More background information in case it matters.<br /><br />I did my original setup with:<br /><span style="font-family: monospace;"><span style="color: #000000; background-color: #ffffff;">EULA=1 </span><span style="font-weight: bold; color: #ff5454; background-color: #ffffff;">MACHINE</span><span style="color: #000000; background-color: #ffffff;">=imx8mmevk DISTRO=poky source setup-environment build<br /><br />... because I don't want/need graphics etc.<br /><br />After Otavio did his change, I smoked sstate and tmp dir and rebuilt core-image-base.&nbsp; Still get sdma errors and do not have /lib/firmware/imx</span></span><span style="font-family: monospace;">/ binaries.<br /><br /></span><span style="font-family: monospace;"><span style="color: #000000; background-color: #ffffff;">Starting kernel ... </span><br /><br />[ &nbsp;&nbsp;&nbsp;0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] <br />[ &nbsp;&nbsp;&nbsp;0.000000] Linux version 5.4.69+gdd0d7d132f10 (oe-user@oe-host) (gcc version 9.3.0 (GCC)) #1 SMP PREEMPT Sat Oct 3 16:05:58 UTC 2020 <br />[ &nbsp;&nbsp;&nbsp;0.000000] Machine model: FSL i.MX8MM LPDDR4 EVK RevB board <br />[ &nbsp;&nbsp;&nbsp;0.000000] efi: Getting EFI parameters from FDT: <br />[ &nbsp;&nbsp;&nbsp;0.000000] efi: UEFI not found. <br />[ &nbsp;&nbsp;&nbsp;0.000000] Reserved memory: created CMA memory pool at 0x0000000078000000, size 640 MiB <br />[ &nbsp;&nbsp;&nbsp;0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool <br />[ &nbsp;&nbsp;&nbsp;0.000000] NUMA: No NUMA configuration found <br />[ &nbsp;&nbsp;&nbsp;0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bdffffff] <br />[ &nbsp;&nbsp;&nbsp;0.000000] NUMA: NODE_DATA [mem 0xbdbdd500-0xbdbdefff] <br />[ &nbsp;&nbsp;&nbsp;0.000000] Zone ranges: <br />[ &nbsp;&nbsp;&nbsp;0.000000] &nbsp;&nbsp;DMA32 &nbsp;&nbsp;&nbsp;[mem 0x0000000040000000-0x00000000bdffffff] <br />[ &nbsp;&nbsp;&nbsp;0.000000] &nbsp;&nbsp;Normal &nbsp;&nbsp;empty <br />[ &nbsp;&nbsp;&nbsp;0.000000] Movable zone start for each node <br />[ &nbsp;&nbsp;&nbsp;0.000000] Early memory node ranges <br />[ &nbsp;&nbsp;&nbsp;0.000000] &nbsp;&nbsp;node &nbsp;&nbsp;0: [mem 0x0000000040000000-0x00000000b7ffffff] <br />[ &nbsp;&nbsp;&nbsp;0.000000] &nbsp;&nbsp;node &nbsp;&nbsp;0: [mem 0x00000000b8400000-0x00000000bdffffff] <br />[ &nbsp;&nbsp;&nbsp;0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bdffffff] <br />[ &nbsp;&nbsp;&nbsp;0.000000] psci: probing for conduit method from DT. <br />[ &nbsp;&nbsp;&nbsp;0.000000] psci: PSCIv1.1 detected in firmware. <br />[ &nbsp;&nbsp;&nbsp;0.000000] psci: Using standard PSCI v0.2 function IDs <br />[ &nbsp;&nbsp;&nbsp;0.000000] psci: Trusted OS migration not required <br />[ &nbsp;&nbsp;&nbsp;0.000000] psci: SMC Calling Convention v1.1 <br />[ &nbsp;&nbsp;&nbsp;0.000000] percpu: Embedded 24 pages/cpu s58904 r8192 d31208 u98304 <br />[ &nbsp;&nbsp;&nbsp;0.000000] Detected VIPT I-cache on CPU0 <br />[ &nbsp;&nbsp;&nbsp;0.000000] CPU features: detected: ARM erratum 845719 <br />[ &nbsp;&nbsp;&nbsp;0.000000] CPU features: detected: GIC system register CPU interface <br />[ &nbsp;&nbsp;&nbsp;0.000000] Speculative Store Bypass Disable mitigation not required <br />[ &nbsp;&nbsp;&nbsp;0.000000] Built 1 zonelists, mobility grouping on. &nbsp;Total pages: 507008 <br />[ &nbsp;&nbsp;&nbsp;0.000000] Policy zone: DMA32 <br />[ &nbsp;&nbsp;&nbsp;0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk1p2 rootwait rw <br />[ &nbsp;&nbsp;&nbsp;0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) <br />[ &nbsp;&nbsp;&nbsp;0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) <br />[ &nbsp;&nbsp;&nbsp;0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <br />[ &nbsp;&nbsp;&nbsp;0.000000] Memory: 1336512K/2060288K available (16316K kernel code, 1206K rwdata, 6432K rodata, 2816K init, 1012K bss, 68416K reserved, 655360K cma-reserved) <br />[ &nbsp;&nbsp;&nbsp;0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <br />[ &nbsp;&nbsp;&nbsp;0.000000] rcu: Preemptible hierarchical RCU implementation. <br />[ &nbsp;&nbsp;&nbsp;0.000000] rcu: &nbsp;&nbsp;&nbsp;&nbsp;RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. <br />[ &nbsp;&nbsp;&nbsp;0.000000] &nbsp;Tasks RCU enabled. <br />[ &nbsp;&nbsp;&nbsp;0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. <br />[ &nbsp;&nbsp;&nbsp;0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <br />[ &nbsp;&nbsp;&nbsp;0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <br />[ &nbsp;&nbsp;&nbsp;0.000000] GICv3: GIC: Using split EOI/Deactivate mode <br />[ &nbsp;&nbsp;&nbsp;0.000000] GICv3: 128 SPIs implemented <br />[ &nbsp;&nbsp;&nbsp;0.000000] GICv3: 0 Extended SPIs implemented <br />[ &nbsp;&nbsp;&nbsp;0.000000] GICv3: Distributor has no Range Selector support <br />[ &nbsp;&nbsp;&nbsp;0.000000] GICv3: 16 PPIs implemented <br />[ &nbsp;&nbsp;&nbsp;0.000000] GICv3: no VLPI support, no direct LPI support <br />[ &nbsp;&nbsp;&nbsp;0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000 <br />[ &nbsp;&nbsp;&nbsp;0.000000] ITS: No ITS available, not enabling LPIs <br />[ &nbsp;&nbsp;&nbsp;0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0 <br />[ &nbsp;&nbsp;&nbsp;0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). <br />[ &nbsp;&nbsp;&nbsp;0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns <br />[ &nbsp;&nbsp;&nbsp;0.000003] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns <br />[ &nbsp;&nbsp;&nbsp;0.000368] Console: colour dummy device 80x25 <br />[ &nbsp;&nbsp;&nbsp;0.000433] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000) <br />[ &nbsp;&nbsp;&nbsp;0.000442] pid_max: default: 32768 minimum: 301 <br />[ &nbsp;&nbsp;&nbsp;0.000509] LSM: Security Framework initializing <br />[ &nbsp;&nbsp;&nbsp;0.000561] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) <br />[ &nbsp;&nbsp;&nbsp;0.000572] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) <br />[ &nbsp;&nbsp;&nbsp;0.001725] ASID allocator initialised with 32768 entries <br />[ &nbsp;&nbsp;&nbsp;0.001795] rcu: Hierarchical SRCU implementation. <br />[ &nbsp;&nbsp;&nbsp;0.002674] EFI services will not be available. <br />[ &nbsp;&nbsp;&nbsp;0.002831] smp: Bringing up secondary CPUs ... <br />[ &nbsp;&nbsp;&nbsp;0.003207] Detected VIPT I-cache on CPU1 <br />[ &nbsp;&nbsp;&nbsp;0.003231] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000 <br />[ &nbsp;&nbsp;&nbsp;0.003264] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] <br />[ &nbsp;&nbsp;&nbsp;0.003671] Detected VIPT I-cache on CPU2 <br />[ &nbsp;&nbsp;&nbsp;0.003687] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000 <br />[ &nbsp;&nbsp;&nbsp;0.003705] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] <br />[ &nbsp;&nbsp;&nbsp;0.004125] Detected VIPT I-cache on CPU3 <br />[ &nbsp;&nbsp;&nbsp;0.004140] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000 <br />[ &nbsp;&nbsp;&nbsp;0.004156] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] <br />[ &nbsp;&nbsp;&nbsp;0.004214] smp: Brought up 1 node, 4 CPUs <br />[ &nbsp;&nbsp;&nbsp;0.004223] SMP: Total of 4 processors activated. <br />[ &nbsp;&nbsp;&nbsp;0.004228] CPU features: detected: 32-bit EL0 Support <br />[ &nbsp;&nbsp;&nbsp;0.004235] CPU features: detected: CRC32 instructions <br />[ &nbsp;&nbsp;&nbsp;0.010798] CPU: All CPU(s) started at EL2 <br />[ &nbsp;&nbsp;&nbsp;0.010819] alternatives: patching kernel code <br />[ &nbsp;&nbsp;&nbsp;0.012249] devtmpfs: initialized <br />[ &nbsp;&nbsp;&nbsp;0.018305] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns <br />[ &nbsp;&nbsp;&nbsp;0.018322] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <br />[ &nbsp;&nbsp;&nbsp;0.034567] pinctrl core: initialized pinctrl subsystem <br />[ &nbsp;&nbsp;&nbsp;0.035263] DMI not present or invalid. <br />[ &nbsp;&nbsp;&nbsp;0.035517] NET: Registered protocol family 16 <br />[ &nbsp;&nbsp;&nbsp;0.042286] DMA: preallocated 256 KiB pool for atomic allocations <br />[ &nbsp;&nbsp;&nbsp;0.042316] audit: initializing netlink subsys (disabled) <br />[ &nbsp;&nbsp;&nbsp;0.042552] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 <br />[ &nbsp;&nbsp;&nbsp;0.043412] cpuidle: using governor menu <br />[ &nbsp;&nbsp;&nbsp;0.043815] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <br />[ &nbsp;&nbsp;&nbsp;0.044603] Serial: AMBA PL011 UART driver <br />[ &nbsp;&nbsp;&nbsp;0.044661] imx mu driver is registered. <br />[ &nbsp;&nbsp;&nbsp;0.044680] imx rpmsg driver is registered. <br />[ &nbsp;&nbsp;&nbsp;0.050379] imx8mm-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver <br />[ &nbsp;&nbsp;&nbsp;0.070353] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages <br />[ &nbsp;&nbsp;&nbsp;0.070364] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages <br />[ &nbsp;&nbsp;&nbsp;0.070369] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages <br />[ &nbsp;&nbsp;&nbsp;0.070374] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages <br />[ &nbsp;&nbsp;&nbsp;0.071199] cryptd: max_cpu_qlen set to 1000 <br />[ &nbsp;&nbsp;&nbsp;0.074285] ACPI: Interpreter disabled. <br />[ &nbsp;&nbsp;&nbsp;0.075173] iommu: Default domain type: Translated &nbsp;<br />[ &nbsp;&nbsp;&nbsp;0.075315] vgaarb: loaded <br />[ &nbsp;&nbsp;&nbsp;0.075598] SCSI subsystem initialized <br />[ &nbsp;&nbsp;&nbsp;0.075917] usbcore: registered new interface driver usbfs <br />[ &nbsp;&nbsp;&nbsp;0.075954] usbcore: registered new interface driver hub <br />[ &nbsp;&nbsp;&nbsp;0.076005] usbcore: registered new device driver usb <br />[ &nbsp;&nbsp;&nbsp;0.077181] mc: Linux media interface: v0.10 <br />[ &nbsp;&nbsp;&nbsp;0.077209] videodev: Linux video capture interface: v2.00 <br />[ &nbsp;&nbsp;&nbsp;0.077270] pps_core: LinuxPPS API ver. 1 registered <br />[ &nbsp;&nbsp;&nbsp;0.077277] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti &lt;giometti@linux.it&gt; <br />[ &nbsp;&nbsp;&nbsp;0.077296] PTP clock support registered <br />[ &nbsp;&nbsp;&nbsp;0.077432] EDAC MC: Ver: 3.0.0 <br />[ &nbsp;&nbsp;&nbsp;0.078162] No BMan portals available! <br />[ &nbsp;&nbsp;&nbsp;0.078367] QMan: Allocated lookup table at (____ptrval____), entry count 65537 <br />[ &nbsp;&nbsp;&nbsp;0.078615] No QMan portals available! <br />[ &nbsp;&nbsp;&nbsp;0.078979] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree <br />[ &nbsp;&nbsp;&nbsp;0.079371] FPGA manager framework <br />[ &nbsp;&nbsp;&nbsp;0.079452] Advanced Linux Sound Architecture Driver Initialized. <br />[ &nbsp;&nbsp;&nbsp;0.079850] Bluetooth: Core ver 2.22 <br />[ &nbsp;&nbsp;&nbsp;0.079879] NET: Registered protocol family 31 <br />[ &nbsp;&nbsp;&nbsp;0.079885] Bluetooth: HCI device and connection manager initialized <br />[ &nbsp;&nbsp;&nbsp;0.079893] Bluetooth: HCI socket layer initialized <br />[ &nbsp;&nbsp;&nbsp;0.079900] Bluetooth: L2CAP socket layer initialized <br />[ &nbsp;&nbsp;&nbsp;0.079912] Bluetooth: SCO socket layer initialized <br />[ &nbsp;&nbsp;&nbsp;0.080626] clocksource: Switched to clocksource arch_sys_counter <br />[ &nbsp;&nbsp;&nbsp;0.080789] VFS: Disk quotas dquot_6.6.0 <br />[ &nbsp;&nbsp;&nbsp;0.080835] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <br />[ &nbsp;&nbsp;&nbsp;0.080988] pnp: PnP ACPI: disabled <br />[ &nbsp;&nbsp;&nbsp;0.086347] thermal_sys: Registered thermal governor 'step_wise' <br />[ &nbsp;&nbsp;&nbsp;0.086351] thermal_sys: Registered thermal governor 'power_allocator' <br />[ &nbsp;&nbsp;&nbsp;0.086676] NET: Registered protocol family 2 <br />[ &nbsp;&nbsp;&nbsp;0.087007] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) <br />[ &nbsp;&nbsp;&nbsp;0.087037] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) <br />[ &nbsp;&nbsp;&nbsp;0.087146] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) <br />[ &nbsp;&nbsp;&nbsp;0.087372] TCP: Hash tables configured (established 16384 bind 16384) <br />[ &nbsp;&nbsp;&nbsp;0.087449] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) <br />[ &nbsp;&nbsp;&nbsp;0.087490] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) <br />[ &nbsp;&nbsp;&nbsp;0.087623] NET: Registered protocol family 1 <br />[ &nbsp;&nbsp;&nbsp;0.087946] RPC: Registered named UNIX socket transport module. <br />[ &nbsp;&nbsp;&nbsp;0.087951] RPC: Registered udp transport module. <br />[ &nbsp;&nbsp;&nbsp;0.087955] RPC: Registered tcp transport module. <br />[ &nbsp;&nbsp;&nbsp;0.087958] RPC: Registered tcp NFSv4.1 backchannel transport module. <br />[ &nbsp;&nbsp;&nbsp;0.088337] PCI: CLS 0 bytes, default 64 <br />[ &nbsp;&nbsp;&nbsp;0.088994] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available <br />[ &nbsp;&nbsp;&nbsp;0.089358] kvm [1]: IPA Size Limit: 40bits <br />[ &nbsp;&nbsp;&nbsp;0.089954] kvm [1]: GICv3: no GICV resource entry <br />[ &nbsp;&nbsp;&nbsp;0.089959] kvm [1]: disabling GICv2 emulation <br />[ &nbsp;&nbsp;&nbsp;0.089976] kvm [1]: GIC system register CPU interface enabled <br />[ &nbsp;&nbsp;&nbsp;0.090032] kvm [1]: vgic interrupt IRQ1 <br />[ &nbsp;&nbsp;&nbsp;0.090122] kvm [1]: Hyp mode initialized successfully <br />[ &nbsp;&nbsp;&nbsp;0.092902] Initialise system trusted keyrings <br />[ &nbsp;&nbsp;&nbsp;0.093042] workingset: timestamp_bits=44 max_order=19 bucket_order=0 <br />[ &nbsp;&nbsp;&nbsp;0.098758] squashfs: version 4.0 (2009/01/31) Phillip Lougher <br />[ &nbsp;&nbsp;&nbsp;0.099374] NFS: Registering the id_resolver key type <br />[ &nbsp;&nbsp;&nbsp;0.099397] Key type id_resolver registered <br />[ &nbsp;&nbsp;&nbsp;0.099401] Key type id_legacy registered <br />[ &nbsp;&nbsp;&nbsp;0.099411] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <br />[ &nbsp;&nbsp;&nbsp;0.099430] jffs2: version 2.2. (NAND) �&copy; 2001-2006 Red Hat, Inc. <br />[ &nbsp;&nbsp;&nbsp;0.099769] 9p: Installing v9fs 9p2000 file system support <br />[ &nbsp;&nbsp;&nbsp;0.112940] Key type asymmetric registered <br />[ &nbsp;&nbsp;&nbsp;0.112947] Asymmetric key parser 'x509' registered <br />[ &nbsp;&nbsp;&nbsp;0.112979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) <br />[ &nbsp;&nbsp;&nbsp;0.112985] io scheduler mq-deadline registered <br />[ &nbsp;&nbsp;&nbsp;0.112990] io scheduler kyber registered <br />[ &nbsp;&nbsp;&nbsp;0.117751] EINJ: ACPI disabled. <br />[ &nbsp;&nbsp;&nbsp;0.126468] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 <br />[ &nbsp;&nbsp;&nbsp;0.126481] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin <br />[ &nbsp;&nbsp;&nbsp;0.134362] mxs-dma 33000000.dma-controller: initialized <br />[ &nbsp;&nbsp;&nbsp;0.135472] Bus freq driver module loaded <br />[ &nbsp;&nbsp;&nbsp;0.140617] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <br />[ &nbsp;&nbsp;&nbsp;0.142776] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 39, base_baud = 5000000) is a IMX <br />[ &nbsp;&nbsp;&nbsp;0.143243] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 40, base_baud = 5000000) is a IMX <br />[ &nbsp;&nbsp;&nbsp;0.143605] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 41, base_baud = 1500000) is a IMX <br />[ &nbsp;&nbsp;&nbsp;1.128381] printk: console [ttymxc1] enabled <br />[ &nbsp;&nbsp;&nbsp;1.138932] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <br />[ &nbsp;&nbsp;&nbsp;1.145570] [drm] No driver support for vblank timestamp query. <br />[ &nbsp;&nbsp;&nbsp;1.151568] imx-drm soc@0:bus@32c00000:display-subsystem: bound imx-lcdif-crtc.0 (ops lcdif_crtc_ops) <br />[ &nbsp;&nbsp;&nbsp;1.161489] imx_sec_dsim_drv 32e10000.mipi_dsi: version number is 0x1060200 <br />[ &nbsp;&nbsp;&nbsp;1.169037] imx_sec_dsim_drv 32e10000.mipi_dsi: Failed to attach bridge: 32e10000.mipi_dsi <br />[ &nbsp;&nbsp;&nbsp;1.177314] imx_sec_dsim_drv 32e10000.mipi_dsi: failed to bind sec dsim bridge: -517 <br />[ &nbsp;&nbsp;&nbsp;1.194256] loop: module loaded <br />[ &nbsp;&nbsp;&nbsp;1.199500] imx ahci driver is registered. <br />[ &nbsp;&nbsp;&nbsp;1.206634] spi-nor spi3.0: n25q256ax1 (32768 Kbytes) <br />[ &nbsp;&nbsp;&nbsp;1.218432] libphy: Fixed MDIO Bus: probed <br />[ &nbsp;&nbsp;&nbsp;1.223294] tun: Universal TUN/TAP device driver, 1.6 <br />[ &nbsp;&nbsp;&nbsp;1.229100] thunder_xcv, ver 1.0 <br />[ &nbsp;&nbsp;&nbsp;1.232361] thunder_bgx, ver 1.0 <br />[ &nbsp;&nbsp;&nbsp;1.235627] nicpf, ver 1.0 <br />[ &nbsp;&nbsp;&nbsp;1.239161] pps pps0: new PPS source ptp0 <br />[ &nbsp;&nbsp;&nbsp;1.248463] libphy: fec_enet_mii_bus: probed <br />[ &nbsp;&nbsp;&nbsp;1.253886] fec 30be0000.ethernet eth0: registered PHC device 0 <br />[ &nbsp;&nbsp;&nbsp;1.260422] Freescale FM module, FMD API version 21.1.0 <br />[ &nbsp;&nbsp;&nbsp;1.265896] Freescale FM Ports module <br />[ &nbsp;&nbsp;&nbsp;1.269568] fsl_mac: fsl_mac: FSL FMan MAC API based driver <br />[ &nbsp;&nbsp;&nbsp;1.275292] fsl_dpa: FSL DPAA Ethernet driver <br />[ &nbsp;&nbsp;&nbsp;1.279787] fsl_advanced: FSL DPAA Advanced drivers: <br />[ &nbsp;&nbsp;&nbsp;1.284763] fsl_proxy: FSL DPAA Proxy initialization driver <br />[ &nbsp;&nbsp;&nbsp;1.290455] fsl_oh: FSL FMan Offline Parsing port driver <br />[ &nbsp;&nbsp;&nbsp;1.296651] hclge is initializing <br />[ &nbsp;&nbsp;&nbsp;1.299968] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version <br />[ &nbsp;&nbsp;&nbsp;1.307197] hns3: Copyright (c) 2017 Huawei Corporation. <br />[ &nbsp;&nbsp;&nbsp;1.312557] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI <br />[ &nbsp;&nbsp;&nbsp;1.319613] e1000: Copyright (c) 1999-2006 Intel Corporation. <br />[ &nbsp;&nbsp;&nbsp;1.325394] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k <br />[ &nbsp;&nbsp;&nbsp;1.331232] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <br />[ &nbsp;&nbsp;&nbsp;1.337190] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k <br />[ &nbsp;&nbsp;&nbsp;1.344157] igb: Copyright (c) 2007-2014 Intel Corporation. <br />[ &nbsp;&nbsp;&nbsp;1.349774] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k <br />[ &nbsp;&nbsp;&nbsp;1.357608] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <br />[ &nbsp;&nbsp;&nbsp;1.363684] sky2: driver version 1.30 <br />[ &nbsp;&nbsp;&nbsp;1.368253] VFIO - User Level meta-driver version: 0.3 <br />[ &nbsp;&nbsp;&nbsp;1.375216] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <br />[ &nbsp;&nbsp;&nbsp;1.381762] ehci-pci: EHCI PCI platform driver <br />[ &nbsp;&nbsp;&nbsp;1.386284] ehci-platform: EHCI generic platform driver <br />[ &nbsp;&nbsp;&nbsp;1.391705] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <br />[ &nbsp;&nbsp;&nbsp;1.397908] ohci-pci: OHCI PCI platform driver <br />[ &nbsp;&nbsp;&nbsp;1.402387] ohci-platform: OHCI generic platform driver <br />[ &nbsp;&nbsp;&nbsp;1.408194] usbcore: registered new interface driver usb-storage <br />[ &nbsp;&nbsp;&nbsp;1.414276] usbcore: registered new interface driver usbserial_generic <br />[ &nbsp;&nbsp;&nbsp;1.420823] usbserial: USB Serial support registered for generic <br />[ &nbsp;&nbsp;&nbsp;1.426865] usbcore: registered new interface driver ftdi_sio <br />[ &nbsp;&nbsp;&nbsp;1.432649] usbserial: USB Serial support registered for FTDI USB Serial Device <br />[ &nbsp;&nbsp;&nbsp;1.439989] usbcore: registered new interface driver usb_serial_simple <br />[ &nbsp;&nbsp;&nbsp;1.446534] usbserial: USB Serial support registered for carelink <br />[ &nbsp;&nbsp;&nbsp;1.452651] usbserial: USB Serial support registered for zio <br />[ &nbsp;&nbsp;&nbsp;1.458331] usbserial: USB Serial support registered for funsoft <br />[ &nbsp;&nbsp;&nbsp;1.464358] usbserial: USB Serial support registered for flashloader <br />[ &nbsp;&nbsp;&nbsp;1.470730] usbserial: USB Serial support registered for google <br />[ &nbsp;&nbsp;&nbsp;1.476672] usbserial: USB Serial support registered for libtransistor <br />[ &nbsp;&nbsp;&nbsp;1.483220] usbserial: USB Serial support registered for vivopay <br />[ &nbsp;&nbsp;&nbsp;1.489247] usbserial: USB Serial support registered for moto_modem <br />[ &nbsp;&nbsp;&nbsp;1.495533] usbserial: USB Serial support registered for motorola_tetra <br />[ &nbsp;&nbsp;&nbsp;1.502167] usbserial: USB Serial support registered for novatel_gps <br />[ &nbsp;&nbsp;&nbsp;1.508543] usbserial: USB Serial support registered for hp4x <br />[ &nbsp;&nbsp;&nbsp;1.514315] usbserial: USB Serial support registered for suunto <br />[ &nbsp;&nbsp;&nbsp;1.520254] usbserial: USB Serial support registered for siemens_mpi <br />[ &nbsp;&nbsp;&nbsp;1.528117] imx_usb 32e40000.usb: No over current polarity defined <br />[ &nbsp;&nbsp;&nbsp;1.535658] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc@0/soc@0:bus@30000000/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0 <br />[ &nbsp;&nbsp;&nbsp;1.550767] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0 <br />[ &nbsp;&nbsp;&nbsp;1.557054] i2c /dev entries driver <br />[ &nbsp;&nbsp;&nbsp;1.561214] mx6s-csi 32e20000.csi1_bridge: initialising <br />[ &nbsp;&nbsp;&nbsp;1.566961] mxc_mipi-csi 32e30000.mipi_csi: 32e30000.mipi_csi supply mipi-phy not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;1.577149] mxc_mipi-csi 32e30000.mipi_csi: mipi csi v4l2 device registered <br />[ &nbsp;&nbsp;&nbsp;1.584124] CSI: Registered sensor subdevice: mxc_mipi-csi.0 <br />[ &nbsp;&nbsp;&nbsp;1.589804] mxc_mipi-csi 32e30000.mipi_csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 333000000 <br />[ &nbsp;&nbsp;&nbsp;1.603800] imx2-wdt 30280000.watchdog: timeout 60 sec (nowayout=0) <br />[ &nbsp;&nbsp;&nbsp;1.610393] Bluetooth: HCI UART driver ver 2.3 <br />[ &nbsp;&nbsp;&nbsp;1.614849] Bluetooth: HCI UART protocol H4 registered <br />[ &nbsp;&nbsp;&nbsp;1.619998] Bluetooth: HCI UART protocol BCSP registered <br />[ &nbsp;&nbsp;&nbsp;1.625336] Bluetooth: HCI UART protocol LL registered <br />[ &nbsp;&nbsp;&nbsp;1.630482] Bluetooth: HCI UART protocol ATH3K registered <br />[ &nbsp;&nbsp;&nbsp;1.635904] Bluetooth: HCI UART protocol Three-wire (H5) registered <br />[ &nbsp;&nbsp;&nbsp;1.642264] Bluetooth: HCI UART protocol Broadcom registered <br />[ &nbsp;&nbsp;&nbsp;1.647959] Bluetooth: HCI UART protocol QCA registered <br />[ &nbsp;&nbsp;&nbsp;1.655070] sdhci: Secure Digital Host Controller Interface driver <br />[ &nbsp;&nbsp;&nbsp;1.661270] sdhci: Copyright(c) Pierre Ossman <br />[ &nbsp;&nbsp;&nbsp;1.665827] Synopsys Designware Multimedia Card Interface Driver <br />[ &nbsp;&nbsp;&nbsp;1.672394] sdhci-pltfm: SDHCI platform and OF driver helper <br />[ &nbsp;&nbsp;&nbsp;1.678834] mmc0: CQHCI version 5.10 <br />[ &nbsp;&nbsp;&nbsp;1.682839] mmc1: CQHCI version 5.10 <br />[ &nbsp;&nbsp;&nbsp;1.686888] mmc2: CQHCI version 5.10 <br />[ &nbsp;&nbsp;&nbsp;1.722293] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA <br />[ &nbsp;&nbsp;&nbsp;1.732199] ledtrig-cpu: registered to indicate activity on CPUs <br />[ &nbsp;&nbsp;&nbsp;1.739408] caam 30900000.crypto: device ID = 0x0a16040100000000 (Era 9) <br />[ &nbsp;&nbsp;&nbsp;1.746179] caam 30900000.crypto: job rings = 2, qi = 0 <br />[ &nbsp;&nbsp;&nbsp;1.761269] caam algorithms registered in /proc/crypto <br />[ &nbsp;&nbsp;&nbsp;1.767138] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto <br />[ &nbsp;&nbsp;&nbsp;1.776667] caam_jr 30901000.jr: registering rng-caam <br />[ &nbsp;&nbsp;&nbsp;1.785369] caam-snvs 30370000.caam-snvs: can't get snvs clock <br />[ &nbsp;&nbsp;&nbsp;1.791259] caam-snvs 30370000.caam-snvs: violation handlers armed - non-secure state <br />[ &nbsp;&nbsp;&nbsp;1.799724] usbcore: registered new interface driver usbhid <br />[ &nbsp;&nbsp;&nbsp;1.805325] usbhid: USB HID core driver <br />[ &nbsp;&nbsp;&nbsp;1.811586] No fsl,qman node <br />[ &nbsp;&nbsp;&nbsp;1.814491] Freescale USDPAA process driver <br />[ &nbsp;&nbsp;&nbsp;1.818681] fsl-usdpaa: no region found <br />[ &nbsp;&nbsp;&nbsp;1.822541] Freescale USDPAA process IRQ driver <br />[ &nbsp;&nbsp;&nbsp;1.830895] optee: probing for conduit method from DT. <br />[ &nbsp;&nbsp;&nbsp;1.836068] optee: revision 3.7 (7a49776d) <br />[ &nbsp;&nbsp;&nbsp;1.837489] optee: dynamic shared memory is enabled <br />[ &nbsp;&nbsp;&nbsp;1.846654] optee: initialized driver <br />[ &nbsp;&nbsp;&nbsp;1.851776] hantrodec 0 : module inserted. Major = 236 <br />[ &nbsp;&nbsp;&nbsp;1.857470] hantrodec 1 : module inserted. Major = 236 <br />[ &nbsp;&nbsp;&nbsp;1.863548] hx280enc: module inserted. Major &lt;235&gt; <br />[ &nbsp;&nbsp;&nbsp;1.864030] mmc2: Command Queue Engine enabled <br />[ &nbsp;&nbsp;&nbsp;1.872286] wm8524-codec audio-codec: Failed to get mute line: -517 <br />[ &nbsp;&nbsp;&nbsp;1.872849] mmc2: new HS400 Enhanced strobe MMC card at address 0001 <br />[ &nbsp;&nbsp;&nbsp;1.886243] mmcblk2: mmc2:0001 DG4016 14.7 GiB &nbsp;<br />[ &nbsp;&nbsp;&nbsp;1.890953] mmcblk2boot0: mmc2:0001 DG4016 partition 1 4.00 MiB <br />[ &nbsp;&nbsp;&nbsp;1.897036] mmcblk2boot1: mmc2:0001 DG4016 partition 2 4.00 MiB <br />[ &nbsp;&nbsp;&nbsp;1.903411] mmcblk2rpmb: mmc2:0001 DG4016 partition 3 4.00 MiB, chardev (237:0) <br />[ &nbsp;&nbsp;&nbsp;1.913593] &nbsp;mmcblk2: p1 <br />[ &nbsp;&nbsp;&nbsp;1.921448] fsl-micfil-dai 30080000.micfil: GET IRQ: 16 <br />[ &nbsp;&nbsp;&nbsp;1.926699] fsl-micfil-dai 30080000.micfil: GET IRQ: 17 <br />[ &nbsp;&nbsp;&nbsp;1.931944] fsl-micfil-dai 30080000.micfil: GET IRQ: 18 <br />[ &nbsp;&nbsp;&nbsp;1.937188] fsl-micfil-dai 30080000.micfil: GET IRQ: 19 <br />[ &nbsp;&nbsp;&nbsp;1.948366] imx-spdif sound-spdif: snd-soc-dummy-dai &lt;-&gt; 30090000.spdif mapping ok <br />[ &nbsp;&nbsp;&nbsp;1.955987] imx-spdif sound-spdif: ASoC: no DMI vendor name! <br />[ &nbsp;&nbsp;&nbsp;1.964815] imx-ak4458 sound-ak4458: ASoC: failed to init link ak4458: -517 <br />[ &nbsp;&nbsp;&nbsp;1.971795] imx-ak4458 sound-ak4458: snd_soc_register_card failed (-517) <br />[ &nbsp;&nbsp;&nbsp;1.979181] debugfs: Directory '30080000.micfil' with parent 'imx-audio-micfil' already present! <br />[ &nbsp;&nbsp;&nbsp;1.988069] imx-micfil sound-micfil: snd-soc-dummy-dai &lt;-&gt; 30080000.micfil mapping ok <br />[ &nbsp;&nbsp;&nbsp;1.995911] imx-micfil sound-micfil: ASoC: no DMI vendor name! <br />[ &nbsp;&nbsp;&nbsp;2.003871] pktgen: Packet Generator for packet performance testing. Version: 2.75 <br />[ &nbsp;&nbsp;&nbsp;2.014244] NET: Registered protocol family 26 <br />[ &nbsp;&nbsp;&nbsp;2.019255] NET: Registered protocol family 10 <br />[ &nbsp;&nbsp;&nbsp;2.024697] Segment Routing with IPv6 <br />[ &nbsp;&nbsp;&nbsp;2.028405] NET: Registered protocol family 17 <br />[ &nbsp;&nbsp;&nbsp;2.033320] Bluetooth: RFCOMM TTY layer initialized <br />[ &nbsp;&nbsp;&nbsp;2.038227] Bluetooth: RFCOMM socket layer initialized <br />[ &nbsp;&nbsp;&nbsp;2.043399] Bluetooth: RFCOMM ver 1.11 <br />[ &nbsp;&nbsp;&nbsp;2.047158] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <br />[ &nbsp;&nbsp;&nbsp;2.052477] Bluetooth: BNEP filters: protocol multicast <br />[ &nbsp;&nbsp;&nbsp;2.057713] Bluetooth: BNEP socket layer initialized <br />[ &nbsp;&nbsp;&nbsp;2.062681] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 <br />[ &nbsp;&nbsp;&nbsp;2.068607] Bluetooth: HIDP socket layer initialized <br />[ &nbsp;&nbsp;&nbsp;2.073614] 8021q: 802.1Q VLAN Support v1.8 <br />[ &nbsp;&nbsp;&nbsp;2.077819] lib80211: common routines for IEEE802.11 drivers <br />[ &nbsp;&nbsp;&nbsp;2.083589] 9pnet: Installing 9P2000 support <br />[ &nbsp;&nbsp;&nbsp;2.087889] tsn generic netlink module v1 init... <br />[ &nbsp;&nbsp;&nbsp;2.092668] Key type dns_resolver registered <br />[ &nbsp;&nbsp;&nbsp;2.097910] registered taskstats version 1 <br />[ &nbsp;&nbsp;&nbsp;2.102018] Loading compiled-in X.509 certificates <br />[ &nbsp;&nbsp;&nbsp;2.127804] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.136638] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.165134] ldo6: supplied by regulator-dummy <br />[ &nbsp;&nbsp;&nbsp;2.170280] i2c i2c-0: IMX I2C adapter registered <br />[ &nbsp;&nbsp;&nbsp;2.176191] adv7511 1-003d: 1-003d supply avdd not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.183567] adv7511 1-003d: 1-003d supply dvdd not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.190925] adv7511 1-003d: 1-003d supply pvdd not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.198292] adv7511 1-003d: 1-003d supply a2vdd not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.205727] adv7511 1-003d: 1-003d supply v3p3 not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.213081] adv7511 1-003d: 1-003d supply v1p2 not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.221229] adv7511 1-003d: Probe failed. Remote port 'mipi_dsi@32e10000' disabled <br />[ &nbsp;&nbsp;&nbsp;2.230679] i2c i2c-1: IMX I2C adapter registered <br />[ &nbsp;&nbsp;&nbsp;2.236516] pca953x 2-0020: using no AI <br />[ &nbsp;&nbsp;&nbsp;2.242710] ak4458 2-0010: Failed to request supplies: -517 <br />[ &nbsp;&nbsp;&nbsp;2.248610] ak4458 2-0012: Failed to request supplies: -517 <br />[ &nbsp;&nbsp;&nbsp;2.254460] ak5558 2-0013: Failed to request supplies: -517 <br />[ &nbsp;&nbsp;&nbsp;2.260350] ak4458 2-0011: Failed to request supplies: -517 <br />[ &nbsp;&nbsp;&nbsp;2.266248] ov5640_mipi 2-003c: No sensor reset pin available <br />[ &nbsp;&nbsp;&nbsp;2.272036] ov5640_mipi 2-003c: 2-003c supply DOVDD not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.279841] ov5640_mipi 2-003c: 2-003c supply DVDD not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.287542] ov5640_mipi 2-003c: 2-003c supply AVDD not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.308964] ov5640_mipi 2-003c: Read reg error: reg=300a <br />[ &nbsp;&nbsp;&nbsp;2.314286] ov5640_mipi 2-003c: Camera is not found <br />[ &nbsp;&nbsp;&nbsp;2.319331] i2c i2c-2: IMX I2C adapter registered <br />[ &nbsp;&nbsp;&nbsp;2.325397] imx6q-pcie 33800000.pcie: couldn't get pcie-phy <br />[ &nbsp;&nbsp;&nbsp;2.326092] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <br />[ &nbsp;&nbsp;&nbsp;2.331085] imx6q-pcie 33800000.pcie: 33800000.pcie supply epdev_on not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.337610] [drm] No driver support for vblank timestamp query. <br />[ &nbsp;&nbsp;&nbsp;2.337683] imx-drm soc@0:bus@32c00000:display-subsystem: bound imx-lcdif-crtc.0 (ops lcdif_crtc_ops) <br />[ &nbsp;&nbsp;&nbsp;2.347002] imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges: <br />[ &nbsp;&nbsp;&nbsp;2.353343] imx_sec_dsim_drv 32e10000.mipi_dsi: version number is 0x1060200 <br />[ &nbsp;&nbsp;&nbsp;2.361917] imx6q-pcie 33800000.pcie: &nbsp;&nbsp;&nbsp;IO 0x1ff80000..0x1ff8ffff -&gt; 0x00000000 <br />[ &nbsp;&nbsp;&nbsp;2.369692] imx_sec_dsim_drv 32e10000.mipi_dsi: Failed to attach bridge: 32e10000.mipi_dsi <br />[ &nbsp;&nbsp;&nbsp;2.376096] imx6q-pcie 33800000.pcie: &nbsp;&nbsp;MEM 0x18000000..0x1fefffff -&gt; 0x18000000 <br />[ &nbsp;&nbsp;&nbsp;2.383494] imx_sec_dsim_drv 32e10000.mipi_dsi: failed to bind sec dsim bridge: -19 <br />[ &nbsp;&nbsp;&nbsp;2.391822] imx6q-pcie 33800000.pcie: PLL REF_CLK is used!. <br />[ &nbsp;&nbsp;&nbsp;2.399165] imx-drm soc@0:bus@32c00000:display-subsystem: bound 32e10000.mipi_dsi (ops imx_sec_dsim_ops) <br />[ &nbsp;&nbsp;&nbsp;2.422395] [drm] Initialized imx-drm 1.0.0 20120507 for soc@0:bus@32c00000:display-subsystem on minor 0 <br />[ &nbsp;&nbsp;&nbsp;2.432652] imx_usb 32e40000.usb: No over current polarity defined <br />[ &nbsp;&nbsp;&nbsp;2.438898] imx_usb 32e40000.usb: 32e40000.usb supply vbus not found, using dummy regulator <br />[ &nbsp;&nbsp;&nbsp;2.451562] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 3 mkt segment 0 supported-hw 0x8 0x1 <br />[ &nbsp;&nbsp;&nbsp;2.464014] mmc0: CQHCI version 5.10 <br />[ &nbsp;&nbsp;&nbsp;2.498241] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA <br />[ &nbsp;&nbsp;&nbsp;2.506427] mmc1: CQHCI version 5.10 <br />[ &nbsp;&nbsp;&nbsp;2.510077] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO <br />[ &nbsp;&nbsp;&nbsp;2.513014] imx6q-pcie 33800000.pcie: PCIe PLL locked after 20 us. <br />[ &nbsp;&nbsp;&nbsp;2.517232] random: fast init done <br />[ &nbsp;&nbsp;&nbsp;2.549377] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA <br />[ &nbsp;&nbsp;&nbsp;2.559081] debugfs: Directory '30020000.sai' with parent 'bt-sco-audio' already present! <br />[ &nbsp;&nbsp;&nbsp;2.567413] asoc-simple-card sound-bt-sco: bt-sco-pcm &lt;-&gt; 30020000.sai mapping ok <br />[ &nbsp;&nbsp;&nbsp;2.574935] asoc-simple-card sound-bt-sco: ASoC: no DMI vendor name! <br />[ &nbsp;&nbsp;&nbsp;2.581348] debugfs: File 'Playback' in directory 'dapm' already present! <br />[ &nbsp;&nbsp;&nbsp;2.588166] debugfs: File 'Capture' in directory 'dapm' already present! <br />[ &nbsp;&nbsp;&nbsp;2.598070] mmc0: queuing unknown CIS tuple 0x01 (3 bytes) <br />[ &nbsp;&nbsp;&nbsp;2.603880] debugfs: Directory '30030000.sai' with parent 'wm8524-audio' already present! <br />[ &nbsp;&nbsp;&nbsp;2.612178] asoc-simple-card sound-wm8524: wm8524-hifi &lt;-&gt; 30030000.sai mapping ok <br />[ &nbsp;&nbsp;&nbsp;2.619789] asoc-simple-card sound-wm8524: ASoC: no DMI vendor name! <br />[ &nbsp;&nbsp;&nbsp;2.633267] mmc0: queuing unknown CIS tuple 0x1a (5 bytes) <br />[ &nbsp;&nbsp;&nbsp;2.638796] imx-ak4458 sound-ak4458: ASoC: failed to init link ak4458: -517 <br />[ &nbsp;&nbsp;&nbsp;2.645785] imx-ak4458 sound-ak4458: snd_soc_register_card failed (-517) <br />[ &nbsp;&nbsp;&nbsp;2.655165] OF: graph: no port node found in /soc@0/bus@30800000/i2c@30a30000/tcpc@50/connector <br />[ &nbsp;&nbsp;&nbsp;2.663891] mmc0: queuing unknown CIS tuple 0x1b (8 bytes) <br />[ &nbsp;&nbsp;&nbsp;2.669408] OF: graph: no port node found in /soc@0/bus@30800000/i2c@30a30000/tcpc@50/connector <br />[ &nbsp;&nbsp;&nbsp;2.678544] mmc0: queuing unknown CIS tuple 0x14 (0 bytes) <br />[ &nbsp;&nbsp;&nbsp;2.701006] mmc0: queuing unknown CIS tuple 0x80 (1 bytes) <br />[ &nbsp;&nbsp;&nbsp;2.706553] mmc0: queuing unknown CIS tuple 0x81 (1 bytes) <br />[ &nbsp;&nbsp;&nbsp;2.712091] mmc0: queuing unknown CIS tuple 0x82 (1 bytes) <br />[ &nbsp;&nbsp;&nbsp;2.717614] mmc0: new ultra high speed SDR104 SDIO card at address 0001 <br />[ &nbsp;&nbsp;&nbsp;3.015739] ak4458 2-0010: ASoC: failed to probe component -6 <br />[ &nbsp;&nbsp;&nbsp;3.021623] imx-ak4458 sound-ak4458: ASoC: failed to instantiate card -6 <br />[ &nbsp;&nbsp;&nbsp;3.028417] imx-ak4458 sound-ak4458: snd_soc_register_card failed (-6) <br />[ &nbsp;&nbsp;&nbsp;3.038629] input: bd718xx-pwrkey as /devices/platform/soc@0/soc@0:bus@30800000/30a20000.i2c/i2c-0/0-004b/gpio-keys.1.auto/input/input1 <br />[ &nbsp;&nbsp;&nbsp;3.043169] mmc1: host does not support reading read-only switch, assuming write-enable <br />[ &nbsp;&nbsp;&nbsp;3.058841] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:01 UTC (1) <br />[ &nbsp;&nbsp;&nbsp;3.068482] cfg80211: Loading compiled-in X.509 certificates for regulatory database <br />[ &nbsp;&nbsp;&nbsp;3.080886] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <br />[ &nbsp;&nbsp;&nbsp;3.087650] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <br />[ &nbsp;&nbsp;&nbsp;3.094899] ALSA device list: <br />[ &nbsp;&nbsp;&nbsp;3.096288] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db <br />[ &nbsp;&nbsp;&nbsp;3.099252] &nbsp;&nbsp;#0: imx-spdif <br />[ &nbsp;&nbsp;&nbsp;3.109793] &nbsp;&nbsp;#1: imx-audio-micfil <br />[ &nbsp;&nbsp;&nbsp;3.113207] &nbsp;&nbsp;#2: bt-sco-audio <br />[ &nbsp;&nbsp;&nbsp;3.116263] &nbsp;&nbsp;#3: wm8524-audio <br />[ &nbsp;&nbsp;&nbsp;3.172648] mmc1: new ultra high speed DDR50 SDHC card at address e624 <br />[ &nbsp;&nbsp;&nbsp;3.180412] mmcblk1: mmc1:e624 SU16G 14.8 GiB &nbsp;<br />[ &nbsp;&nbsp;&nbsp;3.193719] &nbsp;mmcblk1: p1 p2 <br />[ &nbsp;&nbsp;&nbsp;3.522110] imx6q-pcie 33800000.pcie: Phy link never came up <br />[ &nbsp;&nbsp;&nbsp;3.527816] imx6q-pcie 33800000.pcie: failed to initialize host <br />[ &nbsp;&nbsp;&nbsp;3.533754] imx6q-pcie 33800000.pcie: unable to add pcie port. <br />[ &nbsp;&nbsp;&nbsp;3.558728] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) <br />[ &nbsp;&nbsp;&nbsp;3.566939] VFS: Mounted root (ext4 filesystem) on device 179:98. <br />[ &nbsp;&nbsp;&nbsp;3.574615] devtmpfs: mounted <br />[ &nbsp;&nbsp;&nbsp;3.578627] Freeing unused kernel memory: 2816K <br />[ &nbsp;&nbsp;&nbsp;3.583228] Run /sbin/init as init process <br />INIT: version 2.96 booting <br />Framebuffer /dev/fb0 not detected <br />Boot splashscreen disabled <br />Starting udev <br />[ &nbsp;&nbsp;&nbsp;3.911810] udevd[262]: starting version 3.2.9 <br />[ &nbsp;&nbsp;&nbsp;3.938426] random: udevd: uninitialized urandom read (16 bytes read) <br />[ &nbsp;&nbsp;&nbsp;3.945596] random: udevd: uninitialized urandom read (16 bytes read) <br />[ &nbsp;&nbsp;&nbsp;3.952954] random: udevd: uninitialized urandom read (16 bytes read) <br />[ &nbsp;&nbsp;&nbsp;3.983631] udevd[263]: starting eudev-3.2.9 <br />[ &nbsp;&nbsp;&nbsp;4.061197] imx-sdma 302b0000.dma-controller: external firmware not found, using ROM firmware <br />[ &nbsp;&nbsp;&nbsp;4.061234] imx-sdma 30bd0000.dma-controller: external firmware not found, using ROM firmware <br />[ &nbsp;&nbsp;&nbsp;4.079145] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 <br />[ &nbsp;&nbsp;&nbsp;4.089778] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin <br />[ &nbsp;&nbsp;&nbsp;4.180707] imx-sdma 302c0000.dma-controller: external firmware not found, using ROM firmware <br />[ &nbsp;&nbsp;&nbsp;4.333245] qca9377: loading out-of-tree module taints kernel. <br />[ &nbsp;&nbsp;&nbsp;4.431975] qca9377: loading driver v4.5.24.4 <br />[ &nbsp;&nbsp;&nbsp;4.436739] hifDeviceInserted: Dumping clocks (50000000,400000000) <br />[ &nbsp;&nbsp;&nbsp;4.442993] AR6000: Set async interrupt delay clock as 2. <br />[ &nbsp;&nbsp;&nbsp;4.587585] AR6000: configuration opcode 3 is not used for Linux SDIO stack &nbsp;<br />[ &nbsp;&nbsp;&nbsp;4.598653] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 <br />[ &nbsp;&nbsp;&nbsp;5.137761] HIF Interrupt processing is SYNC ONLY <br />[ &nbsp;&nbsp;&nbsp;5.142482] AR6000: configuration opcode 7 is only used for RTOS systems, not Linux systems <br />[ &nbsp;&nbsp;&nbsp;5.150865] AR6000: configuration opcode 5 is not used for Linux SDIO stack &nbsp;<br />[ &nbsp;&nbsp;&nbsp;5.161235] +HWT <br />[ &nbsp;&nbsp;&nbsp;5.168929] -HWT <br />[ &nbsp;&nbsp;&nbsp;5.172024] MAILBOX SWAP Service is enabled! <br />[ &nbsp;&nbsp;&nbsp;5.176319] Reduced Tx Complete service is enabled! <br />[ &nbsp;&nbsp;&nbsp;5.183719] HTCConnectService, host indicate support b2b bundle <br />[ &nbsp;&nbsp;&nbsp;5.191627] HTCConnectService, firmware decide to disabled b2b bundle <br />[ &nbsp;&nbsp;&nbsp;5.198073] HTC Service:0x0300 ep:1 TX flow control disabled <br />[ &nbsp;&nbsp;&nbsp;5.204434] HTCConnectService, host indicate support b2b bundle <br />[ &nbsp;&nbsp;&nbsp;5.214381] HTCConnectService, firmware decide to disabled b2b bundle <br />[ &nbsp;&nbsp;&nbsp;5.236549] target uses HTT version 3.53; host uses 3.28 <br />[ &nbsp;&nbsp;&nbsp;5.242007] Host SW:4.5.24.4, FW:0.0.0.23, HW:QCA93x7_REV1_1 <br />[ &nbsp;&nbsp;&nbsp;5.247890] ol_pktlog_init: pktlogmod_init successfull <br />[ &nbsp;&nbsp;&nbsp;5.253155] ath_hif_sdio: HIF (Atheros/multi-bss) <br />[ &nbsp;&nbsp;&nbsp;5.257940] qca9377: driver loaded in 828000 <br />[ &nbsp;&nbsp;&nbsp;5.298178] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) <br />[ &nbsp;&nbsp;&nbsp;5.707824] urandom_read: 4 callbacks suppressed <br />[ &nbsp;&nbsp;&nbsp;5.707831] random: dd: uninitialized urandom read (512 bytes read) <br />[ &nbsp;&nbsp;&nbsp;5.811537] Atheros 8031 ethernet 30be0000.ethernet-1:00: attached PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) <br />[ &nbsp;&nbsp;11.417755] random: crng init done <br />umount: can't unmount /mnt/.psplash: No such file or directory <br /><br />Poky (Yocto Project Reference Distro) 3.1.3 imx8mmevk /dev/ttymxc1 <br /><br />imx8mmevk login: root <br />root@imx8mmevk:~# rpm -qa | grep -i firmware <br />linux-firmware-ath10k-license-20200817-r0.noarch <br />firmware-qca9377-3.0.2-r0.noarch <br />linux-firmware-ath10k-20200817-r0.noarch <br />root@imx8mmevk:~# cd /lib/firmware/ <br />LICENSE.QualcommAtheros_ath10k &nbsp;ath10k/ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;qca/ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;qca9377/ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;regulatory.db &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;regulatory.db.p7s &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;wlan/<br /><br />I noticed that my image size jumped form 329M to 621M so thought that was interesting.<br /><br />Smoking sstate &amp; tmp and trying build again with:<br /><br /></span><br /><span style="font-family: monospace;"><span style="font-family: monospace;"><span style="color: #000000; background-color: #ffffff;">IMAGE_INSTALL_append = " firmware-imx-sdma-imx7d firmware-imx-epdc"</span><br /></span></span>