Hi Kwon,

1. When you import a layer, there is no meta information to fill in the = layer features, in contrast to the normal layers that are loaded from the OE Layer Index. For this layer, I observe that while there= is a “master” branch for “meta-odroid”, Alas, Phillipe has not yet = created a “rocko” branch in the OE Layer Index for his layer.

2. If you click on the Machine tab in this i= mported layer, you will see the message “Toaster does not h= ave machine information for the meta-odroid layer. Sadly, machine information cannot be obtained from builds, = so this page will remain empty.”<= /o:p>

In this case you would set the Machine type directly entering the known = values from the layer.

3. If you click on the Recipe tab in this im= ported layer, you will see the message “Toaster does not ha= ve recipe information for the meta-odroid layer. Toaster learns about layers when you bu= ild them. If this layer provides any recipes, they will be listed here afte= r you build the meta-odroid layer.”

In this case you would enter the recipe name directly and build it, ente= ring the known values from the layer. Once you build that recipe, it will then appear in the Recipe tab for the imported layer.

I tested this by setting the Machine to “odroid-c2” and building the “atf-native“= ; recipe, and indeed “atf-native” did appear as a recipe under the custom layer. I= also tried the recipe “odroid-c2-init ” but bitbake did not like it, so there is= something different with this recipe.

4. In general, when you import a layer Toaster assumes you know the cont= ent and that you will enter the appropriate values (as you would on the command line). I can consider an enhancement request to attem= pt to discover the machines, recipes, image recipes, and classes from an im= ported layer, but I expect that this will be a non-trivial effort.

- David

Fr= om: toaster-bounces@yoctoproject.org [mailto:toaster-bounces@yoctopro= ject.org] On Behalf Of tykwon
Sent: Tuesday, November 14, 2017 11:17 PM
To: toaster@yoctoproject.org
Subject: [Toaster] The machine of the added layer does not come out.=

I am yocto n= ewbie.

I am using p= oky-rocko-18.0.0.

I have a pro= blem with the "imoport layer" as a toaster.

I added meta= -odroid(https://github.c= om/akuster/meta-odroid) as a toaster.

I added meta= -odroid as a toaster, but there is no machine entry.

However, the= re are a total of 6 machiies added to my layer(meta-odroid)(https://github= .com/akuster/meta-odroid/tree/master/conf/machine).

<= /o:p>

How do I get= the meta-odroid machine I added as an "import layer" to work pro= perly?

Is there any= thing wrong with my setup?

<= /o:p>

The figure b= elow shows the current settings of my import layer.

https://i.imgur.com/G2GkCbX.png

<= /o:p>

I'm sorry I = do not have enough English. :)

<= /o:p>

Best regards= .

kwon