From: Zhang Rui <rui.zhang@intel.com> To: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net>, linux ARM <linux-arm-kernel@lists.infradead.org>, linux-pm@vger.kernel.org, Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Subject: Re: [PATCH v3 2/4] ARM: Kirkwood: Add support thermal sensor for 88F6282 and 88F6283 Date: Mon, 04 Feb 2013 11:14:53 +0800 [thread overview] Message-ID: <1359947693.2250.50.camel@rzhang1-mobl4> (raw) In-Reply-To: <1359815749-27705-3-git-send-email-andrew@lunn.ch> On Sat, 2013-02-02 at 15:35 +0100, Andrew Lunn wrote: > From: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> > > Kirkwood 88F6282 and 88F6283 have a thermal sensor. > This patch adds a DT node and enables the driver in the kernel config. > > Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> > Signed-off-by: Andrew Lunn <andrew@lunn.ch> I can take this one but I need ACK from ARM experts first. thanks, rui > --- > arch/arm/boot/dts/kirkwood-6282.dtsi | 6 ++++++ > arch/arm/configs/kirkwood_defconfig | 2 ++ > 2 files changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi > index 4ccea21..bd168b6 100644 > --- a/arch/arm/boot/dts/kirkwood-6282.dtsi > +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi > @@ -32,6 +32,12 @@ > }; > }; > > + thermal@10078 { > + compatible = "marvell,kirkwood-thermal"; > + reg = <0x10078 0x4>; > + status = "okay"; > + }; > + > i2c@11100 { > compatible = "marvell,mv64xxx-i2c"; > reg = <0x11100 0x20>; > diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig > index 93f3794..3d8667f 100644 > --- a/arch/arm/configs/kirkwood_defconfig > +++ b/arch/arm/configs/kirkwood_defconfig > @@ -118,6 +118,8 @@ CONFIG_SPI=y > CONFIG_SPI_ORION=y > CONFIG_GPIO_SYSFS=y > # CONFIG_HWMON is not set > +CONFIG_THERMAL=y > +CONFIG_KIRKWOOD_THERMAL=y > CONFIG_WATCHDOG=y > CONFIG_ORION_WATCHDOG=y > CONFIG_HID_DRAGONRISE=y
WARNING: multiple messages have this Message-ID (diff)
From: rui.zhang@intel.com (Zhang Rui) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 2/4] ARM: Kirkwood: Add support thermal sensor for 88F6282 and 88F6283 Date: Mon, 04 Feb 2013 11:14:53 +0800 [thread overview] Message-ID: <1359947693.2250.50.camel@rzhang1-mobl4> (raw) In-Reply-To: <1359815749-27705-3-git-send-email-andrew@lunn.ch> On Sat, 2013-02-02 at 15:35 +0100, Andrew Lunn wrote: > From: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> > > Kirkwood 88F6282 and 88F6283 have a thermal sensor. > This patch adds a DT node and enables the driver in the kernel config. > > Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> > Signed-off-by: Andrew Lunn <andrew@lunn.ch> I can take this one but I need ACK from ARM experts first. thanks, rui > --- > arch/arm/boot/dts/kirkwood-6282.dtsi | 6 ++++++ > arch/arm/configs/kirkwood_defconfig | 2 ++ > 2 files changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi > index 4ccea21..bd168b6 100644 > --- a/arch/arm/boot/dts/kirkwood-6282.dtsi > +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi > @@ -32,6 +32,12 @@ > }; > }; > > + thermal at 10078 { > + compatible = "marvell,kirkwood-thermal"; > + reg = <0x10078 0x4>; > + status = "okay"; > + }; > + > i2c at 11100 { > compatible = "marvell,mv64xxx-i2c"; > reg = <0x11100 0x20>; > diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig > index 93f3794..3d8667f 100644 > --- a/arch/arm/configs/kirkwood_defconfig > +++ b/arch/arm/configs/kirkwood_defconfig > @@ -118,6 +118,8 @@ CONFIG_SPI=y > CONFIG_SPI_ORION=y > CONFIG_GPIO_SYSFS=y > # CONFIG_HWMON is not set > +CONFIG_THERMAL=y > +CONFIG_KIRKWOOD_THERMAL=y > CONFIG_WATCHDOG=y > CONFIG_ORION_WATCHDOG=y > CONFIG_HID_DRAGONRISE=y
next prev parent reply other threads:[~2013-02-04 3:14 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-02-02 14:35 [PATCH v3 0/4] Kirkwood and Dove Thermal drivers Andrew Lunn 2013-02-02 14:35 ` Andrew Lunn 2013-02-02 14:35 ` [PATCH v3 1/4] thermal: Add support for the thermal sensor on Kirkwood SoCs Andrew Lunn 2013-02-02 14:35 ` Andrew Lunn 2013-02-04 2:49 ` Zhang Rui 2013-02-04 2:49 ` Zhang Rui 2013-02-04 19:19 ` [PATCH v4 0/4] Kirkwood and Dove Thermal drivers Andrew Lunn 2013-02-04 19:19 ` Andrew Lunn 2013-02-04 19:19 ` [PATCH v4 1/4] thermal: Add support for the thermal sensor on Kirkwood SoCs Andrew Lunn 2013-02-04 19:19 ` Andrew Lunn 2013-02-05 17:10 ` Ezequiel Garcia 2013-02-05 17:10 ` Ezequiel Garcia 2013-02-04 19:19 ` [PATCH v4 2/4] ARM: Kirkwood: Add support thermal sensor for 88F6282 and 88F6283 Andrew Lunn 2013-02-04 19:19 ` Andrew Lunn 2013-02-04 19:19 ` [PATCH v4 3/4] Thermal: Dove: Add Themal sensor support for Dove Andrew Lunn 2013-02-04 19:19 ` Andrew Lunn 2013-02-05 17:09 ` Ezequiel Garcia 2013-02-05 17:09 ` Ezequiel Garcia 2013-02-05 17:32 ` Andrew Lunn 2013-02-05 17:32 ` Andrew Lunn 2013-02-04 19:19 ` [PATCH v4 4/4] Dove: Thermal: Add DT node and enable in defconfig Andrew Lunn 2013-02-04 19:19 ` Andrew Lunn 2013-02-02 14:35 ` [PATCH v3 2/4] ARM: Kirkwood: Add support thermal sensor for 88F6282 and 88F6283 Andrew Lunn 2013-02-02 14:35 ` Andrew Lunn 2013-02-04 3:14 ` Zhang Rui [this message] 2013-02-04 3:14 ` Zhang Rui 2013-02-04 14:19 ` Jason Cooper 2013-02-04 14:19 ` Jason Cooper 2013-02-08 7:31 ` Zhang Rui 2013-02-08 7:31 ` Zhang Rui 2013-02-08 14:33 ` Jason Cooper 2013-02-08 14:33 ` Jason Cooper 2013-02-02 14:35 ` [PATCH v3 3/4] Thermal: Dove: Add Themal sensor support for Dove Andrew Lunn 2013-02-02 14:35 ` Andrew Lunn 2013-02-02 14:35 ` [PATCH v3 4/4] Dove: Thermal: Add DT node and enable in defconfig Andrew Lunn 2013-02-02 14:35 ` Andrew Lunn
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1359947693.2250.50.camel@rzhang1-mobl4 \ --to=rui.zhang@intel.com \ --cc=andrew@lunn.ch \ --cc=iwamatsu@nigauri.org \ --cc=jason@lakedaemon.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-pm@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.