* [PATCH v4 0/3] Qualcomm Resource Power Manager driver
@ 2014-07-15 23:00 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA
This series adds a regulator driver for the Resource Power Manager found in
Qualcomm 8660, 8960 and 8064 based devices.
The RPM driver exposes resources to its child devices, that can be accessed to
implement drivers for the regulators, clocks and bus frequency control that's
owned by the RPM in these devices.
Changes since v3:
- IPC register is acquired through syscon, as it's shared with others
Changes since v2:
- Fix copy-paste error in dt binding
- Correct incomplete move from mfd to soc
- Correct const mistake in regulator driver
Changes since v1:
- Moved rpm driver to drivers/soc
- Extracted resource table structs from rpm struct, as per Srinivas request
- Dropped mode setting support for the regulators for now. Unsure if we need
it and it requires some rework from the codeaurora solution.
- Using set_voltage_sel instead of rolling my own "snapping", as per Marks
request
- Split regulator ops in mV, uV and swtich versions as per Marks request.
- Added devicetree property to enable pull down.
Bjorn Andersson (3):
soc: devicetree: bindings: Add Qualcomm RPM DT binding
soc: qcom-rpm: Driver for the Qualcomm RPM
regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
.../devicetree/bindings/soc/qcom/qcom,rpm.txt | 263 +++++++
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 787 +++++++++++++++++++++
drivers/soc/qcom/Kconfig | 14 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_rpm.c | 596 ++++++++++++++++
include/dt-bindings/soc/qcom,rpm.h | 142 ++++
include/linux/soc/qcom_rpm.h | 12 +
9 files changed, 1828 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
create mode 100644 drivers/soc/qcom/qcom_rpm.c
create mode 100644 include/dt-bindings/soc/qcom,rpm.h
create mode 100644 include/linux/soc/qcom_rpm.h
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 0/3] Qualcomm Resource Power Manager driver
@ 2014-07-15 23:00 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
This series adds a regulator driver for the Resource Power Manager found in
Qualcomm 8660, 8960 and 8064 based devices.
The RPM driver exposes resources to its child devices, that can be accessed to
implement drivers for the regulators, clocks and bus frequency control that's
owned by the RPM in these devices.
Changes since v3:
- IPC register is acquired through syscon, as it's shared with others
Changes since v2:
- Fix copy-paste error in dt binding
- Correct incomplete move from mfd to soc
- Correct const mistake in regulator driver
Changes since v1:
- Moved rpm driver to drivers/soc
- Extracted resource table structs from rpm struct, as per Srinivas request
- Dropped mode setting support for the regulators for now. Unsure if we need
it and it requires some rework from the codeaurora solution.
- Using set_voltage_sel instead of rolling my own "snapping", as per Marks
request
- Split regulator ops in mV, uV and swtich versions as per Marks request.
- Added devicetree property to enable pull down.
Bjorn Andersson (3):
soc: devicetree: bindings: Add Qualcomm RPM DT binding
soc: qcom-rpm: Driver for the Qualcomm RPM
regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
.../devicetree/bindings/soc/qcom/qcom,rpm.txt | 263 +++++++
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 787 +++++++++++++++++++++
drivers/soc/qcom/Kconfig | 14 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_rpm.c | 596 ++++++++++++++++
include/dt-bindings/soc/qcom,rpm.h | 142 ++++
include/linux/soc/qcom_rpm.h | 12 +
9 files changed, 1828 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
create mode 100644 drivers/soc/qcom/qcom_rpm.c
create mode 100644 include/dt-bindings/soc/qcom,rpm.h
create mode 100644 include/linux/soc/qcom_rpm.h
--
1.8.2.2
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 0/3] Qualcomm Resource Power Manager driver
@ 2014-07-15 23:00 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
To: linux-arm-kernel
This series adds a regulator driver for the Resource Power Manager found in
Qualcomm 8660, 8960 and 8064 based devices.
The RPM driver exposes resources to its child devices, that can be accessed to
implement drivers for the regulators, clocks and bus frequency control that's
owned by the RPM in these devices.
Changes since v3:
- IPC register is acquired through syscon, as it's shared with others
Changes since v2:
- Fix copy-paste error in dt binding
- Correct incomplete move from mfd to soc
- Correct const mistake in regulator driver
Changes since v1:
- Moved rpm driver to drivers/soc
- Extracted resource table structs from rpm struct, as per Srinivas request
- Dropped mode setting support for the regulators for now. Unsure if we need
it and it requires some rework from the codeaurora solution.
- Using set_voltage_sel instead of rolling my own "snapping", as per Marks
request
- Split regulator ops in mV, uV and swtich versions as per Marks request.
- Added devicetree property to enable pull down.
Bjorn Andersson (3):
soc: devicetree: bindings: Add Qualcomm RPM DT binding
soc: qcom-rpm: Driver for the Qualcomm RPM
regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
.../devicetree/bindings/soc/qcom/qcom,rpm.txt | 263 +++++++
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 787 +++++++++++++++++++++
drivers/soc/qcom/Kconfig | 14 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_rpm.c | 596 ++++++++++++++++
include/dt-bindings/soc/qcom,rpm.h | 142 ++++
include/linux/soc/qcom_rpm.h | 12 +
9 files changed, 1828 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
create mode 100644 drivers/soc/qcom/qcom_rpm.c
create mode 100644 include/dt-bindings/soc/qcom,rpm.h
create mode 100644 include/linux/soc/qcom_rpm.h
--
1.8.2.2
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
2014-07-15 23:00 ` Bjorn Andersson
(?)
@ 2014-07-15 23:00 ` Bjorn Andersson
-1 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
8960 and 8064 based devices. The binding currently describes the rpm
itself and the regulator subnodes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
.../devicetree/bindings/soc/qcom/qcom,rpm.txt | 263 +++++++++++++++++++++
include/dt-bindings/soc/qcom,rpm.h | 142 +++++++++++
2 files changed, 405 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
create mode 100644 include/dt-bindings/soc/qcom,rpm.h
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
new file mode 100644
index 0000000..ac98ffc
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
@@ -0,0 +1,263 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-apq8064"
+ "qcom,rpm-msm8660"
+ "qcom,rpm-msm8960"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: two entries specifying the physical address and size of the
+ RPM's message ram
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the RPM's:
+ 1. acknowledgement interrupt
+ 2. error interrupt
+ 3. wakeup interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <string-array>
+ Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes. The below bindings specify the set
+of valid subnodes that can operate on these resources.
+
+== Switch-mode Power Supply regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-smps"
+ "qcom,rpm-pm8901-ftsmps"
+ "qcom,rpm-pm8921-smps"
+ "qcom,rpm-pm8921-ftsmps"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom,rpm.h>
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the switch-mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+- qcom,force-mode-none:
+ Usage: optional (default if no other qcom,force-mode is specified)
+ Value type: <empty>
+ Defintion: indicates that the regulator should not be forced to any
+ particular mode
+
+- qcom,force-mode-lpm:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ low-power-mode
+
+- qcom,force-mode-auto:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be automatically pick
+ operating mode
+
+- qcom,force-mode-hpm:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ high-power-mode
+
+- qcom,force-mode-bypass: (only for 8960/8064)
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ bypass mode
+
+- qcom,power-mode-hysteretic:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the power supply should operate in hysteretic
+ mode (defaults to qcom,power-mode-pwm if not specified)
+
+- qcom,power-mode-pwm:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the power supply should operate in pwm mode
+
+Standard regulator bindings are used inside switch mode power supply subnodes.
+Check Documentation/devicetree/bindings/regulator/regulator.txt for more
+details.
+
+== Low-dropout regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-pldo"
+ "qcom,rpm-pm8058-nldo"
+ "qcom,rpm-pm8901-pldo"
+ "qcom,rpm-pm8901-nldo"
+ "qcom,rpm-pm8921-pldo"
+ "qcom,rpm-pm8921-nldo"
+ "qcom,rpm-pm8921-nldo1200"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom,rpm.h>
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,force-mode-none:
+ Usage: optional (default if no other qcom,force-mode is specified)
+ Value type: <empty>
+ Defintion: indicates that the regulator should not be forced to any
+ particular mode
+
+- qcom,force-mode-lpm:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ low-power-mode
+
+- qcom,force-mode-auto:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be automatically pick
+ operating mode
+
+- qcom,force-mode-hpm:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ high-power-mode
+
+- qcom,force-mode-bypass: (only for 8960/8064)
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ bypass mode
+
+Standard regulator bindings are used inside switch low-dropout regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Negative Charge Pump
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-ncp"
+ "qcom,rpm-pm8921-ncp"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom,rpm.h>
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the swith mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+Standard regulator bindings are used inside negative charge pump regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Switch
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-switch"
+ "qcom,rpm-pm8901-switch"
+ "qcom,rpm-pm8921-switch"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom/qcom,rpm.h>
+
+
+= EXAMPLE
+
+ #include <dt-bindings/soc/qcom,rpm.h>
+
+ rpm@108000 {
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&apcs 0x8 2>;
+
+ interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8921_s1: pm8921-s1 {
+ compatible = "qcom,rpm-pm8921-smps";
+ reg = <QCOM_RPM_PM8921_S1>;
+
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+
+ bias-pull-down;
+
+ qcom,switch-mode-frequency = <3200000>;
+ };
+ };
+
diff --git a/include/dt-bindings/soc/qcom,rpm.h b/include/dt-bindings/soc/qcom,rpm.h
new file mode 100644
index 0000000..d9d840b
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,rpm.h
@@ -0,0 +1,142 @@
+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_SOC_QCOM_RPM_H
+#define _DT_BINDINGS_SOC_QCOM_RPM_H
+
+#define QCOM_RPM_APPS_FABRIC_ARB 1
+#define QCOM_RPM_APPS_FABRIC_CLK 2
+#define QCOM_RPM_APPS_FABRIC_HALT 3
+#define QCOM_RPM_APPS_FABRIC_IOCTL 4
+#define QCOM_RPM_APPS_FABRIC_MODE 5
+#define QCOM_RPM_APPS_L2_CACHE_CTL 6
+#define QCOM_RPM_CFPB_CLK 7
+#define QCOM_RPM_CXO_BUFFERS 8
+#define QCOM_RPM_CXO_CLK 9
+#define QCOM_RPM_DAYTONA_FABRIC_CLK 10
+#define QCOM_RPM_DDR_DMM 11
+#define QCOM_RPM_EBI1_CLK 12
+#define QCOM_RPM_HDMI_SWITCH 13
+#define QCOM_RPM_MMFPB_CLK 14
+#define QCOM_RPM_MM_FABRIC_ARB 15
+#define QCOM_RPM_MM_FABRIC_CLK 16
+#define QCOM_RPM_MM_FABRIC_HALT 17
+#define QCOM_RPM_MM_FABRIC_IOCTL 18
+#define QCOM_RPM_MM_FABRIC_MODE 19
+#define QCOM_RPM_PLL_4 20
+#define QCOM_RPM_PM8058_LDO0 21
+#define QCOM_RPM_PM8058_LDO1 22
+#define QCOM_RPM_PM8058_LDO2 23
+#define QCOM_RPM_PM8058_LDO3 24
+#define QCOM_RPM_PM8058_LDO4 25
+#define QCOM_RPM_PM8058_LDO5 26
+#define QCOM_RPM_PM8058_LDO6 27
+#define QCOM_RPM_PM8058_LDO7 28
+#define QCOM_RPM_PM8058_LDO8 29
+#define QCOM_RPM_PM8058_LDO9 30
+#define QCOM_RPM_PM8058_LDO10 31
+#define QCOM_RPM_PM8058_LDO11 32
+#define QCOM_RPM_PM8058_LDO12 33
+#define QCOM_RPM_PM8058_LDO13 34
+#define QCOM_RPM_PM8058_LDO14 35
+#define QCOM_RPM_PM8058_LDO15 36
+#define QCOM_RPM_PM8058_LDO16 37
+#define QCOM_RPM_PM8058_LDO17 38
+#define QCOM_RPM_PM8058_LDO18 39
+#define QCOM_RPM_PM8058_LDO19 40
+#define QCOM_RPM_PM8058_LDO20 41
+#define QCOM_RPM_PM8058_LDO21 42
+#define QCOM_RPM_PM8058_LDO22 43
+#define QCOM_RPM_PM8058_LDO23 44
+#define QCOM_RPM_PM8058_LDO24 45
+#define QCOM_RPM_PM8058_LDO25 46
+#define QCOM_RPM_PM8058_LVS0 47
+#define QCOM_RPM_PM8058_LVS1 48
+#define QCOM_RPM_PM8058_NCP 49
+#define QCOM_RPM_PM8058_SMPS0 50
+#define QCOM_RPM_PM8058_SMPS1 51
+#define QCOM_RPM_PM8058_SMPS2 52
+#define QCOM_RPM_PM8058_SMPS3 53
+#define QCOM_RPM_PM8058_SMPS4 54
+#define QCOM_RPM_PM8821_L1 55
+#define QCOM_RPM_PM8821_S1 56
+#define QCOM_RPM_PM8821_S2 57
+#define QCOM_RPM_PM8901_LDO0 58
+#define QCOM_RPM_PM8901_LDO1 59
+#define QCOM_RPM_PM8901_LDO2 60
+#define QCOM_RPM_PM8901_LDO3 61
+#define QCOM_RPM_PM8901_LDO4 62
+#define QCOM_RPM_PM8901_LDO5 63
+#define QCOM_RPM_PM8901_LDO6 64
+#define QCOM_RPM_PM8901_LVS0 65
+#define QCOM_RPM_PM8901_LVS1 66
+#define QCOM_RPM_PM8901_LVS2 67
+#define QCOM_RPM_PM8901_LVS3 68
+#define QCOM_RPM_PM8901_MVS 69
+#define QCOM_RPM_PM8901_SMPS0 70
+#define QCOM_RPM_PM8901_SMPS1 71
+#define QCOM_RPM_PM8901_SMPS2 72
+#define QCOM_RPM_PM8901_SMPS3 73
+#define QCOM_RPM_PM8901_SMPS4 74
+#define QCOM_RPM_PM8921_CLK1 75
+#define QCOM_RPM_PM8921_CLK2 76
+#define QCOM_RPM_PM8921_L1 77
+#define QCOM_RPM_PM8921_L2 78
+#define QCOM_RPM_PM8921_L3 79
+#define QCOM_RPM_PM8921_L4 80
+#define QCOM_RPM_PM8921_L5 81
+#define QCOM_RPM_PM8921_L6 82
+#define QCOM_RPM_PM8921_L7 83
+#define QCOM_RPM_PM8921_L8 84
+#define QCOM_RPM_PM8921_L9 85
+#define QCOM_RPM_PM8921_L10 86
+#define QCOM_RPM_PM8921_L11 87
+#define QCOM_RPM_PM8921_L12 88
+#define QCOM_RPM_PM8921_L13 89
+#define QCOM_RPM_PM8921_L14 90
+#define QCOM_RPM_PM8921_L15 91
+#define QCOM_RPM_PM8921_L16 92
+#define QCOM_RPM_PM8921_L17 93
+#define QCOM_RPM_PM8921_L18 94
+#define QCOM_RPM_PM8921_L19 95
+#define QCOM_RPM_PM8921_L20 96
+#define QCOM_RPM_PM8921_L21 97
+#define QCOM_RPM_PM8921_L22 98
+#define QCOM_RPM_PM8921_L23 99
+#define QCOM_RPM_PM8921_L24 100
+#define QCOM_RPM_PM8921_L25 101
+#define QCOM_RPM_PM8921_L26 102
+#define QCOM_RPM_PM8921_L27 103
+#define QCOM_RPM_PM8921_L28 104
+#define QCOM_RPM_PM8921_L29 105
+#define QCOM_RPM_PM8921_LVS1 106
+#define QCOM_RPM_PM8921_LVS2 107
+#define QCOM_RPM_PM8921_LVS3 108
+#define QCOM_RPM_PM8921_LVS4 109
+#define QCOM_RPM_PM8921_LVS5 110
+#define QCOM_RPM_PM8921_LVS6 111
+#define QCOM_RPM_PM8921_LVS7 112
+#define QCOM_RPM_PM8921_MVS 113
+#define QCOM_RPM_PM8921_NCP 114
+#define QCOM_RPM_PM8921_S1 115
+#define QCOM_RPM_PM8921_S2 116
+#define QCOM_RPM_PM8921_S3 117
+#define QCOM_RPM_PM8921_S4 118
+#define QCOM_RPM_PM8921_S5 119
+#define QCOM_RPM_PM8921_S6 120
+#define QCOM_RPM_PM8921_S7 121
+#define QCOM_RPM_PM8921_S8 122
+#define QCOM_RPM_PXO_CLK 123
+#define QCOM_RPM_QDSS_CLK 124
+#define QCOM_RPM_SFPB_CLK 125
+#define QCOM_RPM_SMI_CLK 126
+#define QCOM_RPM_SYS_FABRIC_ARB 127
+#define QCOM_RPM_SYS_FABRIC_CLK 128
+#define QCOM_RPM_SYS_FABRIC_HALT 129
+#define QCOM_RPM_SYS_FABRIC_IOCTL 130
+#define QCOM_RPM_SYS_FABRIC_MODE 131
+#define QCOM_RPM_USB_OTG_SWITCH 132
+#define QCOM_RPM_VDDMIN_GPIO 133
+
+#endif
--
1.8.2.2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-07-15 23:00 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
8960 and 8064 based devices. The binding currently describes the rpm
itself and the regulator subnodes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
.../devicetree/bindings/soc/qcom/qcom,rpm.txt | 263 +++++++++++++++++++++
include/dt-bindings/soc/qcom,rpm.h | 142 +++++++++++
2 files changed, 405 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
create mode 100644 include/dt-bindings/soc/qcom,rpm.h
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
new file mode 100644
index 0000000..ac98ffc
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
@@ -0,0 +1,263 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-apq8064"
+ "qcom,rpm-msm8660"
+ "qcom,rpm-msm8960"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: two entries specifying the physical address and size of the
+ RPM's message ram
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the RPM's:
+ 1. acknowledgement interrupt
+ 2. error interrupt
+ 3. wakeup interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <string-array>
+ Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes. The below bindings specify the set
+of valid subnodes that can operate on these resources.
+
+== Switch-mode Power Supply regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-smps"
+ "qcom,rpm-pm8901-ftsmps"
+ "qcom,rpm-pm8921-smps"
+ "qcom,rpm-pm8921-ftsmps"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom,rpm.h>
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the switch-mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+- qcom,force-mode-none:
+ Usage: optional (default if no other qcom,force-mode is specified)
+ Value type: <empty>
+ Defintion: indicates that the regulator should not be forced to any
+ particular mode
+
+- qcom,force-mode-lpm:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ low-power-mode
+
+- qcom,force-mode-auto:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be automatically pick
+ operating mode
+
+- qcom,force-mode-hpm:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ high-power-mode
+
+- qcom,force-mode-bypass: (only for 8960/8064)
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ bypass mode
+
+- qcom,power-mode-hysteretic:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the power supply should operate in hysteretic
+ mode (defaults to qcom,power-mode-pwm if not specified)
+
+- qcom,power-mode-pwm:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the power supply should operate in pwm mode
+
+Standard regulator bindings are used inside switch mode power supply subnodes.
+Check Documentation/devicetree/bindings/regulator/regulator.txt for more
+details.
+
+== Low-dropout regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-pldo"
+ "qcom,rpm-pm8058-nldo"
+ "qcom,rpm-pm8901-pldo"
+ "qcom,rpm-pm8901-nldo"
+ "qcom,rpm-pm8921-pldo"
+ "qcom,rpm-pm8921-nldo"
+ "qcom,rpm-pm8921-nldo1200"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom,rpm.h>
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,force-mode-none:
+ Usage: optional (default if no other qcom,force-mode is specified)
+ Value type: <empty>
+ Defintion: indicates that the regulator should not be forced to any
+ particular mode
+
+- qcom,force-mode-lpm:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ low-power-mode
+
+- qcom,force-mode-auto:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be automatically pick
+ operating mode
+
+- qcom,force-mode-hpm:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ high-power-mode
+
+- qcom,force-mode-bypass: (only for 8960/8064)
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ bypass mode
+
+Standard regulator bindings are used inside switch low-dropout regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Negative Charge Pump
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-ncp"
+ "qcom,rpm-pm8921-ncp"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom,rpm.h>
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the swith mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+Standard regulator bindings are used inside negative charge pump regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Switch
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-switch"
+ "qcom,rpm-pm8901-switch"
+ "qcom,rpm-pm8921-switch"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom/qcom,rpm.h>
+
+
+= EXAMPLE
+
+ #include <dt-bindings/soc/qcom,rpm.h>
+
+ rpm@108000 {
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&apcs 0x8 2>;
+
+ interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8921_s1: pm8921-s1 {
+ compatible = "qcom,rpm-pm8921-smps";
+ reg = <QCOM_RPM_PM8921_S1>;
+
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+
+ bias-pull-down;
+
+ qcom,switch-mode-frequency = <3200000>;
+ };
+ };
+
diff --git a/include/dt-bindings/soc/qcom,rpm.h b/include/dt-bindings/soc/qcom,rpm.h
new file mode 100644
index 0000000..d9d840b
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,rpm.h
@@ -0,0 +1,142 @@
+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_SOC_QCOM_RPM_H
+#define _DT_BINDINGS_SOC_QCOM_RPM_H
+
+#define QCOM_RPM_APPS_FABRIC_ARB 1
+#define QCOM_RPM_APPS_FABRIC_CLK 2
+#define QCOM_RPM_APPS_FABRIC_HALT 3
+#define QCOM_RPM_APPS_FABRIC_IOCTL 4
+#define QCOM_RPM_APPS_FABRIC_MODE 5
+#define QCOM_RPM_APPS_L2_CACHE_CTL 6
+#define QCOM_RPM_CFPB_CLK 7
+#define QCOM_RPM_CXO_BUFFERS 8
+#define QCOM_RPM_CXO_CLK 9
+#define QCOM_RPM_DAYTONA_FABRIC_CLK 10
+#define QCOM_RPM_DDR_DMM 11
+#define QCOM_RPM_EBI1_CLK 12
+#define QCOM_RPM_HDMI_SWITCH 13
+#define QCOM_RPM_MMFPB_CLK 14
+#define QCOM_RPM_MM_FABRIC_ARB 15
+#define QCOM_RPM_MM_FABRIC_CLK 16
+#define QCOM_RPM_MM_FABRIC_HALT 17
+#define QCOM_RPM_MM_FABRIC_IOCTL 18
+#define QCOM_RPM_MM_FABRIC_MODE 19
+#define QCOM_RPM_PLL_4 20
+#define QCOM_RPM_PM8058_LDO0 21
+#define QCOM_RPM_PM8058_LDO1 22
+#define QCOM_RPM_PM8058_LDO2 23
+#define QCOM_RPM_PM8058_LDO3 24
+#define QCOM_RPM_PM8058_LDO4 25
+#define QCOM_RPM_PM8058_LDO5 26
+#define QCOM_RPM_PM8058_LDO6 27
+#define QCOM_RPM_PM8058_LDO7 28
+#define QCOM_RPM_PM8058_LDO8 29
+#define QCOM_RPM_PM8058_LDO9 30
+#define QCOM_RPM_PM8058_LDO10 31
+#define QCOM_RPM_PM8058_LDO11 32
+#define QCOM_RPM_PM8058_LDO12 33
+#define QCOM_RPM_PM8058_LDO13 34
+#define QCOM_RPM_PM8058_LDO14 35
+#define QCOM_RPM_PM8058_LDO15 36
+#define QCOM_RPM_PM8058_LDO16 37
+#define QCOM_RPM_PM8058_LDO17 38
+#define QCOM_RPM_PM8058_LDO18 39
+#define QCOM_RPM_PM8058_LDO19 40
+#define QCOM_RPM_PM8058_LDO20 41
+#define QCOM_RPM_PM8058_LDO21 42
+#define QCOM_RPM_PM8058_LDO22 43
+#define QCOM_RPM_PM8058_LDO23 44
+#define QCOM_RPM_PM8058_LDO24 45
+#define QCOM_RPM_PM8058_LDO25 46
+#define QCOM_RPM_PM8058_LVS0 47
+#define QCOM_RPM_PM8058_LVS1 48
+#define QCOM_RPM_PM8058_NCP 49
+#define QCOM_RPM_PM8058_SMPS0 50
+#define QCOM_RPM_PM8058_SMPS1 51
+#define QCOM_RPM_PM8058_SMPS2 52
+#define QCOM_RPM_PM8058_SMPS3 53
+#define QCOM_RPM_PM8058_SMPS4 54
+#define QCOM_RPM_PM8821_L1 55
+#define QCOM_RPM_PM8821_S1 56
+#define QCOM_RPM_PM8821_S2 57
+#define QCOM_RPM_PM8901_LDO0 58
+#define QCOM_RPM_PM8901_LDO1 59
+#define QCOM_RPM_PM8901_LDO2 60
+#define QCOM_RPM_PM8901_LDO3 61
+#define QCOM_RPM_PM8901_LDO4 62
+#define QCOM_RPM_PM8901_LDO5 63
+#define QCOM_RPM_PM8901_LDO6 64
+#define QCOM_RPM_PM8901_LVS0 65
+#define QCOM_RPM_PM8901_LVS1 66
+#define QCOM_RPM_PM8901_LVS2 67
+#define QCOM_RPM_PM8901_LVS3 68
+#define QCOM_RPM_PM8901_MVS 69
+#define QCOM_RPM_PM8901_SMPS0 70
+#define QCOM_RPM_PM8901_SMPS1 71
+#define QCOM_RPM_PM8901_SMPS2 72
+#define QCOM_RPM_PM8901_SMPS3 73
+#define QCOM_RPM_PM8901_SMPS4 74
+#define QCOM_RPM_PM8921_CLK1 75
+#define QCOM_RPM_PM8921_CLK2 76
+#define QCOM_RPM_PM8921_L1 77
+#define QCOM_RPM_PM8921_L2 78
+#define QCOM_RPM_PM8921_L3 79
+#define QCOM_RPM_PM8921_L4 80
+#define QCOM_RPM_PM8921_L5 81
+#define QCOM_RPM_PM8921_L6 82
+#define QCOM_RPM_PM8921_L7 83
+#define QCOM_RPM_PM8921_L8 84
+#define QCOM_RPM_PM8921_L9 85
+#define QCOM_RPM_PM8921_L10 86
+#define QCOM_RPM_PM8921_L11 87
+#define QCOM_RPM_PM8921_L12 88
+#define QCOM_RPM_PM8921_L13 89
+#define QCOM_RPM_PM8921_L14 90
+#define QCOM_RPM_PM8921_L15 91
+#define QCOM_RPM_PM8921_L16 92
+#define QCOM_RPM_PM8921_L17 93
+#define QCOM_RPM_PM8921_L18 94
+#define QCOM_RPM_PM8921_L19 95
+#define QCOM_RPM_PM8921_L20 96
+#define QCOM_RPM_PM8921_L21 97
+#define QCOM_RPM_PM8921_L22 98
+#define QCOM_RPM_PM8921_L23 99
+#define QCOM_RPM_PM8921_L24 100
+#define QCOM_RPM_PM8921_L25 101
+#define QCOM_RPM_PM8921_L26 102
+#define QCOM_RPM_PM8921_L27 103
+#define QCOM_RPM_PM8921_L28 104
+#define QCOM_RPM_PM8921_L29 105
+#define QCOM_RPM_PM8921_LVS1 106
+#define QCOM_RPM_PM8921_LVS2 107
+#define QCOM_RPM_PM8921_LVS3 108
+#define QCOM_RPM_PM8921_LVS4 109
+#define QCOM_RPM_PM8921_LVS5 110
+#define QCOM_RPM_PM8921_LVS6 111
+#define QCOM_RPM_PM8921_LVS7 112
+#define QCOM_RPM_PM8921_MVS 113
+#define QCOM_RPM_PM8921_NCP 114
+#define QCOM_RPM_PM8921_S1 115
+#define QCOM_RPM_PM8921_S2 116
+#define QCOM_RPM_PM8921_S3 117
+#define QCOM_RPM_PM8921_S4 118
+#define QCOM_RPM_PM8921_S5 119
+#define QCOM_RPM_PM8921_S6 120
+#define QCOM_RPM_PM8921_S7 121
+#define QCOM_RPM_PM8921_S8 122
+#define QCOM_RPM_PXO_CLK 123
+#define QCOM_RPM_QDSS_CLK 124
+#define QCOM_RPM_SFPB_CLK 125
+#define QCOM_RPM_SMI_CLK 126
+#define QCOM_RPM_SYS_FABRIC_ARB 127
+#define QCOM_RPM_SYS_FABRIC_CLK 128
+#define QCOM_RPM_SYS_FABRIC_HALT 129
+#define QCOM_RPM_SYS_FABRIC_IOCTL 130
+#define QCOM_RPM_SYS_FABRIC_MODE 131
+#define QCOM_RPM_USB_OTG_SWITCH 132
+#define QCOM_RPM_VDDMIN_GPIO 133
+
+#endif
--
1.8.2.2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-07-15 23:00 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
To: linux-arm-kernel
Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
8960 and 8064 based devices. The binding currently describes the rpm
itself and the regulator subnodes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
.../devicetree/bindings/soc/qcom/qcom,rpm.txt | 263 +++++++++++++++++++++
include/dt-bindings/soc/qcom,rpm.h | 142 +++++++++++
2 files changed, 405 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
create mode 100644 include/dt-bindings/soc/qcom,rpm.h
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
new file mode 100644
index 0000000..ac98ffc
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
@@ -0,0 +1,263 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-apq8064"
+ "qcom,rpm-msm8660"
+ "qcom,rpm-msm8960"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: two entries specifying the physical address and size of the
+ RPM's message ram
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the RPM's:
+ 1. acknowledgement interrupt
+ 2. error interrupt
+ 3. wakeup interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <string-array>
+ Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes. The below bindings specify the set
+of valid subnodes that can operate on these resources.
+
+== Switch-mode Power Supply regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-smps"
+ "qcom,rpm-pm8901-ftsmps"
+ "qcom,rpm-pm8921-smps"
+ "qcom,rpm-pm8921-ftsmps"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom,rpm.h>
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the switch-mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+- qcom,force-mode-none:
+ Usage: optional (default if no other qcom,force-mode is specified)
+ Value type: <empty>
+ Defintion: indicates that the regulator should not be forced to any
+ particular mode
+
+- qcom,force-mode-lpm:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ low-power-mode
+
+- qcom,force-mode-auto:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be automatically pick
+ operating mode
+
+- qcom,force-mode-hpm:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ high-power-mode
+
+- qcom,force-mode-bypass: (only for 8960/8064)
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ bypass mode
+
+- qcom,power-mode-hysteretic:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the power supply should operate in hysteretic
+ mode (defaults to qcom,power-mode-pwm if not specified)
+
+- qcom,power-mode-pwm:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the power supply should operate in pwm mode
+
+Standard regulator bindings are used inside switch mode power supply subnodes.
+Check Documentation/devicetree/bindings/regulator/regulator.txt for more
+details.
+
+== Low-dropout regulator
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-pldo"
+ "qcom,rpm-pm8058-nldo"
+ "qcom,rpm-pm8901-pldo"
+ "qcom,rpm-pm8901-nldo"
+ "qcom,rpm-pm8921-pldo"
+ "qcom,rpm-pm8921-nldo"
+ "qcom,rpm-pm8921-nldo1200"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom,rpm.h>
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <empty>
+ Definition: enable pull down of the regulator when inactive
+
+- qcom,force-mode-none:
+ Usage: optional (default if no other qcom,force-mode is specified)
+ Value type: <empty>
+ Defintion: indicates that the regulator should not be forced to any
+ particular mode
+
+- qcom,force-mode-lpm:
+ Usage: optional
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ low-power-mode
+
+- qcom,force-mode-auto:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be automatically pick
+ operating mode
+
+- qcom,force-mode-hpm:
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ high-power-mode
+
+- qcom,force-mode-bypass: (only for 8960/8064)
+ Usage: optional (only available for 8960/8064)
+ Value type: <empty>
+ Definition: indicates that the regulator should be forced to operate in
+ bypass mode
+
+Standard regulator bindings are used inside switch low-dropout regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Negative Charge Pump
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-ncp"
+ "qcom,rpm-pm8921-ncp"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom,rpm.h>
+
+- qcom,switch-mode-frequency:
+ Usage: required
+ Value type: <u32>
+ Definition: Frequency (Hz) of the swith mode power supply;
+ must be one of:
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
+ 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
+ 1480000, 1370000, 1280000, 1200000
+
+Standard regulator bindings are used inside negative charge pump regulator
+subnodes. Check Documentation/devicetree/bindings/regulator/regulator.txt for
+more details.
+
+== Switch
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-pm8058-switch"
+ "qcom,rpm-pm8901-switch"
+ "qcom,rpm-pm8921-switch"
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: resource as defined in <dt-bindings/soc/qcom/qcom,rpm.h>
+
+
+= EXAMPLE
+
+ #include <dt-bindings/soc/qcom,rpm.h>
+
+ rpm at 108000 {
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&apcs 0x8 2>;
+
+ interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8921_s1: pm8921-s1 {
+ compatible = "qcom,rpm-pm8921-smps";
+ reg = <QCOM_RPM_PM8921_S1>;
+
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+
+ bias-pull-down;
+
+ qcom,switch-mode-frequency = <3200000>;
+ };
+ };
+
diff --git a/include/dt-bindings/soc/qcom,rpm.h b/include/dt-bindings/soc/qcom,rpm.h
new file mode 100644
index 0000000..d9d840b
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,rpm.h
@@ -0,0 +1,142 @@
+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_SOC_QCOM_RPM_H
+#define _DT_BINDINGS_SOC_QCOM_RPM_H
+
+#define QCOM_RPM_APPS_FABRIC_ARB 1
+#define QCOM_RPM_APPS_FABRIC_CLK 2
+#define QCOM_RPM_APPS_FABRIC_HALT 3
+#define QCOM_RPM_APPS_FABRIC_IOCTL 4
+#define QCOM_RPM_APPS_FABRIC_MODE 5
+#define QCOM_RPM_APPS_L2_CACHE_CTL 6
+#define QCOM_RPM_CFPB_CLK 7
+#define QCOM_RPM_CXO_BUFFERS 8
+#define QCOM_RPM_CXO_CLK 9
+#define QCOM_RPM_DAYTONA_FABRIC_CLK 10
+#define QCOM_RPM_DDR_DMM 11
+#define QCOM_RPM_EBI1_CLK 12
+#define QCOM_RPM_HDMI_SWITCH 13
+#define QCOM_RPM_MMFPB_CLK 14
+#define QCOM_RPM_MM_FABRIC_ARB 15
+#define QCOM_RPM_MM_FABRIC_CLK 16
+#define QCOM_RPM_MM_FABRIC_HALT 17
+#define QCOM_RPM_MM_FABRIC_IOCTL 18
+#define QCOM_RPM_MM_FABRIC_MODE 19
+#define QCOM_RPM_PLL_4 20
+#define QCOM_RPM_PM8058_LDO0 21
+#define QCOM_RPM_PM8058_LDO1 22
+#define QCOM_RPM_PM8058_LDO2 23
+#define QCOM_RPM_PM8058_LDO3 24
+#define QCOM_RPM_PM8058_LDO4 25
+#define QCOM_RPM_PM8058_LDO5 26
+#define QCOM_RPM_PM8058_LDO6 27
+#define QCOM_RPM_PM8058_LDO7 28
+#define QCOM_RPM_PM8058_LDO8 29
+#define QCOM_RPM_PM8058_LDO9 30
+#define QCOM_RPM_PM8058_LDO10 31
+#define QCOM_RPM_PM8058_LDO11 32
+#define QCOM_RPM_PM8058_LDO12 33
+#define QCOM_RPM_PM8058_LDO13 34
+#define QCOM_RPM_PM8058_LDO14 35
+#define QCOM_RPM_PM8058_LDO15 36
+#define QCOM_RPM_PM8058_LDO16 37
+#define QCOM_RPM_PM8058_LDO17 38
+#define QCOM_RPM_PM8058_LDO18 39
+#define QCOM_RPM_PM8058_LDO19 40
+#define QCOM_RPM_PM8058_LDO20 41
+#define QCOM_RPM_PM8058_LDO21 42
+#define QCOM_RPM_PM8058_LDO22 43
+#define QCOM_RPM_PM8058_LDO23 44
+#define QCOM_RPM_PM8058_LDO24 45
+#define QCOM_RPM_PM8058_LDO25 46
+#define QCOM_RPM_PM8058_LVS0 47
+#define QCOM_RPM_PM8058_LVS1 48
+#define QCOM_RPM_PM8058_NCP 49
+#define QCOM_RPM_PM8058_SMPS0 50
+#define QCOM_RPM_PM8058_SMPS1 51
+#define QCOM_RPM_PM8058_SMPS2 52
+#define QCOM_RPM_PM8058_SMPS3 53
+#define QCOM_RPM_PM8058_SMPS4 54
+#define QCOM_RPM_PM8821_L1 55
+#define QCOM_RPM_PM8821_S1 56
+#define QCOM_RPM_PM8821_S2 57
+#define QCOM_RPM_PM8901_LDO0 58
+#define QCOM_RPM_PM8901_LDO1 59
+#define QCOM_RPM_PM8901_LDO2 60
+#define QCOM_RPM_PM8901_LDO3 61
+#define QCOM_RPM_PM8901_LDO4 62
+#define QCOM_RPM_PM8901_LDO5 63
+#define QCOM_RPM_PM8901_LDO6 64
+#define QCOM_RPM_PM8901_LVS0 65
+#define QCOM_RPM_PM8901_LVS1 66
+#define QCOM_RPM_PM8901_LVS2 67
+#define QCOM_RPM_PM8901_LVS3 68
+#define QCOM_RPM_PM8901_MVS 69
+#define QCOM_RPM_PM8901_SMPS0 70
+#define QCOM_RPM_PM8901_SMPS1 71
+#define QCOM_RPM_PM8901_SMPS2 72
+#define QCOM_RPM_PM8901_SMPS3 73
+#define QCOM_RPM_PM8901_SMPS4 74
+#define QCOM_RPM_PM8921_CLK1 75
+#define QCOM_RPM_PM8921_CLK2 76
+#define QCOM_RPM_PM8921_L1 77
+#define QCOM_RPM_PM8921_L2 78
+#define QCOM_RPM_PM8921_L3 79
+#define QCOM_RPM_PM8921_L4 80
+#define QCOM_RPM_PM8921_L5 81
+#define QCOM_RPM_PM8921_L6 82
+#define QCOM_RPM_PM8921_L7 83
+#define QCOM_RPM_PM8921_L8 84
+#define QCOM_RPM_PM8921_L9 85
+#define QCOM_RPM_PM8921_L10 86
+#define QCOM_RPM_PM8921_L11 87
+#define QCOM_RPM_PM8921_L12 88
+#define QCOM_RPM_PM8921_L13 89
+#define QCOM_RPM_PM8921_L14 90
+#define QCOM_RPM_PM8921_L15 91
+#define QCOM_RPM_PM8921_L16 92
+#define QCOM_RPM_PM8921_L17 93
+#define QCOM_RPM_PM8921_L18 94
+#define QCOM_RPM_PM8921_L19 95
+#define QCOM_RPM_PM8921_L20 96
+#define QCOM_RPM_PM8921_L21 97
+#define QCOM_RPM_PM8921_L22 98
+#define QCOM_RPM_PM8921_L23 99
+#define QCOM_RPM_PM8921_L24 100
+#define QCOM_RPM_PM8921_L25 101
+#define QCOM_RPM_PM8921_L26 102
+#define QCOM_RPM_PM8921_L27 103
+#define QCOM_RPM_PM8921_L28 104
+#define QCOM_RPM_PM8921_L29 105
+#define QCOM_RPM_PM8921_LVS1 106
+#define QCOM_RPM_PM8921_LVS2 107
+#define QCOM_RPM_PM8921_LVS3 108
+#define QCOM_RPM_PM8921_LVS4 109
+#define QCOM_RPM_PM8921_LVS5 110
+#define QCOM_RPM_PM8921_LVS6 111
+#define QCOM_RPM_PM8921_LVS7 112
+#define QCOM_RPM_PM8921_MVS 113
+#define QCOM_RPM_PM8921_NCP 114
+#define QCOM_RPM_PM8921_S1 115
+#define QCOM_RPM_PM8921_S2 116
+#define QCOM_RPM_PM8921_S3 117
+#define QCOM_RPM_PM8921_S4 118
+#define QCOM_RPM_PM8921_S5 119
+#define QCOM_RPM_PM8921_S6 120
+#define QCOM_RPM_PM8921_S7 121
+#define QCOM_RPM_PM8921_S8 122
+#define QCOM_RPM_PXO_CLK 123
+#define QCOM_RPM_QDSS_CLK 124
+#define QCOM_RPM_SFPB_CLK 125
+#define QCOM_RPM_SMI_CLK 126
+#define QCOM_RPM_SYS_FABRIC_ARB 127
+#define QCOM_RPM_SYS_FABRIC_CLK 128
+#define QCOM_RPM_SYS_FABRIC_HALT 129
+#define QCOM_RPM_SYS_FABRIC_IOCTL 130
+#define QCOM_RPM_SYS_FABRIC_MODE 131
+#define QCOM_RPM_USB_OTG_SWITCH 132
+#define QCOM_RPM_VDDMIN_GPIO 133
+
+#endif
--
1.8.2.2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v4 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
2014-07-15 23:00 ` Bjorn Andersson
(?)
@ 2014-07-15 23:00 ` Bjorn Andersson
-1 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
and 8064 based devices. The driver exposes resources that child drivers
can operate on; to implementing regulator, clock and bus frequency
drivers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/soc/qcom/Kconfig | 14 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_rpm.c | 596 +++++++++++++++++++++++++++++++++++++++++++
include/linux/soc/qcom_rpm.h | 12 +
4 files changed, 623 insertions(+)
create mode 100644 drivers/soc/qcom/qcom_rpm.c
create mode 100644 include/linux/soc/qcom_rpm.h
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 7bd2c94..a8c2a96 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -9,3 +9,17 @@ config QCOM_GSBI
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
+config QCOM_RPM
+ tristate "Qualcomm Resource Power Manager (RPM)"
+ depends on ARCH_QCOM && OF
+ help
+ If you say yes to this option, support will be included for the
+ Resource Power Manager system found in the Qualcomm 8660, 8960 and
+ 8064 based devices.
+
+ This is required to access many regulators, clocks and bus
+ frequencies controlled by the RPM on these devices.
+
+ Say M here if you want to include support for the Qualcomm RPM as a
+ module. This will build a module called "qcom_rpm".
+
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 4389012..e7706e8 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
+obj-$(CONFIG_QCOM_RPM) += qcom_rpm.o
diff --git a/drivers/soc/qcom/qcom_rpm.c b/drivers/soc/qcom/qcom_rpm.c
new file mode 100644
index 0000000..228665b
--- /dev/null
+++ b/drivers/soc/qcom/qcom_rpm.c
@@ -0,0 +1,596 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/soc/qcom_rpm.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/soc/qcom,rpm.h>
+
+struct qcom_rpm_resource {
+ unsigned target_id;
+ unsigned status_id;
+ unsigned select_id;
+ unsigned size;
+};
+
+struct qcom_rpm_data {
+ u32 version;
+ const struct qcom_rpm_resource *resource_table;
+ unsigned n_resources;
+};
+
+struct qcom_rpm {
+ struct device *dev;
+ struct regmap *ipc_regmap;
+ unsigned ipc_offset;
+ unsigned ipc_bit;
+
+ struct completion ack;
+ struct mutex lock;
+
+ void __iomem *status_regs;
+ void __iomem *ctrl_regs;
+ void __iomem *req_regs;
+
+ u32 ack_status;
+
+ const struct qcom_rpm_data *data;
+};
+
+#define RPM_STATUS_REG(rpm, i) ((rpm)->status_regs + (i) * 4)
+#define RPM_CTRL_REG(rpm, i) ((rpm)->ctrl_regs + (i) * 4)
+#define RPM_REQ_REG(rpm, i) ((rpm)->req_regs + (i) * 4)
+
+#define RPM_REQUEST_TIMEOUT (5 * HZ)
+
+#define RPM_REQUEST_CONTEXT 3
+#define RPM_REQ_SELECT 11
+#define RPM_ACK_CONTEXT 15
+#define RPM_ACK_SELECTOR 23
+#define RPM_SELECT_SIZE 7
+
+#define RPM_ACTIVE_STATE BIT(0)
+#define RPM_NOTIFICATION BIT(30)
+#define RPM_REJECTED BIT(31)
+
+#define RPM_SIGNAL BIT(2)
+
+static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 21 },
+ [QCOM_RPM_PM8921_S1] = { 116, 31, 30, 2 },
+ [QCOM_RPM_PM8921_S2] = { 118, 33, 31, 2 },
+ [QCOM_RPM_PM8921_S3] = { 120, 35, 32, 2 },
+ [QCOM_RPM_PM8921_S4] = { 122, 37, 33, 2 },
+ [QCOM_RPM_PM8921_S5] = { 124, 39, 34, 2 },
+ [QCOM_RPM_PM8921_S6] = { 126, 41, 35, 2 },
+ [QCOM_RPM_PM8921_S7] = { 128, 43, 36, 2 },
+ [QCOM_RPM_PM8921_S8] = { 130, 45, 37, 2 },
+ [QCOM_RPM_PM8921_L1] = { 132, 47, 38, 2 },
+ [QCOM_RPM_PM8921_L2] = { 134, 49, 39, 2 },
+ [QCOM_RPM_PM8921_L3] = { 136, 51, 40, 2 },
+ [QCOM_RPM_PM8921_L4] = { 138, 53, 41, 2 },
+ [QCOM_RPM_PM8921_L5] = { 140, 55, 42, 2 },
+ [QCOM_RPM_PM8921_L6] = { 142, 57, 43, 2 },
+ [QCOM_RPM_PM8921_L7] = { 144, 59, 44, 2 },
+ [QCOM_RPM_PM8921_L8] = { 146, 61, 45, 2 },
+ [QCOM_RPM_PM8921_L9] = { 148, 63, 46, 2 },
+ [QCOM_RPM_PM8921_L10] = { 150, 65, 47, 2 },
+ [QCOM_RPM_PM8921_L11] = { 152, 67, 48, 2 },
+ [QCOM_RPM_PM8921_L12] = { 154, 69, 49, 2 },
+ [QCOM_RPM_PM8921_L13] = { 156, 71, 50, 2 },
+ [QCOM_RPM_PM8921_L14] = { 158, 73, 51, 2 },
+ [QCOM_RPM_PM8921_L15] = { 160, 75, 52, 2 },
+ [QCOM_RPM_PM8921_L16] = { 162, 77, 53, 2 },
+ [QCOM_RPM_PM8921_L17] = { 164, 79, 54, 2 },
+ [QCOM_RPM_PM8921_L18] = { 166, 81, 55, 2 },
+ [QCOM_RPM_PM8921_L19] = { 168, 83, 56, 2 },
+ [QCOM_RPM_PM8921_L20] = { 170, 85, 57, 2 },
+ [QCOM_RPM_PM8921_L21] = { 172, 87, 58, 2 },
+ [QCOM_RPM_PM8921_L22] = { 174, 89, 59, 2 },
+ [QCOM_RPM_PM8921_L23] = { 176, 91, 60, 2 },
+ [QCOM_RPM_PM8921_L24] = { 178, 93, 61, 2 },
+ [QCOM_RPM_PM8921_L25] = { 180, 95, 62, 2 },
+ [QCOM_RPM_PM8921_L26] = { 182, 97, 63, 2 },
+ [QCOM_RPM_PM8921_L27] = { 184, 99, 64, 2 },
+ [QCOM_RPM_PM8921_L28] = { 186, 101, 65, 2 },
+ [QCOM_RPM_PM8921_L29] = { 188, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 190, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 192, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 194, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 195, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 196, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 197, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 198, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 199, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 200, 115, 75, 1 },
+ [QCOM_RPM_PM8821_S1] = { 201, 116, 76, 2 },
+ [QCOM_RPM_PM8821_S2] = { 203, 118, 77, 2 },
+ [QCOM_RPM_PM8821_L1] = { 205, 120, 78, 2 },
+ [QCOM_RPM_PM8921_NCP] = { 207, 122, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 209, 124, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
+ [QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
+};
+
+static const struct qcom_rpm_data apq8064_template = {
+ .version = 3,
+ .resource_table = apq8064_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 32, 12, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 33, 13, 6, 1 },
+ [QCOM_RPM_PLL_4] = { 34, 14, 7, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 35, 15, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 36, 16, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 37, 17, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 38, 18, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 39, 19, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 40, 20, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 41, 21, 14, 1 },
+ [QCOM_RPM_SMI_CLK] = { 42, 22, 15, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 43, 23, 16, 1 },
+ [QCOM_RPM_APPS_L2_CACHE_CTL] = { 44, 24, 17, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 45, 25, 18, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 47, 26, 19, 3 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 51, 28, 21, 6 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 63, 29, 22, 2 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 65, 30, 23, 3 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 69, 32, 25, 22 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 105, 33, 26, 2 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 107, 34, 27, 3 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 111, 36, 29, 23 },
+ [QCOM_RPM_PM8901_SMPS0] = { 134, 37, 30, 2 },
+ [QCOM_RPM_PM8901_SMPS1] = { 136, 39, 31, 2 },
+ [QCOM_RPM_PM8901_SMPS2] = { 138, 41, 32, 2 },
+ [QCOM_RPM_PM8901_SMPS3] = { 140, 43, 33, 2 },
+ [QCOM_RPM_PM8901_SMPS4] = { 142, 45, 34, 2 },
+ [QCOM_RPM_PM8901_LDO0] = { 144, 47, 35, 2 },
+ [QCOM_RPM_PM8901_LDO1] = { 146, 49, 36, 2 },
+ [QCOM_RPM_PM8901_LDO2] = { 148, 51, 37, 2 },
+ [QCOM_RPM_PM8901_LDO3] = { 150, 53, 38, 2 },
+ [QCOM_RPM_PM8901_LDO4] = { 152, 55, 39, 2 },
+ [QCOM_RPM_PM8901_LDO5] = { 154, 57, 40, 2 },
+ [QCOM_RPM_PM8901_LDO6] = { 156, 59, 41, 2 },
+ [QCOM_RPM_PM8901_LVS0] = { 158, 61, 42, 1 },
+ [QCOM_RPM_PM8901_LVS1] = { 159, 62, 43, 1 },
+ [QCOM_RPM_PM8901_LVS2] = { 160, 63, 44, 1 },
+ [QCOM_RPM_PM8901_LVS3] = { 161, 64, 45, 1 },
+ [QCOM_RPM_PM8901_MVS] = { 162, 65, 46, 1 },
+ [QCOM_RPM_PM8058_SMPS0] = { 163, 66, 47, 2 },
+ [QCOM_RPM_PM8058_SMPS1] = { 165, 68, 48, 2 },
+ [QCOM_RPM_PM8058_SMPS2] = { 167, 70, 49, 2 },
+ [QCOM_RPM_PM8058_SMPS3] = { 169, 72, 50, 2 },
+ [QCOM_RPM_PM8058_SMPS4] = { 171, 74, 51, 2 },
+ [QCOM_RPM_PM8058_LDO0] = { 173, 76, 52, 2 },
+ [QCOM_RPM_PM8058_LDO1] = { 175, 78, 53, 2 },
+ [QCOM_RPM_PM8058_LDO2] = { 177, 80, 54, 2 },
+ [QCOM_RPM_PM8058_LDO3] = { 179, 82, 55, 2 },
+ [QCOM_RPM_PM8058_LDO4] = { 181, 84, 56, 2 },
+ [QCOM_RPM_PM8058_LDO5] = { 183, 86, 57, 2 },
+ [QCOM_RPM_PM8058_LDO6] = { 185, 88, 58, 2 },
+ [QCOM_RPM_PM8058_LDO7] = { 187, 90, 59, 2 },
+ [QCOM_RPM_PM8058_LDO8] = { 189, 92, 60, 2 },
+ [QCOM_RPM_PM8058_LDO9] = { 191, 94, 61, 2 },
+ [QCOM_RPM_PM8058_LDO10] = { 193, 96, 62, 2 },
+ [QCOM_RPM_PM8058_LDO11] = { 195, 98, 63, 2 },
+ [QCOM_RPM_PM8058_LDO12] = { 197, 100, 64, 2 },
+ [QCOM_RPM_PM8058_LDO13] = { 199, 102, 65, 2 },
+ [QCOM_RPM_PM8058_LDO14] = { 201, 104, 66, 2 },
+ [QCOM_RPM_PM8058_LDO15] = { 203, 106, 67, 2 },
+ [QCOM_RPM_PM8058_LDO16] = { 205, 108, 68, 2 },
+ [QCOM_RPM_PM8058_LDO17] = { 207, 110, 69, 2 },
+ [QCOM_RPM_PM8058_LDO18] = { 209, 112, 70, 2 },
+ [QCOM_RPM_PM8058_LDO19] = { 211, 114, 71, 2 },
+ [QCOM_RPM_PM8058_LDO20] = { 213, 116, 72, 2 },
+ [QCOM_RPM_PM8058_LDO21] = { 215, 118, 73, 2 },
+ [QCOM_RPM_PM8058_LDO22] = { 217, 120, 74, 2 },
+ [QCOM_RPM_PM8058_LDO23] = { 219, 122, 75, 2 },
+ [QCOM_RPM_PM8058_LDO24] = { 221, 124, 76, 2 },
+ [QCOM_RPM_PM8058_LDO25] = { 223, 126, 77, 2 },
+ [QCOM_RPM_PM8058_LVS0] = { 225, 128, 78, 1 },
+ [QCOM_RPM_PM8058_LVS1] = { 226, 129, 79, 1 },
+ [QCOM_RPM_PM8058_NCP] = { 227, 130, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 229, 132, 81, 1 },
+};
+
+static const struct qcom_rpm_data msm8660_template = {
+ .version = -1,
+ .resource_table = msm8660_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 29 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 88, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 90, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 93, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 94, 30, 29, 23 },
+ [QCOM_RPM_PM8921_S1] = { 117, 31, 30, 2 },
+ [QCOM_RPM_PM8921_S2] = { 119, 33, 31, 2 },
+ [QCOM_RPM_PM8921_S3] = { 121, 35, 32, 2 },
+ [QCOM_RPM_PM8921_S4] = { 123, 37, 33, 2 },
+ [QCOM_RPM_PM8921_S5] = { 125, 39, 34, 2 },
+ [QCOM_RPM_PM8921_S6] = { 127, 41, 35, 2 },
+ [QCOM_RPM_PM8921_S7] = { 129, 43, 36, 2 },
+ [QCOM_RPM_PM8921_S8] = { 131, 45, 37, 2 },
+ [QCOM_RPM_PM8921_L1] = { 133, 47, 38, 2 },
+ [QCOM_RPM_PM8921_L2] = { 135, 49, 39, 2 },
+ [QCOM_RPM_PM8921_L3] = { 137, 51, 40, 2 },
+ [QCOM_RPM_PM8921_L4] = { 139, 53, 41, 2 },
+ [QCOM_RPM_PM8921_L5] = { 141, 55, 42, 2 },
+ [QCOM_RPM_PM8921_L6] = { 143, 57, 43, 2 },
+ [QCOM_RPM_PM8921_L7] = { 145, 59, 44, 2 },
+ [QCOM_RPM_PM8921_L8] = { 147, 61, 45, 2 },
+ [QCOM_RPM_PM8921_L9] = { 149, 63, 46, 2 },
+ [QCOM_RPM_PM8921_L10] = { 151, 65, 47, 2 },
+ [QCOM_RPM_PM8921_L11] = { 153, 67, 48, 2 },
+ [QCOM_RPM_PM8921_L12] = { 155, 69, 49, 2 },
+ [QCOM_RPM_PM8921_L13] = { 157, 71, 50, 2 },
+ [QCOM_RPM_PM8921_L14] = { 159, 73, 51, 2 },
+ [QCOM_RPM_PM8921_L15] = { 161, 75, 52, 2 },
+ [QCOM_RPM_PM8921_L16] = { 163, 77, 53, 2 },
+ [QCOM_RPM_PM8921_L17] = { 165, 79, 54, 2 },
+ [QCOM_RPM_PM8921_L18] = { 167, 81, 55, 2 },
+ [QCOM_RPM_PM8921_L19] = { 169, 83, 56, 2 },
+ [QCOM_RPM_PM8921_L20] = { 171, 85, 57, 2 },
+ [QCOM_RPM_PM8921_L21] = { 173, 87, 58, 2 },
+ [QCOM_RPM_PM8921_L22] = { 175, 89, 59, 2 },
+ [QCOM_RPM_PM8921_L23] = { 177, 91, 60, 2 },
+ [QCOM_RPM_PM8921_L24] = { 179, 93, 61, 2 },
+ [QCOM_RPM_PM8921_L25] = { 181, 95, 62, 2 },
+ [QCOM_RPM_PM8921_L26] = { 183, 97, 63, 2 },
+ [QCOM_RPM_PM8921_L27] = { 185, 99, 64, 2 },
+ [QCOM_RPM_PM8921_L28] = { 187, 101, 65, 2 },
+ [QCOM_RPM_PM8921_L29] = { 189, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 191, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 193, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 195, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 196, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 197, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 198, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 199, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 200, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 201, 115, 75, 1 },
+ [QCOM_RPM_PM8921_NCP] = { 202, 116, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 204, 118, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 205, 119, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 206, 120, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 207, 121, 84, 2 },
+};
+
+static const struct qcom_rpm_data msm8960_template = {
+ .version = 3,
+ .resource_table = msm8960_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
+};
+
+static const struct of_device_id qcom_rpm_of_match[] = {
+ { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
+ { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
+ { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
+
+struct qcom_rpm *dev_get_qcom_rpm(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+EXPORT_SYMBOL(dev_get_qcom_rpm);
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count)
+{
+ const struct qcom_rpm_resource *res;
+ const struct qcom_rpm_data *data = rpm->data;
+ u32 sel_mask[RPM_SELECT_SIZE] = { 0 };
+ int left;
+ int ret = 0;
+ int i;
+
+ if (WARN_ON(resource < 0 || resource >= data->n_resources))
+ return -EINVAL;
+
+ res = &data->resource_table[resource];
+ if (WARN_ON(res->size != count))
+ return -EINVAL;
+
+ mutex_lock(&rpm->lock);
+
+ for (i = 0; i < res->size; i++)
+ writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
+
+ bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
+ for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
+ writel_relaxed(sel_mask[i],
+ RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
+ }
+
+ writel_relaxed(RPM_ACTIVE_STATE,
+ RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT));
+
+ reinit_completion(&rpm->ack);
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+
+ left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
+ if (!left)
+ ret = -ETIMEDOUT;
+ else if (rpm->ack_status & RPM_REJECTED)
+ ret = -EIO;
+
+ mutex_unlock(&rpm->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_rpm_write);
+
+static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+ u32 ack;
+ int i;
+
+ ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+ for (i = 0; i < RPM_SELECT_SIZE; i++)
+ writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i));
+ writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+
+ if (ack & RPM_NOTIFICATION) {
+ dev_warn(rpm->dev, "ignoring notification!\n");
+ } else {
+ rpm->ack_status = ack;
+ complete(&rpm->ack);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+ dev_err(rpm->dev, "RPM triggered fatal error\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)
+{
+ return IRQ_HANDLED;
+}
+
+static int qcom_rpm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device_node *syscon_np;
+ struct resource *res;
+ struct qcom_rpm *rpm;
+ u32 fw_version[3];
+ int irq_wakeup;
+ int irq_ack;
+ int irq_err;
+ int ret;
+
+ rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);
+ if (!rpm) {
+ dev_err(&pdev->dev, "Can't allocate qcom_rpm\n");
+ return -ENOMEM;
+ }
+ rpm->dev = &pdev->dev;
+ mutex_init(&rpm->lock);
+ init_completion(&rpm->ack);
+
+ irq_ack = platform_get_irq_byname(pdev, "ack");
+ if (irq_ack < 0) {
+ dev_err(&pdev->dev, "required ack interrupt missing\n");
+ return irq_ack;
+ }
+
+ irq_err = platform_get_irq_byname(pdev, "err");
+ if (irq_err < 0) {
+ dev_err(&pdev->dev, "required err interrupt missing\n");
+ return irq_err;
+ }
+
+ irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
+ if (irq_wakeup < 0) {
+ dev_err(&pdev->dev, "required wakeup interrupt missing\n");
+ return irq_wakeup;
+ }
+
+ match = of_match_device(qcom_rpm_of_match, &pdev->dev);
+ rpm->data = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
+ rpm->ctrl_regs = rpm->status_regs + 0x400;
+ rpm->req_regs = rpm->status_regs + 0x600;
+ if (IS_ERR(rpm->status_regs))
+ return PTR_ERR(rpm->status_regs);
+
+ syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0);
+ if (!syscon_np) {
+ dev_err(&pdev->dev, "no qcom,ipc node\n");
+ return -ENODEV;
+ }
+
+ rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(rpm->ipc_regmap))
+ return PTR_ERR(rpm->ipc_regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1,
+ &rpm->ipc_offset);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2,
+ &rpm->ipc_bit);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no bit in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ dev_set_drvdata(&pdev->dev, rpm);
+
+ fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
+ fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
+ fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
+ if (fw_version[0] != rpm->data->version) {
+ dev_err(&pdev->dev,
+ "RPM version %u.%u.%u incompatible with driver version %u",
+ fw_version[0],
+ fw_version[1],
+ fw_version[2],
+ rpm->data->version);
+ return -EFAULT;
+ }
+
+ dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
+ fw_version[1],
+ fw_version[2]);
+
+ writel(fw_version[0], RPM_CTRL_REG(rpm, 0));
+ writel(fw_version[1], RPM_CTRL_REG(rpm, 1));
+ writel(fw_version[2], RPM_CTRL_REG(rpm, 2));
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_ack,
+ qcom_rpm_ack_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
+ "qcom_rpm_ack",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request ack interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_ack, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_err,
+ qcom_rpm_err_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_err",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request err interrupt\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_wakeup,
+ qcom_rpm_wakeup_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_wakeup",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_wakeup, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
+
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+static int qcom_rpm_remove_child(struct device *dev, void *unused)
+{
+ platform_device_unregister(to_platform_device(dev));
+ return 0;
+}
+
+static int qcom_rpm_remove(struct platform_device *pdev)
+{
+ device_for_each_child(&pdev->dev, NULL, qcom_rpm_remove_child);
+ return 0;
+}
+
+static struct platform_driver qcom_rpm_driver = {
+ .probe = qcom_rpm_probe,
+ .remove = qcom_rpm_remove,
+ .driver = {
+ .name = "qcom_rpm",
+ .owner = THIS_MODULE,
+ .of_match_table = qcom_rpm_of_match,
+ },
+};
+
+static int __init qcom_rpm_init(void)
+{
+ return platform_driver_register(&qcom_rpm_driver);
+}
+arch_initcall(qcom_rpm_init);
+
+static void __exit qcom_rpm_exit(void)
+{
+ platform_driver_unregister(&qcom_rpm_driver);
+}
+module_exit(qcom_rpm_exit)
+
+MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/soc/qcom_rpm.h b/include/linux/soc/qcom_rpm.h
new file mode 100644
index 0000000..a52bc37
--- /dev/null
+++ b/include/linux/soc/qcom_rpm.h
@@ -0,0 +1,12 @@
+#ifndef __QCOM_RPM_H__
+#define __QCOM_RPM_H__
+
+#include <linux/types.h>
+
+struct device;
+struct qcom_rpm;
+
+struct qcom_rpm *dev_get_qcom_rpm(struct device *dev);
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count);
+
+#endif
--
1.8.2.2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v4 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
@ 2014-07-15 23:00 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
and 8064 based devices. The driver exposes resources that child drivers
can operate on; to implementing regulator, clock and bus frequency
drivers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/soc/qcom/Kconfig | 14 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_rpm.c | 596 +++++++++++++++++++++++++++++++++++++++++++
include/linux/soc/qcom_rpm.h | 12 +
4 files changed, 623 insertions(+)
create mode 100644 drivers/soc/qcom/qcom_rpm.c
create mode 100644 include/linux/soc/qcom_rpm.h
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 7bd2c94..a8c2a96 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -9,3 +9,17 @@ config QCOM_GSBI
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
+config QCOM_RPM
+ tristate "Qualcomm Resource Power Manager (RPM)"
+ depends on ARCH_QCOM && OF
+ help
+ If you say yes to this option, support will be included for the
+ Resource Power Manager system found in the Qualcomm 8660, 8960 and
+ 8064 based devices.
+
+ This is required to access many regulators, clocks and bus
+ frequencies controlled by the RPM on these devices.
+
+ Say M here if you want to include support for the Qualcomm RPM as a
+ module. This will build a module called "qcom_rpm".
+
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 4389012..e7706e8 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
+obj-$(CONFIG_QCOM_RPM) += qcom_rpm.o
diff --git a/drivers/soc/qcom/qcom_rpm.c b/drivers/soc/qcom/qcom_rpm.c
new file mode 100644
index 0000000..228665b
--- /dev/null
+++ b/drivers/soc/qcom/qcom_rpm.c
@@ -0,0 +1,596 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/soc/qcom_rpm.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/soc/qcom,rpm.h>
+
+struct qcom_rpm_resource {
+ unsigned target_id;
+ unsigned status_id;
+ unsigned select_id;
+ unsigned size;
+};
+
+struct qcom_rpm_data {
+ u32 version;
+ const struct qcom_rpm_resource *resource_table;
+ unsigned n_resources;
+};
+
+struct qcom_rpm {
+ struct device *dev;
+ struct regmap *ipc_regmap;
+ unsigned ipc_offset;
+ unsigned ipc_bit;
+
+ struct completion ack;
+ struct mutex lock;
+
+ void __iomem *status_regs;
+ void __iomem *ctrl_regs;
+ void __iomem *req_regs;
+
+ u32 ack_status;
+
+ const struct qcom_rpm_data *data;
+};
+
+#define RPM_STATUS_REG(rpm, i) ((rpm)->status_regs + (i) * 4)
+#define RPM_CTRL_REG(rpm, i) ((rpm)->ctrl_regs + (i) * 4)
+#define RPM_REQ_REG(rpm, i) ((rpm)->req_regs + (i) * 4)
+
+#define RPM_REQUEST_TIMEOUT (5 * HZ)
+
+#define RPM_REQUEST_CONTEXT 3
+#define RPM_REQ_SELECT 11
+#define RPM_ACK_CONTEXT 15
+#define RPM_ACK_SELECTOR 23
+#define RPM_SELECT_SIZE 7
+
+#define RPM_ACTIVE_STATE BIT(0)
+#define RPM_NOTIFICATION BIT(30)
+#define RPM_REJECTED BIT(31)
+
+#define RPM_SIGNAL BIT(2)
+
+static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 21 },
+ [QCOM_RPM_PM8921_S1] = { 116, 31, 30, 2 },
+ [QCOM_RPM_PM8921_S2] = { 118, 33, 31, 2 },
+ [QCOM_RPM_PM8921_S3] = { 120, 35, 32, 2 },
+ [QCOM_RPM_PM8921_S4] = { 122, 37, 33, 2 },
+ [QCOM_RPM_PM8921_S5] = { 124, 39, 34, 2 },
+ [QCOM_RPM_PM8921_S6] = { 126, 41, 35, 2 },
+ [QCOM_RPM_PM8921_S7] = { 128, 43, 36, 2 },
+ [QCOM_RPM_PM8921_S8] = { 130, 45, 37, 2 },
+ [QCOM_RPM_PM8921_L1] = { 132, 47, 38, 2 },
+ [QCOM_RPM_PM8921_L2] = { 134, 49, 39, 2 },
+ [QCOM_RPM_PM8921_L3] = { 136, 51, 40, 2 },
+ [QCOM_RPM_PM8921_L4] = { 138, 53, 41, 2 },
+ [QCOM_RPM_PM8921_L5] = { 140, 55, 42, 2 },
+ [QCOM_RPM_PM8921_L6] = { 142, 57, 43, 2 },
+ [QCOM_RPM_PM8921_L7] = { 144, 59, 44, 2 },
+ [QCOM_RPM_PM8921_L8] = { 146, 61, 45, 2 },
+ [QCOM_RPM_PM8921_L9] = { 148, 63, 46, 2 },
+ [QCOM_RPM_PM8921_L10] = { 150, 65, 47, 2 },
+ [QCOM_RPM_PM8921_L11] = { 152, 67, 48, 2 },
+ [QCOM_RPM_PM8921_L12] = { 154, 69, 49, 2 },
+ [QCOM_RPM_PM8921_L13] = { 156, 71, 50, 2 },
+ [QCOM_RPM_PM8921_L14] = { 158, 73, 51, 2 },
+ [QCOM_RPM_PM8921_L15] = { 160, 75, 52, 2 },
+ [QCOM_RPM_PM8921_L16] = { 162, 77, 53, 2 },
+ [QCOM_RPM_PM8921_L17] = { 164, 79, 54, 2 },
+ [QCOM_RPM_PM8921_L18] = { 166, 81, 55, 2 },
+ [QCOM_RPM_PM8921_L19] = { 168, 83, 56, 2 },
+ [QCOM_RPM_PM8921_L20] = { 170, 85, 57, 2 },
+ [QCOM_RPM_PM8921_L21] = { 172, 87, 58, 2 },
+ [QCOM_RPM_PM8921_L22] = { 174, 89, 59, 2 },
+ [QCOM_RPM_PM8921_L23] = { 176, 91, 60, 2 },
+ [QCOM_RPM_PM8921_L24] = { 178, 93, 61, 2 },
+ [QCOM_RPM_PM8921_L25] = { 180, 95, 62, 2 },
+ [QCOM_RPM_PM8921_L26] = { 182, 97, 63, 2 },
+ [QCOM_RPM_PM8921_L27] = { 184, 99, 64, 2 },
+ [QCOM_RPM_PM8921_L28] = { 186, 101, 65, 2 },
+ [QCOM_RPM_PM8921_L29] = { 188, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 190, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 192, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 194, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 195, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 196, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 197, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 198, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 199, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 200, 115, 75, 1 },
+ [QCOM_RPM_PM8821_S1] = { 201, 116, 76, 2 },
+ [QCOM_RPM_PM8821_S2] = { 203, 118, 77, 2 },
+ [QCOM_RPM_PM8821_L1] = { 205, 120, 78, 2 },
+ [QCOM_RPM_PM8921_NCP] = { 207, 122, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 209, 124, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
+ [QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
+};
+
+static const struct qcom_rpm_data apq8064_template = {
+ .version = 3,
+ .resource_table = apq8064_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 32, 12, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 33, 13, 6, 1 },
+ [QCOM_RPM_PLL_4] = { 34, 14, 7, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 35, 15, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 36, 16, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 37, 17, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 38, 18, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 39, 19, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 40, 20, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 41, 21, 14, 1 },
+ [QCOM_RPM_SMI_CLK] = { 42, 22, 15, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 43, 23, 16, 1 },
+ [QCOM_RPM_APPS_L2_CACHE_CTL] = { 44, 24, 17, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 45, 25, 18, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 47, 26, 19, 3 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 51, 28, 21, 6 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 63, 29, 22, 2 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 65, 30, 23, 3 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 69, 32, 25, 22 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 105, 33, 26, 2 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 107, 34, 27, 3 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 111, 36, 29, 23 },
+ [QCOM_RPM_PM8901_SMPS0] = { 134, 37, 30, 2 },
+ [QCOM_RPM_PM8901_SMPS1] = { 136, 39, 31, 2 },
+ [QCOM_RPM_PM8901_SMPS2] = { 138, 41, 32, 2 },
+ [QCOM_RPM_PM8901_SMPS3] = { 140, 43, 33, 2 },
+ [QCOM_RPM_PM8901_SMPS4] = { 142, 45, 34, 2 },
+ [QCOM_RPM_PM8901_LDO0] = { 144, 47, 35, 2 },
+ [QCOM_RPM_PM8901_LDO1] = { 146, 49, 36, 2 },
+ [QCOM_RPM_PM8901_LDO2] = { 148, 51, 37, 2 },
+ [QCOM_RPM_PM8901_LDO3] = { 150, 53, 38, 2 },
+ [QCOM_RPM_PM8901_LDO4] = { 152, 55, 39, 2 },
+ [QCOM_RPM_PM8901_LDO5] = { 154, 57, 40, 2 },
+ [QCOM_RPM_PM8901_LDO6] = { 156, 59, 41, 2 },
+ [QCOM_RPM_PM8901_LVS0] = { 158, 61, 42, 1 },
+ [QCOM_RPM_PM8901_LVS1] = { 159, 62, 43, 1 },
+ [QCOM_RPM_PM8901_LVS2] = { 160, 63, 44, 1 },
+ [QCOM_RPM_PM8901_LVS3] = { 161, 64, 45, 1 },
+ [QCOM_RPM_PM8901_MVS] = { 162, 65, 46, 1 },
+ [QCOM_RPM_PM8058_SMPS0] = { 163, 66, 47, 2 },
+ [QCOM_RPM_PM8058_SMPS1] = { 165, 68, 48, 2 },
+ [QCOM_RPM_PM8058_SMPS2] = { 167, 70, 49, 2 },
+ [QCOM_RPM_PM8058_SMPS3] = { 169, 72, 50, 2 },
+ [QCOM_RPM_PM8058_SMPS4] = { 171, 74, 51, 2 },
+ [QCOM_RPM_PM8058_LDO0] = { 173, 76, 52, 2 },
+ [QCOM_RPM_PM8058_LDO1] = { 175, 78, 53, 2 },
+ [QCOM_RPM_PM8058_LDO2] = { 177, 80, 54, 2 },
+ [QCOM_RPM_PM8058_LDO3] = { 179, 82, 55, 2 },
+ [QCOM_RPM_PM8058_LDO4] = { 181, 84, 56, 2 },
+ [QCOM_RPM_PM8058_LDO5] = { 183, 86, 57, 2 },
+ [QCOM_RPM_PM8058_LDO6] = { 185, 88, 58, 2 },
+ [QCOM_RPM_PM8058_LDO7] = { 187, 90, 59, 2 },
+ [QCOM_RPM_PM8058_LDO8] = { 189, 92, 60, 2 },
+ [QCOM_RPM_PM8058_LDO9] = { 191, 94, 61, 2 },
+ [QCOM_RPM_PM8058_LDO10] = { 193, 96, 62, 2 },
+ [QCOM_RPM_PM8058_LDO11] = { 195, 98, 63, 2 },
+ [QCOM_RPM_PM8058_LDO12] = { 197, 100, 64, 2 },
+ [QCOM_RPM_PM8058_LDO13] = { 199, 102, 65, 2 },
+ [QCOM_RPM_PM8058_LDO14] = { 201, 104, 66, 2 },
+ [QCOM_RPM_PM8058_LDO15] = { 203, 106, 67, 2 },
+ [QCOM_RPM_PM8058_LDO16] = { 205, 108, 68, 2 },
+ [QCOM_RPM_PM8058_LDO17] = { 207, 110, 69, 2 },
+ [QCOM_RPM_PM8058_LDO18] = { 209, 112, 70, 2 },
+ [QCOM_RPM_PM8058_LDO19] = { 211, 114, 71, 2 },
+ [QCOM_RPM_PM8058_LDO20] = { 213, 116, 72, 2 },
+ [QCOM_RPM_PM8058_LDO21] = { 215, 118, 73, 2 },
+ [QCOM_RPM_PM8058_LDO22] = { 217, 120, 74, 2 },
+ [QCOM_RPM_PM8058_LDO23] = { 219, 122, 75, 2 },
+ [QCOM_RPM_PM8058_LDO24] = { 221, 124, 76, 2 },
+ [QCOM_RPM_PM8058_LDO25] = { 223, 126, 77, 2 },
+ [QCOM_RPM_PM8058_LVS0] = { 225, 128, 78, 1 },
+ [QCOM_RPM_PM8058_LVS1] = { 226, 129, 79, 1 },
+ [QCOM_RPM_PM8058_NCP] = { 227, 130, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 229, 132, 81, 1 },
+};
+
+static const struct qcom_rpm_data msm8660_template = {
+ .version = -1,
+ .resource_table = msm8660_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 29 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 88, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 90, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 93, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 94, 30, 29, 23 },
+ [QCOM_RPM_PM8921_S1] = { 117, 31, 30, 2 },
+ [QCOM_RPM_PM8921_S2] = { 119, 33, 31, 2 },
+ [QCOM_RPM_PM8921_S3] = { 121, 35, 32, 2 },
+ [QCOM_RPM_PM8921_S4] = { 123, 37, 33, 2 },
+ [QCOM_RPM_PM8921_S5] = { 125, 39, 34, 2 },
+ [QCOM_RPM_PM8921_S6] = { 127, 41, 35, 2 },
+ [QCOM_RPM_PM8921_S7] = { 129, 43, 36, 2 },
+ [QCOM_RPM_PM8921_S8] = { 131, 45, 37, 2 },
+ [QCOM_RPM_PM8921_L1] = { 133, 47, 38, 2 },
+ [QCOM_RPM_PM8921_L2] = { 135, 49, 39, 2 },
+ [QCOM_RPM_PM8921_L3] = { 137, 51, 40, 2 },
+ [QCOM_RPM_PM8921_L4] = { 139, 53, 41, 2 },
+ [QCOM_RPM_PM8921_L5] = { 141, 55, 42, 2 },
+ [QCOM_RPM_PM8921_L6] = { 143, 57, 43, 2 },
+ [QCOM_RPM_PM8921_L7] = { 145, 59, 44, 2 },
+ [QCOM_RPM_PM8921_L8] = { 147, 61, 45, 2 },
+ [QCOM_RPM_PM8921_L9] = { 149, 63, 46, 2 },
+ [QCOM_RPM_PM8921_L10] = { 151, 65, 47, 2 },
+ [QCOM_RPM_PM8921_L11] = { 153, 67, 48, 2 },
+ [QCOM_RPM_PM8921_L12] = { 155, 69, 49, 2 },
+ [QCOM_RPM_PM8921_L13] = { 157, 71, 50, 2 },
+ [QCOM_RPM_PM8921_L14] = { 159, 73, 51, 2 },
+ [QCOM_RPM_PM8921_L15] = { 161, 75, 52, 2 },
+ [QCOM_RPM_PM8921_L16] = { 163, 77, 53, 2 },
+ [QCOM_RPM_PM8921_L17] = { 165, 79, 54, 2 },
+ [QCOM_RPM_PM8921_L18] = { 167, 81, 55, 2 },
+ [QCOM_RPM_PM8921_L19] = { 169, 83, 56, 2 },
+ [QCOM_RPM_PM8921_L20] = { 171, 85, 57, 2 },
+ [QCOM_RPM_PM8921_L21] = { 173, 87, 58, 2 },
+ [QCOM_RPM_PM8921_L22] = { 175, 89, 59, 2 },
+ [QCOM_RPM_PM8921_L23] = { 177, 91, 60, 2 },
+ [QCOM_RPM_PM8921_L24] = { 179, 93, 61, 2 },
+ [QCOM_RPM_PM8921_L25] = { 181, 95, 62, 2 },
+ [QCOM_RPM_PM8921_L26] = { 183, 97, 63, 2 },
+ [QCOM_RPM_PM8921_L27] = { 185, 99, 64, 2 },
+ [QCOM_RPM_PM8921_L28] = { 187, 101, 65, 2 },
+ [QCOM_RPM_PM8921_L29] = { 189, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 191, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 193, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 195, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 196, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 197, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 198, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 199, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 200, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 201, 115, 75, 1 },
+ [QCOM_RPM_PM8921_NCP] = { 202, 116, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 204, 118, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 205, 119, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 206, 120, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 207, 121, 84, 2 },
+};
+
+static const struct qcom_rpm_data msm8960_template = {
+ .version = 3,
+ .resource_table = msm8960_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
+};
+
+static const struct of_device_id qcom_rpm_of_match[] = {
+ { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
+ { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
+ { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
+
+struct qcom_rpm *dev_get_qcom_rpm(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+EXPORT_SYMBOL(dev_get_qcom_rpm);
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count)
+{
+ const struct qcom_rpm_resource *res;
+ const struct qcom_rpm_data *data = rpm->data;
+ u32 sel_mask[RPM_SELECT_SIZE] = { 0 };
+ int left;
+ int ret = 0;
+ int i;
+
+ if (WARN_ON(resource < 0 || resource >= data->n_resources))
+ return -EINVAL;
+
+ res = &data->resource_table[resource];
+ if (WARN_ON(res->size != count))
+ return -EINVAL;
+
+ mutex_lock(&rpm->lock);
+
+ for (i = 0; i < res->size; i++)
+ writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
+
+ bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
+ for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
+ writel_relaxed(sel_mask[i],
+ RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
+ }
+
+ writel_relaxed(RPM_ACTIVE_STATE,
+ RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT));
+
+ reinit_completion(&rpm->ack);
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+
+ left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
+ if (!left)
+ ret = -ETIMEDOUT;
+ else if (rpm->ack_status & RPM_REJECTED)
+ ret = -EIO;
+
+ mutex_unlock(&rpm->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_rpm_write);
+
+static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+ u32 ack;
+ int i;
+
+ ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+ for (i = 0; i < RPM_SELECT_SIZE; i++)
+ writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i));
+ writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+
+ if (ack & RPM_NOTIFICATION) {
+ dev_warn(rpm->dev, "ignoring notification!\n");
+ } else {
+ rpm->ack_status = ack;
+ complete(&rpm->ack);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+ dev_err(rpm->dev, "RPM triggered fatal error\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)
+{
+ return IRQ_HANDLED;
+}
+
+static int qcom_rpm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device_node *syscon_np;
+ struct resource *res;
+ struct qcom_rpm *rpm;
+ u32 fw_version[3];
+ int irq_wakeup;
+ int irq_ack;
+ int irq_err;
+ int ret;
+
+ rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);
+ if (!rpm) {
+ dev_err(&pdev->dev, "Can't allocate qcom_rpm\n");
+ return -ENOMEM;
+ }
+ rpm->dev = &pdev->dev;
+ mutex_init(&rpm->lock);
+ init_completion(&rpm->ack);
+
+ irq_ack = platform_get_irq_byname(pdev, "ack");
+ if (irq_ack < 0) {
+ dev_err(&pdev->dev, "required ack interrupt missing\n");
+ return irq_ack;
+ }
+
+ irq_err = platform_get_irq_byname(pdev, "err");
+ if (irq_err < 0) {
+ dev_err(&pdev->dev, "required err interrupt missing\n");
+ return irq_err;
+ }
+
+ irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
+ if (irq_wakeup < 0) {
+ dev_err(&pdev->dev, "required wakeup interrupt missing\n");
+ return irq_wakeup;
+ }
+
+ match = of_match_device(qcom_rpm_of_match, &pdev->dev);
+ rpm->data = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
+ rpm->ctrl_regs = rpm->status_regs + 0x400;
+ rpm->req_regs = rpm->status_regs + 0x600;
+ if (IS_ERR(rpm->status_regs))
+ return PTR_ERR(rpm->status_regs);
+
+ syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0);
+ if (!syscon_np) {
+ dev_err(&pdev->dev, "no qcom,ipc node\n");
+ return -ENODEV;
+ }
+
+ rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(rpm->ipc_regmap))
+ return PTR_ERR(rpm->ipc_regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1,
+ &rpm->ipc_offset);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2,
+ &rpm->ipc_bit);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no bit in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ dev_set_drvdata(&pdev->dev, rpm);
+
+ fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
+ fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
+ fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
+ if (fw_version[0] != rpm->data->version) {
+ dev_err(&pdev->dev,
+ "RPM version %u.%u.%u incompatible with driver version %u",
+ fw_version[0],
+ fw_version[1],
+ fw_version[2],
+ rpm->data->version);
+ return -EFAULT;
+ }
+
+ dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
+ fw_version[1],
+ fw_version[2]);
+
+ writel(fw_version[0], RPM_CTRL_REG(rpm, 0));
+ writel(fw_version[1], RPM_CTRL_REG(rpm, 1));
+ writel(fw_version[2], RPM_CTRL_REG(rpm, 2));
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_ack,
+ qcom_rpm_ack_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
+ "qcom_rpm_ack",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request ack interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_ack, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_err,
+ qcom_rpm_err_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_err",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request err interrupt\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_wakeup,
+ qcom_rpm_wakeup_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_wakeup",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_wakeup, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
+
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+static int qcom_rpm_remove_child(struct device *dev, void *unused)
+{
+ platform_device_unregister(to_platform_device(dev));
+ return 0;
+}
+
+static int qcom_rpm_remove(struct platform_device *pdev)
+{
+ device_for_each_child(&pdev->dev, NULL, qcom_rpm_remove_child);
+ return 0;
+}
+
+static struct platform_driver qcom_rpm_driver = {
+ .probe = qcom_rpm_probe,
+ .remove = qcom_rpm_remove,
+ .driver = {
+ .name = "qcom_rpm",
+ .owner = THIS_MODULE,
+ .of_match_table = qcom_rpm_of_match,
+ },
+};
+
+static int __init qcom_rpm_init(void)
+{
+ return platform_driver_register(&qcom_rpm_driver);
+}
+arch_initcall(qcom_rpm_init);
+
+static void __exit qcom_rpm_exit(void)
+{
+ platform_driver_unregister(&qcom_rpm_driver);
+}
+module_exit(qcom_rpm_exit)
+
+MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/soc/qcom_rpm.h b/include/linux/soc/qcom_rpm.h
new file mode 100644
index 0000000..a52bc37
--- /dev/null
+++ b/include/linux/soc/qcom_rpm.h
@@ -0,0 +1,12 @@
+#ifndef __QCOM_RPM_H__
+#define __QCOM_RPM_H__
+
+#include <linux/types.h>
+
+struct device;
+struct qcom_rpm;
+
+struct qcom_rpm *dev_get_qcom_rpm(struct device *dev);
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count);
+
+#endif
--
1.8.2.2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v4 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
@ 2014-07-15 23:00 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
To: linux-arm-kernel
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
and 8064 based devices. The driver exposes resources that child drivers
can operate on; to implementing regulator, clock and bus frequency
drivers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/soc/qcom/Kconfig | 14 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_rpm.c | 596 +++++++++++++++++++++++++++++++++++++++++++
include/linux/soc/qcom_rpm.h | 12 +
4 files changed, 623 insertions(+)
create mode 100644 drivers/soc/qcom/qcom_rpm.c
create mode 100644 include/linux/soc/qcom_rpm.h
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 7bd2c94..a8c2a96 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -9,3 +9,17 @@ config QCOM_GSBI
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
+config QCOM_RPM
+ tristate "Qualcomm Resource Power Manager (RPM)"
+ depends on ARCH_QCOM && OF
+ help
+ If you say yes to this option, support will be included for the
+ Resource Power Manager system found in the Qualcomm 8660, 8960 and
+ 8064 based devices.
+
+ This is required to access many regulators, clocks and bus
+ frequencies controlled by the RPM on these devices.
+
+ Say M here if you want to include support for the Qualcomm RPM as a
+ module. This will build a module called "qcom_rpm".
+
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 4389012..e7706e8 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
+obj-$(CONFIG_QCOM_RPM) += qcom_rpm.o
diff --git a/drivers/soc/qcom/qcom_rpm.c b/drivers/soc/qcom/qcom_rpm.c
new file mode 100644
index 0000000..228665b
--- /dev/null
+++ b/drivers/soc/qcom/qcom_rpm.c
@@ -0,0 +1,596 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/soc/qcom_rpm.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/soc/qcom,rpm.h>
+
+struct qcom_rpm_resource {
+ unsigned target_id;
+ unsigned status_id;
+ unsigned select_id;
+ unsigned size;
+};
+
+struct qcom_rpm_data {
+ u32 version;
+ const struct qcom_rpm_resource *resource_table;
+ unsigned n_resources;
+};
+
+struct qcom_rpm {
+ struct device *dev;
+ struct regmap *ipc_regmap;
+ unsigned ipc_offset;
+ unsigned ipc_bit;
+
+ struct completion ack;
+ struct mutex lock;
+
+ void __iomem *status_regs;
+ void __iomem *ctrl_regs;
+ void __iomem *req_regs;
+
+ u32 ack_status;
+
+ const struct qcom_rpm_data *data;
+};
+
+#define RPM_STATUS_REG(rpm, i) ((rpm)->status_regs + (i) * 4)
+#define RPM_CTRL_REG(rpm, i) ((rpm)->ctrl_regs + (i) * 4)
+#define RPM_REQ_REG(rpm, i) ((rpm)->req_regs + (i) * 4)
+
+#define RPM_REQUEST_TIMEOUT (5 * HZ)
+
+#define RPM_REQUEST_CONTEXT 3
+#define RPM_REQ_SELECT 11
+#define RPM_ACK_CONTEXT 15
+#define RPM_ACK_SELECTOR 23
+#define RPM_SELECT_SIZE 7
+
+#define RPM_ACTIVE_STATE BIT(0)
+#define RPM_NOTIFICATION BIT(30)
+#define RPM_REJECTED BIT(31)
+
+#define RPM_SIGNAL BIT(2)
+
+static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 21 },
+ [QCOM_RPM_PM8921_S1] = { 116, 31, 30, 2 },
+ [QCOM_RPM_PM8921_S2] = { 118, 33, 31, 2 },
+ [QCOM_RPM_PM8921_S3] = { 120, 35, 32, 2 },
+ [QCOM_RPM_PM8921_S4] = { 122, 37, 33, 2 },
+ [QCOM_RPM_PM8921_S5] = { 124, 39, 34, 2 },
+ [QCOM_RPM_PM8921_S6] = { 126, 41, 35, 2 },
+ [QCOM_RPM_PM8921_S7] = { 128, 43, 36, 2 },
+ [QCOM_RPM_PM8921_S8] = { 130, 45, 37, 2 },
+ [QCOM_RPM_PM8921_L1] = { 132, 47, 38, 2 },
+ [QCOM_RPM_PM8921_L2] = { 134, 49, 39, 2 },
+ [QCOM_RPM_PM8921_L3] = { 136, 51, 40, 2 },
+ [QCOM_RPM_PM8921_L4] = { 138, 53, 41, 2 },
+ [QCOM_RPM_PM8921_L5] = { 140, 55, 42, 2 },
+ [QCOM_RPM_PM8921_L6] = { 142, 57, 43, 2 },
+ [QCOM_RPM_PM8921_L7] = { 144, 59, 44, 2 },
+ [QCOM_RPM_PM8921_L8] = { 146, 61, 45, 2 },
+ [QCOM_RPM_PM8921_L9] = { 148, 63, 46, 2 },
+ [QCOM_RPM_PM8921_L10] = { 150, 65, 47, 2 },
+ [QCOM_RPM_PM8921_L11] = { 152, 67, 48, 2 },
+ [QCOM_RPM_PM8921_L12] = { 154, 69, 49, 2 },
+ [QCOM_RPM_PM8921_L13] = { 156, 71, 50, 2 },
+ [QCOM_RPM_PM8921_L14] = { 158, 73, 51, 2 },
+ [QCOM_RPM_PM8921_L15] = { 160, 75, 52, 2 },
+ [QCOM_RPM_PM8921_L16] = { 162, 77, 53, 2 },
+ [QCOM_RPM_PM8921_L17] = { 164, 79, 54, 2 },
+ [QCOM_RPM_PM8921_L18] = { 166, 81, 55, 2 },
+ [QCOM_RPM_PM8921_L19] = { 168, 83, 56, 2 },
+ [QCOM_RPM_PM8921_L20] = { 170, 85, 57, 2 },
+ [QCOM_RPM_PM8921_L21] = { 172, 87, 58, 2 },
+ [QCOM_RPM_PM8921_L22] = { 174, 89, 59, 2 },
+ [QCOM_RPM_PM8921_L23] = { 176, 91, 60, 2 },
+ [QCOM_RPM_PM8921_L24] = { 178, 93, 61, 2 },
+ [QCOM_RPM_PM8921_L25] = { 180, 95, 62, 2 },
+ [QCOM_RPM_PM8921_L26] = { 182, 97, 63, 2 },
+ [QCOM_RPM_PM8921_L27] = { 184, 99, 64, 2 },
+ [QCOM_RPM_PM8921_L28] = { 186, 101, 65, 2 },
+ [QCOM_RPM_PM8921_L29] = { 188, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 190, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 192, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 194, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 195, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 196, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 197, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 198, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 199, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 200, 115, 75, 1 },
+ [QCOM_RPM_PM8821_S1] = { 201, 116, 76, 2 },
+ [QCOM_RPM_PM8821_S2] = { 203, 118, 77, 2 },
+ [QCOM_RPM_PM8821_L1] = { 205, 120, 78, 2 },
+ [QCOM_RPM_PM8921_NCP] = { 207, 122, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 209, 124, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 },
+ [QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 },
+};
+
+static const struct qcom_rpm_data apq8064_template = {
+ .version = 3,
+ .resource_table = apq8064_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 32, 12, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 33, 13, 6, 1 },
+ [QCOM_RPM_PLL_4] = { 34, 14, 7, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 35, 15, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 36, 16, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 37, 17, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 38, 18, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 39, 19, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 40, 20, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 41, 21, 14, 1 },
+ [QCOM_RPM_SMI_CLK] = { 42, 22, 15, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 43, 23, 16, 1 },
+ [QCOM_RPM_APPS_L2_CACHE_CTL] = { 44, 24, 17, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 45, 25, 18, 2 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 47, 26, 19, 3 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 51, 28, 21, 6 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 63, 29, 22, 2 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 65, 30, 23, 3 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 69, 32, 25, 22 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 105, 33, 26, 2 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 107, 34, 27, 3 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 111, 36, 29, 23 },
+ [QCOM_RPM_PM8901_SMPS0] = { 134, 37, 30, 2 },
+ [QCOM_RPM_PM8901_SMPS1] = { 136, 39, 31, 2 },
+ [QCOM_RPM_PM8901_SMPS2] = { 138, 41, 32, 2 },
+ [QCOM_RPM_PM8901_SMPS3] = { 140, 43, 33, 2 },
+ [QCOM_RPM_PM8901_SMPS4] = { 142, 45, 34, 2 },
+ [QCOM_RPM_PM8901_LDO0] = { 144, 47, 35, 2 },
+ [QCOM_RPM_PM8901_LDO1] = { 146, 49, 36, 2 },
+ [QCOM_RPM_PM8901_LDO2] = { 148, 51, 37, 2 },
+ [QCOM_RPM_PM8901_LDO3] = { 150, 53, 38, 2 },
+ [QCOM_RPM_PM8901_LDO4] = { 152, 55, 39, 2 },
+ [QCOM_RPM_PM8901_LDO5] = { 154, 57, 40, 2 },
+ [QCOM_RPM_PM8901_LDO6] = { 156, 59, 41, 2 },
+ [QCOM_RPM_PM8901_LVS0] = { 158, 61, 42, 1 },
+ [QCOM_RPM_PM8901_LVS1] = { 159, 62, 43, 1 },
+ [QCOM_RPM_PM8901_LVS2] = { 160, 63, 44, 1 },
+ [QCOM_RPM_PM8901_LVS3] = { 161, 64, 45, 1 },
+ [QCOM_RPM_PM8901_MVS] = { 162, 65, 46, 1 },
+ [QCOM_RPM_PM8058_SMPS0] = { 163, 66, 47, 2 },
+ [QCOM_RPM_PM8058_SMPS1] = { 165, 68, 48, 2 },
+ [QCOM_RPM_PM8058_SMPS2] = { 167, 70, 49, 2 },
+ [QCOM_RPM_PM8058_SMPS3] = { 169, 72, 50, 2 },
+ [QCOM_RPM_PM8058_SMPS4] = { 171, 74, 51, 2 },
+ [QCOM_RPM_PM8058_LDO0] = { 173, 76, 52, 2 },
+ [QCOM_RPM_PM8058_LDO1] = { 175, 78, 53, 2 },
+ [QCOM_RPM_PM8058_LDO2] = { 177, 80, 54, 2 },
+ [QCOM_RPM_PM8058_LDO3] = { 179, 82, 55, 2 },
+ [QCOM_RPM_PM8058_LDO4] = { 181, 84, 56, 2 },
+ [QCOM_RPM_PM8058_LDO5] = { 183, 86, 57, 2 },
+ [QCOM_RPM_PM8058_LDO6] = { 185, 88, 58, 2 },
+ [QCOM_RPM_PM8058_LDO7] = { 187, 90, 59, 2 },
+ [QCOM_RPM_PM8058_LDO8] = { 189, 92, 60, 2 },
+ [QCOM_RPM_PM8058_LDO9] = { 191, 94, 61, 2 },
+ [QCOM_RPM_PM8058_LDO10] = { 193, 96, 62, 2 },
+ [QCOM_RPM_PM8058_LDO11] = { 195, 98, 63, 2 },
+ [QCOM_RPM_PM8058_LDO12] = { 197, 100, 64, 2 },
+ [QCOM_RPM_PM8058_LDO13] = { 199, 102, 65, 2 },
+ [QCOM_RPM_PM8058_LDO14] = { 201, 104, 66, 2 },
+ [QCOM_RPM_PM8058_LDO15] = { 203, 106, 67, 2 },
+ [QCOM_RPM_PM8058_LDO16] = { 205, 108, 68, 2 },
+ [QCOM_RPM_PM8058_LDO17] = { 207, 110, 69, 2 },
+ [QCOM_RPM_PM8058_LDO18] = { 209, 112, 70, 2 },
+ [QCOM_RPM_PM8058_LDO19] = { 211, 114, 71, 2 },
+ [QCOM_RPM_PM8058_LDO20] = { 213, 116, 72, 2 },
+ [QCOM_RPM_PM8058_LDO21] = { 215, 118, 73, 2 },
+ [QCOM_RPM_PM8058_LDO22] = { 217, 120, 74, 2 },
+ [QCOM_RPM_PM8058_LDO23] = { 219, 122, 75, 2 },
+ [QCOM_RPM_PM8058_LDO24] = { 221, 124, 76, 2 },
+ [QCOM_RPM_PM8058_LDO25] = { 223, 126, 77, 2 },
+ [QCOM_RPM_PM8058_LVS0] = { 225, 128, 78, 1 },
+ [QCOM_RPM_PM8058_LVS1] = { 226, 129, 79, 1 },
+ [QCOM_RPM_PM8058_NCP] = { 227, 130, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 229, 132, 81, 1 },
+};
+
+static const struct qcom_rpm_data msm8660_template = {
+ .version = -1,
+ .resource_table = msm8660_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
+};
+
+static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
+ [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 },
+ [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 },
+ [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 },
+ [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 },
+ [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 },
+ [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 },
+ [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 },
+ [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 },
+ [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 },
+ [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 },
+ [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 },
+ [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 },
+ [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 },
+ [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 },
+ [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 },
+ [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 },
+ [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 },
+ [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 29 },
+ [QCOM_RPM_MM_FABRIC_HALT] = { 88, 27, 26, 1 },
+ [QCOM_RPM_MM_FABRIC_MODE] = { 90, 28, 27, 1 },
+ [QCOM_RPM_MM_FABRIC_IOCTL] = { 93, 29, 28, 1 },
+ [QCOM_RPM_MM_FABRIC_ARB] = { 94, 30, 29, 23 },
+ [QCOM_RPM_PM8921_S1] = { 117, 31, 30, 2 },
+ [QCOM_RPM_PM8921_S2] = { 119, 33, 31, 2 },
+ [QCOM_RPM_PM8921_S3] = { 121, 35, 32, 2 },
+ [QCOM_RPM_PM8921_S4] = { 123, 37, 33, 2 },
+ [QCOM_RPM_PM8921_S5] = { 125, 39, 34, 2 },
+ [QCOM_RPM_PM8921_S6] = { 127, 41, 35, 2 },
+ [QCOM_RPM_PM8921_S7] = { 129, 43, 36, 2 },
+ [QCOM_RPM_PM8921_S8] = { 131, 45, 37, 2 },
+ [QCOM_RPM_PM8921_L1] = { 133, 47, 38, 2 },
+ [QCOM_RPM_PM8921_L2] = { 135, 49, 39, 2 },
+ [QCOM_RPM_PM8921_L3] = { 137, 51, 40, 2 },
+ [QCOM_RPM_PM8921_L4] = { 139, 53, 41, 2 },
+ [QCOM_RPM_PM8921_L5] = { 141, 55, 42, 2 },
+ [QCOM_RPM_PM8921_L6] = { 143, 57, 43, 2 },
+ [QCOM_RPM_PM8921_L7] = { 145, 59, 44, 2 },
+ [QCOM_RPM_PM8921_L8] = { 147, 61, 45, 2 },
+ [QCOM_RPM_PM8921_L9] = { 149, 63, 46, 2 },
+ [QCOM_RPM_PM8921_L10] = { 151, 65, 47, 2 },
+ [QCOM_RPM_PM8921_L11] = { 153, 67, 48, 2 },
+ [QCOM_RPM_PM8921_L12] = { 155, 69, 49, 2 },
+ [QCOM_RPM_PM8921_L13] = { 157, 71, 50, 2 },
+ [QCOM_RPM_PM8921_L14] = { 159, 73, 51, 2 },
+ [QCOM_RPM_PM8921_L15] = { 161, 75, 52, 2 },
+ [QCOM_RPM_PM8921_L16] = { 163, 77, 53, 2 },
+ [QCOM_RPM_PM8921_L17] = { 165, 79, 54, 2 },
+ [QCOM_RPM_PM8921_L18] = { 167, 81, 55, 2 },
+ [QCOM_RPM_PM8921_L19] = { 169, 83, 56, 2 },
+ [QCOM_RPM_PM8921_L20] = { 171, 85, 57, 2 },
+ [QCOM_RPM_PM8921_L21] = { 173, 87, 58, 2 },
+ [QCOM_RPM_PM8921_L22] = { 175, 89, 59, 2 },
+ [QCOM_RPM_PM8921_L23] = { 177, 91, 60, 2 },
+ [QCOM_RPM_PM8921_L24] = { 179, 93, 61, 2 },
+ [QCOM_RPM_PM8921_L25] = { 181, 95, 62, 2 },
+ [QCOM_RPM_PM8921_L26] = { 183, 97, 63, 2 },
+ [QCOM_RPM_PM8921_L27] = { 185, 99, 64, 2 },
+ [QCOM_RPM_PM8921_L28] = { 187, 101, 65, 2 },
+ [QCOM_RPM_PM8921_L29] = { 189, 103, 66, 2 },
+ [QCOM_RPM_PM8921_CLK1] = { 191, 105, 67, 2 },
+ [QCOM_RPM_PM8921_CLK2] = { 193, 107, 68, 2 },
+ [QCOM_RPM_PM8921_LVS1] = { 195, 109, 69, 1 },
+ [QCOM_RPM_PM8921_LVS2] = { 196, 110, 70, 1 },
+ [QCOM_RPM_PM8921_LVS3] = { 197, 111, 71, 1 },
+ [QCOM_RPM_PM8921_LVS4] = { 198, 112, 72, 1 },
+ [QCOM_RPM_PM8921_LVS5] = { 199, 113, 73, 1 },
+ [QCOM_RPM_PM8921_LVS6] = { 200, 114, 74, 1 },
+ [QCOM_RPM_PM8921_LVS7] = { 201, 115, 75, 1 },
+ [QCOM_RPM_PM8921_NCP] = { 202, 116, 80, 2 },
+ [QCOM_RPM_CXO_BUFFERS] = { 204, 118, 81, 1 },
+ [QCOM_RPM_USB_OTG_SWITCH] = { 205, 119, 82, 1 },
+ [QCOM_RPM_HDMI_SWITCH] = { 206, 120, 83, 1 },
+ [QCOM_RPM_DDR_DMM] = { 207, 121, 84, 2 },
+};
+
+static const struct qcom_rpm_data msm8960_template = {
+ .version = 3,
+ .resource_table = msm8960_rpm_resource_table,
+ .n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
+};
+
+static const struct of_device_id qcom_rpm_of_match[] = {
+ { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
+ { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
+ { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
+
+struct qcom_rpm *dev_get_qcom_rpm(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+EXPORT_SYMBOL(dev_get_qcom_rpm);
+
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count)
+{
+ const struct qcom_rpm_resource *res;
+ const struct qcom_rpm_data *data = rpm->data;
+ u32 sel_mask[RPM_SELECT_SIZE] = { 0 };
+ int left;
+ int ret = 0;
+ int i;
+
+ if (WARN_ON(resource < 0 || resource >= data->n_resources))
+ return -EINVAL;
+
+ res = &data->resource_table[resource];
+ if (WARN_ON(res->size != count))
+ return -EINVAL;
+
+ mutex_lock(&rpm->lock);
+
+ for (i = 0; i < res->size; i++)
+ writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
+
+ bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
+ for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
+ writel_relaxed(sel_mask[i],
+ RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
+ }
+
+ writel_relaxed(RPM_ACTIVE_STATE,
+ RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT));
+
+ reinit_completion(&rpm->ack);
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+
+ left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
+ if (!left)
+ ret = -ETIMEDOUT;
+ else if (rpm->ack_status & RPM_REJECTED)
+ ret = -EIO;
+
+ mutex_unlock(&rpm->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_rpm_write);
+
+static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+ u32 ack;
+ int i;
+
+ ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+ for (i = 0; i < RPM_SELECT_SIZE; i++)
+ writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i));
+ writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
+
+ if (ack & RPM_NOTIFICATION) {
+ dev_warn(rpm->dev, "ignoring notification!\n");
+ } else {
+ rpm->ack_status = ack;
+ complete(&rpm->ack);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev)
+{
+ struct qcom_rpm *rpm = dev;
+
+ regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit));
+ dev_err(rpm->dev, "RPM triggered fatal error\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)
+{
+ return IRQ_HANDLED;
+}
+
+static int qcom_rpm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device_node *syscon_np;
+ struct resource *res;
+ struct qcom_rpm *rpm;
+ u32 fw_version[3];
+ int irq_wakeup;
+ int irq_ack;
+ int irq_err;
+ int ret;
+
+ rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);
+ if (!rpm) {
+ dev_err(&pdev->dev, "Can't allocate qcom_rpm\n");
+ return -ENOMEM;
+ }
+ rpm->dev = &pdev->dev;
+ mutex_init(&rpm->lock);
+ init_completion(&rpm->ack);
+
+ irq_ack = platform_get_irq_byname(pdev, "ack");
+ if (irq_ack < 0) {
+ dev_err(&pdev->dev, "required ack interrupt missing\n");
+ return irq_ack;
+ }
+
+ irq_err = platform_get_irq_byname(pdev, "err");
+ if (irq_err < 0) {
+ dev_err(&pdev->dev, "required err interrupt missing\n");
+ return irq_err;
+ }
+
+ irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
+ if (irq_wakeup < 0) {
+ dev_err(&pdev->dev, "required wakeup interrupt missing\n");
+ return irq_wakeup;
+ }
+
+ match = of_match_device(qcom_rpm_of_match, &pdev->dev);
+ rpm->data = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
+ rpm->ctrl_regs = rpm->status_regs + 0x400;
+ rpm->req_regs = rpm->status_regs + 0x600;
+ if (IS_ERR(rpm->status_regs))
+ return PTR_ERR(rpm->status_regs);
+
+ syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0);
+ if (!syscon_np) {
+ dev_err(&pdev->dev, "no qcom,ipc node\n");
+ return -ENODEV;
+ }
+
+ rpm->ipc_regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(rpm->ipc_regmap))
+ return PTR_ERR(rpm->ipc_regmap);
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1,
+ &rpm->ipc_offset);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no offset in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2,
+ &rpm->ipc_bit);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no bit in qcom,ipc\n");
+ return -EINVAL;
+ }
+
+ dev_set_drvdata(&pdev->dev, rpm);
+
+ fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
+ fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
+ fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
+ if (fw_version[0] != rpm->data->version) {
+ dev_err(&pdev->dev,
+ "RPM version %u.%u.%u incompatible with driver version %u",
+ fw_version[0],
+ fw_version[1],
+ fw_version[2],
+ rpm->data->version);
+ return -EFAULT;
+ }
+
+ dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
+ fw_version[1],
+ fw_version[2]);
+
+ writel(fw_version[0], RPM_CTRL_REG(rpm, 0));
+ writel(fw_version[1], RPM_CTRL_REG(rpm, 1));
+ writel(fw_version[2], RPM_CTRL_REG(rpm, 2));
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_ack,
+ qcom_rpm_ack_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
+ "qcom_rpm_ack",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request ack interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_ack, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_err,
+ qcom_rpm_err_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_err",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request err interrupt\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev,
+ irq_wakeup,
+ qcom_rpm_wakeup_interrupt,
+ IRQF_TRIGGER_RISING,
+ "qcom_rpm_wakeup",
+ rpm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
+ return ret;
+ }
+
+ ret = irq_set_irq_wake(irq_wakeup, 1);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
+
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+static int qcom_rpm_remove_child(struct device *dev, void *unused)
+{
+ platform_device_unregister(to_platform_device(dev));
+ return 0;
+}
+
+static int qcom_rpm_remove(struct platform_device *pdev)
+{
+ device_for_each_child(&pdev->dev, NULL, qcom_rpm_remove_child);
+ return 0;
+}
+
+static struct platform_driver qcom_rpm_driver = {
+ .probe = qcom_rpm_probe,
+ .remove = qcom_rpm_remove,
+ .driver = {
+ .name = "qcom_rpm",
+ .owner = THIS_MODULE,
+ .of_match_table = qcom_rpm_of_match,
+ },
+};
+
+static int __init qcom_rpm_init(void)
+{
+ return platform_driver_register(&qcom_rpm_driver);
+}
+arch_initcall(qcom_rpm_init);
+
+static void __exit qcom_rpm_exit(void)
+{
+ platform_driver_unregister(&qcom_rpm_driver);
+}
+module_exit(qcom_rpm_exit)
+
+MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/soc/qcom_rpm.h b/include/linux/soc/qcom_rpm.h
new file mode 100644
index 0000000..a52bc37
--- /dev/null
+++ b/include/linux/soc/qcom_rpm.h
@@ -0,0 +1,12 @@
+#ifndef __QCOM_RPM_H__
+#define __QCOM_RPM_H__
+
+#include <linux/types.h>
+
+struct device;
+struct qcom_rpm;
+
+struct qcom_rpm *dev_get_qcom_rpm(struct device *dev);
+int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count);
+
+#endif
--
1.8.2.2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
2014-07-15 23:00 ` Bjorn Andersson
(?)
@ 2014-07-15 23:00 ` Bjorn Andersson
-1 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
To: Mark Brown; +Cc: devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
Driver for regulators exposed by the Resource Power Manager (RPM) found
in Qualcomm 8660, 8960 and 8064 based devices.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 787 +++++++++++++++++++++++++++++++++
3 files changed, 800 insertions(+)
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 789eb46..cacce41 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -439,6 +439,18 @@ config REGULATOR_PFUZE100
Say y here to support the regulators found on the Freescale
PFUZE100/PFUZE200 PMIC.
+config REGULATOR_QCOM_RPM
+ tristate "Qualcomm RPM regulator driver"
+ depends on QCOM_RPM
+ help
+ If you say yes to this option, support will be included for the
+ regulators exposed by the Resource Power Manager found in Qualcomm
+ 8660, 8960 and 8064 based devices.
+
+ Say M here if you want to include support for the regulators on the
+ Qualcomm RPM as a module. The module will be named
+ "qcom_rpm-regulator".
+
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index d461110..6f57597 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
new file mode 100644
index 0000000..f28ccdb
--- /dev/null
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -0,0 +1,787 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/soc/qcom_rpm.h>
+
+#define MAX_REQUEST_LEN 2
+
+struct request_member {
+ int word;
+ unsigned int mask;
+ int shift;
+};
+
+struct rpm_reg_parts {
+ struct request_member mV; /* used if voltage is in mV */
+ struct request_member uV; /* used if voltage is in uV */
+ struct request_member ip; /* peak current in mA */
+ struct request_member pd; /* pull down enable */
+ struct request_member ia; /* average current in mA */
+ struct request_member fm; /* force mode */
+ struct request_member pm; /* power mode */
+ struct request_member pc; /* pin control */
+ struct request_member pf; /* pin function */
+ struct request_member enable_state; /* NCP and switch */
+ struct request_member comp_mode; /* NCP */
+ struct request_member freq; /* frequency: NCP and SMPS */
+ struct request_member freq_clk_src; /* clock source: SMPS */
+ struct request_member hpm; /* switch: control OCP and SS */
+ int request_len;
+};
+
+#define FORCE_MODE_IS_2_BITS(reg) \
+ ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 3)
+#define FORCE_MODE_IS_3_BITS(reg) \
+ ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 7)
+
+struct qcom_rpm_reg {
+ struct qcom_rpm *rpm;
+
+ struct mutex lock;
+ struct device *dev;
+ struct regulator_desc desc;
+ const struct rpm_reg_parts *parts;
+
+ int resource;
+ u32 val[MAX_REQUEST_LEN];
+
+ int uV;
+ int is_enabled;
+};
+
+static const struct rpm_reg_parts rpm8660_ldo_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+};
+
+static const struct rpm_reg_parts rpm8660_smps_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+ .freq = { 1, 0x001FE000, 13 },
+ .freq_clk_src = { 1, 0x00600000, 21 },
+};
+
+static const struct rpm_reg_parts rpm8660_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000000C0, 6 },
+ .hpm = { 0, 0x00000300, 8 },
+};
+
+static const struct rpm_reg_parts rpm8660_ncp_parts = {
+ .request_len = 1,
+ .mV = { 0, 0x00000FFF, 0 },
+ .enable_state = { 0, 0x00001000, 12 },
+ .comp_mode = { 0, 0x00002000, 13 },
+ .freq = { 0, 0x003FC000, 14 },
+};
+
+static const struct rpm_reg_parts rpm8960_ldo_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+};
+
+static const struct rpm_reg_parts rpm8960_smps_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+ .pm = { 1, 0x00800000, 23 },
+ .freq = { 1, 0x1F000000, 24 },
+ .freq_clk_src = { 1, 0x60000000, 29 },
+};
+
+static const struct rpm_reg_parts rpm8960_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000003C0, 6 },
+ .hpm = { 0, 0x00000C00, 10 },
+};
+
+static const struct rpm_reg_parts rpm8960_ncp_parts = {
+ .request_len = 1,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .enable_state = { 0, 0x00800000, 23 },
+ .comp_mode = { 0, 0x01000000, 24 },
+ .freq = { 0, 0x3E000000, 25 },
+};
+
+/*
+ * Physically available PMIC regulator voltage ranges
+ */
+static const struct regulator_linear_range pldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
+};
+
+static const struct regulator_linear_range nldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
+};
+
+static const struct regulator_linear_range nldo1200_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250),
+ REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500),
+};
+
+static const struct regulator_linear_range smps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
+ REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
+};
+
+static const struct regulator_linear_range ftsmps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000),
+ REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
+};
+
+static const struct regulator_linear_range ncp_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
+};
+
+static int rpm_reg_write(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (WARN_ON((value << req->shift) & ~req->mask))
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return qcom_rpm_write(vreg->rpm,
+ vreg->resource,
+ vreg->val,
+ vreg->parts->request_len);
+}
+
+static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_get_voltage(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->uV;
+}
+
+static int rpm_reg_mV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 1);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_mV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->is_enabled;
+}
+
+static struct regulator_ops uV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_uV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_uV_enable,
+ .disable = rpm_reg_uV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops mV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_mV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_mV_enable,
+ .disable = rpm_reg_mV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops switch_ops = {
+ .enable = rpm_reg_switch_enable,
+ .disable = rpm_reg_switch_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+/*
+ * PM8058 regulators
+ */
+static const struct qcom_rpm_reg pm8058_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8901 regulators
+ */
+static const struct qcom_rpm_reg pm8901_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8901_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8901_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8901_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8921 regulators
+ */
+static const struct qcom_rpm_reg pm8921_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo1200 = {
+ .desc.linear_ranges = nldo1200_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges),
+ .desc.n_voltages = 124,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8960_switch_parts,
+};
+
+static const struct of_device_id rpm_of_match[] = {
+ { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
+ { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
+ { .compatible = "qcom,rpm-pm8058-smps", .data = &pm8058_smps },
+ { .compatible = "qcom,rpm-pm8058-ncp", .data = &pm8058_ncp },
+ { .compatible = "qcom,rpm-pm8058-switch", .data = &pm8058_switch },
+
+ { .compatible = "qcom,rpm-pm8901-pldo", .data = &pm8901_pldo },
+ { .compatible = "qcom,rpm-pm8901-nldo", .data = &pm8901_nldo },
+ { .compatible = "qcom,rpm-pm8901-ftsmps", .data = &pm8901_ftsmps },
+ { .compatible = "qcom,rpm-pm8901-switch", .data = &pm8901_switch },
+
+ { .compatible = "qcom,rpm-pm8921-pldo", .data = &pm8921_pldo },
+ { .compatible = "qcom,rpm-pm8921-nldo", .data = &pm8921_nldo },
+ { .compatible = "qcom,rpm-pm8921-nldo1200", .data = &pm8921_nldo1200 },
+ { .compatible = "qcom,rpm-pm8921-smps", .data = &pm8921_smps },
+ { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
+ { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
+ { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rpm_of_match);
+
+static int rpm_reg_set(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (req->mask == 0 || (value << req->shift) & ~req->mask)
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return 0;
+}
+
+static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg)
+{
+ static const int freq_table[] = {
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000,
+ 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000,
+ 1280000, 1200000,
+
+ };
+ const char *key;
+ u32 freq;
+ int ret;
+ int i;
+
+ key = "qcom,switch-mode-frequency";
+ ret = of_property_read_u32(dev->of_node, key, &freq);
+ if (ret) {
+ dev_err(dev, "regulator requires %s property\n", key);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(freq_table); i++) {
+ if (freq == freq_table[i]) {
+ rpm_reg_set(vreg, &vreg->parts->freq, i + 1);
+ return 0;
+ }
+ }
+
+ dev_err(dev, "invalid frequency %d\n", freq);
+ return -EINVAL;
+}
+
+static int rpm_reg_of_select_one(struct device *dev,
+ const char * const keys[],
+ const int count, int def)
+{
+ int found = -1;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (!of_property_read_bool(dev->of_node, keys[i]))
+ continue;
+
+ if (found >= 0) {
+ dev_err(dev, "%s and %s are mutually exclusive\n",
+ keys[i], keys[found]);
+ return -EINVAL;
+ }
+ found = i;
+ }
+
+ if (found == -1)
+ return def;
+
+ return found;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *initdata;
+ const struct qcom_rpm_reg *template;
+ const struct of_device_id *match;
+ struct regulator_config config = { 0 };
+ struct regulator_dev *rdev;
+ struct qcom_rpm_reg *vreg;
+ const char *key;
+ u32 val;
+ int ret;
+
+ match = of_match_device(rpm_of_match, &pdev->dev);
+ template = match->data;
+
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ if (!initdata)
+ return -EINVAL;
+
+ vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ dev_err(&pdev->dev, "failed to allocate vreg\n");
+ return -ENOMEM;
+ }
+ memcpy(vreg, template, sizeof(*vreg));
+ mutex_init(&vreg->lock);
+ vreg->dev = &pdev->dev;
+ vreg->desc.id = -1;
+ vreg->desc.owner = THIS_MODULE;
+ vreg->desc.type = REGULATOR_VOLTAGE;
+ vreg->desc.name = pdev->dev.of_node->name;
+
+ vreg->rpm = dev_get_qcom_rpm(pdev->dev.parent);
+ if (!vreg->rpm) {
+ dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+ return -ENODEV;
+ }
+
+ key = "reg";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+ vreg->resource = val;
+
+ if ((vreg->parts->uV.mask || vreg->parts->mV.mask) &&
+ (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) {
+ dev_err(&pdev->dev, "no voltage specified for regulator\n");
+ return -EINVAL;
+ }
+
+ key = "bias-pull-down";
+ if (of_property_read_bool(pdev->dev.of_node, key)) {
+ ret = rpm_reg_set(vreg, &vreg->parts->pd, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "%s is invalid", key);
+ return ret;
+ }
+ }
+
+ if (vreg->parts->freq.mask) {
+ ret = rpm_reg_of_parse_freq(&pdev->dev, vreg);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vreg->parts->pm.mask) {
+ static const char * const keys[] = {
+ "qcom,power-mode-hysteretic",
+ "qcom,power-mode-pwm",
+ };
+
+ ret = rpm_reg_of_select_one(&pdev->dev,
+ keys, ARRAY_SIZE(keys), 1);
+ if (ret < 0)
+ return ret;
+
+ ret = rpm_reg_set(vreg, &vreg->parts->pm, ret);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set power mode\n");
+ return ret;
+ }
+ }
+
+ if (FORCE_MODE_IS_2_BITS(vreg)) {
+ static const char * const keys[] = {
+ "qcom,force-mode-none",
+ "qcom,force-mode-lpm",
+ "qcom,force-mode-hpm"
+ };
+
+ ret = rpm_reg_of_select_one(&pdev->dev,
+ keys, ARRAY_SIZE(keys), 0);
+ if (ret < 0)
+ return ret;
+
+ ret = rpm_reg_set(vreg, &vreg->parts->fm, ret);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set force mode\n");
+ return ret;
+ }
+ } else if (FORCE_MODE_IS_3_BITS(vreg)) {
+ static const char * const keys[] = {
+ "qcom,force-mode-none",
+ "qcom,force-mode-lpm",
+ "qcom,force-mode-auto",
+ "qcom,force-mode-hpm",
+ "qcom,force-mode-bypass",
+ };
+
+ ret = rpm_reg_of_select_one(&pdev->dev,
+ keys, ARRAY_SIZE(keys), 0);
+ if (ret < 0)
+ return ret;
+
+ ret = rpm_reg_set(vreg, &vreg->parts->fm, ret);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set force mode\n");
+ return ret;
+ }
+ }
+
+ config.dev = &pdev->dev;
+ config.init_data = initdata;
+ config.driver_data = vreg;
+ config.of_node = pdev->dev.of_node;
+ rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "can't register regulator\n");
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver rpm_reg_driver = {
+ .probe = rpm_reg_probe,
+ .driver = {
+ .name = "qcom_rpm_reg",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rpm_of_match),
+ },
+};
+
+static int __init rpm_reg_init(void)
+{
+ return platform_driver_register(&rpm_reg_driver);
+}
+subsys_initcall(rpm_reg_init);
+
+static void __exit rpm_reg_exit(void)
+{
+ platform_driver_unregister(&rpm_reg_driver);
+}
+module_exit(rpm_reg_exit)
+
+MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
+MODULE_LICENSE("GPL v2");
--
1.8.2.2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-15 23:00 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
To: Mark Brown; +Cc: devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
Driver for regulators exposed by the Resource Power Manager (RPM) found
in Qualcomm 8660, 8960 and 8064 based devices.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 787 +++++++++++++++++++++++++++++++++
3 files changed, 800 insertions(+)
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 789eb46..cacce41 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -439,6 +439,18 @@ config REGULATOR_PFUZE100
Say y here to support the regulators found on the Freescale
PFUZE100/PFUZE200 PMIC.
+config REGULATOR_QCOM_RPM
+ tristate "Qualcomm RPM regulator driver"
+ depends on QCOM_RPM
+ help
+ If you say yes to this option, support will be included for the
+ regulators exposed by the Resource Power Manager found in Qualcomm
+ 8660, 8960 and 8064 based devices.
+
+ Say M here if you want to include support for the regulators on the
+ Qualcomm RPM as a module. The module will be named
+ "qcom_rpm-regulator".
+
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index d461110..6f57597 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
new file mode 100644
index 0000000..f28ccdb
--- /dev/null
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -0,0 +1,787 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/soc/qcom_rpm.h>
+
+#define MAX_REQUEST_LEN 2
+
+struct request_member {
+ int word;
+ unsigned int mask;
+ int shift;
+};
+
+struct rpm_reg_parts {
+ struct request_member mV; /* used if voltage is in mV */
+ struct request_member uV; /* used if voltage is in uV */
+ struct request_member ip; /* peak current in mA */
+ struct request_member pd; /* pull down enable */
+ struct request_member ia; /* average current in mA */
+ struct request_member fm; /* force mode */
+ struct request_member pm; /* power mode */
+ struct request_member pc; /* pin control */
+ struct request_member pf; /* pin function */
+ struct request_member enable_state; /* NCP and switch */
+ struct request_member comp_mode; /* NCP */
+ struct request_member freq; /* frequency: NCP and SMPS */
+ struct request_member freq_clk_src; /* clock source: SMPS */
+ struct request_member hpm; /* switch: control OCP and SS */
+ int request_len;
+};
+
+#define FORCE_MODE_IS_2_BITS(reg) \
+ ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 3)
+#define FORCE_MODE_IS_3_BITS(reg) \
+ ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 7)
+
+struct qcom_rpm_reg {
+ struct qcom_rpm *rpm;
+
+ struct mutex lock;
+ struct device *dev;
+ struct regulator_desc desc;
+ const struct rpm_reg_parts *parts;
+
+ int resource;
+ u32 val[MAX_REQUEST_LEN];
+
+ int uV;
+ int is_enabled;
+};
+
+static const struct rpm_reg_parts rpm8660_ldo_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+};
+
+static const struct rpm_reg_parts rpm8660_smps_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+ .freq = { 1, 0x001FE000, 13 },
+ .freq_clk_src = { 1, 0x00600000, 21 },
+};
+
+static const struct rpm_reg_parts rpm8660_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000000C0, 6 },
+ .hpm = { 0, 0x00000300, 8 },
+};
+
+static const struct rpm_reg_parts rpm8660_ncp_parts = {
+ .request_len = 1,
+ .mV = { 0, 0x00000FFF, 0 },
+ .enable_state = { 0, 0x00001000, 12 },
+ .comp_mode = { 0, 0x00002000, 13 },
+ .freq = { 0, 0x003FC000, 14 },
+};
+
+static const struct rpm_reg_parts rpm8960_ldo_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+};
+
+static const struct rpm_reg_parts rpm8960_smps_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+ .pm = { 1, 0x00800000, 23 },
+ .freq = { 1, 0x1F000000, 24 },
+ .freq_clk_src = { 1, 0x60000000, 29 },
+};
+
+static const struct rpm_reg_parts rpm8960_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000003C0, 6 },
+ .hpm = { 0, 0x00000C00, 10 },
+};
+
+static const struct rpm_reg_parts rpm8960_ncp_parts = {
+ .request_len = 1,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .enable_state = { 0, 0x00800000, 23 },
+ .comp_mode = { 0, 0x01000000, 24 },
+ .freq = { 0, 0x3E000000, 25 },
+};
+
+/*
+ * Physically available PMIC regulator voltage ranges
+ */
+static const struct regulator_linear_range pldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
+};
+
+static const struct regulator_linear_range nldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
+};
+
+static const struct regulator_linear_range nldo1200_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250),
+ REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500),
+};
+
+static const struct regulator_linear_range smps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
+ REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
+};
+
+static const struct regulator_linear_range ftsmps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000),
+ REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
+};
+
+static const struct regulator_linear_range ncp_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
+};
+
+static int rpm_reg_write(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (WARN_ON((value << req->shift) & ~req->mask))
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return qcom_rpm_write(vreg->rpm,
+ vreg->resource,
+ vreg->val,
+ vreg->parts->request_len);
+}
+
+static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_get_voltage(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->uV;
+}
+
+static int rpm_reg_mV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 1);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_mV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->is_enabled;
+}
+
+static struct regulator_ops uV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_uV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_uV_enable,
+ .disable = rpm_reg_uV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops mV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_mV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_mV_enable,
+ .disable = rpm_reg_mV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops switch_ops = {
+ .enable = rpm_reg_switch_enable,
+ .disable = rpm_reg_switch_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+/*
+ * PM8058 regulators
+ */
+static const struct qcom_rpm_reg pm8058_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8901 regulators
+ */
+static const struct qcom_rpm_reg pm8901_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8901_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8901_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8901_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8921 regulators
+ */
+static const struct qcom_rpm_reg pm8921_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo1200 = {
+ .desc.linear_ranges = nldo1200_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges),
+ .desc.n_voltages = 124,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8960_switch_parts,
+};
+
+static const struct of_device_id rpm_of_match[] = {
+ { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
+ { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
+ { .compatible = "qcom,rpm-pm8058-smps", .data = &pm8058_smps },
+ { .compatible = "qcom,rpm-pm8058-ncp", .data = &pm8058_ncp },
+ { .compatible = "qcom,rpm-pm8058-switch", .data = &pm8058_switch },
+
+ { .compatible = "qcom,rpm-pm8901-pldo", .data = &pm8901_pldo },
+ { .compatible = "qcom,rpm-pm8901-nldo", .data = &pm8901_nldo },
+ { .compatible = "qcom,rpm-pm8901-ftsmps", .data = &pm8901_ftsmps },
+ { .compatible = "qcom,rpm-pm8901-switch", .data = &pm8901_switch },
+
+ { .compatible = "qcom,rpm-pm8921-pldo", .data = &pm8921_pldo },
+ { .compatible = "qcom,rpm-pm8921-nldo", .data = &pm8921_nldo },
+ { .compatible = "qcom,rpm-pm8921-nldo1200", .data = &pm8921_nldo1200 },
+ { .compatible = "qcom,rpm-pm8921-smps", .data = &pm8921_smps },
+ { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
+ { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
+ { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rpm_of_match);
+
+static int rpm_reg_set(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (req->mask == 0 || (value << req->shift) & ~req->mask)
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return 0;
+}
+
+static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg)
+{
+ static const int freq_table[] = {
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000,
+ 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000,
+ 1280000, 1200000,
+
+ };
+ const char *key;
+ u32 freq;
+ int ret;
+ int i;
+
+ key = "qcom,switch-mode-frequency";
+ ret = of_property_read_u32(dev->of_node, key, &freq);
+ if (ret) {
+ dev_err(dev, "regulator requires %s property\n", key);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(freq_table); i++) {
+ if (freq == freq_table[i]) {
+ rpm_reg_set(vreg, &vreg->parts->freq, i + 1);
+ return 0;
+ }
+ }
+
+ dev_err(dev, "invalid frequency %d\n", freq);
+ return -EINVAL;
+}
+
+static int rpm_reg_of_select_one(struct device *dev,
+ const char * const keys[],
+ const int count, int def)
+{
+ int found = -1;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (!of_property_read_bool(dev->of_node, keys[i]))
+ continue;
+
+ if (found >= 0) {
+ dev_err(dev, "%s and %s are mutually exclusive\n",
+ keys[i], keys[found]);
+ return -EINVAL;
+ }
+ found = i;
+ }
+
+ if (found == -1)
+ return def;
+
+ return found;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *initdata;
+ const struct qcom_rpm_reg *template;
+ const struct of_device_id *match;
+ struct regulator_config config = { 0 };
+ struct regulator_dev *rdev;
+ struct qcom_rpm_reg *vreg;
+ const char *key;
+ u32 val;
+ int ret;
+
+ match = of_match_device(rpm_of_match, &pdev->dev);
+ template = match->data;
+
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ if (!initdata)
+ return -EINVAL;
+
+ vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ dev_err(&pdev->dev, "failed to allocate vreg\n");
+ return -ENOMEM;
+ }
+ memcpy(vreg, template, sizeof(*vreg));
+ mutex_init(&vreg->lock);
+ vreg->dev = &pdev->dev;
+ vreg->desc.id = -1;
+ vreg->desc.owner = THIS_MODULE;
+ vreg->desc.type = REGULATOR_VOLTAGE;
+ vreg->desc.name = pdev->dev.of_node->name;
+
+ vreg->rpm = dev_get_qcom_rpm(pdev->dev.parent);
+ if (!vreg->rpm) {
+ dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+ return -ENODEV;
+ }
+
+ key = "reg";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+ vreg->resource = val;
+
+ if ((vreg->parts->uV.mask || vreg->parts->mV.mask) &&
+ (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) {
+ dev_err(&pdev->dev, "no voltage specified for regulator\n");
+ return -EINVAL;
+ }
+
+ key = "bias-pull-down";
+ if (of_property_read_bool(pdev->dev.of_node, key)) {
+ ret = rpm_reg_set(vreg, &vreg->parts->pd, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "%s is invalid", key);
+ return ret;
+ }
+ }
+
+ if (vreg->parts->freq.mask) {
+ ret = rpm_reg_of_parse_freq(&pdev->dev, vreg);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vreg->parts->pm.mask) {
+ static const char * const keys[] = {
+ "qcom,power-mode-hysteretic",
+ "qcom,power-mode-pwm",
+ };
+
+ ret = rpm_reg_of_select_one(&pdev->dev,
+ keys, ARRAY_SIZE(keys), 1);
+ if (ret < 0)
+ return ret;
+
+ ret = rpm_reg_set(vreg, &vreg->parts->pm, ret);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set power mode\n");
+ return ret;
+ }
+ }
+
+ if (FORCE_MODE_IS_2_BITS(vreg)) {
+ static const char * const keys[] = {
+ "qcom,force-mode-none",
+ "qcom,force-mode-lpm",
+ "qcom,force-mode-hpm"
+ };
+
+ ret = rpm_reg_of_select_one(&pdev->dev,
+ keys, ARRAY_SIZE(keys), 0);
+ if (ret < 0)
+ return ret;
+
+ ret = rpm_reg_set(vreg, &vreg->parts->fm, ret);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set force mode\n");
+ return ret;
+ }
+ } else if (FORCE_MODE_IS_3_BITS(vreg)) {
+ static const char * const keys[] = {
+ "qcom,force-mode-none",
+ "qcom,force-mode-lpm",
+ "qcom,force-mode-auto",
+ "qcom,force-mode-hpm",
+ "qcom,force-mode-bypass",
+ };
+
+ ret = rpm_reg_of_select_one(&pdev->dev,
+ keys, ARRAY_SIZE(keys), 0);
+ if (ret < 0)
+ return ret;
+
+ ret = rpm_reg_set(vreg, &vreg->parts->fm, ret);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set force mode\n");
+ return ret;
+ }
+ }
+
+ config.dev = &pdev->dev;
+ config.init_data = initdata;
+ config.driver_data = vreg;
+ config.of_node = pdev->dev.of_node;
+ rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "can't register regulator\n");
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver rpm_reg_driver = {
+ .probe = rpm_reg_probe,
+ .driver = {
+ .name = "qcom_rpm_reg",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rpm_of_match),
+ },
+};
+
+static int __init rpm_reg_init(void)
+{
+ return platform_driver_register(&rpm_reg_driver);
+}
+subsys_initcall(rpm_reg_init);
+
+static void __exit rpm_reg_exit(void)
+{
+ platform_driver_unregister(&rpm_reg_driver);
+}
+module_exit(rpm_reg_exit)
+
+MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
+MODULE_LICENSE("GPL v2");
--
1.8.2.2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-15 23:00 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-15 23:00 UTC (permalink / raw)
To: linux-arm-kernel
Driver for regulators exposed by the Resource Power Manager (RPM) found
in Qualcomm 8660, 8960 and 8064 based devices.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 787 +++++++++++++++++++++++++++++++++
3 files changed, 800 insertions(+)
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 789eb46..cacce41 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -439,6 +439,18 @@ config REGULATOR_PFUZE100
Say y here to support the regulators found on the Freescale
PFUZE100/PFUZE200 PMIC.
+config REGULATOR_QCOM_RPM
+ tristate "Qualcomm RPM regulator driver"
+ depends on QCOM_RPM
+ help
+ If you say yes to this option, support will be included for the
+ regulators exposed by the Resource Power Manager found in Qualcomm
+ 8660, 8960 and 8064 based devices.
+
+ Say M here if you want to include support for the regulators on the
+ Qualcomm RPM as a module. The module will be named
+ "qcom_rpm-regulator".
+
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index d461110..6f57597 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
new file mode 100644
index 0000000..f28ccdb
--- /dev/null
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -0,0 +1,787 @@
+/*
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/soc/qcom_rpm.h>
+
+#define MAX_REQUEST_LEN 2
+
+struct request_member {
+ int word;
+ unsigned int mask;
+ int shift;
+};
+
+struct rpm_reg_parts {
+ struct request_member mV; /* used if voltage is in mV */
+ struct request_member uV; /* used if voltage is in uV */
+ struct request_member ip; /* peak current in mA */
+ struct request_member pd; /* pull down enable */
+ struct request_member ia; /* average current in mA */
+ struct request_member fm; /* force mode */
+ struct request_member pm; /* power mode */
+ struct request_member pc; /* pin control */
+ struct request_member pf; /* pin function */
+ struct request_member enable_state; /* NCP and switch */
+ struct request_member comp_mode; /* NCP */
+ struct request_member freq; /* frequency: NCP and SMPS */
+ struct request_member freq_clk_src; /* clock source: SMPS */
+ struct request_member hpm; /* switch: control OCP and SS */
+ int request_len;
+};
+
+#define FORCE_MODE_IS_2_BITS(reg) \
+ ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 3)
+#define FORCE_MODE_IS_3_BITS(reg) \
+ ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 7)
+
+struct qcom_rpm_reg {
+ struct qcom_rpm *rpm;
+
+ struct mutex lock;
+ struct device *dev;
+ struct regulator_desc desc;
+ const struct rpm_reg_parts *parts;
+
+ int resource;
+ u32 val[MAX_REQUEST_LEN];
+
+ int uV;
+ int is_enabled;
+};
+
+static const struct rpm_reg_parts rpm8660_ldo_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+};
+
+static const struct rpm_reg_parts rpm8660_smps_parts = {
+ .request_len = 2,
+ .mV = { 0, 0x00000FFF, 0 },
+ .ip = { 0, 0x00FFF000, 12 },
+ .fm = { 0, 0x03000000, 24 },
+ .pc = { 0, 0x3C000000, 26 },
+ .pf = { 0, 0xC0000000, 30 },
+ .pd = { 1, 0x00000001, 0 },
+ .ia = { 1, 0x00001FFE, 1 },
+ .freq = { 1, 0x001FE000, 13 },
+ .freq_clk_src = { 1, 0x00600000, 21 },
+};
+
+static const struct rpm_reg_parts rpm8660_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000000C0, 6 },
+ .hpm = { 0, 0x00000300, 8 },
+};
+
+static const struct rpm_reg_parts rpm8660_ncp_parts = {
+ .request_len = 1,
+ .mV = { 0, 0x00000FFF, 0 },
+ .enable_state = { 0, 0x00001000, 12 },
+ .comp_mode = { 0, 0x00002000, 13 },
+ .freq = { 0, 0x003FC000, 14 },
+};
+
+static const struct rpm_reg_parts rpm8960_ldo_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+};
+
+static const struct rpm_reg_parts rpm8960_smps_parts = {
+ .request_len = 2,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .pd = { 0, 0x00800000, 23 },
+ .pc = { 0, 0x0F000000, 24 },
+ .pf = { 0, 0xF0000000, 28 },
+ .ip = { 1, 0x000003FF, 0 },
+ .ia = { 1, 0x000FFC00, 10 },
+ .fm = { 1, 0x00700000, 20 },
+ .pm = { 1, 0x00800000, 23 },
+ .freq = { 1, 0x1F000000, 24 },
+ .freq_clk_src = { 1, 0x60000000, 29 },
+};
+
+static const struct rpm_reg_parts rpm8960_switch_parts = {
+ .request_len = 1,
+ .enable_state = { 0, 0x00000001, 0 },
+ .pd = { 0, 0x00000002, 1 },
+ .pc = { 0, 0x0000003C, 2 },
+ .pf = { 0, 0x000003C0, 6 },
+ .hpm = { 0, 0x00000C00, 10 },
+};
+
+static const struct rpm_reg_parts rpm8960_ncp_parts = {
+ .request_len = 1,
+ .uV = { 0, 0x007FFFFF, 0 },
+ .enable_state = { 0, 0x00800000, 23 },
+ .comp_mode = { 0, 0x01000000, 24 },
+ .freq = { 0, 0x3E000000, 25 },
+};
+
+/*
+ * Physically available PMIC regulator voltage ranges
+ */
+static const struct regulator_linear_range pldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
+};
+
+static const struct regulator_linear_range nldo_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
+};
+
+static const struct regulator_linear_range nldo1200_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250),
+ REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500),
+};
+
+static const struct regulator_linear_range smps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
+ REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
+};
+
+static const struct regulator_linear_range ftsmps_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000),
+ REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
+};
+
+static const struct regulator_linear_range ncp_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
+};
+
+static int rpm_reg_write(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (WARN_ON((value << req->shift) & ~req->mask))
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return qcom_rpm_write(vreg->rpm,
+ vreg->resource,
+ vreg->val,
+ vreg->parts->request_len);
+}
+
+static int rpm_reg_set_mV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_set_uV_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret = 0;
+ int uV;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ uV = regulator_list_voltage_linear_range(rdev, selector);
+ if (uV < 0)
+ return uV;
+
+ mutex_lock(&vreg->lock);
+ vreg->uV = uV;
+ if (vreg->is_enabled)
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_get_voltage(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->uV;
+}
+
+static int rpm_reg_mV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV / 1000);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, vreg->uV);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_enable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 1);
+ if (!ret)
+ vreg->is_enabled = 1;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_mV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->mV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_uV_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->uV;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_switch_disable(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+ const struct rpm_reg_parts *parts = vreg->parts;
+ const struct request_member *req = &parts->enable_state;
+ int ret;
+
+ if (req->mask == 0)
+ return -EINVAL;
+
+ mutex_lock(&vreg->lock);
+ ret = rpm_reg_write(vreg, req, 0);
+ if (!ret)
+ vreg->is_enabled = 0;
+ mutex_unlock(&vreg->lock);
+
+ return ret;
+}
+
+static int rpm_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev);
+
+ return vreg->is_enabled;
+}
+
+static struct regulator_ops uV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_uV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_uV_enable,
+ .disable = rpm_reg_uV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops mV_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+
+ .set_voltage_sel = rpm_reg_set_mV_sel,
+ .get_voltage = rpm_reg_get_voltage,
+
+ .enable = rpm_reg_mV_enable,
+ .disable = rpm_reg_mV_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+static struct regulator_ops switch_ops = {
+ .enable = rpm_reg_switch_enable,
+ .disable = rpm_reg_switch_disable,
+ .is_enabled = rpm_reg_is_enabled,
+};
+
+/*
+ * PM8058 regulators
+ */
+static const struct qcom_rpm_reg pm8058_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8058_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8901 regulators
+ */
+static const struct qcom_rpm_reg pm8901_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8901_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8901_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &mV_ops,
+ .parts = &rpm8660_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8901_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8660_switch_parts,
+};
+
+/*
+ * PM8921 regulators
+ */
+static const struct qcom_rpm_reg pm8921_pldo = {
+ .desc.linear_ranges = pldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges),
+ .desc.n_voltages = 161,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo = {
+ .desc.linear_ranges = nldo_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges),
+ .desc.n_voltages = 64,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_nldo1200 = {
+ .desc.linear_ranges = nldo1200_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges),
+ .desc.n_voltages = 124,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ldo_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_smps = {
+ .desc.linear_ranges = smps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges),
+ .desc.n_voltages = 154,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_ftsmps = {
+ .desc.linear_ranges = ftsmps_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges),
+ .desc.n_voltages = 101,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_ncp = {
+ .desc.linear_ranges = ncp_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges),
+ .desc.n_voltages = 32,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_ncp_parts,
+};
+
+static const struct qcom_rpm_reg pm8921_switch = {
+ .desc.ops = &switch_ops,
+ .parts = &rpm8960_switch_parts,
+};
+
+static const struct of_device_id rpm_of_match[] = {
+ { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
+ { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
+ { .compatible = "qcom,rpm-pm8058-smps", .data = &pm8058_smps },
+ { .compatible = "qcom,rpm-pm8058-ncp", .data = &pm8058_ncp },
+ { .compatible = "qcom,rpm-pm8058-switch", .data = &pm8058_switch },
+
+ { .compatible = "qcom,rpm-pm8901-pldo", .data = &pm8901_pldo },
+ { .compatible = "qcom,rpm-pm8901-nldo", .data = &pm8901_nldo },
+ { .compatible = "qcom,rpm-pm8901-ftsmps", .data = &pm8901_ftsmps },
+ { .compatible = "qcom,rpm-pm8901-switch", .data = &pm8901_switch },
+
+ { .compatible = "qcom,rpm-pm8921-pldo", .data = &pm8921_pldo },
+ { .compatible = "qcom,rpm-pm8921-nldo", .data = &pm8921_nldo },
+ { .compatible = "qcom,rpm-pm8921-nldo1200", .data = &pm8921_nldo1200 },
+ { .compatible = "qcom,rpm-pm8921-smps", .data = &pm8921_smps },
+ { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
+ { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
+ { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rpm_of_match);
+
+static int rpm_reg_set(struct qcom_rpm_reg *vreg,
+ const struct request_member *req,
+ const int value)
+{
+ if (req->mask == 0 || (value << req->shift) & ~req->mask)
+ return -EINVAL;
+
+ vreg->val[req->word] &= ~req->mask;
+ vreg->val[req->word] |= value << req->shift;
+
+ return 0;
+}
+
+static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg)
+{
+ static const int freq_table[] = {
+ 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000,
+ 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000,
+ 1280000, 1200000,
+
+ };
+ const char *key;
+ u32 freq;
+ int ret;
+ int i;
+
+ key = "qcom,switch-mode-frequency";
+ ret = of_property_read_u32(dev->of_node, key, &freq);
+ if (ret) {
+ dev_err(dev, "regulator requires %s property\n", key);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(freq_table); i++) {
+ if (freq == freq_table[i]) {
+ rpm_reg_set(vreg, &vreg->parts->freq, i + 1);
+ return 0;
+ }
+ }
+
+ dev_err(dev, "invalid frequency %d\n", freq);
+ return -EINVAL;
+}
+
+static int rpm_reg_of_select_one(struct device *dev,
+ const char * const keys[],
+ const int count, int def)
+{
+ int found = -1;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (!of_property_read_bool(dev->of_node, keys[i]))
+ continue;
+
+ if (found >= 0) {
+ dev_err(dev, "%s and %s are mutually exclusive\n",
+ keys[i], keys[found]);
+ return -EINVAL;
+ }
+ found = i;
+ }
+
+ if (found == -1)
+ return def;
+
+ return found;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *initdata;
+ const struct qcom_rpm_reg *template;
+ const struct of_device_id *match;
+ struct regulator_config config = { 0 };
+ struct regulator_dev *rdev;
+ struct qcom_rpm_reg *vreg;
+ const char *key;
+ u32 val;
+ int ret;
+
+ match = of_match_device(rpm_of_match, &pdev->dev);
+ template = match->data;
+
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ if (!initdata)
+ return -EINVAL;
+
+ vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ dev_err(&pdev->dev, "failed to allocate vreg\n");
+ return -ENOMEM;
+ }
+ memcpy(vreg, template, sizeof(*vreg));
+ mutex_init(&vreg->lock);
+ vreg->dev = &pdev->dev;
+ vreg->desc.id = -1;
+ vreg->desc.owner = THIS_MODULE;
+ vreg->desc.type = REGULATOR_VOLTAGE;
+ vreg->desc.name = pdev->dev.of_node->name;
+
+ vreg->rpm = dev_get_qcom_rpm(pdev->dev.parent);
+ if (!vreg->rpm) {
+ dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+ return -ENODEV;
+ }
+
+ key = "reg";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+ vreg->resource = val;
+
+ if ((vreg->parts->uV.mask || vreg->parts->mV.mask) &&
+ (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) {
+ dev_err(&pdev->dev, "no voltage specified for regulator\n");
+ return -EINVAL;
+ }
+
+ key = "bias-pull-down";
+ if (of_property_read_bool(pdev->dev.of_node, key)) {
+ ret = rpm_reg_set(vreg, &vreg->parts->pd, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "%s is invalid", key);
+ return ret;
+ }
+ }
+
+ if (vreg->parts->freq.mask) {
+ ret = rpm_reg_of_parse_freq(&pdev->dev, vreg);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vreg->parts->pm.mask) {
+ static const char * const keys[] = {
+ "qcom,power-mode-hysteretic",
+ "qcom,power-mode-pwm",
+ };
+
+ ret = rpm_reg_of_select_one(&pdev->dev,
+ keys, ARRAY_SIZE(keys), 1);
+ if (ret < 0)
+ return ret;
+
+ ret = rpm_reg_set(vreg, &vreg->parts->pm, ret);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set power mode\n");
+ return ret;
+ }
+ }
+
+ if (FORCE_MODE_IS_2_BITS(vreg)) {
+ static const char * const keys[] = {
+ "qcom,force-mode-none",
+ "qcom,force-mode-lpm",
+ "qcom,force-mode-hpm"
+ };
+
+ ret = rpm_reg_of_select_one(&pdev->dev,
+ keys, ARRAY_SIZE(keys), 0);
+ if (ret < 0)
+ return ret;
+
+ ret = rpm_reg_set(vreg, &vreg->parts->fm, ret);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set force mode\n");
+ return ret;
+ }
+ } else if (FORCE_MODE_IS_3_BITS(vreg)) {
+ static const char * const keys[] = {
+ "qcom,force-mode-none",
+ "qcom,force-mode-lpm",
+ "qcom,force-mode-auto",
+ "qcom,force-mode-hpm",
+ "qcom,force-mode-bypass",
+ };
+
+ ret = rpm_reg_of_select_one(&pdev->dev,
+ keys, ARRAY_SIZE(keys), 0);
+ if (ret < 0)
+ return ret;
+
+ ret = rpm_reg_set(vreg, &vreg->parts->fm, ret);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set force mode\n");
+ return ret;
+ }
+ }
+
+ config.dev = &pdev->dev;
+ config.init_data = initdata;
+ config.driver_data = vreg;
+ config.of_node = pdev->dev.of_node;
+ rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "can't register regulator\n");
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver rpm_reg_driver = {
+ .probe = rpm_reg_probe,
+ .driver = {
+ .name = "qcom_rpm_reg",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rpm_of_match),
+ },
+};
+
+static int __init rpm_reg_init(void)
+{
+ return platform_driver_register(&rpm_reg_driver);
+}
+subsys_initcall(rpm_reg_init);
+
+static void __exit rpm_reg_exit(void)
+{
+ platform_driver_unregister(&rpm_reg_driver);
+}
+module_exit(rpm_reg_exit)
+
+MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
+MODULE_LICENSE("GPL v2");
--
1.8.2.2
^ permalink raw reply related [flat|nested] 43+ messages in thread
* Re: [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
2014-07-15 23:00 ` Bjorn Andersson
@ 2014-07-16 0:08 ` Mark Brown
-1 siblings, 0 replies; 43+ messages in thread
From: Mark Brown @ 2014-07-16 0:08 UTC (permalink / raw)
To: Bjorn Andersson; +Cc: devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
[-- Attachment #1: Type: text/plain, Size: 268 bytes --]
On Tue, Jul 15, 2014 at 04:00:41PM -0700, Bjorn Andersson wrote:
> Driver for regulators exposed by the Resource Power Manager (RPM) found
> in Qualcomm 8660, 8960 and 8064 based devices.
I have patch 3/3 here but no cover or other patches - what is the story
there?
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-16 0:08 ` Mark Brown
0 siblings, 0 replies; 43+ messages in thread
From: Mark Brown @ 2014-07-16 0:08 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 15, 2014 at 04:00:41PM -0700, Bjorn Andersson wrote:
> Driver for regulators exposed by the Resource Power Manager (RPM) found
> in Qualcomm 8660, 8960 and 8064 based devices.
I have patch 3/3 here but no cover or other patches - what is the story
there?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140716/506747ca/attachment.sig>
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
2014-07-15 23:00 ` Bjorn Andersson
@ 2014-07-16 7:01 ` pramod gurav
-1 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-16 7:01 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Mark Brown, devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
Hi Bjorn,
On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
<bjorn.andersson@sonymobile.com> wrote:
> Driver for regulators exposed by the Resource Power Manager (RPM) found
> in Qualcomm 8660, 8960 and 8064 based devices.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
> drivers/regulator/Kconfig | 12 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/qcom_rpm-regulator.c | 787 +++++++++++++++++++++++++++++++++
> 3 files changed, 800 insertions(+)
.
.
[snip]
.
.
> + * Physically available PMIC regulator voltage ranges
> + */
> +static const struct regulator_linear_range pldo_ranges[] = {
> + REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
ERROR: space prohibited after that open parenthesis '('
> + REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
> + REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
> +};
> +
> +static const struct regulator_linear_range nldo_ranges[] = {
> + REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
Ditto.
> +};
> +
> +static const struct regulator_linear_range nldo1200_ranges[] = {
> + REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250),
> + REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500),
Ditto
> +};
> +
> +static const struct regulator_linear_range smps_ranges[] = {
> + REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
> + REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
> + REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
> +};
> +
> +static const struct regulator_linear_range ftsmps_ranges[] = {
> + REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000),
> + REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500),
> + REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
> +};
Ditto
> +
> +static const struct regulator_linear_range ncp_ranges[] = {
> + REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
[snip]
> +MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.8.2.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Thanks and Regards
Pramod
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-16 7:01 ` pramod gurav
0 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-16 7:01 UTC (permalink / raw)
To: linux-arm-kernel
Hi Bjorn,
On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
<bjorn.andersson@sonymobile.com> wrote:
> Driver for regulators exposed by the Resource Power Manager (RPM) found
> in Qualcomm 8660, 8960 and 8064 based devices.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
> drivers/regulator/Kconfig | 12 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/qcom_rpm-regulator.c | 787 +++++++++++++++++++++++++++++++++
> 3 files changed, 800 insertions(+)
.
.
[snip]
.
.
> + * Physically available PMIC regulator voltage ranges
> + */
> +static const struct regulator_linear_range pldo_ranges[] = {
> + REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
ERROR: space prohibited after that open parenthesis '('
> + REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
> + REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
> +};
> +
> +static const struct regulator_linear_range nldo_ranges[] = {
> + REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
Ditto.
> +};
> +
> +static const struct regulator_linear_range nldo1200_ranges[] = {
> + REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250),
> + REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500),
Ditto
> +};
> +
> +static const struct regulator_linear_range smps_ranges[] = {
> + REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
> + REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
> + REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
> +};
> +
> +static const struct regulator_linear_range ftsmps_ranges[] = {
> + REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000),
> + REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500),
> + REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
> +};
Ditto
> +
> +static const struct regulator_linear_range ncp_ranges[] = {
> + REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
[snip]
> +MODULE_DESCRIPTION("Qualcomm RPM regulator driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.8.2.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Thanks and Regards
Pramod
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
2014-07-15 23:00 ` Bjorn Andersson
(?)
@ 2014-07-16 10:06 ` pramod gurav
-1 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-16 10:06 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Herring, Pawel Moll, Mark Rutland,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA
Hi Bjorn,
RPM breaks on IFC6410 without entry for 'qcom.ipc' node. Please find
my observations below.
On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
<bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org> wrote:
> Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> 8960 and 8064 based devices. The binding currently describes the rpm
> itself and the regulator subnodes.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
> ---
> .../devicetree/bindings/soc/qcom/qcom,rpm.txt | 263 +++++++++++++++++++++
> include/dt-bindings/soc/qcom,rpm.h | 142 +++++++++++
> 2 files changed, 405 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> create mode 100644 include/dt-bindings/soc/qcom,rpm.h
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> new file mode 100644
> index 0000000..ac98ffc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> @@ -0,0 +1,263 @@
> +Qualcomm Resource Power Manager (RPM)
> +
.
[snip]
.
> +- #size-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 0
> +
> +- qcom,ipc:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: three entries specifying:
> + - phandle to a syscon node representing the apcs registers
> + - u32 representing offset to the register within the syscon
> + - u32 representing the ipc bit within the register
Was testing your patch on IFC6410 and looks like its breaking because
this node support not being in IFC DTs. I was using the earlier
versions of these patches and things were working. Please let me know
the changes needed in IFC6410 DT for qcom,ipc.
> +
> +
> += SUBDEVICES
> +
.
[snip]
.
> + Definition: resource as defined in <dt-bindings/soc/qcom/qcom,rpm.h>
> +
> +
> += EXAMPLE
> +
> + #include <dt-bindings/soc/qcom,rpm.h>
> +
> + rpm@108000 {
> + compatible = "qcom,rpm-msm8960";
> + reg = <0x108000 0x1000>;
> + qcom,ipc = <&apcs 0x8 2>;
Tried adding this but there is no reference to 'apcs' registers itself
in any dts.
Without these changes rpm breaks hence not able to test SATA which needs rpm.
> +
> + interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
> + interrupt-names = "ack", "err", "wakeup";
> +
.
[snip]
.
> +
> +#endif
> --
> 1.8.2.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Thanks and Regards
Pramod
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-07-16 10:06 ` pramod gurav
0 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-16 10:06 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Herring, Pawel Moll, Mark Rutland, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
Hi Bjorn,
RPM breaks on IFC6410 without entry for 'qcom.ipc' node. Please find
my observations below.
On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
<bjorn.andersson@sonymobile.com> wrote:
> Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> 8960 and 8064 based devices. The binding currently describes the rpm
> itself and the regulator subnodes.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
> .../devicetree/bindings/soc/qcom/qcom,rpm.txt | 263 +++++++++++++++++++++
> include/dt-bindings/soc/qcom,rpm.h | 142 +++++++++++
> 2 files changed, 405 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> create mode 100644 include/dt-bindings/soc/qcom,rpm.h
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> new file mode 100644
> index 0000000..ac98ffc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> @@ -0,0 +1,263 @@
> +Qualcomm Resource Power Manager (RPM)
> +
.
[snip]
.
> +- #size-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 0
> +
> +- qcom,ipc:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: three entries specifying:
> + - phandle to a syscon node representing the apcs registers
> + - u32 representing offset to the register within the syscon
> + - u32 representing the ipc bit within the register
Was testing your patch on IFC6410 and looks like its breaking because
this node support not being in IFC DTs. I was using the earlier
versions of these patches and things were working. Please let me know
the changes needed in IFC6410 DT for qcom,ipc.
> +
> +
> += SUBDEVICES
> +
.
[snip]
.
> + Definition: resource as defined in <dt-bindings/soc/qcom/qcom,rpm.h>
> +
> +
> += EXAMPLE
> +
> + #include <dt-bindings/soc/qcom,rpm.h>
> +
> + rpm@108000 {
> + compatible = "qcom,rpm-msm8960";
> + reg = <0x108000 0x1000>;
> + qcom,ipc = <&apcs 0x8 2>;
Tried adding this but there is no reference to 'apcs' registers itself
in any dts.
Without these changes rpm breaks hence not able to test SATA which needs rpm.
> +
> + interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
> + interrupt-names = "ack", "err", "wakeup";
> +
.
[snip]
.
> +
> +#endif
> --
> 1.8.2.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Thanks and Regards
Pramod
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-07-16 10:06 ` pramod gurav
0 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-16 10:06 UTC (permalink / raw)
To: linux-arm-kernel
Hi Bjorn,
RPM breaks on IFC6410 without entry for 'qcom.ipc' node. Please find
my observations below.
On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
<bjorn.andersson@sonymobile.com> wrote:
> Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> 8960 and 8064 based devices. The binding currently describes the rpm
> itself and the regulator subnodes.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
> .../devicetree/bindings/soc/qcom/qcom,rpm.txt | 263 +++++++++++++++++++++
> include/dt-bindings/soc/qcom,rpm.h | 142 +++++++++++
> 2 files changed, 405 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> create mode 100644 include/dt-bindings/soc/qcom,rpm.h
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> new file mode 100644
> index 0000000..ac98ffc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> @@ -0,0 +1,263 @@
> +Qualcomm Resource Power Manager (RPM)
> +
.
[snip]
.
> +- #size-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 0
> +
> +- qcom,ipc:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: three entries specifying:
> + - phandle to a syscon node representing the apcs registers
> + - u32 representing offset to the register within the syscon
> + - u32 representing the ipc bit within the register
Was testing your patch on IFC6410 and looks like its breaking because
this node support not being in IFC DTs. I was using the earlier
versions of these patches and things were working. Please let me know
the changes needed in IFC6410 DT for qcom,ipc.
> +
> +
> += SUBDEVICES
> +
.
[snip]
.
> + Definition: resource as defined in <dt-bindings/soc/qcom/qcom,rpm.h>
> +
> +
> += EXAMPLE
> +
> + #include <dt-bindings/soc/qcom,rpm.h>
> +
> + rpm at 108000 {
> + compatible = "qcom,rpm-msm8960";
> + reg = <0x108000 0x1000>;
> + qcom,ipc = <&apcs 0x8 2>;
Tried adding this but there is no reference to 'apcs' registers itself
in any dts.
Without these changes rpm breaks hence not able to test SATA which needs rpm.
> +
> + interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
> + interrupt-names = "ack", "err", "wakeup";
> +
.
[snip]
.
> +
> +#endif
> --
> 1.8.2.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Thanks and Regards
Pramod
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
2014-07-16 0:08 ` Mark Brown
(?)
@ 2014-07-16 22:15 ` Bjorn Andersson
-1 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-16 22:15 UTC (permalink / raw)
To: Mark Brown
Cc: Bjorn Andersson, devicetree, linux-kernel, linux-arm-kernel,
linux-arm-msm
On Tue, Jul 15, 2014 at 5:08 PM, Mark Brown <broonie@kernel.org> wrote:
> On Tue, Jul 15, 2014 at 04:00:41PM -0700, Bjorn Andersson wrote:
>> Driver for regulators exposed by the Resource Power Manager (RPM) found
>> in Qualcomm 8660, 8960 and 8064 based devices.
>
> I have patch 3/3 here but no cover or other patches - what is the story
> there?
Hi Mark,
I forgot to add you as explicit recipient of the other mails in the
series, sorry about that. Please let me know if you would like to have
them resent.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-16 22:15 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-16 22:15 UTC (permalink / raw)
To: Mark Brown
Cc: Bjorn Andersson, devicetree, linux-kernel, linux-arm-kernel,
linux-arm-msm
On Tue, Jul 15, 2014 at 5:08 PM, Mark Brown <broonie@kernel.org> wrote:
> On Tue, Jul 15, 2014 at 04:00:41PM -0700, Bjorn Andersson wrote:
>> Driver for regulators exposed by the Resource Power Manager (RPM) found
>> in Qualcomm 8660, 8960 and 8064 based devices.
>
> I have patch 3/3 here but no cover or other patches - what is the story
> there?
Hi Mark,
I forgot to add you as explicit recipient of the other mails in the
series, sorry about that. Please let me know if you would like to have
them resent.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-16 22:15 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-16 22:15 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 15, 2014 at 5:08 PM, Mark Brown <broonie@kernel.org> wrote:
> On Tue, Jul 15, 2014 at 04:00:41PM -0700, Bjorn Andersson wrote:
>> Driver for regulators exposed by the Resource Power Manager (RPM) found
>> in Qualcomm 8660, 8960 and 8064 based devices.
>
> I have patch 3/3 here but no cover or other patches - what is the story
> there?
Hi Mark,
I forgot to add you as explicit recipient of the other mails in the
series, sorry about that. Please let me know if you would like to have
them resent.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
2014-07-16 7:01 ` pramod gurav
(?)
@ 2014-07-16 22:17 ` Bjorn Andersson
-1 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-16 22:17 UTC (permalink / raw)
To: pramod gurav
Cc: Bjorn Andersson, Mark Brown, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-arm-msm
On Wed, Jul 16, 2014 at 12:01 AM, pramod gurav
<pramod.gurav.etc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Hi Bjorn,
>
> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org> wrote:
[...]
>> +static const struct regulator_linear_range pldo_ranges[] = {
>> + REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
>
> ERROR: space prohibited after that open parenthesis '('
>
I prefer the nicely aligned columns over checkpatch correctness here.
>> + REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
>> + REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
>> +};
>> +
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-16 22:17 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-16 22:17 UTC (permalink / raw)
To: pramod gurav
Cc: Bjorn Andersson, Mark Brown, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
On Wed, Jul 16, 2014 at 12:01 AM, pramod gurav
<pramod.gurav.etc@gmail.com> wrote:
> Hi Bjorn,
>
> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> <bjorn.andersson@sonymobile.com> wrote:
[...]
>> +static const struct regulator_linear_range pldo_ranges[] = {
>> + REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
>
> ERROR: space prohibited after that open parenthesis '('
>
I prefer the nicely aligned columns over checkpatch correctness here.
>> + REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
>> + REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
>> +};
>> +
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-16 22:17 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-16 22:17 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 16, 2014 at 12:01 AM, pramod gurav
<pramod.gurav.etc@gmail.com> wrote:
> Hi Bjorn,
>
> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> <bjorn.andersson@sonymobile.com> wrote:
[...]
>> +static const struct regulator_linear_range pldo_ranges[] = {
>> + REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
>
> ERROR: space prohibited after that open parenthesis '('
>
I prefer the nicely aligned columns over checkpatch correctness here.
>> + REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000),
>> + REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000),
>> +};
>> +
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
2014-07-16 10:06 ` pramod gurav
(?)
@ 2014-07-16 22:20 ` Bjorn Andersson
-1 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-16 22:20 UTC (permalink / raw)
To: pramod gurav
Cc: Bjorn Andersson, Rob Herring, Pawel Moll, Mark Rutland,
devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
On Wed, Jul 16, 2014 at 3:06 AM, pramod gurav
<pramod.gurav.etc@gmail.com> wrote:
> Hi Bjorn,
>
> RPM breaks on IFC6410 without entry for 'qcom.ipc' node. Please find
> my observations below.
>
> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> <bjorn.andersson@sonymobile.com> wrote:
[...]
>> + rpm@108000 {
>> + compatible = "qcom,rpm-msm8960";
>> + reg = <0x108000 0x1000>;
>> + qcom,ipc = <&apcs 0x8 2>;
>
> Tried adding this but there is no reference to 'apcs' registers itself
> in any dts.
>
> Without these changes rpm breaks hence not able to test SATA which needs rpm.
>
Hi Pramod,
Unfortunately the ipc bits resides in a block that needs to be
accesses by various device drivers so I had to extract the access; so
you now need to reference it via a syscon handle and offset instead -
as described above.
The apcs node I used for testing this with looks like this:
apcs: syscon@2011000 {
compatible = "syscon";
reg = <0x2011000 0x1000>;
};
Enable CONFIG_MFD_SYSCON and put the dt snippet somewhere under soc
and you should be good.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-07-16 22:20 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-16 22:20 UTC (permalink / raw)
To: pramod gurav
Cc: Bjorn Andersson, Rob Herring, Pawel Moll, Mark Rutland,
devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
On Wed, Jul 16, 2014 at 3:06 AM, pramod gurav
<pramod.gurav.etc@gmail.com> wrote:
> Hi Bjorn,
>
> RPM breaks on IFC6410 without entry for 'qcom.ipc' node. Please find
> my observations below.
>
> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> <bjorn.andersson@sonymobile.com> wrote:
[...]
>> + rpm@108000 {
>> + compatible = "qcom,rpm-msm8960";
>> + reg = <0x108000 0x1000>;
>> + qcom,ipc = <&apcs 0x8 2>;
>
> Tried adding this but there is no reference to 'apcs' registers itself
> in any dts.
>
> Without these changes rpm breaks hence not able to test SATA which needs rpm.
>
Hi Pramod,
Unfortunately the ipc bits resides in a block that needs to be
accesses by various device drivers so I had to extract the access; so
you now need to reference it via a syscon handle and offset instead -
as described above.
The apcs node I used for testing this with looks like this:
apcs: syscon@2011000 {
compatible = "syscon";
reg = <0x2011000 0x1000>;
};
Enable CONFIG_MFD_SYSCON and put the dt snippet somewhere under soc
and you should be good.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-07-16 22:20 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-16 22:20 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 16, 2014 at 3:06 AM, pramod gurav
<pramod.gurav.etc@gmail.com> wrote:
> Hi Bjorn,
>
> RPM breaks on IFC6410 without entry for 'qcom.ipc' node. Please find
> my observations below.
>
> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> <bjorn.andersson@sonymobile.com> wrote:
[...]
>> + rpm at 108000 {
>> + compatible = "qcom,rpm-msm8960";
>> + reg = <0x108000 0x1000>;
>> + qcom,ipc = <&apcs 0x8 2>;
>
> Tried adding this but there is no reference to 'apcs' registers itself
> in any dts.
>
> Without these changes rpm breaks hence not able to test SATA which needs rpm.
>
Hi Pramod,
Unfortunately the ipc bits resides in a block that needs to be
accesses by various device drivers so I had to extract the access; so
you now need to reference it via a syscon handle and offset instead -
as described above.
The apcs node I used for testing this with looks like this:
apcs: syscon at 2011000 {
compatible = "syscon";
reg = <0x2011000 0x1000>;
};
Enable CONFIG_MFD_SYSCON and put the dt snippet somewhere under soc
and you should be good.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
2014-07-16 22:17 ` Bjorn Andersson
(?)
@ 2014-07-16 22:28 ` Mark Brown
-1 siblings, 0 replies; 43+ messages in thread
From: Mark Brown @ 2014-07-16 22:28 UTC (permalink / raw)
To: Bjorn Andersson
Cc: pramod gurav, Bjorn Andersson, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-arm-msm
[-- Attachment #1: Type: text/plain, Size: 510 bytes --]
On Wed, Jul 16, 2014 at 03:17:13PM -0700, Bjorn Andersson wrote:
> On Wed, Jul 16, 2014 at 12:01 AM, pramod gurav
> > On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> > <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org> wrote:
> >> +static const struct regulator_linear_range pldo_ranges[] = {
> >> + REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
> > ERROR: space prohibited after that open parenthesis '('
> I prefer the nicely aligned columns over checkpatch correctness here.
Me too.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-16 22:28 ` Mark Brown
0 siblings, 0 replies; 43+ messages in thread
From: Mark Brown @ 2014-07-16 22:28 UTC (permalink / raw)
To: Bjorn Andersson
Cc: pramod gurav, Bjorn Andersson, devicetree, linux-kernel,
linux-arm-kernel, linux-arm-msm
[-- Attachment #1: Type: text/plain, Size: 485 bytes --]
On Wed, Jul 16, 2014 at 03:17:13PM -0700, Bjorn Andersson wrote:
> On Wed, Jul 16, 2014 at 12:01 AM, pramod gurav
> > On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> > <bjorn.andersson@sonymobile.com> wrote:
> >> +static const struct regulator_linear_range pldo_ranges[] = {
> >> + REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
> > ERROR: space prohibited after that open parenthesis '('
> I prefer the nicely aligned columns over checkpatch correctness here.
Me too.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-16 22:28 ` Mark Brown
0 siblings, 0 replies; 43+ messages in thread
From: Mark Brown @ 2014-07-16 22:28 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 16, 2014 at 03:17:13PM -0700, Bjorn Andersson wrote:
> On Wed, Jul 16, 2014 at 12:01 AM, pramod gurav
> > On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> > <bjorn.andersson@sonymobile.com> wrote:
> >> +static const struct regulator_linear_range pldo_ranges[] = {
> >> + REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500),
> > ERROR: space prohibited after that open parenthesis '('
> I prefer the nicely aligned columns over checkpatch correctness here.
Me too.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140716/93638325/attachment.sig>
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
2014-07-16 22:15 ` Bjorn Andersson
(?)
@ 2014-07-16 22:30 ` Mark Brown
-1 siblings, 0 replies; 43+ messages in thread
From: Mark Brown @ 2014-07-16 22:30 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Bjorn Andersson, devicetree, linux-kernel, linux-arm-kernel,
linux-arm-msm
[-- Attachment #1: Type: text/plain, Size: 574 bytes --]
On Wed, Jul 16, 2014 at 03:15:16PM -0700, Bjorn Andersson wrote:
> On Tue, Jul 15, 2014 at 5:08 PM, Mark Brown <broonie@kernel.org> wrote:
> > I have patch 3/3 here but no cover or other patches - what is the story
> > there?
> I forgot to add you as explicit recipient of the other mails in the
> series, sorry about that. Please let me know if you would like to have
> them resent.
I mostly want to know about the dependencies - I guess the first couple
of patches define the QCOM_RPM interface, is that stable enough to go
ahead with the regulator driver for example?
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-16 22:30 ` Mark Brown
0 siblings, 0 replies; 43+ messages in thread
From: Mark Brown @ 2014-07-16 22:30 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Bjorn Andersson, devicetree, linux-kernel, linux-arm-kernel,
linux-arm-msm
[-- Attachment #1: Type: text/plain, Size: 574 bytes --]
On Wed, Jul 16, 2014 at 03:15:16PM -0700, Bjorn Andersson wrote:
> On Tue, Jul 15, 2014 at 5:08 PM, Mark Brown <broonie@kernel.org> wrote:
> > I have patch 3/3 here but no cover or other patches - what is the story
> > there?
> I forgot to add you as explicit recipient of the other mails in the
> series, sorry about that. Please let me know if you would like to have
> them resent.
I mostly want to know about the dependencies - I guess the first couple
of patches define the QCOM_RPM interface, is that stable enough to go
ahead with the regulator driver for example?
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
@ 2014-07-16 22:30 ` Mark Brown
0 siblings, 0 replies; 43+ messages in thread
From: Mark Brown @ 2014-07-16 22:30 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 16, 2014 at 03:15:16PM -0700, Bjorn Andersson wrote:
> On Tue, Jul 15, 2014 at 5:08 PM, Mark Brown <broonie@kernel.org> wrote:
> > I have patch 3/3 here but no cover or other patches - what is the story
> > there?
> I forgot to add you as explicit recipient of the other mails in the
> series, sorry about that. Please let me know if you would like to have
> them resent.
I mostly want to know about the dependencies - I guess the first couple
of patches define the QCOM_RPM interface, is that stable enough to go
ahead with the regulator driver for example?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140716/2e854a0e/attachment-0001.sig>
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
2014-07-16 22:20 ` Bjorn Andersson
(?)
@ 2014-07-17 16:04 ` pramod gurav
-1 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-17 16:04 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Bjorn Andersson, Rob Herring, Pawel Moll, Mark Rutland,
devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
On Thu, Jul 17, 2014 at 3:50 AM, Bjorn Andersson <bjorn@kryo.se> wrote:
>> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
>> <bjorn.andersson@sonymobile.com> wrote:
> [...]
>>> + rpm@108000 {
>>> + compatible = "qcom,rpm-msm8960";
>>> + reg = <0x108000 0x1000>;
>>> + qcom,ipc = <&apcs 0x8 2>;
>>
>> Tried adding this but there is no reference to 'apcs' registers itself
>> in any dts.
>>
>> Without these changes rpm breaks hence not able to test SATA which needs rpm.
>>
>
> Hi Pramod,
>
> Unfortunately the ipc bits resides in a block that needs to be
> accesses by various device drivers so I had to extract the access; so
> you now need to reference it via a syscon handle and offset instead -
> as described above.
>
> The apcs node I used for testing this with looks like this:
>
> apcs: syscon@2011000 {
> compatible = "syscon";
> reg = <0x2011000 0x1000>;
> };
>
> Enable CONFIG_MFD_SYSCON and put the dt snippet somewhere under soc
> and you should be good.
>
Thanks Bjorn. Did this and seen things working (sata atleast).
> Regards,
> Bjorn
--
Thanks and Regards
Pramod
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-07-17 16:04 ` pramod gurav
0 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-17 16:04 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Bjorn Andersson, Rob Herring, Pawel Moll, Mark Rutland,
devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
On Thu, Jul 17, 2014 at 3:50 AM, Bjorn Andersson <bjorn@kryo.se> wrote:
>> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
>> <bjorn.andersson@sonymobile.com> wrote:
> [...]
>>> + rpm@108000 {
>>> + compatible = "qcom,rpm-msm8960";
>>> + reg = <0x108000 0x1000>;
>>> + qcom,ipc = <&apcs 0x8 2>;
>>
>> Tried adding this but there is no reference to 'apcs' registers itself
>> in any dts.
>>
>> Without these changes rpm breaks hence not able to test SATA which needs rpm.
>>
>
> Hi Pramod,
>
> Unfortunately the ipc bits resides in a block that needs to be
> accesses by various device drivers so I had to extract the access; so
> you now need to reference it via a syscon handle and offset instead -
> as described above.
>
> The apcs node I used for testing this with looks like this:
>
> apcs: syscon@2011000 {
> compatible = "syscon";
> reg = <0x2011000 0x1000>;
> };
>
> Enable CONFIG_MFD_SYSCON and put the dt snippet somewhere under soc
> and you should be good.
>
Thanks Bjorn. Did this and seen things working (sata atleast).
> Regards,
> Bjorn
--
Thanks and Regards
Pramod
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
@ 2014-07-17 16:04 ` pramod gurav
0 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-17 16:04 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jul 17, 2014 at 3:50 AM, Bjorn Andersson <bjorn@kryo.se> wrote:
>> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
>> <bjorn.andersson@sonymobile.com> wrote:
> [...]
>>> + rpm at 108000 {
>>> + compatible = "qcom,rpm-msm8960";
>>> + reg = <0x108000 0x1000>;
>>> + qcom,ipc = <&apcs 0x8 2>;
>>
>> Tried adding this but there is no reference to 'apcs' registers itself
>> in any dts.
>>
>> Without these changes rpm breaks hence not able to test SATA which needs rpm.
>>
>
> Hi Pramod,
>
> Unfortunately the ipc bits resides in a block that needs to be
> accesses by various device drivers so I had to extract the access; so
> you now need to reference it via a syscon handle and offset instead -
> as described above.
>
> The apcs node I used for testing this with looks like this:
>
> apcs: syscon at 2011000 {
> compatible = "syscon";
> reg = <0x2011000 0x1000>;
> };
>
> Enable CONFIG_MFD_SYSCON and put the dt snippet somewhere under soc
> and you should be good.
>
Thanks Bjorn. Did this and seen things working (sata atleast).
> Regards,
> Bjorn
--
Thanks and Regards
Pramod
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
2014-07-15 23:00 ` Bjorn Andersson
(?)
@ 2014-07-17 17:33 ` pramod gurav
-1 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-17 17:33 UTC (permalink / raw)
To: Bjorn Andersson; +Cc: devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
Hi Bjorn,
On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
<bjorn.andersson@sonymobile.com> wrote:
> Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
> and 8064 based devices. The driver exposes resources that child drivers
> can operate on; to implementing regulator, clock and bus frequency
> drivers.
>
[snip]
> + }
> +
> + ret = irq_set_irq_wake(irq_ack, 1);
This calls fails and throws error on my ifc6410 with 3.16-rc5.
Does this driver depend on pincntrl. Looks like the DT support for
pincntrl driver is missing in apq8064 dts in mainline.
Is that right?
> + if (ret)
> + dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
> +
[snip]
> + return ret;
> + }
> +
> + ret = irq_set_irq_wake(irq_wakeup, 1);
This fails as well.
> + if (ret)
> + dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
> +
> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
[snip]
--
Thanks and Regards
Pramod
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
@ 2014-07-17 17:33 ` pramod gurav
0 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-17 17:33 UTC (permalink / raw)
To: Bjorn Andersson; +Cc: devicetree, linux-kernel, linux-arm-kernel, linux-arm-msm
Hi Bjorn,
On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
<bjorn.andersson@sonymobile.com> wrote:
> Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
> and 8064 based devices. The driver exposes resources that child drivers
> can operate on; to implementing regulator, clock and bus frequency
> drivers.
>
[snip]
> + }
> +
> + ret = irq_set_irq_wake(irq_ack, 1);
This calls fails and throws error on my ifc6410 with 3.16-rc5.
Does this driver depend on pincntrl. Looks like the DT support for
pincntrl driver is missing in apq8064 dts in mainline.
Is that right?
> + if (ret)
> + dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
> +
[snip]
> + return ret;
> + }
> +
> + ret = irq_set_irq_wake(irq_wakeup, 1);
This fails as well.
> + if (ret)
> + dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
> +
> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
[snip]
--
Thanks and Regards
Pramod
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
@ 2014-07-17 17:33 ` pramod gurav
0 siblings, 0 replies; 43+ messages in thread
From: pramod gurav @ 2014-07-17 17:33 UTC (permalink / raw)
To: linux-arm-kernel
Hi Bjorn,
On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
<bjorn.andersson@sonymobile.com> wrote:
> Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
> and 8064 based devices. The driver exposes resources that child drivers
> can operate on; to implementing regulator, clock and bus frequency
> drivers.
>
[snip]
> + }
> +
> + ret = irq_set_irq_wake(irq_ack, 1);
This calls fails and throws error on my ifc6410 with 3.16-rc5.
Does this driver depend on pincntrl. Looks like the DT support for
pincntrl driver is missing in apq8064 dts in mainline.
Is that right?
> + if (ret)
> + dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
> +
[snip]
> + return ret;
> + }
> +
> + ret = irq_set_irq_wake(irq_wakeup, 1);
This fails as well.
> + if (ret)
> + dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
> +
> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
[snip]
--
Thanks and Regards
Pramod
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
2014-07-17 17:33 ` pramod gurav
(?)
@ 2014-07-17 18:17 ` Bjorn Andersson
-1 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-17 18:17 UTC (permalink / raw)
To: pramod gurav
Cc: Bjorn Andersson, devicetree, linux-kernel, linux-arm-kernel,
linux-arm-msm
On Thu, Jul 17, 2014 at 10:33 AM, pramod gurav
<pramod.gurav.etc@gmail.com> wrote:
> Hi Bjorn,
>
> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> <bjorn.andersson@sonymobile.com> wrote:
>> Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
>> and 8064 based devices. The driver exposes resources that child drivers
>> can operate on; to implementing regulator, clock and bus frequency
>> drivers.
>>
>
> [snip]
>
>> + }
>> +
>> + ret = irq_set_irq_wake(irq_ack, 1);
>
> This calls fails and throws error on my ifc6410 with 3.16-rc5.
> Does this driver depend on pincntrl. Looks like the DT support for
> pincntrl driver is missing in apq8064 dts in mainline.
> Is that right?
>
This is a gic interrupt, to it's unrelated to pinctrl.
What happens is that you end up in gic_set_wake() checking for the
architecture specific implementation of irq_set_wake; on modern
Qualcomm platforms waking the system up from sleep seems to be handled
in it's entirety by the "Modem Power Manager" (or "MSM Power Manager")
- in short MPM.
So once we introduce a driver for the mpm hardware this should
register these functions with the gic and we should get those marked
as wakeup sources.
It can be argued that this should be an error instead of just a
"warning", but for systems where this fails; i.e. systems without the
mpm driver we will not be able to go to sleep anyways, so if this call
fails we shouldn't expect to ever be woken up again.
So please ignore this warning for now; we will get there at some point.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v4 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
@ 2014-07-17 18:17 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-17 18:17 UTC (permalink / raw)
To: pramod gurav
Cc: Bjorn Andersson, devicetree, linux-kernel, linux-arm-kernel,
linux-arm-msm
On Thu, Jul 17, 2014 at 10:33 AM, pramod gurav
<pramod.gurav.etc@gmail.com> wrote:
> Hi Bjorn,
>
> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> <bjorn.andersson@sonymobile.com> wrote:
>> Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
>> and 8064 based devices. The driver exposes resources that child drivers
>> can operate on; to implementing regulator, clock and bus frequency
>> drivers.
>>
>
> [snip]
>
>> + }
>> +
>> + ret = irq_set_irq_wake(irq_ack, 1);
>
> This calls fails and throws error on my ifc6410 with 3.16-rc5.
> Does this driver depend on pincntrl. Looks like the DT support for
> pincntrl driver is missing in apq8064 dts in mainline.
> Is that right?
>
This is a gic interrupt, to it's unrelated to pinctrl.
What happens is that you end up in gic_set_wake() checking for the
architecture specific implementation of irq_set_wake; on modern
Qualcomm platforms waking the system up from sleep seems to be handled
in it's entirety by the "Modem Power Manager" (or "MSM Power Manager")
- in short MPM.
So once we introduce a driver for the mpm hardware this should
register these functions with the gic and we should get those marked
as wakeup sources.
It can be argued that this should be an error instead of just a
"warning", but for systems where this fails; i.e. systems without the
mpm driver we will not be able to go to sleep anyways, so if this call
fails we shouldn't expect to ever be woken up again.
So please ignore this warning for now; we will get there at some point.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
* [PATCH v4 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM
@ 2014-07-17 18:17 ` Bjorn Andersson
0 siblings, 0 replies; 43+ messages in thread
From: Bjorn Andersson @ 2014-07-17 18:17 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jul 17, 2014 at 10:33 AM, pramod gurav
<pramod.gurav.etc@gmail.com> wrote:
> Hi Bjorn,
>
> On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
> <bjorn.andersson@sonymobile.com> wrote:
>> Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960
>> and 8064 based devices. The driver exposes resources that child drivers
>> can operate on; to implementing regulator, clock and bus frequency
>> drivers.
>>
>
> [snip]
>
>> + }
>> +
>> + ret = irq_set_irq_wake(irq_ack, 1);
>
> This calls fails and throws error on my ifc6410 with 3.16-rc5.
> Does this driver depend on pincntrl. Looks like the DT support for
> pincntrl driver is missing in apq8064 dts in mainline.
> Is that right?
>
This is a gic interrupt, to it's unrelated to pinctrl.
What happens is that you end up in gic_set_wake() checking for the
architecture specific implementation of irq_set_wake; on modern
Qualcomm platforms waking the system up from sleep seems to be handled
in it's entirety by the "Modem Power Manager" (or "MSM Power Manager")
- in short MPM.
So once we introduce a driver for the mpm hardware this should
register these functions with the gic and we should get those marked
as wakeup sources.
It can be argued that this should be an error instead of just a
"warning", but for systems where this fails; i.e. systems without the
mpm driver we will not be able to go to sleep anyways, so if this call
fails we shouldn't expect to ever be woken up again.
So please ignore this warning for now; we will get there at some point.
Regards,
Bjorn
^ permalink raw reply [flat|nested] 43+ messages in thread
end of thread, other threads:[~2014-07-17 18:17 UTC | newest]
Thread overview: 43+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-15 23:00 [PATCH v4 0/3] Qualcomm Resource Power Manager driver Bjorn Andersson
2014-07-15 23:00 ` Bjorn Andersson
2014-07-15 23:00 ` Bjorn Andersson
2014-07-15 23:00 ` [PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding Bjorn Andersson
2014-07-15 23:00 ` Bjorn Andersson
2014-07-15 23:00 ` Bjorn Andersson
[not found] ` <1405465241-28684-2-git-send-email-bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
2014-07-16 10:06 ` pramod gurav
2014-07-16 10:06 ` pramod gurav
2014-07-16 10:06 ` pramod gurav
2014-07-16 22:20 ` Bjorn Andersson
2014-07-16 22:20 ` Bjorn Andersson
2014-07-16 22:20 ` Bjorn Andersson
2014-07-17 16:04 ` pramod gurav
2014-07-17 16:04 ` pramod gurav
2014-07-17 16:04 ` pramod gurav
2014-07-15 23:00 ` [PATCH v4 2/3] soc: qcom-rpm: Driver for the Qualcomm RPM Bjorn Andersson
2014-07-15 23:00 ` Bjorn Andersson
2014-07-15 23:00 ` Bjorn Andersson
2014-07-17 17:33 ` pramod gurav
2014-07-17 17:33 ` pramod gurav
2014-07-17 17:33 ` pramod gurav
2014-07-17 18:17 ` Bjorn Andersson
2014-07-17 18:17 ` Bjorn Andersson
2014-07-17 18:17 ` Bjorn Andersson
2014-07-15 23:00 ` [PATCH v4 3/3] regulator: qcom-rpm: Regulator driver " Bjorn Andersson
2014-07-15 23:00 ` Bjorn Andersson
2014-07-15 23:00 ` Bjorn Andersson
2014-07-16 0:08 ` Mark Brown
2014-07-16 0:08 ` Mark Brown
2014-07-16 22:15 ` Bjorn Andersson
2014-07-16 22:15 ` Bjorn Andersson
2014-07-16 22:15 ` Bjorn Andersson
2014-07-16 22:30 ` Mark Brown
2014-07-16 22:30 ` Mark Brown
2014-07-16 22:30 ` Mark Brown
2014-07-16 7:01 ` pramod gurav
2014-07-16 7:01 ` pramod gurav
[not found] ` <CAMf-jSn2YHF7ihRpXMfkPWYt8pNCj4o395OGha3BHD3K3mUv9g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-16 22:17 ` Bjorn Andersson
2014-07-16 22:17 ` Bjorn Andersson
2014-07-16 22:17 ` Bjorn Andersson
[not found] ` <CAJAp7Oj1R-EkJoSdLEa6SBLbzE_N1MjsystQ9Z+x4L_SjU=56w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-16 22:28 ` Mark Brown
2014-07-16 22:28 ` Mark Brown
2014-07-16 22:28 ` Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.