From: Stanimir Varbanov <stanimir.varbanov@linaro.org> To: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, Russell King <linux@arm.linux.org.uk>, Rob Herring <robh+dt@kernel.org>, Rob Herring <robh@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Pawel Moll <pawel.moll@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Arnd Bergmann <arnd@arndb.de>, Jingoo Han <jingoohan1@gmail.com>, Pratyush Anand <pratyush.anand@gmail.com>, Bjorn Andersson <bjorn.andersson@sonymobile.com>, Stanimir Varbanov <stanimir.varbanov@linaro.org> Subject: [PATCH v5 5/5] ARM: dts: ifc6410: enable pcie dt node for this board Date: Fri, 18 Dec 2015 14:38:59 +0200 [thread overview] Message-ID: <1450442339-18765-6-git-send-email-stanimir.varbanov@linaro.org> (raw) In-Reply-To: <1450442339-18765-1-git-send-email-stanimir.varbanov@linaro.org> Enable pcie dt node and fill pcie dt node with regulator, pinctrl and reset gpio, to use the pcie on the ifc6410 board. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index f40e93f09673..4584850add62 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -47,6 +47,18 @@ bias-disable; }; }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; }; rpm@108000 { @@ -123,6 +135,10 @@ lvs1 { bias-pull-down; }; + + lvs6 { + bias-pull-down; + }; }; }; @@ -231,6 +247,16 @@ status = "okay"; }; + pci@1b500000 { + status = "ok"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + qcom,ssbi@500000 { pmic@0 { gpio@150 { -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: stanimir.varbanov@linaro.org (Stanimir Varbanov) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 5/5] ARM: dts: ifc6410: enable pcie dt node for this board Date: Fri, 18 Dec 2015 14:38:59 +0200 [thread overview] Message-ID: <1450442339-18765-6-git-send-email-stanimir.varbanov@linaro.org> (raw) In-Reply-To: <1450442339-18765-1-git-send-email-stanimir.varbanov@linaro.org> Enable pcie dt node and fill pcie dt node with regulator, pinctrl and reset gpio, to use the pcie on the ifc6410 board. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index f40e93f09673..4584850add62 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -47,6 +47,18 @@ bias-disable; }; }; + + pcie_pins: pcie_pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; }; rpm at 108000 { @@ -123,6 +135,10 @@ lvs1 { bias-pull-down; }; + + lvs6 { + bias-pull-down; + }; }; }; @@ -231,6 +247,16 @@ status = "okay"; }; + pci at 1b500000 { + status = "ok"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&ext_3p3v>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + qcom,ssbi at 500000 { pmic at 0 { gpio at 150 { -- 1.7.9.5
next prev parent reply other threads:[~2015-12-18 12:38 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-12-18 12:38 [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes Stanimir Varbanov 2015-12-18 12:38 ` Stanimir Varbanov 2015-12-18 12:38 ` [PATCH v5 1/5] PCI: designware: ensure ATU is enabled before IO/conf space accesses Stanimir Varbanov 2015-12-18 12:38 ` Stanimir Varbanov 2015-12-18 14:41 ` Pratyush Anand 2015-12-18 14:41 ` Pratyush Anand 2015-12-18 14:41 ` Pratyush Anand 2016-01-04 14:31 ` Stanimir Varbanov 2016-01-04 14:31 ` Stanimir Varbanov 2016-01-04 14:31 ` Stanimir Varbanov 2016-01-06 18:20 ` Bjorn Helgaas 2016-01-06 18:20 ` Bjorn Helgaas 2016-01-07 6:33 ` Jisheng Zhang 2016-01-07 6:33 ` Jisheng Zhang 2016-01-07 6:33 ` Jisheng Zhang 2015-12-18 12:38 ` [PATCH v5 2/5] DT: PCI: qcom: Document PCIe devicetree bindings Stanimir Varbanov 2015-12-18 12:38 ` Stanimir Varbanov 2015-12-18 12:38 ` [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver Stanimir Varbanov 2015-12-18 12:38 ` Stanimir Varbanov 2015-12-18 12:38 ` Stanimir Varbanov 2015-12-18 13:44 ` [PATCH] PCI: qcom: fix ptr_ret.cocci warnings kbuild test robot 2015-12-18 13:44 ` kbuild test robot 2015-12-18 13:44 ` kbuild test robot 2015-12-18 13:44 ` [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver kbuild test robot 2015-12-18 13:44 ` kbuild test robot 2015-12-18 13:44 ` kbuild test robot 2015-12-20 23:10 ` Bjorn Andersson 2015-12-20 23:10 ` Bjorn Andersson 2015-12-20 23:10 ` Bjorn Andersson 2015-12-21 23:04 ` Arnd Bergmann 2015-12-21 23:04 ` Arnd Bergmann 2015-12-21 23:04 ` Arnd Bergmann 2015-12-18 12:38 ` [PATCH v5 4/5] ARM: dts: apq8064: add pcie devicetree node Stanimir Varbanov 2015-12-18 12:38 ` Stanimir Varbanov 2015-12-18 12:38 ` Stanimir Varbanov [this message] 2015-12-18 12:38 ` [PATCH v5 5/5] ARM: dts: ifc6410: enable pcie dt node for this board Stanimir Varbanov 2016-01-05 21:42 ` [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes Bjorn Helgaas 2016-01-05 21:42 ` Bjorn Helgaas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1450442339-18765-6-git-send-email-stanimir.varbanov@linaro.org \ --to=stanimir.varbanov@linaro.org \ --cc=arnd@arndb.de \ --cc=bhelgaas@google.com \ --cc=bjorn.andersson@sonymobile.com \ --cc=devicetree@vger.kernel.org \ --cc=ijc+devicetree@hellion.org.uk \ --cc=jingoohan1@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=mark.rutland@arm.com \ --cc=pawel.moll@arm.com \ --cc=pratyush.anand@gmail.com \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ --cc=srinivas.kandagatla@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.