[U-Boot] [PULL] Please pull u-boot-imx

From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PULL] Please pull u-boot-imx
Date: Fri, 31 Aug 2018 15:04:31 +0200	[thread overview]
Message-ID: <48c52f49-8882-821c-70e5-3dfa34c7722b@denx.de> (raw)

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:

  configs: am57xx: change default board name to beagle_x15 (2018-08-26
12:26:16 -0400)

are available in the Git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:

  imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
12:08:43 +0200)

----------------------------------------------------------------
Alex Kiernan (1):
      Cleanup CONFIG_BOOTDELAY on cl-som-imx7

Anson Huang (3):
      imx: mx7: psci: improve cpu hotplug flow
      imx: mx7: add gpc initialization for low power mode
      imx: mx7: add system suspend/resume support

Denis Zalevskiy (6):
      board: ge: Remove EEPROM bus param from read_vpd()
      board: ge: Move VPD EEPROM configuration to the defconfig
      bootcount: i2c: Add bus switching to the I2C bootcount driver
      bootcount: Configure length limit for I2C bootcount
      board: ge: Move VPD reading to the vpd_reader
      board: ge: Store bootcount in EEPROM on PPD and Bx50v3

Martin Kaiser (1):
      watchdog: mx25: use the imx_watchdog driver for mx25

Stefan Agner (2):
      board: toradex: common: fail gracefully on missing NAND chip
      colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support

Stefano Babic (2):
      Merge branch 'master' of git://git.denx.de/u-boot into master
      imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig

SÃ©bastien Szymanski (1):
      ARM: opos6ul: make the board boot again

Ye Li (6):
      imx: imx6sx-sdb: Enable DM QSPI driver
      imx: imx6sx-sabreauto: convert to use DM QSPI driver
      imx: imx7d-sdb: Add DM QSPI support
      dts: imx6ul: Update alias to support DM
      dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
      imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot

 arch/arm/dts/Makefile                             |   7 +-
 arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi         |  16 +
 arch/arm/dts/imx6sx-sabreauto.dts                 |  40 ++
 arch/arm/dts/imx6sx-sdb-u-boot.dtsi               |  16 +
 arch/arm/dts/imx6sx.dtsi                          |  12 +-
 arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi         |  10 +
 arch/arm/dts/imx6ul-14x14-evk.dts                 | 427 +++++++++++++++++++
 arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi           |  10 +
 arch/arm/dts/imx6ul-9x9-evk.dts                   | 471
+++++++++++++++++++++
 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi           |  28 ++
 arch/arm/dts/imx6ul-opos6ul.dtsi                  |   2 -
 arch/arm/dts/imx6ul-opos6uldev-u-boot.dts         |  25 ++
 arch/arm/dts/imx6ul-opos6uldev.dts                |   2 -
 arch/arm/dts/imx6ul.dtsi                          |  13 +-
 arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi           |  10 +
 arch/arm/dts/imx7d-sdb-qspi.dts                   |  44 ++
 arch/arm/dts/imx7d-sdb.dts                        |   6 +-
 arch/arm/dts/imx7d.dtsi                           |  12 +
 arch/arm/dts/imx7s.dtsi                           |  22 +-
 arch/arm/include/asm/arch-mx25/imx-regs.h         |   1 +
 arch/arm/mach-imx/mx7/Makefile                    |   2 +-
 arch/arm/mach-imx/mx7/psci-mx7.c                  | 472
+++++++++++++++++++++-
 arch/arm/mach-imx/mx7/psci-suspend.S              |  67 +++
 arch/arm/mach-imx/mx7/soc.c                       | 103 +++++
 board/freescale/mx6sxsabreauto/mx6sxsabreauto.c   |  24 --
 board/freescale/mx6sxsabresd/mx6sxsabresd.c       |  25 --
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++--------
 board/freescale/mx7dsabresd/mx7dsabresd.c         |  16 -
 board/ge/bx50v3/Kconfig                           |   2 +
 board/ge/bx50v3/bx50v3.c                          |  57 +--
 board/ge/common/Kconfig                           |  14 +
 board/ge/common/vpd_reader.c                      |  57 ++-
 board/ge/common/vpd_reader.h                      |  16 +-
 board/ge/mx53ppd/Kconfig                          |   2 +
 board/ge/mx53ppd/mx53ppd.c                        |  50 +--
 board/toradex/colibri_imx7/Kconfig                |  42 +-
 board/toradex/colibri_imx7/MAINTAINERS            |   4 +
 board/toradex/colibri_imx7/colibri_imx7.c         |  41 +-
 board/toradex/common/tdx-cfg-block.c              |   7 +-
 configs/ge_bx50v3_defconfig                       |  27 +-
 configs/mx53ppd_defconfig                         |  29 +-
 configs/mx6sxsabreauto_defconfig                  |   2 +
 configs/mx6sxsabresd_defconfig                    |   7 +
 configs/mx6ul_14x14_evk_defconfig                 |  17 +-
 configs/mx6ul_9x9_evk_defconfig                   |  20 +-
 configs/mx7dsabresd_qspi_defconfig                |  84 ++++
 configs/opos6uldev_defconfig                      |   2 +-
 drivers/bootcount/Kconfig                         |  21 +-
 drivers/bootcount/bootcount_i2c.c                 |  78 +++-
 drivers/watchdog/Makefile                         |   2 +-
 include/configs/cl-som-imx7.h                     |   2 -
 include/configs/colibri_imx7.h                    |  90 ++++-
 include/configs/ge_bx50v3.h                       |   6 +-
 include/configs/mx53ppd.h                         |   6 +-
 include/configs/mx6sxsabresd.h                    |   4 +
 include/configs/mx6ul_14x14_evk.h                 |  13 +-
 include/configs/mx7dsabresd.h                     |   4 +-
 57 files changed, 2376 insertions(+), 421 deletions(-)
 create mode 100644 arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6sx-sdb-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-14x14-evk.dts
 create mode 100644 arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-9x9-evk.dts
 create mode 100644 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx6ul-opos6uldev-u-boot.dts
 create mode 100644 arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx7d-sdb-qspi.dts
 create mode 100644 arch/arm/mach-imx/mx7/psci-suspend.S
 create mode 100644 board/ge/common/Kconfig
 create mode 100644 configs/mx7dsabresd_qspi_defconfig

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================