[PATCH V5 00/17] powerpc/mm/ppc64: Add 128TB support

[PATCH V5 00/17] powerpc/mm/ppc64: Add 128TB support

[Aneesh Kumar K.V]

This patch series increase the effective virtual address range of
applications from 64TB to 128TB. We do that by supporting a 
68 bit virtual address. On platforms that can only do 65 bit virtual
address we limit the max contexts to a 16bit value instead of 19.

The patch series also switch the page table layout such that we can
do 512TB effective address. Userspace can ask for allocation from
the full 512TB address space by specifying hint address
(with or without MAP_FIXED) above 128TB.


Changes from V4:
* Rebase to latest upstream
* Add support 512TB mmap.

Changes from V3:
* Rebase to latest upstream
* Fixes based on testing

Changes from V2:
* Handle hugepage size correctly.


Aneesh Kumar K.V (17):
  powerpc/mm/slice: Convert slice_mask high slice to a bitmap
  powerpc/mm/slice: Update the function prototype
  powerpc/mm: Move copy_mm_to_paca to paca.c
  powerpc/mm: Remove redundant TASK_SIZE_USER64 checks
  powerpc/mm/slice: Move slice_mask struct definition to slice.c
  powerpc/mm/slice: Update slice mask printing to use bitmap printing.
  powerpc/mm/hash: Move kernel context to the starting of context range
  powerpc/mm/hash: Support 68 bit VA
  powerpc/mm/hash: VSID 0 is no more an invalid VSID
  powerpc/mm/hash: Convert mask to unsigned long
  powerpc/mm/hash: Increase VA range to 128TB
  powerpc/mm/slice: Use mm task_size as max value of slice index
  powerpc/mm/hash: Store task size in PACA
  powerpc/mm/hash: Skip using reserved virtual address range
  powerpc/mm: Switch TASK_SIZE check to use mm->task_size
  mm: Let arch choose the initial value of task size
  powerpc/mm: Enable mappings above 128TB

 arch/powerpc/include/asm/book3s/64/hash-4k.h  |   2 +-
 arch/powerpc/include/asm/book3s/64/hash-64k.h |   2 +-
 arch/powerpc/include/asm/book3s/64/mmu-hash.h | 178 ++++++++++--------
 arch/powerpc/include/asm/kvm_book3s_64.h      |   2 -
 arch/powerpc/include/asm/mmu.h                |  19 +-
 arch/powerpc/include/asm/mmu_context.h        |   3 +-
 arch/powerpc/include/asm/paca.h               |  22 +--
 arch/powerpc/include/asm/page_64.h            |  14 --
 arch/powerpc/include/asm/processor.h          |  45 ++++-
 arch/powerpc/kernel/asm-offsets.c             |   4 +
 arch/powerpc/kernel/paca.c                    |  21 +++
 arch/powerpc/kernel/setup-common.c            |   9 +
 arch/powerpc/kvm/book3s_64_mmu_host.c         |  10 +-
 arch/powerpc/mm/hash_utils_64.c               |  86 +++++++--
 arch/powerpc/mm/hugetlbpage-radix.c           |  11 +-
 arch/powerpc/mm/init_64.c                     |   4 -
 arch/powerpc/mm/mmap.c                        |  41 +++--
 arch/powerpc/mm/mmu_context_book3s64.c        | 130 ++++++++++---
 arch/powerpc/mm/pgtable-hash64.c              |   1 -
 arch/powerpc/mm/pgtable_64.c                  |   5 -
 arch/powerpc/mm/slb.c                         |   2 +-
 arch/powerpc/mm/slb_low.S                     |  82 ++++++---
 arch/powerpc/mm/slice.c                       | 253 ++++++++++++++++----------
 arch/powerpc/mm/subpage-prot.c                |   3 +-
 arch/powerpc/mm/tlb_hash64.c                  |   1 -
 fs/exec.c                                     |  10 +-
 26 files changed, 631 insertions(+), 329 deletions(-)

-- 
2.7.4

[PATCH V5 01/17] powerpc/mm/slice: Convert slice_mask high slice to a bitmap

[Aneesh Kumar K.V]

In followup patch we want to increase the va range which will result
in us requiring high_slices to have more than 64 bits. To enable this
convert high_slices to bitmap. We keep the number bits same in this patch
and later change that to higher value

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/page_64.h |  15 ++---
 arch/powerpc/mm/slice.c            | 110 +++++++++++++++++++++++++------------
 2 files changed, 80 insertions(+), 45 deletions(-)

diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 3e83d2a20b6f..bd55ff751938 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -98,19 +98,16 @@ extern u64 ppc64_pft_size;
 #define GET_LOW_SLICE_INDEX(addr)	((addr) >> SLICE_LOW_SHIFT)
 #define GET_HIGH_SLICE_INDEX(addr)	((addr) >> SLICE_HIGH_SHIFT)
 
+#ifndef __ASSEMBLY__
 /*
- * 1 bit per slice and we have one slice per 1TB
- * Right now we support only 64TB.
- * IF we change this we will have to change the type
- * of high_slices
+ * One bit per slice. We have lower slices which cover 256MB segments
+ * upto 4G range. That gets us 16 low slices. For the rest we track slices
+ * in 1TB size.
+ * 64 below is actually SLICE_NUM_HIGH to fixup complie errros
  */
-#define SLICE_MASK_SIZE 8
-
-#ifndef __ASSEMBLY__
-
 struct slice_mask {
 	u16 low_slices;
-	u64 high_slices;
+	DECLARE_BITMAP(high_slices, 64);
 };
 
 struct mm_struct;
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index bf150557dba8..b3919b2e76d3 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -36,11 +36,6 @@
 #include <asm/copro.h>
 #include <asm/hugetlb.h>
 
-/* some sanity checks */
-#if (H_PGTABLE_RANGE >> 43) > SLICE_MASK_SIZE
-#error H_PGTABLE_RANGE exceeds slice_mask high_slices size
-#endif
-
 static DEFINE_SPINLOCK(slice_convert_lock);
 
 
@@ -49,7 +44,7 @@ int _slice_debug = 1;
 
 static void slice_print_mask(const char *label, struct slice_mask mask)
 {
-	char	*p, buf[16 + 3 + 64 + 1];
+	char	*p, buf[SLICE_NUM_LOW + 3 + SLICE_NUM_HIGH + 1];
 	int	i;
 
 	if (!_slice_debug)
@@ -60,8 +55,12 @@ static void slice_print_mask(const char *label, struct slice_mask mask)
 	*(p++) = ' ';
 	*(p++) = '-';
 	*(p++) = ' ';
-	for (i = 0; i < SLICE_NUM_HIGH; i++)
-		*(p++) = (mask.high_slices & (1ul << i)) ? '1' : '0';
+	for (i = 0; i < SLICE_NUM_HIGH; i++) {
+		if (test_bit(i, mask.high_slices))
+			*(p++) = '1';
+		else
+			*(p++) = '0';
+	}
 	*(p++) = 0;
 
 	printk(KERN_DEBUG "%s:%s\n", label, buf);
@@ -80,7 +79,10 @@ static struct slice_mask slice_range_to_mask(unsigned long start,
 					     unsigned long len)
 {
 	unsigned long end = start + len - 1;
-	struct slice_mask ret = { 0, 0 };
+	struct slice_mask ret;
+
+	ret.low_slices = 0;
+	bitmap_zero(ret.high_slices, SLICE_NUM_HIGH);
 
 	if (start < SLICE_LOW_TOP) {
 		unsigned long mend = min(end, (SLICE_LOW_TOP - 1));
@@ -89,10 +91,13 @@ static struct slice_mask slice_range_to_mask(unsigned long start,
 			- (1u << GET_LOW_SLICE_INDEX(start));
 	}
 
-	if ((start + len) > SLICE_LOW_TOP)
-		ret.high_slices = (1ul << (GET_HIGH_SLICE_INDEX(end) + 1))
-			- (1ul << GET_HIGH_SLICE_INDEX(start));
+	if ((start + len) > SLICE_LOW_TOP) {
+		unsigned long start_index = GET_HIGH_SLICE_INDEX(start);
+		unsigned long align_end = ALIGN(end, (1UL << SLICE_HIGH_SHIFT));
+		unsigned long count = GET_HIGH_SLICE_INDEX(align_end) - start_index;
 
+		bitmap_set(ret.high_slices, start_index, count);
+	}
 	return ret;
 }
 
@@ -129,9 +134,12 @@ static int slice_high_has_vma(struct mm_struct *mm, unsigned long slice)
 
 static struct slice_mask slice_mask_for_free(struct mm_struct *mm)
 {
-	struct slice_mask ret = { 0, 0 };
+	struct slice_mask ret;
 	unsigned long i;
 
+	ret.low_slices = 0;
+	bitmap_zero(ret.high_slices, SLICE_NUM_HIGH);
+
 	for (i = 0; i < SLICE_NUM_LOW; i++)
 		if (!slice_low_has_vma(mm, i))
 			ret.low_slices |= 1u << i;
@@ -141,7 +149,7 @@ static struct slice_mask slice_mask_for_free(struct mm_struct *mm)
 
 	for (i = 0; i < SLICE_NUM_HIGH; i++)
 		if (!slice_high_has_vma(mm, i))
-			ret.high_slices |= 1ul << i;
+			__set_bit(i, ret.high_slices);
 
 	return ret;
 }
@@ -150,10 +158,13 @@ static struct slice_mask slice_mask_for_size(struct mm_struct *mm, int psize)
 {
 	unsigned char *hpsizes;
 	int index, mask_index;
-	struct slice_mask ret = { 0, 0 };
+	struct slice_mask ret;
 	unsigned long i;
 	u64 lpsizes;
 
+	ret.low_slices = 0;
+	bitmap_zero(ret.high_slices, SLICE_NUM_HIGH);
+
 	lpsizes = mm->context.low_slices_psize;
 	for (i = 0; i < SLICE_NUM_LOW; i++)
 		if (((lpsizes >> (i * 4)) & 0xf) == psize)
@@ -164,7 +175,7 @@ static struct slice_mask slice_mask_for_size(struct mm_struct *mm, int psize)
 		mask_index = i & 0x1;
 		index = i >> 1;
 		if (((hpsizes[index] >> (mask_index * 4)) & 0xf) == psize)
-			ret.high_slices |= 1ul << i;
+			__set_bit(i, ret.high_slices);
 	}
 
 	return ret;
@@ -172,8 +183,13 @@ static struct slice_mask slice_mask_for_size(struct mm_struct *mm, int psize)
 
 static int slice_check_fit(struct slice_mask mask, struct slice_mask available)
 {
+	DECLARE_BITMAP(result, SLICE_NUM_HIGH);
+
+	bitmap_and(result, mask.high_slices,
+		   available.high_slices, SLICE_NUM_HIGH);
+
 	return (mask.low_slices & available.low_slices) == mask.low_slices &&
-		(mask.high_slices & available.high_slices) == mask.high_slices;
+		bitmap_equal(result, mask.high_slices, SLICE_NUM_HIGH);
 }
 
 static void slice_flush_segments(void *parm)
@@ -220,7 +236,7 @@ static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psiz
 	for (i = 0; i < SLICE_NUM_HIGH; i++) {
 		mask_index = i & 0x1;
 		index = i >> 1;
-		if (mask.high_slices & (1ul << i))
+		if (test_bit(i, mask.high_slices))
 			hpsizes[index] = (hpsizes[index] &
 					  ~(0xf << (mask_index * 4))) |
 				(((unsigned long)psize) << (mask_index * 4));
@@ -256,7 +272,7 @@ static bool slice_scan_available(unsigned long addr,
 		slice = GET_HIGH_SLICE_INDEX(addr);
 		*boundary_addr = (slice + end) ?
 			((slice + end) << SLICE_HIGH_SHIFT) : SLICE_LOW_TOP;
-		return !!(available.high_slices & (1ul << slice));
+		return !!test_bit(slice, available.high_slices);
 	}
 }
 
@@ -363,15 +379,24 @@ static unsigned long slice_find_area(struct mm_struct *mm, unsigned long len,
 		return slice_find_area_bottomup(mm, len, mask, psize);
 }
 
-#define or_mask(dst, src)	do {			\
-	(dst).low_slices |= (src).low_slices;		\
-	(dst).high_slices |= (src).high_slices;		\
-} while (0)
+static inline void slice_or_mask(struct slice_mask *dst, struct slice_mask *src)
+{
+	DECLARE_BITMAP(result, SLICE_NUM_HIGH);
 
-#define andnot_mask(dst, src)	do {			\
-	(dst).low_slices &= ~(src).low_slices;		\
-	(dst).high_slices &= ~(src).high_slices;	\
-} while (0)
+	dst->low_slices |= src->low_slices;
+	bitmap_or(result, dst->high_slices, src->high_slices, SLICE_NUM_HIGH);
+	bitmap_copy(dst->high_slices, result, SLICE_NUM_HIGH);
+}
+
+static inline void slice_andnot_mask(struct slice_mask *dst, struct slice_mask *src)
+{
+	DECLARE_BITMAP(result, SLICE_NUM_HIGH);
+
+	dst->low_slices &= ~src->low_slices;
+
+	bitmap_andnot(result, dst->high_slices, src->high_slices, SLICE_NUM_HIGH);
+	bitmap_copy(dst->high_slices, result, SLICE_NUM_HIGH);
+}
 
 #ifdef CONFIG_PPC_64K_PAGES
 #define MMU_PAGE_BASE	MMU_PAGE_64K
@@ -383,15 +408,28 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 				      unsigned long flags, unsigned int psize,
 				      int topdown)
 {
-	struct slice_mask mask = {0, 0};
+	struct slice_mask mask;
 	struct slice_mask good_mask;
-	struct slice_mask potential_mask = {0,0} /* silence stupid warning */;
-	struct slice_mask compat_mask = {0, 0};
+	struct slice_mask potential_mask;
+	struct slice_mask compat_mask;
 	int fixed = (flags & MAP_FIXED);
 	int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT);
 	struct mm_struct *mm = current->mm;
 	unsigned long newaddr;
 
+	/*
+	 * init different masks
+	 */
+	mask.low_slices = 0;
+	bitmap_zero(mask.high_slices, SLICE_NUM_HIGH);
+
+	/* silence stupid warning */;
+	potential_mask.low_slices = 0;
+	bitmap_zero(potential_mask.high_slices, SLICE_NUM_HIGH);
+
+	compat_mask.low_slices = 0;
+	bitmap_zero(compat_mask.high_slices, SLICE_NUM_HIGH);
+
 	/* Sanity checks */
 	BUG_ON(mm->task_size == 0);
 	VM_BUG_ON(radix_enabled());
@@ -449,7 +487,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	if (psize == MMU_PAGE_64K) {
 		compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K);
 		if (fixed)
-			or_mask(good_mask, compat_mask);
+			slice_or_mask(&good_mask, &compat_mask);
 	}
 #endif
 
@@ -484,7 +522,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	 * empty and thus can be converted
 	 */
 	potential_mask = slice_mask_for_free(mm);
-	or_mask(potential_mask, good_mask);
+	slice_or_mask(&potential_mask, &good_mask);
 	slice_print_mask(" potential", potential_mask);
 
 	if ((addr != 0 || fixed) && slice_check_fit(mask, potential_mask)) {
@@ -517,7 +555,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 #ifdef CONFIG_PPC_64K_PAGES
 	if (addr == -ENOMEM && psize == MMU_PAGE_64K) {
 		/* retry the search with 4k-page slices included */
-		or_mask(potential_mask, compat_mask);
+		slice_or_mask(&potential_mask, &compat_mask);
 		addr = slice_find_area(mm, len, potential_mask, psize,
 				       topdown);
 	}
@@ -531,8 +569,8 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	slice_print_mask(" mask", mask);
 
  convert:
-	andnot_mask(mask, good_mask);
-	andnot_mask(mask, compat_mask);
+	slice_andnot_mask(&mask, &good_mask);
+	slice_andnot_mask(&mask, &compat_mask);
 	if (mask.low_slices || mask.high_slices) {
 		slice_convert(mm, mask, psize);
 		if (psize > MMU_PAGE_BASE)
@@ -700,7 +738,7 @@ int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
 	if (psize == MMU_PAGE_64K) {
 		struct slice_mask compat_mask;
 		compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K);
-		or_mask(available, compat_mask);
+		slice_or_mask(&available, &compat_mask);
 	}
 #endif
 
-- 
2.7.4

[PATCH V5 02/17] powerpc/mm/slice: Update the function prototype

[Aneesh Kumar K.V]

This avoid copying the slice_mask struct as function return value

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/mm/slice.c | 62 ++++++++++++++++++++++---------------------------
 1 file changed, 28 insertions(+), 34 deletions(-)

diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index b3919b2e76d3..2396db6b3a05 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -75,19 +75,18 @@ static void slice_print_mask(const char *label, struct slice_mask mask) {}
 
 #endif
 
-static struct slice_mask slice_range_to_mask(unsigned long start,
-					     unsigned long len)
+static void slice_range_to_mask(unsigned long start, unsigned long len,
+				struct slice_mask *ret)
 {
 	unsigned long end = start + len - 1;
-	struct slice_mask ret;
 
-	ret.low_slices = 0;
-	bitmap_zero(ret.high_slices, SLICE_NUM_HIGH);
+	ret->low_slices = 0;
+	bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
 
 	if (start < SLICE_LOW_TOP) {
 		unsigned long mend = min(end, (SLICE_LOW_TOP - 1));
 
-		ret.low_slices = (1u << (GET_LOW_SLICE_INDEX(mend) + 1))
+		ret->low_slices = (1u << (GET_LOW_SLICE_INDEX(mend) + 1))
 			- (1u << GET_LOW_SLICE_INDEX(start));
 	}
 
@@ -96,9 +95,8 @@ static struct slice_mask slice_range_to_mask(unsigned long start,
 		unsigned long align_end = ALIGN(end, (1UL << SLICE_HIGH_SHIFT));
 		unsigned long count = GET_HIGH_SLICE_INDEX(align_end) - start_index;
 
-		bitmap_set(ret.high_slices, start_index, count);
+		bitmap_set(ret->high_slices, start_index, count);
 	}
-	return ret;
 }
 
 static int slice_area_is_free(struct mm_struct *mm, unsigned long addr,
@@ -132,53 +130,47 @@ static int slice_high_has_vma(struct mm_struct *mm, unsigned long slice)
 	return !slice_area_is_free(mm, start, end - start);
 }
 
-static struct slice_mask slice_mask_for_free(struct mm_struct *mm)
+static void slice_mask_for_free(struct mm_struct *mm, struct slice_mask *ret)
 {
-	struct slice_mask ret;
 	unsigned long i;
 
-	ret.low_slices = 0;
-	bitmap_zero(ret.high_slices, SLICE_NUM_HIGH);
+	ret->low_slices = 0;
+	bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
 
 	for (i = 0; i < SLICE_NUM_LOW; i++)
 		if (!slice_low_has_vma(mm, i))
-			ret.low_slices |= 1u << i;
+			ret->low_slices |= 1u << i;
 
 	if (mm->task_size <= SLICE_LOW_TOP)
-		return ret;
+		return;
 
 	for (i = 0; i < SLICE_NUM_HIGH; i++)
 		if (!slice_high_has_vma(mm, i))
-			__set_bit(i, ret.high_slices);
-
-	return ret;
+			__set_bit(i, ret->high_slices);
 }
 
-static struct slice_mask slice_mask_for_size(struct mm_struct *mm, int psize)
+static void slice_mask_for_size(struct mm_struct *mm, int psize, struct slice_mask *ret)
 {
 	unsigned char *hpsizes;
 	int index, mask_index;
-	struct slice_mask ret;
 	unsigned long i;
 	u64 lpsizes;
 
-	ret.low_slices = 0;
-	bitmap_zero(ret.high_slices, SLICE_NUM_HIGH);
+	ret->low_slices = 0;
+	bitmap_zero(ret->high_slices, SLICE_NUM_HIGH);
 
 	lpsizes = mm->context.low_slices_psize;
 	for (i = 0; i < SLICE_NUM_LOW; i++)
 		if (((lpsizes >> (i * 4)) & 0xf) == psize)
-			ret.low_slices |= 1u << i;
+			ret->low_slices |= 1u << i;
 
 	hpsizes = mm->context.high_slices_psize;
 	for (i = 0; i < SLICE_NUM_HIGH; i++) {
 		mask_index = i & 0x1;
 		index = i >> 1;
 		if (((hpsizes[index] >> (mask_index * 4)) & 0xf) == psize)
-			__set_bit(i, ret.high_slices);
+			__set_bit(i, ret->high_slices);
 	}
-
-	return ret;
 }
 
 static int slice_check_fit(struct slice_mask mask, struct slice_mask available)
@@ -460,7 +452,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	/* First make up a "good" mask of slices that have the right size
 	 * already
 	 */
-	good_mask = slice_mask_for_size(mm, psize);
+	slice_mask_for_size(mm, psize, &good_mask);
 	slice_print_mask(" good_mask", good_mask);
 
 	/*
@@ -485,7 +477,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 #ifdef CONFIG_PPC_64K_PAGES
 	/* If we support combo pages, we can allow 64k pages in 4k slices */
 	if (psize == MMU_PAGE_64K) {
-		compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K);
+		slice_mask_for_size(mm, MMU_PAGE_4K, &compat_mask);
 		if (fixed)
 			slice_or_mask(&good_mask, &compat_mask);
 	}
@@ -494,7 +486,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	/* First check hint if it's valid or if we have MAP_FIXED */
 	if (addr != 0 || fixed) {
 		/* Build a mask for the requested range */
-		mask = slice_range_to_mask(addr, len);
+		slice_range_to_mask(addr, len, &mask);
 		slice_print_mask(" mask", mask);
 
 		/* Check if we fit in the good mask. If we do, we just return,
@@ -521,7 +513,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	/* We don't fit in the good mask, check what other slices are
 	 * empty and thus can be converted
 	 */
-	potential_mask = slice_mask_for_free(mm);
+	slice_mask_for_free(mm, &potential_mask);
 	slice_or_mask(&potential_mask, &good_mask);
 	slice_print_mask(" potential", potential_mask);
 
@@ -564,7 +556,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	if (addr == -ENOMEM)
 		return -ENOMEM;
 
-	mask = slice_range_to_mask(addr, len);
+	slice_range_to_mask(addr, len, &mask);
 	slice_dbg(" found potential area at 0x%lx\n", addr);
 	slice_print_mask(" mask", mask);
 
@@ -696,9 +688,11 @@ void slice_set_user_psize(struct mm_struct *mm, unsigned int psize)
 void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
 			   unsigned long len, unsigned int psize)
 {
-	struct slice_mask mask = slice_range_to_mask(start, len);
+	struct slice_mask mask;
 
 	VM_BUG_ON(radix_enabled());
+
+	slice_range_to_mask(start, len, &mask);
 	slice_convert(mm, mask, psize);
 }
 
@@ -731,13 +725,13 @@ int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
 	if (radix_enabled())
 		return 0;
 
-	mask = slice_range_to_mask(addr, len);
-	available = slice_mask_for_size(mm, psize);
+	slice_range_to_mask(addr, len, &mask);
+	slice_mask_for_size(mm, psize, &available);
 #ifdef CONFIG_PPC_64K_PAGES
 	/* We need to account for 4k slices too */
 	if (psize == MMU_PAGE_64K) {
 		struct slice_mask compat_mask;
-		compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K);
+		slice_mask_for_size(mm, MMU_PAGE_4K, &compat_mask);
 		slice_or_mask(&available, &compat_mask);
 	}
 #endif
-- 
2.7.4

[PATCH V5 03/17] powerpc/mm: Move copy_mm_to_paca to paca.c

[Aneesh Kumar K.V]

We also update the function arg to struct mm_struct. Move this so that function
finds the definition of struct mm_struct. No functional change in this patch.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/paca.h | 18 +-----------------
 arch/powerpc/kernel/paca.c      | 19 +++++++++++++++++++
 arch/powerpc/mm/hash_utils_64.c |  4 ++--
 arch/powerpc/mm/slb.c           |  2 +-
 arch/powerpc/mm/slice.c         |  2 +-
 5 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 708c3e592eeb..f48c250339fd 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -206,23 +206,7 @@ struct paca_struct {
 #endif
 };
 
-#ifdef CONFIG_PPC_BOOK3S
-static inline void copy_mm_to_paca(mm_context_t *context)
-{
-	get_paca()->mm_ctx_id = context->id;
-#ifdef CONFIG_PPC_MM_SLICES
-	get_paca()->mm_ctx_low_slices_psize = context->low_slices_psize;
-	memcpy(&get_paca()->mm_ctx_high_slices_psize,
-	       &context->high_slices_psize, SLICE_ARRAY_SIZE);
-#else
-	get_paca()->mm_ctx_user_psize = context->user_psize;
-	get_paca()->mm_ctx_sllp = context->sllp;
-#endif
-}
-#else
-static inline void copy_mm_to_paca(mm_context_t *context){}
-#endif
-
+extern void copy_mm_to_paca(struct mm_struct *mm);
 extern struct paca_struct *paca;
 extern void initialise_paca(struct paca_struct *new_paca, int cpu);
 extern void setup_paca(struct paca_struct *new_paca);
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index dfc479df9634..e2cf745a4b94 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -245,3 +245,22 @@ void __init free_unused_pacas(void)
 
 	free_lppacas();
 }
+
+void copy_mm_to_paca(struct mm_struct *mm)
+{
+#ifdef CONFIG_PPC_BOOK3S
+	mm_context_t *context = &mm->context;
+
+	get_paca()->mm_ctx_id = context->id;
+#ifdef CONFIG_PPC_MM_SLICES
+	get_paca()->mm_ctx_low_slices_psize = context->low_slices_psize;
+	memcpy(&get_paca()->mm_ctx_high_slices_psize,
+	       &context->high_slices_psize, SLICE_ARRAY_SIZE);
+#else /* CONFIG_PPC_MM_SLICES */
+	get_paca()->mm_ctx_user_psize = context->user_psize;
+	get_paca()->mm_ctx_sllp = context->sllp;
+#endif
+#else /* CONFIG_PPC_BOOK3S */
+	return;
+#endif
+}
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index c554768b1fa2..1bbf572243f7 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -1120,7 +1120,7 @@ void demote_segment_4k(struct mm_struct *mm, unsigned long addr)
 	copro_flush_all_slbs(mm);
 	if ((get_paca_psize(addr) != MMU_PAGE_4K) && (current->mm == mm)) {
 
-		copy_mm_to_paca(&mm->context);
+		copy_mm_to_paca(mm);
 		slb_flush_and_rebolt();
 	}
 }
@@ -1192,7 +1192,7 @@ static void check_paca_psize(unsigned long ea, struct mm_struct *mm,
 {
 	if (user_region) {
 		if (psize != get_paca_psize(ea)) {
-			copy_mm_to_paca(&mm->context);
+			copy_mm_to_paca(mm);
 			slb_flush_and_rebolt();
 		}
 	} else if (get_paca()->vmalloc_sllp !=
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 5e01b2ece1d0..98ae810b8c21 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -229,7 +229,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 		asm volatile("slbie %0" : : "r" (slbie_data));
 
 	get_paca()->slb_cache_ptr = 0;
-	copy_mm_to_paca(&mm->context);
+	copy_mm_to_paca(mm);
 
 	/*
 	 * preload some userspace segments into the SLB.
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index 2396db6b3a05..b40b4111ca13 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -192,7 +192,7 @@ static void slice_flush_segments(void *parm)
 	if (mm != current->active_mm)
 		return;
 
-	copy_mm_to_paca(&current->active_mm->context);
+	copy_mm_to_paca(current->active_mm);
 
 	local_irq_save(flags);
 	slb_flush_and_rebolt();
-- 
2.7.4

[PATCH V5 04/17] powerpc/mm: Remove redundant TASK_SIZE_USER64 checks

[Aneesh Kumar K.V]

The check against VSID range is implied when we check task size against
hash and radix pgtable range[1], because we make sure page table range cannot
exceed vsid range.

[1] BUILD_BUG_ON(TASK_SIZE_USER64 > H_PGTABLE_RANGE);
BUILD_BUG_ON(TASK_SIZE_USER64 > RADIX_PGTABLE_RANGE);

The check for smaller task size is also removed here, because the follow up
patch will support a tasksize smaller than pgtable range.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/mm/init_64.c    | 4 ----
 arch/powerpc/mm/pgtable_64.c | 5 -----
 2 files changed, 9 deletions(-)

diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 9be992083d2a..8f6f2a173e47 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -71,10 +71,6 @@
 #if H_PGTABLE_RANGE > USER_VSID_RANGE
 #warning Limited user VSID range means pagetable space is wasted
 #endif
-
-#if (TASK_SIZE_USER64 < H_PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE)
-#warning TASK_SIZE is smaller than it needs to be.
-#endif
 #endif /* CONFIG_PPC_STD_MMU_64 */
 
 phys_addr_t memstart_addr = ~0;
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index db93cf747a03..3e0cfb6420dd 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -56,11 +56,6 @@
 
 #include "mmu_decl.h"
 
-#ifdef CONFIG_PPC_STD_MMU_64
-#if TASK_SIZE_USER64 > (1UL << (ESID_BITS + SID_SHIFT))
-#error TASK_SIZE_USER64 exceeds user VSID range
-#endif
-#endif
 
 #ifdef CONFIG_PPC_BOOK3S_64
 /*
-- 
2.7.4

[PATCH V5 05/17] powerpc/mm/slice: Move slice_mask struct definition to slice.c

[Aneesh Kumar K.V]

This structure definition need not be in a header since this is used only by
slice.c file. So move it to slice.c. This also allow us to use SLICE_NUM_HIGH
instead of 64.

I also switch the low_slices type to u64 from u16. This doesn't have an impact
on size of struct due to padding added with u16 type. This helps in using
bitmap printing function for printing slice mask.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/page_64.h | 11 -----------
 arch/powerpc/mm/slice.c            | 10 +++++++++-
 2 files changed, 9 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index bd55ff751938..c4d9654bd637 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -99,17 +99,6 @@ extern u64 ppc64_pft_size;
 #define GET_HIGH_SLICE_INDEX(addr)	((addr) >> SLICE_HIGH_SHIFT)
 
 #ifndef __ASSEMBLY__
-/*
- * One bit per slice. We have lower slices which cover 256MB segments
- * upto 4G range. That gets us 16 low slices. For the rest we track slices
- * in 1TB size.
- * 64 below is actually SLICE_NUM_HIGH to fixup complie errros
- */
-struct slice_mask {
-	u16 low_slices;
-	DECLARE_BITMAP(high_slices, 64);
-};
-
 struct mm_struct;
 
 extern unsigned long slice_get_unmapped_area(unsigned long addr,
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index b40b4111ca13..e1c42b54f5c5 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -37,7 +37,15 @@
 #include <asm/hugetlb.h>
 
 static DEFINE_SPINLOCK(slice_convert_lock);
-
+/*
+ * One bit per slice. We have lower slices which cover 256MB segments
+ * upto 4G range. That gets us 16 low slices. For the rest we track slices
+ * in 1TB size.
+ */
+struct slice_mask {
+	u64 low_slices;
+	DECLARE_BITMAP(high_slices, SLICE_NUM_HIGH);
+};
 
 #ifdef DEBUG
 int _slice_debug = 1;
-- 
2.7.4

[PATCH V5 06/17] powerpc/mm/slice: Update slice mask printing to use bitmap printing.

[Aneesh Kumar K.V]

We now get output like below which is much better.

[    0.935306]  good_mask low_slice: 0-15
[    0.935360]  good_mask high_slice: 0-511

Compared to

[    0.953414]  good_mask:1111111111111111 - 1111111111111.........

I also fixed an error with slice_dbg printing.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/mm/slice.c | 30 +++++++-----------------------
 1 file changed, 7 insertions(+), 23 deletions(-)

diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index e1c42b54f5c5..ee3cfc5d9bbc 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -52,29 +52,13 @@ int _slice_debug = 1;
 
 static void slice_print_mask(const char *label, struct slice_mask mask)
 {
-	char	*p, buf[SLICE_NUM_LOW + 3 + SLICE_NUM_HIGH + 1];
-	int	i;
-
 	if (!_slice_debug)
 		return;
-	p = buf;
-	for (i = 0; i < SLICE_NUM_LOW; i++)
-		*(p++) = (mask.low_slices & (1 << i)) ? '1' : '0';
-	*(p++) = ' ';
-	*(p++) = '-';
-	*(p++) = ' ';
-	for (i = 0; i < SLICE_NUM_HIGH; i++) {
-		if (test_bit(i, mask.high_slices))
-			*(p++) = '1';
-		else
-			*(p++) = '0';
-	}
-	*(p++) = 0;
-
-	printk(KERN_DEBUG "%s:%s\n", label, buf);
+	pr_devel("%s low_slice: %*pbl\n", label, (int)SLICE_NUM_LOW, &mask.low_slices);
+	pr_devel("%s high_slice: %*pbl\n", label, (int)SLICE_NUM_HIGH, mask.high_slices);
 }
 
-#define slice_dbg(fmt...) do { if (_slice_debug) pr_debug(fmt); } while(0)
+#define slice_dbg(fmt...) do { if (_slice_debug) pr_devel(fmt); } while (0)
 
 #else
 
@@ -243,8 +227,8 @@ static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psiz
 	}
 
 	slice_dbg(" lsps=%lx, hsps=%lx\n",
-		  mm->context.low_slices_psize,
-		  mm->context.high_slices_psize);
+		  (unsigned long)mm->context.low_slices_psize,
+		  (unsigned long)mm->context.high_slices_psize);
 
 	spin_unlock_irqrestore(&slice_convert_lock, flags);
 
@@ -686,8 +670,8 @@ void slice_set_user_psize(struct mm_struct *mm, unsigned int psize)
 
 
 	slice_dbg(" lsps=%lx, hsps=%lx\n",
-		  mm->context.low_slices_psize,
-		  mm->context.high_slices_psize);
+		  (unsigned long)mm->context.low_slices_psize,
+		  (unsigned long)mm->context.high_slices_psize);
 
  bail:
 	spin_unlock_irqrestore(&slice_convert_lock, flags);
-- 
2.7.4

[PATCH V5 07/17] powerpc/mm/hash: Move kernel context to the starting of context range

[Aneesh Kumar K.V]

With current kernel, we use the top 4 context for the kernel. Kernel VSIDs are built
using these top context values and effective segemnt ID. In the following patches,
we want to increase the max effective address to 512TB. We achieve that by
increasing the effective segments IDs there by increasing virtual address range.

We will be switching to a 68bit virtual address in the following patch. But for
platforms like  p4 and p5, which only support a 65 bit va, we want to limit the
virtual addrress to a 65 bit value. We do that by limiting the context bits to 16
instead of 19. That means we will have different max context values on different
platforms.

To make this simpler. we move the kernel context to the starting of the range.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/mmu-hash.h | 39 ++++++------
 arch/powerpc/include/asm/mmu_context.h        |  2 +-
 arch/powerpc/kvm/book3s_64_mmu_host.c         |  2 +-
 arch/powerpc/mm/hash_utils_64.c               |  5 --
 arch/powerpc/mm/mmu_context_book3s64.c        | 88 ++++++++++++++++++---------
 arch/powerpc/mm/slb_low.S                     | 20 ++----
 6 files changed, 84 insertions(+), 72 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index 52d8d1e4b772..37dbc9becaba 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -494,10 +494,10 @@ extern void slb_set_size(u16 size);
  * For user processes max context id is limited to ((1ul << 19) - 5)
  * for kernel space, we use the top 4 context ids to map address as below
  * NOTE: each context only support 64TB now.
- * 0x7fffc -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
- * 0x7fffd -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
- * 0x7fffe -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
- * 0x7ffff -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
+ * 0x00000 -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x00001 -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x00002 -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x00003 -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
  *
  * The proto-VSIDs are then scrambled into real VSIDs with the
  * multiplicative hash:
@@ -511,15 +511,9 @@ extern void slb_set_size(u16 size);
  * robust scattering in the hash table (at least based on some initial
  * results).
  *
- * We also consider VSID 0 special. We use VSID 0 for slb entries mapping
- * bad address. This enables us to consolidate bad address handling in
- * hash_page.
- *
  * We also need to avoid the last segment of the last context, because that
  * would give a protovsid of 0x1fffffffff. That will result in a VSID 0
- * because of the modulo operation in vsid scramble. But the vmemmap
- * (which is what uses region 0xf) will never be close to 64TB in size
- * (it's 56 bytes per page of system memory).
+ * because of the modulo operation in vsid scramble.
  */
 
 #define CONTEXT_BITS		19
@@ -532,12 +526,15 @@ extern void slb_set_size(u16 size);
 /*
  * 256MB segment
  * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments
- * available for user + kernel mapping. The top 4 contexts are used for
+ * available for user + kernel mapping. The bottom 4 contexts are used for
  * kernel mapping. Each segment contains 2^28 bytes. Each
- * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
- * (19 == 37 + 28 - 46).
+ * context maps 2^46 bytes (64TB).
+ *
+ * We also need to avoid the last segment of the last context, because that
+ * would give a protovsid of 0x1fffffffff. That will result in a VSID 0
+ * because of the modulo operation in vsid scramble.
  */
-#define MAX_USER_CONTEXT	((ASM_CONST(1) << CONTEXT_BITS) - 5)
+#define MAX_USER_CONTEXT	((ASM_CONST(1) << CONTEXT_BITS) - 2)
 
 /*
  * This should be computed such that protovosid * vsid_mulitplier
@@ -673,19 +670,19 @@ static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
  * This is only valid for addresses >= PAGE_OFFSET
  *
  * For kernel space, we use the top 4 context ids to map address as below
- * 0x7fffc -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
- * 0x7fffd -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
- * 0x7fffe -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
- * 0x7ffff -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
+ * 0x00000 -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x00001 -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x00002 -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x00003 -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
  */
 static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
 {
 	unsigned long context;
 
 	/*
-	 * kernel take the top 4 context from the available range
+	 * kernel take the first 4 context from the available range
 	 */
-	context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1;
+	context = (ea >> 60) - 0xc;
 	return get_vsid(context, ea, ssize);
 }
 
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index b9e3f0aca261..8fe1ba1808d3 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -51,7 +51,7 @@ static inline void switch_mmu_context(struct mm_struct *prev,
 	return switch_slb(tsk, next);
 }
 
-extern int __init_new_context(void);
+extern int hash__get_new_context(void);
 extern void __destroy_context(int context_id);
 static inline void mmu_context_init(void) { }
 #else
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index a587e8f4fd26..d6041101a5e2 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -390,7 +390,7 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
 	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
 	int err;
 
-	err = __init_new_context();
+	err = hash__get_new_context();
 	if (err < 0)
 		return -1;
 	vcpu3s->context_id[0] = err;
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 1bbf572243f7..6922a8d267cc 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -257,11 +257,6 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		unsigned long vpn  = hpt_vpn(vaddr, vsid, ssize);
 		unsigned long tprot = prot;
 
-		/*
-		 * If we hit a bad address return error.
-		 */
-		if (!vsid)
-			return -1;
 		/* Make kernel text executable */
 		if (overlaps_kernel_text(vaddr, vaddr + step))
 			tprot &= ~HPTE_R_N;
diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c
index 73bf6e14c3aa..a6450c7f9cf3 100644
--- a/arch/powerpc/mm/mmu_context_book3s64.c
+++ b/arch/powerpc/mm/mmu_context_book3s64.c
@@ -30,17 +30,19 @@
 static DEFINE_SPINLOCK(mmu_context_lock);
 static DEFINE_IDA(mmu_context_ida);
 
-int __init_new_context(void)
+int hash__get_new_context(void)
 {
-	int index;
-	int err;
+	int index, err;
 
 again:
 	if (!ida_pre_get(&mmu_context_ida, GFP_KERNEL))
 		return -ENOMEM;
 
 	spin_lock(&mmu_context_lock);
-	err = ida_get_new_above(&mmu_context_ida, 1, &index);
+	/*
+	 * 0 - 3 context is taken by kernel.
+	 */
+	err = ida_get_new_above(&mmu_context_ida, 4, &index);
 	spin_unlock(&mmu_context_lock);
 
 	if (err == -EAGAIN)
@@ -54,51 +56,79 @@ int __init_new_context(void)
 		spin_unlock(&mmu_context_lock);
 		return -ENOMEM;
 	}
+	return index;
+}
+EXPORT_SYMBOL_GPL(hash__get_new_context);
+
+static int hash__init_new_context(struct mm_struct *mm)
+{
+	int index;
 
+	index = hash__get_new_context();
+	if (index < 0)
+		return index;
+	/* The old code would re-promote on fork, we don't do that
+	 * when using slices as it could cause problem promoting slices
+	 * that have been forced down to 4K
+	 *
+	 * For book3s we have MMU_NO_CONTEXT set to be ~0. Hence check
+	 * explicitly against context.id == 0. This ensures that we
+	 * properly initialize context slice details for newly allocated
+	 * mm's (which will have id == 0) and don't alter context slice
+	 * inherited via fork (which will have id != 0).
+	 *
+	 * We should not be calling init_new_context() on init_mm. Hence a
+	 * check against 0 is ok.
+	 */
+	if (mm->context.id == 0)
+		slice_set_user_psize(mm, mmu_virtual_psize);
+	subpage_prot_init_new_context(mm);
 	return index;
 }
-EXPORT_SYMBOL_GPL(__init_new_context);
-static int radix__init_new_context(struct mm_struct *mm, int index)
+
+static int radix__init_new_context(struct mm_struct *mm)
 {
+	int index, err;
 	unsigned long rts_field;
 
+again:
+	if (!ida_pre_get(&mmu_context_ida, GFP_KERNEL))
+		return -ENOMEM;
+
+	spin_lock(&mmu_context_lock);
+	err = ida_get_new_above(&mmu_context_ida, 1, &index);
+	spin_unlock(&mmu_context_lock);
+
+	if (err == -EAGAIN)
+		goto again;
+	else if (err)
+		return err;
+
+	if (index > ((1UL << PRTB_SIZE_SHIFT) - 1)) {
+		spin_lock(&mmu_context_lock);
+		ida_remove(&mmu_context_ida, index);
+		spin_unlock(&mmu_context_lock);
+		return -ENOMEM;
+	}
 	/*
 	 * set the process table entry,
 	 */
 	rts_field = radix__get_tree_size();
 	process_tb[index].prtb0 = cpu_to_be64(rts_field | __pa(mm->pgd) | RADIX_PGD_INDEX_SIZE);
-	return 0;
+	return index;
 }
 
 int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
 	int index;
 
-	index = __init_new_context();
+	if (radix_enabled())
+		index = radix__init_new_context(mm);
+	else
+		index = hash__init_new_context(mm);
 	if (index < 0)
 		return index;
 
-	if (radix_enabled()) {
-		radix__init_new_context(mm, index);
-	} else {
-
-		/* The old code would re-promote on fork, we don't do that
-		 * when using slices as it could cause problem promoting slices
-		 * that have been forced down to 4K
-		 *
-		 * For book3s we have MMU_NO_CONTEXT set to be ~0. Hence check
-		 * explicitly against context.id == 0. This ensures that we
-		 * properly initialize context slice details for newly allocated
-		 * mm's (which will have id == 0) and don't alter context slice
-		 * inherited via fork (which will have id != 0).
-		 *
-		 * We should not be calling init_new_context() on init_mm. Hence a
-		 * check against 0 is ok.
-		 */
-		if (mm->context.id == 0)
-			slice_set_user_psize(mm, mmu_virtual_psize);
-		subpage_prot_init_new_context(mm);
-	}
 	mm->context.id = index;
 #ifdef CONFIG_PPC_ICSWX
 	mm->context.cop_lockp = kmalloc(sizeof(spinlock_t), GFP_KERNEL);
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index a85e06ea6c20..90154a4e5b9a 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -45,13 +45,6 @@ _GLOBAL(slb_allocate_realmode)
 	/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
 	blt	cr7,0f			/* user or kernel? */
 
-	/* kernel address: proto-VSID = ESID */
-	/* WARNING - MAGIC: we don't use the VSID 0xfffffffff, but
-	 * this code will generate the protoVSID 0xfffffffff for the
-	 * top segment.  That's ok, the scramble below will translate
-	 * it to VSID 0, which is reserved as a bad VSID - one which
-	 * will never have any pages in it.  */
-
 	/* Check if hitting the linear mapping or some other kernel space
 	*/
 	bne	cr7,1f
@@ -63,12 +56,10 @@ _GLOBAL(slb_allocate_realmode)
 slb_miss_kernel_load_linear:
 	li	r11,0
 	/*
-	 * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+	 * context = (ea >> 60) - 0xc
 	 * r9 = region id.
 	 */
-	addis	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
-	addi	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
-
+	subi	r9,r9,0xc
 
 BEGIN_FTR_SECTION
 	b	.Lslb_finish_load
@@ -77,9 +68,9 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 
 1:
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
-	/* Check virtual memmap region. To be patches at kernel boot */
 	cmpldi	cr0,r9,0xf
 	bne	1f
+/* Check virtual memmap region. To be patched at kernel boot */
 .globl slb_miss_kernel_load_vmemmap
 slb_miss_kernel_load_vmemmap:
 	li	r11,0
@@ -102,11 +93,10 @@ slb_miss_kernel_load_io:
 	li	r11,0
 6:
 	/*
-	 * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+	 * context = (ea >> 60) - 0xc
 	 * r9 = region id.
 	 */
-	addis	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
-	addi	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+	subi	r9,r9,0xc
 
 BEGIN_FTR_SECTION
 	b	.Lslb_finish_load
-- 
2.7.4

[PATCH V5 08/17] powerpc/mm/hash: Support 68 bit VA

[Aneesh Kumar K.V]

Inorder to support large effective address range (512TB), we want to increase
the virtual address bits to 68. But we do have platforms like p4 and p5 that can
only do 65 bit VA. We support those platforms by limiting context bits on them
to 16.

The protovsid -> vsid conversion is verified to work with both 65 and 68 bit
va values. I also documented the restrictions in a table format as part of code
comments.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/mmu-hash.h | 125 ++++++++++++++++----------
 arch/powerpc/include/asm/mmu.h                |  19 ++--
 arch/powerpc/kvm/book3s_64_mmu_host.c         |   8 +-
 arch/powerpc/mm/mmu_context_book3s64.c        |   8 +-
 arch/powerpc/mm/slb_low.S                     |  54 +++++++++--
 5 files changed, 150 insertions(+), 64 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index 37dbc9becaba..3897d30820b0 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -39,6 +39,7 @@
 
 /* Bits in the SLB VSID word */
 #define SLB_VSID_SHIFT		12
+#define SLB_VSID_SHIFT_256M	SLB_VSID_SHIFT
 #define SLB_VSID_SHIFT_1T	24
 #define SLB_VSID_SSIZE_SHIFT	62
 #define SLB_VSID_B		ASM_CONST(0xc000000000000000)
@@ -516,9 +517,19 @@ extern void slb_set_size(u16 size);
  * because of the modulo operation in vsid scramble.
  */
 
+/*
+ * Max Va bits we support as of now is 68 bits. We want 19 bit
+ * context ID.
+ * Restrictions:
+ * GPU has restrictions of not able to access beyond 128TB
+ * (47 bit effective address). We also cannot do more than 20bit PID.
+ * For p4 and p5 which can only do 65 bit VA, we restrict our CONTEXT_BITS
+ * to 16 bits (ie, we can only have 2^16 pids at the same time).
+ */
+#define VA_BITS			68
 #define CONTEXT_BITS		19
-#define ESID_BITS		18
-#define ESID_BITS_1T		6
+#define ESID_BITS		(VA_BITS - (SID_SHIFT + CONTEXT_BITS))
+#define ESID_BITS_1T		(VA_BITS - (SID_SHIFT_1T + CONTEXT_BITS))
 
 #define ESID_BITS_MASK		((1 << ESID_BITS) - 1)
 #define ESID_BITS_1T_MASK	((1 << ESID_BITS_1T) - 1)
@@ -528,62 +539,52 @@ extern void slb_set_size(u16 size);
  * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments
  * available for user + kernel mapping. The bottom 4 contexts are used for
  * kernel mapping. Each segment contains 2^28 bytes. Each
- * context maps 2^46 bytes (64TB).
+ * context maps 2^49 bytes (512TB).
  *
  * We also need to avoid the last segment of the last context, because that
  * would give a protovsid of 0x1fffffffff. That will result in a VSID 0
  * because of the modulo operation in vsid scramble.
  */
 #define MAX_USER_CONTEXT	((ASM_CONST(1) << CONTEXT_BITS) - 2)
+/*
+ * For platforms that support on 65bit VA we limit the context bits
+ */
+#define MAX_USER_CONTEXT_65BIT_VA ((ASM_CONST(1) << (65 - (SID_SHIFT + ESID_BITS))) - 2)
 
 /*
  * This should be computed such that protovosid * vsid_mulitplier
  * doesn't overflow 64 bits. It should also be co-prime to vsid_modulus
+ * We also need to make sure that number of bits in divisor is less
+ * than twice the number of protovsid bits for our modulus optmization to work.
+ * The below table shows the current values used.
+ *
+ * |-------+------------+----------------+------------+--------------|
+ * |       | Prime Bits | VSID_BITS_65VA | Total Bits | 2* VSID_BITS |
+ * |-------+------------+----------------+------------+--------------|
+ * | 1T    |         24 |             25 |         49 |           50 |
+ * |-------+------------+----------------+------------+--------------|
+ * | 256MB |         24 |             37 |         61 |           74 |
+ * |-------+------------+----------------+------------+--------------|
+ *
+ * |-------+------------+----------------+------------+--------------|
+ * |       | Prime Bits | VSID_BITS_68VA | Total Bits | 2* VSID_BITS |
+ * |-------+------------+----------------+------------+--------------|
+ * | 1T    |         24 |             28 |         52 |           56 |
+ * |-------+------------+----------------+------------+--------------|
+ * | 256MB |         24 |             40 |         64 |           80 |
+ * |-------+------------+----------------+------------+--------------|
+ *
  */
 #define VSID_MULTIPLIER_256M	ASM_CONST(12538073)	/* 24-bit prime */
-#define VSID_BITS_256M		(CONTEXT_BITS + ESID_BITS)
-#define VSID_MODULUS_256M	((1UL<<VSID_BITS_256M)-1)
+#define VSID_BITS_256M		(VA_BITS - SID_SHIFT)
+#define VSID_BITS_65_256M	(65 - SID_SHIFT)
 
 #define VSID_MULTIPLIER_1T	ASM_CONST(12538073)	/* 24-bit prime */
-#define VSID_BITS_1T		(CONTEXT_BITS + ESID_BITS_1T)
-#define VSID_MODULUS_1T		((1UL<<VSID_BITS_1T)-1)
-
+#define VSID_BITS_1T		(VA_BITS - SID_SHIFT_1T)
+#define VSID_BITS_65_1T		(65 - SID_SHIFT_1T)
 
 #define USER_VSID_RANGE	(1UL << (ESID_BITS + SID_SHIFT))
 
-/*
- * This macro generates asm code to compute the VSID scramble
- * function.  Used in slb_allocate() and do_stab_bolted.  The function
- * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
- *
- *	rt = register containing the proto-VSID and into which the
- *		VSID will be stored
- *	rx = scratch register (clobbered)
- *
- * 	- rt and rx must be different registers
- * 	- The answer will end up in the low VSID_BITS bits of rt.  The higher
- * 	  bits may contain other garbage, so you may need to mask the
- * 	  result.
- */
-#define ASM_VSID_SCRAMBLE(rt, rx, size)					\
-	lis	rx,VSID_MULTIPLIER_##size@h;				\
-	ori	rx,rx,VSID_MULTIPLIER_##size@l;				\
-	mulld	rt,rt,rx;		/* rt = rt * MULTIPLIER */	\
-									\
-	srdi	rx,rt,VSID_BITS_##size;					\
-	clrldi	rt,rt,(64-VSID_BITS_##size);				\
-	add	rt,rt,rx;		/* add high and low bits */	\
-	/* NOTE: explanation based on VSID_BITS_##size = 36		\
-	 * Now, r3 == VSID (mod 2^36-1), and lies between 0 and		\
-	 * 2^36-1+2^28-1.  That in particular means that if r3 >=	\
-	 * 2^36-1, then r3+1 has the 2^36 bit set.  So, if r3+1 has	\
-	 * the bit clear, r3 already has the answer we want, if it	\
-	 * doesn't, the answer is the low 36 bits of r3+1.  So in all	\
-	 * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\
-	addi	rx,rt,1;						\
-	srdi	rx,rx,VSID_BITS_##size;	/* extract 2^VSID_BITS bit */	\
-	add	rt,rt,rx
-
 /* 4 bits per slice and we have one slice per 1TB */
 #define SLICE_ARRAY_SIZE  (H_PGTABLE_RANGE >> 41)
 
@@ -631,7 +632,7 @@ static inline void subpage_prot_init_new_context(struct mm_struct *mm) { }
 #define vsid_scramble(protovsid, size) \
 	((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size))
 
-#else /* 1 */
+/* simplified form avoiding mod operation */
 #define vsid_scramble(protovsid, size) \
 	({								 \
 		unsigned long x;					 \
@@ -639,6 +640,21 @@ static inline void subpage_prot_init_new_context(struct mm_struct *mm) { }
 		x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \
 		(x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \
 	})
+
+#else /* 1 */
+static inline unsigned long vsid_scramble(unsigned long protovsid,
+				  unsigned long vsid_multiplier, int vsid_bits)
+{
+	unsigned long vsid;
+	unsigned long vsid_modulus = ((1UL << vsid_bits) - 1);
+	/*
+	 * We have same multipler for both 256 and 1T segements now
+	 */
+	vsid = protovsid * vsid_multiplier;
+	vsid = (vsid >> vsid_bits) + (vsid & vsid_modulus);
+	return (vsid + ((vsid + 1) >> vsid_bits)) & vsid_modulus;
+}
+
 #endif /* 1 */
 
 /* Returns the segment size indicator for a user address */
@@ -653,17 +669,32 @@ static inline int user_segment_size(unsigned long addr)
 static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
 				     int ssize)
 {
+	unsigned long va_bits = VA_BITS;
+	unsigned long vsid_bits;
+	unsigned long protovsid;
+
 	/*
 	 * Bad address. We return VSID 0 for that
 	 */
 	if ((ea & ~REGION_MASK) >= H_PGTABLE_RANGE)
 		return 0;
 
-	if (ssize == MMU_SEGSIZE_256M)
-		return vsid_scramble((context << ESID_BITS)
-				     | ((ea >> SID_SHIFT) & ESID_BITS_MASK), 256M);
-	return vsid_scramble((context << ESID_BITS_1T)
-			     | ((ea >> SID_SHIFT_1T) & ESID_BITS_1T_MASK), 1T);
+	if (!mmu_has_feature(MMU_FTR_68_BIT_VA))
+		va_bits = 65;
+
+	if (ssize == MMU_SEGSIZE_256M) {
+		vsid_bits = va_bits - SID_SHIFT;
+		protovsid = (context << ESID_BITS) |
+			((ea >> SID_SHIFT) & ESID_BITS_MASK);
+		return vsid_scramble(protovsid,
+				     VSID_MULTIPLIER_256M, vsid_bits);
+	}
+	/* 1T segment */
+	vsid_bits = va_bits - SID_SHIFT_1T;
+	protovsid = (context << ESID_BITS_1T) |
+		((ea >> SID_SHIFT_1T) & ESID_BITS_1T_MASK);
+	return vsid_scramble(protovsid,
+			     VSID_MULTIPLIER_1T, vsid_bits);
 }
 
 /*
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 065e762fae85..78260409dc9c 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -29,6 +29,10 @@
  */
 
 /*
+ * Support for 68 bit VA space. We added that from ISA 2.05
+ */
+#define MMU_FTR_68_BIT_VA		ASM_CONST(0x00002000)
+/*
  * Kernel read only support.
  * We added the ppp value 0b110 in ISA 2.04.
  */
@@ -109,10 +113,10 @@
 #define MMU_FTRS_POWER4		MMU_FTRS_DEFAULT_HPTE_ARCH_V2
 #define MMU_FTRS_PPC970		MMU_FTRS_POWER4 | MMU_FTR_TLBIE_CROP_VA
 #define MMU_FTRS_POWER5		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
-#define MMU_FTRS_POWER6		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE | MMU_FTR_KERNEL_RO
-#define MMU_FTRS_POWER7		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE | MMU_FTR_KERNEL_RO
-#define MMU_FTRS_POWER8		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE | MMU_FTR_KERNEL_RO
-#define MMU_FTRS_POWER9		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE | MMU_FTR_KERNEL_RO
+#define MMU_FTRS_POWER6		MMU_FTRS_POWER5 | MMU_FTR_KERNEL_RO | MMU_FTR_68_BIT_VA
+#define MMU_FTRS_POWER7		MMU_FTRS_POWER6
+#define MMU_FTRS_POWER8		MMU_FTRS_POWER6
+#define MMU_FTRS_POWER9		MMU_FTRS_POWER6
 #define MMU_FTRS_CELL		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
 				MMU_FTR_CI_LARGE_PAGE
 #define MMU_FTRS_PA6T		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
@@ -136,7 +140,7 @@ enum {
 		MMU_FTR_NO_SLBIE_B | MMU_FTR_16M_PAGE | MMU_FTR_TLBIEL |
 		MMU_FTR_LOCKLESS_TLBIE | MMU_FTR_CI_LARGE_PAGE |
 		MMU_FTR_1T_SEGMENT | MMU_FTR_TLBIE_CROP_VA |
-		MMU_FTR_KERNEL_RO |
+		MMU_FTR_KERNEL_RO | MMU_FTR_68_BIT_VA |
 #ifdef CONFIG_PPC_RADIX_MMU
 		MMU_FTR_TYPE_RADIX |
 #endif
@@ -290,7 +294,10 @@ static inline bool early_radix_enabled(void)
 #define MMU_PAGE_16G	14
 #define MMU_PAGE_64G	15
 
-/* N.B. we need to change the type of hpte_page_sizes if this gets to be > 16 */
+/*
+ * N.B. we need to change the type of hpte_page_sizes if this gets to be > 16
+ * Also we need to change he type of mm_context.low/high_slices_psize.
+ */
 #define MMU_PAGE_COUNT	16
 
 #ifdef CONFIG_PPC_BOOK3S_64
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index d6041101a5e2..bed699ab7654 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -229,6 +229,7 @@ void kvmppc_mmu_unmap_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
 
 static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid)
 {
+	unsigned long vsid_bits = VSID_BITS_65_256M;
 	struct kvmppc_sid_map *map;
 	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
 	u16 sid_map_mask;
@@ -257,7 +258,12 @@ static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid)
 		kvmppc_mmu_pte_flush(vcpu, 0, 0);
 		kvmppc_mmu_flush_segments(vcpu);
 	}
-	map->host_vsid = vsid_scramble(vcpu_book3s->proto_vsid_next++, 256M);
+
+	if (mmu_has_feature(MMU_FTR_68_BIT_VA))
+		vsid_bits = VSID_BITS_256M;
+
+	map->host_vsid = vsid_scramble(vcpu_book3s->proto_vsid_next++,
+				       VSID_MULTIPLIER_256M, vsid_bits);
 
 	map->guest_vsid = gvsid;
 	map->valid = true;
diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c
index a6450c7f9cf3..e6a5bcbf8abe 100644
--- a/arch/powerpc/mm/mmu_context_book3s64.c
+++ b/arch/powerpc/mm/mmu_context_book3s64.c
@@ -33,6 +33,12 @@ static DEFINE_IDA(mmu_context_ida);
 int hash__get_new_context(void)
 {
 	int index, err;
+	unsigned long max_user_context;
+
+	if (mmu_has_feature(MMU_FTR_68_BIT_VA))
+		max_user_context = MAX_USER_CONTEXT;
+	else
+		max_user_context = MAX_USER_CONTEXT_65BIT_VA;
 
 again:
 	if (!ida_pre_get(&mmu_context_ida, GFP_KERNEL))
@@ -50,7 +56,7 @@ int hash__get_new_context(void)
 	else if (err)
 		return err;
 
-	if (index > MAX_USER_CONTEXT) {
+	if (index > max_user_context) {
 		spin_lock(&mmu_context_lock);
 		ida_remove(&mmu_context_ida, index);
 		spin_unlock(&mmu_context_lock);
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 90154a4e5b9a..35e91e89640f 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -23,6 +23,48 @@
 #include <asm/pgtable.h>
 #include <asm/firmware.h>
 
+/*
+ * This macro generates asm code to compute the VSID scramble
+ * function.  Used in slb_allocate() and do_stab_bolted.  The function
+ * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
+ *
+ *	rt = register containing the proto-VSID and into which the
+ *		VSID will be stored
+ *	rx = scratch register (clobbered)
+ *	rf = flags
+ *
+ *	- rt and rx must be different registers
+ *	- The answer will end up in the low VSID_BITS bits of rt.  The higher
+ *	  bits may contain other garbage, so you may need to mask the
+ *	  result.
+ */
+#define ASM_VSID_SCRAMBLE(rt, rx, rf, size)				\
+	lis	rx,VSID_MULTIPLIER_##size@h;				\
+	ori	rx,rx,VSID_MULTIPLIER_##size@l;				\
+	mulld	rt,rt,rx;		/* rt = rt * MULTIPLIER */	\
+/*									\
+ * powermac get slb fault before feature fixup, so make 65 bit part     \
+ * the default part of feature fixup					\
+ */									\
+BEGIN_MMU_FTR_SECTION							\
+	srdi	rx,rt,VSID_BITS_65_##size;				\
+	clrldi	rt,rt,(64-VSID_BITS_65_##size);				\
+	add	rt,rt,rx;						\
+	addi	rx,rt,1;						\
+	srdi	rx,rx,VSID_BITS_65_##size;				\
+	add	rt,rt,rx;						\
+	rldimi	rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_65_##size)); \
+MMU_FTR_SECTION_ELSE							\
+	srdi	rx,rt,VSID_BITS_##size;					\
+	clrldi	rt,rt,(64-VSID_BITS_##size);				\
+	add	rt,rt,rx;		/* add high and low bits */	\
+	addi	rx,rt,1;						\
+	srdi	rx,rx,VSID_BITS_##size;	/* extract 2^VSID_BITS bit */	\
+	add	rt,rt,rx;						\
+	rldimi	rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_##size)); \
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_68_BIT_VA)
+
+
 /* void slb_allocate_realmode(unsigned long ea);
  *
  * Create an SLB entry for the given EA (user or kernel).
@@ -179,13 +221,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
  */
 .Lslb_finish_load:
 	rldimi  r10,r9,ESID_BITS,0
-	ASM_VSID_SCRAMBLE(r10,r9,256M)
-	/*
-	 * bits above VSID_BITS_256M need to be ignored from r10
-	 * also combine VSID and flags
-	 */
-	rldimi	r11,r10,SLB_VSID_SHIFT,(64 - (SLB_VSID_SHIFT + VSID_BITS_256M))
-
+	ASM_VSID_SCRAMBLE(r10,r9,r11,256M)
 	/* r3 = EA, r11 = VSID data */
 	/*
 	 * Find a slot, round robin. Previously we tried to find a
@@ -249,12 +285,12 @@ slb_compare_rr_to_size:
 .Lslb_finish_load_1T:
 	srdi	r10,r10,(SID_SHIFT_1T - SID_SHIFT)	/* get 1T ESID */
 	rldimi  r10,r9,ESID_BITS_1T,0
-	ASM_VSID_SCRAMBLE(r10,r9,1T)
+	ASM_VSID_SCRAMBLE(r10,r9,r11,1T)
 	/*
 	 * bits above VSID_BITS_1T need to be ignored from r10
 	 * also combine VSID and flags
 	 */
-	rldimi	r11,r10,SLB_VSID_SHIFT_1T,(64 - (SLB_VSID_SHIFT_1T + VSID_BITS_1T))
+
 	li	r10,MMU_SEGSIZE_1T
 	rldimi	r11,r10,SLB_VSID_SSIZE_SHIFT,0	/* insert segment size */
 
-- 
2.7.4

[PATCH V5 09/17] powerpc/mm/hash: VSID 0 is no more an invalid VSID

[Aneesh Kumar K.V]

This is now used by linear mapped region of the kernel. User space still
should not see a VSID 0. But having that VSID check confuse the reader.
Remove the same and convert the error checking to be based on addr value

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/mmu-hash.h |  6 ------
 arch/powerpc/mm/hash_utils_64.c               | 19 +++++++------------
 arch/powerpc/mm/pgtable-hash64.c              |  1 -
 arch/powerpc/mm/tlb_hash64.c                  |  1 -
 4 files changed, 7 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index 3897d30820b0..078d7bf93a69 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -673,12 +673,6 @@ static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
 	unsigned long vsid_bits;
 	unsigned long protovsid;
 
-	/*
-	 * Bad address. We return VSID 0 for that
-	 */
-	if ((ea & ~REGION_MASK) >= H_PGTABLE_RANGE)
-		return 0;
-
 	if (!mmu_has_feature(MMU_FTR_68_BIT_VA))
 		va_bits = 65;
 
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 6922a8d267cc..04523052ad8e 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -1222,6 +1222,13 @@ int hash_page_mm(struct mm_struct *mm, unsigned long ea,
 		ea, access, trap);
 	trace_hash_fault(ea, access, trap);
 
+	/* Bad address. */
+	if ((ea & ~REGION_MASK) >= H_PGTABLE_RANGE) {
+		DBG_LOW("Bad address!\n");
+		rc = 1;
+		goto bail;
+	}
+
 	/* Get region & vsid */
  	switch (REGION_ID(ea)) {
 	case USER_REGION_ID:
@@ -1252,12 +1259,6 @@ int hash_page_mm(struct mm_struct *mm, unsigned long ea,
 	}
 	DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);
 
-	/* Bad address. */
-	if (!vsid) {
-		DBG_LOW("Bad address!\n");
-		rc = 1;
-		goto bail;
-	}
 	/* Get pgdir */
 	pgdir = mm->pgd;
 	if (pgdir == NULL) {
@@ -1500,8 +1501,6 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	/* Get VSID */
 	ssize = user_segment_size(ea);
 	vsid = get_vsid(mm->context.id, ea, ssize);
-	if (!vsid)
-		return;
 	/*
 	 * Hash doesn't like irqs. Walking linux page table with irq disabled
 	 * saves us from holding multiple locks.
@@ -1746,10 +1745,6 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
 
 	hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
 
-	/* Don't create HPTE entries for bad address */
-	if (!vsid)
-		return;
-
 	ret = hpte_insert_repeating(hash, vpn, __pa(vaddr), mode,
 				    HPTE_V_BOLTED,
 				    mmu_linear_psize, mmu_kernel_ssize);
diff --git a/arch/powerpc/mm/pgtable-hash64.c b/arch/powerpc/mm/pgtable-hash64.c
index 8b85a14b08ea..ddfeb141af29 100644
--- a/arch/powerpc/mm/pgtable-hash64.c
+++ b/arch/powerpc/mm/pgtable-hash64.c
@@ -263,7 +263,6 @@ void hpte_do_hugepage_flush(struct mm_struct *mm, unsigned long addr,
 	if (!is_kernel_addr(addr)) {
 		ssize = user_segment_size(addr);
 		vsid = get_vsid(mm->context.id, addr, ssize);
-		WARN_ON(vsid == 0);
 	} else {
 		vsid = get_kernel_vsid(addr, mmu_kernel_ssize);
 		ssize = mmu_kernel_ssize;
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 4517aa43a8b1..d8fa336bf05d 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -87,7 +87,6 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 		vsid = get_kernel_vsid(addr, mmu_kernel_ssize);
 		ssize = mmu_kernel_ssize;
 	}
-	WARN_ON(vsid == 0);
 	vpn = hpt_vpn(addr, vsid, ssize);
 	rpte = __real_pte(__pte(pte), ptep);
 
-- 
2.7.4

[PATCH V5 10/17] powerpc/mm/hash: Convert mask to unsigned long

[Aneesh Kumar K.V]

This doesn't have any functional change. But helps in avoiding mistakes
in case the shift bit changes

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/mmu-hash.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index 078d7bf93a69..73f34a98ce99 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -409,7 +409,7 @@ static inline unsigned long hpt_vpn(unsigned long ea,
 static inline unsigned long hpt_hash(unsigned long vpn,
 				     unsigned int shift, int ssize)
 {
-	int mask;
+	unsigned long mask;
 	unsigned long hash, vsid;
 
 	/* VPN_SHIFT can be atmost 12 */
-- 
2.7.4

[PATCH V5 11/17] powerpc/mm/hash: Increase VA range to 128TB

[Aneesh Kumar K.V]

We update the hash linux page table layout such that we can support 512TB. But
we limit the TASK_SIZE to 128TB. We can switch to 128TB by default without
conditional because that is the max virtual address supported by other
architectures. We will later add a mechanism to on-demand increase the
application's effective address range to 512TB.

Having the page table layout changed to accommodate 512TB  makes testing large
memory configuration easier with less code changes to kernel

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/hash-4k.h  |  2 +-
 arch/powerpc/include/asm/book3s/64/hash-64k.h |  2 +-
 arch/powerpc/include/asm/processor.h          | 22 ++++++++++++++++++----
 3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
index 0c4e470571ca..b4b5e6b671ca 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@@ -8,7 +8,7 @@
 #define H_PTE_INDEX_SIZE  9
 #define H_PMD_INDEX_SIZE  7
 #define H_PUD_INDEX_SIZE  9
-#define H_PGD_INDEX_SIZE  9
+#define H_PGD_INDEX_SIZE  12
 
 #ifndef __ASSEMBLY__
 #define H_PTE_TABLE_SIZE	(sizeof(pte_t) << H_PTE_INDEX_SIZE)
diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
index 7be54f9590a3..214219dff87c 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -4,7 +4,7 @@
 #define H_PTE_INDEX_SIZE  8
 #define H_PMD_INDEX_SIZE  5
 #define H_PUD_INDEX_SIZE  5
-#define H_PGD_INDEX_SIZE  12
+#define H_PGD_INDEX_SIZE  15
 
 /*
  * 64k aligned address free up few of the lower bits of RPN for us
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index e0fecbcea2a2..146c3a91d89f 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -102,11 +102,25 @@ void release_thread(struct task_struct *);
 #endif
 
 #ifdef CONFIG_PPC64
-/* 64-bit user address space is 46-bits (64TB user VM) */
-#define TASK_SIZE_USER64 (0x0000400000000000UL)
+/*
+ * 64-bit user address space can have multiple limits
+ * For now supported values are:
+ */
+#define TASK_SIZE_64TB  (0x0000400000000000UL)
+#define TASK_SIZE_128TB (0x0000800000000000UL)
+#define TASK_SIZE_512TB (0x0002000000000000UL)
 
-/* 
- * 32-bit user address space is 4GB - 1 page 
+#ifdef CONFIG_PPC_BOOK3S_64
+/*
+ * MAx value currently used:
+ */
+#define TASK_SIZE_USER64 TASK_SIZE_128TB
+#else
+#define TASK_SIZE_USER64 TASK_SIZE_64TB
+#endif
+
+/*
+ * 32-bit user address space is 4GB - 1 page
  * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT
  */
 #define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE))
-- 
2.7.4

[PATCH V5 12/17] powerpc/mm/slice: Use mm task_size as max value of slice index

[Aneesh Kumar K.V]

In the followup patch, we will increase the slice array size to handle 512TB
range, but will limit the task size to 128TB. Avoid doing uncessary computation
and avoid doing slice mask related operation above task_size.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/mmu-hash.h |  3 ++-
 arch/powerpc/kernel/paca.c                    |  3 ++-
 arch/powerpc/kernel/setup-common.c            |  9 +++++++++
 arch/powerpc/mm/mmu_context_book3s64.c        |  8 ++++++++
 arch/powerpc/mm/slice.c                       | 22 ++++++++++++----------
 5 files changed, 33 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index 73f34a98ce99..c99ea6bbd82c 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -586,7 +586,8 @@ extern void slb_set_size(u16 size);
 #define USER_VSID_RANGE	(1UL << (ESID_BITS + SID_SHIFT))
 
 /* 4 bits per slice and we have one slice per 1TB */
-#define SLICE_ARRAY_SIZE  (H_PGTABLE_RANGE >> 41)
+#define SLICE_ARRAY_SIZE	(H_PGTABLE_RANGE >> 41)
+#define TASK_SLICE_ARRAY_SZ(x)	((x)->task_size >> 41)
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index e2cf745a4b94..bffdbd6d6774 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -253,9 +253,10 @@ void copy_mm_to_paca(struct mm_struct *mm)
 
 	get_paca()->mm_ctx_id = context->id;
 #ifdef CONFIG_PPC_MM_SLICES
+	VM_BUG_ON(!mm->task_size);
 	get_paca()->mm_ctx_low_slices_psize = context->low_slices_psize;
 	memcpy(&get_paca()->mm_ctx_high_slices_psize,
-	       &context->high_slices_psize, SLICE_ARRAY_SIZE);
+	       &context->high_slices_psize, TASK_SLICE_ARRAY_SZ(mm));
 #else /* CONFIG_PPC_MM_SLICES */
 	get_paca()->mm_ctx_user_psize = context->user_psize;
 	get_paca()->mm_ctx_sllp = context->sllp;
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 4697da895133..aaf1e2befbcb 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -920,6 +920,15 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_code = (unsigned long) _etext;
 	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = klimit;
+
+#ifdef CONFIG_PPC_MM_SLICES
+#ifdef CONFIG_PPC64
+	init_mm.task_size = TASK_SIZE_USER64;
+#else
+#error	"task_size not initialized."
+#endif
+#endif
+
 #ifdef CONFIG_PPC_64K_PAGES
 	init_mm.context.pte_frag = NULL;
 #endif
diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c
index e6a5bcbf8abe..9ab6cd2923be 100644
--- a/arch/powerpc/mm/mmu_context_book3s64.c
+++ b/arch/powerpc/mm/mmu_context_book3s64.c
@@ -86,6 +86,14 @@ static int hash__init_new_context(struct mm_struct *mm)
 	 * We should not be calling init_new_context() on init_mm. Hence a
 	 * check against 0 is ok.
 	 */
+#ifdef CONFIG_PPC_MM_SLICES
+	/*
+	 * We do switch_slb early in fork, even before we setup the mm->task_size.
+	 * Default to max task size so that we copy the default values to paca
+	 * which will help us to handle slb miss early.
+	 */
+	mm->task_size = TASK_SIZE_USER64;
+#endif
 	if (mm->context.id == 0)
 		slice_set_user_psize(mm, mmu_virtual_psize);
 	subpage_prot_init_new_context(mm);
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index ee3cfc5d9bbc..217638846053 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -136,7 +136,7 @@ static void slice_mask_for_free(struct mm_struct *mm, struct slice_mask *ret)
 	if (mm->task_size <= SLICE_LOW_TOP)
 		return;
 
-	for (i = 0; i < SLICE_NUM_HIGH; i++)
+	for (i = 0; i < GET_HIGH_SLICE_INDEX(mm->task_size); i++)
 		if (!slice_high_has_vma(mm, i))
 			__set_bit(i, ret->high_slices);
 }
@@ -157,7 +157,7 @@ static void slice_mask_for_size(struct mm_struct *mm, int psize, struct slice_ma
 			ret->low_slices |= 1u << i;
 
 	hpsizes = mm->context.high_slices_psize;
-	for (i = 0; i < SLICE_NUM_HIGH; i++) {
+	for (i = 0; i < GET_HIGH_SLICE_INDEX(mm->task_size); i++) {
 		mask_index = i & 0x1;
 		index = i >> 1;
 		if (((hpsizes[index] >> (mask_index * 4)) & 0xf) == psize)
@@ -165,15 +165,17 @@ static void slice_mask_for_size(struct mm_struct *mm, int psize, struct slice_ma
 	}
 }
 
-static int slice_check_fit(struct slice_mask mask, struct slice_mask available)
+static int slice_check_fit(struct mm_struct *mm,
+			   struct slice_mask mask, struct slice_mask available)
 {
 	DECLARE_BITMAP(result, SLICE_NUM_HIGH);
+	unsigned long slice_count = GET_HIGH_SLICE_INDEX(mm->task_size);
 
 	bitmap_and(result, mask.high_slices,
-		   available.high_slices, SLICE_NUM_HIGH);
+		   available.high_slices, slice_count);
 
 	return (mask.low_slices & available.low_slices) == mask.low_slices &&
-		bitmap_equal(result, mask.high_slices, SLICE_NUM_HIGH);
+		bitmap_equal(result, mask.high_slices, slice_count);
 }
 
 static void slice_flush_segments(void *parm)
@@ -217,7 +219,7 @@ static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psiz
 	mm->context.low_slices_psize = lpsizes;
 
 	hpsizes = mm->context.high_slices_psize;
-	for (i = 0; i < SLICE_NUM_HIGH; i++) {
+	for (i = 0; i < GET_HIGH_SLICE_INDEX(mm->task_size); i++) {
 		mask_index = i & 0x1;
 		index = i >> 1;
 		if (test_bit(i, mask.high_slices))
@@ -484,7 +486,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 		/* Check if we fit in the good mask. If we do, we just return,
 		 * nothing else to do
 		 */
-		if (slice_check_fit(mask, good_mask)) {
+		if (slice_check_fit(mm, mask, good_mask)) {
 			slice_dbg(" fits good !\n");
 			return addr;
 		}
@@ -509,7 +511,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	slice_or_mask(&potential_mask, &good_mask);
 	slice_print_mask(" potential", potential_mask);
 
-	if ((addr != 0 || fixed) && slice_check_fit(mask, potential_mask)) {
+	if ((addr != 0 || fixed) && slice_check_fit(mm, mask, potential_mask)) {
 		slice_dbg(" fits potential !\n");
 		goto convert;
 	}
@@ -657,7 +659,7 @@ void slice_set_user_psize(struct mm_struct *mm, unsigned int psize)
 	mm->context.low_slices_psize = lpsizes;
 
 	hpsizes = mm->context.high_slices_psize;
-	for (i = 0; i < SLICE_NUM_HIGH; i++) {
+	for (i = 0; i < GET_HIGH_SLICE_INDEX(mm->task_size); i++) {
 		mask_index = i & 0x1;
 		index = i >> 1;
 		if (((hpsizes[index] >> (mask_index * 4)) & 0xf) == old_psize)
@@ -734,6 +736,6 @@ int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
 	slice_print_mask(" mask", mask);
 	slice_print_mask(" available", available);
 #endif
-	return !slice_check_fit(mask, available);
+	return !slice_check_fit(mm, mask, available);
 }
 #endif
-- 
2.7.4

[PATCH V5 13/17] powerpc/mm/hash: Store task size in PACA

[Aneesh Kumar K.V]

We optmize the slice page size array copy to paca by copying only the
range based on task size. This will require us to not look at page size
array beyond task size in PACA on slb fault. To enable that copy task size
to paca which will be used during slb fault.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/paca.h   | 4 +++-
 arch/powerpc/kernel/asm-offsets.c | 4 ++++
 arch/powerpc/kernel/paca.c        | 1 +
 arch/powerpc/mm/slb_low.S         | 8 +++++++-
 4 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index f48c250339fd..25f4a1c14759 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -144,7 +144,9 @@ struct paca_struct {
 	u16 mm_ctx_sllp;
 #endif
 #endif
-
+#ifdef CONFIG_PPC_STD_MMU_64
+	u64 task_size;
+#endif
 	/*
 	 * then miscellaneous read-write fields
 	 */
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 4367e7df51a1..a60ef1d976ab 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -189,6 +189,10 @@ int main(void)
 #endif /* CONFIG_PPC_MM_SLICES */
 #endif
 
+#ifdef CONFIG_PPC_STD_MMU_64
+	DEFINE(PACATASKSIZE, offsetof(struct paca_struct, task_size));
+#endif
+
 #ifdef CONFIG_PPC_BOOK3E
 	OFFSET(PACAPGD, paca_struct, pgd);
 	OFFSET(PACA_KERNELPGD, paca_struct, kernel_pgd);
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index bffdbd6d6774..50b60e23d07f 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -254,6 +254,7 @@ void copy_mm_to_paca(struct mm_struct *mm)
 	get_paca()->mm_ctx_id = context->id;
 #ifdef CONFIG_PPC_MM_SLICES
 	VM_BUG_ON(!mm->task_size);
+	get_paca()->task_size = mm->task_size;
 	get_paca()->mm_ctx_low_slices_psize = context->low_slices_psize;
 	memcpy(&get_paca()->mm_ctx_high_slices_psize,
 	       &context->high_slices_psize, TASK_SLICE_ARRAY_SZ(mm));
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 35e91e89640f..b09e7748856f 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -149,7 +149,13 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	 * For userspace addresses, make sure this is region 0.
 	 */
 	cmpdi	r9, 0
-	bne	8f
+	bne-	8f
+        /*
+         * user space make sure we are within the allowed limit
+	 */
+	ld	r11,PACATASKSIZE(r13)
+	cmpld	r3,r11
+	bge-	8f
 
 	/* when using slices, we extract the psize off the slice bitmaps
 	 * and then we need to get the sllp encoding off the mmu_psize_defs
-- 
2.7.4

[PATCH V5 14/17] powerpc/mm/hash: Skip using reserved virtual address range

[Aneesh Kumar K.V]

Now that we use all the available virtual address range, we need to make sure
we don't generate VSID such that it overlaps with the reserved vsid range.
Reserved vsid range include the virtual address range used by the adjunct
partition and also the VRMA virtual segment. We find the context value that
can result in generating such a VSID and reserve it early in boot.

We don't look at the adjunct range, because for now we disable the adjunct usage
in a Linux LPAR via CAS interface.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/mmu-hash.h |  7 ++++
 arch/powerpc/include/asm/kvm_book3s_64.h      |  2 -
 arch/powerpc/include/asm/mmu_context.h        |  1 +
 arch/powerpc/mm/hash_utils_64.c               | 58 +++++++++++++++++++++++++++
 arch/powerpc/mm/mmu_context_book3s64.c        | 26 ++++++++++++
 5 files changed, 92 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index c99ea6bbd82c..ac987e08ce63 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -578,11 +578,18 @@ extern void slb_set_size(u16 size);
 #define VSID_MULTIPLIER_256M	ASM_CONST(12538073)	/* 24-bit prime */
 #define VSID_BITS_256M		(VA_BITS - SID_SHIFT)
 #define VSID_BITS_65_256M	(65 - SID_SHIFT)
+/*
+ * Modular multiplicative inverse of VSID_MULTIPLIER under modulo VSID_MODULUS
+ */
+#define VSID_MULINV_256M	ASM_CONST(665548017062)
 
 #define VSID_MULTIPLIER_1T	ASM_CONST(12538073)	/* 24-bit prime */
 #define VSID_BITS_1T		(VA_BITS - SID_SHIFT_1T)
 #define VSID_BITS_65_1T		(65 - SID_SHIFT_1T)
+#define VSID_MULINV_1T		ASM_CONST(209034062)
 
+/* 1TB VSID reserved for VRMA */
+#define VRMA_VSID	0x1ffffffUL
 #define USER_VSID_RANGE	(1UL << (ESID_BITS + SID_SHIFT))
 
 /* 4 bits per slice and we have one slice per 1TB */
diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
index d9b48f5bb606..d55c7f881ce7 100644
--- a/arch/powerpc/include/asm/kvm_book3s_64.h
+++ b/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -49,8 +49,6 @@ static inline bool kvm_is_radix(struct kvm *kvm)
 #define KVM_DEFAULT_HPT_ORDER	24	/* 16MB HPT by default */
 #endif
 
-#define VRMA_VSID	0x1ffffffUL	/* 1TB VSID reserved for VRMA */
-
 /*
  * We use a lock bit in HPTE dword 0 to synchronize updates and
  * accesses to each HPTE, and another bit to indicate non-present
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 8fe1ba1808d3..757d4a9e1a1c 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -51,6 +51,7 @@ static inline void switch_mmu_context(struct mm_struct *prev,
 	return switch_slb(tsk, next);
 }
 
+extern void hash__resv_context(int context_id);
 extern int hash__get_new_context(void);
 extern void __destroy_context(int context_id);
 static inline void mmu_context_init(void) { }
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 04523052ad8e..81db182225fb 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -1846,4 +1846,62 @@ static int __init hash64_debugfs(void)
 }
 machine_device_initcall(pseries, hash64_debugfs);
 
+/*
+ * if modinv is the modular multiplicate inverse of (x % vsid_modulus) and
+ * vsid = (protovsid * x) % vsid_modulus, then we say
+ *
+ * provosid = (vsid * modinv) % vsid_modulus
+ */
+static unsigned long vsid_unscramble(unsigned long vsid, int ssize)
+{
+	unsigned long protovsid;
+	unsigned long va_bits = VA_BITS;
+	unsigned long modinv, vsid_modulus;
+	unsigned long max_mod_inv, tmp_modinv;
+
+
+	if (!mmu_has_feature(MMU_FTR_68_BIT_VA))
+		va_bits = 65;
+
+	if (ssize == MMU_SEGSIZE_256M) {
+		modinv = VSID_MULINV_256M;
+		vsid_modulus = ((1UL << (va_bits - SID_SHIFT)) - 1);
+	} else {
+		modinv = VSID_MULINV_1T;
+		vsid_modulus = ((1UL << (va_bits - SID_SHIFT_1T)) - 1);
+	}
+	/*
+	 * vsid outside our range.
+	 */
+	if (vsid >= vsid_modulus)
+		return 0;
+
+	/* Check if (vsid * modinv) overflow (63 bits) */
+	max_mod_inv = 0x7fffffffffffffffull / vsid;
+	if (modinv < max_mod_inv)
+		return (vsid * modinv) % vsid_modulus;
+
+	tmp_modinv = modinv/max_mod_inv;
+	modinv %= max_mod_inv;
+
+	protovsid = (((vsid * max_mod_inv) % vsid_modulus) * tmp_modinv) % vsid_modulus;
+	protovsid = (protovsid + vsid * modinv) % vsid_modulus;
+	return protovsid;
+}
+
+static int __init hash_init_reserved_context(void)
+{
+	unsigned long protovsid;
+
+	/*
+	 * VRMA_VSID to skip list. We don't bother about
+	 * ibm,adjunct-virtual-addresses because we disable
+	 * via ibm,client-architecture-support interface.
+	 */
+	protovsid = vsid_unscramble(VRMA_VSID, MMU_SEGSIZE_1T);
+	hash__resv_context(protovsid >> ESID_BITS_1T);
+	return 0;
+}
+machine_device_initcall(pseries, hash_init_reserved_context);
+
 #endif /* CONFIG_DEBUG_FS */
diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c
index 9ab6cd2923be..8ca0e50d8703 100644
--- a/arch/powerpc/mm/mmu_context_book3s64.c
+++ b/arch/powerpc/mm/mmu_context_book3s64.c
@@ -30,6 +30,32 @@
 static DEFINE_SPINLOCK(mmu_context_lock);
 static DEFINE_IDA(mmu_context_ida);
 
+void hash__resv_context(int context)
+{
+	int index = 0, err;
+
+	/*
+	 * context zero is always valid. We can't reserve it
+	 */
+	if (!context)
+		return;
+again:
+	if (!ida_pre_get(&mmu_context_ida, GFP_KERNEL))
+		goto error_out;
+
+	spin_lock(&mmu_context_lock);
+	err = ida_get_new_above(&mmu_context_ida, context, &index);
+	spin_unlock(&mmu_context_lock);
+
+	if (err == -EAGAIN)
+		goto again;
+error_out:
+	if (index != context)
+		WARN(1, "Failed to resv context %d (got %d)\n", context, index);
+	else
+		pr_info("Reserving context %d\n", context);
+}
+
 int hash__get_new_context(void)
 {
 	int index, err;
-- 
2.7.4

[PATCH V5 15/17] powerpc/mm: Switch TASK_SIZE check to use mm->task_size

[Aneesh Kumar K.V]

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/mm/hugetlbpage-radix.c |  4 ++--
 arch/powerpc/mm/mmap.c              | 12 ++++++------
 arch/powerpc/mm/slice.c             |  6 +++---
 arch/powerpc/mm/subpage-prot.c      |  3 ++-
 4 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/mm/hugetlbpage-radix.c b/arch/powerpc/mm/hugetlbpage-radix.c
index 35254a678456..686cfe8e664b 100644
--- a/arch/powerpc/mm/hugetlbpage-radix.c
+++ b/arch/powerpc/mm/hugetlbpage-radix.c
@@ -52,7 +52,7 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 
 	if (len & ~huge_page_mask(h))
 		return -EINVAL;
-	if (len > TASK_SIZE)
+	if (len > mm->task_size)
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED) {
@@ -64,7 +64,7 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	if (addr) {
 		addr = ALIGN(addr, huge_page_size(h));
 		vma = find_vma(mm, addr);
-		if (TASK_SIZE - len >= addr &&
+		if (mm->task_size - len >= addr &&
 		    (!vma || addr + len <= vma->vm_start))
 			return addr;
 	}
diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap.c
index a5d9ef59debe..bce788a41bc3 100644
--- a/arch/powerpc/mm/mmap.c
+++ b/arch/powerpc/mm/mmap.c
@@ -97,7 +97,7 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	struct vm_area_struct *vma;
 	struct vm_unmapped_area_info info;
 
-	if (len > TASK_SIZE - mmap_min_addr)
+	if (len > mm->task_size - mmap_min_addr)
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED)
@@ -106,7 +106,7 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	if (addr) {
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
-		if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
+		if (mm->task_size - len >= addr && addr >= mmap_min_addr &&
 		    (!vma || addr + len <= vma->vm_start))
 			return addr;
 	}
@@ -114,7 +114,7 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	info.flags = 0;
 	info.length = len;
 	info.low_limit = mm->mmap_base;
-	info.high_limit = TASK_SIZE;
+	info.high_limit = mm->task_size;
 	info.align_mask = 0;
 	return vm_unmapped_area(&info);
 }
@@ -132,7 +132,7 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
 	struct vm_unmapped_area_info info;
 
 	/* requested length too big for entire address space */
-	if (len > TASK_SIZE - mmap_min_addr)
+	if (len > mm->task_size - mmap_min_addr)
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED)
@@ -142,7 +142,7 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
 	if (addr) {
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
-		if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
+		if (mm->task_size - len >= addr && addr >= mmap_min_addr &&
 				(!vma || addr + len <= vma->vm_start))
 			return addr;
 	}
@@ -164,7 +164,7 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
 		VM_BUG_ON(addr != -ENOMEM);
 		info.flags = 0;
 		info.low_limit = TASK_UNMAPPED_BASE;
-		info.high_limit = TASK_SIZE;
+		info.high_limit = mm->task_size;
 		addr = vm_unmapped_area(&info);
 	}
 
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index 217638846053..6d214786a2df 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -277,7 +277,7 @@ static unsigned long slice_find_area_bottomup(struct mm_struct *mm,
 	info.align_offset = 0;
 
 	addr = TASK_UNMAPPED_BASE;
-	while (addr < TASK_SIZE) {
+	while (addr < mm->task_size) {
 		info.low_limit = addr;
 		if (!slice_scan_available(addr, available, 1, &addr))
 			continue;
@@ -289,8 +289,8 @@ static unsigned long slice_find_area_bottomup(struct mm_struct *mm,
 		 * Check if we need to reduce the range, or if we can
 		 * extend it to cover the next available slice.
 		 */
-		if (addr >= TASK_SIZE)
-			addr = TASK_SIZE;
+		if (addr >= mm->task_size)
+			addr = mm->task_size;
 		else if (slice_scan_available(addr, available, 1, &next_end)) {
 			addr = next_end;
 			goto next_slice;
diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c
index 94210940112f..e94fbd4c8845 100644
--- a/arch/powerpc/mm/subpage-prot.c
+++ b/arch/powerpc/mm/subpage-prot.c
@@ -197,7 +197,8 @@ long sys_subpage_prot(unsigned long addr, unsigned long len, u32 __user *map)
 
 	/* Check parameters */
 	if ((addr & ~PAGE_MASK) || (len & ~PAGE_MASK) ||
-	    addr >= TASK_SIZE || len >= TASK_SIZE || addr + len > TASK_SIZE)
+	    addr >= mm->task_size || len >= mm->task_size ||
+	    addr + len > mm->task_size)
 		return -EINVAL;
 
 	if (is_hugepage_only_range(mm, addr, len))
-- 
2.7.4

[PATCH V5 16/17] mm: Let arch choose the initial value of task size

[Aneesh Kumar K.V]

As we start supporting larger address space (>128TB), we want to give
architecture a control on max task size of an application which is different
from the TASK_SIZE. For ex: ppc64 needs to track the base page size of a segment
and it is copied from mm_context_t to PACA on each context switch. If we know that
application has not used an address range above 128TB we only need to copy
details about 128TB range to PACA. This will help in improving context switch
performance by avoiding larger copy operation.

Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 fs/exec.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/exec.c b/fs/exec.c
index 65145a3df065..5550a56d03c3 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1308,6 +1308,14 @@ void would_dump(struct linux_binprm *bprm, struct file *file)
 }
 EXPORT_SYMBOL(would_dump);
 
+#ifndef arch_init_task_size
+static inline void arch_init_task_size(void)
+{
+	current->mm->task_size = TASK_SIZE;
+}
+#define arch_init_task_size arch_init_task_size
+#endif
+
 void setup_new_exec(struct linux_binprm * bprm)
 {
 	arch_pick_mmap_layout(current->mm);
@@ -1327,7 +1335,7 @@ void setup_new_exec(struct linux_binprm * bprm)
 	 * depend on TIF_32BIT which is only updated in flush_thread() on
 	 * some architectures like powerpc
 	 */
-	current->mm->task_size = TASK_SIZE;
+	arch_init_task_size();
 
 	/* install the new credentials */
 	if (!uid_eq(bprm->cred->uid, current_euid()) ||
-- 
2.7.4

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

[PATCH V5 16/17] mm: Let arch choose the initial value of task size

[Aneesh Kumar K.V]

As we start supporting larger address space (>128TB), we want to give
architecture a control on max task size of an application which is different
from the TASK_SIZE. For ex: ppc64 needs to track the base page size of a segment
and it is copied from mm_context_t to PACA on each context switch. If we know that
application has not used an address range above 128TB we only need to copy
details about 128TB range to PACA. This will help in improving context switch
performance by avoiding larger copy operation.

Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 fs/exec.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/exec.c b/fs/exec.c
index 65145a3df065..5550a56d03c3 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1308,6 +1308,14 @@ void would_dump(struct linux_binprm *bprm, struct file *file)
 }
 EXPORT_SYMBOL(would_dump);
 
+#ifndef arch_init_task_size
+static inline void arch_init_task_size(void)
+{
+	current->mm->task_size = TASK_SIZE;
+}
+#define arch_init_task_size arch_init_task_size
+#endif
+
 void setup_new_exec(struct linux_binprm * bprm)
 {
 	arch_pick_mmap_layout(current->mm);
@@ -1327,7 +1335,7 @@ void setup_new_exec(struct linux_binprm * bprm)
 	 * depend on TIF_32BIT which is only updated in flush_thread() on
 	 * some architectures like powerpc
 	 */
-	current->mm->task_size = TASK_SIZE;
+	arch_init_task_size();
 
 	/* install the new credentials */
 	if (!uid_eq(bprm->cred->uid, current_euid()) ||
-- 
2.7.4

[PATCH V5 17/17] powerpc/mm: Enable mappings above 128TB

[Aneesh Kumar K.V]

Not all user space application is ready to handle wide addresses. It's known that
at least some JIT compilers use higher bits in pointers to encode their
information. It collides with valid pointers with 512TB addresses and
leads to crashes.

To mitigate this, we are not going to allocate virtual address space
above 128TB by default.

But userspace can ask for allocation from full address space by
specifying hint address (with or without MAP_FIXED) above 128TB.

If hint address set above 128TB, but MAP_FIXED is not specified, we try
to look for unmapped area by specified address. If it's already
occupied, we look for unmapped area in *full* address space, rather than
from 128TB window.

This approach helps to easily make application's memory allocator aware
about large address space without manually tracking allocated virtual
address space.

This is going to be a per mmap decision. ie, we can have some mmaps with larger
addresses and other that do not.

A sample memory layout looks like below.

10000000-10010000 r-xp 00000000 fc:00 9057045                            /home/max_addr_512TB
10010000-10020000 r--p 00000000 fc:00 9057045                            /home/max_addr_512TB
10020000-10030000 rw-p 00010000 fc:00 9057045                            /home/max_addr_512TB
10029630000-10029660000 rw-p 00000000 00:00 0                            [heap]
7fff834a0000-7fff834b0000 rw-p 00000000 00:00 0
7fff834b0000-7fff83670000 r-xp 00000000 fc:00 9177190                    /lib/powerpc64le-linux-gnu/libc-2.23.so
7fff83670000-7fff83680000 r--p 001b0000 fc:00 9177190                    /lib/powerpc64le-linux-gnu/libc-2.23.so
7fff83680000-7fff83690000 rw-p 001c0000 fc:00 9177190                    /lib/powerpc64le-linux-gnu/libc-2.23.so
7fff83690000-7fff836a0000 rw-p 00000000 00:00 0
7fff836a0000-7fff836c0000 r-xp 00000000 00:00 0                          [vdso]
7fff836c0000-7fff83700000 r-xp 00000000 fc:00 9177193                    /lib/powerpc64le-linux-gnu/ld-2.23.so
7fff83700000-7fff83710000 r--p 00030000 fc:00 9177193                    /lib/powerpc64le-linux-gnu/ld-2.23.so
7fff83710000-7fff83720000 rw-p 00040000 fc:00 9177193                    /lib/powerpc64le-linux-gnu/ld-2.23.so
7fffdccf0000-7fffdcd20000 rw-p 00000000 00:00 0                          [stack]
1000000000000-1000000010000 rw-p 00000000 00:00 0
1ffff83710000-1ffff83720000 rw-p 00000000 00:00 0

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/processor.h | 27 ++++++++++++++----
 arch/powerpc/mm/hugetlbpage-radix.c  |  7 +++++
 arch/powerpc/mm/mmap.c               | 33 ++++++++++++++--------
 arch/powerpc/mm/slice.c              | 55 ++++++++++++++++++++++++++++--------
 4 files changed, 94 insertions(+), 28 deletions(-)

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 146c3a91d89f..e3e667240d8f 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -114,9 +114,9 @@ void release_thread(struct task_struct *);
 /*
  * MAx value currently used:
  */
-#define TASK_SIZE_USER64 TASK_SIZE_128TB
+#define TASK_SIZE_USER64	TASK_SIZE_512TB
 #else
-#define TASK_SIZE_USER64 TASK_SIZE_64TB
+#define TASK_SIZE_USER64	TASK_SIZE_64TB
 #endif
 
 /*
@@ -128,26 +128,43 @@ void release_thread(struct task_struct *);
 #define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \
 		TASK_SIZE_USER32 : TASK_SIZE_USER64)
 #define TASK_SIZE	  TASK_SIZE_OF(current)
+/*
+ * We want to track current task size in mm->task_size not the max possible
+ * task size.
+ */
+#define arch_init_task_size() (current->mm->task_size = DEFAULT_MAP_WINDOW)
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
 #define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
-#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4))
+#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_128TB / 4))
 
 #define TASK_UNMAPPED_BASE ((is_32bit_task()) ? \
 		TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
 #endif
 
+/*
+ * Initial task size value for user applications. For book3s 64 we start
+ * with 128TB and conditionally enable upto 512TB
+ */
+#ifdef CONFIG_PPC_BOOK3S_64
+#define DEFAULT_MAP_WINDOW	((is_32bit_task()) ? \
+				 TASK_SIZE_USER32 : TASK_SIZE_128TB)
+#else
+#define DEFAULT_MAP_WINDOW	TASK_SIZE
+#endif
+
 #ifdef __powerpc64__
 
-#define STACK_TOP_USER64 TASK_SIZE_USER64
+/* Limit stack to 128TB */
+#define STACK_TOP_USER64 TASK_SIZE_128TB
 #define STACK_TOP_USER32 TASK_SIZE_USER32
 
 #define STACK_TOP (is_32bit_task() ? \
 		   STACK_TOP_USER32 : STACK_TOP_USER64)
 
-#define STACK_TOP_MAX STACK_TOP_USER64
+#define STACK_TOP_MAX TASK_SIZE_USER64
 
 #else /* __powerpc64__ */
 
diff --git a/arch/powerpc/mm/hugetlbpage-radix.c b/arch/powerpc/mm/hugetlbpage-radix.c
index 686cfe8e664b..f596215d0c1b 100644
--- a/arch/powerpc/mm/hugetlbpage-radix.c
+++ b/arch/powerpc/mm/hugetlbpage-radix.c
@@ -50,6 +50,9 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	struct hstate *h = hstate_file(file);
 	struct vm_unmapped_area_info info;
 
+	if (unlikely(addr > mm->task_size && addr < TASK_SIZE))
+		mm->task_size = TASK_SIZE;
+
 	if (len & ~huge_page_mask(h))
 		return -EINVAL;
 	if (len > mm->task_size)
@@ -78,5 +81,9 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	info.high_limit = current->mm->mmap_base;
 	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
 	info.align_offset = 0;
+
+	if (addr > DEFAULT_MAP_WINDOW)
+		info.high_limit += mm->task_size - DEFAULT_MAP_WINDOW;
+
 	return vm_unmapped_area(&info);
 }
diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap.c
index bce788a41bc3..a0a7884822b0 100644
--- a/arch/powerpc/mm/mmap.c
+++ b/arch/powerpc/mm/mmap.c
@@ -79,7 +79,7 @@ static inline unsigned long mmap_base(unsigned long rnd)
 	else if (gap > MAX_GAP)
 		gap = MAX_GAP;
 
-	return PAGE_ALIGN(TASK_SIZE - gap - rnd);
+	return PAGE_ALIGN(DEFAULT_MAP_WINDOW - gap - rnd);
 }
 
 #ifdef CONFIG_PPC_RADIX_MMU
@@ -97,6 +97,10 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	struct vm_area_struct *vma;
 	struct vm_unmapped_area_info info;
 
+
+	if (unlikely(addr > mm->task_size && addr < TASK_SIZE))
+		mm->task_size = TASK_SIZE;
+
 	if (len > mm->task_size - mmap_min_addr)
 		return -ENOMEM;
 
@@ -114,8 +118,13 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	info.flags = 0;
 	info.length = len;
 	info.low_limit = mm->mmap_base;
-	info.high_limit = mm->task_size;
 	info.align_mask = 0;
+
+	if (unlikely(addr > DEFAULT_MAP_WINDOW))
+		info.high_limit = mm->task_size;
+	else
+		info.high_limit = DEFAULT_MAP_WINDOW;
+
 	return vm_unmapped_area(&info);
 }
 
@@ -131,6 +140,9 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
 	unsigned long addr = addr0;
 	struct vm_unmapped_area_info info;
 
+	if (unlikely(addr > mm->task_size && addr < TASK_SIZE))
+		mm->task_size = TASK_SIZE;
+
 	/* requested length too big for entire address space */
 	if (len > mm->task_size - mmap_min_addr)
 		return -ENOMEM;
@@ -152,7 +164,14 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
 	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
 	info.high_limit = mm->mmap_base;
 	info.align_mask = 0;
+
+	if (addr > DEFAULT_MAP_WINDOW)
+		info.high_limit += mm->task_size - DEFAULT_MAP_WINDOW;
+
 	addr = vm_unmapped_area(&info);
+	if (!(addr & ~PAGE_MASK))
+		return addr;
+	VM_BUG_ON(addr != -ENOMEM);
 
 	/*
 	 * A failed mmap() very likely causes application failure,
@@ -160,15 +179,7 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
 	 * can happen with large stack limits and large mmap()
 	 * allocations.
 	 */
-	if (addr & ~PAGE_MASK) {
-		VM_BUG_ON(addr != -ENOMEM);
-		info.flags = 0;
-		info.low_limit = TASK_UNMAPPED_BASE;
-		info.high_limit = mm->task_size;
-		addr = vm_unmapped_area(&info);
-	}
-
-	return addr;
+	return radix__arch_get_unmapped_area(filp, addr0, len, pgoff, flags);
 }
 
 static void radix__arch_pick_mmap_layout(struct mm_struct *mm,
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index 6d214786a2df..f808f99372e4 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -265,7 +265,7 @@ static bool slice_scan_available(unsigned long addr,
 static unsigned long slice_find_area_bottomup(struct mm_struct *mm,
 					      unsigned long len,
 					      struct slice_mask available,
-					      int psize)
+					      int psize, unsigned long high_limit)
 {
 	int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT);
 	unsigned long addr, found, next_end;
@@ -277,7 +277,10 @@ static unsigned long slice_find_area_bottomup(struct mm_struct *mm,
 	info.align_offset = 0;
 
 	addr = TASK_UNMAPPED_BASE;
-	while (addr < mm->task_size) {
+	/*
+	 * Check till the allow max value for this mmap request
+	 */
+	while (addr < high_limit) {
 		info.low_limit = addr;
 		if (!slice_scan_available(addr, available, 1, &addr))
 			continue;
@@ -308,7 +311,7 @@ static unsigned long slice_find_area_bottomup(struct mm_struct *mm,
 static unsigned long slice_find_area_topdown(struct mm_struct *mm,
 					     unsigned long len,
 					     struct slice_mask available,
-					     int psize)
+					     int psize, unsigned long high_limit)
 {
 	int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT);
 	unsigned long addr, found, prev;
@@ -320,6 +323,16 @@ static unsigned long slice_find_area_topdown(struct mm_struct *mm,
 	info.align_offset = 0;
 
 	addr = mm->mmap_base;
+	/*
+	 * If we are trying to allocate above DEFAULT_MAP_WINDOW
+	 * Add the different to the mmap_base. We don't want to
+	 * check against mm->task_size, because we don't do this
+	 * for all mmap request. Only for that request for which high_limit
+	 * is above DEFAULT_MAP_WINDOW we should apply this.
+	 */
+	if (high_limit  > DEFAULT_MAP_WINDOW)
+		addr += mm->task_size - DEFAULT_MAP_WINDOW;
+
 	while (addr > PAGE_SIZE) {
 		info.high_limit = addr;
 		if (!slice_scan_available(addr - 1, available, 0, &addr))
@@ -351,18 +364,18 @@ static unsigned long slice_find_area_topdown(struct mm_struct *mm,
 	 * can happen with large stack limits and large mmap()
 	 * allocations.
 	 */
-	return slice_find_area_bottomup(mm, len, available, psize);
+	return slice_find_area_bottomup(mm, len, available, psize, high_limit);
 }
 
 
 static unsigned long slice_find_area(struct mm_struct *mm, unsigned long len,
 				     struct slice_mask mask, int psize,
-				     int topdown)
+				     int topdown, unsigned long high_limit)
 {
 	if (topdown)
-		return slice_find_area_topdown(mm, len, mask, psize);
+		return slice_find_area_topdown(mm, len, mask, psize, high_limit);
 	else
-		return slice_find_area_bottomup(mm, len, mask, psize);
+		return slice_find_area_bottomup(mm, len, mask, psize, high_limit);
 }
 
 static inline void slice_or_mask(struct slice_mask *dst, struct slice_mask *src)
@@ -402,8 +415,23 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT);
 	struct mm_struct *mm = current->mm;
 	unsigned long newaddr;
+	unsigned long high_limit;
 
 	/*
+	 * Check if we need to expland slice area.
+	 */
+	if (unlikely(addr > mm->task_size && addr < TASK_SIZE)) {
+		mm->task_size = TASK_SIZE;
+		on_each_cpu(slice_flush_segments, mm, 1);
+	}
+	/*
+	 * This mmap request can allocate upt to 512TB
+	 */
+	if (addr > DEFAULT_MAP_WINDOW)
+		high_limit = mm->task_size;
+	else
+		high_limit = DEFAULT_MAP_WINDOW;
+	/*
 	 * init different masks
 	 */
 	mask.low_slices = 0;
@@ -494,7 +522,8 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 		/* Now let's see if we can find something in the existing
 		 * slices for that size
 		 */
-		newaddr = slice_find_area(mm, len, good_mask, psize, topdown);
+		newaddr = slice_find_area(mm, len, good_mask,
+					  psize, topdown, high_limit);
 		if (newaddr != -ENOMEM) {
 			/* Found within the good mask, we don't have to setup,
 			 * we thus return directly
@@ -526,7 +555,8 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	 * anywhere in the good area.
 	 */
 	if (addr) {
-		addr = slice_find_area(mm, len, good_mask, psize, topdown);
+		addr = slice_find_area(mm, len, good_mask,
+				       psize, topdown, high_limit);
 		if (addr != -ENOMEM) {
 			slice_dbg(" found area at 0x%lx\n", addr);
 			return addr;
@@ -536,14 +566,15 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	/* Now let's see if we can find something in the existing slices
 	 * for that size plus free slices
 	 */
-	addr = slice_find_area(mm, len, potential_mask, psize, topdown);
+	addr = slice_find_area(mm, len, potential_mask,
+			       psize, topdown, high_limit);
 
 #ifdef CONFIG_PPC_64K_PAGES
 	if (addr == -ENOMEM && psize == MMU_PAGE_64K) {
 		/* retry the search with 4k-page slices included */
 		slice_or_mask(&potential_mask, &compat_mask);
-		addr = slice_find_area(mm, len, potential_mask, psize,
-				       topdown);
+		addr = slice_find_area(mm, len, potential_mask,
+				       psize, topdown, high_limit);
 	}
 #endif
 
-- 
2.7.4

Re: [PATCH V5 16/17] mm: Let arch choose the initial value of task size

[Michael Ellerman]

"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> writes:

> As we start supporting larger address space (>128TB), we want to give
> architecture a control on max task size of an application which is different
> from the TASK_SIZE. For ex: ppc64 needs to track the base page size of a segment
> and it is copied from mm_context_t to PACA on each context switch. If we know that
> application has not used an address range above 128TB we only need to copy
> details about 128TB range to PACA. This will help in improving context switch
> performance by avoiding larger copy operation.
>
> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
> Cc: linux-mm@kvack.org
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> ---
>  fs/exec.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)

I'll need an ACK at least on this from someone in mm land.

I assume there's no way I can merge patch 17 without this?

> diff --git a/fs/exec.c b/fs/exec.c
> index 65145a3df065..5550a56d03c3 100644
> --- a/fs/exec.c
> +++ b/fs/exec.c
> @@ -1308,6 +1308,14 @@ void would_dump(struct linux_binprm *bprm, struct file *file)
>  }
>  EXPORT_SYMBOL(would_dump);
>  
> +#ifndef arch_init_task_size
> +static inline void arch_init_task_size(void)
> +{
> +	current->mm->task_size = TASK_SIZE;
> +}
> +#define arch_init_task_size arch_init_task_size

I don't think you need to do the #define in the fallback case, it's
just extra noise.

> +#endif
> +
>  void setup_new_exec(struct linux_binprm * bprm)
>  {
>  	arch_pick_mmap_layout(current->mm);

cheers

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH V5 16/17] mm: Let arch choose the initial value of task size

[Michael Ellerman]

"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> writes:

> As we start supporting larger address space (>128TB), we want to give
> architecture a control on max task size of an application which is different
> from the TASK_SIZE. For ex: ppc64 needs to track the base page size of a segment
> and it is copied from mm_context_t to PACA on each context switch. If we know that
> application has not used an address range above 128TB we only need to copy
> details about 128TB range to PACA. This will help in improving context switch
> performance by avoiding larger copy operation.
>
> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
> Cc: linux-mm@kvack.org
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> ---
>  fs/exec.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)

I'll need an ACK at least on this from someone in mm land.

I assume there's no way I can merge patch 17 without this?

> diff --git a/fs/exec.c b/fs/exec.c
> index 65145a3df065..5550a56d03c3 100644
> --- a/fs/exec.c
> +++ b/fs/exec.c
> @@ -1308,6 +1308,14 @@ void would_dump(struct linux_binprm *bprm, struct file *file)
>  }
>  EXPORT_SYMBOL(would_dump);
>  
> +#ifndef arch_init_task_size
> +static inline void arch_init_task_size(void)
> +{
> +	current->mm->task_size = TASK_SIZE;
> +}
> +#define arch_init_task_size arch_init_task_size

I don't think you need to do the #define in the fallback case, it's
just extra noise.

> +#endif
> +
>  void setup_new_exec(struct linux_binprm * bprm)
>  {
>  	arch_pick_mmap_layout(current->mm);

cheers

Re: [PATCH V5 16/17] mm: Let arch choose the initial value of task size

[Aneesh Kumar K.V]

On Tuesday 28 March 2017 04:47 PM, Michael Ellerman wrote:
> "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> writes:
>
>> As we start supporting larger address space (>128TB), we want to give
>> architecture a control on max task size of an application which is different
>> from the TASK_SIZE. For ex: ppc64 needs to track the base page size of a segment
>> and it is copied from mm_context_t to PACA on each context switch. If we know that
>> application has not used an address range above 128TB we only need to copy
>> details about 128TB range to PACA. This will help in improving context switch
>> performance by avoiding larger copy operation.
>>
>> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
>> Cc: linux-mm@kvack.org
>> Cc: Andrew Morton <akpm@linux-foundation.org>
>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
>> ---
>>  fs/exec.c | 10 +++++++++-
>>  1 file changed, 9 insertions(+), 1 deletion(-)
>
> I'll need an ACK at least on this from someone in mm land.
>
> I assume there's no way I can merge patch 17 without this?

That is correct.

I didn't add linux-mm to cc for rest of the patches. They are all ppc64 
specific and can be found at

https://lists.ozlabs.org/pipermail/linuxppc-dev/2017-March/155726.html


-aneesh

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH V5 16/17] mm: Let arch choose the initial value of task size

[Aneesh Kumar K.V]

On Tuesday 28 March 2017 04:47 PM, Michael Ellerman wrote:
> "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> writes:
>
>> As we start supporting larger address space (>128TB), we want to give
>> architecture a control on max task size of an application which is different
>> from the TASK_SIZE. For ex: ppc64 needs to track the base page size of a segment
>> and it is copied from mm_context_t to PACA on each context switch. If we know that
>> application has not used an address range above 128TB we only need to copy
>> details about 128TB range to PACA. This will help in improving context switch
>> performance by avoiding larger copy operation.
>>
>> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
>> Cc: linux-mm@kvack.org
>> Cc: Andrew Morton <akpm@linux-foundation.org>
>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
>> ---
>>  fs/exec.c | 10 +++++++++-
>>  1 file changed, 9 insertions(+), 1 deletion(-)
>
> I'll need an ACK at least on this from someone in mm land.
>
> I assume there's no way I can merge patch 17 without this?

That is correct.

I didn't add linux-mm to cc for rest of the patches. They are all ppc64 
specific and can be found at

https://lists.ozlabs.org/pipermail/linuxppc-dev/2017-March/155726.html


-aneesh

Re: [PATCH V5 01/17] powerpc/mm/slice: Convert slice_mask high slice to a bitmap

[Paul Mackerras]

On Wed, Mar 22, 2017 at 09:06:47AM +0530, Aneesh Kumar K.V wrote:
> In followup patch we want to increase the va range which will result
> in us requiring high_slices to have more than 64 bits. To enable this
> convert high_slices to bitmap. We keep the number bits same in this patch
> and later change that to higher value

See comment below...

> @@ -531,8 +569,8 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
>  	slice_print_mask(" mask", mask);
>  
>   convert:
> -	andnot_mask(mask, good_mask);
> -	andnot_mask(mask, compat_mask);
> +	slice_andnot_mask(&mask, &good_mask);
> +	slice_andnot_mask(&mask, &compat_mask);
>  	if (mask.low_slices || mask.high_slices) {

The test on mask.high_slices here wants to test whether high_slices
has any bits set, but with the conversion to a bitmap, the test will
be always true since what will be tested is the address of the array
in the bitmap.

Paul.

Re: [PATCH V5 04/17] powerpc/mm: Remove redundant TASK_SIZE_USER64 checks

[Michael Ellerman]

"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> writes:

> The check against VSID range is implied when we check task size against
> hash and radix pgtable range[1], because we make sure page table range cannot
> exceed vsid range.
>
> [1] BUILD_BUG_ON(TASK_SIZE_USER64 > H_PGTABLE_RANGE);
> BUILD_BUG_ON(TASK_SIZE_USER64 > RADIX_PGTABLE_RANGE);
>
> The check for smaller task size is also removed here, because the follow up
> patch will support a tasksize smaller than pgtable range.
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> ---
>  arch/powerpc/mm/init_64.c    | 4 ----
>  arch/powerpc/mm/pgtable_64.c | 5 -----
>  2 files changed, 9 deletions(-)

As discussed this has become:

commit f0aceca42796829295f5d20d01d4bee9773b63b7
Author:     Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
AuthorDate: Wed Mar 22 09:06:50 2017 +0530
Commit:     Michael Ellerman <mpe@ellerman.id.au>
CommitDate: Tue Mar 28 20:28:20 2017 +1100

    powerpc/mm: Remove checks that TASK_SIZE_USER64 is too small
    
    Remove the checks that TASK_SIZE_USER64 is smaller than H_PGTABLE_RANGE
    and USER_VSID_RANGE.
    
    In a following patch we will deliberately add support for a TASK_SIZE
    smaller than both ranges, so this will no longer be an error condition.
    
    Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
    [mpe: Keep the check in pgtable_64.c that we don't exceed USER_VSID_RANGE]
    Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 9be992083d2a..8f6f2a173e47 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -71,10 +71,6 @@
 #if H_PGTABLE_RANGE > USER_VSID_RANGE
 #warning Limited user VSID range means pagetable space is wasted
 #endif
-
-#if (TASK_SIZE_USER64 < H_PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE)
-#warning TASK_SIZE is smaller than it needs to be.
-#endif
 #endif /* CONFIG_PPC_STD_MMU_64 */
 
 phys_addr_t memstart_addr = ~0;


cheers

Re: [PATCH V5 02/17] powerpc/mm/slice: Update the function prototype

[Paul Mackerras]

On Wed, Mar 22, 2017 at 09:06:48AM +0530, Aneesh Kumar K.V wrote:
> This avoid copying the slice_mask struct as function return value

Did you do before/after comparisons of kernel text size?

Paul.

Re: [PATCH V5 01/17] powerpc/mm/slice: Convert slice_mask high slice to a bitmap

[Aneesh Kumar K.V]

On Wednesday 29 March 2017 08:41 AM, Paul Mackerras wrote:
> On Wed, Mar 22, 2017 at 09:06:47AM +0530, Aneesh Kumar K.V wrote:
>> In followup patch we want to increase the va range which will result
>> in us requiring high_slices to have more than 64 bits. To enable this
>> convert high_slices to bitmap. We keep the number bits same in this patch
>> and later change that to higher value
>
> See comment below...
>
>> @@ -531,8 +569,8 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
>>  	slice_print_mask(" mask", mask);
>>
>>   convert:
>> -	andnot_mask(mask, good_mask);
>> -	andnot_mask(mask, compat_mask);
>> +	slice_andnot_mask(&mask, &good_mask);
>> +	slice_andnot_mask(&mask, &compat_mask);
>>  	if (mask.low_slices || mask.high_slices) {
>
> The test on mask.high_slices here wants to test whether high_slices
> has any bits set, but with the conversion to a bitmap, the test will
> be always true since what will be tested is the address of the array
> in the bitmap.
>

Thanks for the review. How about the below change ?


diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index f808f99372e4..252d90b7c3c5 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -588,7 +588,7 @@ unsigned long slice_get_unmapped_area(unsigned long 
addr, unsigned long len,
   convert:
         slice_andnot_mask(&mask, &good_mask);
         slice_andnot_mask(&mask, &compat_mask);
-       if (mask.low_slices || mask.high_slices) {
+       if (mask.low_slices || !bitmap_empty(mask.high_slices, 
SLICE_NUM_HIGH)) {
                 slice_convert(mm, mask, psize);
                 if (psize > MMU_PAGE_BASE)
                         on_each_cpu(slice_flush_segments, mm, 1);

Re: [PATCH V5 16/17] mm: Let arch choose the initial value of task size

[Anshuman Khandual]

[-- Attachment #1: Type: text/plain, Size: 1505 bytes --]



On Wednesday 22 March 2017 09:07 AM, Aneesh Kumar K.V wrote:
> As we start supporting larger address space (>128TB), we want to give
> architecture a control on max task size of an application which is different
> from the TASK_SIZE. For ex: ppc64 needs to track the base page size of a segment
> and it is copied from mm_context_t to PACA on each context switch. If we know that
> application has not used an address range above 128TB we only need to copy
> details about 128TB range to PACA. This will help in improving context switch
> performance by avoiding larger copy operation.
>
> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
> Cc: linux-mm@kvack.org
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> ---
>   fs/exec.c | 10 +++++++++-
>   1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/fs/exec.c b/fs/exec.c
> index 65145a3df065..5550a56d03c3 100644
> --- a/fs/exec.c
> +++ b/fs/exec.c
> @@ -1308,6 +1308,14 @@ void would_dump(struct linux_binprm *bprm, struct file *file)
>   }
>   EXPORT_SYMBOL(would_dump);
>   
> +#ifndef arch_init_task_size
> +static inline void arch_init_task_size(void)
> +{
> +	current->mm->task_size = TASK_SIZE;
> +}
> +#define arch_init_task_size arch_init_task_size
> +#endif

Why not a proper CONFIG_ARCH_DEFINED_TASK_SIZE kind of option for this ? 
Also
are there no assumptions about task current->mm->size being TASK_SIZE in 
other
places which might get broken ?

[-- Attachment #2: Type: text/html, Size: 2295 bytes --]

Re: [PATCH V5 02/17] powerpc/mm/slice: Update the function prototype

[Aneesh Kumar K.V]

On Wednesday 29 March 2017 09:13 AM, Paul Mackerras wrote:
> On Wed, Mar 22, 2017 at 09:06:48AM +0530, Aneesh Kumar K.V wrote:
>> This avoid copying the slice_mask struct as function return value
>
> Did you do before/after comparisons of kernel text size?
>
> Paul.
>
    text    data     bss     dec     hex filename
10114479        5023602 1071772 16209853         f757bd 
./vmlinux.beforepatch
10114351        5023602 1071772 16209725         f7573d ./vmlinux.afterpatch

-aneesh

Re: [PATCH V5 16/17] mm: Let arch choose the initial value of task size

[Anshuman Khandual]

On 03/22/2017 09:07 AM, Aneesh Kumar K.V wrote:
> As we start supporting larger address space (>128TB), we want to give
> architecture a control on max task size of an application which is different
> from the TASK_SIZE. For ex: ppc64 needs to track the base page size of a segment
> and it is copied from mm_context_t to PACA on each context switch. If we know that
> application has not used an address range above 128TB we only need to copy
> details about 128TB range to PACA. This will help in improving context switch
> performance by avoiding larger copy operation.
> 
> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
> Cc: linux-mm@kvack.org
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> ---
>  fs/exec.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/fs/exec.c b/fs/exec.c
> index 65145a3df065..5550a56d03c3 100644
> --- a/fs/exec.c
> +++ b/fs/exec.c
> @@ -1308,6 +1308,14 @@ void would_dump(struct linux_binprm *bprm, struct file *file)
>  }
>  EXPORT_SYMBOL(would_dump);
>  
> +#ifndef arch_init_task_size
> +static inline void arch_init_task_size(void)
> +{
> +	current->mm->task_size = TASK_SIZE;
> +}
> +#define arch_init_task_size arch_init_task_size
> +#endif

Why not a proper CONFIG_ARCH_DEFINED_TASK_SIZE kind of option for
this ? Also are there no assumptions about task current->mm->size
being TASK_SIZE in other places which might get broken ?

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH V5 16/17] mm: Let arch choose the initial value of task size

[Anshuman Khandual]

On 03/22/2017 09:07 AM, Aneesh Kumar K.V wrote:
> As we start supporting larger address space (>128TB), we want to give
> architecture a control on max task size of an application which is different
> from the TASK_SIZE. For ex: ppc64 needs to track the base page size of a segment
> and it is copied from mm_context_t to PACA on each context switch. If we know that
> application has not used an address range above 128TB we only need to copy
> details about 128TB range to PACA. This will help in improving context switch
> performance by avoiding larger copy operation.
> 
> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
> Cc: linux-mm@kvack.org
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> ---
>  fs/exec.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/fs/exec.c b/fs/exec.c
> index 65145a3df065..5550a56d03c3 100644
> --- a/fs/exec.c
> +++ b/fs/exec.c
> @@ -1308,6 +1308,14 @@ void would_dump(struct linux_binprm *bprm, struct file *file)
>  }
>  EXPORT_SYMBOL(would_dump);
>  
> +#ifndef arch_init_task_size
> +static inline void arch_init_task_size(void)
> +{
> +	current->mm->task_size = TASK_SIZE;
> +}
> +#define arch_init_task_size arch_init_task_size
> +#endif

Why not a proper CONFIG_ARCH_DEFINED_TASK_SIZE kind of option for
this ? Also are there no assumptions about task current->mm->size
being TASK_SIZE in other places which might get broken ?