[PATCH 05/44] staging: spmi: hisi-spmi-controller: adjust whitespaces at defines

[Mauro Carvalho Chehab <mchehab+huawei@kernel.org>]

Some defines are not aligned with tab=8, which is the
style defined on Linux. Adjust them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../staging/hikey9xx/hisi-spmi-controller.c   | 26 ++++++++++---------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c b/drivers/staging/hikey9xx/hisi-spmi-controller.c
index 99cf757d76fe..7fae267a6062 100644
--- a/drivers/staging/hikey9xx/hisi-spmi-controller.c
+++ b/drivers/staging/hikey9xx/hisi-spmi-controller.c
@@ -18,10 +18,10 @@
 /*
  * SPMI register addr
  */
-#define SPMI_CHANNEL_OFFSET					0x0300
-#define SPMI_SLAVE_OFFSET						0x20
+#define SPMI_CHANNEL_OFFSET				0x0300
+#define SPMI_SLAVE_OFFSET				0x20
 
-#define SPMI_APB_SPMI_CMD_BASE_ADDR				0x0100
+#define SPMI_APB_SPMI_CMD_BASE_ADDR			0x0100
 
 #define SPMI_APB_SPMI_WDATA0_BASE_ADDR			0x0104
 #define SPMI_APB_SPMI_WDATA1_BASE_ADDR			0x0108
@@ -35,21 +35,21 @@
 #define SPMI_APB_SPMI_RDATA2_BASE_ADDR			0x020c
 #define SPMI_APB_SPMI_RDATA3_BASE_ADDR			0x0210
 
-#define SPMI_PER_DATAREG_BYTE					4
+#define SPMI_PER_DATAREG_BYTE				4
 /*
  * SPMI cmd register
  */
-#define SPMI_APB_SPMI_CMD_EN						BIT(31)
+#define SPMI_APB_SPMI_CMD_EN				BIT(31)
 #define SPMI_APB_SPMI_CMD_TYPE_OFFSET			24
 #define SPMI_APB_SPMI_CMD_LENGTH_OFFSET			20
-#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET			16
-#define SPMI_APB_SPMI_CMD_ADDR_OFFSET				0
 
 #define bswap_32(X)   \
     ((((u32)(X) & 0xff000000) >> 24) | \
      (((u32)(X) & 0x00ff0000) >> 8) | \
      (((u32)(X) & 0x0000ff00) << 8) | \
      (((u32)(X) & 0x000000ff) << 24))
+#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET		16
+#define SPMI_APB_SPMI_CMD_ADDR_OFFSET			0
 
 /* Command Opcodes */
 
@@ -70,15 +70,15 @@ enum spmi_controller_cmd_op_code {
 /*
  * SPMI status register
  */
-#define SPMI_APB_TRANS_DONE						BIT(0)
-#define SPMI_APB_TRANS_FAIL						BIT(2)
+#define SPMI_APB_TRANS_DONE			BIT(0)
+#define SPMI_APB_TRANS_FAIL			BIT(2)
 
 /* Command register fields */
 #define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT	16
 
 /* Maximum number of support PMIC peripherals */
 #define SPMI_CONTROLLER_TIMEOUT_US		1000
-#define SPMI_CONTROLLER_MAX_TRANS_BYTES	(16)
+#define SPMI_CONTROLLER_MAX_TRANS_BYTES		16
 
 /*
  * @base base address of the PMIC Arbiter core registers.
@@ -114,8 +114,10 @@ static int spmi_controller_wait_for_done(struct spmi_controller_dev *ctrl_dev,
 {
 	u32 status = 0;
 	u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
-	u32 offset = SPMI_APB_SPMI_STATUS_BASE_ADDR + SPMI_CHANNEL_OFFSET * ctrl_dev->channel
-		+ SPMI_SLAVE_OFFSET * sid;
+	u32 offset;
+
+	offset  = SPMI_APB_SPMI_STATUS_BASE_ADDR;
+	offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid;
 
 	while (timeout--) {
 		status = readl(base + offset);
-- 
2.26.2