All of lore.kernel.org
 help / color / mirror / Atom feed
From: Amelie Delaunay <amelie.delaunay@st.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Tony Prisk <linux@prisktech.co.nz>,
	Alan Stern <stern@rowland.harvard.edu>,
	"Roger Quadros" <rogerq@ti.com>,
	Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Amelie Delaunay <amelie.delaunay@st.com>
Subject: [PATCH v3] usb: host: ehci-platform: add support for optional external vbus supply
Date: Fri, 23 Feb 2018 14:46:51 +0100	[thread overview]
Message-ID: <1519393611-31367-1-git-send-email-amelie.delaunay@st.com> (raw)

On some boards, especially when vbus supply requires large current,
and the charge pump on the PHY isn't enough, an external vbus power switch
may be used.
Add support for optional external vbus supply per port in ehci-platform.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>

---
Changes in v3:
 * Address Felipe Balbi comments: reduce indentation in
   ehci_platform_port_power.
 * Address Roger Quadros and Alan Stern comments: platforms can have one
   external vbus supply per port, so add support to get as many optional
   regulator as implemented ports on the host controller.

Changes in v2:
 * Address Roger Quadros comments: move regulator_enable/disable from
   ehci_platform_power_on/off to ehci_platform_port_power.
---
 Documentation/devicetree/bindings/usb/usb-ehci.txt |  1 +
 drivers/usb/host/ehci-platform.c                   | 52 +++++++++++++++++++++-
 2 files changed, 52 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 3efde12..cd576db 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -19,6 +19,7 @@ Optional properties:
  - phys : phandle + phy specifier pair
  - phy-names : "usb"
  - resets : phandle + reset specifier pair
+ - portN_vbus-supply : phandle of regulator supplying vbus for port N
 
 Example (Sequoia 440EPx):
     ehci@e0000300 {
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index b065a96..8e9f201 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -29,6 +29,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -46,6 +47,7 @@ struct ehci_platform_priv {
 	struct reset_control *rsts;
 	struct phy **phys;
 	int num_phys;
+	struct regulator **vbus_supplies;
 	bool reset_on_resume;
 };
 
@@ -56,7 +58,8 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 	struct platform_device *pdev = to_platform_device(hcd->self.controller);
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	int retval;
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int portnum, n_ports, retval;
 
 	ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
 
@@ -71,11 +74,57 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 	if (retval)
 		return retval;
 
+	n_ports = HCS_N_PORTS(ehci->hcs_params);
+	priv->vbus_supplies = devm_kcalloc(&pdev->dev, n_ports,
+					   sizeof(struct regulator *),
+					   GFP_KERNEL);
+	if (!priv->vbus_supplies)
+		return -ENOMEM;
+
+	for (portnum = 0; portnum < n_ports; portnum++) {
+		struct regulator *vbus_supply;
+		char id[20];
+
+		sprintf(id, "port%d_vbus", portnum);
+
+		vbus_supply = devm_regulator_get_optional(&pdev->dev, id);
+		if (IS_ERR(vbus_supply)) {
+			retval = PTR_ERR(vbus_supply);
+			if (retval == -ENODEV)
+				priv->vbus_supplies[portnum] = NULL;
+			else
+				return retval;
+		} else {
+			priv->vbus_supplies[portnum] = vbus_supply;
+		}
+	}
+
 	if (pdata->no_io_watchdog)
 		ehci->need_io_watchdog = 0;
 	return 0;
 }
 
+static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum,
+				    bool enable)
+{
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int ret;
+
+	if (!priv->vbus_supplies[portnum])
+		return 0;
+
+	if (enable)
+		ret = regulator_enable(priv->vbus_supplies[portnum]);
+	else
+		ret = regulator_disable(priv->vbus_supplies[portnum]);
+	if (ret)
+		dev_err(hcd->self.controller,
+			"failed to %s vbus supply for port %d: %d\n",
+			enable ? "enable" : "disable", portnum, ret);
+
+	return ret;
+}
+
 static int ehci_platform_power_on(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
@@ -134,6 +183,7 @@ static struct hc_driver __read_mostly ehci_platform_hc_driver;
 static const struct ehci_driver_overrides platform_overrides __initconst = {
 	.reset =		ehci_platform_reset,
 	.extra_priv_size =	sizeof(struct ehci_platform_priv),
+	.port_power =		ehci_platform_port_power,
 };
 
 static struct usb_ehci_pdata ehci_platform_defaults = {
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Amelie Delaunay <amelie.delaunay@st.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Tony Prisk <linux@prisktech.co.nz>,
	Alan Stern <stern@rowland.harvard.edu>,
	Roger Quadros <rogerq@ti.com>,
	Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: devicetree@vger.kernel.org,
	Amelie Delaunay <amelie.delaunay@st.com>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] usb: host: ehci-platform: add support for optional external vbus supply
Date: Fri, 23 Feb 2018 14:46:51 +0100	[thread overview]
Message-ID: <1519393611-31367-1-git-send-email-amelie.delaunay@st.com> (raw)

On some boards, especially when vbus supply requires large current,
and the charge pump on the PHY isn't enough, an external vbus power switch
may be used.
Add support for optional external vbus supply per port in ehci-platform.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>

---
Changes in v3:
 * Address Felipe Balbi comments: reduce indentation in
   ehci_platform_port_power.
 * Address Roger Quadros and Alan Stern comments: platforms can have one
   external vbus supply per port, so add support to get as many optional
   regulator as implemented ports on the host controller.

Changes in v2:
 * Address Roger Quadros comments: move regulator_enable/disable from
   ehci_platform_power_on/off to ehci_platform_port_power.
---
 Documentation/devicetree/bindings/usb/usb-ehci.txt |  1 +
 drivers/usb/host/ehci-platform.c                   | 52 +++++++++++++++++++++-
 2 files changed, 52 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 3efde12..cd576db 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -19,6 +19,7 @@ Optional properties:
  - phys : phandle + phy specifier pair
  - phy-names : "usb"
  - resets : phandle + reset specifier pair
+ - portN_vbus-supply : phandle of regulator supplying vbus for port N
 
 Example (Sequoia 440EPx):
     ehci@e0000300 {
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index b065a96..8e9f201 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -29,6 +29,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -46,6 +47,7 @@ struct ehci_platform_priv {
 	struct reset_control *rsts;
 	struct phy **phys;
 	int num_phys;
+	struct regulator **vbus_supplies;
 	bool reset_on_resume;
 };
 
@@ -56,7 +58,8 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 	struct platform_device *pdev = to_platform_device(hcd->self.controller);
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	int retval;
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int portnum, n_ports, retval;
 
 	ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
 
@@ -71,11 +74,57 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 	if (retval)
 		return retval;
 
+	n_ports = HCS_N_PORTS(ehci->hcs_params);
+	priv->vbus_supplies = devm_kcalloc(&pdev->dev, n_ports,
+					   sizeof(struct regulator *),
+					   GFP_KERNEL);
+	if (!priv->vbus_supplies)
+		return -ENOMEM;
+
+	for (portnum = 0; portnum < n_ports; portnum++) {
+		struct regulator *vbus_supply;
+		char id[20];
+
+		sprintf(id, "port%d_vbus", portnum);
+
+		vbus_supply = devm_regulator_get_optional(&pdev->dev, id);
+		if (IS_ERR(vbus_supply)) {
+			retval = PTR_ERR(vbus_supply);
+			if (retval == -ENODEV)
+				priv->vbus_supplies[portnum] = NULL;
+			else
+				return retval;
+		} else {
+			priv->vbus_supplies[portnum] = vbus_supply;
+		}
+	}
+
 	if (pdata->no_io_watchdog)
 		ehci->need_io_watchdog = 0;
 	return 0;
 }
 
+static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum,
+				    bool enable)
+{
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int ret;
+
+	if (!priv->vbus_supplies[portnum])
+		return 0;
+
+	if (enable)
+		ret = regulator_enable(priv->vbus_supplies[portnum]);
+	else
+		ret = regulator_disable(priv->vbus_supplies[portnum]);
+	if (ret)
+		dev_err(hcd->self.controller,
+			"failed to %s vbus supply for port %d: %d\n",
+			enable ? "enable" : "disable", portnum, ret);
+
+	return ret;
+}
+
 static int ehci_platform_power_on(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
@@ -134,6 +183,7 @@ static struct hc_driver __read_mostly ehci_platform_hc_driver;
 static const struct ehci_driver_overrides platform_overrides __initconst = {
 	.reset =		ehci_platform_reset,
 	.extra_priv_size =	sizeof(struct ehci_platform_priv),
+	.port_power =		ehci_platform_port_power,
 };
 
 static struct usb_ehci_pdata ehci_platform_defaults = {
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Amelie Delaunay <amelie.delaunay@st.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Tony Prisk <linux@prisktech.co.nz>,
	Alan Stern <stern@rowland.harvard.edu>,
	Roger Quadros <rogerq@ti.com>,
	Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Amelie Delaunay <amelie.delaunay@st.com>
Subject: [v3] usb: host: ehci-platform: add support for optional external vbus supply
Date: Fri, 23 Feb 2018 14:46:51 +0100	[thread overview]
Message-ID: <1519393611-31367-1-git-send-email-amelie.delaunay@st.com> (raw)

On some boards, especially when vbus supply requires large current,
and the charge pump on the PHY isn't enough, an external vbus power switch
may be used.
Add support for optional external vbus supply per port in ehci-platform.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
Changes in v3:
 * Address Felipe Balbi comments: reduce indentation in
   ehci_platform_port_power.
 * Address Roger Quadros and Alan Stern comments: platforms can have one
   external vbus supply per port, so add support to get as many optional
   regulator as implemented ports on the host controller.

Changes in v2:
 * Address Roger Quadros comments: move regulator_enable/disable from
   ehci_platform_power_on/off to ehci_platform_port_power.
---
 Documentation/devicetree/bindings/usb/usb-ehci.txt |  1 +
 drivers/usb/host/ehci-platform.c                   | 52 +++++++++++++++++++++-
 2 files changed, 52 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 3efde12..cd576db 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -19,6 +19,7 @@ Optional properties:
  - phys : phandle + phy specifier pair
  - phy-names : "usb"
  - resets : phandle + reset specifier pair
+ - portN_vbus-supply : phandle of regulator supplying vbus for port N
 
 Example (Sequoia 440EPx):
     ehci@e0000300 {
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index b065a96..8e9f201 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -29,6 +29,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -46,6 +47,7 @@ struct ehci_platform_priv {
 	struct reset_control *rsts;
 	struct phy **phys;
 	int num_phys;
+	struct regulator **vbus_supplies;
 	bool reset_on_resume;
 };
 
@@ -56,7 +58,8 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 	struct platform_device *pdev = to_platform_device(hcd->self.controller);
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	int retval;
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int portnum, n_ports, retval;
 
 	ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
 
@@ -71,11 +74,57 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 	if (retval)
 		return retval;
 
+	n_ports = HCS_N_PORTS(ehci->hcs_params);
+	priv->vbus_supplies = devm_kcalloc(&pdev->dev, n_ports,
+					   sizeof(struct regulator *),
+					   GFP_KERNEL);
+	if (!priv->vbus_supplies)
+		return -ENOMEM;
+
+	for (portnum = 0; portnum < n_ports; portnum++) {
+		struct regulator *vbus_supply;
+		char id[20];
+
+		sprintf(id, "port%d_vbus", portnum);
+
+		vbus_supply = devm_regulator_get_optional(&pdev->dev, id);
+		if (IS_ERR(vbus_supply)) {
+			retval = PTR_ERR(vbus_supply);
+			if (retval == -ENODEV)
+				priv->vbus_supplies[portnum] = NULL;
+			else
+				return retval;
+		} else {
+			priv->vbus_supplies[portnum] = vbus_supply;
+		}
+	}
+
 	if (pdata->no_io_watchdog)
 		ehci->need_io_watchdog = 0;
 	return 0;
 }
 
+static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum,
+				    bool enable)
+{
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int ret;
+
+	if (!priv->vbus_supplies[portnum])
+		return 0;
+
+	if (enable)
+		ret = regulator_enable(priv->vbus_supplies[portnum]);
+	else
+		ret = regulator_disable(priv->vbus_supplies[portnum]);
+	if (ret)
+		dev_err(hcd->self.controller,
+			"failed to %s vbus supply for port %d: %d\n",
+			enable ? "enable" : "disable", portnum, ret);
+
+	return ret;
+}
+
 static int ehci_platform_power_on(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
@@ -134,6 +183,7 @@ static struct hc_driver __read_mostly ehci_platform_hc_driver;
 static const struct ehci_driver_overrides platform_overrides __initconst = {
 	.reset =		ehci_platform_reset,
 	.extra_priv_size =	sizeof(struct ehci_platform_priv),
+	.port_power =		ehci_platform_port_power,
 };
 
 static struct usb_ehci_pdata ehci_platform_defaults = {

WARNING: multiple messages have this Message-ID (diff)
From: amelie.delaunay@st.com (Amelie Delaunay)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] usb: host: ehci-platform: add support for optional external vbus supply
Date: Fri, 23 Feb 2018 14:46:51 +0100	[thread overview]
Message-ID: <1519393611-31367-1-git-send-email-amelie.delaunay@st.com> (raw)

On some boards, especially when vbus supply requires large current,
and the charge pump on the PHY isn't enough, an external vbus power switch
may be used.
Add support for optional external vbus supply per port in ehci-platform.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>

---
Changes in v3:
 * Address Felipe Balbi comments: reduce indentation in
   ehci_platform_port_power.
 * Address Roger Quadros and Alan Stern comments: platforms can have one
   external vbus supply per port, so add support to get as many optional
   regulator as implemented ports on the host controller.

Changes in v2:
 * Address Roger Quadros comments: move regulator_enable/disable from
   ehci_platform_power_on/off to ehci_platform_port_power.
---
 Documentation/devicetree/bindings/usb/usb-ehci.txt |  1 +
 drivers/usb/host/ehci-platform.c                   | 52 +++++++++++++++++++++-
 2 files changed, 52 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 3efde12..cd576db 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -19,6 +19,7 @@ Optional properties:
  - phys : phandle + phy specifier pair
  - phy-names : "usb"
  - resets : phandle + reset specifier pair
+ - portN_vbus-supply : phandle of regulator supplying vbus for port N
 
 Example (Sequoia 440EPx):
     ehci at e0000300 {
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index b065a96..8e9f201 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -29,6 +29,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -46,6 +47,7 @@ struct ehci_platform_priv {
 	struct reset_control *rsts;
 	struct phy **phys;
 	int num_phys;
+	struct regulator **vbus_supplies;
 	bool reset_on_resume;
 };
 
@@ -56,7 +58,8 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 	struct platform_device *pdev = to_platform_device(hcd->self.controller);
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	int retval;
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int portnum, n_ports, retval;
 
 	ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
 
@@ -71,11 +74,57 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 	if (retval)
 		return retval;
 
+	n_ports = HCS_N_PORTS(ehci->hcs_params);
+	priv->vbus_supplies = devm_kcalloc(&pdev->dev, n_ports,
+					   sizeof(struct regulator *),
+					   GFP_KERNEL);
+	if (!priv->vbus_supplies)
+		return -ENOMEM;
+
+	for (portnum = 0; portnum < n_ports; portnum++) {
+		struct regulator *vbus_supply;
+		char id[20];
+
+		sprintf(id, "port%d_vbus", portnum);
+
+		vbus_supply = devm_regulator_get_optional(&pdev->dev, id);
+		if (IS_ERR(vbus_supply)) {
+			retval = PTR_ERR(vbus_supply);
+			if (retval == -ENODEV)
+				priv->vbus_supplies[portnum] = NULL;
+			else
+				return retval;
+		} else {
+			priv->vbus_supplies[portnum] = vbus_supply;
+		}
+	}
+
 	if (pdata->no_io_watchdog)
 		ehci->need_io_watchdog = 0;
 	return 0;
 }
 
+static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum,
+				    bool enable)
+{
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int ret;
+
+	if (!priv->vbus_supplies[portnum])
+		return 0;
+
+	if (enable)
+		ret = regulator_enable(priv->vbus_supplies[portnum]);
+	else
+		ret = regulator_disable(priv->vbus_supplies[portnum]);
+	if (ret)
+		dev_err(hcd->self.controller,
+			"failed to %s vbus supply for port %d: %d\n",
+			enable ? "enable" : "disable", portnum, ret);
+
+	return ret;
+}
+
 static int ehci_platform_power_on(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
@@ -134,6 +183,7 @@ static struct hc_driver __read_mostly ehci_platform_hc_driver;
 static const struct ehci_driver_overrides platform_overrides __initconst = {
 	.reset =		ehci_platform_reset,
 	.extra_priv_size =	sizeof(struct ehci_platform_priv),
+	.port_power =		ehci_platform_port_power,
 };
 
 static struct usb_ehci_pdata ehci_platform_defaults = {
-- 
2.7.4

             reply	other threads:[~2018-02-23 13:47 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-23 13:46 Amelie Delaunay [this message]
2018-02-23 13:46 ` [PATCH v3] usb: host: ehci-platform: add support for optional external vbus supply Amelie Delaunay
2018-02-23 13:46 ` [v3] " Amelie Delaunay
2018-02-23 13:46 ` [PATCH v3] " Amelie Delaunay
2018-02-28 11:01 ` Roger Quadros
2018-02-28 11:01   ` Roger Quadros
2018-02-28 11:01   ` [v3] " Roger Quadros
2018-02-28 11:01   ` [PATCH v3] " Roger Quadros
2018-03-01  8:47   ` Amelie DELAUNAY
2018-03-01  8:47     ` Amelie DELAUNAY
2018-03-01  8:47     ` [v3] " Amelie Delaunay
2018-02-28 13:33 ` [PATCH v3] " Robin Murphy
2018-02-28 13:33   ` Robin Murphy
2018-02-28 13:33   ` [v3] " Robin Murphy
2018-03-01  8:49   ` [PATCH v3] " Amelie DELAUNAY
2018-03-01  8:49     ` Amelie DELAUNAY
2018-03-01  8:49     ` [v3] " Amelie Delaunay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1519393611-31367-1-git-send-email-amelie.delaunay@st.com \
    --to=amelie.delaunay@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=felipe.balbi@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@prisktech.co.nz \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=rogerq@ti.com \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.