From: Loic Pallardy <loic.pallardy@st.com> To: bjorn.andersson@linaro.org, ohad@wizery.com Cc: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, arnaud.pouliquen@st.com, benjamin.gaignard@linaro.org, Loic Pallardy <loic.pallardy@st.com> Subject: [PATCH v2 04/16] remoteproc: introduce rproc_find_carveout_by_da Date: Thu, 30 Nov 2017 17:46:39 +0100 [thread overview] Message-ID: <1512060411-729-5-git-send-email-loic.pallardy@st.com> (raw) In-Reply-To: <1512060411-729-1-git-send-email-loic.pallardy@st.com> This patch provides a new function to find a carveout according to a device address (da). If match found, this function returns CPU virtual address corresponding to specified da. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> --- drivers/remoteproc/remoteproc_core.c | 42 ++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 279320a..78525d1 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -211,6 +211,48 @@ void *rproc_da_to_va(struct rproc *rproc, u64 da, int len) } EXPORT_SYMBOL(rproc_da_to_va); +/** + * rproc_find_carveout_by_da() - lookup the carveout region for a remoteproc address + * @rproc: handle of a remote processor + * @da: remoteproc device address to find + * @len: length of the memory region @da is pointing to + * + * Platform driver has the capability to register some pre-allacoted carveout + * (physically contiguous memory regions) before rproc firmware loading and + * associated resource table analysis. These regions may be dedicated memory + * regions internal to the coprocessor or specified DDR region with specific + * attributes + * + * This function is a helper function with which we can go over the + * allocated carveouts and translate specific device addresse to virtual + * addresse so we can fill firmware resource table. + * + * The function returns a valid virtual address on success or NULL on failure. + */ +void *rproc_find_carveout_by_da(struct rproc *rproc, u64 da, int len) +{ + struct rproc_mem_entry *carveout; + void *va = NULL; + + list_for_each_entry(carveout, &rproc->carveouts, node) { + int offset = da - carveout->da; + + /* try next carveout if da is too small */ + if (offset < 0) + continue; + + /* try next carveout if da is too large */ + if (offset + len > carveout->len) + continue; + + va = carveout->va + offset; + + break; + } + + return va; +} + int rproc_alloc_vring(struct rproc_vdev *rvdev, int i) { struct rproc *rproc = rvdev->rproc; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Loic Pallardy <loic.pallardy@st.com> To: <bjorn.andersson@linaro.org>, <ohad@wizery.com> Cc: <linux-remoteproc@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <arnaud.pouliquen@st.com>, <benjamin.gaignard@linaro.org>, Loic Pallardy <loic.pallardy@st.com> Subject: [PATCH v2 04/16] remoteproc: introduce rproc_find_carveout_by_da Date: Thu, 30 Nov 2017 17:46:39 +0100 [thread overview] Message-ID: <1512060411-729-5-git-send-email-loic.pallardy@st.com> (raw) In-Reply-To: <1512060411-729-1-git-send-email-loic.pallardy@st.com> This patch provides a new function to find a carveout according to a device address (da). If match found, this function returns CPU virtual address corresponding to specified da. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> --- drivers/remoteproc/remoteproc_core.c | 42 ++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 279320a..78525d1 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -211,6 +211,48 @@ void *rproc_da_to_va(struct rproc *rproc, u64 da, int len) } EXPORT_SYMBOL(rproc_da_to_va); +/** + * rproc_find_carveout_by_da() - lookup the carveout region for a remoteproc address + * @rproc: handle of a remote processor + * @da: remoteproc device address to find + * @len: length of the memory region @da is pointing to + * + * Platform driver has the capability to register some pre-allacoted carveout + * (physically contiguous memory regions) before rproc firmware loading and + * associated resource table analysis. These regions may be dedicated memory + * regions internal to the coprocessor or specified DDR region with specific + * attributes + * + * This function is a helper function with which we can go over the + * allocated carveouts and translate specific device addresse to virtual + * addresse so we can fill firmware resource table. + * + * The function returns a valid virtual address on success or NULL on failure. + */ +void *rproc_find_carveout_by_da(struct rproc *rproc, u64 da, int len) +{ + struct rproc_mem_entry *carveout; + void *va = NULL; + + list_for_each_entry(carveout, &rproc->carveouts, node) { + int offset = da - carveout->da; + + /* try next carveout if da is too small */ + if (offset < 0) + continue; + + /* try next carveout if da is too large */ + if (offset + len > carveout->len) + continue; + + va = carveout->va + offset; + + break; + } + + return va; +} + int rproc_alloc_vring(struct rproc_vdev *rvdev, int i) { struct rproc *rproc = rvdev->rproc; -- 1.9.1
next prev parent reply other threads:[~2017-11-30 16:46 UTC|newest] Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-11-30 16:46 [PATCH v2 00/16] remoteproc: add fixed memory region support Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-11-30 16:46 ` [PATCH v2 01/16] remoteproc: add rproc_va_to_pa function Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 0:30 ` Bjorn Andersson 2018-01-12 7:43 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 02/16] remoteproc: add release ops in rproc_mem_entry struct Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 0:34 ` Bjorn Andersson 2018-01-12 7:43 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 03/16] remoteproc: introduce rproc_add_carveout function Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 0:36 ` Bjorn Andersson 2018-01-12 7:45 ` Loic PALLARDY 2017-11-30 16:46 ` Loic Pallardy [this message] 2017-11-30 16:46 ` [PATCH v2 04/16] remoteproc: introduce rproc_find_carveout_by_da Loic Pallardy 2017-12-14 0:45 ` Bjorn Andersson 2018-01-12 7:48 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 05/16] remoteproc: modify rproc_handle_carveout to support preallocated region Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 0:59 ` Bjorn Andersson 2018-01-12 7:56 ` Loic PALLARDY 2018-10-23 17:40 ` Suman Anna 2018-10-23 19:09 ` Loic PALLARDY 2018-10-23 19:12 ` Suman Anna 2017-11-30 16:46 ` [PATCH v2 06/16] remoteproc: modify vring allocation " Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 1:09 ` Bjorn Andersson 2018-01-12 8:13 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 07/16] remoteproc: st: add reserved memory support Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 1:15 ` Bjorn Andersson 2018-01-12 8:19 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 08/16] remoteproc: add name in rproc_mem_entry struct Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 1:21 ` Bjorn Andersson 2018-01-12 8:19 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 09/16] remoteproc: add memory device management support Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-11-30 16:46 ` [PATCH v2 10/16] remoteproc: add memory device registering in rproc_add_carveout Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 1:29 ` Bjorn Andersson 2018-01-15 9:09 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 11/16] remoteproc: introduce rproc_find_carveout_by_name function Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 1:32 ` Bjorn Andersson 2018-01-15 9:10 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 12/16] remoteproc: look-up memory-device for vring allocation Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 1:44 ` Bjorn Andersson 2018-01-15 20:44 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 13/16] remoteproc: look-up memory-device for virtio device allocation Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 5:32 ` Bjorn Andersson 2018-01-15 20:57 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 14/16] remoteproc: look-up pre-registered carveout by name for carveout allocation Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 5:34 ` Bjorn Andersson 2018-01-15 20:59 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 15/16] remoteproc: st: associate memory device to memory regions Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy 2017-12-14 5:37 ` Bjorn Andersson 2018-01-15 21:04 ` Loic PALLARDY 2017-11-30 16:46 ` [PATCH v2 16/16] rpmsg: virtio: allocate buffer from parent Loic Pallardy 2017-11-30 16:46 ` Loic Pallardy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1512060411-729-5-git-send-email-loic.pallardy@st.com \ --to=loic.pallardy@st.com \ --cc=arnaud.pouliquen@st.com \ --cc=benjamin.gaignard@linaro.org \ --cc=bjorn.andersson@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-remoteproc@vger.kernel.org \ --cc=ohad@wizery.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.