From: Kalyan Thota <kalyan_t@codeaurora.org> To: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org, freedreno@lists.freedesktop.org, devicetree@vger.kernel.org Cc: Kalyan Thota <kalyan_t@codeaurora.org>, linux-kernel@vger.kernel.org, robdclark@gmail.com, seanpaul@chromium.org, hoegsberg@chromium.org, dianders@chromium.org, jsanka@codeaurora.org, mkrishn@codeaurora.org, travitej@codeaurora.org, nganji@codeaurora.org Subject: [PATCH] drm/msm/dpu: ensure device suspend happens during PM sleep Date: Fri, 1 May 2020 19:01:03 +0530 [thread overview] Message-ID: <1588339863-1322-1-git-send-email-kalyan_t@codeaurora.org> (raw) "The PM core always increments the runtime usage counter before calling the ->suspend() callback and decrements it after calling the ->resume() callback" DPU and DSI are managed as runtime devices. When suspend is triggered, PM core adds a refcount on all the devices and calls device suspend, since usage count is already incremented, runtime suspend was not getting called and it kept the clocks on which resulted in target not entering into XO shutdown. Add changes to force suspend on runtime devices during pm sleep. Changes in v1: - Remove unnecessary checks in the function _dpu_kms_disable_dpu (Rob Clark). Changes in v2: - Avoid using suspend_late to reset the usagecount as suspend_late might not be called during suspend call failures (Doug). Changes in v3: - Use force suspend instead of managing device usage_count via runtime put and get API's to trigger callbacks (Doug). Changes in v4: - Check the return values of pm_runtime_force_suspend and pm_runtime_force_resume API's and pass appropriately (Doug). Changes in v5: - With v4 patch, test cycle has uncovered issues in device resume. On bubs: cmd tx failures were seen as SW is sending panel off commands when the dsi resources are turned off. Upon suspend, DRM driver will issue a NULL composition to the dpu, followed by turning off all the HW blocks. v5 changes will serialize the NULL commit and resource unwinding by handling them under PM prepare and PM complete phases there by ensuring that clks are on when panel off commands are being processed. Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++ drivers/gpu/drm/msm/dsi/dsi.c | 2 ++ drivers/gpu/drm/msm/msm_drv.c | 20 ++++++++++++++++---- 3 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index ce19f1d..b886d9d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1123,6 +1123,8 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) static const struct dev_pm_ops dpu_pm_ops = { SET_RUNTIME_PM_OPS(dpu_runtime_suspend, dpu_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) }; static const struct of_device_id dpu_dt_match[] = { diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c index 55ea4bc2..62704885 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.c +++ b/drivers/gpu/drm/msm/dsi/dsi.c @@ -161,6 +161,8 @@ static int dsi_dev_remove(struct platform_device *pdev) static const struct dev_pm_ops dsi_pm_ops = { SET_RUNTIME_PM_OPS(msm_dsi_runtime_suspend, msm_dsi_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) }; static struct platform_driver dsi_driver = { diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 7d985f8..47d492b 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1036,7 +1036,7 @@ static int msm_ioctl_submitqueue_close(struct drm_device *dev, void *data, }; #ifdef CONFIG_PM_SLEEP -static int msm_pm_suspend(struct device *dev) +static int msm_pm_prepare(struct device *dev) { struct drm_device *ddev = dev_get_drvdata(dev); struct msm_drm_private *priv = ddev->dev_private; @@ -1054,18 +1054,28 @@ static int msm_pm_suspend(struct device *dev) return 0; } -static int msm_pm_resume(struct device *dev) +static void msm_pm_complete(struct device *dev) { struct drm_device *ddev = dev_get_drvdata(dev); struct msm_drm_private *priv = ddev->dev_private; int ret; if (WARN_ON(!priv->pm_state)) - return -ENOENT; + return; ret = drm_atomic_helper_resume(ddev, priv->pm_state); if (!ret) priv->pm_state = NULL; +} + +static int msm_pm_resume(struct device *dev) +{ + int ret; + + /* unwind runtime_disable called by force suspend */ + pm_runtime_enable(dev); + + ret = pm_runtime_resume(dev); return ret; } @@ -1102,8 +1112,10 @@ static int msm_runtime_resume(struct device *dev) #endif static const struct dev_pm_ops msm_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(msm_pm_suspend, msm_pm_resume) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, msm_pm_resume) SET_RUNTIME_PM_OPS(msm_runtime_suspend, msm_runtime_resume, NULL) + .prepare = msm_pm_prepare, + .complete = msm_pm_complete, }; /* -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Kalyan Thota <kalyan_t@codeaurora.org> To: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org, freedreno@lists.freedesktop.org, devicetree@vger.kernel.org Cc: mkrishn@codeaurora.org, travitej@codeaurora.org, dianders@chromium.org, linux-kernel@vger.kernel.org, seanpaul@chromium.org, Kalyan Thota <kalyan_t@codeaurora.org>, hoegsberg@chromium.org Subject: [PATCH] drm/msm/dpu: ensure device suspend happens during PM sleep Date: Fri, 1 May 2020 19:01:03 +0530 [thread overview] Message-ID: <1588339863-1322-1-git-send-email-kalyan_t@codeaurora.org> (raw) "The PM core always increments the runtime usage counter before calling the ->suspend() callback and decrements it after calling the ->resume() callback" DPU and DSI are managed as runtime devices. When suspend is triggered, PM core adds a refcount on all the devices and calls device suspend, since usage count is already incremented, runtime suspend was not getting called and it kept the clocks on which resulted in target not entering into XO shutdown. Add changes to force suspend on runtime devices during pm sleep. Changes in v1: - Remove unnecessary checks in the function _dpu_kms_disable_dpu (Rob Clark). Changes in v2: - Avoid using suspend_late to reset the usagecount as suspend_late might not be called during suspend call failures (Doug). Changes in v3: - Use force suspend instead of managing device usage_count via runtime put and get API's to trigger callbacks (Doug). Changes in v4: - Check the return values of pm_runtime_force_suspend and pm_runtime_force_resume API's and pass appropriately (Doug). Changes in v5: - With v4 patch, test cycle has uncovered issues in device resume. On bubs: cmd tx failures were seen as SW is sending panel off commands when the dsi resources are turned off. Upon suspend, DRM driver will issue a NULL composition to the dpu, followed by turning off all the HW blocks. v5 changes will serialize the NULL commit and resource unwinding by handling them under PM prepare and PM complete phases there by ensuring that clks are on when panel off commands are being processed. Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++ drivers/gpu/drm/msm/dsi/dsi.c | 2 ++ drivers/gpu/drm/msm/msm_drv.c | 20 ++++++++++++++++---- 3 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index ce19f1d..b886d9d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1123,6 +1123,8 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev) static const struct dev_pm_ops dpu_pm_ops = { SET_RUNTIME_PM_OPS(dpu_runtime_suspend, dpu_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) }; static const struct of_device_id dpu_dt_match[] = { diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c index 55ea4bc2..62704885 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.c +++ b/drivers/gpu/drm/msm/dsi/dsi.c @@ -161,6 +161,8 @@ static int dsi_dev_remove(struct platform_device *pdev) static const struct dev_pm_ops dsi_pm_ops = { SET_RUNTIME_PM_OPS(msm_dsi_runtime_suspend, msm_dsi_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) }; static struct platform_driver dsi_driver = { diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 7d985f8..47d492b 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1036,7 +1036,7 @@ static int msm_ioctl_submitqueue_close(struct drm_device *dev, void *data, }; #ifdef CONFIG_PM_SLEEP -static int msm_pm_suspend(struct device *dev) +static int msm_pm_prepare(struct device *dev) { struct drm_device *ddev = dev_get_drvdata(dev); struct msm_drm_private *priv = ddev->dev_private; @@ -1054,18 +1054,28 @@ static int msm_pm_suspend(struct device *dev) return 0; } -static int msm_pm_resume(struct device *dev) +static void msm_pm_complete(struct device *dev) { struct drm_device *ddev = dev_get_drvdata(dev); struct msm_drm_private *priv = ddev->dev_private; int ret; if (WARN_ON(!priv->pm_state)) - return -ENOENT; + return; ret = drm_atomic_helper_resume(ddev, priv->pm_state); if (!ret) priv->pm_state = NULL; +} + +static int msm_pm_resume(struct device *dev) +{ + int ret; + + /* unwind runtime_disable called by force suspend */ + pm_runtime_enable(dev); + + ret = pm_runtime_resume(dev); return ret; } @@ -1102,8 +1112,10 @@ static int msm_runtime_resume(struct device *dev) #endif static const struct dev_pm_ops msm_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(msm_pm_suspend, msm_pm_resume) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, msm_pm_resume) SET_RUNTIME_PM_OPS(msm_runtime_suspend, msm_runtime_resume, NULL) + .prepare = msm_pm_prepare, + .complete = msm_pm_complete, }; /* -- 1.9.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2020-05-01 13:56 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-01 13:31 Kalyan Thota [this message] 2020-05-01 13:31 ` [PATCH] drm/msm/dpu: ensure device suspend happens during PM sleep Kalyan Thota 2020-05-14 16:17 ` Doug Anderson 2020-05-14 16:17 ` Doug Anderson 2020-05-15 12:05 ` [Freedreno] " kalyan_t 2020-05-15 12:05 ` kalyan_t 2020-05-15 16:37 ` Doug Anderson 2020-05-15 16:37 ` Doug Anderson 2020-05-27 22:11 ` Doug Anderson 2020-05-27 22:11 ` Doug Anderson 2020-06-04 11:19 ` kalyan_t 2020-06-04 11:19 ` kalyan_t -- strict thread matches above, loose matches on Subject: below -- 2020-04-17 7:12 Kalyan Thota 2020-04-17 7:12 ` Kalyan Thota 2020-04-17 20:56 ` Doug Anderson 2020-04-17 20:56 ` Doug Anderson 2020-03-31 13:58 Kalyan Thota 2020-03-31 13:58 ` Kalyan Thota 2020-03-31 16:00 ` Doug Anderson 2020-03-31 16:00 ` Doug Anderson 2020-04-01 9:32 ` kalyan_t 2020-04-01 9:32 ` kalyan_t 2020-03-30 9:03 Kalyan Thota 2020-03-30 9:03 ` Kalyan Thota 2020-03-30 18:55 ` Doug Anderson 2020-03-30 18:55 ` Doug Anderson 2020-03-23 6:13 Kalyan Thota 2020-03-23 6:13 ` Kalyan Thota 2020-03-24 14:35 ` Doug Anderson 2020-03-24 14:35 ` Doug Anderson 2020-03-25 15:40 ` Rob Clark 2020-03-25 15:40 ` Rob Clark 2020-03-25 15:50 ` Doug Anderson 2020-03-25 15:50 ` Doug Anderson 2020-03-25 20:03 ` kalyan_t 2020-03-25 20:03 ` kalyan_t 2020-03-16 11:05 Kalyan Thota 2020-03-16 11:05 ` Kalyan Thota 2020-03-16 16:38 ` Rob Clark 2020-03-16 16:38 ` Rob Clark 2020-03-17 21:38 ` Doug Anderson 2020-03-17 21:38 ` Doug Anderson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1588339863-1322-1-git-send-email-kalyan_t@codeaurora.org \ --to=kalyan_t@codeaurora.org \ --cc=devicetree@vger.kernel.org \ --cc=dianders@chromium.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=freedreno@lists.freedesktop.org \ --cc=hoegsberg@chromium.org \ --cc=jsanka@codeaurora.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mkrishn@codeaurora.org \ --cc=nganji@codeaurora.org \ --cc=robdclark@gmail.com \ --cc=seanpaul@chromium.org \ --cc=travitej@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.