From: Angus Ainslie <angus@akkea.ca>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: "BOUGH CHEN" <haibo.chen@nxp.com>,
"Fabio Estevam" <festevam@gmail.com>,
"Ulf Hansson" <ulf.hansson@linaro.org>,
"Guido Günther" <agx@sigxcpu.org>,
linux-mmc <linux-mmc@vger.kernel.org>,
"Adrian Hunter" <adrian.hunter@intel.com>,
dl-linux-imx <linux-imx@nxp.com>,
"Sascha Hauer" <kernel@pengutronix.de>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: sdhci timeout on imx8mq
Date: Wed, 23 Dec 2020 13:06:08 -0800 [thread overview]
Message-ID: <0c2bdbe7b99f7edd6c39272d8307cd33@akkea.ca> (raw)
In-Reply-To: <4a1fb9fa69d6fdb0ec2d7c390112d412d512ff13.camel@pengutronix.de>
Hi Lucas,
On 2020-12-18 12:07, Lucas Stach wrote:
>
> Can you show me the full fail log? I do not meet this issue on my side,
> besides, which kind of uboot do you use?
>
I've got the dmesg output and it's 33K. Should I send it to the list or
do you want to see it out of band ?
The 2 relevant sections are
[ 13.281867] mmc0: Timeout waiting for hardware interrupt.
[ 13.287310] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 13.293810] mmc0: sdhci: Sys addr: 0x00000800 | Version: 0x00000002
[ 13.300290] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001
[ 13.306774] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013
[ 13.313258] mmc0: sdhci: Present: 0x01f88a0a | Host ctl: 0x00000011
[ 13.319738] mmc0: sdhci: Power: 0x00000002 | Blk gap: 0x00000080
[ 13.326218] mmc0: sdhci: Wake-up: 0x00000008 | Clock: 0x000020ff
[ 13.332699] mmc0: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
[ 13.339178] mmc0: sdhci: Int enab: 0x107f100b | Sig enab: 0x107f100b
[ 13.345658] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00008402
[ 13.352141] mmc0: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407
[ 13.358622] mmc0: sdhci: Cmd: 0x0000083a | Max curr: 0x00ffffff
[ 13.365106] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xffffffff
[ 13.371589] mmc0: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d02700
[ 13.378068] mmc0: sdhci: Host ctl2: 0x00000000
[ 13.382554] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0xe5b90200
[ 13.389042] mmc0: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS
DUMP =========
[ 13.396661] mmc0: sdhci-esdhc-imx: cmd debug status: 0x2100
[ 13.402361] mmc0: sdhci-esdhc-imx: data debug status: 0x2200
[ 13.408119] mmc0: sdhci-esdhc-imx: trans debug status: 0x2300
[ 13.413991] mmc0: sdhci-esdhc-imx: dma debug status: 0x2402
[ 13.419718] mmc0: sdhci-esdhc-imx: adma debug status: 0x2501
[ 13.425478] mmc0: sdhci-esdhc-imx: fifo debug status: 0x2610
[ 13.431294] mmc0: sdhci-esdhc-imx: async fifo debug status: 0x2751
[ 13.437600] mmc0: sdhci: ============================================
[ 13.453076] mmc0: error -110 whilst initialising MMC card
[ 13.662288] mmc0: new HS400 MMC card at address 0001
[ 13.676191] mmcblk0: mmc0:0001 032G32 29.1 GiB
[ 13.684755] mmcblk0boot0: mmc0:0001 032G32 partition 1 4.00 MiB
[ 13.694405] mmcblk0boot1: mmc0:0001 032G32 partition 2 4.00 MiB
[ 13.702264] mmcblk0rpmb: mmc0:0001 032G32 partition 3 4.00 MiB,
chardev (245:0)
[ 13.715966] mmcblk0: p1 p2
[ 29.665891] mmc1: Timeout waiting for hardware interrupt.
[ 29.671310] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 29.677758] mmc1: sdhci: Sys addr: 0x00000800 | Version: 0x00000002
[ 29.684201] mmc1: sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000001
[ 29.690642] mmc1: sdhci: Argument: 0x12008004 | Trn mode: 0x00000013
[ 29.697086] mmc1: sdhci: Present: 0x01f88a0a | Host ctl: 0x00000013
[ 29.703529] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000080
[ 29.709980] mmc1: sdhci: Wake-up: 0x00000008 | Clock: 0x0000003f
[ 29.716426] mmc1: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
[ 29.722868] mmc1: sdhci: Int enab: 0x107f110b | Sig enab: 0x107f110b
[ 29.729310] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00008402
[ 29.735754] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407
[ 29.742212] mmc1: sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff
[ 29.748658] mmc1: sdhci: Resp[0]: 0x00002000 | Resp[1]: 0x00000000
[ 29.755099] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 29.761540] mmc1: sdhci: Host ctl2: 0x00000000
[ 29.765989] mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0xe6605200
[ 29.772439] mmc1: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS
DUMP =========
[ 29.780026] mmc1: sdhci-esdhc-imx: cmd debug status: 0x2100
[ 29.785692] mmc1: sdhci-esdhc-imx: data debug status: 0x2200
[ 29.791448] mmc1: sdhci-esdhc-imx: trans debug status: 0x2300
[ 29.797284] mmc1: sdhci-esdhc-imx: dma debug status: 0x2402
[ 29.802943] mmc1: sdhci-esdhc-imx: adma debug status: 0x2501
[ 29.808690] mmc1: sdhci-esdhc-imx: fifo debug status: 0x2690
[ 29.814437] mmc1: sdhci-esdhc-imx: async fifo debug status: 0x2751
[ 29.820701] mmc1: sdhci: ============================================
Thanks
Angus
WARNING: multiple messages have this Message-ID (diff)
From: Angus Ainslie <angus@akkea.ca>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: "Ulf Hansson" <ulf.hansson@linaro.org>,
"Guido Günther" <agx@sigxcpu.org>,
linux-mmc <linux-mmc@vger.kernel.org>,
"Adrian Hunter" <adrian.hunter@intel.com>,
"BOUGH CHEN" <haibo.chen@nxp.com>,
dl-linux-imx <linux-imx@nxp.com>,
"Sascha Hauer" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: sdhci timeout on imx8mq
Date: Wed, 23 Dec 2020 13:06:08 -0800 [thread overview]
Message-ID: <0c2bdbe7b99f7edd6c39272d8307cd33@akkea.ca> (raw)
In-Reply-To: <4a1fb9fa69d6fdb0ec2d7c390112d412d512ff13.camel@pengutronix.de>
Hi Lucas,
On 2020-12-18 12:07, Lucas Stach wrote:
>
> Can you show me the full fail log? I do not meet this issue on my side,
> besides, which kind of uboot do you use?
>
I've got the dmesg output and it's 33K. Should I send it to the list or
do you want to see it out of band ?
The 2 relevant sections are
[ 13.281867] mmc0: Timeout waiting for hardware interrupt.
[ 13.287310] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 13.293810] mmc0: sdhci: Sys addr: 0x00000800 | Version: 0x00000002
[ 13.300290] mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001
[ 13.306774] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013
[ 13.313258] mmc0: sdhci: Present: 0x01f88a0a | Host ctl: 0x00000011
[ 13.319738] mmc0: sdhci: Power: 0x00000002 | Blk gap: 0x00000080
[ 13.326218] mmc0: sdhci: Wake-up: 0x00000008 | Clock: 0x000020ff
[ 13.332699] mmc0: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
[ 13.339178] mmc0: sdhci: Int enab: 0x107f100b | Sig enab: 0x107f100b
[ 13.345658] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00008402
[ 13.352141] mmc0: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407
[ 13.358622] mmc0: sdhci: Cmd: 0x0000083a | Max curr: 0x00ffffff
[ 13.365106] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xffffffff
[ 13.371589] mmc0: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d02700
[ 13.378068] mmc0: sdhci: Host ctl2: 0x00000000
[ 13.382554] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0xe5b90200
[ 13.389042] mmc0: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS
DUMP =========
[ 13.396661] mmc0: sdhci-esdhc-imx: cmd debug status: 0x2100
[ 13.402361] mmc0: sdhci-esdhc-imx: data debug status: 0x2200
[ 13.408119] mmc0: sdhci-esdhc-imx: trans debug status: 0x2300
[ 13.413991] mmc0: sdhci-esdhc-imx: dma debug status: 0x2402
[ 13.419718] mmc0: sdhci-esdhc-imx: adma debug status: 0x2501
[ 13.425478] mmc0: sdhci-esdhc-imx: fifo debug status: 0x2610
[ 13.431294] mmc0: sdhci-esdhc-imx: async fifo debug status: 0x2751
[ 13.437600] mmc0: sdhci: ============================================
[ 13.453076] mmc0: error -110 whilst initialising MMC card
[ 13.662288] mmc0: new HS400 MMC card at address 0001
[ 13.676191] mmcblk0: mmc0:0001 032G32 29.1 GiB
[ 13.684755] mmcblk0boot0: mmc0:0001 032G32 partition 1 4.00 MiB
[ 13.694405] mmcblk0boot1: mmc0:0001 032G32 partition 2 4.00 MiB
[ 13.702264] mmcblk0rpmb: mmc0:0001 032G32 partition 3 4.00 MiB,
chardev (245:0)
[ 13.715966] mmcblk0: p1 p2
[ 29.665891] mmc1: Timeout waiting for hardware interrupt.
[ 29.671310] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 29.677758] mmc1: sdhci: Sys addr: 0x00000800 | Version: 0x00000002
[ 29.684201] mmc1: sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000001
[ 29.690642] mmc1: sdhci: Argument: 0x12008004 | Trn mode: 0x00000013
[ 29.697086] mmc1: sdhci: Present: 0x01f88a0a | Host ctl: 0x00000013
[ 29.703529] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000080
[ 29.709980] mmc1: sdhci: Wake-up: 0x00000008 | Clock: 0x0000003f
[ 29.716426] mmc1: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
[ 29.722868] mmc1: sdhci: Int enab: 0x107f110b | Sig enab: 0x107f110b
[ 29.729310] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00008402
[ 29.735754] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407
[ 29.742212] mmc1: sdhci: Cmd: 0x0000353a | Max curr: 0x00ffffff
[ 29.748658] mmc1: sdhci: Resp[0]: 0x00002000 | Resp[1]: 0x00000000
[ 29.755099] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 29.761540] mmc1: sdhci: Host ctl2: 0x00000000
[ 29.765989] mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0xe6605200
[ 29.772439] mmc1: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS
DUMP =========
[ 29.780026] mmc1: sdhci-esdhc-imx: cmd debug status: 0x2100
[ 29.785692] mmc1: sdhci-esdhc-imx: data debug status: 0x2200
[ 29.791448] mmc1: sdhci-esdhc-imx: trans debug status: 0x2300
[ 29.797284] mmc1: sdhci-esdhc-imx: dma debug status: 0x2402
[ 29.802943] mmc1: sdhci-esdhc-imx: adma debug status: 0x2501
[ 29.808690] mmc1: sdhci-esdhc-imx: fifo debug status: 0x2690
[ 29.814437] mmc1: sdhci-esdhc-imx: async fifo debug status: 0x2751
[ 29.820701] mmc1: sdhci: ============================================
Thanks
Angus
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-23 21:07 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-03 19:19 sdhci timeout on imx8mq Fabio Estevam
2020-02-03 19:19 ` Fabio Estevam
2020-02-05 9:26 ` Guido Günther
2020-02-05 9:26 ` Guido Günther
2020-02-05 13:18 ` Fabio Estevam
2020-02-05 13:18 ` Fabio Estevam
2020-02-07 2:11 ` BOUGH CHEN
2020-02-07 2:11 ` BOUGH CHEN
[not found] ` <VI1PR04MB504091C7991353F6092A8D91901A0@VI1PR04MB5040.eurprd04.prod.outlook.com>
2020-02-13 10:53 ` Fabio Estevam
2020-02-13 10:53 ` Fabio Estevam
2020-06-30 19:39 ` Angus Ainslie
2020-06-30 19:39 ` Angus Ainslie
2020-07-07 12:44 ` Fabio Estevam
2020-07-07 12:44 ` Fabio Estevam
2020-07-08 1:32 ` BOUGH CHEN
2020-07-08 1:32 ` BOUGH CHEN
2020-12-18 20:07 ` Lucas Stach
2020-12-18 20:07 ` Lucas Stach
2020-12-18 20:45 ` Angus Ainslie
2020-12-18 20:45 ` Angus Ainslie
2020-12-23 21:06 ` Angus Ainslie [this message]
2020-12-23 21:06 ` Angus Ainslie
2021-01-05 15:06 ` Lucas Stach
2021-01-05 15:06 ` Lucas Stach
2021-01-06 9:29 ` Bough Chen
2021-01-06 9:29 ` Bough Chen
2021-01-06 15:09 ` Lucas Stach
2021-01-06 15:09 ` Lucas Stach
2021-01-07 1:47 ` Bough Chen
2021-01-07 1:47 ` Bough Chen
2021-01-06 18:56 ` Fabio Estevam
2021-01-06 18:56 ` Fabio Estevam
2021-01-07 1:30 ` Jacky Bai
2021-01-07 1:30 ` Jacky Bai
2021-01-07 11:26 ` Lucas Stach
2021-01-07 11:26 ` Lucas Stach
2021-01-08 1:27 ` Jacky Bai
2021-01-08 1:27 ` Jacky Bai
2021-03-09 7:35 ` Heiko Thiery
2021-03-09 7:35 ` Heiko Thiery
2021-01-19 2:35 ` Peng Fan
2021-01-19 2:35 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0c2bdbe7b99f7edd6c39272d8307cd33@akkea.ca \
--to=angus@akkea.ca \
--cc=adrian.hunter@intel.com \
--cc=agx@sigxcpu.org \
--cc=festevam@gmail.com \
--cc=haibo.chen@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.