[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Tom,

this should be my last PR for the release. I checked which fixes should
go into release and all other patches can wait. I am starting to merge
pending patches into -next.

Most of commits are fixes (mx25, pciimx,..). Exception is pico-imx7d: I
merged since a lot of time, and I convinced I have already sent a
PR...sorry, for that.

For all imxers: let me know if I missed aome patches that *must* flow
into 2017.07. IMHO all of the pending patches can wait and I merge now
in -next.

The following changes since commit ccbbada0a59fead35495409d0c2c7bcb22a40278:

  Merge branch 'master' of git://git.denx.de/u-boot-mmc (2017-05-30
14:07:23 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 65496a34835cb4c9547bd02dd15b018c333add9d:

  mx6: soc: Fix typo in temperature unit name (2017-06-27 09:06:09 +0200)

----------------------------------------------------------------
Benoît Thébaudeau (4):
      mmc: fsl_esdhc: Allow all supported prescaler values
      mx25: Fix imx_get_perclk()
      mx25: Add function to set PER clocks
      mx25pdk: Set the eSDHC PER clock to 48 MHz

Fabio Estevam (5):
      mx7dsabresd: Increase CONFIG_ENV_OFFSET
      mx6sabresd: Rename target to mx6sabresd_defconfig
      mx6sabresd: Update the config file
      mx6sabresd: Update to SPL only mode
      mx6: soc: Fix typo in temperature unit name

Jagan Teki (9):
      mmc: fsl_esdhc: Move non DM_MMC code in #ifndef CONFIG_DM_MMC
      engicam: Move SPL mmc configs under CONFIG_SPL_BUILD
      icorem6: Recover missing nand defconfig
      drivers: net: Kconfig: Add PHY_MICREL_KSZ9021 entry
      engicam: Move PHY configs to defconfig
      icorem6: Remove unused FEC configs
      engicam: Set console env on board_late_init
      engicam: Add fdt_addr env value based on cpu_type
      engicam: Generate single config file

Lothar Waßmann (1):
      arm: mx6: remove unused config variable CONFIG_SPL_NAND_MXS

Peng Fan (2):
      regulator: pfuze100: add SPDX License
      regulator: pfuze100: unsigned compared against 0

Tim Harvey (1):
      drivers: pci: imx: add imx_pcie_remove function

Vanessa Maegima (1):
      pico-imx7d: Add initial support

 arch/arm/cpu/arm926ejs/mx25/generic.c                      |  30 +++++++++-
 arch/arm/cpu/armv7/mx6/soc.c                               |   2 +-
 arch/arm/cpu/armv7/mx7/Kconfig                             |   8 +++
 arch/arm/imx-common/cpu.c                                  |   3 +
 arch/arm/include/asm/arch-mx25/clock.h                     |   1 +
 board/engicam/common/board.c                               |   5 ++
 board/engicam/geam6ul/Kconfig                              |   2 +-
 board/engicam/icorem6/Kconfig                              |   2 +-
 board/engicam/icorem6_rqs/Kconfig                          |   2 +-
 board/engicam/isiotmx6ul/Kconfig                           |   2 +-
 board/freescale/mx25pdk/mx25pdk.c                          |   6 ++
 board/freescale/mx6sabresd/MAINTAINERS                     |   4 +-
 board/freescale/mx6sabresd/README                          |  84
++++++++++------------------
 board/technexion/pico-imx7d/Kconfig                        |  15 +++++
 board/technexion/pico-imx7d/MAINTAINERS                    |   7 +++
 board/technexion/pico-imx7d/Makefile                       |   6 ++
 board/technexion/pico-imx7d/README                         |  49
++++++++++++++++
 board/technexion/pico-imx7d/imximage.cfg                   |  98
++++++++++++++++++++++++++++++++
 board/technexion/pico-imx7d/pico-imx7d.c                   | 289
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configs/imx6qdl_icore_mmc_defconfig                        |   2 +
 configs/imx6qdl_icore_nand_defconfig                       |  47
++++++++++++++++
 configs/imx6qdl_icore_rqs_mmc_defconfig                    |   3 +
 configs/imx6ul_geam_mmc_defconfig                          |   2 +
 configs/imx6ul_geam_nand_defconfig                         |   2 +
 configs/imx6ul_isiot_emmc_defconfig                        |   2 +
 configs/imx6ul_isiot_mmc_defconfig                         |   2 +
 configs/imx6ul_isiot_nand_defconfig                        |   2 +
 configs/{mx6sabresd_spl_defconfig => mx6sabresd_defconfig} |   0
 configs/pico-imx7d_defconfig                               |  35
++++++++++++
 drivers/mmc/fsl_esdhc.c                                    |  53
+++++++++---------
 drivers/net/phy/Kconfig                                    |   8 +++
 drivers/pci/pcie_imx.c                                     |  38
+++++++++++++
 drivers/power/regulator/pfuze100.c                         |  14 ++++-
 include/configs/{imx6qdl_icore.h => imx6-engicam.h}        |  47
+++++++++++-----
 include/configs/imx6_spl.h                                 |   5 --
 include/configs/imx6qdl_icore_rqs.h                        | 147
------------------------------------------------
 include/configs/imx6ul_geam.h                              | 195
----------------------------------------------------------------
 include/configs/imx6ul_isiot.h                             | 196
----------------------------------------------------------------
 include/configs/mx7dsabresd.h                              |   2 +-
 include/configs/pico-imx7d.h                               | 143
+++++++++++++++++++++++++++++++++++++++++++++++
 include/pci.h                                              |   4 ++
 scripts/config_whitelist.txt                               |   1 -
 42 files changed, 912 insertions(+), 653 deletions(-)
 create mode 100644 board/technexion/pico-imx7d/Kconfig
 create mode 100644 board/technexion/pico-imx7d/MAINTAINERS
 create mode 100644 board/technexion/pico-imx7d/Makefile
 create mode 100644 board/technexion/pico-imx7d/README
 create mode 100644 board/technexion/pico-imx7d/imximage.cfg
 create mode 100644 board/technexion/pico-imx7d/pico-imx7d.c
 create mode 100644 configs/imx6qdl_icore_nand_defconfig
 rename configs/{mx6sabresd_spl_defconfig => mx6sabresd_defconfig} (100%)
 create mode 100644 configs/pico-imx7d_defconfig
 rename include/configs/{imx6qdl_icore.h => imx6-engicam.h} (84%)
 delete mode 100644 include/configs/imx6qdl_icore_rqs.h
 delete mode 100644 include/configs/imx6ul_geam.h
 delete mode 100644 include/configs/imx6ul_isiot.h
 create mode 100644 include/configs/pico-imx7d.h

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================