* [PATCH v2 0/7] Add device tree support for Exynos4412 Trats2 cameras
@ 2013-08-28 15:55 ` Sylwester Nawrocki
0 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-media
Cc: mturquette, g.liakhovetski, laurent.pinchart, arun.kk, hverkuil,
sakari.ailus, a.hajda, kyungmin.park, t.figa, linux-arm-kernel,
Sylwester Nawrocki
This series is intended to add device tree support for both cameras
on the Exynos4412 SoC Trats 2 board. It converts related drivers to use
the v4l2-async API and expose the sensor's master clock supplied by the
camera host interface through the common clock API.
This changeset is an updated version of my patch series [1] separating
the sensor subdev driver from the exynos4-fimc-is module and adding
asynchronous sensor registration support. There is also included next
iteration of the patch adding DT bits to the rear facing S5C73M3 camera
module driver [2].
The S5K6A3 is a raw image sensor of the front facing camera connected
to the SoC local ISP (FIMC-IS).
This series depends on my patches adding clk_unregister() implementation
[3].
Any feedback, especially on the "s5k6a3: Add DT binding documentation"
patch where I've described some issue with the common video-interfaces
binding is welcome.
[1] http://www.spinics.net/lists/linux-media/msg66073.html
[2] https://linuxtv.org/patch/19386/
[3] https://lkml.org/lkml/2013/8/24/63
Thanks.
Sylwester
Andrzej Hajda (1):
V4L: s5c73m3: Add device tree support
Sylwester Nawrocki (6):
V4L: s5k6a3: Add DT binding documentation
V4L: Add driver for s5k6a3 image sensor
V4L: s5k6a3: Add support for asynchronous subdev registration
exynos4-is: Add clock provider for the external clocks
exynos4-is: Use external s5k6a3 sensor driver
exynos4-is: Add support for asynchronous sensor subddevs registration
.../devicetree/bindings/media/samsung-fimc.txt | 21 +-
.../devicetree/bindings/media/samsung-s5c73m3.txt | 95 ++++++
.../devicetree/bindings/media/samsung-s5k6a3.txt | 31 ++
drivers/media/i2c/Kconfig | 8 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 206 +++++++++---
drivers/media/i2c/s5c73m3/s5c73m3-spi.c | 6 +
drivers/media/i2c/s5c73m3/s5c73m3.h | 4 +
drivers/media/i2c/s5k6a3.c | 340 ++++++++++++++++++++
drivers/media/platform/exynos4-is/fimc-is-regs.c | 2 +-
drivers/media/platform/exynos4-is/fimc-is-sensor.c | 285 +---------------
drivers/media/platform/exynos4-is/fimc-is-sensor.h | 49 +--
drivers/media/platform/exynos4-is/fimc-is.c | 97 +++---
drivers/media/platform/exynos4-is/fimc-is.h | 4 +-
drivers/media/platform/exynos4-is/media-dev.c | 335 +++++++++++++------
drivers/media/platform/exynos4-is/media-dev.h | 31 +-
16 files changed, 984 insertions(+), 531 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
create mode 100644 drivers/media/i2c/s5k6a3.c
--
1.7.9.5
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 0/7] Add device tree support for Exynos4412 Trats2 cameras
@ 2013-08-28 15:55 ` Sylwester Nawrocki
0 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-arm-kernel
This series is intended to add device tree support for both cameras
on the Exynos4412 SoC Trats 2 board. It converts related drivers to use
the v4l2-async API and expose the sensor's master clock supplied by the
camera host interface through the common clock API.
This changeset is an updated version of my patch series [1] separating
the sensor subdev driver from the exynos4-fimc-is module and adding
asynchronous sensor registration support. There is also included next
iteration of the patch adding DT bits to the rear facing S5C73M3 camera
module driver [2].
The S5K6A3 is a raw image sensor of the front facing camera connected
to the SoC local ISP (FIMC-IS).
This series depends on my patches adding clk_unregister() implementation
[3].
Any feedback, especially on the "s5k6a3: Add DT binding documentation"
patch where I've described some issue with the common video-interfaces
binding is welcome.
[1] http://www.spinics.net/lists/linux-media/msg66073.html
[2] https://linuxtv.org/patch/19386/
[3] https://lkml.org/lkml/2013/8/24/63
Thanks.
Sylwester
Andrzej Hajda (1):
V4L: s5c73m3: Add device tree support
Sylwester Nawrocki (6):
V4L: s5k6a3: Add DT binding documentation
V4L: Add driver for s5k6a3 image sensor
V4L: s5k6a3: Add support for asynchronous subdev registration
exynos4-is: Add clock provider for the external clocks
exynos4-is: Use external s5k6a3 sensor driver
exynos4-is: Add support for asynchronous sensor subddevs registration
.../devicetree/bindings/media/samsung-fimc.txt | 21 +-
.../devicetree/bindings/media/samsung-s5c73m3.txt | 95 ++++++
.../devicetree/bindings/media/samsung-s5k6a3.txt | 31 ++
drivers/media/i2c/Kconfig | 8 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 206 +++++++++---
drivers/media/i2c/s5c73m3/s5c73m3-spi.c | 6 +
drivers/media/i2c/s5c73m3/s5c73m3.h | 4 +
drivers/media/i2c/s5k6a3.c | 340 ++++++++++++++++++++
drivers/media/platform/exynos4-is/fimc-is-regs.c | 2 +-
drivers/media/platform/exynos4-is/fimc-is-sensor.c | 285 +---------------
drivers/media/platform/exynos4-is/fimc-is-sensor.h | 49 +--
drivers/media/platform/exynos4-is/fimc-is.c | 97 +++---
drivers/media/platform/exynos4-is/fimc-is.h | 4 +-
drivers/media/platform/exynos4-is/media-dev.c | 335 +++++++++++++------
drivers/media/platform/exynos4-is/media-dev.h | 31 +-
16 files changed, 984 insertions(+), 531 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
create mode 100644 drivers/media/i2c/s5k6a3.c
--
1.7.9.5
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 1/7] V4L: s5c73m3: Add device tree support
2013-08-28 15:55 ` Sylwester Nawrocki
@ 2013-08-28 15:55 ` Sylwester Nawrocki
-1 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-media
Cc: mturquette, g.liakhovetski, laurent.pinchart, arun.kk, hverkuil,
sakari.ailus, a.hajda, kyungmin.park, t.figa, linux-arm-kernel,
Sylwester Nawrocki
From: Andrzej Hajda <a.hajda@samsung.com>
This patch adds the V4L2 asychronous subdev registration and
device tree support. Common clock API is used to control the
sensor master clock from within the subdev driver.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
Changes since v1:
- added missing ret assignment on clk_get failure,
- fixed error paths in probe(),
- changed clock name to cis_extclk as specified in the datasheet,
- separate properties used for the XSHUTDOWN, STANDBY GPIOs,
- multiple correctiond in the binding documentation (improved
description of data-lanes and clock-frequency properties).
---
.../devicetree/bindings/media/samsung-s5c73m3.txt | 95 +++++++++
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 206 +++++++++++++++-----
drivers/media/i2c/s5c73m3/s5c73m3-spi.c | 6 +
drivers/media/i2c/s5c73m3/s5c73m3.h | 4 +
4 files changed, 261 insertions(+), 50 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
new file mode 100644
index 0000000..6d6c0b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
@@ -0,0 +1,95 @@
+Samsung S5C73M3 8Mp camera ISP
+------------------------------
+
+The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video
+data busses. The I2C bus is the main control bus and additionally the SPI bus
+is used, mostly for transferring the firmware to and from the device. Two
+slave device nodes corresponding to these control bus interfaces are required
+and should be placed under respective bus controller nodes.
+
+I2C slave device node
+---------------------
+
+Required properties:
+
+- compatible : "samsung,s5c73m3";
+- reg : I2C slave address of the sensor;
+- vdd-int-supply : digital power supply (1.2V);
+- vdda-supply : analog power supply (1.2V);
+- vdd-reg-supply : regulator input power supply (2.8V);
+- vddio-host-supply : host I/O power supply (1.8V to 2.8V);
+- vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V);
+- vdd-af-supply : lens power supply (2.8V);
+- xshutdown-gpios : specifier of GPIO connected to the XSHUTDOWN pin;
+- standby-gpios : specifier of GPIO connected to the STANDBY pin;
+- clocks : contains the sensor's CIS_EXTCLK clock specifier;
+- clock-names : contains "cis_extclk" entry;
+
+Optional properties:
+
+- clock-frequency : the frequency at which the "cis_extclk" clock should be
+ configured to operate, in Hz; if this property is not
+ specified default 24 MHz value will be used.
+
+The common video interfaces bindings (see video-interfaces.txt) should be used
+to specify link from the S5C73M3 to an external image data receiver. The S5C73M3
+device node should contain one 'port' child node with an 'endpoint' subnode for
+this purpose. The data link from a raw image sensor to the S5C73M3 can be
+similarly specified, but it is optional since the S5C73M3 ISP and a raw image
+sensor are usually inseparable and form a hybrid module.
+
+Following properties are valid for the endpoint node(s):
+
+endpoint subnode
+----------------
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+ video-interfaces.txt. This sensor doesn't support data lane remapping
+ and physical lane indexes in subsequent elements of the array should
+ be only consecutive ascending values.
+
+SPI device node
+---------------
+
+Required properties:
+
+- compatible : "samsung,s5c73m3";
+
+For more details see description of the SPI busses bindings
+(../spi/spi-bus.txt) and bindings of a specific bus controller.
+
+Example:
+
+i2c@138A000000 {
+ ...
+ s5c73m3@3c {
+ compatible = "samsung,s5c73m3";
+ reg = <0x3c>;
+ vdd-int-supply = <&buck9_reg>;
+ vdda-supply = <&ldo17_reg>;
+ vdd-reg-supply = <&cam_io_reg>;
+ vddio-host-supply = <&ldo18_reg>;
+ vddio-cis-supply = <&ldo9_reg>;
+ vdd-af-supply = <&cam_af_reg>;
+ clock-frequency = <24000000>;
+ clocks = <&clk 0>;
+ clock-names = "cis_extclk";
+ reset-gpios = <&gpf1 3 1>;
+ standby-gpios = <&gpm0 1 1>;
+ port {
+ s5c73m3_ep: endpoint {
+ remote-endpoint = <&csis0_ep>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+};
+
+spi@1392000 {
+ ...
+ s5c73m3_spi: s5c73m3 {
+ compatible = "samsung,s5c73m3";
+ reg = <0>;
+ ...
+ };
+};
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
index b76ec0e..270d324 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
+++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
@@ -15,7 +15,7 @@
* GNU General Public License for more details.
*/
-#include <linux/sizes.h>
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/gpio.h>
@@ -23,7 +23,9 @@
#include <linux/init.h>
#include <linux/media.h>
#include <linux/module.h>
+#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
+#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/videodev2.h>
@@ -33,6 +35,7 @@
#include <media/v4l2-subdev.h>
#include <media/v4l2-mediabus.h>
#include <media/s5c73m3.h>
+#include <media/v4l2-of.h>
#include "s5c73m3.h"
@@ -46,6 +49,8 @@ static int update_fw;
module_param(update_fw, int, 0644);
#define S5C73M3_EMBEDDED_DATA_MAXLEN SZ_4K
+#define S5C73M3_MIPI_DATA_LANES 4
+#define S5C73M3_CLK_NAME "cis_extclk"
static const char * const s5c73m3_supply_names[S5C73M3_MAX_SUPPLIES] = {
"vdd-int", /* Digital Core supply (1.2V), CAM_ISP_CORE_1.2V */
@@ -1355,9 +1360,20 @@ static int __s5c73m3_power_on(struct s5c73m3 *state)
for (i = 0; i < S5C73M3_MAX_SUPPLIES; i++) {
ret = regulator_enable(state->supplies[i].consumer);
if (ret)
- goto err;
+ goto err_reg_dis;
}
+ ret = clk_set_rate(state->clock, state->mclk_frequency);
+ if (ret < 0)
+ goto err_reg_dis;
+
+ ret = clk_prepare_enable(state->clock);
+ if (ret < 0)
+ goto err_reg_dis;
+
+ v4l2_dbg(1, s5c73m3_dbg, &state->oif_sd, "clock frequency: %ld\n",
+ clk_get_rate(state->clock));
+
s5c73m3_gpio_deassert(state, STBY);
usleep_range(100, 200);
@@ -1365,7 +1381,8 @@ static int __s5c73m3_power_on(struct s5c73m3 *state)
usleep_range(50, 100);
return 0;
-err:
+
+err_reg_dis:
for (--i; i >= 0; i--)
regulator_disable(state->supplies[i].consumer);
return ret;
@@ -1380,6 +1397,9 @@ static int __s5c73m3_power_off(struct s5c73m3 *state)
if (s5c73m3_gpio_assert(state, STBY))
usleep_range(100, 200);
+
+ clk_disable_unprepare(state->clock);
+
state->streaming = 0;
state->isp_ready = 0;
@@ -1388,6 +1408,7 @@ static int __s5c73m3_power_off(struct s5c73m3 *state)
if (ret)
goto err;
}
+
return 0;
err:
for (++i; i < S5C73M3_MAX_SUPPLIES; i++) {
@@ -1404,6 +1425,7 @@ static int s5c73m3_oif_set_power(struct v4l2_subdev *sd, int on)
struct s5c73m3 *state = oif_sd_to_s5c73m3(sd);
int ret = 0;
+
mutex_lock(&state->lock);
if (on && !state->power) {
@@ -1451,17 +1473,6 @@ static int s5c73m3_oif_registered(struct v4l2_subdev *sd)
S5C73M3_JPEG_PAD, &state->oif_sd.entity, OIF_JPEG_PAD,
MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED);
- mutex_lock(&state->lock);
- ret = __s5c73m3_power_on(state);
- if (ret == 0)
- s5c73m3_get_fw_version(state);
-
- __s5c73m3_power_off(state);
- mutex_unlock(&state->lock);
-
- v4l2_dbg(1, s5c73m3_dbg, sd, "%s: Booting %s (%d)\n",
- __func__, ret ? "failed" : "succeded", ret);
-
return ret;
}
@@ -1519,41 +1530,108 @@ static const struct v4l2_subdev_ops oif_subdev_ops = {
.video = &s5c73m3_oif_video_ops,
};
-static int s5c73m3_configure_gpios(struct s5c73m3 *state,
- const struct s5c73m3_platform_data *pdata)
+static int s5c73m3_configure_gpios(struct s5c73m3 *state)
+{
+ static const char * const gpio_names[] = {
+ "S5C73M3_STBY", "S5C73M3_RST"
+ };
+ struct i2c_client *c = state->i2c_client;
+ struct s5c73m3_gpio *g = state->gpio;
+ int ret, i;
+
+ for (i = 0; i < GPIO_NUM; ++i) {
+ unsigned int flags = GPIOF_DIR_OUT;
+ if (g[i].level)
+ flags |= GPIOF_INIT_HIGH;
+ ret = devm_gpio_request_one(&c->dev, g[i].gpio, flags,
+ gpio_names[i]);
+ if (ret) {
+ v4l2_err(c, "failed to request gpio %s\n",
+ gpio_names[i]);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int s5c73m3_parse_gpios(struct s5c73m3 *state)
+{
+ static const char * const prop_names[] = {
+ "standby-gpios", "xshutdown-gpios",
+ };
+ struct device *dev = &state->i2c_client->dev;
+ struct device_node *node = dev->of_node;
+ int ret, i;
+
+ for (i = 0; i < GPIO_NUM; ++i) {
+ enum of_gpio_flags of_flags;
+
+ ret = of_get_named_gpio_flags(node, prop_names[i],
+ 0, &of_flags);
+ if (ret < 0) {
+ dev_err(dev, "failed to parse %s DT property\n",
+ prop_names[i]);
+ return -EINVAL;
+ }
+ state->gpio[i].gpio = ret;
+ state->gpio[i].level = !(of_flags & OF_GPIO_ACTIVE_LOW);
+ }
+ return 0;
+}
+
+static int s5c73m3_get_platform_data(struct s5c73m3 *state)
{
struct device *dev = &state->i2c_client->dev;
- const struct s5c73m3_gpio *gpio;
- unsigned long flags;
+ const struct s5c73m3_platform_data *pdata = dev->platform_data;
+ struct device_node *node = dev->of_node;
+ struct device_node *node_ep;
+ struct v4l2_of_endpoint ep;
int ret;
- state->gpio[STBY].gpio = -EINVAL;
- state->gpio[RST].gpio = -EINVAL;
+ if (!node) {
+ if (!pdata) {
+ dev_err(dev, "Platform data not specified\n");
+ return -EINVAL;
+ }
- gpio = &pdata->gpio_stby;
- if (gpio_is_valid(gpio->gpio)) {
- flags = (gpio->level ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW)
- | GPIOF_EXPORT;
- ret = devm_gpio_request_one(dev, gpio->gpio, flags,
- "S5C73M3_STBY");
- if (ret < 0)
- return ret;
+ state->mclk_frequency = pdata->mclk_frequency;
+ state->gpio[STBY] = pdata->gpio_stby;
+ state->gpio[RST] = pdata->gpio_reset;
+ return 0;
+ }
- state->gpio[STBY] = *gpio;
+ if (of_property_read_u32(node, "clock-frequency",
+ &state->mclk_frequency)) {
+ state->mclk_frequency = S5C73M3_DEFAULT_MCLK_FREQ;
+ dev_info(dev, "using default %u Hz clock frequency\n",
+ state->mclk_frequency);
}
- gpio = &pdata->gpio_reset;
- if (gpio_is_valid(gpio->gpio)) {
- flags = (gpio->level ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW)
- | GPIOF_EXPORT;
- ret = devm_gpio_request_one(dev, gpio->gpio, flags,
- "S5C73M3_RST");
- if (ret < 0)
- return ret;
+ ret = s5c73m3_parse_gpios(state);
+ if (ret < 0)
+ return -EINVAL;
- state->gpio[RST] = *gpio;
+ node_ep = v4l2_of_get_next_endpoint(node, NULL);
+ if (!node_ep) {
+ dev_warn(dev, "no endpoint defined for node: %s\n",
+ node->full_name);
+ return 0;
}
+ v4l2_of_parse_endpoint(node_ep, &ep);
+ of_node_put(node_ep);
+
+ if (ep.bus_type != V4L2_MBUS_CSI2) {
+ dev_err(dev, "unsupported bus type\n");
+ return -EINVAL;
+ }
+ /*
+ * Number of MIPI CSI-2 data lanes is currently not configurable,
+ * always a default value of 4 lanes is used.
+ */
+ if (ep.bus.mipi_csi2.num_data_lanes != S5C73M3_MIPI_DATA_LANES)
+ dev_info(dev, "falling back to 4 MIPI CSI-2 data lanes\n");
+
return 0;
}
@@ -1561,21 +1639,24 @@ static int s5c73m3_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
- const struct s5c73m3_platform_data *pdata = client->dev.platform_data;
struct v4l2_subdev *sd;
struct v4l2_subdev *oif_sd;
struct s5c73m3 *state;
int ret, i;
- if (pdata == NULL) {
- dev_err(&client->dev, "Platform data not specified\n");
- return -EINVAL;
- }
-
state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
+ state->clock = devm_clk_get(dev, S5C73M3_CLK_NAME);
+ if (IS_ERR(state->clock))
+ return -EPROBE_DEFER;
+
+ state->i2c_client = client;
+ ret = s5c73m3_get_platform_data(state);
+ if (ret < 0)
+ return ret;
+
mutex_init(&state->lock);
sd = &state->sensor_sd;
oif_sd = &state->oif_sd;
@@ -1613,11 +1694,7 @@ static int s5c73m3_probe(struct i2c_client *client,
if (ret < 0)
return ret;
- state->mclk_frequency = pdata->mclk_frequency;
- state->bus_type = pdata->bus_type;
- state->i2c_client = client;
-
- ret = s5c73m3_configure_gpios(state, pdata);
+ ret = s5c73m3_configure_gpios(state);
if (ret)
goto out_err;
@@ -1651,9 +1728,29 @@ static int s5c73m3_probe(struct i2c_client *client,
if (ret < 0)
goto out_err;
+ oif_sd->dev = dev;
+
+ ret = __s5c73m3_power_on(state);
+ if (ret < 0)
+ goto out_err1;
+
+ ret = s5c73m3_get_fw_version(state);
+ __s5c73m3_power_off(state);
+
+ if (ret < 0) {
+ dev_err(dev, "Device detection failed: %d\n", ret);
+ goto out_err1;
+ }
+
+ ret = v4l2_async_register_subdev(oif_sd);
+ if (ret < 0)
+ goto out_err1;
+
v4l2_info(sd, "%s: completed succesfully\n", __func__);
return 0;
+out_err1:
+ s5c73m3_unregister_spi_driver(state);
out_err:
media_entity_cleanup(&sd->entity);
return ret;
@@ -1665,7 +1762,7 @@ static int s5c73m3_remove(struct i2c_client *client)
struct s5c73m3 *state = oif_sd_to_s5c73m3(oif_sd);
struct v4l2_subdev *sensor_sd = &state->sensor_sd;
- v4l2_device_unregister_subdev(oif_sd);
+ v4l2_async_unregister_subdev(oif_sd);
v4l2_ctrl_handler_free(oif_sd->ctrl_handler);
media_entity_cleanup(&oif_sd->entity);
@@ -1684,8 +1781,17 @@ static const struct i2c_device_id s5c73m3_id[] = {
};
MODULE_DEVICE_TABLE(i2c, s5c73m3_id);
+#ifdef CONFIG_OF
+static const struct of_device_id s5c73m3_of_match[] = {
+ { .compatible = "samsung,s5c73m3" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, s5c73m3_of_match);
+#endif
+
static struct i2c_driver s5c73m3_i2c_driver = {
.driver = {
+ .of_match_table = of_match_ptr(s5c73m3_of_match),
.name = DRIVER_NAME,
},
.probe = s5c73m3_probe,
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
index 8079e26..f60b265 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
+++ b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
@@ -27,6 +27,11 @@
#define S5C73M3_SPI_DRV_NAME "S5C73M3-SPI"
+static const struct of_device_id s5c73m3_spi_ids[] = {
+ { .compatible = "samsung,s5c73m3" },
+ { }
+};
+
enum spi_direction {
SPI_DIR_RX,
SPI_DIR_TX
@@ -146,6 +151,7 @@ int s5c73m3_register_spi_driver(struct s5c73m3 *state)
spidrv->driver.name = S5C73M3_SPI_DRV_NAME;
spidrv->driver.bus = &spi_bus_type;
spidrv->driver.owner = THIS_MODULE;
+ spidrv->driver.of_match_table = s5c73m3_spi_ids;
return spi_register_driver(spidrv);
}
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h
index 9d2c086..2917857 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3.h
+++ b/drivers/media/i2c/s5c73m3/s5c73m3.h
@@ -17,6 +17,7 @@
#ifndef S5C73M3_H_
#define S5C73M3_H_
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/regulator/consumer.h>
#include <media/v4l2-common.h>
@@ -321,6 +322,7 @@ enum s5c73m3_oif_pads {
#define S5C73M3_MAX_SUPPLIES 6
+#define S5C73M3_DEFAULT_MCLK_FREQ 24000000U
struct s5c73m3_ctrls {
struct v4l2_ctrl_handler handler;
@@ -391,6 +393,8 @@ struct s5c73m3 {
struct regulator_bulk_data supplies[S5C73M3_MAX_SUPPLIES];
struct s5c73m3_gpio gpio[GPIO_NUM];
+ struct clk *clock;
+
/* External master clock frequency */
u32 mclk_frequency;
/* Video bus type - MIPI-CSI2/paralell */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 1/7] V4L: s5c73m3: Add device tree support
@ 2013-08-28 15:55 ` Sylwester Nawrocki
0 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-arm-kernel
From: Andrzej Hajda <a.hajda@samsung.com>
This patch adds the V4L2 asychronous subdev registration and
device tree support. Common clock API is used to control the
sensor master clock from within the subdev driver.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
Changes since v1:
- added missing ret assignment on clk_get failure,
- fixed error paths in probe(),
- changed clock name to cis_extclk as specified in the datasheet,
- separate properties used for the XSHUTDOWN, STANDBY GPIOs,
- multiple correctiond in the binding documentation (improved
description of data-lanes and clock-frequency properties).
---
.../devicetree/bindings/media/samsung-s5c73m3.txt | 95 +++++++++
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 206 +++++++++++++++-----
drivers/media/i2c/s5c73m3/s5c73m3-spi.c | 6 +
drivers/media/i2c/s5c73m3/s5c73m3.h | 4 +
4 files changed, 261 insertions(+), 50 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
new file mode 100644
index 0000000..6d6c0b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
@@ -0,0 +1,95 @@
+Samsung S5C73M3 8Mp camera ISP
+------------------------------
+
+The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video
+data busses. The I2C bus is the main control bus and additionally the SPI bus
+is used, mostly for transferring the firmware to and from the device. Two
+slave device nodes corresponding to these control bus interfaces are required
+and should be placed under respective bus controller nodes.
+
+I2C slave device node
+---------------------
+
+Required properties:
+
+- compatible : "samsung,s5c73m3";
+- reg : I2C slave address of the sensor;
+- vdd-int-supply : digital power supply (1.2V);
+- vdda-supply : analog power supply (1.2V);
+- vdd-reg-supply : regulator input power supply (2.8V);
+- vddio-host-supply : host I/O power supply (1.8V to 2.8V);
+- vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V);
+- vdd-af-supply : lens power supply (2.8V);
+- xshutdown-gpios : specifier of GPIO connected to the XSHUTDOWN pin;
+- standby-gpios : specifier of GPIO connected to the STANDBY pin;
+- clocks : contains the sensor's CIS_EXTCLK clock specifier;
+- clock-names : contains "cis_extclk" entry;
+
+Optional properties:
+
+- clock-frequency : the frequency at which the "cis_extclk" clock should be
+ configured to operate, in Hz; if this property is not
+ specified default 24 MHz value will be used.
+
+The common video interfaces bindings (see video-interfaces.txt) should be used
+to specify link from the S5C73M3 to an external image data receiver. The S5C73M3
+device node should contain one 'port' child node with an 'endpoint' subnode for
+this purpose. The data link from a raw image sensor to the S5C73M3 can be
+similarly specified, but it is optional since the S5C73M3 ISP and a raw image
+sensor are usually inseparable and form a hybrid module.
+
+Following properties are valid for the endpoint node(s):
+
+endpoint subnode
+----------------
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+ video-interfaces.txt. This sensor doesn't support data lane remapping
+ and physical lane indexes in subsequent elements of the array should
+ be only consecutive ascending values.
+
+SPI device node
+---------------
+
+Required properties:
+
+- compatible : "samsung,s5c73m3";
+
+For more details see description of the SPI busses bindings
+(../spi/spi-bus.txt) and bindings of a specific bus controller.
+
+Example:
+
+i2c at 138A000000 {
+ ...
+ s5c73m3 at 3c {
+ compatible = "samsung,s5c73m3";
+ reg = <0x3c>;
+ vdd-int-supply = <&buck9_reg>;
+ vdda-supply = <&ldo17_reg>;
+ vdd-reg-supply = <&cam_io_reg>;
+ vddio-host-supply = <&ldo18_reg>;
+ vddio-cis-supply = <&ldo9_reg>;
+ vdd-af-supply = <&cam_af_reg>;
+ clock-frequency = <24000000>;
+ clocks = <&clk 0>;
+ clock-names = "cis_extclk";
+ reset-gpios = <&gpf1 3 1>;
+ standby-gpios = <&gpm0 1 1>;
+ port {
+ s5c73m3_ep: endpoint {
+ remote-endpoint = <&csis0_ep>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+};
+
+spi at 1392000 {
+ ...
+ s5c73m3_spi: s5c73m3 {
+ compatible = "samsung,s5c73m3";
+ reg = <0>;
+ ...
+ };
+};
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
index b76ec0e..270d324 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
+++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
@@ -15,7 +15,7 @@
* GNU General Public License for more details.
*/
-#include <linux/sizes.h>
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/gpio.h>
@@ -23,7 +23,9 @@
#include <linux/init.h>
#include <linux/media.h>
#include <linux/module.h>
+#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
+#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/videodev2.h>
@@ -33,6 +35,7 @@
#include <media/v4l2-subdev.h>
#include <media/v4l2-mediabus.h>
#include <media/s5c73m3.h>
+#include <media/v4l2-of.h>
#include "s5c73m3.h"
@@ -46,6 +49,8 @@ static int update_fw;
module_param(update_fw, int, 0644);
#define S5C73M3_EMBEDDED_DATA_MAXLEN SZ_4K
+#define S5C73M3_MIPI_DATA_LANES 4
+#define S5C73M3_CLK_NAME "cis_extclk"
static const char * const s5c73m3_supply_names[S5C73M3_MAX_SUPPLIES] = {
"vdd-int", /* Digital Core supply (1.2V), CAM_ISP_CORE_1.2V */
@@ -1355,9 +1360,20 @@ static int __s5c73m3_power_on(struct s5c73m3 *state)
for (i = 0; i < S5C73M3_MAX_SUPPLIES; i++) {
ret = regulator_enable(state->supplies[i].consumer);
if (ret)
- goto err;
+ goto err_reg_dis;
}
+ ret = clk_set_rate(state->clock, state->mclk_frequency);
+ if (ret < 0)
+ goto err_reg_dis;
+
+ ret = clk_prepare_enable(state->clock);
+ if (ret < 0)
+ goto err_reg_dis;
+
+ v4l2_dbg(1, s5c73m3_dbg, &state->oif_sd, "clock frequency: %ld\n",
+ clk_get_rate(state->clock));
+
s5c73m3_gpio_deassert(state, STBY);
usleep_range(100, 200);
@@ -1365,7 +1381,8 @@ static int __s5c73m3_power_on(struct s5c73m3 *state)
usleep_range(50, 100);
return 0;
-err:
+
+err_reg_dis:
for (--i; i >= 0; i--)
regulator_disable(state->supplies[i].consumer);
return ret;
@@ -1380,6 +1397,9 @@ static int __s5c73m3_power_off(struct s5c73m3 *state)
if (s5c73m3_gpio_assert(state, STBY))
usleep_range(100, 200);
+
+ clk_disable_unprepare(state->clock);
+
state->streaming = 0;
state->isp_ready = 0;
@@ -1388,6 +1408,7 @@ static int __s5c73m3_power_off(struct s5c73m3 *state)
if (ret)
goto err;
}
+
return 0;
err:
for (++i; i < S5C73M3_MAX_SUPPLIES; i++) {
@@ -1404,6 +1425,7 @@ static int s5c73m3_oif_set_power(struct v4l2_subdev *sd, int on)
struct s5c73m3 *state = oif_sd_to_s5c73m3(sd);
int ret = 0;
+
mutex_lock(&state->lock);
if (on && !state->power) {
@@ -1451,17 +1473,6 @@ static int s5c73m3_oif_registered(struct v4l2_subdev *sd)
S5C73M3_JPEG_PAD, &state->oif_sd.entity, OIF_JPEG_PAD,
MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED);
- mutex_lock(&state->lock);
- ret = __s5c73m3_power_on(state);
- if (ret == 0)
- s5c73m3_get_fw_version(state);
-
- __s5c73m3_power_off(state);
- mutex_unlock(&state->lock);
-
- v4l2_dbg(1, s5c73m3_dbg, sd, "%s: Booting %s (%d)\n",
- __func__, ret ? "failed" : "succeded", ret);
-
return ret;
}
@@ -1519,41 +1530,108 @@ static const struct v4l2_subdev_ops oif_subdev_ops = {
.video = &s5c73m3_oif_video_ops,
};
-static int s5c73m3_configure_gpios(struct s5c73m3 *state,
- const struct s5c73m3_platform_data *pdata)
+static int s5c73m3_configure_gpios(struct s5c73m3 *state)
+{
+ static const char * const gpio_names[] = {
+ "S5C73M3_STBY", "S5C73M3_RST"
+ };
+ struct i2c_client *c = state->i2c_client;
+ struct s5c73m3_gpio *g = state->gpio;
+ int ret, i;
+
+ for (i = 0; i < GPIO_NUM; ++i) {
+ unsigned int flags = GPIOF_DIR_OUT;
+ if (g[i].level)
+ flags |= GPIOF_INIT_HIGH;
+ ret = devm_gpio_request_one(&c->dev, g[i].gpio, flags,
+ gpio_names[i]);
+ if (ret) {
+ v4l2_err(c, "failed to request gpio %s\n",
+ gpio_names[i]);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int s5c73m3_parse_gpios(struct s5c73m3 *state)
+{
+ static const char * const prop_names[] = {
+ "standby-gpios", "xshutdown-gpios",
+ };
+ struct device *dev = &state->i2c_client->dev;
+ struct device_node *node = dev->of_node;
+ int ret, i;
+
+ for (i = 0; i < GPIO_NUM; ++i) {
+ enum of_gpio_flags of_flags;
+
+ ret = of_get_named_gpio_flags(node, prop_names[i],
+ 0, &of_flags);
+ if (ret < 0) {
+ dev_err(dev, "failed to parse %s DT property\n",
+ prop_names[i]);
+ return -EINVAL;
+ }
+ state->gpio[i].gpio = ret;
+ state->gpio[i].level = !(of_flags & OF_GPIO_ACTIVE_LOW);
+ }
+ return 0;
+}
+
+static int s5c73m3_get_platform_data(struct s5c73m3 *state)
{
struct device *dev = &state->i2c_client->dev;
- const struct s5c73m3_gpio *gpio;
- unsigned long flags;
+ const struct s5c73m3_platform_data *pdata = dev->platform_data;
+ struct device_node *node = dev->of_node;
+ struct device_node *node_ep;
+ struct v4l2_of_endpoint ep;
int ret;
- state->gpio[STBY].gpio = -EINVAL;
- state->gpio[RST].gpio = -EINVAL;
+ if (!node) {
+ if (!pdata) {
+ dev_err(dev, "Platform data not specified\n");
+ return -EINVAL;
+ }
- gpio = &pdata->gpio_stby;
- if (gpio_is_valid(gpio->gpio)) {
- flags = (gpio->level ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW)
- | GPIOF_EXPORT;
- ret = devm_gpio_request_one(dev, gpio->gpio, flags,
- "S5C73M3_STBY");
- if (ret < 0)
- return ret;
+ state->mclk_frequency = pdata->mclk_frequency;
+ state->gpio[STBY] = pdata->gpio_stby;
+ state->gpio[RST] = pdata->gpio_reset;
+ return 0;
+ }
- state->gpio[STBY] = *gpio;
+ if (of_property_read_u32(node, "clock-frequency",
+ &state->mclk_frequency)) {
+ state->mclk_frequency = S5C73M3_DEFAULT_MCLK_FREQ;
+ dev_info(dev, "using default %u Hz clock frequency\n",
+ state->mclk_frequency);
}
- gpio = &pdata->gpio_reset;
- if (gpio_is_valid(gpio->gpio)) {
- flags = (gpio->level ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW)
- | GPIOF_EXPORT;
- ret = devm_gpio_request_one(dev, gpio->gpio, flags,
- "S5C73M3_RST");
- if (ret < 0)
- return ret;
+ ret = s5c73m3_parse_gpios(state);
+ if (ret < 0)
+ return -EINVAL;
- state->gpio[RST] = *gpio;
+ node_ep = v4l2_of_get_next_endpoint(node, NULL);
+ if (!node_ep) {
+ dev_warn(dev, "no endpoint defined for node: %s\n",
+ node->full_name);
+ return 0;
}
+ v4l2_of_parse_endpoint(node_ep, &ep);
+ of_node_put(node_ep);
+
+ if (ep.bus_type != V4L2_MBUS_CSI2) {
+ dev_err(dev, "unsupported bus type\n");
+ return -EINVAL;
+ }
+ /*
+ * Number of MIPI CSI-2 data lanes is currently not configurable,
+ * always a default value of 4 lanes is used.
+ */
+ if (ep.bus.mipi_csi2.num_data_lanes != S5C73M3_MIPI_DATA_LANES)
+ dev_info(dev, "falling back to 4 MIPI CSI-2 data lanes\n");
+
return 0;
}
@@ -1561,21 +1639,24 @@ static int s5c73m3_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
- const struct s5c73m3_platform_data *pdata = client->dev.platform_data;
struct v4l2_subdev *sd;
struct v4l2_subdev *oif_sd;
struct s5c73m3 *state;
int ret, i;
- if (pdata == NULL) {
- dev_err(&client->dev, "Platform data not specified\n");
- return -EINVAL;
- }
-
state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
+ state->clock = devm_clk_get(dev, S5C73M3_CLK_NAME);
+ if (IS_ERR(state->clock))
+ return -EPROBE_DEFER;
+
+ state->i2c_client = client;
+ ret = s5c73m3_get_platform_data(state);
+ if (ret < 0)
+ return ret;
+
mutex_init(&state->lock);
sd = &state->sensor_sd;
oif_sd = &state->oif_sd;
@@ -1613,11 +1694,7 @@ static int s5c73m3_probe(struct i2c_client *client,
if (ret < 0)
return ret;
- state->mclk_frequency = pdata->mclk_frequency;
- state->bus_type = pdata->bus_type;
- state->i2c_client = client;
-
- ret = s5c73m3_configure_gpios(state, pdata);
+ ret = s5c73m3_configure_gpios(state);
if (ret)
goto out_err;
@@ -1651,9 +1728,29 @@ static int s5c73m3_probe(struct i2c_client *client,
if (ret < 0)
goto out_err;
+ oif_sd->dev = dev;
+
+ ret = __s5c73m3_power_on(state);
+ if (ret < 0)
+ goto out_err1;
+
+ ret = s5c73m3_get_fw_version(state);
+ __s5c73m3_power_off(state);
+
+ if (ret < 0) {
+ dev_err(dev, "Device detection failed: %d\n", ret);
+ goto out_err1;
+ }
+
+ ret = v4l2_async_register_subdev(oif_sd);
+ if (ret < 0)
+ goto out_err1;
+
v4l2_info(sd, "%s: completed succesfully\n", __func__);
return 0;
+out_err1:
+ s5c73m3_unregister_spi_driver(state);
out_err:
media_entity_cleanup(&sd->entity);
return ret;
@@ -1665,7 +1762,7 @@ static int s5c73m3_remove(struct i2c_client *client)
struct s5c73m3 *state = oif_sd_to_s5c73m3(oif_sd);
struct v4l2_subdev *sensor_sd = &state->sensor_sd;
- v4l2_device_unregister_subdev(oif_sd);
+ v4l2_async_unregister_subdev(oif_sd);
v4l2_ctrl_handler_free(oif_sd->ctrl_handler);
media_entity_cleanup(&oif_sd->entity);
@@ -1684,8 +1781,17 @@ static const struct i2c_device_id s5c73m3_id[] = {
};
MODULE_DEVICE_TABLE(i2c, s5c73m3_id);
+#ifdef CONFIG_OF
+static const struct of_device_id s5c73m3_of_match[] = {
+ { .compatible = "samsung,s5c73m3" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, s5c73m3_of_match);
+#endif
+
static struct i2c_driver s5c73m3_i2c_driver = {
.driver = {
+ .of_match_table = of_match_ptr(s5c73m3_of_match),
.name = DRIVER_NAME,
},
.probe = s5c73m3_probe,
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
index 8079e26..f60b265 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
+++ b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c
@@ -27,6 +27,11 @@
#define S5C73M3_SPI_DRV_NAME "S5C73M3-SPI"
+static const struct of_device_id s5c73m3_spi_ids[] = {
+ { .compatible = "samsung,s5c73m3" },
+ { }
+};
+
enum spi_direction {
SPI_DIR_RX,
SPI_DIR_TX
@@ -146,6 +151,7 @@ int s5c73m3_register_spi_driver(struct s5c73m3 *state)
spidrv->driver.name = S5C73M3_SPI_DRV_NAME;
spidrv->driver.bus = &spi_bus_type;
spidrv->driver.owner = THIS_MODULE;
+ spidrv->driver.of_match_table = s5c73m3_spi_ids;
return spi_register_driver(spidrv);
}
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h
index 9d2c086..2917857 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3.h
+++ b/drivers/media/i2c/s5c73m3/s5c73m3.h
@@ -17,6 +17,7 @@
#ifndef S5C73M3_H_
#define S5C73M3_H_
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/regulator/consumer.h>
#include <media/v4l2-common.h>
@@ -321,6 +322,7 @@ enum s5c73m3_oif_pads {
#define S5C73M3_MAX_SUPPLIES 6
+#define S5C73M3_DEFAULT_MCLK_FREQ 24000000U
struct s5c73m3_ctrls {
struct v4l2_ctrl_handler handler;
@@ -391,6 +393,8 @@ struct s5c73m3 {
struct regulator_bulk_data supplies[S5C73M3_MAX_SUPPLIES];
struct s5c73m3_gpio gpio[GPIO_NUM];
+ struct clk *clock;
+
/* External master clock frequency */
u32 mclk_frequency;
/* Video bus type - MIPI-CSI2/paralell */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 2/7] V4L: s5k6a3: Add DT binding documentation
2013-08-28 15:55 ` Sylwester Nawrocki
@ 2013-08-28 15:55 ` Sylwester Nawrocki
-1 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-media
Cc: mturquette, g.liakhovetski, laurent.pinchart, arun.kk, hverkuil,
sakari.ailus, a.hajda, kyungmin.park, t.figa, linux-arm-kernel,
Sylwester Nawrocki
This patch adds binding documentation for the Samsung S5K6A3(YX)
raw image sensor.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
The binding of this sensors shows some issue in the generic video-interfaces
binding. Namely The video bus type (serial MIPI CSI-2, parallel ITU-R BT.656,
etc.) is being determined by the binding parser (v4l2-of.c) depending on what
properties are found in an enddpoint node.
Please have a look at the data-lanes property description. The sensor supports
MIPI CSI-2 and SMIA CCP2 interfaces which both use one data lane. One data lane
is everything this sensors supports. During our discussions on the generic
bidings in the past I proposed to introduce a property in the endpoint node
that would indicate what bus type (standard/protocol) is used, e.g. MIPI CSI-2,
ITU-R BT.656, SMIA CCP2, etc. It was argued though that we can well determine
bus type based on properties found in the endpoint node.
So now in case of this sensor I'm not sure how it can be differentiated
whether MIPI CSI-2 or CCP2 bus is used. There is no CCP2 specific generic
properties yet. Anyway I'm not really happy there is no property like bus_type
that would clearly indicate what data bus type is used. Then would would for
instance not specify "data-lanes" in endpoint node just to differentiate
between MIPI CSI-2 and the parallel busses.
The main issue for this particular binding is that even with data-lanes = <1>;
it is still impossible to figure out whether MIPI CSI-2 or SMIA CCP2 data bus
is used.
So how about introducing, e.g. a string type "bus_type" common property ?
I'm considering starting a separate thread for discussing this.
---
.../devicetree/bindings/media/samsung-s5k6a3.txt | 31 ++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
new file mode 100644
index 0000000..a51fbe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
@@ -0,0 +1,31 @@
+Samsung S5K6A3(YX) raw image sensor
+---------------------------------
+
+S5K6A3YX is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
+and CCI (I2C compatible) control bus.
+
+Required properties:
+
+- compatible : "samsung,s5k6a3yx";
+- reg : I2C slave address of the sensor;
+- svdda-supply : core voltage supply;
+- svddio-supply : I/O voltage supply;
+- gpios : specifier of a GPIO connected to the RESET pin;
+- clocks : should contain the sensor's EXTCLK clock specifier, from
+ the common clock bindings.
+- clock-names : should contain "extclk" entry;
+
+Optional properties:
+
+- clock-frequency : the frequency at which the "extclk" clock should be
+ configured to operate, in Hz; if this property is not
+ specified default 24 MHz value will be used.
+
+The common video interfaces bindings (see video-interfaces.txt) should be
+used to specify link to the image data receiver. The S5K6A3(YX) device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Following properties are valid for the endpoint node:
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+ video-interfaces.txt. The sensor supports only one data lane.
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 2/7] V4L: s5k6a3: Add DT binding documentation
@ 2013-08-28 15:55 ` Sylwester Nawrocki
0 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds binding documentation for the Samsung S5K6A3(YX)
raw image sensor.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
The binding of this sensors shows some issue in the generic video-interfaces
binding. Namely The video bus type (serial MIPI CSI-2, parallel ITU-R BT.656,
etc.) is being determined by the binding parser (v4l2-of.c) depending on what
properties are found in an enddpoint node.
Please have a look at the data-lanes property description. The sensor supports
MIPI CSI-2 and SMIA CCP2 interfaces which both use one data lane. One data lane
is everything this sensors supports. During our discussions on the generic
bidings in the past I proposed to introduce a property in the endpoint node
that would indicate what bus type (standard/protocol) is used, e.g. MIPI CSI-2,
ITU-R BT.656, SMIA CCP2, etc. It was argued though that we can well determine
bus type based on properties found in the endpoint node.
So now in case of this sensor I'm not sure how it can be differentiated
whether MIPI CSI-2 or CCP2 bus is used. There is no CCP2 specific generic
properties yet. Anyway I'm not really happy there is no property like bus_type
that would clearly indicate what data bus type is used. Then would would for
instance not specify "data-lanes" in endpoint node just to differentiate
between MIPI CSI-2 and the parallel busses.
The main issue for this particular binding is that even with data-lanes = <1>;
it is still impossible to figure out whether MIPI CSI-2 or SMIA CCP2 data bus
is used.
So how about introducing, e.g. a string type "bus_type" common property ?
I'm considering starting a separate thread for discussing this.
---
.../devicetree/bindings/media/samsung-s5k6a3.txt | 31 ++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
new file mode 100644
index 0000000..a51fbe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
@@ -0,0 +1,31 @@
+Samsung S5K6A3(YX) raw image sensor
+---------------------------------
+
+S5K6A3YX is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
+and CCI (I2C compatible) control bus.
+
+Required properties:
+
+- compatible : "samsung,s5k6a3yx";
+- reg : I2C slave address of the sensor;
+- svdda-supply : core voltage supply;
+- svddio-supply : I/O voltage supply;
+- gpios : specifier of a GPIO connected to the RESET pin;
+- clocks : should contain the sensor's EXTCLK clock specifier, from
+ the common clock bindings.
+- clock-names : should contain "extclk" entry;
+
+Optional properties:
+
+- clock-frequency : the frequency at which the "extclk" clock should be
+ configured to operate, in Hz; if this property is not
+ specified default 24 MHz value will be used.
+
+The common video interfaces bindings (see video-interfaces.txt) should be
+used to specify link to the image data receiver. The S5K6A3(YX) device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Following properties are valid for the endpoint node:
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+ video-interfaces.txt. The sensor supports only one data lane.
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 3/7] V4L: Add driver for s5k6a3 image sensor
2013-08-28 15:55 ` Sylwester Nawrocki
@ 2013-08-28 15:55 ` Sylwester Nawrocki
-1 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-media
Cc: mturquette, g.liakhovetski, laurent.pinchart, arun.kk, hverkuil,
sakari.ailus, a.hajda, kyungmin.park, t.figa, linux-arm-kernel,
Sylwester Nawrocki
This patch adds subdev driver for Samsung S5K6A3 raw image sensor.
As it is intended at the moment to be used only with the Exynos
FIMC-IS (camera ISP) subsystem it is a pretty minimal subdev driver.
It doesn't do any I2C communication since the sensor is controlled
by the ISP and its own firmware.
This driver can be updated in future, should anyone need it to be
a regular subdev driver where the main CPU communicates with the
sensor directly.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
Changes since v1:
- added missing pm_runtime_disable(),
- removed subdev name overriding,
- s/S5K6A3_DEF_PIX/S5K6A3_DEFAULT_
---
drivers/media/i2c/Kconfig | 8 ++
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/s5k6a3.c | 324 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 333 insertions(+)
create mode 100644 drivers/media/i2c/s5k6a3.c
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index d18be19..c3619a5 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -587,6 +587,14 @@ config VIDEO_S5K6AA
This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
camera sensor with an embedded SoC image signal processor.
+config VIDEO_S5K6A3
+ tristate "Samsung S5K6A3 sensor support"
+ depends on MEDIA_CAMERA_SUPPORT
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF
+ ---help---
+ This is a V4L2 sensor-level driver for Samsung S5K6A3 raw
+ camera sensor.
+
config VIDEO_S5K4ECGX
tristate "Samsung S5K4ECGX sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 9f462df..e7be364 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o
obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o
+obj-$(CONFIG_VIDEO_S5K6A3) += s5k6a3.o
obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o
obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/
obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c
new file mode 100644
index 0000000..ba86e24
--- /dev/null
+++ b/drivers/media/i2c/s5k6a3.c
@@ -0,0 +1,324 @@
+/*
+ * Samsung S5K6A3 image sensor driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-subdev.h>
+
+#define S5K6A3_SENSOR_MAX_WIDTH 1392
+#define S5K6A3_SENSOR_MAX_HEIGHT 1392
+#define S5K6A3_SENSOR_MIN_WIDTH 32
+#define S5K6A3_SENSOR_MIN_HEIGHT 32
+
+#define S5K6A3_DEFAULT_WIDTH 1296
+#define S5K6A3_DEFAULT_HEIGHT 732
+
+#define S5K6A3_DRV_NAME "S5K6A3"
+#define S5K6A3_DEFAULT_CLK_FREQ 24000000U
+
+#define S5K6A3_NUM_SUPPLIES 2
+
+/**
+ * struct s5k6a3 - fimc-is sensor data structure
+ * @dev: pointer to this I2C client device structure
+ * @subdev: the image sensor's v4l2 subdev
+ * @pad: subdev media source pad
+ * @supplies: image sensor's voltage regulator supplies
+ * @gpio_reset: GPIO connected to the sensor's reset pin
+ * @lock: mutex protecting the structure's members below
+ * @format: media bus format at the sensor's source pad
+ */
+struct s5k6a3 {
+ struct device *dev;
+ struct v4l2_subdev subdev;
+ struct media_pad pad;
+ struct regulator_bulk_data supplies[S5K6A3_NUM_SUPPLIES];
+ int gpio_reset;
+ struct mutex lock;
+ struct v4l2_mbus_framefmt format;
+ u32 clock_frequency;
+};
+
+static const char * const s5k6a3_supply_names[] = {
+ "svdda",
+ "svddio"
+};
+
+static inline struct s5k6a3 *sd_to_s5k6a3(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct s5k6a3, subdev);
+}
+
+static const struct v4l2_mbus_framefmt s5k6a3_formats[] = {
+ {
+ .code = V4L2_MBUS_FMT_SGRBG10_1X10,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .field = V4L2_FIELD_NONE,
+ }
+};
+
+static const struct v4l2_mbus_framefmt *find_sensor_format(
+ struct v4l2_mbus_framefmt *mf)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(s5k6a3_formats); i++)
+ if (mf->code == s5k6a3_formats[i].code)
+ return &s5k6a3_formats[i];
+
+ return &s5k6a3_formats[0];
+}
+
+static int s5k6a3_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index >= ARRAY_SIZE(s5k6a3_formats))
+ return -EINVAL;
+
+ code->code = s5k6a3_formats[code->index].code;
+ return 0;
+}
+
+static void s5k6a3_try_format(struct v4l2_mbus_framefmt *mf)
+{
+ const struct v4l2_mbus_framefmt *fmt;
+
+ fmt = find_sensor_format(mf);
+ mf->code = fmt->code;
+ v4l_bound_align_image(&mf->width, S5K6A3_SENSOR_MIN_WIDTH,
+ S5K6A3_SENSOR_MAX_WIDTH, 0,
+ &mf->height, S5K6A3_SENSOR_MIN_HEIGHT,
+ S5K6A3_SENSOR_MAX_HEIGHT, 0, 0);
+}
+
+static struct v4l2_mbus_framefmt *__s5k6a3_get_format(
+ struct s5k6a3 *sensor, struct v4l2_subdev_fh *fh,
+ u32 pad, enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return fh ? v4l2_subdev_get_try_format(fh, pad) : NULL;
+
+ return &sensor->format;
+}
+
+static int s5k6a3_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
+ struct v4l2_mbus_framefmt *mf;
+
+ s5k6a3_try_format(&fmt->format);
+
+ mf = __s5k6a3_get_format(sensor, fh, fmt->pad, fmt->which);
+ if (mf) {
+ mutex_lock(&sensor->lock);
+ if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ *mf = fmt->format;
+ mutex_unlock(&sensor->lock);
+ }
+ return 0;
+}
+
+static int s5k6a3_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
+ struct v4l2_mbus_framefmt *mf;
+
+ mf = __s5k6a3_get_format(sensor, fh, fmt->pad, fmt->which);
+
+ mutex_lock(&sensor->lock);
+ fmt->format = *mf;
+ mutex_unlock(&sensor->lock);
+ return 0;
+}
+
+static struct v4l2_subdev_pad_ops s5k6a3_pad_ops = {
+ .enum_mbus_code = s5k6a3_enum_mbus_code,
+ .get_fmt = s5k6a3_get_fmt,
+ .set_fmt = s5k6a3_set_fmt,
+};
+
+static int s5k6a3_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
+
+ *format = s5k6a3_formats[0];
+ format->width = S5K6A3_DEFAULT_WIDTH;
+ format->height = S5K6A3_DEFAULT_HEIGHT;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_internal_ops s5k6a3_sd_internal_ops = {
+ .open = s5k6a3_open,
+};
+
+static int s5k6a3_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
+ int gpio = sensor->gpio_reset;
+ int ret;
+
+ if (on) {
+ ret = pm_runtime_get(sensor->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = regulator_bulk_enable(S5K6A3_NUM_SUPPLIES,
+ sensor->supplies);
+ if (ret < 0) {
+ pm_runtime_put(sensor->dev);
+ return ret;
+ }
+
+ if (gpio_is_valid(gpio)) {
+ gpio_set_value(gpio, 1);
+ usleep_range(600, 800);
+ gpio_set_value(gpio, 0);
+ usleep_range(10000, 11000);
+ gpio_set_value(gpio, 1);
+ }
+
+ /* Delay needed for the sensor initialization */
+ msleep(20);
+ } else {
+ if (gpio_is_valid(gpio))
+ gpio_set_value(gpio, 0);
+
+ ret = regulator_bulk_disable(S5K6A3_NUM_SUPPLIES,
+ sensor->supplies);
+ if (!ret)
+ pm_runtime_put(sensor->dev);
+ }
+ return ret;
+}
+
+static struct v4l2_subdev_core_ops s5k6a3_core_ops = {
+ .s_power = s5k6a3_s_power,
+};
+
+static struct v4l2_subdev_ops s5k6a3_subdev_ops = {
+ .core = &s5k6a3_core_ops,
+ .pad = &s5k6a3_pad_ops,
+};
+
+static int s5k6a3_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct s5k6a3 *sensor;
+ struct v4l2_subdev *sd;
+ int gpio, i, ret;
+
+ sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
+ if (!sensor)
+ return -ENOMEM;
+
+ mutex_init(&sensor->lock);
+ sensor->gpio_reset = -EINVAL;
+ sensor->dev = dev;
+
+ gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
+ if (gpio_is_valid(gpio)) {
+ ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW,
+ S5K6A3_DRV_NAME);
+ if (ret < 0)
+ return ret;
+ }
+ sensor->gpio_reset = gpio;
+
+ if (of_property_read_u32(dev->of_node, "clock-frequency",
+ &sensor->clock_frequency)) {
+ sensor->clock_frequency = S5K6A3_DEFAULT_CLK_FREQ;
+ dev_info(dev, "using default %u Hz clock frequency\n",
+ sensor->clock_frequency);
+ }
+
+ for (i = 0; i < S5K6A3_NUM_SUPPLIES; i++)
+ sensor->supplies[i].supply = s5k6a3_supply_names[i];
+
+ ret = devm_regulator_bulk_get(&client->dev, S5K6A3_NUM_SUPPLIES,
+ sensor->supplies);
+ if (ret < 0)
+ return ret;
+
+ sd = &sensor->subdev;
+ v4l2_i2c_subdev_init(sd, client, &s5k6a3_subdev_ops);
+ sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ sensor->format.code = s5k6a3_formats[0].code;
+ sensor->format.width = S5K6A3_DEFAULT_WIDTH;
+ sensor->format.height = S5K6A3_DEFAULT_HEIGHT;
+
+ sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0);
+ if (ret < 0)
+ return ret;
+
+ pm_runtime_no_callbacks(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+
+static int s5k6a3_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ pm_runtime_disable(&client->dev);
+ media_entity_cleanup(&sd->entity);
+ return 0;
+}
+
+static const struct i2c_device_id s5k6a3_ids[] = {
+ { }
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id s5k6a3_of_match[] = {
+ { .compatible = "samsung,s5k6a3" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, s5k6a3_of_match);
+#endif
+
+static struct i2c_driver s5k6a3_driver = {
+ .driver = {
+ .of_match_table = of_match_ptr(s5k6a3_of_match),
+ .name = S5K6A3_DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = s5k6a3_probe,
+ .remove = s5k6a3_remove,
+ .id_table = s5k6a3_ids,
+};
+
+module_i2c_driver(s5k6a3_driver);
+
+MODULE_DESCRIPTION("S5K6A3 image sensor subdev driver");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 3/7] V4L: Add driver for s5k6a3 image sensor
@ 2013-08-28 15:55 ` Sylwester Nawrocki
0 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds subdev driver for Samsung S5K6A3 raw image sensor.
As it is intended at the moment to be used only with the Exynos
FIMC-IS (camera ISP) subsystem it is a pretty minimal subdev driver.
It doesn't do any I2C communication since the sensor is controlled
by the ISP and its own firmware.
This driver can be updated in future, should anyone need it to be
a regular subdev driver where the main CPU communicates with the
sensor directly.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
Changes since v1:
- added missing pm_runtime_disable(),
- removed subdev name overriding,
- s/S5K6A3_DEF_PIX/S5K6A3_DEFAULT_
---
drivers/media/i2c/Kconfig | 8 ++
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/s5k6a3.c | 324 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 333 insertions(+)
create mode 100644 drivers/media/i2c/s5k6a3.c
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index d18be19..c3619a5 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -587,6 +587,14 @@ config VIDEO_S5K6AA
This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
camera sensor with an embedded SoC image signal processor.
+config VIDEO_S5K6A3
+ tristate "Samsung S5K6A3 sensor support"
+ depends on MEDIA_CAMERA_SUPPORT
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF
+ ---help---
+ This is a V4L2 sensor-level driver for Samsung S5K6A3 raw
+ camera sensor.
+
config VIDEO_S5K4ECGX
tristate "Samsung S5K4ECGX sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 9f462df..e7be364 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o
obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o
+obj-$(CONFIG_VIDEO_S5K6A3) += s5k6a3.o
obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o
obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/
obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c
new file mode 100644
index 0000000..ba86e24
--- /dev/null
+++ b/drivers/media/i2c/s5k6a3.c
@@ -0,0 +1,324 @@
+/*
+ * Samsung S5K6A3 image sensor driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-subdev.h>
+
+#define S5K6A3_SENSOR_MAX_WIDTH 1392
+#define S5K6A3_SENSOR_MAX_HEIGHT 1392
+#define S5K6A3_SENSOR_MIN_WIDTH 32
+#define S5K6A3_SENSOR_MIN_HEIGHT 32
+
+#define S5K6A3_DEFAULT_WIDTH 1296
+#define S5K6A3_DEFAULT_HEIGHT 732
+
+#define S5K6A3_DRV_NAME "S5K6A3"
+#define S5K6A3_DEFAULT_CLK_FREQ 24000000U
+
+#define S5K6A3_NUM_SUPPLIES 2
+
+/**
+ * struct s5k6a3 - fimc-is sensor data structure
+ * @dev: pointer to this I2C client device structure
+ * @subdev: the image sensor's v4l2 subdev
+ * @pad: subdev media source pad
+ * @supplies: image sensor's voltage regulator supplies
+ * @gpio_reset: GPIO connected to the sensor's reset pin
+ * @lock: mutex protecting the structure's members below
+ * @format: media bus format at the sensor's source pad
+ */
+struct s5k6a3 {
+ struct device *dev;
+ struct v4l2_subdev subdev;
+ struct media_pad pad;
+ struct regulator_bulk_data supplies[S5K6A3_NUM_SUPPLIES];
+ int gpio_reset;
+ struct mutex lock;
+ struct v4l2_mbus_framefmt format;
+ u32 clock_frequency;
+};
+
+static const char * const s5k6a3_supply_names[] = {
+ "svdda",
+ "svddio"
+};
+
+static inline struct s5k6a3 *sd_to_s5k6a3(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct s5k6a3, subdev);
+}
+
+static const struct v4l2_mbus_framefmt s5k6a3_formats[] = {
+ {
+ .code = V4L2_MBUS_FMT_SGRBG10_1X10,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .field = V4L2_FIELD_NONE,
+ }
+};
+
+static const struct v4l2_mbus_framefmt *find_sensor_format(
+ struct v4l2_mbus_framefmt *mf)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(s5k6a3_formats); i++)
+ if (mf->code == s5k6a3_formats[i].code)
+ return &s5k6a3_formats[i];
+
+ return &s5k6a3_formats[0];
+}
+
+static int s5k6a3_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index >= ARRAY_SIZE(s5k6a3_formats))
+ return -EINVAL;
+
+ code->code = s5k6a3_formats[code->index].code;
+ return 0;
+}
+
+static void s5k6a3_try_format(struct v4l2_mbus_framefmt *mf)
+{
+ const struct v4l2_mbus_framefmt *fmt;
+
+ fmt = find_sensor_format(mf);
+ mf->code = fmt->code;
+ v4l_bound_align_image(&mf->width, S5K6A3_SENSOR_MIN_WIDTH,
+ S5K6A3_SENSOR_MAX_WIDTH, 0,
+ &mf->height, S5K6A3_SENSOR_MIN_HEIGHT,
+ S5K6A3_SENSOR_MAX_HEIGHT, 0, 0);
+}
+
+static struct v4l2_mbus_framefmt *__s5k6a3_get_format(
+ struct s5k6a3 *sensor, struct v4l2_subdev_fh *fh,
+ u32 pad, enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return fh ? v4l2_subdev_get_try_format(fh, pad) : NULL;
+
+ return &sensor->format;
+}
+
+static int s5k6a3_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
+ struct v4l2_mbus_framefmt *mf;
+
+ s5k6a3_try_format(&fmt->format);
+
+ mf = __s5k6a3_get_format(sensor, fh, fmt->pad, fmt->which);
+ if (mf) {
+ mutex_lock(&sensor->lock);
+ if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ *mf = fmt->format;
+ mutex_unlock(&sensor->lock);
+ }
+ return 0;
+}
+
+static int s5k6a3_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
+ struct v4l2_mbus_framefmt *mf;
+
+ mf = __s5k6a3_get_format(sensor, fh, fmt->pad, fmt->which);
+
+ mutex_lock(&sensor->lock);
+ fmt->format = *mf;
+ mutex_unlock(&sensor->lock);
+ return 0;
+}
+
+static struct v4l2_subdev_pad_ops s5k6a3_pad_ops = {
+ .enum_mbus_code = s5k6a3_enum_mbus_code,
+ .get_fmt = s5k6a3_get_fmt,
+ .set_fmt = s5k6a3_set_fmt,
+};
+
+static int s5k6a3_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
+
+ *format = s5k6a3_formats[0];
+ format->width = S5K6A3_DEFAULT_WIDTH;
+ format->height = S5K6A3_DEFAULT_HEIGHT;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_internal_ops s5k6a3_sd_internal_ops = {
+ .open = s5k6a3_open,
+};
+
+static int s5k6a3_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
+ int gpio = sensor->gpio_reset;
+ int ret;
+
+ if (on) {
+ ret = pm_runtime_get(sensor->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = regulator_bulk_enable(S5K6A3_NUM_SUPPLIES,
+ sensor->supplies);
+ if (ret < 0) {
+ pm_runtime_put(sensor->dev);
+ return ret;
+ }
+
+ if (gpio_is_valid(gpio)) {
+ gpio_set_value(gpio, 1);
+ usleep_range(600, 800);
+ gpio_set_value(gpio, 0);
+ usleep_range(10000, 11000);
+ gpio_set_value(gpio, 1);
+ }
+
+ /* Delay needed for the sensor initialization */
+ msleep(20);
+ } else {
+ if (gpio_is_valid(gpio))
+ gpio_set_value(gpio, 0);
+
+ ret = regulator_bulk_disable(S5K6A3_NUM_SUPPLIES,
+ sensor->supplies);
+ if (!ret)
+ pm_runtime_put(sensor->dev);
+ }
+ return ret;
+}
+
+static struct v4l2_subdev_core_ops s5k6a3_core_ops = {
+ .s_power = s5k6a3_s_power,
+};
+
+static struct v4l2_subdev_ops s5k6a3_subdev_ops = {
+ .core = &s5k6a3_core_ops,
+ .pad = &s5k6a3_pad_ops,
+};
+
+static int s5k6a3_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct s5k6a3 *sensor;
+ struct v4l2_subdev *sd;
+ int gpio, i, ret;
+
+ sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
+ if (!sensor)
+ return -ENOMEM;
+
+ mutex_init(&sensor->lock);
+ sensor->gpio_reset = -EINVAL;
+ sensor->dev = dev;
+
+ gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
+ if (gpio_is_valid(gpio)) {
+ ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW,
+ S5K6A3_DRV_NAME);
+ if (ret < 0)
+ return ret;
+ }
+ sensor->gpio_reset = gpio;
+
+ if (of_property_read_u32(dev->of_node, "clock-frequency",
+ &sensor->clock_frequency)) {
+ sensor->clock_frequency = S5K6A3_DEFAULT_CLK_FREQ;
+ dev_info(dev, "using default %u Hz clock frequency\n",
+ sensor->clock_frequency);
+ }
+
+ for (i = 0; i < S5K6A3_NUM_SUPPLIES; i++)
+ sensor->supplies[i].supply = s5k6a3_supply_names[i];
+
+ ret = devm_regulator_bulk_get(&client->dev, S5K6A3_NUM_SUPPLIES,
+ sensor->supplies);
+ if (ret < 0)
+ return ret;
+
+ sd = &sensor->subdev;
+ v4l2_i2c_subdev_init(sd, client, &s5k6a3_subdev_ops);
+ sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ sensor->format.code = s5k6a3_formats[0].code;
+ sensor->format.width = S5K6A3_DEFAULT_WIDTH;
+ sensor->format.height = S5K6A3_DEFAULT_HEIGHT;
+
+ sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0);
+ if (ret < 0)
+ return ret;
+
+ pm_runtime_no_callbacks(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+
+static int s5k6a3_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ pm_runtime_disable(&client->dev);
+ media_entity_cleanup(&sd->entity);
+ return 0;
+}
+
+static const struct i2c_device_id s5k6a3_ids[] = {
+ { }
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id s5k6a3_of_match[] = {
+ { .compatible = "samsung,s5k6a3" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, s5k6a3_of_match);
+#endif
+
+static struct i2c_driver s5k6a3_driver = {
+ .driver = {
+ .of_match_table = of_match_ptr(s5k6a3_of_match),
+ .name = S5K6A3_DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = s5k6a3_probe,
+ .remove = s5k6a3_remove,
+ .id_table = s5k6a3_ids,
+};
+
+module_i2c_driver(s5k6a3_driver);
+
+MODULE_DESCRIPTION("S5K6A3 image sensor subdev driver");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 4/7] V4L: s5k6a3: Add support for asynchronous subdev registration
2013-08-28 15:55 ` Sylwester Nawrocki
@ 2013-08-28 15:55 ` Sylwester Nawrocki
-1 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-media
Cc: mturquette, g.liakhovetski, laurent.pinchart, arun.kk, hverkuil,
sakari.ailus, a.hajda, kyungmin.park, t.figa, linux-arm-kernel,
Sylwester Nawrocki
This patch converts the driver to use v4l2 asynchronous subdev
registration API an the clock API to control the external master
clock directly.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/media/i2c/s5k6a3.c | 36 ++++++++++++++++++++++++++----------
1 file changed, 26 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c
index ba86e24..f65a4f8 100644
--- a/drivers/media/i2c/s5k6a3.c
+++ b/drivers/media/i2c/s5k6a3.c
@@ -34,6 +34,7 @@
#define S5K6A3_DEFAULT_HEIGHT 732
#define S5K6A3_DRV_NAME "S5K6A3"
+#define S5K6A3_CLK_NAME "extclk"
#define S5K6A3_DEFAULT_CLK_FREQ 24000000U
#define S5K6A3_NUM_SUPPLIES 2
@@ -56,6 +57,7 @@ struct s5k6a3 {
int gpio_reset;
struct mutex lock;
struct v4l2_mbus_framefmt format;
+ struct clk *clock;
u32 clock_frequency;
};
@@ -181,19 +183,25 @@ static int s5k6a3_s_power(struct v4l2_subdev *sd, int on)
{
struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
int gpio = sensor->gpio_reset;
- int ret;
+ int ret = 0;
if (on) {
+ ret = clk_set_rate(sensor->clock, sensor->clock_frequency);
+ if (ret < 0)
+ return ret;
+
ret = pm_runtime_get(sensor->dev);
if (ret < 0)
return ret;
ret = regulator_bulk_enable(S5K6A3_NUM_SUPPLIES,
sensor->supplies);
- if (ret < 0) {
- pm_runtime_put(sensor->dev);
- return ret;
- }
+ if (ret < 0)
+ goto rpm_put;
+
+ ret = clk_prepare_enable(sensor->clock);
+ if (ret < 0)
+ goto reg_dis;
if (gpio_is_valid(gpio)) {
gpio_set_value(gpio, 1);
@@ -209,10 +217,12 @@ static int s5k6a3_s_power(struct v4l2_subdev *sd, int on)
if (gpio_is_valid(gpio))
gpio_set_value(gpio, 0);
- ret = regulator_bulk_disable(S5K6A3_NUM_SUPPLIES,
- sensor->supplies);
- if (!ret)
- pm_runtime_put(sensor->dev);
+ clk_disable_unprepare(sensor->clock);
+reg_dis:
+ regulator_bulk_disable(S5K6A3_NUM_SUPPLIES,
+ sensor->supplies);
+rpm_put:
+ pm_runtime_put(sensor->dev);
}
return ret;
}
@@ -240,6 +250,7 @@ static int s5k6a3_probe(struct i2c_client *client,
mutex_init(&sensor->lock);
sensor->gpio_reset = -EINVAL;
+ sensor->clock = ERR_PTR(-EINVAL);
sensor->dev = dev;
gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
@@ -266,6 +277,10 @@ static int s5k6a3_probe(struct i2c_client *client,
if (ret < 0)
return ret;
+ sensor->clock = devm_clk_get(dev, S5K6A3_CLK_NAME);
+ if (IS_ERR(sensor->clock))
+ return -EPROBE_DEFER;
+
sd = &sensor->subdev;
v4l2_i2c_subdev_init(sd, client, &s5k6a3_subdev_ops);
sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
@@ -282,7 +297,7 @@ static int s5k6a3_probe(struct i2c_client *client,
pm_runtime_no_callbacks(dev);
pm_runtime_enable(dev);
- return 0;
+ return v4l2_async_register_subdev(sd);
}
static int s5k6a3_remove(struct i2c_client *client)
@@ -290,6 +305,7 @@ static int s5k6a3_remove(struct i2c_client *client)
struct v4l2_subdev *sd = i2c_get_clientdata(client);
pm_runtime_disable(&client->dev);
+ v4l2_async_unregister_subdev(sd);
media_entity_cleanup(&sd->entity);
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 4/7] V4L: s5k6a3: Add support for asynchronous subdev registration
@ 2013-08-28 15:55 ` Sylwester Nawrocki
0 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-arm-kernel
This patch converts the driver to use v4l2 asynchronous subdev
registration API an the clock API to control the external master
clock directly.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/media/i2c/s5k6a3.c | 36 ++++++++++++++++++++++++++----------
1 file changed, 26 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c
index ba86e24..f65a4f8 100644
--- a/drivers/media/i2c/s5k6a3.c
+++ b/drivers/media/i2c/s5k6a3.c
@@ -34,6 +34,7 @@
#define S5K6A3_DEFAULT_HEIGHT 732
#define S5K6A3_DRV_NAME "S5K6A3"
+#define S5K6A3_CLK_NAME "extclk"
#define S5K6A3_DEFAULT_CLK_FREQ 24000000U
#define S5K6A3_NUM_SUPPLIES 2
@@ -56,6 +57,7 @@ struct s5k6a3 {
int gpio_reset;
struct mutex lock;
struct v4l2_mbus_framefmt format;
+ struct clk *clock;
u32 clock_frequency;
};
@@ -181,19 +183,25 @@ static int s5k6a3_s_power(struct v4l2_subdev *sd, int on)
{
struct s5k6a3 *sensor = sd_to_s5k6a3(sd);
int gpio = sensor->gpio_reset;
- int ret;
+ int ret = 0;
if (on) {
+ ret = clk_set_rate(sensor->clock, sensor->clock_frequency);
+ if (ret < 0)
+ return ret;
+
ret = pm_runtime_get(sensor->dev);
if (ret < 0)
return ret;
ret = regulator_bulk_enable(S5K6A3_NUM_SUPPLIES,
sensor->supplies);
- if (ret < 0) {
- pm_runtime_put(sensor->dev);
- return ret;
- }
+ if (ret < 0)
+ goto rpm_put;
+
+ ret = clk_prepare_enable(sensor->clock);
+ if (ret < 0)
+ goto reg_dis;
if (gpio_is_valid(gpio)) {
gpio_set_value(gpio, 1);
@@ -209,10 +217,12 @@ static int s5k6a3_s_power(struct v4l2_subdev *sd, int on)
if (gpio_is_valid(gpio))
gpio_set_value(gpio, 0);
- ret = regulator_bulk_disable(S5K6A3_NUM_SUPPLIES,
- sensor->supplies);
- if (!ret)
- pm_runtime_put(sensor->dev);
+ clk_disable_unprepare(sensor->clock);
+reg_dis:
+ regulator_bulk_disable(S5K6A3_NUM_SUPPLIES,
+ sensor->supplies);
+rpm_put:
+ pm_runtime_put(sensor->dev);
}
return ret;
}
@@ -240,6 +250,7 @@ static int s5k6a3_probe(struct i2c_client *client,
mutex_init(&sensor->lock);
sensor->gpio_reset = -EINVAL;
+ sensor->clock = ERR_PTR(-EINVAL);
sensor->dev = dev;
gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
@@ -266,6 +277,10 @@ static int s5k6a3_probe(struct i2c_client *client,
if (ret < 0)
return ret;
+ sensor->clock = devm_clk_get(dev, S5K6A3_CLK_NAME);
+ if (IS_ERR(sensor->clock))
+ return -EPROBE_DEFER;
+
sd = &sensor->subdev;
v4l2_i2c_subdev_init(sd, client, &s5k6a3_subdev_ops);
sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
@@ -282,7 +297,7 @@ static int s5k6a3_probe(struct i2c_client *client,
pm_runtime_no_callbacks(dev);
pm_runtime_enable(dev);
- return 0;
+ return v4l2_async_register_subdev(sd);
}
static int s5k6a3_remove(struct i2c_client *client)
@@ -290,6 +305,7 @@ static int s5k6a3_remove(struct i2c_client *client)
struct v4l2_subdev *sd = i2c_get_clientdata(client);
pm_runtime_disable(&client->dev);
+ v4l2_async_unregister_subdev(sd);
media_entity_cleanup(&sd->entity);
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 5/7] exynos4-is: Add clock provider for the external clocks
2013-08-28 15:55 ` Sylwester Nawrocki
@ 2013-08-28 15:55 ` Sylwester Nawrocki
-1 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-media
Cc: mturquette, g.liakhovetski, laurent.pinchart, arun.kk, hverkuil,
sakari.ailus, a.hajda, kyungmin.park, t.figa, linux-arm-kernel,
Sylwester Nawrocki
This patch adds clock provider to expose the sclk_cam0/1 clocks
for image sensor subdevs.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
.../devicetree/bindings/media/samsung-fimc.txt | 17 ++-
drivers/media/platform/exynos4-is/media-dev.c | 115 ++++++++++++++++++++
drivers/media/platform/exynos4-is/media-dev.h | 18 ++-
3 files changed, 147 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
index 96312f6..9f4d295 100644
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -91,6 +91,15 @@ Optional properties
- samsung,camclk-out : specifies clock output for remote sensor,
0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
+'clock-controller' node (optional)
+----------------------------------
+
+The purpose of this node is to define a clock provider for external image
+sensors and link any of the CAM_?_CLKOUT clock outputs with related external
+clock consumer device. Properties specific to this node are described in
+../clock/clock-bindings.txt.
+
+
Image sensor nodes
------------------
@@ -114,7 +123,7 @@ Example:
vddio-supply = <...>;
clock-frequency = <24000000>;
- clocks = <...>;
+ clocks = <&camclk 1>;
clock-names = "mclk";
port {
@@ -135,7 +144,7 @@ Example:
vddio-supply = <...>;
clock-frequency = <24000000>;
- clocks = <...>;
+ clocks = <&camclk 0>;
clock-names = "mclk";
port {
@@ -156,6 +165,10 @@ Example:
pinctrl-names = "default";
pinctrl-0 = <&cam_port_a_clk_active>;
+ camclk: clock-controller {
+ #clock-cells = <1>;
+ };
+
/* parallel camera ports */
parallel-ports {
/* camera A input */
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index e327f45..6fba5f6 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -11,6 +11,8 @@
*/
#include <linux/bug.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/i2c.h>
@@ -1438,6 +1440,108 @@ static int fimc_md_get_pinctrl(struct fimc_md *fmd)
return 0;
}
+#ifdef CONFIG_OF
+static int cam_clk_prepare(struct clk_hw *hw)
+{
+ struct cam_clk *camclk = to_cam_clk(hw);
+ int ret;
+
+ if (camclk->fmd->pmf == NULL)
+ return -ENODEV;
+
+ ret = pm_runtime_get_sync(camclk->fmd->pmf);
+ return ret < 0 ? ret : 0;
+}
+
+static void cam_clk_unprepare(struct clk_hw *hw)
+{
+ struct cam_clk *camclk = to_cam_clk(hw);
+
+ if (camclk->fmd->pmf == NULL)
+ return;
+
+ pm_runtime_put_sync(camclk->fmd->pmf);
+}
+
+static const struct clk_ops cam_clk_ops = {
+ .prepare = cam_clk_prepare,
+ .unprepare = cam_clk_unprepare,
+};
+
+static const char *cam_clk_p_names[] = { "sclk_cam0", "sclk_cam1" };
+
+static void fimc_md_unregister_clk_provider(struct fimc_md *fmd)
+{
+ struct cam_clk_provider *cp = &fmd->clk_provider;
+ unsigned int i;
+
+ if (cp->of_node)
+ of_clk_del_provider(cp->of_node);
+
+ for (i = 0; i < ARRAY_SIZE(cp->clks); i++)
+ if (!IS_ERR(cp->clks[i]))
+ clk_unregister(cp->clks[i]);
+}
+
+static int fimc_md_register_clk_provider(struct fimc_md *fmd)
+{
+ struct cam_clk_provider *cp = &fmd->clk_provider;
+ struct device *dev = &fmd->pdev->dev;
+ struct device_node *node;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(cp->clks); i++)
+ cp->clks[i] = ERR_PTR(-EINVAL);
+
+ node = of_get_child_by_name(dev->of_node, "clock-controller");
+ if (!node) {
+ dev_warn(dev, "clock-controller node at %s not found\n",
+ dev->of_node->full_name);
+ return 0;
+ }
+ for (i = 0; i < FIMC_MAX_CAMCLKS; i++) {
+ struct cam_clk *camclk = &cp->camclk[i];
+ struct clk_init_data init;
+ char clk_name[16];
+ struct clk *clk;
+
+ snprintf(clk_name, sizeof(clk_name), "cam_clkout%d", i);
+
+ init.name = clk_name;
+ init.ops = &cam_clk_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = &cam_clk_p_names[i];
+ init.num_parents = 1;
+ camclk->hw.init = &init;
+ camclk->fmd = fmd;
+
+ clk = clk_register(dev, &camclk->hw);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to register clock: %s (%ld)\n",
+ clk_name, PTR_ERR(clk));
+ ret = PTR_ERR(clk);
+ goto err;
+ }
+ cp->clks[i] = clk;
+ }
+
+ cp->clk_data.clks = cp->clks;
+ cp->clk_data.clk_num = i;
+ cp->of_node = node;
+
+ ret = of_clk_add_provider(node, of_clk_src_onecell_get,
+ &cp->clk_data);
+ if (!ret)
+ return 0;
+err:
+ fimc_md_unregister_clk_provider(fmd);
+ return ret;
+}
+#else
+#define fimc_md_register_clk_provider(fmd) (0)
+#define fimc_md_unregister_clk_provider(fmd) (0)
+#endif
+
static int fimc_md_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1465,16 +1569,24 @@ static int fimc_md_probe(struct platform_device *pdev)
fmd->use_isp = fimc_md_is_isp_available(dev->of_node);
+ ret = fimc_md_register_clk_provider(fmd);
+ if (ret < 0) {
+ v4l2_err(v4l2_dev, "clock provider registration failed\n");
+ return ret;
+ }
+
ret = v4l2_device_register(dev, &fmd->v4l2_dev);
if (ret < 0) {
v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret);
return ret;
}
+
ret = media_device_register(&fmd->media_dev);
if (ret < 0) {
v4l2_err(v4l2_dev, "Failed to register media device: %d\n", ret);
goto err_md;
}
+
ret = fimc_md_get_clocks(fmd);
if (ret)
goto err_clk;
@@ -1508,6 +1620,7 @@ static int fimc_md_probe(struct platform_device *pdev)
ret = fimc_md_create_links(fmd);
if (ret)
goto err_unlock;
+
ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev);
if (ret)
goto err_unlock;
@@ -1528,6 +1641,7 @@ err_clk:
media_device_unregister(&fmd->media_dev);
err_md:
v4l2_device_unregister(&fmd->v4l2_dev);
+ fimc_md_unregister_clk_provider(fmd);
return ret;
}
@@ -1538,6 +1652,7 @@ static int fimc_md_remove(struct platform_device *pdev)
if (!fmd)
return 0;
+ fimc_md_unregister_clk_provider(fmd);
v4l2_device_unregister(&fmd->v4l2_dev);
device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode);
fimc_md_unregister_entities(fmd);
diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h
index 62599fd..240ca71 100644
--- a/drivers/media/platform/exynos4-is/media-dev.h
+++ b/drivers/media/platform/exynos4-is/media-dev.h
@@ -10,6 +10,7 @@
#define FIMC_MDEVICE_H_
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/of.h>
@@ -89,6 +90,12 @@ struct fimc_sensor_info {
struct fimc_dev *host;
};
+struct cam_clk {
+ struct clk_hw hw;
+ struct fimc_md *fmd;
+};
+#define to_cam_clk(_hw) container_of(_hw, struct cam_clk, hw)
+
/**
* struct fimc_md - fimc media device information
* @csis: MIPI CSIS subdevs data
@@ -105,6 +112,7 @@ struct fimc_sensor_info {
* @pinctrl: camera port pinctrl handle
* @state_default: pinctrl default state handle
* @state_idle: pinctrl idle state handle
+ * @cam_clk_provider: CAMCLK clock provider structure
* @user_subdev_api: true if subdevs are not configured by the host driver
* @slock: spinlock protecting @sensor array
*/
@@ -122,13 +130,21 @@ struct fimc_md {
struct media_device media_dev;
struct v4l2_device v4l2_dev;
struct platform_device *pdev;
+
struct fimc_pinctrl {
struct pinctrl *pinctrl;
struct pinctrl_state *state_default;
struct pinctrl_state *state_idle;
} pinctl;
- bool user_subdev_api;
+ struct cam_clk_provider {
+ struct clk *clks[FIMC_MAX_CAMCLKS];
+ struct clk_onecell_data clk_data;
+ struct device_node *of_node;
+ struct cam_clk camclk[FIMC_MAX_CAMCLKS];
+ } clk_provider;
+
+ bool user_subdev_api;
spinlock_t slock;
struct list_head pipelines;
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 5/7] exynos4-is: Add clock provider for the external clocks
@ 2013-08-28 15:55 ` Sylwester Nawrocki
0 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds clock provider to expose the sclk_cam0/1 clocks
for image sensor subdevs.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
.../devicetree/bindings/media/samsung-fimc.txt | 17 ++-
drivers/media/platform/exynos4-is/media-dev.c | 115 ++++++++++++++++++++
drivers/media/platform/exynos4-is/media-dev.h | 18 ++-
3 files changed, 147 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
index 96312f6..9f4d295 100644
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -91,6 +91,15 @@ Optional properties
- samsung,camclk-out : specifies clock output for remote sensor,
0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
+'clock-controller' node (optional)
+----------------------------------
+
+The purpose of this node is to define a clock provider for external image
+sensors and link any of the CAM_?_CLKOUT clock outputs with related external
+clock consumer device. Properties specific to this node are described in
+../clock/clock-bindings.txt.
+
+
Image sensor nodes
------------------
@@ -114,7 +123,7 @@ Example:
vddio-supply = <...>;
clock-frequency = <24000000>;
- clocks = <...>;
+ clocks = <&camclk 1>;
clock-names = "mclk";
port {
@@ -135,7 +144,7 @@ Example:
vddio-supply = <...>;
clock-frequency = <24000000>;
- clocks = <...>;
+ clocks = <&camclk 0>;
clock-names = "mclk";
port {
@@ -156,6 +165,10 @@ Example:
pinctrl-names = "default";
pinctrl-0 = <&cam_port_a_clk_active>;
+ camclk: clock-controller {
+ #clock-cells = <1>;
+ };
+
/* parallel camera ports */
parallel-ports {
/* camera A input */
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index e327f45..6fba5f6 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -11,6 +11,8 @@
*/
#include <linux/bug.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/i2c.h>
@@ -1438,6 +1440,108 @@ static int fimc_md_get_pinctrl(struct fimc_md *fmd)
return 0;
}
+#ifdef CONFIG_OF
+static int cam_clk_prepare(struct clk_hw *hw)
+{
+ struct cam_clk *camclk = to_cam_clk(hw);
+ int ret;
+
+ if (camclk->fmd->pmf == NULL)
+ return -ENODEV;
+
+ ret = pm_runtime_get_sync(camclk->fmd->pmf);
+ return ret < 0 ? ret : 0;
+}
+
+static void cam_clk_unprepare(struct clk_hw *hw)
+{
+ struct cam_clk *camclk = to_cam_clk(hw);
+
+ if (camclk->fmd->pmf == NULL)
+ return;
+
+ pm_runtime_put_sync(camclk->fmd->pmf);
+}
+
+static const struct clk_ops cam_clk_ops = {
+ .prepare = cam_clk_prepare,
+ .unprepare = cam_clk_unprepare,
+};
+
+static const char *cam_clk_p_names[] = { "sclk_cam0", "sclk_cam1" };
+
+static void fimc_md_unregister_clk_provider(struct fimc_md *fmd)
+{
+ struct cam_clk_provider *cp = &fmd->clk_provider;
+ unsigned int i;
+
+ if (cp->of_node)
+ of_clk_del_provider(cp->of_node);
+
+ for (i = 0; i < ARRAY_SIZE(cp->clks); i++)
+ if (!IS_ERR(cp->clks[i]))
+ clk_unregister(cp->clks[i]);
+}
+
+static int fimc_md_register_clk_provider(struct fimc_md *fmd)
+{
+ struct cam_clk_provider *cp = &fmd->clk_provider;
+ struct device *dev = &fmd->pdev->dev;
+ struct device_node *node;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(cp->clks); i++)
+ cp->clks[i] = ERR_PTR(-EINVAL);
+
+ node = of_get_child_by_name(dev->of_node, "clock-controller");
+ if (!node) {
+ dev_warn(dev, "clock-controller node at %s not found\n",
+ dev->of_node->full_name);
+ return 0;
+ }
+ for (i = 0; i < FIMC_MAX_CAMCLKS; i++) {
+ struct cam_clk *camclk = &cp->camclk[i];
+ struct clk_init_data init;
+ char clk_name[16];
+ struct clk *clk;
+
+ snprintf(clk_name, sizeof(clk_name), "cam_clkout%d", i);
+
+ init.name = clk_name;
+ init.ops = &cam_clk_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = &cam_clk_p_names[i];
+ init.num_parents = 1;
+ camclk->hw.init = &init;
+ camclk->fmd = fmd;
+
+ clk = clk_register(dev, &camclk->hw);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to register clock: %s (%ld)\n",
+ clk_name, PTR_ERR(clk));
+ ret = PTR_ERR(clk);
+ goto err;
+ }
+ cp->clks[i] = clk;
+ }
+
+ cp->clk_data.clks = cp->clks;
+ cp->clk_data.clk_num = i;
+ cp->of_node = node;
+
+ ret = of_clk_add_provider(node, of_clk_src_onecell_get,
+ &cp->clk_data);
+ if (!ret)
+ return 0;
+err:
+ fimc_md_unregister_clk_provider(fmd);
+ return ret;
+}
+#else
+#define fimc_md_register_clk_provider(fmd) (0)
+#define fimc_md_unregister_clk_provider(fmd) (0)
+#endif
+
static int fimc_md_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1465,16 +1569,24 @@ static int fimc_md_probe(struct platform_device *pdev)
fmd->use_isp = fimc_md_is_isp_available(dev->of_node);
+ ret = fimc_md_register_clk_provider(fmd);
+ if (ret < 0) {
+ v4l2_err(v4l2_dev, "clock provider registration failed\n");
+ return ret;
+ }
+
ret = v4l2_device_register(dev, &fmd->v4l2_dev);
if (ret < 0) {
v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret);
return ret;
}
+
ret = media_device_register(&fmd->media_dev);
if (ret < 0) {
v4l2_err(v4l2_dev, "Failed to register media device: %d\n", ret);
goto err_md;
}
+
ret = fimc_md_get_clocks(fmd);
if (ret)
goto err_clk;
@@ -1508,6 +1620,7 @@ static int fimc_md_probe(struct platform_device *pdev)
ret = fimc_md_create_links(fmd);
if (ret)
goto err_unlock;
+
ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev);
if (ret)
goto err_unlock;
@@ -1528,6 +1641,7 @@ err_clk:
media_device_unregister(&fmd->media_dev);
err_md:
v4l2_device_unregister(&fmd->v4l2_dev);
+ fimc_md_unregister_clk_provider(fmd);
return ret;
}
@@ -1538,6 +1652,7 @@ static int fimc_md_remove(struct platform_device *pdev)
if (!fmd)
return 0;
+ fimc_md_unregister_clk_provider(fmd);
v4l2_device_unregister(&fmd->v4l2_dev);
device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode);
fimc_md_unregister_entities(fmd);
diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h
index 62599fd..240ca71 100644
--- a/drivers/media/platform/exynos4-is/media-dev.h
+++ b/drivers/media/platform/exynos4-is/media-dev.h
@@ -10,6 +10,7 @@
#define FIMC_MDEVICE_H_
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/of.h>
@@ -89,6 +90,12 @@ struct fimc_sensor_info {
struct fimc_dev *host;
};
+struct cam_clk {
+ struct clk_hw hw;
+ struct fimc_md *fmd;
+};
+#define to_cam_clk(_hw) container_of(_hw, struct cam_clk, hw)
+
/**
* struct fimc_md - fimc media device information
* @csis: MIPI CSIS subdevs data
@@ -105,6 +112,7 @@ struct fimc_sensor_info {
* @pinctrl: camera port pinctrl handle
* @state_default: pinctrl default state handle
* @state_idle: pinctrl idle state handle
+ * @cam_clk_provider: CAMCLK clock provider structure
* @user_subdev_api: true if subdevs are not configured by the host driver
* @slock: spinlock protecting @sensor array
*/
@@ -122,13 +130,21 @@ struct fimc_md {
struct media_device media_dev;
struct v4l2_device v4l2_dev;
struct platform_device *pdev;
+
struct fimc_pinctrl {
struct pinctrl *pinctrl;
struct pinctrl_state *state_default;
struct pinctrl_state *state_idle;
} pinctl;
- bool user_subdev_api;
+ struct cam_clk_provider {
+ struct clk *clks[FIMC_MAX_CAMCLKS];
+ struct clk_onecell_data clk_data;
+ struct device_node *of_node;
+ struct cam_clk camclk[FIMC_MAX_CAMCLKS];
+ } clk_provider;
+
+ bool user_subdev_api;
spinlock_t slock;
struct list_head pipelines;
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 6/7] exynos4-is: Use external s5k6a3 sensor driver
2013-08-28 15:55 ` Sylwester Nawrocki
@ 2013-08-28 15:55 ` Sylwester Nawrocki
-1 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-media
Cc: mturquette, g.liakhovetski, laurent.pinchart, arun.kk, hverkuil,
sakari.ailus, a.hajda, kyungmin.park, t.figa, linux-arm-kernel,
Sylwester Nawrocki
This patch removes the common fimc-is-sensor driver for image sensors
that are normally controlled by the FIMC-IS firmware. The FIMC-IS
driver now contains only a table of properties specific to each sensor.
The sensor properties required for the ISP's firmware are parsed from
device tree and retrieved from the internal table, which is selected
based on the compatible property of an image sensor.
To use the Exynos4x12 internal ISP the S5K6A3 sensor driver (drivers/
media/i2c/s5k6a3.c) is now required.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/media/platform/exynos4-is/fimc-is-regs.c | 2 +-
drivers/media/platform/exynos4-is/fimc-is-sensor.c | 285 +-------------------
drivers/media/platform/exynos4-is/fimc-is-sensor.h | 49 +---
drivers/media/platform/exynos4-is/fimc-is.c | 97 +++----
drivers/media/platform/exynos4-is/fimc-is.h | 4 +-
5 files changed, 57 insertions(+), 380 deletions(-)
diff --git a/drivers/media/platform/exynos4-is/fimc-is-regs.c b/drivers/media/platform/exynos4-is/fimc-is-regs.c
index f758e26..c1bc76d 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-regs.c
+++ b/drivers/media/platform/exynos4-is/fimc-is-regs.c
@@ -136,7 +136,7 @@ void fimc_is_hw_set_sensor_num(struct fimc_is *is)
mcuctl_write(IH_REPLY_DONE, is, MCUCTL_REG_ISSR(0));
mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1));
mcuctl_write(IHC_GET_SENSOR_NUM, is, MCUCTL_REG_ISSR(2));
- mcuctl_write(FIMC_IS_SENSOR_NUM, is, MCUCTL_REG_ISSR(3));
+ mcuctl_write(FIMC_IS_SENSORS_NUM, is, MCUCTL_REG_ISSR(3));
}
void fimc_is_hw_close_sensor(struct fimc_is *is, unsigned int index)
diff --git a/drivers/media/platform/exynos4-is/fimc-is-sensor.c b/drivers/media/platform/exynos4-is/fimc-is-sensor.c
index 6647421..10e82e2 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-sensor.c
+++ b/drivers/media/platform/exynos4-is/fimc-is-sensor.c
@@ -2,276 +2,21 @@
* Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
- *
* Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of_gpio.h>
-#include <linux/pm_runtime.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-#include <media/v4l2-subdev.h>
-#include "fimc-is.h"
#include "fimc-is-sensor.h"
-#define DRIVER_NAME "FIMC-IS-SENSOR"
-
-static const char * const sensor_supply_names[] = {
- "svdda",
- "svddio",
-};
-
-static const struct v4l2_mbus_framefmt fimc_is_sensor_formats[] = {
- {
- .code = V4L2_MBUS_FMT_SGRBG10_1X10,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .field = V4L2_FIELD_NONE,
- }
-};
-
-static const struct v4l2_mbus_framefmt *find_sensor_format(
- struct v4l2_mbus_framefmt *mf)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(fimc_is_sensor_formats); i++)
- if (mf->code == fimc_is_sensor_formats[i].code)
- return &fimc_is_sensor_formats[i];
-
- return &fimc_is_sensor_formats[0];
-}
-
-static int fimc_is_sensor_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_fh *fh,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- if (code->index >= ARRAY_SIZE(fimc_is_sensor_formats))
- return -EINVAL;
-
- code->code = fimc_is_sensor_formats[code->index].code;
- return 0;
-}
-
-static void fimc_is_sensor_try_format(struct fimc_is_sensor *sensor,
- struct v4l2_mbus_framefmt *mf)
-{
- const struct sensor_drv_data *dd = sensor->drvdata;
- const struct v4l2_mbus_framefmt *fmt;
-
- fmt = find_sensor_format(mf);
- mf->code = fmt->code;
- v4l_bound_align_image(&mf->width, 16 + 8, dd->width, 0,
- &mf->height, 12 + 8, dd->height, 0, 0);
-}
-
-static struct v4l2_mbus_framefmt *__fimc_is_sensor_get_format(
- struct fimc_is_sensor *sensor, struct v4l2_subdev_fh *fh,
- u32 pad, enum v4l2_subdev_format_whence which)
-{
- if (which == V4L2_SUBDEV_FORMAT_TRY)
- return fh ? v4l2_subdev_get_try_format(fh, pad) : NULL;
-
- return &sensor->format;
-}
-
-static int fimc_is_sensor_set_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_fh *fh,
- struct v4l2_subdev_format *fmt)
-{
- struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
- struct v4l2_mbus_framefmt *mf;
-
- fimc_is_sensor_try_format(sensor, &fmt->format);
-
- mf = __fimc_is_sensor_get_format(sensor, fh, fmt->pad, fmt->which);
- if (mf) {
- mutex_lock(&sensor->lock);
- if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
- *mf = fmt->format;
- mutex_unlock(&sensor->lock);
- }
- return 0;
-}
-
-static int fimc_is_sensor_get_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_fh *fh,
- struct v4l2_subdev_format *fmt)
-{
- struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
- struct v4l2_mbus_framefmt *mf;
-
- mf = __fimc_is_sensor_get_format(sensor, fh, fmt->pad, fmt->which);
-
- mutex_lock(&sensor->lock);
- fmt->format = *mf;
- mutex_unlock(&sensor->lock);
- return 0;
-}
-
-static struct v4l2_subdev_pad_ops fimc_is_sensor_pad_ops = {
- .enum_mbus_code = fimc_is_sensor_enum_mbus_code,
- .get_fmt = fimc_is_sensor_get_fmt,
- .set_fmt = fimc_is_sensor_set_fmt,
-};
-
-static int fimc_is_sensor_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
- struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
-
- *format = fimc_is_sensor_formats[0];
- format->width = FIMC_IS_SENSOR_DEF_PIX_WIDTH;
- format->height = FIMC_IS_SENSOR_DEF_PIX_HEIGHT;
-
- return 0;
-}
-
-static const struct v4l2_subdev_internal_ops fimc_is_sensor_sd_internal_ops = {
- .open = fimc_is_sensor_open,
-};
-
-static int fimc_is_sensor_s_power(struct v4l2_subdev *sd, int on)
-{
- struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
- int gpio = sensor->gpio_reset;
- int ret;
-
- if (on) {
- ret = pm_runtime_get(sensor->dev);
- if (ret < 0)
- return ret;
-
- ret = regulator_bulk_enable(SENSOR_NUM_SUPPLIES,
- sensor->supplies);
- if (ret < 0) {
- pm_runtime_put(sensor->dev);
- return ret;
- }
- if (gpio_is_valid(gpio)) {
- gpio_set_value(gpio, 1);
- usleep_range(600, 800);
- gpio_set_value(gpio, 0);
- usleep_range(10000, 11000);
- gpio_set_value(gpio, 1);
- }
-
- /* A delay needed for the sensor initialization. */
- msleep(20);
- } else {
- if (gpio_is_valid(gpio))
- gpio_set_value(gpio, 0);
-
- ret = regulator_bulk_disable(SENSOR_NUM_SUPPLIES,
- sensor->supplies);
- if (!ret)
- pm_runtime_put(sensor->dev);
- }
-
- pr_info("%s:%d: on: %d, ret: %d\n", __func__, __LINE__, on, ret);
-
- return ret;
-}
-
-static struct v4l2_subdev_core_ops fimc_is_sensor_core_ops = {
- .s_power = fimc_is_sensor_s_power,
-};
-
-static struct v4l2_subdev_ops fimc_is_sensor_subdev_ops = {
- .core = &fimc_is_sensor_core_ops,
- .pad = &fimc_is_sensor_pad_ops,
-};
-
-static const struct of_device_id fimc_is_sensor_of_match[];
-
-static int fimc_is_sensor_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct device *dev = &client->dev;
- struct fimc_is_sensor *sensor;
- const struct of_device_id *of_id;
- struct v4l2_subdev *sd;
- int gpio, i, ret;
-
- sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
- if (!sensor)
- return -ENOMEM;
-
- mutex_init(&sensor->lock);
- sensor->gpio_reset = -EINVAL;
-
- gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
- if (gpio_is_valid(gpio)) {
- ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW,
- DRIVER_NAME);
- if (ret < 0)
- return ret;
- }
- sensor->gpio_reset = gpio;
-
- for (i = 0; i < SENSOR_NUM_SUPPLIES; i++)
- sensor->supplies[i].supply = sensor_supply_names[i];
-
- ret = devm_regulator_bulk_get(&client->dev, SENSOR_NUM_SUPPLIES,
- sensor->supplies);
- if (ret < 0)
- return ret;
-
- of_id = of_match_node(fimc_is_sensor_of_match, dev->of_node);
- if (!of_id)
- return -ENODEV;
-
- sensor->drvdata = of_id->data;
- sensor->dev = dev;
-
- sd = &sensor->subdev;
- v4l2_i2c_subdev_init(sd, client, &fimc_is_sensor_subdev_ops);
- snprintf(sd->name, sizeof(sd->name), sensor->drvdata->subdev_name);
- sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
- sensor->format.code = fimc_is_sensor_formats[0].code;
- sensor->format.width = FIMC_IS_SENSOR_DEF_PIX_WIDTH;
- sensor->format.height = FIMC_IS_SENSOR_DEF_PIX_HEIGHT;
-
- sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
- ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0);
- if (ret < 0)
- return ret;
-
- pm_runtime_no_callbacks(dev);
- pm_runtime_enable(dev);
-
- return ret;
-}
-
-static int fimc_is_sensor_remove(struct i2c_client *client)
-{
- struct v4l2_subdev *sd = i2c_get_clientdata(client);
- media_entity_cleanup(&sd->entity);
- return 0;
-}
-
-static const struct i2c_device_id fimc_is_sensor_ids[] = {
- { }
-};
-
static const struct sensor_drv_data s5k6a3_drvdata = {
.id = FIMC_IS_SENSOR_ID_S5K6A3,
- .subdev_name = "S5K6A3",
- .width = S5K6A3_SENSOR_WIDTH,
- .height = S5K6A3_SENSOR_HEIGHT,
+ .open_timeout = S5K6A3_OPEN_TIMEOUT,
};
-static const struct of_device_id fimc_is_sensor_of_match[] = {
+static const struct of_device_id fimc_is_sensor_of_ids[] = {
{
.compatible = "samsung,s5k6a3",
.data = &s5k6a3_drvdata,
@@ -279,27 +24,11 @@ static const struct of_device_id fimc_is_sensor_of_match[] = {
{ }
};
-static struct i2c_driver fimc_is_sensor_driver = {
- .driver = {
- .of_match_table = fimc_is_sensor_of_match,
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .probe = fimc_is_sensor_probe,
- .remove = fimc_is_sensor_remove,
- .id_table = fimc_is_sensor_ids,
-};
-
-int fimc_is_register_sensor_driver(void)
+const struct sensor_drv_data *fimc_is_sensor_get_drvdata(
+ struct device_node *node)
{
- return i2c_add_driver(&fimc_is_sensor_driver);
-}
+ const struct of_device_id *of_id;
-void fimc_is_unregister_sensor_driver(void)
-{
- i2c_del_driver(&fimc_is_sensor_driver);
+ of_id = of_match_node(fimc_is_sensor_of_ids, node);
+ return of_id ? of_id->data : NULL;
}
-
-MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
-MODULE_DESCRIPTION("Exynos4x12 FIMC-IS image sensor subdev driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/exynos4-is/fimc-is-sensor.h b/drivers/media/platform/exynos4-is/fimc-is-sensor.h
index 6036d49..173ccff 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-sensor.h
+++ b/drivers/media/platform/exynos4-is/fimc-is-sensor.h
@@ -13,24 +13,13 @@
#ifndef FIMC_IS_SENSOR_H_
#define FIMC_IS_SENSOR_H_
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-subdev.h>
-
-#define FIMC_IS_SENSOR_OPEN_TIMEOUT 2000 /* ms */
-
-#define FIMC_IS_SENSOR_DEF_PIX_WIDTH 1296
-#define FIMC_IS_SENSOR_DEF_PIX_HEIGHT 732
+#include <linux/of.h>
+#include <linux/types.h>
+#define S5K6A3_OPEN_TIMEOUT 2000 /* ms */
#define S5K6A3_SENSOR_WIDTH 1392
#define S5K6A3_SENSOR_HEIGHT 1392
-#define SENSOR_NUM_SUPPLIES 2
-
enum fimc_is_sensor_id {
FIMC_IS_SENSOR_ID_S5K3H2 = 1,
FIMC_IS_SENSOR_ID_S5K6A3,
@@ -45,45 +34,23 @@ enum fimc_is_sensor_id {
struct sensor_drv_data {
enum fimc_is_sensor_id id;
- const char * const subdev_name;
- unsigned int width;
- unsigned int height;
+ /* sensor open timeout in ms */
+ unsigned short open_timeout;
};
/**
* struct fimc_is_sensor - fimc-is sensor data structure
- * @dev: pointer to this I2C client device structure
- * @subdev: the image sensor's v4l2 subdev
- * @pad: subdev media source pad
- * @supplies: image sensor's voltage regulator supplies
- * @gpio_reset: GPIO connected to the sensor's reset pin
* @drvdata: a pointer to the sensor's parameters data structure
* @i2c_bus: ISP I2C bus index (0...1)
* @test_pattern: true to enable video test pattern
- * @lock: mutex protecting the structure's members below
- * @format: media bus format at the sensor's source pad
*/
struct fimc_is_sensor {
- struct device *dev;
- struct v4l2_subdev subdev;
- struct media_pad pad;
- struct regulator_bulk_data supplies[SENSOR_NUM_SUPPLIES];
- int gpio_reset;
const struct sensor_drv_data *drvdata;
unsigned int i2c_bus;
- bool test_pattern;
-
- struct mutex lock;
- struct v4l2_mbus_framefmt format;
+ u8 test_pattern;
};
-static inline
-struct fimc_is_sensor *sd_to_fimc_is_sensor(struct v4l2_subdev *sd)
-{
- return container_of(sd, struct fimc_is_sensor, subdev);
-}
-
-int fimc_is_register_sensor_driver(void);
-void fimc_is_unregister_sensor_driver(void);
+const struct sensor_drv_data *fimc_is_sensor_get_drvdata(
+ struct device_node *node);
#endif /* FIMC_IS_SENSOR_H_ */
diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index 9b7fd1c..6743ae3 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -161,78 +161,66 @@ static void fimc_is_disable_clocks(struct fimc_is *is)
}
}
-static int fimc_is_parse_sensor_config(struct fimc_is_sensor *sensor,
- struct device_node *np)
+static int fimc_is_parse_sensor_config(struct fimc_is *is, unsigned int index,
+ struct device_node *node)
{
+ struct fimc_is_sensor *sensor = &is->sensor[index];
u32 tmp = 0;
int ret;
- np = v4l2_of_get_next_endpoint(np, NULL);
- if (!np)
+ sensor->drvdata = fimc_is_sensor_get_drvdata(node);
+ if (!sensor->drvdata) {
+ dev_err(&is->pdev->dev, "no driver data found for: %s\n",
+ node->full_name);
+ return -EINVAL;
+ }
+
+ node = v4l2_of_get_next_endpoint(node, NULL);
+ if (!node)
return -ENXIO;
- np = v4l2_of_get_remote_port(np);
- if (!np)
+
+ node = v4l2_of_get_remote_port(node);
+ if (!node)
return -ENXIO;
/* Use MIPI-CSIS channel id to determine the ISP I2C bus index. */
- ret = of_property_read_u32(np, "reg", &tmp);
- sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0;
+ ret = of_property_read_u32(node, "reg", &tmp);
+ if (ret < 0) {
+ dev_err(&is->pdev->dev, "reg property not found at: %s\n",
+ node->full_name);
+ return ret;
+ }
- return ret;
+ sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0;
+ return 0;
}
static int fimc_is_register_subdevs(struct fimc_is *is)
{
- struct device_node *adapter, *child;
- int ret;
+ struct device_node *i2c_bus, *child;
+ int ret, index = 0;
ret = fimc_isp_subdev_create(&is->isp);
if (ret < 0)
return ret;
- for_each_compatible_node(adapter, NULL, FIMC_IS_I2C_COMPATIBLE) {
- if (!of_find_device_by_node(adapter)) {
- of_node_put(adapter);
- return -EPROBE_DEFER;
- }
+ for_each_compatible_node(i2c_bus, NULL, FIMC_IS_I2C_COMPATIBLE) {
+ for_each_available_child_of_node(i2c_bus, child) {
+ ret = fimc_is_parse_sensor_config(is, index, child);
- for_each_available_child_of_node(adapter, child) {
- struct i2c_client *client;
- struct v4l2_subdev *sd;
-
- client = of_find_i2c_device_by_node(child);
- if (!client)
- goto e_retry;
-
- sd = i2c_get_clientdata(client);
- if (!sd)
- goto e_retry;
-
- /* FIXME: Add support for multiple sensors. */
- if (WARN_ON(is->sensor))
- continue;
-
- is->sensor = sd_to_fimc_is_sensor(sd);
-
- if (fimc_is_parse_sensor_config(is->sensor, child)) {
- dev_warn(&is->pdev->dev, "DT parse error: %s\n",
- child->full_name);
+ if (ret < 0 || index >= FIMC_IS_SENSORS_NUM) {
+ of_node_put(child);
+ return ret;
}
- pr_debug("%s(): registered subdev: %p\n",
- __func__, sd->name);
+ index++;
}
}
return 0;
-
-e_retry:
- of_node_put(child);
- return -EPROBE_DEFER;
}
static int fimc_is_unregister_subdevs(struct fimc_is *is)
{
fimc_isp_subdev_destroy(&is->isp);
- is->sensor = NULL;
return 0;
}
@@ -647,7 +635,7 @@ static int fimc_is_hw_open_sensor(struct fimc_is *is,
fimc_is_hw_set_intgr0_gd0(is);
return fimc_is_wait_event(is, IS_ST_OPEN_SENSOR, 1,
- FIMC_IS_SENSOR_OPEN_TIMEOUT);
+ sensor->drvdata->open_timeout);
}
@@ -661,8 +649,8 @@ int fimc_is_hw_initialize(struct fimc_is *is)
u32 prev_id;
int i, ret;
- /* Sensor initialization. */
- ret = fimc_is_hw_open_sensor(is, is->sensor);
+ /* Sensor initialization. Only one sensor is currently supported. */
+ ret = fimc_is_hw_open_sensor(is, &is->sensor[0]);
if (ret < 0)
return ret;
@@ -962,27 +950,20 @@ static int fimc_is_module_init(void)
{
int ret;
- ret = fimc_is_register_sensor_driver();
- if (ret < 0)
- return ret;
-
ret = fimc_is_register_i2c_driver();
if (ret < 0)
- goto err_sens;
+ return ret;
ret = platform_driver_register(&fimc_is_driver);
- if (!ret)
- return ret;
- fimc_is_unregister_i2c_driver();
-err_sens:
- fimc_is_unregister_sensor_driver();
+ if (ret < 0)
+ fimc_is_unregister_i2c_driver();
+
return ret;
}
static void fimc_is_module_exit(void)
{
- fimc_is_unregister_sensor_driver();
fimc_is_unregister_i2c_driver();
platform_driver_unregister(&fimc_is_driver);
}
diff --git a/drivers/media/platform/exynos4-is/fimc-is.h b/drivers/media/platform/exynos4-is/fimc-is.h
index 61bb012..01f802f 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.h
+++ b/drivers/media/platform/exynos4-is/fimc-is.h
@@ -39,7 +39,7 @@
#define FIMC_IS_FW_LOAD_TIMEOUT 1000 /* ms */
#define FIMC_IS_POWER_ON_TIMEOUT 1000 /* us */
-#define FIMC_IS_SENSOR_NUM 2
+#define FIMC_IS_SENSORS_NUM 2
/* Memory definitions */
#define FIMC_IS_CPU_MEM_SIZE (0xa00000)
@@ -253,7 +253,7 @@ struct fimc_is {
struct firmware *f_w;
struct fimc_isp isp;
- struct fimc_is_sensor *sensor;
+ struct fimc_is_sensor sensor[FIMC_IS_SENSORS_NUM];
struct fimc_is_setfile setfile;
struct vb2_alloc_ctx *alloc_ctx;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 6/7] exynos4-is: Use external s5k6a3 sensor driver
@ 2013-08-28 15:55 ` Sylwester Nawrocki
0 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:55 UTC (permalink / raw)
To: linux-arm-kernel
This patch removes the common fimc-is-sensor driver for image sensors
that are normally controlled by the FIMC-IS firmware. The FIMC-IS
driver now contains only a table of properties specific to each sensor.
The sensor properties required for the ISP's firmware are parsed from
device tree and retrieved from the internal table, which is selected
based on the compatible property of an image sensor.
To use the Exynos4x12 internal ISP the S5K6A3 sensor driver (drivers/
media/i2c/s5k6a3.c) is now required.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/media/platform/exynos4-is/fimc-is-regs.c | 2 +-
drivers/media/platform/exynos4-is/fimc-is-sensor.c | 285 +-------------------
drivers/media/platform/exynos4-is/fimc-is-sensor.h | 49 +---
drivers/media/platform/exynos4-is/fimc-is.c | 97 +++----
drivers/media/platform/exynos4-is/fimc-is.h | 4 +-
5 files changed, 57 insertions(+), 380 deletions(-)
diff --git a/drivers/media/platform/exynos4-is/fimc-is-regs.c b/drivers/media/platform/exynos4-is/fimc-is-regs.c
index f758e26..c1bc76d 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-regs.c
+++ b/drivers/media/platform/exynos4-is/fimc-is-regs.c
@@ -136,7 +136,7 @@ void fimc_is_hw_set_sensor_num(struct fimc_is *is)
mcuctl_write(IH_REPLY_DONE, is, MCUCTL_REG_ISSR(0));
mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1));
mcuctl_write(IHC_GET_SENSOR_NUM, is, MCUCTL_REG_ISSR(2));
- mcuctl_write(FIMC_IS_SENSOR_NUM, is, MCUCTL_REG_ISSR(3));
+ mcuctl_write(FIMC_IS_SENSORS_NUM, is, MCUCTL_REG_ISSR(3));
}
void fimc_is_hw_close_sensor(struct fimc_is *is, unsigned int index)
diff --git a/drivers/media/platform/exynos4-is/fimc-is-sensor.c b/drivers/media/platform/exynos4-is/fimc-is-sensor.c
index 6647421..10e82e2 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-sensor.c
+++ b/drivers/media/platform/exynos4-is/fimc-is-sensor.c
@@ -2,276 +2,21 @@
* Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
- *
* Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of_gpio.h>
-#include <linux/pm_runtime.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-#include <media/v4l2-subdev.h>
-#include "fimc-is.h"
#include "fimc-is-sensor.h"
-#define DRIVER_NAME "FIMC-IS-SENSOR"
-
-static const char * const sensor_supply_names[] = {
- "svdda",
- "svddio",
-};
-
-static const struct v4l2_mbus_framefmt fimc_is_sensor_formats[] = {
- {
- .code = V4L2_MBUS_FMT_SGRBG10_1X10,
- .colorspace = V4L2_COLORSPACE_SRGB,
- .field = V4L2_FIELD_NONE,
- }
-};
-
-static const struct v4l2_mbus_framefmt *find_sensor_format(
- struct v4l2_mbus_framefmt *mf)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(fimc_is_sensor_formats); i++)
- if (mf->code == fimc_is_sensor_formats[i].code)
- return &fimc_is_sensor_formats[i];
-
- return &fimc_is_sensor_formats[0];
-}
-
-static int fimc_is_sensor_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_fh *fh,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- if (code->index >= ARRAY_SIZE(fimc_is_sensor_formats))
- return -EINVAL;
-
- code->code = fimc_is_sensor_formats[code->index].code;
- return 0;
-}
-
-static void fimc_is_sensor_try_format(struct fimc_is_sensor *sensor,
- struct v4l2_mbus_framefmt *mf)
-{
- const struct sensor_drv_data *dd = sensor->drvdata;
- const struct v4l2_mbus_framefmt *fmt;
-
- fmt = find_sensor_format(mf);
- mf->code = fmt->code;
- v4l_bound_align_image(&mf->width, 16 + 8, dd->width, 0,
- &mf->height, 12 + 8, dd->height, 0, 0);
-}
-
-static struct v4l2_mbus_framefmt *__fimc_is_sensor_get_format(
- struct fimc_is_sensor *sensor, struct v4l2_subdev_fh *fh,
- u32 pad, enum v4l2_subdev_format_whence which)
-{
- if (which == V4L2_SUBDEV_FORMAT_TRY)
- return fh ? v4l2_subdev_get_try_format(fh, pad) : NULL;
-
- return &sensor->format;
-}
-
-static int fimc_is_sensor_set_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_fh *fh,
- struct v4l2_subdev_format *fmt)
-{
- struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
- struct v4l2_mbus_framefmt *mf;
-
- fimc_is_sensor_try_format(sensor, &fmt->format);
-
- mf = __fimc_is_sensor_get_format(sensor, fh, fmt->pad, fmt->which);
- if (mf) {
- mutex_lock(&sensor->lock);
- if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
- *mf = fmt->format;
- mutex_unlock(&sensor->lock);
- }
- return 0;
-}
-
-static int fimc_is_sensor_get_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_fh *fh,
- struct v4l2_subdev_format *fmt)
-{
- struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
- struct v4l2_mbus_framefmt *mf;
-
- mf = __fimc_is_sensor_get_format(sensor, fh, fmt->pad, fmt->which);
-
- mutex_lock(&sensor->lock);
- fmt->format = *mf;
- mutex_unlock(&sensor->lock);
- return 0;
-}
-
-static struct v4l2_subdev_pad_ops fimc_is_sensor_pad_ops = {
- .enum_mbus_code = fimc_is_sensor_enum_mbus_code,
- .get_fmt = fimc_is_sensor_get_fmt,
- .set_fmt = fimc_is_sensor_set_fmt,
-};
-
-static int fimc_is_sensor_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
- struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
-
- *format = fimc_is_sensor_formats[0];
- format->width = FIMC_IS_SENSOR_DEF_PIX_WIDTH;
- format->height = FIMC_IS_SENSOR_DEF_PIX_HEIGHT;
-
- return 0;
-}
-
-static const struct v4l2_subdev_internal_ops fimc_is_sensor_sd_internal_ops = {
- .open = fimc_is_sensor_open,
-};
-
-static int fimc_is_sensor_s_power(struct v4l2_subdev *sd, int on)
-{
- struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd);
- int gpio = sensor->gpio_reset;
- int ret;
-
- if (on) {
- ret = pm_runtime_get(sensor->dev);
- if (ret < 0)
- return ret;
-
- ret = regulator_bulk_enable(SENSOR_NUM_SUPPLIES,
- sensor->supplies);
- if (ret < 0) {
- pm_runtime_put(sensor->dev);
- return ret;
- }
- if (gpio_is_valid(gpio)) {
- gpio_set_value(gpio, 1);
- usleep_range(600, 800);
- gpio_set_value(gpio, 0);
- usleep_range(10000, 11000);
- gpio_set_value(gpio, 1);
- }
-
- /* A delay needed for the sensor initialization. */
- msleep(20);
- } else {
- if (gpio_is_valid(gpio))
- gpio_set_value(gpio, 0);
-
- ret = regulator_bulk_disable(SENSOR_NUM_SUPPLIES,
- sensor->supplies);
- if (!ret)
- pm_runtime_put(sensor->dev);
- }
-
- pr_info("%s:%d: on: %d, ret: %d\n", __func__, __LINE__, on, ret);
-
- return ret;
-}
-
-static struct v4l2_subdev_core_ops fimc_is_sensor_core_ops = {
- .s_power = fimc_is_sensor_s_power,
-};
-
-static struct v4l2_subdev_ops fimc_is_sensor_subdev_ops = {
- .core = &fimc_is_sensor_core_ops,
- .pad = &fimc_is_sensor_pad_ops,
-};
-
-static const struct of_device_id fimc_is_sensor_of_match[];
-
-static int fimc_is_sensor_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct device *dev = &client->dev;
- struct fimc_is_sensor *sensor;
- const struct of_device_id *of_id;
- struct v4l2_subdev *sd;
- int gpio, i, ret;
-
- sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
- if (!sensor)
- return -ENOMEM;
-
- mutex_init(&sensor->lock);
- sensor->gpio_reset = -EINVAL;
-
- gpio = of_get_gpio_flags(dev->of_node, 0, NULL);
- if (gpio_is_valid(gpio)) {
- ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW,
- DRIVER_NAME);
- if (ret < 0)
- return ret;
- }
- sensor->gpio_reset = gpio;
-
- for (i = 0; i < SENSOR_NUM_SUPPLIES; i++)
- sensor->supplies[i].supply = sensor_supply_names[i];
-
- ret = devm_regulator_bulk_get(&client->dev, SENSOR_NUM_SUPPLIES,
- sensor->supplies);
- if (ret < 0)
- return ret;
-
- of_id = of_match_node(fimc_is_sensor_of_match, dev->of_node);
- if (!of_id)
- return -ENODEV;
-
- sensor->drvdata = of_id->data;
- sensor->dev = dev;
-
- sd = &sensor->subdev;
- v4l2_i2c_subdev_init(sd, client, &fimc_is_sensor_subdev_ops);
- snprintf(sd->name, sizeof(sd->name), sensor->drvdata->subdev_name);
- sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
- sensor->format.code = fimc_is_sensor_formats[0].code;
- sensor->format.width = FIMC_IS_SENSOR_DEF_PIX_WIDTH;
- sensor->format.height = FIMC_IS_SENSOR_DEF_PIX_HEIGHT;
-
- sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
- ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0);
- if (ret < 0)
- return ret;
-
- pm_runtime_no_callbacks(dev);
- pm_runtime_enable(dev);
-
- return ret;
-}
-
-static int fimc_is_sensor_remove(struct i2c_client *client)
-{
- struct v4l2_subdev *sd = i2c_get_clientdata(client);
- media_entity_cleanup(&sd->entity);
- return 0;
-}
-
-static const struct i2c_device_id fimc_is_sensor_ids[] = {
- { }
-};
-
static const struct sensor_drv_data s5k6a3_drvdata = {
.id = FIMC_IS_SENSOR_ID_S5K6A3,
- .subdev_name = "S5K6A3",
- .width = S5K6A3_SENSOR_WIDTH,
- .height = S5K6A3_SENSOR_HEIGHT,
+ .open_timeout = S5K6A3_OPEN_TIMEOUT,
};
-static const struct of_device_id fimc_is_sensor_of_match[] = {
+static const struct of_device_id fimc_is_sensor_of_ids[] = {
{
.compatible = "samsung,s5k6a3",
.data = &s5k6a3_drvdata,
@@ -279,27 +24,11 @@ static const struct of_device_id fimc_is_sensor_of_match[] = {
{ }
};
-static struct i2c_driver fimc_is_sensor_driver = {
- .driver = {
- .of_match_table = fimc_is_sensor_of_match,
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .probe = fimc_is_sensor_probe,
- .remove = fimc_is_sensor_remove,
- .id_table = fimc_is_sensor_ids,
-};
-
-int fimc_is_register_sensor_driver(void)
+const struct sensor_drv_data *fimc_is_sensor_get_drvdata(
+ struct device_node *node)
{
- return i2c_add_driver(&fimc_is_sensor_driver);
-}
+ const struct of_device_id *of_id;
-void fimc_is_unregister_sensor_driver(void)
-{
- i2c_del_driver(&fimc_is_sensor_driver);
+ of_id = of_match_node(fimc_is_sensor_of_ids, node);
+ return of_id ? of_id->data : NULL;
}
-
-MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
-MODULE_DESCRIPTION("Exynos4x12 FIMC-IS image sensor subdev driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/exynos4-is/fimc-is-sensor.h b/drivers/media/platform/exynos4-is/fimc-is-sensor.h
index 6036d49..173ccff 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-sensor.h
+++ b/drivers/media/platform/exynos4-is/fimc-is-sensor.h
@@ -13,24 +13,13 @@
#ifndef FIMC_IS_SENSOR_H_
#define FIMC_IS_SENSOR_H_
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-subdev.h>
-
-#define FIMC_IS_SENSOR_OPEN_TIMEOUT 2000 /* ms */
-
-#define FIMC_IS_SENSOR_DEF_PIX_WIDTH 1296
-#define FIMC_IS_SENSOR_DEF_PIX_HEIGHT 732
+#include <linux/of.h>
+#include <linux/types.h>
+#define S5K6A3_OPEN_TIMEOUT 2000 /* ms */
#define S5K6A3_SENSOR_WIDTH 1392
#define S5K6A3_SENSOR_HEIGHT 1392
-#define SENSOR_NUM_SUPPLIES 2
-
enum fimc_is_sensor_id {
FIMC_IS_SENSOR_ID_S5K3H2 = 1,
FIMC_IS_SENSOR_ID_S5K6A3,
@@ -45,45 +34,23 @@ enum fimc_is_sensor_id {
struct sensor_drv_data {
enum fimc_is_sensor_id id;
- const char * const subdev_name;
- unsigned int width;
- unsigned int height;
+ /* sensor open timeout in ms */
+ unsigned short open_timeout;
};
/**
* struct fimc_is_sensor - fimc-is sensor data structure
- * @dev: pointer to this I2C client device structure
- * @subdev: the image sensor's v4l2 subdev
- * @pad: subdev media source pad
- * @supplies: image sensor's voltage regulator supplies
- * @gpio_reset: GPIO connected to the sensor's reset pin
* @drvdata: a pointer to the sensor's parameters data structure
* @i2c_bus: ISP I2C bus index (0...1)
* @test_pattern: true to enable video test pattern
- * @lock: mutex protecting the structure's members below
- * @format: media bus format at the sensor's source pad
*/
struct fimc_is_sensor {
- struct device *dev;
- struct v4l2_subdev subdev;
- struct media_pad pad;
- struct regulator_bulk_data supplies[SENSOR_NUM_SUPPLIES];
- int gpio_reset;
const struct sensor_drv_data *drvdata;
unsigned int i2c_bus;
- bool test_pattern;
-
- struct mutex lock;
- struct v4l2_mbus_framefmt format;
+ u8 test_pattern;
};
-static inline
-struct fimc_is_sensor *sd_to_fimc_is_sensor(struct v4l2_subdev *sd)
-{
- return container_of(sd, struct fimc_is_sensor, subdev);
-}
-
-int fimc_is_register_sensor_driver(void);
-void fimc_is_unregister_sensor_driver(void);
+const struct sensor_drv_data *fimc_is_sensor_get_drvdata(
+ struct device_node *node);
#endif /* FIMC_IS_SENSOR_H_ */
diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index 9b7fd1c..6743ae3 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -161,78 +161,66 @@ static void fimc_is_disable_clocks(struct fimc_is *is)
}
}
-static int fimc_is_parse_sensor_config(struct fimc_is_sensor *sensor,
- struct device_node *np)
+static int fimc_is_parse_sensor_config(struct fimc_is *is, unsigned int index,
+ struct device_node *node)
{
+ struct fimc_is_sensor *sensor = &is->sensor[index];
u32 tmp = 0;
int ret;
- np = v4l2_of_get_next_endpoint(np, NULL);
- if (!np)
+ sensor->drvdata = fimc_is_sensor_get_drvdata(node);
+ if (!sensor->drvdata) {
+ dev_err(&is->pdev->dev, "no driver data found for: %s\n",
+ node->full_name);
+ return -EINVAL;
+ }
+
+ node = v4l2_of_get_next_endpoint(node, NULL);
+ if (!node)
return -ENXIO;
- np = v4l2_of_get_remote_port(np);
- if (!np)
+
+ node = v4l2_of_get_remote_port(node);
+ if (!node)
return -ENXIO;
/* Use MIPI-CSIS channel id to determine the ISP I2C bus index. */
- ret = of_property_read_u32(np, "reg", &tmp);
- sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0;
+ ret = of_property_read_u32(node, "reg", &tmp);
+ if (ret < 0) {
+ dev_err(&is->pdev->dev, "reg property not found at: %s\n",
+ node->full_name);
+ return ret;
+ }
- return ret;
+ sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0;
+ return 0;
}
static int fimc_is_register_subdevs(struct fimc_is *is)
{
- struct device_node *adapter, *child;
- int ret;
+ struct device_node *i2c_bus, *child;
+ int ret, index = 0;
ret = fimc_isp_subdev_create(&is->isp);
if (ret < 0)
return ret;
- for_each_compatible_node(adapter, NULL, FIMC_IS_I2C_COMPATIBLE) {
- if (!of_find_device_by_node(adapter)) {
- of_node_put(adapter);
- return -EPROBE_DEFER;
- }
+ for_each_compatible_node(i2c_bus, NULL, FIMC_IS_I2C_COMPATIBLE) {
+ for_each_available_child_of_node(i2c_bus, child) {
+ ret = fimc_is_parse_sensor_config(is, index, child);
- for_each_available_child_of_node(adapter, child) {
- struct i2c_client *client;
- struct v4l2_subdev *sd;
-
- client = of_find_i2c_device_by_node(child);
- if (!client)
- goto e_retry;
-
- sd = i2c_get_clientdata(client);
- if (!sd)
- goto e_retry;
-
- /* FIXME: Add support for multiple sensors. */
- if (WARN_ON(is->sensor))
- continue;
-
- is->sensor = sd_to_fimc_is_sensor(sd);
-
- if (fimc_is_parse_sensor_config(is->sensor, child)) {
- dev_warn(&is->pdev->dev, "DT parse error: %s\n",
- child->full_name);
+ if (ret < 0 || index >= FIMC_IS_SENSORS_NUM) {
+ of_node_put(child);
+ return ret;
}
- pr_debug("%s(): registered subdev: %p\n",
- __func__, sd->name);
+ index++;
}
}
return 0;
-
-e_retry:
- of_node_put(child);
- return -EPROBE_DEFER;
}
static int fimc_is_unregister_subdevs(struct fimc_is *is)
{
fimc_isp_subdev_destroy(&is->isp);
- is->sensor = NULL;
return 0;
}
@@ -647,7 +635,7 @@ static int fimc_is_hw_open_sensor(struct fimc_is *is,
fimc_is_hw_set_intgr0_gd0(is);
return fimc_is_wait_event(is, IS_ST_OPEN_SENSOR, 1,
- FIMC_IS_SENSOR_OPEN_TIMEOUT);
+ sensor->drvdata->open_timeout);
}
@@ -661,8 +649,8 @@ int fimc_is_hw_initialize(struct fimc_is *is)
u32 prev_id;
int i, ret;
- /* Sensor initialization. */
- ret = fimc_is_hw_open_sensor(is, is->sensor);
+ /* Sensor initialization. Only one sensor is currently supported. */
+ ret = fimc_is_hw_open_sensor(is, &is->sensor[0]);
if (ret < 0)
return ret;
@@ -962,27 +950,20 @@ static int fimc_is_module_init(void)
{
int ret;
- ret = fimc_is_register_sensor_driver();
- if (ret < 0)
- return ret;
-
ret = fimc_is_register_i2c_driver();
if (ret < 0)
- goto err_sens;
+ return ret;
ret = platform_driver_register(&fimc_is_driver);
- if (!ret)
- return ret;
- fimc_is_unregister_i2c_driver();
-err_sens:
- fimc_is_unregister_sensor_driver();
+ if (ret < 0)
+ fimc_is_unregister_i2c_driver();
+
return ret;
}
static void fimc_is_module_exit(void)
{
- fimc_is_unregister_sensor_driver();
fimc_is_unregister_i2c_driver();
platform_driver_unregister(&fimc_is_driver);
}
diff --git a/drivers/media/platform/exynos4-is/fimc-is.h b/drivers/media/platform/exynos4-is/fimc-is.h
index 61bb012..01f802f 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.h
+++ b/drivers/media/platform/exynos4-is/fimc-is.h
@@ -39,7 +39,7 @@
#define FIMC_IS_FW_LOAD_TIMEOUT 1000 /* ms */
#define FIMC_IS_POWER_ON_TIMEOUT 1000 /* us */
-#define FIMC_IS_SENSOR_NUM 2
+#define FIMC_IS_SENSORS_NUM 2
/* Memory definitions */
#define FIMC_IS_CPU_MEM_SIZE (0xa00000)
@@ -253,7 +253,7 @@ struct fimc_is {
struct firmware *f_w;
struct fimc_isp isp;
- struct fimc_is_sensor *sensor;
+ struct fimc_is_sensor sensor[FIMC_IS_SENSORS_NUM];
struct fimc_is_setfile setfile;
struct vb2_alloc_ctx *alloc_ctx;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 7/7] exynos4-is: Add support for asynchronous sensor subddevs registration
2013-08-28 15:55 ` Sylwester Nawrocki
@ 2013-08-28 15:56 ` Sylwester Nawrocki
-1 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:56 UTC (permalink / raw)
To: linux-media
Cc: mturquette, g.liakhovetski, laurent.pinchart, arun.kk, hverkuil,
sakari.ailus, a.hajda, kyungmin.park, t.figa, linux-arm-kernel,
Sylwester Nawrocki
Add support for registering external sensor subdevs using the v4l2-async
API. The async API is used only for sensor subdevs and only for platforms
instantiated from Device Tree.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
Changes since v1:
- register clock provider after registering FIMC devices so the clock
can be actually used right after it is registered.
---
.../devicetree/bindings/media/samsung-fimc.txt | 4 +-
drivers/media/platform/exynos4-is/media-dev.c | 234 +++++++++++---------
drivers/media/platform/exynos4-is/media-dev.h | 13 +-
3 files changed, 146 insertions(+), 105 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
index 9f4d295..daf145d 100644
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -106,8 +106,8 @@ Image sensor nodes
The sensor device nodes should be added to their control bus controller (e.g.
I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
using the common video interfaces bindings, defined in video-interfaces.txt.
-The implementation of this bindings requires clock-frequency property to be
-present in the sensor device nodes.
+An optional clock-frequency property needs to be present in the sensor device
+nodes. Default value when this property is not present is 24 MHz.
Example:
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 6fba5f6..c10dee2 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -27,6 +27,7 @@
#include <linux/pm_runtime.h>
#include <linux/types.h>
#include <linux/slab.h>
+#include <media/v4l2-async.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-of.h>
#include <media/media-device.h>
@@ -221,6 +222,7 @@ static int __fimc_pipeline_open(struct exynos_media_pipeline *ep,
if (ret < 0)
return ret;
}
+
ret = fimc_md_set_camclk(sd, true);
if (ret < 0)
goto err_wbclk;
@@ -381,77 +383,18 @@ static void fimc_md_unregister_sensor(struct v4l2_subdev *sd)
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct i2c_adapter *adapter;
- if (!client)
+ if (!client || client->dev.of_node)
return;
v4l2_device_unregister_subdev(sd);
- if (!client->dev.of_node) {
- adapter = client->adapter;
- i2c_unregister_device(client);
- if (adapter)
- i2c_put_adapter(adapter);
- }
+ adapter = client->adapter;
+ i2c_unregister_device(client);
+ if (adapter)
+ i2c_put_adapter(adapter);
}
#ifdef CONFIG_OF
-/* Register I2C client subdev associated with @node. */
-static int fimc_md_of_add_sensor(struct fimc_md *fmd,
- struct device_node *node, int index)
-{
- struct fimc_sensor_info *si;
- struct i2c_client *client;
- struct v4l2_subdev *sd;
- int ret;
-
- if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor)))
- return -EINVAL;
- si = &fmd->sensor[index];
-
- client = of_find_i2c_device_by_node(node);
- if (!client)
- return -EPROBE_DEFER;
-
- device_lock(&client->dev);
-
- if (!client->driver ||
- !try_module_get(client->driver->driver.owner)) {
- ret = -EPROBE_DEFER;
- v4l2_info(&fmd->v4l2_dev, "No driver found for %s\n",
- node->full_name);
- goto dev_put;
- }
-
- /* Enable sensor's master clock */
- ret = __fimc_md_set_camclk(fmd, &si->pdata, true);
- if (ret < 0)
- goto mod_put;
- sd = i2c_get_clientdata(client);
-
- ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
- __fimc_md_set_camclk(fmd, &si->pdata, false);
- if (ret < 0)
- goto mod_put;
-
- v4l2_set_subdev_hostdata(sd, &si->pdata);
- if (si->pdata.fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK)
- sd->grp_id = GRP_ID_FIMC_IS_SENSOR;
- else
- sd->grp_id = GRP_ID_SENSOR;
-
- si->subdev = sd;
- v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n",
- sd->name, fmd->num_sensors);
- fmd->num_sensors++;
-
-mod_put:
- module_put(client->driver->driver.owner);
-dev_put:
- device_unlock(&client->dev);
- put_device(&client->dev);
- return ret;
-}
-
/* Parse port node and register as a sub-device any sensor specified there. */
static int fimc_md_parse_port_node(struct fimc_md *fmd,
struct device_node *port,
@@ -460,7 +403,6 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd,
struct device_node *rem, *ep, *np;
struct fimc_source_info *pd;
struct v4l2_of_endpoint endpoint;
- int ret;
u32 val;
pd = &fmd->sensor[index].pdata;
@@ -488,6 +430,8 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd,
if (!of_property_read_u32(rem, "clock-frequency", &val))
pd->clk_frequency = val;
+ else
+ pd->clk_frequency = DEFAULT_SENSOR_CLK_FREQ;
if (pd->clk_frequency == 0) {
v4l2_err(&fmd->v4l2_dev, "Wrong clock frequency at node %s\n",
@@ -527,10 +471,17 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd,
else
pd->fimc_bus_type = pd->sensor_bus_type;
- ret = fimc_md_of_add_sensor(fmd, rem, index);
- of_node_put(rem);
+ if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor)))
+ return -EINVAL;
- return ret;
+ fmd->sensor[index].asd.match_type = V4L2_ASYNC_MATCH_OF;
+ fmd->sensor[index].asd.match.of.node = rem;
+ fmd->async_subdevs[index] = &fmd->sensor[index].asd;
+
+ fmd->num_sensors++;
+
+ of_node_put(rem);
+ return 0;
}
/* Register all SoC external sub-devices */
@@ -886,11 +837,13 @@ static void fimc_md_unregister_entities(struct fimc_md *fmd)
v4l2_device_unregister_subdev(fmd->csis[i].sd);
fmd->csis[i].sd = NULL;
}
- for (i = 0; i < fmd->num_sensors; i++) {
- if (fmd->sensor[i].subdev == NULL)
- continue;
- fimc_md_unregister_sensor(fmd->sensor[i].subdev);
- fmd->sensor[i].subdev = NULL;
+ if (fmd->pdev->dev.of_node == NULL) {
+ for (i = 0; i < fmd->num_sensors; i++) {
+ if (fmd->sensor[i].subdev == NULL)
+ continue;
+ fimc_md_unregister_sensor(fmd->sensor[i].subdev);
+ fmd->sensor[i].subdev = NULL;
+ }
}
if (fmd->fimc_is)
@@ -1225,6 +1178,14 @@ static int __fimc_md_set_camclk(struct fimc_md *fmd,
struct fimc_camclk_info *camclk;
int ret = 0;
+ /*
+ * When device tree is used the sensor drivers are supposed to
+ * control the clock themselves. This whole function will be
+ * removed once S5PV210 platform is converted to the device tree.
+ */
+ if (fmd->pdev->dev.of_node)
+ return 0;
+
if (WARN_ON(si->clk_id >= FIMC_MAX_CAMCLKS) || !fmd || !fmd->pmf)
return -EINVAL;
@@ -1542,6 +1503,56 @@ err:
#define fimc_md_unregister_clk_provider(fmd) (0)
#endif
+static int subdev_notifier_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct fimc_md *fmd = notifier_to_fimc_md(notifier);
+ struct fimc_sensor_info *si = NULL;
+ int i;
+
+ /* Find platform data for this sensor subdev */
+ for (i = 0; i < ARRAY_SIZE(fmd->sensor); i++)
+ if (fmd->sensor[i].asd.match.of.node == subdev->dev->of_node)
+ si = &fmd->sensor[i];
+
+ if (si == NULL)
+ return -EINVAL;
+
+ v4l2_set_subdev_hostdata(subdev, &si->pdata);
+
+ if (si->pdata.fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK)
+ subdev->grp_id = GRP_ID_FIMC_IS_SENSOR;
+ else
+ subdev->grp_id = GRP_ID_SENSOR;
+
+ si->subdev = subdev;
+
+ v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n",
+ subdev->name, fmd->num_sensors);
+
+ fmd->num_sensors++;
+
+ return 0;
+}
+
+static int subdev_notifier_complete(struct v4l2_async_notifier *notifier)
+{
+ struct fimc_md *fmd = notifier_to_fimc_md(notifier);
+ int ret;
+
+ mutex_lock(&fmd->media_dev.graph_mutex);
+
+ ret = fimc_md_create_links(fmd);
+ if (ret < 0)
+ goto unlock;
+
+ ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev);
+unlock:
+ mutex_unlock(&fmd->media_dev.graph_mutex);
+ return ret;
+}
+
static int fimc_md_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1569,12 +1580,6 @@ static int fimc_md_probe(struct platform_device *pdev)
fmd->use_isp = fimc_md_is_isp_available(dev->of_node);
- ret = fimc_md_register_clk_provider(fmd);
- if (ret < 0) {
- v4l2_err(v4l2_dev, "clock provider registration failed\n");
- return ret;
- }
-
ret = v4l2_device_register(dev, &fmd->v4l2_dev);
if (ret < 0) {
v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret);
@@ -1584,64 +1589,86 @@ static int fimc_md_probe(struct platform_device *pdev)
ret = media_device_register(&fmd->media_dev);
if (ret < 0) {
v4l2_err(v4l2_dev, "Failed to register media device: %d\n", ret);
- goto err_md;
+ goto err_v4l2_dev;
}
ret = fimc_md_get_clocks(fmd);
if (ret)
- goto err_clk;
+ goto err_md;
fmd->user_subdev_api = (dev->of_node != NULL);
- /* Protect the media graph while we're registering entities */
- mutex_lock(&fmd->media_dev.graph_mutex);
-
ret = fimc_md_get_pinctrl(fmd);
if (ret < 0) {
if (ret != EPROBE_DEFER)
dev_err(dev, "Failed to get pinctrl: %d\n", ret);
- goto err_unlock;
+ goto err_clk;
}
+ platform_set_drvdata(pdev, fmd);
+
+ /* Protect the media graph while we're registering entities */
+ mutex_lock(&fmd->media_dev.graph_mutex);
+
if (dev->of_node)
ret = fimc_md_register_of_platform_entities(fmd, dev->of_node);
else
ret = bus_for_each_dev(&platform_bus_type, NULL, fmd,
fimc_md_pdev_match);
- if (ret)
- goto err_unlock;
+ if (ret) {
+ mutex_unlock(&fmd->media_dev.graph_mutex);
+ goto err_clk;
+ }
if (dev->platform_data || dev->of_node) {
ret = fimc_md_register_sensor_entities(fmd);
- if (ret)
- goto err_unlock;
+ if (ret) {
+ mutex_unlock(&fmd->media_dev.graph_mutex);
+ goto err_m_ent;
+ }
}
- ret = fimc_md_create_links(fmd);
- if (ret)
- goto err_unlock;
+ mutex_unlock(&fmd->media_dev.graph_mutex);
- ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev);
+ ret = device_create_file(&pdev->dev, &dev_attr_subdev_conf_mode);
if (ret)
- goto err_unlock;
+ goto err_m_ent;
+ /*
+ * FIMC platform devices need to be registered before the sclk_cam
+ * clocks provider, as one of these devices needs to be activated
+ * to enable the clock.
+ */
+ ret = fimc_md_register_clk_provider(fmd);
+ if (ret < 0) {
+ v4l2_err(v4l2_dev, "clock provider registration failed\n");
+ goto err_attr;
+ }
- ret = device_create_file(&pdev->dev, &dev_attr_subdev_conf_mode);
+ fmd->subdev_notifier.subdevs = fmd->async_subdevs;
+ fmd->subdev_notifier.num_subdevs = fmd->num_sensors;
+ fmd->subdev_notifier.bound = subdev_notifier_bound;
+ fmd->subdev_notifier.complete = subdev_notifier_complete;
+ fmd->num_sensors = 0;
+
+ ret = v4l2_async_notifier_register(&fmd->v4l2_dev,
+ &fmd->subdev_notifier);
if (ret)
- goto err_unlock;
+ goto err_clk_p;
- platform_set_drvdata(pdev, fmd);
- mutex_unlock(&fmd->media_dev.graph_mutex);
return 0;
-err_unlock:
- mutex_unlock(&fmd->media_dev.graph_mutex);
+err_clk_p:
+ fimc_md_unregister_clk_provider(fmd);
+err_attr:
+ device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode);
err_clk:
fimc_md_put_clocks(fmd);
+err_m_ent:
fimc_md_unregister_entities(fmd);
- media_device_unregister(&fmd->media_dev);
err_md:
+ media_device_unregister(&fmd->media_dev);
+err_v4l2_dev:
v4l2_device_unregister(&fmd->v4l2_dev);
- fimc_md_unregister_clk_provider(fmd);
return ret;
}
@@ -1653,12 +1680,15 @@ static int fimc_md_remove(struct platform_device *pdev)
return 0;
fimc_md_unregister_clk_provider(fmd);
+ v4l2_async_notifier_unregister(&fmd->subdev_notifier);
+
v4l2_device_unregister(&fmd->v4l2_dev);
device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode);
fimc_md_unregister_entities(fmd);
fimc_md_pipelines_free(fmd);
media_device_unregister(&fmd->media_dev);
fimc_md_put_clocks(fmd);
+
return 0;
}
diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h
index 240ca71..169972a 100644
--- a/drivers/media/platform/exynos4-is/media-dev.h
+++ b/drivers/media/platform/exynos4-is/media-dev.h
@@ -32,8 +32,9 @@
#define PINCTRL_STATE_IDLE "idle"
-#define FIMC_MAX_SENSORS 8
+#define FIMC_MAX_SENSORS 4
#define FIMC_MAX_CAMCLKS 2
+#define DEFAULT_SENSOR_CLK_FREQ 24000000U
/* LCD/ISP Writeback clocks (PIXELASYNCMx) */
enum {
@@ -79,6 +80,7 @@ struct fimc_camclk_info {
/**
* struct fimc_sensor_info - image data source subdev information
* @pdata: sensor's atrributes passed as media device's platform data
+ * @asd: asynchronous subdev registration data structure
* @subdev: image sensor v4l2 subdev
* @host: fimc device the sensor is currently linked to
*
@@ -86,6 +88,7 @@ struct fimc_camclk_info {
*/
struct fimc_sensor_info {
struct fimc_source_info pdata;
+ struct v4l2_async_subdev asd;
struct v4l2_subdev *subdev;
struct fimc_dev *host;
};
@@ -144,6 +147,9 @@ struct fimc_md {
struct cam_clk camclk[FIMC_MAX_CAMCLKS];
} clk_provider;
+ struct v4l2_async_notifier subdev_notifier;
+ struct v4l2_async_subdev *async_subdevs[FIMC_MAX_SENSORS];
+
bool user_subdev_api;
spinlock_t slock;
struct list_head pipelines;
@@ -161,6 +167,11 @@ static inline struct fimc_md *entity_to_fimc_mdev(struct media_entity *me)
container_of(me->parent, struct fimc_md, media_dev);
}
+static inline struct fimc_md *notifier_to_fimc_md(struct v4l2_async_notifier *n)
+{
+ return container_of(n, struct fimc_md, subdev_notifier);
+}
+
static inline void fimc_md_graph_lock(struct exynos_video_entity *ve)
{
mutex_lock(&ve->vdev.entity.parent->graph_mutex);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v2 7/7] exynos4-is: Add support for asynchronous sensor subddevs registration
@ 2013-08-28 15:56 ` Sylwester Nawrocki
0 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-28 15:56 UTC (permalink / raw)
To: linux-arm-kernel
Add support for registering external sensor subdevs using the v4l2-async
API. The async API is used only for sensor subdevs and only for platforms
instantiated from Device Tree.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
Changes since v1:
- register clock provider after registering FIMC devices so the clock
can be actually used right after it is registered.
---
.../devicetree/bindings/media/samsung-fimc.txt | 4 +-
drivers/media/platform/exynos4-is/media-dev.c | 234 +++++++++++---------
drivers/media/platform/exynos4-is/media-dev.h | 13 +-
3 files changed, 146 insertions(+), 105 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
index 9f4d295..daf145d 100644
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -106,8 +106,8 @@ Image sensor nodes
The sensor device nodes should be added to their control bus controller (e.g.
I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
using the common video interfaces bindings, defined in video-interfaces.txt.
-The implementation of this bindings requires clock-frequency property to be
-present in the sensor device nodes.
+An optional clock-frequency property needs to be present in the sensor device
+nodes. Default value when this property is not present is 24 MHz.
Example:
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 6fba5f6..c10dee2 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -27,6 +27,7 @@
#include <linux/pm_runtime.h>
#include <linux/types.h>
#include <linux/slab.h>
+#include <media/v4l2-async.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-of.h>
#include <media/media-device.h>
@@ -221,6 +222,7 @@ static int __fimc_pipeline_open(struct exynos_media_pipeline *ep,
if (ret < 0)
return ret;
}
+
ret = fimc_md_set_camclk(sd, true);
if (ret < 0)
goto err_wbclk;
@@ -381,77 +383,18 @@ static void fimc_md_unregister_sensor(struct v4l2_subdev *sd)
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct i2c_adapter *adapter;
- if (!client)
+ if (!client || client->dev.of_node)
return;
v4l2_device_unregister_subdev(sd);
- if (!client->dev.of_node) {
- adapter = client->adapter;
- i2c_unregister_device(client);
- if (adapter)
- i2c_put_adapter(adapter);
- }
+ adapter = client->adapter;
+ i2c_unregister_device(client);
+ if (adapter)
+ i2c_put_adapter(adapter);
}
#ifdef CONFIG_OF
-/* Register I2C client subdev associated with @node. */
-static int fimc_md_of_add_sensor(struct fimc_md *fmd,
- struct device_node *node, int index)
-{
- struct fimc_sensor_info *si;
- struct i2c_client *client;
- struct v4l2_subdev *sd;
- int ret;
-
- if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor)))
- return -EINVAL;
- si = &fmd->sensor[index];
-
- client = of_find_i2c_device_by_node(node);
- if (!client)
- return -EPROBE_DEFER;
-
- device_lock(&client->dev);
-
- if (!client->driver ||
- !try_module_get(client->driver->driver.owner)) {
- ret = -EPROBE_DEFER;
- v4l2_info(&fmd->v4l2_dev, "No driver found for %s\n",
- node->full_name);
- goto dev_put;
- }
-
- /* Enable sensor's master clock */
- ret = __fimc_md_set_camclk(fmd, &si->pdata, true);
- if (ret < 0)
- goto mod_put;
- sd = i2c_get_clientdata(client);
-
- ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd);
- __fimc_md_set_camclk(fmd, &si->pdata, false);
- if (ret < 0)
- goto mod_put;
-
- v4l2_set_subdev_hostdata(sd, &si->pdata);
- if (si->pdata.fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK)
- sd->grp_id = GRP_ID_FIMC_IS_SENSOR;
- else
- sd->grp_id = GRP_ID_SENSOR;
-
- si->subdev = sd;
- v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n",
- sd->name, fmd->num_sensors);
- fmd->num_sensors++;
-
-mod_put:
- module_put(client->driver->driver.owner);
-dev_put:
- device_unlock(&client->dev);
- put_device(&client->dev);
- return ret;
-}
-
/* Parse port node and register as a sub-device any sensor specified there. */
static int fimc_md_parse_port_node(struct fimc_md *fmd,
struct device_node *port,
@@ -460,7 +403,6 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd,
struct device_node *rem, *ep, *np;
struct fimc_source_info *pd;
struct v4l2_of_endpoint endpoint;
- int ret;
u32 val;
pd = &fmd->sensor[index].pdata;
@@ -488,6 +430,8 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd,
if (!of_property_read_u32(rem, "clock-frequency", &val))
pd->clk_frequency = val;
+ else
+ pd->clk_frequency = DEFAULT_SENSOR_CLK_FREQ;
if (pd->clk_frequency == 0) {
v4l2_err(&fmd->v4l2_dev, "Wrong clock frequency at node %s\n",
@@ -527,10 +471,17 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd,
else
pd->fimc_bus_type = pd->sensor_bus_type;
- ret = fimc_md_of_add_sensor(fmd, rem, index);
- of_node_put(rem);
+ if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor)))
+ return -EINVAL;
- return ret;
+ fmd->sensor[index].asd.match_type = V4L2_ASYNC_MATCH_OF;
+ fmd->sensor[index].asd.match.of.node = rem;
+ fmd->async_subdevs[index] = &fmd->sensor[index].asd;
+
+ fmd->num_sensors++;
+
+ of_node_put(rem);
+ return 0;
}
/* Register all SoC external sub-devices */
@@ -886,11 +837,13 @@ static void fimc_md_unregister_entities(struct fimc_md *fmd)
v4l2_device_unregister_subdev(fmd->csis[i].sd);
fmd->csis[i].sd = NULL;
}
- for (i = 0; i < fmd->num_sensors; i++) {
- if (fmd->sensor[i].subdev == NULL)
- continue;
- fimc_md_unregister_sensor(fmd->sensor[i].subdev);
- fmd->sensor[i].subdev = NULL;
+ if (fmd->pdev->dev.of_node == NULL) {
+ for (i = 0; i < fmd->num_sensors; i++) {
+ if (fmd->sensor[i].subdev == NULL)
+ continue;
+ fimc_md_unregister_sensor(fmd->sensor[i].subdev);
+ fmd->sensor[i].subdev = NULL;
+ }
}
if (fmd->fimc_is)
@@ -1225,6 +1178,14 @@ static int __fimc_md_set_camclk(struct fimc_md *fmd,
struct fimc_camclk_info *camclk;
int ret = 0;
+ /*
+ * When device tree is used the sensor drivers are supposed to
+ * control the clock themselves. This whole function will be
+ * removed once S5PV210 platform is converted to the device tree.
+ */
+ if (fmd->pdev->dev.of_node)
+ return 0;
+
if (WARN_ON(si->clk_id >= FIMC_MAX_CAMCLKS) || !fmd || !fmd->pmf)
return -EINVAL;
@@ -1542,6 +1503,56 @@ err:
#define fimc_md_unregister_clk_provider(fmd) (0)
#endif
+static int subdev_notifier_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct fimc_md *fmd = notifier_to_fimc_md(notifier);
+ struct fimc_sensor_info *si = NULL;
+ int i;
+
+ /* Find platform data for this sensor subdev */
+ for (i = 0; i < ARRAY_SIZE(fmd->sensor); i++)
+ if (fmd->sensor[i].asd.match.of.node == subdev->dev->of_node)
+ si = &fmd->sensor[i];
+
+ if (si == NULL)
+ return -EINVAL;
+
+ v4l2_set_subdev_hostdata(subdev, &si->pdata);
+
+ if (si->pdata.fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK)
+ subdev->grp_id = GRP_ID_FIMC_IS_SENSOR;
+ else
+ subdev->grp_id = GRP_ID_SENSOR;
+
+ si->subdev = subdev;
+
+ v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n",
+ subdev->name, fmd->num_sensors);
+
+ fmd->num_sensors++;
+
+ return 0;
+}
+
+static int subdev_notifier_complete(struct v4l2_async_notifier *notifier)
+{
+ struct fimc_md *fmd = notifier_to_fimc_md(notifier);
+ int ret;
+
+ mutex_lock(&fmd->media_dev.graph_mutex);
+
+ ret = fimc_md_create_links(fmd);
+ if (ret < 0)
+ goto unlock;
+
+ ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev);
+unlock:
+ mutex_unlock(&fmd->media_dev.graph_mutex);
+ return ret;
+}
+
static int fimc_md_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1569,12 +1580,6 @@ static int fimc_md_probe(struct platform_device *pdev)
fmd->use_isp = fimc_md_is_isp_available(dev->of_node);
- ret = fimc_md_register_clk_provider(fmd);
- if (ret < 0) {
- v4l2_err(v4l2_dev, "clock provider registration failed\n");
- return ret;
- }
-
ret = v4l2_device_register(dev, &fmd->v4l2_dev);
if (ret < 0) {
v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret);
@@ -1584,64 +1589,86 @@ static int fimc_md_probe(struct platform_device *pdev)
ret = media_device_register(&fmd->media_dev);
if (ret < 0) {
v4l2_err(v4l2_dev, "Failed to register media device: %d\n", ret);
- goto err_md;
+ goto err_v4l2_dev;
}
ret = fimc_md_get_clocks(fmd);
if (ret)
- goto err_clk;
+ goto err_md;
fmd->user_subdev_api = (dev->of_node != NULL);
- /* Protect the media graph while we're registering entities */
- mutex_lock(&fmd->media_dev.graph_mutex);
-
ret = fimc_md_get_pinctrl(fmd);
if (ret < 0) {
if (ret != EPROBE_DEFER)
dev_err(dev, "Failed to get pinctrl: %d\n", ret);
- goto err_unlock;
+ goto err_clk;
}
+ platform_set_drvdata(pdev, fmd);
+
+ /* Protect the media graph while we're registering entities */
+ mutex_lock(&fmd->media_dev.graph_mutex);
+
if (dev->of_node)
ret = fimc_md_register_of_platform_entities(fmd, dev->of_node);
else
ret = bus_for_each_dev(&platform_bus_type, NULL, fmd,
fimc_md_pdev_match);
- if (ret)
- goto err_unlock;
+ if (ret) {
+ mutex_unlock(&fmd->media_dev.graph_mutex);
+ goto err_clk;
+ }
if (dev->platform_data || dev->of_node) {
ret = fimc_md_register_sensor_entities(fmd);
- if (ret)
- goto err_unlock;
+ if (ret) {
+ mutex_unlock(&fmd->media_dev.graph_mutex);
+ goto err_m_ent;
+ }
}
- ret = fimc_md_create_links(fmd);
- if (ret)
- goto err_unlock;
+ mutex_unlock(&fmd->media_dev.graph_mutex);
- ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev);
+ ret = device_create_file(&pdev->dev, &dev_attr_subdev_conf_mode);
if (ret)
- goto err_unlock;
+ goto err_m_ent;
+ /*
+ * FIMC platform devices need to be registered before the sclk_cam
+ * clocks provider, as one of these devices needs to be activated
+ * to enable the clock.
+ */
+ ret = fimc_md_register_clk_provider(fmd);
+ if (ret < 0) {
+ v4l2_err(v4l2_dev, "clock provider registration failed\n");
+ goto err_attr;
+ }
- ret = device_create_file(&pdev->dev, &dev_attr_subdev_conf_mode);
+ fmd->subdev_notifier.subdevs = fmd->async_subdevs;
+ fmd->subdev_notifier.num_subdevs = fmd->num_sensors;
+ fmd->subdev_notifier.bound = subdev_notifier_bound;
+ fmd->subdev_notifier.complete = subdev_notifier_complete;
+ fmd->num_sensors = 0;
+
+ ret = v4l2_async_notifier_register(&fmd->v4l2_dev,
+ &fmd->subdev_notifier);
if (ret)
- goto err_unlock;
+ goto err_clk_p;
- platform_set_drvdata(pdev, fmd);
- mutex_unlock(&fmd->media_dev.graph_mutex);
return 0;
-err_unlock:
- mutex_unlock(&fmd->media_dev.graph_mutex);
+err_clk_p:
+ fimc_md_unregister_clk_provider(fmd);
+err_attr:
+ device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode);
err_clk:
fimc_md_put_clocks(fmd);
+err_m_ent:
fimc_md_unregister_entities(fmd);
- media_device_unregister(&fmd->media_dev);
err_md:
+ media_device_unregister(&fmd->media_dev);
+err_v4l2_dev:
v4l2_device_unregister(&fmd->v4l2_dev);
- fimc_md_unregister_clk_provider(fmd);
return ret;
}
@@ -1653,12 +1680,15 @@ static int fimc_md_remove(struct platform_device *pdev)
return 0;
fimc_md_unregister_clk_provider(fmd);
+ v4l2_async_notifier_unregister(&fmd->subdev_notifier);
+
v4l2_device_unregister(&fmd->v4l2_dev);
device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode);
fimc_md_unregister_entities(fmd);
fimc_md_pipelines_free(fmd);
media_device_unregister(&fmd->media_dev);
fimc_md_put_clocks(fmd);
+
return 0;
}
diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h
index 240ca71..169972a 100644
--- a/drivers/media/platform/exynos4-is/media-dev.h
+++ b/drivers/media/platform/exynos4-is/media-dev.h
@@ -32,8 +32,9 @@
#define PINCTRL_STATE_IDLE "idle"
-#define FIMC_MAX_SENSORS 8
+#define FIMC_MAX_SENSORS 4
#define FIMC_MAX_CAMCLKS 2
+#define DEFAULT_SENSOR_CLK_FREQ 24000000U
/* LCD/ISP Writeback clocks (PIXELASYNCMx) */
enum {
@@ -79,6 +80,7 @@ struct fimc_camclk_info {
/**
* struct fimc_sensor_info - image data source subdev information
* @pdata: sensor's atrributes passed as media device's platform data
+ * @asd: asynchronous subdev registration data structure
* @subdev: image sensor v4l2 subdev
* @host: fimc device the sensor is currently linked to
*
@@ -86,6 +88,7 @@ struct fimc_camclk_info {
*/
struct fimc_sensor_info {
struct fimc_source_info pdata;
+ struct v4l2_async_subdev asd;
struct v4l2_subdev *subdev;
struct fimc_dev *host;
};
@@ -144,6 +147,9 @@ struct fimc_md {
struct cam_clk camclk[FIMC_MAX_CAMCLKS];
} clk_provider;
+ struct v4l2_async_notifier subdev_notifier;
+ struct v4l2_async_subdev *async_subdevs[FIMC_MAX_SENSORS];
+
bool user_subdev_api;
spinlock_t slock;
struct list_head pipelines;
@@ -161,6 +167,11 @@ static inline struct fimc_md *entity_to_fimc_mdev(struct media_entity *me)
container_of(me->parent, struct fimc_md, media_dev);
}
+static inline struct fimc_md *notifier_to_fimc_md(struct v4l2_async_notifier *n)
+{
+ return container_of(n, struct fimc_md, subdev_notifier);
+}
+
static inline void fimc_md_graph_lock(struct exynos_video_entity *ve)
{
mutex_lock(&ve->vdev.entity.parent->graph_mutex);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH v2 4/7] V4L: s5k6a3: Add support for asynchronous subdev registration
2013-08-28 15:55 ` Sylwester Nawrocki
@ 2013-08-28 16:21 ` Guennadi Liakhovetski
-1 siblings, 0 replies; 20+ messages in thread
From: Guennadi Liakhovetski @ 2013-08-28 16:21 UTC (permalink / raw)
To: Sylwester Nawrocki
Cc: linux-media, mturquette, laurent.pinchart, arun.kk, hverkuil,
sakari.ailus, a.hajda, kyungmin.park, t.figa, linux-arm-kernel
Hi Sylwester,
Just one doubt below
On Wed, 28 Aug 2013, Sylwester Nawrocki wrote:
> This patch converts the driver to use v4l2 asynchronous subdev
> registration API an the clock API to control the external master
> clock directly.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/media/i2c/s5k6a3.c | 36 ++++++++++++++++++++++++++----------
> 1 file changed, 26 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c
> index ba86e24..f65a4f8 100644
> --- a/drivers/media/i2c/s5k6a3.c
> +++ b/drivers/media/i2c/s5k6a3.c
[snip]
> @@ -282,7 +297,7 @@ static int s5k6a3_probe(struct i2c_client *client,
> pm_runtime_no_callbacks(dev);
> pm_runtime_enable(dev);
>
> - return 0;
> + return v4l2_async_register_subdev(sd);
If the above fails - don't you have to do any clean up? E.g. below you do
disable runtime PM and clean up the media entity.
Thanks
Guennadi
> }
>
> static int s5k6a3_remove(struct i2c_client *client)
> @@ -290,6 +305,7 @@ static int s5k6a3_remove(struct i2c_client *client)
> struct v4l2_subdev *sd = i2c_get_clientdata(client);
>
> pm_runtime_disable(&client->dev);
> + v4l2_async_unregister_subdev(sd);
> media_entity_cleanup(&sd->entity);
> return 0;
> }
> --
> 1.7.9.5
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 4/7] V4L: s5k6a3: Add support for asynchronous subdev registration
@ 2013-08-28 16:21 ` Guennadi Liakhovetski
0 siblings, 0 replies; 20+ messages in thread
From: Guennadi Liakhovetski @ 2013-08-28 16:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sylwester,
Just one doubt below
On Wed, 28 Aug 2013, Sylwester Nawrocki wrote:
> This patch converts the driver to use v4l2 asynchronous subdev
> registration API an the clock API to control the external master
> clock directly.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/media/i2c/s5k6a3.c | 36 ++++++++++++++++++++++++++----------
> 1 file changed, 26 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c
> index ba86e24..f65a4f8 100644
> --- a/drivers/media/i2c/s5k6a3.c
> +++ b/drivers/media/i2c/s5k6a3.c
[snip]
> @@ -282,7 +297,7 @@ static int s5k6a3_probe(struct i2c_client *client,
> pm_runtime_no_callbacks(dev);
> pm_runtime_enable(dev);
>
> - return 0;
> + return v4l2_async_register_subdev(sd);
If the above fails - don't you have to do any clean up? E.g. below you do
disable runtime PM and clean up the media entity.
Thanks
Guennadi
> }
>
> static int s5k6a3_remove(struct i2c_client *client)
> @@ -290,6 +305,7 @@ static int s5k6a3_remove(struct i2c_client *client)
> struct v4l2_subdev *sd = i2c_get_clientdata(client);
>
> pm_runtime_disable(&client->dev);
> + v4l2_async_unregister_subdev(sd);
> media_entity_cleanup(&sd->entity);
> return 0;
> }
> --
> 1.7.9.5
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v2 4/7] V4L: s5k6a3: Add support for asynchronous subdev registration
2013-08-28 16:21 ` Guennadi Liakhovetski
@ 2013-08-29 9:47 ` Sylwester Nawrocki
-1 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-29 9:47 UTC (permalink / raw)
To: Guennadi Liakhovetski
Cc: linux-media, mturquette, laurent.pinchart, arun.kk, hverkuil,
sakari.ailus, a.hajda, kyungmin.park, t.figa, linux-arm-kernel
On 08/28/2013 06:21 PM, Guennadi Liakhovetski wrote:
> Hi Sylwester,
>
> Just one doubt below
>
> On Wed, 28 Aug 2013, Sylwester Nawrocki wrote:
>
>> > This patch converts the driver to use v4l2 asynchronous subdev
>> > registration API an the clock API to control the external master
>> > clock directly.
>> >
>> > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> > Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>> > ---
>> > drivers/media/i2c/s5k6a3.c | 36 ++++++++++++++++++++++++++----------
>> > 1 file changed, 26 insertions(+), 10 deletions(-)
>> >
>> > diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c
>> > index ba86e24..f65a4f8 100644
>> > --- a/drivers/media/i2c/s5k6a3.c
>> > +++ b/drivers/media/i2c/s5k6a3.c
> [snip]
>
>> > @@ -282,7 +297,7 @@ static int s5k6a3_probe(struct i2c_client *client,
>> > pm_runtime_no_callbacks(dev);
>> > pm_runtime_enable(dev);
>> >
>> > - return 0;
>> > + return v4l2_async_register_subdev(sd);
>
> If the above fails - don't you have to do any clean up? E.g. below you do
> disable runtime PM and clean up the media entity.
You're right, the clean up steps are missing. Thanks for pointing out,
I've corrected this for the next iteration.
Thanks,
Sylwester
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v2 4/7] V4L: s5k6a3: Add support for asynchronous subdev registration
@ 2013-08-29 9:47 ` Sylwester Nawrocki
0 siblings, 0 replies; 20+ messages in thread
From: Sylwester Nawrocki @ 2013-08-29 9:47 UTC (permalink / raw)
To: linux-arm-kernel
On 08/28/2013 06:21 PM, Guennadi Liakhovetski wrote:
> Hi Sylwester,
>
> Just one doubt below
>
> On Wed, 28 Aug 2013, Sylwester Nawrocki wrote:
>
>> > This patch converts the driver to use v4l2 asynchronous subdev
>> > registration API an the clock API to control the external master
>> > clock directly.
>> >
>> > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> > Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>> > ---
>> > drivers/media/i2c/s5k6a3.c | 36 ++++++++++++++++++++++++++----------
>> > 1 file changed, 26 insertions(+), 10 deletions(-)
>> >
>> > diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c
>> > index ba86e24..f65a4f8 100644
>> > --- a/drivers/media/i2c/s5k6a3.c
>> > +++ b/drivers/media/i2c/s5k6a3.c
> [snip]
>
>> > @@ -282,7 +297,7 @@ static int s5k6a3_probe(struct i2c_client *client,
>> > pm_runtime_no_callbacks(dev);
>> > pm_runtime_enable(dev);
>> >
>> > - return 0;
>> > + return v4l2_async_register_subdev(sd);
>
> If the above fails - don't you have to do any clean up? E.g. below you do
> disable runtime PM and clean up the media entity.
You're right, the clean up steps are missing. Thanks for pointing out,
I've corrected this for the next iteration.
Thanks,
Sylwester
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2013-08-29 9:47 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-28 15:55 [PATCH v2 0/7] Add device tree support for Exynos4412 Trats2 cameras Sylwester Nawrocki
2013-08-28 15:55 ` Sylwester Nawrocki
2013-08-28 15:55 ` [PATCH v2 1/7] V4L: s5c73m3: Add device tree support Sylwester Nawrocki
2013-08-28 15:55 ` Sylwester Nawrocki
2013-08-28 15:55 ` [PATCH v2 2/7] V4L: s5k6a3: Add DT binding documentation Sylwester Nawrocki
2013-08-28 15:55 ` Sylwester Nawrocki
2013-08-28 15:55 ` [PATCH v2 3/7] V4L: Add driver for s5k6a3 image sensor Sylwester Nawrocki
2013-08-28 15:55 ` Sylwester Nawrocki
2013-08-28 15:55 ` [PATCH v2 4/7] V4L: s5k6a3: Add support for asynchronous subdev registration Sylwester Nawrocki
2013-08-28 15:55 ` Sylwester Nawrocki
2013-08-28 16:21 ` Guennadi Liakhovetski
2013-08-28 16:21 ` Guennadi Liakhovetski
2013-08-29 9:47 ` Sylwester Nawrocki
2013-08-29 9:47 ` Sylwester Nawrocki
2013-08-28 15:55 ` [PATCH v2 5/7] exynos4-is: Add clock provider for the external clocks Sylwester Nawrocki
2013-08-28 15:55 ` Sylwester Nawrocki
2013-08-28 15:55 ` [PATCH v2 6/7] exynos4-is: Use external s5k6a3 sensor driver Sylwester Nawrocki
2013-08-28 15:55 ` Sylwester Nawrocki
2013-08-28 15:56 ` [PATCH v2 7/7] exynos4-is: Add support for asynchronous sensor subddevs registration Sylwester Nawrocki
2013-08-28 15:56 ` Sylwester Nawrocki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.