Re: [meta-freescale] Wandboard WB-IMX6U-BW CAM-OV5645 camera

["Terry Barnaby" <terry@beam.ltd.uk>]

Hi Andrey,

On 19/02/2021 12:59, Andrey Zhizhikin wrote:
> Hello Terry and Fabio,
>
> On Fri, Feb 19, 2021 at 12:09 PM Fabio Estevam <festevam@gmail.com> wrote:
>> Hi Terry,
>>
>> On Fri, Feb 19, 2021 at 4:25 AM Terry Barnaby <terry@beam.ltd.uk> wrote:
>>
>>> The u-boot master of git://git.denx.de/u-boot.git u-boot-git/ does work
>>> fine on the Wandboard revD1, as I tested above, thanks for including
>>> this commit. It's the Yocto meta-freescale build I was having problems with.
>> Ok, I am adding Otavio on Cc.
>>
>> I have the impression that the Yocto meta-freescale is using an older U-Boot.
>>
>>> Maybe I am doing something wrong. I checked the
>>> http://freescale.github.io code out using:
>>>
>>> repo init -u https://github.com/Freescale/fsl-community-bsp-platform
>>>
>>> (also tried "repo init -u
>>> https://github.com/Freescale/fsl-community-bsp-platform -b dunfell")
>>>
>>> When I "bitbake u-boot" with this the u-boot build source tree does not
>>> contain "arch/arm/dts/imx6dl-wandboard-revd1.dts" which is a file that
>>> git commit would have added ?
>> It is the commit that I pointed out that introduces
>> arch/arm/dts/imx6dl-wandboard-revd1.dts.
>>
>> Such commit entered U-Boot 2020.07.
>>
>>> I assumed that the http://freescale.github.io Yocto master would be
>>> using the latest upsteam git u-boot if I didn't specify a particular
>>> branch, I guess I am wrong on that.
>> Hopefully, Otavio can help clarifying. It could be that the U-Boot
>> version needs to be bumped.
> Indeed, the u-boot-fslc that is a part of Community BSP has a version
> 2020.04 for [dunfell] branch. [master] branch has already been
> advanced to 2020.10 so it should have that DTS in that you're looking
> for.
>
> I do not know if it is safe to upgrade the U-Boot on the LTS version,
> I'd leave it to Otavio to decide.
>
> Terry,
> Can you try to initialize your BSP build from [master] branch and test
> to see if (a) you have a support for the OV5645; and (b) whether that
> would be an option for you to utilize [master] instead of [dunfell]?

Thanks for the reply.

I'm a bit new to meta-freescale and the use of the "repo" utility. I did a:

"repo init -u https://github.com/Freescale/fsl-community-bsp-platform" 
ie without "-b <branch>" which I assumed would pull the master ?

Should I do something else to get the master branch of all the necessary 
GIT repositories ?


>
>> Regards,
>>
>> Fabio Estevam
>>
>> 
>>
>