From: Jonas Jensen <jonas.jensen@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org, arm@kernel.org, john.stultz@linaro.org, tglx@linutronix.de, u.kleine-koenig@pengutronix.de, tomasz.figa@gmail.com, linus.walleij@linaro.org, thomas.petazzoni@free-electrons.com, arnd@arndb.de, Jonas Jensen <jonas.jensen@gmail.com> Subject: [PATCH v7] ARM: clocksource: add support for MOXA ART SoCs Date: Fri, 5 Jul 2013 13:46:13 +0200 [thread overview] Message-ID: <1373024773-24574-1-git-send-email-jonas.jensen@gmail.com> (raw) In-Reply-To: <1373018653-18421-1-git-send-email-jonas.jensen@gmail.com> This patch adds an clocksource driver for the main timer(s) found on MOXA ART SoCs. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> --- Notes: Applies to next-20130703 Changes since v6: 1. remove TIMER_CR read back 2. set TIMER_CR from constants drivers/clocksource/Makefile | 1 + drivers/clocksource/moxart_timer.c | 164 +++++++++++++++++++++++++++++++++++++ 2 files changed, 165 insertions(+) create mode 100644 drivers/clocksource/moxart_timer.c diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 9ba8b4d..56257f6 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o obj-$(CONFIG_ARCH_MARCO) += timer-marco.o +obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o obj-$(CONFIG_ARCH_MXS) += mxs_timer.o obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c new file mode 100644 index 0000000..5743853 --- /dev/null +++ b/drivers/clocksource/moxart_timer.c @@ -0,0 +1,164 @@ +/* + * MOXA ART SoCs timer handling. + * + * Copyright (C) 2013 Jonas Jensen + * + * Jonas Jensen <jonas.jensen@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqreturn.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/io.h> +#include <linux/clocksource.h> + +#define TIMER1_BASE 0x00 +#define TIMER2_BASE 0x10 +#define TIMER3_BASE 0x20 + +#define REG_COUNT 0x0 /* writable */ +#define REG_LOAD 0x4 +#define REG_MATCH1 0x8 +#define REG_MATCH2 0xC + +#define TIMER_CR 0x30 +#define TIMER_INTR_STATE 0x34 +#define TIMER_INTR_MASK 0x38 + +/* + * TIMER_CR flags: + * + * TIMEREG_CR_*_CLOCK 0: PCLK, 1: EXT1CLK + * TIMEREG_CR_*_INT overflow interrupt enable bit + */ +#define TIMEREG_CR_1_ENABLE (1 << 0) +#define TIMEREG_CR_1_CLOCK (1 << 1) +#define TIMEREG_CR_1_INT (1 << 2) +#define TIMEREG_CR_2_ENABLE (1 << 3) +#define TIMEREG_CR_2_CLOCK (1 << 4) +#define TIMEREG_CR_2_INT (1 << 5) +#define TIMEREG_CR_3_ENABLE (1 << 6) +#define TIMEREG_CR_3_CLOCK (1 << 7) +#define TIMEREG_CR_3_INT (1 << 8) +#define TIMEREG_CR_COUNT_UP (1 << 9) +#define TIMEREG_CR_COUNT_DOWN (0 << 9) + +#define TIMER1_ENABLE (TIMEREG_CR_2_ENABLE | TIMEREG_CR_1_ENABLE) +#define TIMER1_DISABLE (TIMEREG_CR_2_ENABLE) + +static void __iomem *base; +static unsigned int clock_count_per_tick; + +static void moxart_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + switch (mode) { + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_ONESHOT: + writel(TIMER1_DISABLE, base + TIMER_CR); + writel(~0, base + TIMER1_BASE + REG_LOAD); + break; + case CLOCK_EVT_MODE_PERIODIC: + writel(clock_count_per_tick, base + TIMER1_BASE + REG_LOAD); + writel(TIMER1_ENABLE, base + TIMER_CR); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + writel(TIMER1_DISABLE, base + TIMER_CR); + break; + } +} + +static int moxart_clkevt_next_event(unsigned long cycles, + struct clock_event_device *unused) +{ + u32 u; + + writel(TIMER1_DISABLE, base + TIMER_CR); + + u = readl(base + TIMER1_BASE + REG_COUNT) - cycles; + writel(u, base + TIMER1_BASE + REG_MATCH1); + + writel(TIMER1_ENABLE, base + TIMER_CR); + + return 0; +} + +static struct clock_event_device moxart_clockevent = { + .name = "moxart_timer", + .rating = 200, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = moxart_clkevt_mode, + .set_next_event = moxart_clkevt_next_event, +}; + +static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction moxart_timer_irq = { + .name = "moxart-timer", + .flags = IRQF_TIMER, + .handler = moxart_timer_interrupt, + .dev_id = &moxart_clockevent, +}; + +static void __init moxart_timer_init(struct device_node *node) +{ + int ret, irq; + unsigned long pclk; + struct clk *clk; + + base = of_iomap(node, 0); + if (!base) + panic("%s: of_iomap failed\n", node->full_name); + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) + panic("%s: irq_of_parse_and_map failed\n", node->full_name); + + ret = setup_irq(irq, &moxart_timer_irq); + if (ret) + panic("%s: setup_irq failed\n", node->full_name); + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) + panic("%s: of_clk_get failed\n", node->full_name); + + pclk = clk_get_rate(clk); + + if (clocksource_mmio_init(base + TIMER2_BASE + REG_COUNT, + "moxart_timer", pclk, 200, 32, + clocksource_mmio_readl_down)) + panic("%s: clocksource_mmio_init failed\n", node->full_name); + + clock_count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ); + + writel(~0, base + TIMER2_BASE + REG_LOAD); + writel(TIMEREG_CR_2_ENABLE, base + TIMER_CR); + + moxart_clockevent.cpumask = cpumask_of(0); + + /* + * documentation is not publicly available: + * min_delta / max_delta obtained by trial-and-error, + * max_delta 0xfffffffe should be ok because count + * register size is u32 + */ + clockevents_config_and_register(&moxart_clockevent, pclk, + 0x4, 0xfffffffe); +} +CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init); -- 1.8.2.1
WARNING: multiple messages have this Message-ID (diff)
From: jonas.jensen@gmail.com (Jonas Jensen) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v7] ARM: clocksource: add support for MOXA ART SoCs Date: Fri, 5 Jul 2013 13:46:13 +0200 [thread overview] Message-ID: <1373024773-24574-1-git-send-email-jonas.jensen@gmail.com> (raw) In-Reply-To: <1373018653-18421-1-git-send-email-jonas.jensen@gmail.com> This patch adds an clocksource driver for the main timer(s) found on MOXA ART SoCs. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> --- Notes: Applies to next-20130703 Changes since v6: 1. remove TIMER_CR read back 2. set TIMER_CR from constants drivers/clocksource/Makefile | 1 + drivers/clocksource/moxart_timer.c | 164 +++++++++++++++++++++++++++++++++++++ 2 files changed, 165 insertions(+) create mode 100644 drivers/clocksource/moxart_timer.c diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 9ba8b4d..56257f6 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o obj-$(CONFIG_ARCH_MARCO) += timer-marco.o +obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o obj-$(CONFIG_ARCH_MXS) += mxs_timer.o obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c new file mode 100644 index 0000000..5743853 --- /dev/null +++ b/drivers/clocksource/moxart_timer.c @@ -0,0 +1,164 @@ +/* + * MOXA ART SoCs timer handling. + * + * Copyright (C) 2013 Jonas Jensen + * + * Jonas Jensen <jonas.jensen@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqreturn.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/io.h> +#include <linux/clocksource.h> + +#define TIMER1_BASE 0x00 +#define TIMER2_BASE 0x10 +#define TIMER3_BASE 0x20 + +#define REG_COUNT 0x0 /* writable */ +#define REG_LOAD 0x4 +#define REG_MATCH1 0x8 +#define REG_MATCH2 0xC + +#define TIMER_CR 0x30 +#define TIMER_INTR_STATE 0x34 +#define TIMER_INTR_MASK 0x38 + +/* + * TIMER_CR flags: + * + * TIMEREG_CR_*_CLOCK 0: PCLK, 1: EXT1CLK + * TIMEREG_CR_*_INT overflow interrupt enable bit + */ +#define TIMEREG_CR_1_ENABLE (1 << 0) +#define TIMEREG_CR_1_CLOCK (1 << 1) +#define TIMEREG_CR_1_INT (1 << 2) +#define TIMEREG_CR_2_ENABLE (1 << 3) +#define TIMEREG_CR_2_CLOCK (1 << 4) +#define TIMEREG_CR_2_INT (1 << 5) +#define TIMEREG_CR_3_ENABLE (1 << 6) +#define TIMEREG_CR_3_CLOCK (1 << 7) +#define TIMEREG_CR_3_INT (1 << 8) +#define TIMEREG_CR_COUNT_UP (1 << 9) +#define TIMEREG_CR_COUNT_DOWN (0 << 9) + +#define TIMER1_ENABLE (TIMEREG_CR_2_ENABLE | TIMEREG_CR_1_ENABLE) +#define TIMER1_DISABLE (TIMEREG_CR_2_ENABLE) + +static void __iomem *base; +static unsigned int clock_count_per_tick; + +static void moxart_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + switch (mode) { + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_ONESHOT: + writel(TIMER1_DISABLE, base + TIMER_CR); + writel(~0, base + TIMER1_BASE + REG_LOAD); + break; + case CLOCK_EVT_MODE_PERIODIC: + writel(clock_count_per_tick, base + TIMER1_BASE + REG_LOAD); + writel(TIMER1_ENABLE, base + TIMER_CR); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + writel(TIMER1_DISABLE, base + TIMER_CR); + break; + } +} + +static int moxart_clkevt_next_event(unsigned long cycles, + struct clock_event_device *unused) +{ + u32 u; + + writel(TIMER1_DISABLE, base + TIMER_CR); + + u = readl(base + TIMER1_BASE + REG_COUNT) - cycles; + writel(u, base + TIMER1_BASE + REG_MATCH1); + + writel(TIMER1_ENABLE, base + TIMER_CR); + + return 0; +} + +static struct clock_event_device moxart_clockevent = { + .name = "moxart_timer", + .rating = 200, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = moxart_clkevt_mode, + .set_next_event = moxart_clkevt_next_event, +}; + +static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction moxart_timer_irq = { + .name = "moxart-timer", + .flags = IRQF_TIMER, + .handler = moxart_timer_interrupt, + .dev_id = &moxart_clockevent, +}; + +static void __init moxart_timer_init(struct device_node *node) +{ + int ret, irq; + unsigned long pclk; + struct clk *clk; + + base = of_iomap(node, 0); + if (!base) + panic("%s: of_iomap failed\n", node->full_name); + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) + panic("%s: irq_of_parse_and_map failed\n", node->full_name); + + ret = setup_irq(irq, &moxart_timer_irq); + if (ret) + panic("%s: setup_irq failed\n", node->full_name); + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) + panic("%s: of_clk_get failed\n", node->full_name); + + pclk = clk_get_rate(clk); + + if (clocksource_mmio_init(base + TIMER2_BASE + REG_COUNT, + "moxart_timer", pclk, 200, 32, + clocksource_mmio_readl_down)) + panic("%s: clocksource_mmio_init failed\n", node->full_name); + + clock_count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ); + + writel(~0, base + TIMER2_BASE + REG_LOAD); + writel(TIMEREG_CR_2_ENABLE, base + TIMER_CR); + + moxart_clockevent.cpumask = cpumask_of(0); + + /* + * documentation is not publicly available: + * min_delta / max_delta obtained by trial-and-error, + * max_delta 0xfffffffe should be ok because count + * register size is u32 + */ + clockevents_config_and_register(&moxart_clockevent, pclk, + 0x4, 0xfffffffe); +} +CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init); -- 1.8.2.1
next prev parent reply other threads:[~2013-07-05 11:47 UTC|newest] Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-06-18 10:00 [PATCH] ARM: clocksource: add support for MOXA ART SoCs Jonas Jensen 2013-06-18 10:00 ` Jonas Jensen 2013-06-18 15:14 ` Thomas Petazzoni 2013-06-18 15:14 ` Thomas Petazzoni 2013-06-18 15:28 ` Arnd Bergmann 2013-06-18 15:28 ` Arnd Bergmann 2013-06-26 14:53 ` [PATCH v2] " Jonas Jensen 2013-06-26 14:53 ` Jonas Jensen 2013-06-26 14:59 ` Jonas Jensen 2013-06-26 14:59 ` Jonas Jensen 2013-06-26 16:10 ` Uwe Kleine-König 2013-06-26 16:10 ` Uwe Kleine-König 2013-06-26 19:15 ` Linus Walleij 2013-06-26 19:15 ` Linus Walleij 2013-06-27 11:23 ` [PATCH v3] " Jonas Jensen 2013-06-27 11:23 ` Jonas Jensen 2013-06-28 13:34 ` Thomas Gleixner 2013-06-28 13:34 ` Thomas Gleixner 2013-07-01 14:02 ` [PATCH v4] " Jonas Jensen 2013-07-01 14:02 ` Jonas Jensen 2013-07-01 17:55 ` Thomas Gleixner 2013-07-01 17:55 ` Thomas Gleixner 2013-07-02 20:19 ` Linus Walleij 2013-07-02 20:19 ` Linus Walleij 2013-07-04 12:19 ` [PATCH v5] " Jonas Jensen 2013-07-04 12:19 ` Jonas Jensen 2013-07-04 21:42 ` Thomas Gleixner 2013-07-04 21:42 ` Thomas Gleixner 2013-07-05 10:05 ` Jonas Jensen 2013-07-05 10:05 ` Jonas Jensen 2013-07-05 10:21 ` Thomas Gleixner 2013-07-05 10:21 ` Thomas Gleixner 2013-07-05 11:48 ` Jonas Jensen 2013-07-05 11:48 ` Jonas Jensen 2013-07-05 10:04 ` [PATCH v6] " Jonas Jensen 2013-07-05 10:04 ` Jonas Jensen 2013-07-05 11:46 ` Jonas Jensen [this message] 2013-07-05 11:46 ` [PATCH v7] " Jonas Jensen 2013-07-16 13:52 ` Daniel Lezcano 2013-07-16 13:52 ` Daniel Lezcano 2013-07-16 14:44 ` [PATCH v8] " Jonas Jensen 2013-07-16 14:44 ` Jonas Jensen 2013-07-16 15:01 ` Daniel Lezcano 2013-07-16 15:01 ` Daniel Lezcano 2013-07-17 8:14 ` Jonas Jensen 2013-07-17 8:14 ` Jonas Jensen 2013-07-17 12:13 ` Daniel Lezcano 2013-07-17 12:13 ` Daniel Lezcano 2013-07-17 8:04 ` [PATCH v9] " Jonas Jensen 2013-07-17 8:04 ` Jonas Jensen 2013-07-19 11:12 ` [PATCH] ARM: clocksource: moxart: documentation: update device tree bindings document Jonas Jensen 2013-07-19 11:12 ` Jonas Jensen 2013-07-19 12:16 ` Daniel Lezcano 2013-07-19 12:16 ` Daniel Lezcano 2013-07-19 12:50 ` Jonas Jensen 2013-07-19 12:50 ` Jonas Jensen 2013-07-20 20:45 ` [PATCH v9] ARM: clocksource: add support for MOXA ART SoCs Linus Walleij 2013-07-20 20:45 ` Linus Walleij 2013-07-20 21:34 ` Daniel Lezcano 2013-07-20 21:34 ` Daniel Lezcano 2013-07-26 14:03 ` [PATCH] ARM: clocksource: moxart: add bitops.h include Jonas Jensen 2013-07-26 14:03 ` Jonas Jensen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1373024773-24574-1-git-send-email-jonas.jensen@gmail.com \ --to=jonas.jensen@gmail.com \ --cc=arm@kernel.org \ --cc=arnd@arndb.de \ --cc=john.stultz@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=tglx@linutronix.de \ --cc=thomas.petazzoni@free-electrons.com \ --cc=tomasz.figa@gmail.com \ --cc=u.kleine-koenig@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.