From: dillon.minfei@gmail.com
To: robh+dt@kernel.org, p.zabel@pengutronix.de,
mcoquelin.stm32@gmail.com, broonie@kernel.org,
devicetree@vger.kernel.org, alexandre.torgue@st.com,
thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
daniel@ffwll.ch, mturquette@baylibre.com, sboyd@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
dri-devel@lists.freedesktop.org, linux-clk@vger.kernel.org,
dillon min <dillon.minfei@gmail.com>
Subject: [PATCH v4 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
Date: Mon, 18 May 2020 19:09:17 +0800 [thread overview]
Message-ID: <1589800165-3271-1-git-send-email-dillon.minfei@gmail.com> (raw)
From: dillon min <dillon.minfei@gmail.com>
According to alexandre torgue's suggestion, combine ili9341 and
l3gd20's modification on stm32f429-disco board to one patchset.
Changes:
ili9341:
V4:
1 update ili9341 panel driver according to Linus's suggestion
2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4
3 merge l3gd20's change to this patchset
V3:
1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c
to support serial spi & parallel rgb interface in one driver.
2 update ilitek,ili9341.yaml dts binding documentation.
3 update stm32f429-disco dts binding
V2:
1 verify ilitek,ili9341.yaml with make O=../linux-stm32
dt_binding_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/
ilitek,ili9341.yaml
V1:
1 add ili9341 drm panel driver
2 add ltdc, spi5 controller for stm32f429-disco
3 add ltdc, spi5 pin map for stm32f429-disco
4 add docs about ili9341
5 fix ltdc driver loading hang in clk set rate bug
L3gd20:
V3:
1, merge stm32f429-disco dtbs binding with ili9341 part
V2:
1, insert blank line at stm32f420-disco.dts line 143
2, add more description for l3gd20 in commit message
V1:
1, enable spi5 controller on stm32f429-disco (dts)
2, add spi5 pinmap for stm32f429-disco (dts)
3, add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4
dillon min (8):
ARM: dts: stm32: Add dma config for spi5
ARM: dts: stm32: enable l3gd20 on stm32429-disco board
spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
ARM: dts: stm32: Add pin map for ltdc on stm32f429-disco board
dt-bindings: display: panel: Add ilitek ili9341 panel bindings
ARM: dts: stm32: enable ltdc binding with ili9341 on stm32429-disco
board
clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate.
drm/panel: Add ilitek ili9341 panel driver
.../bindings/display/panel/ilitek,ili9341.yaml | 69 ++
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 +
arch/arm/boot/dts/stm32f429-disco.dts | 48 +
arch/arm/boot/dts/stm32f429.dtsi | 3 +
drivers/clk/clk-stm32f4.c | 7 +-
drivers/gpu/drm/panel/Kconfig | 12 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1301 ++++++++++++++++++++
drivers/spi/spi-stm32.c | 30 +-
9 files changed, 1530 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: dillon.minfei@gmail.com
To: robh+dt@kernel.org, p.zabel@pengutronix.de,
mcoquelin.stm32@gmail.com, broonie@kernel.org,
devicetree@vger.kernel.org, alexandre.torgue@st.com,
thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
daniel@ffwll.ch, mturquette@baylibre.com, sboyd@kernel.org
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-spi@vger.kernel.org, dillon min <dillon.minfei@gmail.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
Date: Mon, 18 May 2020 19:09:17 +0800 [thread overview]
Message-ID: <1589800165-3271-1-git-send-email-dillon.minfei@gmail.com> (raw)
From: dillon min <dillon.minfei@gmail.com>
According to alexandre torgue's suggestion, combine ili9341 and
l3gd20's modification on stm32f429-disco board to one patchset.
Changes:
ili9341:
V4:
1 update ili9341 panel driver according to Linus's suggestion
2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4
3 merge l3gd20's change to this patchset
V3:
1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c
to support serial spi & parallel rgb interface in one driver.
2 update ilitek,ili9341.yaml dts binding documentation.
3 update stm32f429-disco dts binding
V2:
1 verify ilitek,ili9341.yaml with make O=../linux-stm32
dt_binding_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/
ilitek,ili9341.yaml
V1:
1 add ili9341 drm panel driver
2 add ltdc, spi5 controller for stm32f429-disco
3 add ltdc, spi5 pin map for stm32f429-disco
4 add docs about ili9341
5 fix ltdc driver loading hang in clk set rate bug
L3gd20:
V3:
1, merge stm32f429-disco dtbs binding with ili9341 part
V2:
1, insert blank line at stm32f420-disco.dts line 143
2, add more description for l3gd20 in commit message
V1:
1, enable spi5 controller on stm32f429-disco (dts)
2, add spi5 pinmap for stm32f429-disco (dts)
3, add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4
dillon min (8):
ARM: dts: stm32: Add dma config for spi5
ARM: dts: stm32: enable l3gd20 on stm32429-disco board
spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
ARM: dts: stm32: Add pin map for ltdc on stm32f429-disco board
dt-bindings: display: panel: Add ilitek ili9341 panel bindings
ARM: dts: stm32: enable ltdc binding with ili9341 on stm32429-disco
board
clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate.
drm/panel: Add ilitek ili9341 panel driver
.../bindings/display/panel/ilitek,ili9341.yaml | 69 ++
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 +
arch/arm/boot/dts/stm32f429-disco.dts | 48 +
arch/arm/boot/dts/stm32f429.dtsi | 3 +
drivers/clk/clk-stm32f4.c | 7 +-
drivers/gpu/drm/panel/Kconfig | 12 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1301 ++++++++++++++++++++
drivers/spi/spi-stm32.c | 30 +-
9 files changed, 1530 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: dillon.minfei@gmail.com
To: robh+dt@kernel.org, p.zabel@pengutronix.de,
mcoquelin.stm32@gmail.com, broonie@kernel.org,
devicetree@vger.kernel.org, alexandre.torgue@st.com,
thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
daniel@ffwll.ch, mturquette@baylibre.com, sboyd@kernel.org
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-spi@vger.kernel.org, dillon min <dillon.minfei@gmail.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
Date: Mon, 18 May 2020 19:09:17 +0800 [thread overview]
Message-ID: <1589800165-3271-1-git-send-email-dillon.minfei@gmail.com> (raw)
From: dillon min <dillon.minfei@gmail.com>
According to alexandre torgue's suggestion, combine ili9341 and
l3gd20's modification on stm32f429-disco board to one patchset.
Changes:
ili9341:
V4:
1 update ili9341 panel driver according to Linus's suggestion
2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4
3 merge l3gd20's change to this patchset
V3:
1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c
to support serial spi & parallel rgb interface in one driver.
2 update ilitek,ili9341.yaml dts binding documentation.
3 update stm32f429-disco dts binding
V2:
1 verify ilitek,ili9341.yaml with make O=../linux-stm32
dt_binding_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/
ilitek,ili9341.yaml
V1:
1 add ili9341 drm panel driver
2 add ltdc, spi5 controller for stm32f429-disco
3 add ltdc, spi5 pin map for stm32f429-disco
4 add docs about ili9341
5 fix ltdc driver loading hang in clk set rate bug
L3gd20:
V3:
1, merge stm32f429-disco dtbs binding with ili9341 part
V2:
1, insert blank line at stm32f420-disco.dts line 143
2, add more description for l3gd20 in commit message
V1:
1, enable spi5 controller on stm32f429-disco (dts)
2, add spi5 pinmap for stm32f429-disco (dts)
3, add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4
dillon min (8):
ARM: dts: stm32: Add dma config for spi5
ARM: dts: stm32: enable l3gd20 on stm32429-disco board
spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
ARM: dts: stm32: Add pin map for ltdc on stm32f429-disco board
dt-bindings: display: panel: Add ilitek ili9341 panel bindings
ARM: dts: stm32: enable ltdc binding with ili9341 on stm32429-disco
board
clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate.
drm/panel: Add ilitek ili9341 panel driver
.../bindings/display/panel/ilitek,ili9341.yaml | 69 ++
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 +
arch/arm/boot/dts/stm32f429-disco.dts | 48 +
arch/arm/boot/dts/stm32f429.dtsi | 3 +
drivers/clk/clk-stm32f4.c | 7 +-
drivers/gpu/drm/panel/Kconfig | 12 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1301 ++++++++++++++++++++
drivers/spi/spi-stm32.c | 30 +-
9 files changed, 1530 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2020-05-18 11:09 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-18 11:09 dillon.minfei [this message]
2020-05-18 11:09 ` [PATCH v4 0/8] Enable ili9341 and l3gd20 on stm32f429-disco dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` [PATCH v4 1/8] ARM: dts: stm32: Add dma config for spi5 dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` [PATCH v4 2/8] ARM: dts: stm32: enable l3gd20 on stm32429-disco board dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` [PATCH v4 3/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4 dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-22 11:36 ` Mark Brown
2020-05-22 11:36 ` Mark Brown
2020-05-22 11:36 ` Mark Brown
2020-05-22 14:57 ` dillon min
2020-05-22 14:57 ` dillon min
2020-05-22 14:57 ` dillon min
2020-05-22 15:59 ` dillon min
2020-05-22 15:59 ` dillon min
2020-05-22 15:59 ` dillon min
2020-05-22 16:29 ` Mark Brown
2020-05-22 16:29 ` Mark Brown
2020-05-22 16:29 ` Mark Brown
2020-05-23 1:35 ` dillon min
2020-05-23 1:35 ` dillon min
2020-05-23 1:35 ` dillon min
2020-05-25 11:43 ` Mark Brown
2020-05-25 11:43 ` Mark Brown
2020-05-25 11:43 ` Mark Brown
2020-05-18 11:09 ` [PATCH v4 4/8] ARM: dts: stm32: Add pin map for ltdc on stm32f429-disco board dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` [PATCH v4 5/8] dt-bindings: display: panel: Add ilitek ili9341 panel bindings dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-28 20:49 ` Rob Herring
2020-05-28 20:49 ` Rob Herring
2020-05-28 20:49 ` Rob Herring
2020-05-18 11:09 ` [PATCH v4 6/8] ARM: dts: stm32: enable ltdc binding with ili9341 on stm32429-disco board dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` [PATCH v4 7/8] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` [PATCH v4 8/8] drm/panel: Add ilitek ili9341 panel driver dillon.minfei
2020-05-18 11:09 ` dillon.minfei
2020-05-18 11:09 ` dillon.minfei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1589800165-3271-1-git-send-email-dillon.minfei@gmail.com \
--to=dillon.minfei@gmail.com \
--cc=airlied@linux.ie \
--cc=alexandre.torgue@st.com \
--cc=broonie@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=sboyd@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.