From: Kent Yoder <key@linux.vnet.ibm.com> To: linux-kernel@vger.kernel.org Cc: linux-crypto@vger.kernel.org, rcj@linux.vnet.ibm.com, key@linux.vnet.ibm.com, benh@kernel.crashing.org, linuxppc-dev@lists.ozlabs.org Subject: [PATCH v3 00/17] Platform Facilities Option and crypto accelerators Date: Thu, 12 Apr 2012 10:00:25 -0500 [thread overview] Message-ID: <1334242825.18090.4.camel@key-ThinkPad-W510> (raw) This patch series adds support for a new device type, the Platform Facilities Option (PFO). PFO resources are a set of accelerators that share some system resources managed by the VIO bus. This patchset includes the basic support for the devices in the VIO bus code along with drivers for the random number generator and the cryptographic accelerators. Thanks, Kent ChangeLog for v3: - reorder patches putting nx driver first (Dave Miller) ChangeLog for v2: - move crypto driver sysfs stuff to debugfs (Greg K-H) - Remove CONFIG_ dependencies for the CMO bits (Anton Blanchard) - move nx driver code to drivers/crypto (Kumar Gala) - Add inline comment for nx_build_sg_list (Rob Jennings) - make sure kmalloc'd pointers are aligned (Rob Jennings) - get rid of bitfields in nx_csbcpb.h (Rob Jennings) - Compile against Ben Herrenschmidt's ppc device naming patch - Rebase against latest upstream Kent Yoder (12): powerpc: crypto: nx driver code supporting nx encryption powerpc: crypto: AES-CBC mode routines for nx encryption powerpc: crypto: AES-CCM mode routines for nx encryption powerpc: crypto: AES-CTR mode routines for nx encryption powerpc: crypto: AES-ECB mode routines for nx encryption powerpc: crypto: AES-GCM mode routines for nx encryption powerpc: crypto: AES-XCBC mode routines for nx encryption powerpc: crypto: SHA256 hash routines for nx encryption powerpc: crypto: SHA512 hash routines for nx encryption powerpc: crypto: debugfs routines and docs for the nx device driver powerpc: crypto: Build files for the nx device driver powerpc: crypto: enable the PFO-based encryption device Michael Neuling (1): hwrng: pseries - PFO-based hwrng driver Robert Jennings (4): powerpc: Add new hvcall constants to support PFO powerpc: Add pseries update notifier for OFDT prop changes powerpc: Add PFO support to the VIO bus pseries: Enabled the PFO-based RNG accelerator Documentation/ABI/testing/debugfs-pfo-nx-crypto | 45 ++ arch/powerpc/Makefile | 1 + arch/powerpc/include/asm/hvcall.h | 25 +- arch/powerpc/include/asm/pSeries_reconfig.h | 12 + arch/powerpc/include/asm/vio.h | 46 ++ arch/powerpc/kernel/prom_init.c | 9 +- arch/powerpc/kernel/vio.c | 273 ++++++++-- arch/powerpc/platforms/pseries/reconfig.c | 7 + drivers/char/hw_random/Kconfig | 13 + drivers/char/hw_random/Makefile | 1 + drivers/char/hw_random/pseries-rng.c | 96 +++ drivers/crypto/Kconfig | 17 + drivers/crypto/nx/Makefile | 11 + drivers/crypto/nx/nx-aes-cbc.c | 140 +++++ drivers/crypto/nx/nx-aes-ccm.c | 465 +++++++++++++++ drivers/crypto/nx/nx-aes-ctr.c | 177 ++++++ drivers/crypto/nx/nx-aes-ecb.c | 138 +++++ drivers/crypto/nx/nx-aes-gcm.c | 353 +++++++++++ drivers/crypto/nx/nx-aes-xcbc.c | 234 ++++++++ drivers/crypto/nx/nx-sha256.c | 244 ++++++++ drivers/crypto/nx/nx-sha512.c | 263 +++++++++ drivers/crypto/nx/nx.c | 711 +++++++++++++++++++++++ drivers/crypto/nx/nx.h | 192 ++++++ drivers/crypto/nx/nx_csbcpb.h | 205 +++++++ drivers/crypto/nx/nx_debugfs.c | 103 ++++ 25 files changed, 3739 insertions(+), 42 deletions(-) create mode 100644 Documentation/ABI/testing/debugfs-pfo-nx-crypto create mode 100644 drivers/char/hw_random/pseries-rng.c create mode 100644 drivers/crypto/nx/Makefile create mode 100644 drivers/crypto/nx/nx-aes-cbc.c create mode 100644 drivers/crypto/nx/nx-aes-ccm.c create mode 100644 drivers/crypto/nx/nx-aes-ctr.c create mode 100644 drivers/crypto/nx/nx-aes-ecb.c create mode 100644 drivers/crypto/nx/nx-aes-gcm.c create mode 100644 drivers/crypto/nx/nx-aes-xcbc.c create mode 100644 drivers/crypto/nx/nx-sha256.c create mode 100644 drivers/crypto/nx/nx-sha512.c create mode 100644 drivers/crypto/nx/nx.c create mode 100644 drivers/crypto/nx/nx.h create mode 100644 drivers/crypto/nx/nx_csbcpb.h create mode 100644 drivers/crypto/nx/nx_debugfs.c
WARNING: multiple messages have this Message-ID (diff)
From: Kent Yoder <key@linux.vnet.ibm.com> To: linux-kernel@vger.kernel.org Cc: key@linux.vnet.ibm.com, rcj@linux.vnet.ibm.com, linuxppc-dev@lists.ozlabs.org, linux-crypto@vger.kernel.org Subject: [PATCH v3 00/17] Platform Facilities Option and crypto accelerators Date: Thu, 12 Apr 2012 10:00:25 -0500 [thread overview] Message-ID: <1334242825.18090.4.camel@key-ThinkPad-W510> (raw) This patch series adds support for a new device type, the Platform Facilities Option (PFO). PFO resources are a set of accelerators that share some system resources managed by the VIO bus. This patchset includes the basic support for the devices in the VIO bus code along with drivers for the random number generator and the cryptographic accelerators. Thanks, Kent ChangeLog for v3: - reorder patches putting nx driver first (Dave Miller) ChangeLog for v2: - move crypto driver sysfs stuff to debugfs (Greg K-H) - Remove CONFIG_ dependencies for the CMO bits (Anton Blanchard) - move nx driver code to drivers/crypto (Kumar Gala) - Add inline comment for nx_build_sg_list (Rob Jennings) - make sure kmalloc'd pointers are aligned (Rob Jennings) - get rid of bitfields in nx_csbcpb.h (Rob Jennings) - Compile against Ben Herrenschmidt's ppc device naming patch - Rebase against latest upstream Kent Yoder (12): powerpc: crypto: nx driver code supporting nx encryption powerpc: crypto: AES-CBC mode routines for nx encryption powerpc: crypto: AES-CCM mode routines for nx encryption powerpc: crypto: AES-CTR mode routines for nx encryption powerpc: crypto: AES-ECB mode routines for nx encryption powerpc: crypto: AES-GCM mode routines for nx encryption powerpc: crypto: AES-XCBC mode routines for nx encryption powerpc: crypto: SHA256 hash routines for nx encryption powerpc: crypto: SHA512 hash routines for nx encryption powerpc: crypto: debugfs routines and docs for the nx device driver powerpc: crypto: Build files for the nx device driver powerpc: crypto: enable the PFO-based encryption device Michael Neuling (1): hwrng: pseries - PFO-based hwrng driver Robert Jennings (4): powerpc: Add new hvcall constants to support PFO powerpc: Add pseries update notifier for OFDT prop changes powerpc: Add PFO support to the VIO bus pseries: Enabled the PFO-based RNG accelerator Documentation/ABI/testing/debugfs-pfo-nx-crypto | 45 ++ arch/powerpc/Makefile | 1 + arch/powerpc/include/asm/hvcall.h | 25 +- arch/powerpc/include/asm/pSeries_reconfig.h | 12 + arch/powerpc/include/asm/vio.h | 46 ++ arch/powerpc/kernel/prom_init.c | 9 +- arch/powerpc/kernel/vio.c | 273 ++++++++-- arch/powerpc/platforms/pseries/reconfig.c | 7 + drivers/char/hw_random/Kconfig | 13 + drivers/char/hw_random/Makefile | 1 + drivers/char/hw_random/pseries-rng.c | 96 +++ drivers/crypto/Kconfig | 17 + drivers/crypto/nx/Makefile | 11 + drivers/crypto/nx/nx-aes-cbc.c | 140 +++++ drivers/crypto/nx/nx-aes-ccm.c | 465 +++++++++++++++ drivers/crypto/nx/nx-aes-ctr.c | 177 ++++++ drivers/crypto/nx/nx-aes-ecb.c | 138 +++++ drivers/crypto/nx/nx-aes-gcm.c | 353 +++++++++++ drivers/crypto/nx/nx-aes-xcbc.c | 234 ++++++++ drivers/crypto/nx/nx-sha256.c | 244 ++++++++ drivers/crypto/nx/nx-sha512.c | 263 +++++++++ drivers/crypto/nx/nx.c | 711 +++++++++++++++++++++++ drivers/crypto/nx/nx.h | 192 ++++++ drivers/crypto/nx/nx_csbcpb.h | 205 +++++++ drivers/crypto/nx/nx_debugfs.c | 103 ++++ 25 files changed, 3739 insertions(+), 42 deletions(-) create mode 100644 Documentation/ABI/testing/debugfs-pfo-nx-crypto create mode 100644 drivers/char/hw_random/pseries-rng.c create mode 100644 drivers/crypto/nx/Makefile create mode 100644 drivers/crypto/nx/nx-aes-cbc.c create mode 100644 drivers/crypto/nx/nx-aes-ccm.c create mode 100644 drivers/crypto/nx/nx-aes-ctr.c create mode 100644 drivers/crypto/nx/nx-aes-ecb.c create mode 100644 drivers/crypto/nx/nx-aes-gcm.c create mode 100644 drivers/crypto/nx/nx-aes-xcbc.c create mode 100644 drivers/crypto/nx/nx-sha256.c create mode 100644 drivers/crypto/nx/nx-sha512.c create mode 100644 drivers/crypto/nx/nx.c create mode 100644 drivers/crypto/nx/nx.h create mode 100644 drivers/crypto/nx/nx_csbcpb.h create mode 100644 drivers/crypto/nx/nx_debugfs.c
next reply other threads:[~2012-04-12 14:59 UTC|newest] Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-04-12 15:00 Kent Yoder [this message] 2012-04-12 15:00 ` [PATCH v3 00/17] Platform Facilities Option and crypto accelerators Kent Yoder 2012-04-12 15:04 ` [PATCH v3 01/17] powerpc: Add new hvcall constants to support PFO Kent Yoder 2012-04-12 15:04 ` Kent Yoder 2012-04-12 15:04 ` [PATCH v3 02/17] powerpc: Add pseries update notifier for OFDT prop changes Kent Yoder 2012-04-12 15:04 ` Kent Yoder 2012-04-12 15:08 ` [PATCH v3 03/17] powerpc: Add PFO support to the VIO bus Kent Yoder 2012-04-12 15:08 ` Kent Yoder 2012-05-01 3:06 ` Benjamin Herrenschmidt 2012-05-01 3:06 ` Benjamin Herrenschmidt 2012-05-01 4:10 ` Benjamin Herrenschmidt 2012-05-01 4:10 ` Benjamin Herrenschmidt 2012-05-10 19:08 ` Robert Jennings 2012-05-10 19:08 ` Robert Jennings 2012-05-10 21:58 ` Benjamin Herrenschmidt 2012-05-10 21:58 ` Benjamin Herrenschmidt 2012-05-14 0:32 ` Benjamin Herrenschmidt 2012-05-14 0:32 ` Benjamin Herrenschmidt 2012-05-14 20:59 ` [PATCH v4 06/17] powerpc: crypto: nx driver code supporting nx encryption Kent Yoder 2012-05-14 20:59 ` Kent Yoder 2012-05-14 21:05 ` [PATCH v4 07/17] powerpc: crypto: AES-CBC mode routines for " Kent Yoder 2012-05-14 21:05 ` Kent Yoder 2012-05-14 21:05 ` [PATCH v4 08/17] powerpc: crypto: AES-CCM " Kent Yoder 2012-05-14 21:05 ` Kent Yoder 2012-05-14 21:05 ` [PATCH v4 09/17] powerpc: crypto: AES-CTR " Kent Yoder 2012-05-14 21:05 ` Kent Yoder 2012-05-14 21:05 ` [PATCH v4 10/17] powerpc: crypto: AES-ECB " Kent Yoder 2012-05-14 21:05 ` Kent Yoder 2012-05-14 21:05 ` [PATCH v4 11/17] powerpc: crypto: AES-GCM " Kent Yoder 2012-05-14 21:05 ` Kent Yoder 2012-05-14 21:06 ` [PATCH v4 12/17] powerpc: crypto: AES-XCBC " Kent Yoder 2012-05-14 21:06 ` Kent Yoder 2012-05-14 21:06 ` [PATCH v4 13/17] powerpc: crypto: SHA256 hash " Kent Yoder 2012-05-14 21:06 ` Kent Yoder 2012-05-14 21:06 ` [PATCH v4 14/17] powerpc: crypto: SHA512 " Kent Yoder 2012-05-14 21:06 ` Kent Yoder 2012-04-12 15:08 ` [PATCH v3 04/17] hwrng: pseries - PFO-based hwrng driver Kent Yoder 2012-04-12 15:08 ` Kent Yoder 2012-04-12 15:17 ` [PATCH v3 05/17] pseries: Enabled the PFO-based RNG accelerator Kent Yoder 2012-04-12 15:17 ` Kent Yoder 2012-04-12 15:23 ` [PATCH v3 06/17] powerpc: crypto: nx driver code supporting nx encryption Kent Yoder 2012-04-12 15:23 ` Kent Yoder 2012-04-12 15:24 ` [PATCH v3 07/17] powerpc: crypto: AES-CBC mode routines for " Kent Yoder 2012-04-12 15:24 ` Kent Yoder 2012-04-12 15:28 ` [PATCH v3 08/17] powerpc: crypto: AES-CCM " Kent Yoder 2012-04-12 15:28 ` Kent Yoder 2012-04-12 15:31 ` [PATCH v3 09/17] powerpc: crypto: AES-CTR " Kent Yoder 2012-04-12 15:31 ` Kent Yoder 2012-04-12 15:31 ` [PATCH v3 10/17] powerpc: crypto: AES-ECB " Kent Yoder 2012-04-12 15:31 ` Kent Yoder 2012-04-12 15:33 ` [PATCH v3 11/17] powerpc: crypto: AES-GCM " Kent Yoder 2012-04-12 15:33 ` Kent Yoder 2012-04-12 15:38 ` [PATCH v3 12/17] powerpc: crypto: AES-XCBC " Kent Yoder 2012-04-12 15:38 ` Kent Yoder 2012-04-12 15:38 ` [PATCH v3 13/17] powerpc: crypto: SHA256 hash " Kent Yoder 2012-04-12 15:38 ` Kent Yoder 2012-04-12 15:38 ` [PATCH v3 14/17] powerpc: crypto: SHA512 " Kent Yoder 2012-04-12 15:38 ` Kent Yoder 2012-04-12 15:38 ` [PATCH v3 15/17] powerpc: crypto: debugfs routines and docs for the nx device driver Kent Yoder 2012-04-12 15:38 ` Kent Yoder 2012-04-12 15:39 ` [PATCH v3 16/17] powerpc: crypto: Build files " Kent Yoder 2012-04-12 15:39 ` Kent Yoder 2012-04-12 15:39 ` [PATCH v3 17/17] powerpc: crypto: enable the PFO-based encryption device Kent Yoder 2012-04-12 15:39 ` Kent Yoder
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1334242825.18090.4.camel@key-ThinkPad-W510 \ --to=key@linux.vnet.ibm.com \ --cc=benh@kernel.crashing.org \ --cc=linux-crypto@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=rcj@linux.vnet.ibm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.