From: Florian Vaussard <florian.vaussard@epfl.ch> To: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com>, Stephen Warren <swarren@wwwdotorg.org>, Javier Martinez Canillas <javier.martinez@collabora.co.uk>, Anil Kumar <anilk4.v@gmail.com>, linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org, Florian Vaussard <florian.vaussard@epfl.ch> Subject: [PATCH 2/3] ARM: dts: Add omap3-overo NAND flash memory binding Date: Tue, 11 Jun 2013 16:48:57 +0200 [thread overview] Message-ID: <1370962138-9631-3-git-send-email-florian.vaussard@epfl.ch> (raw) In-Reply-To: <1370962138-9631-1-git-send-email-florian.vaussard@epfl.ch> Add device-tree node for the on-board NAND memory. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> --- arch/arm/boot/dts/omap3-overo.dtsi | 50 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3.dtsi | 2 + 2 files changed, 52 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index e112a42..811b74c 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -33,6 +33,56 @@ }; }; +&gpmc { + ranges = <0 0 0x30000000 0x00000004>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + + ti,nand-ecc-opt = "sw"; + + gpmc,device-nand; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,we-off-ns = <30>; + gpmc,oe-off-ns = <48>; + gpmc,access-ns = <54>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,wr-access-ns = <30>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + xloader@0 { + reg = <(0 * SZ_128K) (4 * SZ_128K)>; + }; + + uboot@80000 { + reg = <(4 * SZ_128K) (14 * SZ_128K)>; + }; + + ubootenv@240000 { + reg = <(18 * SZ_128K) (2 * SZ_128K)>; + }; + + linux@280000 { + reg = <(20 * SZ_128K) (32 * SZ_128K)>; + }; + + rootfs@680000 { + reg = <(52 * SZ_128K) MTDPART_SIZ_FULL>; + }; + }; +}; + &i2c1 { clock-frequency = <2600000>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 6d05ee0..65a9390 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -9,7 +9,9 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mtd/partitions.h> #include <dt-bindings/pinctrl/omap.h> +#include <dt-bindings/sizes.h> #include "skeleton.dtsi" -- 1.7.5.4
WARNING: multiple messages have this Message-ID (diff)
From: florian.vaussard@epfl.ch (Florian Vaussard) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/3] ARM: dts: Add omap3-overo NAND flash memory binding Date: Tue, 11 Jun 2013 16:48:57 +0200 [thread overview] Message-ID: <1370962138-9631-3-git-send-email-florian.vaussard@epfl.ch> (raw) In-Reply-To: <1370962138-9631-1-git-send-email-florian.vaussard@epfl.ch> Add device-tree node for the on-board NAND memory. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> --- arch/arm/boot/dts/omap3-overo.dtsi | 50 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3.dtsi | 2 + 2 files changed, 52 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index e112a42..811b74c 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -33,6 +33,56 @@ }; }; +&gpmc { + ranges = <0 0 0x30000000 0x00000004>; /* CS0: NAND */ + + nand at 0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + + ti,nand-ecc-opt = "sw"; + + gpmc,device-nand; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,we-off-ns = <30>; + gpmc,oe-off-ns = <48>; + gpmc,access-ns = <54>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,wr-access-ns = <30>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + xloader at 0 { + reg = <(0 * SZ_128K) (4 * SZ_128K)>; + }; + + uboot at 80000 { + reg = <(4 * SZ_128K) (14 * SZ_128K)>; + }; + + ubootenv at 240000 { + reg = <(18 * SZ_128K) (2 * SZ_128K)>; + }; + + linux at 280000 { + reg = <(20 * SZ_128K) (32 * SZ_128K)>; + }; + + rootfs at 680000 { + reg = <(52 * SZ_128K) MTDPART_SIZ_FULL>; + }; + }; +}; + &i2c1 { clock-frequency = <2600000>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 6d05ee0..65a9390 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -9,7 +9,9 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mtd/partitions.h> #include <dt-bindings/pinctrl/omap.h> +#include <dt-bindings/sizes.h> #include "skeleton.dtsi" -- 1.7.5.4
next prev parent reply other threads:[~2013-06-11 14:48 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-06-11 14:48 [PATCH 0/3] ARM: dts: OMAP3: Use constants with MTD devices Florian Vaussard 2013-06-11 14:48 ` Florian Vaussard 2013-06-11 14:48 ` [PATCH 1/3] ARM: dts: Add headers with constants for MTD partitions Florian Vaussard 2013-06-11 14:48 ` Florian Vaussard 2013-06-11 16:24 ` Stephen Warren 2013-06-11 16:24 ` Stephen Warren 2013-06-11 17:28 ` Florian Vaussard 2013-06-11 17:28 ` Florian Vaussard 2013-06-12 13:05 ` Grant Likely 2013-06-12 13:05 ` Grant Likely 2013-06-19 9:19 ` Florian Vaussard 2013-06-19 9:19 ` Florian Vaussard 2013-06-11 14:48 ` Florian Vaussard [this message] 2013-06-11 14:48 ` [PATCH 2/3] ARM: dts: Add omap3-overo NAND flash memory binding Florian Vaussard 2013-06-11 14:48 ` [PATCH 3/3] ARM: dts: OMAP3: Use MTD constants for OMAP3 boards Florian Vaussard 2013-06-11 14:48 ` Florian Vaussard 2013-06-11 15:29 ` Javier Martinez Canillas 2013-06-11 15:29 ` Javier Martinez Canillas 2013-06-11 17:30 ` Florian Vaussard 2013-06-11 17:30 ` Florian Vaussard 2013-06-12 13:11 ` Grant Likely 2013-06-12 13:11 ` Grant Likely 2013-06-11 16:27 ` Stephen Warren 2013-06-11 16:27 ` Stephen Warren 2013-06-11 17:31 ` Florian Vaussard 2013-06-11 17:31 ` Florian Vaussard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1370962138-9631-3-git-send-email-florian.vaussard@epfl.ch \ --to=florian.vaussard@epfl.ch \ --cc=anilk4.v@gmail.com \ --cc=b-cousson@ti.com \ --cc=devicetree-discuss@lists.ozlabs.org \ --cc=javier.martinez@collabora.co.uk \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=swarren@wwwdotorg.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.