
>> @@ -371,15 +371,15 @@ static void gicv3_save_state(struct vcpu *v)
>>       dsb(sy);
>>       gicv3_save_lrs(v);
>>       save_aprn_regs(&v->arch.gic);
>> -    v->arch.gic.v3.vmcr = READ_SYSREG32(ICH_VMCR_EL2);
>> -    v->arch.gic.v3.sre_el1 = READ_SYSREG32(ICC_SRE_EL1);
>> +    v->arch.gic.v3.vmcr = READ_SYSREG(ICH_VMCR_EL2);
>> +    v->arch.gic.v3.sre_el1 = READ_SYSREG(ICC_SRE_EL1);
>>   }
>>     static void gicv3_restore_state(const struct vcpu *v)
>>   {
>> -    uint32_t val;
>> +    register_t val;
>>   -    val = READ_SYSREG32(ICC_SRE_EL2);
>> +    val = READ_SYSREG(ICC_SRE_EL2);
>>       /*
>>        * Don't give access to system registers when the guest is using
>>        * GICv2
>> @@ -388,7 +388,7 @@ static void gicv3_restore_state(const struct vcpu *v)
>>           val &= ~GICC_SRE_EL2_ENEL1;
>>       else
>>           val |= GICC_SRE_EL2_ENEL1;
>> -    WRITE_SYSREG32(val, ICC_SRE_EL2);
>> +    WRITE_SYSREG(val, ICC_SRE_EL2);
>>         /*
>>        * VFIQEn is RES1 if ICC_SRE_EL1.SRE is 1. This causes a Group0
>> @@ -398,9 +398,9 @@ static void gicv3_restore_state(const struct vcpu *v)
>>        * want before starting to mess with the rest of the GIC, and
>>        * VMCR_EL1 in particular.
>>        */
>> -    WRITE_SYSREG32(v->arch.gic.v3.sre_el1, ICC_SRE_EL1);
>> +    WRITE_SYSREG(v->arch.gic.v3.sre_el1, ICC_SRE_EL1);
>>       isb();
>> -    WRITE_SYSREG32(v->arch.gic.v3.vmcr, ICH_VMCR_EL2);
>> +    WRITE_SYSREG(v->arch.gic.v3.vmcr, ICH_VMCR_EL2);
>>       restore_aprn_regs(&v->arch.gic);
>>       gicv3_restore_lrs(v);
>>   @@ -468,24 +468,25 @@ static void gicv3_mask_irq(struct irq_desc *irqd)
>>   static void gicv3_eoi_irq(struct irq_desc *irqd)
>>   {
>>       /* Lower the priority */
>> -    WRITE_SYSREG32(irqd->irq, ICC_EOIR1_EL1);
>> +    WRITE_SYSREG(irqd->irq, ICC_EOIR1_EL1);
>>       isb();
>>   }
>>     static void gicv3_dir_irq(struct irq_desc *irqd)
>>   {
>>       /* Deactivate */
>> -    WRITE_SYSREG32(irqd->irq, ICC_DIR_EL1);
>> +    WRITE_SYSREG(irqd->irq, ICC_DIR_EL1);
>>       isb();
>>   }
>>     static unsigned int gicv3_read_irq(void)
>>   {
>> -    unsigned int irq = READ_SYSREG32(ICC_IAR1_EL1);
>> +    register_t irq = READ_SYSREG(ICC_IAR1_EL1);
>>         dsb(sy);
>>   -    return irq;
>> +    /* Number of IRQs do not exceed 32bit. */
> 
> If we want to be pedantic, the IRQs are encoded using 23-bit. So maybe we want to mask them below.
> 
>> +    return (unsigned int)irq;
> 
> NIT: We tend to avoid explicit cast unless they are strictly necessary because they can be more harmful than implicit cast (the compiler may not cast every conversion). So I would drop it and just keep the comment.
> 
Ok. I will do:
return (irq & 0xffffff);
>>   }
>>     /*
>> @@ -857,16 +858,16 @@ static int gicv3_cpu_init(void)
>>       gicv3_enable_sre();
>>         /* No priority grouping */
>> -    WRITE_SYSREG32(0, ICC_BPR1_EL1);
>> +    WRITE_SYSREG(0, ICC_BPR1_EL1);
>>         /* Set priority mask register */
>> -    WRITE_SYSREG32(DEFAULT_PMR_VALUE, ICC_PMR_EL1);
>> +    WRITE_SYSREG(DEFAULT_PMR_VALUE, ICC_PMR_EL1);
>>         /* EOI drops priority, DIR deactivates the interrupt (mode 1) */
>> -    WRITE_SYSREG32(GICC_CTLR_EL1_EOImode_drop, ICC_CTLR_EL1);
>> +    WRITE_SYSREG(GICC_CTLR_EL1_EOImode_drop, ICC_CTLR_EL1);
>>         /* Enable Group1 interrupts */
>> -    WRITE_SYSREG32(1, ICC_IGRPEN1_EL1);
>> +    WRITE_SYSREG(1, ICC_IGRPEN1_EL1);
>>         /* Sync at once at the end of cpu interface configuration */
>>       isb();
>> @@ -876,15 +877,15 @@ static int gicv3_cpu_init(void)
>>     static void gicv3_cpu_disable(void)
>>   {
>> -    WRITE_SYSREG32(0, ICC_CTLR_EL1);
>> +    WRITE_SYSREG(0, ICC_CTLR_EL1);
>>       isb();
>>   }
>>     static void gicv3_hyp_init(void)
>>   {
>> -    uint32_t vtr;
>> +    register_t vtr;
>>   -    vtr = READ_SYSREG32(ICH_VTR_EL2);
>> +    vtr = READ_SYSREG(ICH_VTR_EL2);
>>       gicv3_info.nr_lrs  = (vtr & ICH_VTR_NRLRGS) + 1;
>>       gicv3.nr_priorities = ((vtr >> ICH_VTR_PRIBITS_SHIFT) &
>>                             ICH_VTR_PRIBITS_MASK) + 1;
>> @@ -892,8 +893,8 @@ static void gicv3_hyp_init(void)
>>       if ( !((gicv3.nr_priorities > 4) && (gicv3.nr_priorities < 8)) )
>>           panic("GICv3: Invalid number of priority bits\n");
>>   -    WRITE_SYSREG32(ICH_VMCR_EOI | ICH_VMCR_VENG1, ICH_VMCR_EL2);
>> -    WRITE_SYSREG32(GICH_HCR_EN, ICH_HCR_EL2);
>> +    WRITE_SYSREG(ICH_VMCR_EOI | ICH_VMCR_VENG1, ICH_VMCR_EL2);
>> +    WRITE_SYSREG(GICH_HCR_EN, ICH_HCR_EL2);
>>   }
>>     /* Set up the per-CPU parts of the GIC for a secondary CPU */
>> @@ -917,11 +918,11 @@ out:
>>     static void gicv3_hyp_disable(void)
>>   {
>> -    uint32_t hcr;
>> +    register_t hcr;
>>   -    hcr = READ_SYSREG32(ICH_HCR_EL2);
>> +    hcr = READ_SYSREG(ICH_HCR_EL2);
>>       hcr &= ~GICH_HCR_EN;
>> -    WRITE_SYSREG32(hcr, ICH_HCR_EL2);
>> +    WRITE_SYSREG(hcr, ICH_HCR_EL2);
>>       isb();
>>   }
>>   @@ -1140,39 +1141,42 @@ static void gicv3_write_lr(int lr_reg, const struct gic_lr *lr)
>>     static void gicv3_hcr_status(uint32_t flag, bool status)
>>   {
>> -    uint32_t hcr;
>> +    register_t hcr;
>>   -    hcr = READ_SYSREG32(ICH_HCR_EL2);
>> +    hcr = READ_SYSREG(ICH_HCR_EL2);
>>       if ( status )
>> -        WRITE_SYSREG32(hcr | flag, ICH_HCR_EL2);
>> +        WRITE_SYSREG(hcr | flag, ICH_HCR_EL2);
>>       else
>> -        WRITE_SYSREG32(hcr & (~flag), ICH_HCR_EL2);
>> +        WRITE_SYSREG(hcr & (~flag), ICH_HCR_EL2);
>>       isb();
>>   }
>>     static unsigned int gicv3_read_vmcr_priority(void)
>>   {
>> -   return ((READ_SYSREG32(ICH_VMCR_EL2) >> ICH_VMCR_PRIORITY_SHIFT) &
>> +   return ((READ_SYSREG(ICH_VMCR_EL2) >> ICH_VMCR_PRIORITY_SHIFT) &
>>               ICH_VMCR_PRIORITY_MASK);
>>   }
>>     /* Only support reading GRP1 APRn registers */
>>   static unsigned int gicv3_read_apr(int apr_reg)
>>   {
>> +    register_t apr;
> 
> NIT: Please add a newline after the declaration. This will be easier to read.
> 
Ok.
>>       switch ( apr_reg )
>>       {
>>       case 0:
>>           ASSERT(gicv3.nr_priorities > 4 && gicv3.nr_priorities < 8);
>> -        return READ_SYSREG32(ICH_AP1R0_EL2);
>> +        apr = READ_SYSREG(ICH_AP1R0_EL2);
>>       case 1:
>>           ASSERT(gicv3.nr_priorities > 5 && gicv3.nr_priorities < 8);
>> -        return READ_SYSREG32(ICH_AP1R1_EL2);
>> +        apr = READ_SYSREG(ICH_AP1R1_EL2);
>>       case 2:
>>           ASSERT(gicv3.nr_priorities > 6 && gicv3.nr_priorities < 8);
>> -        return READ_SYSREG32(ICH_AP1R2_EL2);
>> +        apr = READ_SYSREG(ICH_AP1R2_EL2);
>>       default:
>>           BUG();
>>       }
> 
> NIT: Please add a newline here. This will be easier to read.
> 
Ok.
>> +    /* Number of priority levels do not exceed 32bit */
>> +    return (unsigned int)apr;
> 
> NIT: Same remark as before for the cast.
> 
Ok. I will do just:
return apr;
>>   }
>>     static bool gicv3_read_pending_state(struct irq_desc *irqd)
>> diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h
>> index ad0f7452d0..d750d070b4 100644
>> --- a/xen/include/asm-arm/gic.h
>> +++ b/xen/include/asm-arm/gic.h
>> @@ -171,9 +171,9 @@
>>    * GICv3 registers that needs to be saved/restored
>>    */
>>   struct gic_v3 {
>> -    uint32_t hcr, vmcr, sre_el1;
>> -    uint32_t apr0[4];
>> -    uint32_t apr1[4];
>> +    register_t hcr, vmcr, sre_el1;
>> +    register_t apr0[4];
>> +    register_t apr1[4];
>>       uint64_t lr[16];
>>   };
>>   #endif
>>
> 
> Cheers,
> 

Cheers


  reply	other threads:[~2021-04-21  7:49 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-20  7:08 [PATCH 0/9] xen/arm64: Get rid of READ/WRITE_SYSREG32 Michal Orzel
2021-04-20  7:08 ` [PATCH 1/9] arm64/vfp: " Michal Orzel
2021-04-20 13:04   ` Julien Grall
2021-04-20  7:08 ` [PATCH 2/9] arm/domain: " Michal Orzel
2021-04-20 13:12   ` Julien Grall
2021-04-21  7:36     ` Michal Orzel
2021-04-21 10:20       ` Julien Grall
2021-04-20  7:08 ` [PATCH 3/9] arm/gic: " Michal Orzel
2021-04-20 13:28   ` Julien Grall
2021-04-21  7:48     ` Michal Orzel [this message]
2021-04-21 10:21       ` Julien Grall
2021-04-20  7:08 ` [PATCH 4/9] arm/p2m: " Michal Orzel
2021-04-20 13:31   ` Julien Grall
2021-04-20  7:08 ` [PATCH 5/9] arm/mm: " Michal Orzel
2021-04-20 13:37   ` Julien Grall
2021-04-22 11:47     ` Michal Orzel
2021-04-22 13:40       ` Julien Grall
2021-04-20  7:08 ` [PATCH 6/9] arm/page: " Michal Orzel
2021-04-21 15:11   ` Julien Grall
2021-04-20  7:08 ` [PATCH 7/9] arm/time,vtimer: " Michal Orzel
2021-04-21 16:01   ` Julien Grall
2021-04-20  7:08 ` [PATCH 8/9] arm: Change type of hsr to register_t Michal Orzel
2021-04-21 19:02   ` Julien Grall
2021-04-20  7:08 ` [PATCH 9/9] xen/arm64: Remove READ/WRITE_SYSREG32 helper macros Michal Orzel
2021-04-21 19:16   ` Julien Grall
2021-04-27  7:16     ` Michal Orzel
2021-04-27  8:30       ` Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fd5924c5-685d-a9fc-1116-c1b8909c9aea@arm.com \
    --to=michal.orzel@arm.com \
    --cc=Volodymyr_Babchuk@epam.com \
    --cc=bertrand.marquis@arm.com \
    --cc=julien@xen.org \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).