From: Daniel Walker <dwalker@codeaurora.org> To: linux-arm-msm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, davidb@codeaurora.org, Daniel Walker <dwalker@codeaurora.org> Subject: [PATCH 5/7] msm: mahimahi: add in mmc support code Date: Thu, 20 Jan 2011 12:32:43 -0800 [thread overview] Message-ID: <1295555565-21563-6-git-send-email-dwalker@codeaurora.org> (raw) In-Reply-To: <1295555565-21563-1-git-send-email-dwalker@codeaurora.org> This adds code to enable MMC on mahimahi. This code was taken from Google's tree, with slight modifications and clean up. Signed-off-by: Daniel Walker <dwalker@codeaurora.org> --- arch/arm/mach-msm/Makefile | 1 + arch/arm/mach-msm/board-mahimahi-mmc.c | 206 ++++++++++++++++++++++++++++++++ 2 files changed, 207 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-msm/board-mahimahi-mmc.c diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index a0ebce4..5012c37 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o obj-$(CONFIG_MACH_MAHIMAHI) += board-mahimahi.o +obj-$(CONFIG_MACH_MAHIMAHI) += board-mahimahi-mmc.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o diff --git a/arch/arm/mach-msm/board-mahimahi-mmc.c b/arch/arm/mach-msm/board-mahimahi-mmc.c new file mode 100644 index 0000000..991818e --- /dev/null +++ b/arch/arm/mach-msm/board-mahimahi-mmc.c @@ -0,0 +1,206 @@ +/* linux/arch/arm/mach-msm/board-mahimahi-mmc.c + * + * Copyright (C) 2009 Google, Inc. + * Copyright (C) 2009 HTC Corporation + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include <linux/delay.h> +#include <linux/debugfs.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sdio_ids.h> +#include <linux/platform_device.h> + +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <mach/mmc.h> + +#include <mach/vreg.h> + +#include "board-mahimahi.h" +#include "devices.h" +#include "proc_comm.h" + +static bool opt_disable_sdcard; +static int __init mahimahi_disablesdcard_setup(char *str) +{ + opt_disable_sdcard = (bool)simple_strtol(str, NULL, 0); + return 1; +} + +__setup("board_mahimahi.disable_sdcard=", mahimahi_disablesdcard_setup); + +static struct msm_mmc_gpio sdc1_gpio_cfg[] = { + {62, "sdc1_clk"}, + {63, "sdc1_cmd"}, + {64, "sdc1_dat_3"}, + {65, "sdc1_dat_2"}, + {66, "sdc1_dat_1"}, + {67, "sdc1_dat_0"}, +}; + +static struct vreg *sdslot_vreg; +static uint32_t sdslot_vdd = 0xffffffff; +static uint32_t sdslot_vreg_enabled; + +static struct { + int mask; + int level; +} mmc_vdd_table[] = { + { MMC_VDD_165_195, 1800 }, + { MMC_VDD_20_21, 2050 }, + { MMC_VDD_21_22, 2150 }, + { MMC_VDD_22_23, 2250 }, + { MMC_VDD_23_24, 2350 }, + { MMC_VDD_24_25, 2450 }, + { MMC_VDD_25_26, 2550 }, + { MMC_VDD_26_27, 2650 }, + { MMC_VDD_27_28, 2750 }, + { MMC_VDD_28_29, 2850 }, + { MMC_VDD_29_30, 2950 }, +}; + +static uint32_t mahimahi_sdslot_switchvdd(struct device *dev, unsigned int vdd) +{ + int i; + int ret; + + if (vdd == sdslot_vdd) + return 0; + + sdslot_vdd = vdd; + + if (vdd == 0) { + vreg_disable(sdslot_vreg); + sdslot_vreg_enabled = 0; + return 0; + } + + if (!sdslot_vreg_enabled) { + ret = vreg_enable(sdslot_vreg); + if (ret) + pr_err("Error enabling vreg (%d)\n", ret); + sdslot_vreg_enabled = 1; + } + + for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) { + if (mmc_vdd_table[i].mask != (1 << vdd)) + continue; + ret = vreg_set_level(sdslot_vreg, mmc_vdd_table[i].level); + if (ret) + pr_err("Error setting level (%d)\n", ret); + return 0; + } + + pr_err("Invalid VDD (%d) specified\n", vdd); + return 0; +} + +static uint32_t +mahimahi_cdma_sdslot_switchvdd(struct device *dev, unsigned int vdd) +{ + if (!vdd == !sdslot_vdd) + return 0; + + /* In CDMA version, the vdd of sdslot is not configurable, and it is + * fixed in 2.85V by hardware design. + */ + + sdslot_vdd = vdd ? MMC_VDD_28_29 : 0; + + if (vdd) + gpio_set_value(MAHIMAHI_CDMA_SD_2V85_EN, 1); + else + gpio_set_value(MAHIMAHI_CDMA_SD_2V85_EN, 0); + + sdslot_vreg_enabled = !!vdd; + + return 0; +} + +static unsigned int mahimahi_sdslot_status_rev0(struct device *dev) +{ + return !gpio_get_value(MAHIMAHI_GPIO_SDMC_CD_REV0_N); +} + +#define MAHIMAHI_MMC_VDD (MMC_VDD_165_195 | MMC_VDD_20_21 | \ + MMC_VDD_21_22 | MMC_VDD_22_23 | \ + MMC_VDD_23_24 | MMC_VDD_24_25 | \ + MMC_VDD_25_26 | MMC_VDD_26_27 | \ + MMC_VDD_27_28 | MMC_VDD_28_29 | \ + MMC_VDD_29_30) + +static struct msm_mmc_gpio_data sdc1_gpio = + .gpio = sdc1_gpio_cfg, + .size = ARRAY_SIZE(sdc1_gpio_cfg), +}; + +static struct msm_mmc_platform_data mahimahi_sdslot_data = { + .ocr_mask = MAHIMAHI_MMC_VDD, + .translate_vdd = mahimahi_sdslot_switchvdd, + .gpio_data = &sdc1_gpio, +}; + +int msm_add_sdcc(unsigned int controller, struct msm_mmc_platform_data *plat, + unsigned int stat_irq, unsigned long stat_irq_flags); + +int __init mahimahi_init_mmc(unsigned int sys_rev, unsigned debug_uart) +{ + uint32_t id; + + if (debug_uart) { + pr_info("%s: sdcard disabled due to debug uart\n", __func__); + goto done; + } + if (opt_disable_sdcard) { + pr_info("%s: sdcard disabled on cmdline\n", __func__); + goto done; + } + + sdslot_vreg_enabled = 0; + + if (is_cdma_version(sys_rev)) { + /* In the CDMA version, sdslot is supplied by a gpio. */ + int rc = gpio_request(MAHIMAHI_CDMA_SD_2V85_EN, "sdslot_en"); + if (rc < 0) { + pr_err("%s: gpio_request(%d) failed: %d\n", __func__, + MAHIMAHI_CDMA_SD_2V85_EN, rc); + return rc; + } + mahimahi_sdslot_data.translate_vdd = mahimahi_cdma_sdslot_switchvdd; + } else { + /* in UMTS version, sdslot is supplied by pmic */ + sdslot_vreg = vreg_get(0, "gp6"); + if (IS_ERR(sdslot_vreg)) + return PTR_ERR(sdslot_vreg); + } + + if (system_rev > 0) + msm_add_sdcc(2, &mahimahi_sdslot_data, 0, 0); + else { + mahimahi_sdslot_data.status = mahimahi_sdslot_status_rev0; + mahimahi_sdslot_data.register_status_notify = NULL; + set_irq_wake(MSM_GPIO_TO_INT(MAHIMAHI_GPIO_SDMC_CD_REV0_N), 1); + msm_add_sdcc(2, &mahimahi_sdslot_data, + MSM_GPIO_TO_INT(MAHIMAHI_GPIO_SDMC_CD_REV0_N), + IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE); + } + +done: + return 0; +} -- 1.7.0.4 -- Sent by a consultant of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
WARNING: multiple messages have this Message-ID (diff)
From: dwalker@codeaurora.org (Daniel Walker) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/7] msm: mahimahi: add in mmc support code Date: Thu, 20 Jan 2011 12:32:43 -0800 [thread overview] Message-ID: <1295555565-21563-6-git-send-email-dwalker@codeaurora.org> (raw) In-Reply-To: <1295555565-21563-1-git-send-email-dwalker@codeaurora.org> This adds code to enable MMC on mahimahi. This code was taken from Google's tree, with slight modifications and clean up. Signed-off-by: Daniel Walker <dwalker@codeaurora.org> --- arch/arm/mach-msm/Makefile | 1 + arch/arm/mach-msm/board-mahimahi-mmc.c | 206 ++++++++++++++++++++++++++++++++ 2 files changed, 207 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-msm/board-mahimahi-mmc.c diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index a0ebce4..5012c37 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o obj-$(CONFIG_MACH_MAHIMAHI) += board-mahimahi.o +obj-$(CONFIG_MACH_MAHIMAHI) += board-mahimahi-mmc.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o diff --git a/arch/arm/mach-msm/board-mahimahi-mmc.c b/arch/arm/mach-msm/board-mahimahi-mmc.c new file mode 100644 index 0000000..991818e --- /dev/null +++ b/arch/arm/mach-msm/board-mahimahi-mmc.c @@ -0,0 +1,206 @@ +/* linux/arch/arm/mach-msm/board-mahimahi-mmc.c + * + * Copyright (C) 2009 Google, Inc. + * Copyright (C) 2009 HTC Corporation + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include <linux/delay.h> +#include <linux/debugfs.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sdio_ids.h> +#include <linux/platform_device.h> + +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <mach/mmc.h> + +#include <mach/vreg.h> + +#include "board-mahimahi.h" +#include "devices.h" +#include "proc_comm.h" + +static bool opt_disable_sdcard; +static int __init mahimahi_disablesdcard_setup(char *str) +{ + opt_disable_sdcard = (bool)simple_strtol(str, NULL, 0); + return 1; +} + +__setup("board_mahimahi.disable_sdcard=", mahimahi_disablesdcard_setup); + +static struct msm_mmc_gpio sdc1_gpio_cfg[] = { + {62, "sdc1_clk"}, + {63, "sdc1_cmd"}, + {64, "sdc1_dat_3"}, + {65, "sdc1_dat_2"}, + {66, "sdc1_dat_1"}, + {67, "sdc1_dat_0"}, +}; + +static struct vreg *sdslot_vreg; +static uint32_t sdslot_vdd = 0xffffffff; +static uint32_t sdslot_vreg_enabled; + +static struct { + int mask; + int level; +} mmc_vdd_table[] = { + { MMC_VDD_165_195, 1800 }, + { MMC_VDD_20_21, 2050 }, + { MMC_VDD_21_22, 2150 }, + { MMC_VDD_22_23, 2250 }, + { MMC_VDD_23_24, 2350 }, + { MMC_VDD_24_25, 2450 }, + { MMC_VDD_25_26, 2550 }, + { MMC_VDD_26_27, 2650 }, + { MMC_VDD_27_28, 2750 }, + { MMC_VDD_28_29, 2850 }, + { MMC_VDD_29_30, 2950 }, +}; + +static uint32_t mahimahi_sdslot_switchvdd(struct device *dev, unsigned int vdd) +{ + int i; + int ret; + + if (vdd == sdslot_vdd) + return 0; + + sdslot_vdd = vdd; + + if (vdd == 0) { + vreg_disable(sdslot_vreg); + sdslot_vreg_enabled = 0; + return 0; + } + + if (!sdslot_vreg_enabled) { + ret = vreg_enable(sdslot_vreg); + if (ret) + pr_err("Error enabling vreg (%d)\n", ret); + sdslot_vreg_enabled = 1; + } + + for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) { + if (mmc_vdd_table[i].mask != (1 << vdd)) + continue; + ret = vreg_set_level(sdslot_vreg, mmc_vdd_table[i].level); + if (ret) + pr_err("Error setting level (%d)\n", ret); + return 0; + } + + pr_err("Invalid VDD (%d) specified\n", vdd); + return 0; +} + +static uint32_t +mahimahi_cdma_sdslot_switchvdd(struct device *dev, unsigned int vdd) +{ + if (!vdd == !sdslot_vdd) + return 0; + + /* In CDMA version, the vdd of sdslot is not configurable, and it is + * fixed in 2.85V by hardware design. + */ + + sdslot_vdd = vdd ? MMC_VDD_28_29 : 0; + + if (vdd) + gpio_set_value(MAHIMAHI_CDMA_SD_2V85_EN, 1); + else + gpio_set_value(MAHIMAHI_CDMA_SD_2V85_EN, 0); + + sdslot_vreg_enabled = !!vdd; + + return 0; +} + +static unsigned int mahimahi_sdslot_status_rev0(struct device *dev) +{ + return !gpio_get_value(MAHIMAHI_GPIO_SDMC_CD_REV0_N); +} + +#define MAHIMAHI_MMC_VDD (MMC_VDD_165_195 | MMC_VDD_20_21 | \ + MMC_VDD_21_22 | MMC_VDD_22_23 | \ + MMC_VDD_23_24 | MMC_VDD_24_25 | \ + MMC_VDD_25_26 | MMC_VDD_26_27 | \ + MMC_VDD_27_28 | MMC_VDD_28_29 | \ + MMC_VDD_29_30) + +static struct msm_mmc_gpio_data sdc1_gpio = + .gpio = sdc1_gpio_cfg, + .size = ARRAY_SIZE(sdc1_gpio_cfg), +}; + +static struct msm_mmc_platform_data mahimahi_sdslot_data = { + .ocr_mask = MAHIMAHI_MMC_VDD, + .translate_vdd = mahimahi_sdslot_switchvdd, + .gpio_data = &sdc1_gpio, +}; + +int msm_add_sdcc(unsigned int controller, struct msm_mmc_platform_data *plat, + unsigned int stat_irq, unsigned long stat_irq_flags); + +int __init mahimahi_init_mmc(unsigned int sys_rev, unsigned debug_uart) +{ + uint32_t id; + + if (debug_uart) { + pr_info("%s: sdcard disabled due to debug uart\n", __func__); + goto done; + } + if (opt_disable_sdcard) { + pr_info("%s: sdcard disabled on cmdline\n", __func__); + goto done; + } + + sdslot_vreg_enabled = 0; + + if (is_cdma_version(sys_rev)) { + /* In the CDMA version, sdslot is supplied by a gpio. */ + int rc = gpio_request(MAHIMAHI_CDMA_SD_2V85_EN, "sdslot_en"); + if (rc < 0) { + pr_err("%s: gpio_request(%d) failed: %d\n", __func__, + MAHIMAHI_CDMA_SD_2V85_EN, rc); + return rc; + } + mahimahi_sdslot_data.translate_vdd = mahimahi_cdma_sdslot_switchvdd; + } else { + /* in UMTS version, sdslot is supplied by pmic */ + sdslot_vreg = vreg_get(0, "gp6"); + if (IS_ERR(sdslot_vreg)) + return PTR_ERR(sdslot_vreg); + } + + if (system_rev > 0) + msm_add_sdcc(2, &mahimahi_sdslot_data, 0, 0); + else { + mahimahi_sdslot_data.status = mahimahi_sdslot_status_rev0; + mahimahi_sdslot_data.register_status_notify = NULL; + set_irq_wake(MSM_GPIO_TO_INT(MAHIMAHI_GPIO_SDMC_CD_REV0_N), 1); + msm_add_sdcc(2, &mahimahi_sdslot_data, + MSM_GPIO_TO_INT(MAHIMAHI_GPIO_SDMC_CD_REV0_N), + IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE); + } + +done: + return 0; +} -- 1.7.0.4 -- Sent by a consultant of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-01-20 20:32 UTC|newest] Thread overview: 157+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-01-20 20:32 [PATCH 0/7] Nexus One Support Daniel Walker 2011-01-20 20:32 ` Daniel Walker 2011-01-20 20:32 ` [PATCH 1/7] msm: qsd8x50: add uart platform data Daniel Walker 2011-01-20 20:32 ` Daniel Walker 2011-01-20 20:32 ` [PATCH 2/7] [ARM] msm: qsd8k memory base is at 0x20000000 Daniel Walker 2011-01-20 20:32 ` Daniel Walker 2011-01-20 20:32 ` [PATCH 3/7] msm: qsd8x50: add acpuclock code Daniel Walker 2011-01-20 20:32 ` Daniel Walker 2011-01-20 20:32 ` [PATCH 4/7] msm: mahimahi: add mahimahi board file Daniel Walker 2011-01-20 20:32 ` Daniel Walker 2011-01-20 20:32 ` Daniel Walker [this message] 2011-01-20 20:32 ` [PATCH 5/7] msm: mahimahi: add in mmc support code Daniel Walker 2011-01-20 20:32 ` [PATCH 6/7] msm: mahimahi: add gpio pin muxing code Daniel Walker 2011-01-20 20:32 ` Daniel Walker 2011-01-20 20:32 ` [PATCH 7/7] msm: mahimahi: initialize mmc at start up Daniel Walker 2011-01-20 20:32 ` Daniel Walker 2011-01-21 0:42 ` [PATCH 0/7] Nexus One Support Dima Zavin 2011-01-21 0:42 ` Dima Zavin 2011-01-21 0:42 ` Dima Zavin 2011-01-21 0:55 ` Daniel Walker 2011-01-21 0:55 ` Daniel Walker 2011-01-21 1:41 ` Joe Perches 2011-01-21 1:41 ` Joe Perches 2011-01-21 1:58 ` Daniel Walker 2011-01-21 1:58 ` Daniel Walker 2011-01-21 2:13 ` Dima Zavin 2011-01-21 2:13 ` Dima Zavin 2011-01-21 15:47 ` Daniel Walker 2011-01-21 15:47 ` Daniel Walker 2011-01-21 2:25 ` Joe Perches 2011-01-21 2:25 ` Joe Perches 2011-01-21 3:41 ` Theodore Tso 2011-01-21 3:41 ` Theodore Tso 2011-01-21 15:46 ` Daniel Walker 2011-01-21 15:46 ` Daniel Walker 2011-01-21 17:48 ` Jesse Barnes 2011-01-21 17:48 ` Jesse Barnes 2011-01-21 17:56 ` Daniel Walker 2011-01-21 17:56 ` Daniel Walker 2011-01-21 17:59 ` Christoph Hellwig 2011-01-21 17:59 ` Christoph Hellwig 2011-01-21 17:56 ` Jesse Barnes 2011-01-21 17:56 ` Jesse Barnes 2011-01-21 17:56 ` Jesse Barnes 2011-01-21 18:00 ` Daniel Walker 2011-01-21 18:00 ` Daniel Walker 2011-01-21 18:04 ` Jesse Barnes 2011-01-21 18:04 ` Jesse Barnes 2011-01-21 18:18 ` Daniel Walker 2011-01-21 18:18 ` Daniel Walker 2011-01-21 18:27 ` Jesse Barnes 2011-01-21 18:27 ` Jesse Barnes 2011-01-21 18:35 ` Daniel Walker 2011-01-21 18:35 ` Daniel Walker 2011-01-21 20:44 ` Dima Zavin 2011-01-21 20:44 ` Dima Zavin 2011-01-21 20:49 ` Daniel Walker 2011-01-21 20:49 ` Daniel Walker 2011-01-21 20:49 ` Daniel Walker 2011-01-21 21:01 ` Jesse Barnes 2011-01-21 21:01 ` Jesse Barnes 2011-01-21 21:01 ` Jesse Barnes 2011-01-21 21:26 ` Daniel Walker 2011-01-21 21:26 ` Daniel Walker 2011-01-21 21:42 ` Dima Zavin 2011-01-21 21:42 ` Dima Zavin 2011-01-21 21:42 ` Dima Zavin 2011-01-22 13:58 ` David Woodhouse 2011-01-22 13:58 ` David Woodhouse 2011-01-21 21:02 ` Joe Perches 2011-01-21 21:02 ` Joe Perches 2011-01-21 21:02 ` Joe Perches 2011-01-21 21:24 ` Daniel Walker 2011-01-21 21:24 ` Daniel Walker 2011-01-21 21:24 ` Daniel Walker 2011-01-22 11:18 ` Pekka Enberg 2011-01-22 11:18 ` Pekka Enberg 2011-01-22 11:18 ` Pekka Enberg 2011-01-22 12:20 ` Russell King - ARM Linux 2011-01-22 12:20 ` Russell King - ARM Linux 2011-01-22 18:06 ` Dima Zavin 2011-01-22 18:06 ` Dima Zavin 2011-01-22 18:06 ` Dima Zavin 2011-01-22 18:49 ` Russell King - ARM Linux 2011-01-22 18:49 ` Russell King - ARM Linux 2011-01-22 18:49 ` Russell King - ARM Linux 2011-01-22 20:50 ` Christoph Hellwig 2011-01-22 20:50 ` Christoph Hellwig 2011-01-22 19:22 ` Brian Swetland 2011-01-22 19:22 ` Brian Swetland 2011-01-22 19:49 ` Nicolas Pitre 2011-01-22 19:49 ` Nicolas Pitre 2011-01-22 19:59 ` Brian Swetland 2011-01-22 19:59 ` Brian Swetland 2011-01-22 19:59 ` Brian Swetland 2011-01-22 20:53 ` Christoph Hellwig 2011-01-22 20:53 ` Christoph Hellwig 2011-01-22 21:04 ` Russell King - ARM Linux 2011-01-22 21:04 ` Russell King - ARM Linux 2011-01-22 21:57 ` Alan Cox 2011-01-22 21:57 ` Alan Cox 2011-01-23 2:38 ` David Woodhouse 2011-01-23 2:38 ` David Woodhouse 2011-01-22 20:41 ` Christoph Hellwig 2011-01-22 20:41 ` Christoph Hellwig 2011-01-21 21:05 ` Pekka Enberg 2011-01-21 21:05 ` Pekka Enberg 2011-01-21 21:05 ` Pekka Enberg 2011-01-21 21:17 ` Joe Perches 2011-01-21 21:17 ` Joe Perches 2011-01-21 23:49 ` Ted Ts'o 2011-01-21 23:49 ` Ted Ts'o 2011-01-22 0:03 ` Daniel Walker 2011-01-22 0:03 ` Daniel Walker 2011-01-22 1:58 ` Steven Rostedt 2011-01-22 1:58 ` Steven Rostedt 2011-01-22 2:13 ` Daniel Walker 2011-01-22 2:13 ` Daniel Walker 2011-01-22 2:32 ` Steven Rostedt 2011-01-22 2:32 ` Steven Rostedt 2011-01-22 2:31 ` Ted Ts'o 2011-01-22 2:31 ` Ted Ts'o 2011-01-22 8:19 ` Pekka Enberg 2011-01-22 8:19 ` Pekka Enberg 2011-01-22 10:35 ` Dima Zavin 2011-01-22 10:35 ` Dima Zavin 2011-01-22 10:35 ` Dima Zavin 2011-01-22 10:45 ` Anca Emanuel 2011-01-22 10:45 ` Anca Emanuel 2011-01-22 10:45 ` Anca Emanuel 2011-01-22 11:03 ` Pekka Enberg 2011-01-22 11:03 ` Pekka Enberg 2011-01-22 11:15 ` Pekka Enberg 2011-01-22 11:15 ` Pekka Enberg 2011-01-22 17:28 ` Thomas Gleixner 2011-01-22 17:28 ` Thomas Gleixner 2011-01-22 18:07 ` Denis 'GNUtoo' Carikli 2011-01-22 18:07 ` Denis 'GNUtoo' Carikli 2011-01-22 18:07 ` Denis 'GNUtoo' Carikli 2011-01-22 18:15 ` Dima Zavin 2011-01-22 18:15 ` Dima Zavin 2011-01-22 18:15 ` Dima Zavin 2011-01-22 20:55 ` Christoph Hellwig 2011-01-22 20:55 ` Christoph Hellwig 2011-01-22 21:56 ` Pekka Enberg 2011-01-22 21:56 ` Pekka Enberg 2011-01-22 21:56 ` Pekka Enberg 2011-01-22 21:58 ` Christoph Hellwig 2011-01-22 21:58 ` Christoph Hellwig 2011-01-22 22:13 ` Pekka Enberg 2011-01-22 22:13 ` Pekka Enberg 2011-01-22 22:13 ` Pekka Enberg 2011-02-04 13:36 ` Pavel Machek 2011-02-04 13:36 ` Pavel Machek 2011-02-07 17:36 ` Daniel Walker 2011-02-07 17:36 ` Daniel Walker 2011-02-07 17:36 ` Daniel Walker
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1295555565-21563-6-git-send-email-dwalker@codeaurora.org \ --to=dwalker@codeaurora.org \ --cc=davidb@codeaurora.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.