Hi Brian,
On Mon, Nov 8, 2021 at 1:01 AM Brian Hutchinson <b.hutchman@gmail.com> wrote:
>
> Hi,
>
> I'm using u-boot U-Boot 2019.04-4.19.35-1.1.0+g4d377539a1 in pre-programmed NOR flash and was using linux-fslc-imx 5.4.114 kernel and fw_printenv/fw_setenv were working fine.
>
> After upgrading to linux-fslc-imx 5.10.69, fw_setenv will not change any u-boot variable. fw_printenv looks like it is working ok. I've verified all my .config settings are the same with regard to MTD etc as my older 5.4.114 kernel.
>
> Any ideas what could be broken?
Could it be that on 5.10 the MTD devices are registered in a different
order, which causes a different mtd numbering of the devices?
Nope, cat /proc/mtd looks good. Same order as in previous kernels.
Does fw_setenv give any error?
It does not. It shows no signs of a problem, returns no errors or warnings at all. It "looks" like it worked normal but does not change the u-boot environment variable.
Regards,
Brian