From: Kalle Valo <kvalo@codeaurora.org> To: ath11k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Subject: [PATCH 8/8] ath11k: remove unnecessary casts to u32 Date: Thu, 1 Oct 2020 12:34:50 +0300 [thread overview] Message-ID: <1601544890-13450-9-git-send-email-kvalo@codeaurora.org> (raw) In-Reply-To: <1601544890-13450-1-git-send-email-kvalo@codeaurora.org> These casts are not needed. No changes in functionality. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> --- drivers/net/wireless/ath/ath11k/hal.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c index 20f9cebc86d2..9904c0eb7587 100644 --- a/drivers/net/wireless/ath/ath11k/hal.c +++ b/drivers/net/wireless/ath/ath11k/hal.c @@ -330,7 +330,7 @@ static void ath11k_hal_srng_dst_hw_init(struct ath11k_base *ab, if (srng->flags & HAL_SRNG_FLAGS_MSI_INTR) { ath11k_hif_write32(ab, reg_base + HAL_REO1_RING_MSI1_BASE_LSB_OFFSET(ab), - (u32)srng->msi_addr); + srng->msi_addr); val = FIELD_PREP(HAL_REO1_RING_MSI1_BASE_MSB_ADDR, ((u64)srng->msi_addr >> @@ -344,7 +344,7 @@ static void ath11k_hal_srng_dst_hw_init(struct ath11k_base *ab, srng->msi_data); } - ath11k_hif_write32(ab, reg_base, (u32)srng->ring_base_paddr); + ath11k_hif_write32(ab, reg_base, srng->ring_base_paddr); val = FIELD_PREP(HAL_REO1_RING_BASE_MSB_RING_BASE_ADDR_MSB, ((u64)srng->ring_base_paddr >> @@ -409,7 +409,7 @@ static void ath11k_hal_srng_src_hw_init(struct ath11k_base *ab, if (srng->flags & HAL_SRNG_FLAGS_MSI_INTR) { ath11k_hif_write32(ab, reg_base + HAL_TCL1_RING_MSI1_BASE_LSB_OFFSET(ab), - (u32)srng->msi_addr); + srng->msi_addr); val = FIELD_PREP(HAL_TCL1_RING_MSI1_BASE_MSB_ADDR, ((u64)srng->msi_addr >> @@ -424,7 +424,7 @@ static void ath11k_hal_srng_src_hw_init(struct ath11k_base *ab, srng->msi_data); } - ath11k_hif_write32(ab, reg_base, (u32)srng->ring_base_paddr); + ath11k_hif_write32(ab, reg_base, srng->ring_base_paddr); val = FIELD_PREP(HAL_TCL1_RING_BASE_MSB_RING_BASE_ADDR_MSB, ((u64)srng->ring_base_paddr >> -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@codeaurora.org> To: ath11k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Subject: [PATCH 8/8] ath11k: remove unnecessary casts to u32 Date: Thu, 1 Oct 2020 12:34:50 +0300 [thread overview] Message-ID: <1601544890-13450-9-git-send-email-kvalo@codeaurora.org> (raw) In-Reply-To: <1601544890-13450-1-git-send-email-kvalo@codeaurora.org> These casts are not needed. No changes in functionality. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> --- drivers/net/wireless/ath/ath11k/hal.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c index 20f9cebc86d2..9904c0eb7587 100644 --- a/drivers/net/wireless/ath/ath11k/hal.c +++ b/drivers/net/wireless/ath/ath11k/hal.c @@ -330,7 +330,7 @@ static void ath11k_hal_srng_dst_hw_init(struct ath11k_base *ab, if (srng->flags & HAL_SRNG_FLAGS_MSI_INTR) { ath11k_hif_write32(ab, reg_base + HAL_REO1_RING_MSI1_BASE_LSB_OFFSET(ab), - (u32)srng->msi_addr); + srng->msi_addr); val = FIELD_PREP(HAL_REO1_RING_MSI1_BASE_MSB_ADDR, ((u64)srng->msi_addr >> @@ -344,7 +344,7 @@ static void ath11k_hal_srng_dst_hw_init(struct ath11k_base *ab, srng->msi_data); } - ath11k_hif_write32(ab, reg_base, (u32)srng->ring_base_paddr); + ath11k_hif_write32(ab, reg_base, srng->ring_base_paddr); val = FIELD_PREP(HAL_REO1_RING_BASE_MSB_RING_BASE_ADDR_MSB, ((u64)srng->ring_base_paddr >> @@ -409,7 +409,7 @@ static void ath11k_hal_srng_src_hw_init(struct ath11k_base *ab, if (srng->flags & HAL_SRNG_FLAGS_MSI_INTR) { ath11k_hif_write32(ab, reg_base + HAL_TCL1_RING_MSI1_BASE_LSB_OFFSET(ab), - (u32)srng->msi_addr); + srng->msi_addr); val = FIELD_PREP(HAL_TCL1_RING_MSI1_BASE_MSB_ADDR, ((u64)srng->msi_addr >> @@ -424,7 +424,7 @@ static void ath11k_hal_srng_src_hw_init(struct ath11k_base *ab, srng->msi_data); } - ath11k_hif_write32(ab, reg_base, (u32)srng->ring_base_paddr); + ath11k_hif_write32(ab, reg_base, srng->ring_base_paddr); val = FIELD_PREP(HAL_TCL1_RING_BASE_MSB_RING_BASE_ADDR_MSB, ((u64)srng->ring_base_paddr >> -- 2.7.4 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2020-10-01 9:35 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-01 9:34 [PATCH 0/8] ath11k: enable shadow register for QCA6390 Kalle Valo 2020-10-01 9:34 ` Kalle Valo 2020-10-01 9:34 ` [PATCH 1/8] ath11k: read and write registers below unwindowed address Kalle Valo 2020-10-01 9:34 ` Kalle Valo 2020-10-01 19:33 ` Kalle Valo 2020-10-01 19:33 ` Kalle Valo 2020-10-01 9:34 ` [PATCH 2/8] ath11k: enable shadow register configuration and access Kalle Valo 2020-10-01 9:34 ` Kalle Valo 2020-10-01 9:34 ` [PATCH 3/8] ath11k: set WMI pipe credit to 1 for QCA6390 Kalle Valo 2020-10-01 9:34 ` Kalle Valo 2020-10-01 9:34 ` [PATCH 4/8] ath11k: start a timer to update TCL HP Kalle Valo 2020-10-01 9:34 ` Kalle Valo 2020-10-01 9:34 ` [PATCH 5/8] ath11k: start a timer to update REO cmd ring Kalle Valo 2020-10-01 9:34 ` Kalle Valo 2020-10-01 9:34 ` [PATCH 6/8] ath11k: start a timer to update HP for CE pipe 4 Kalle Valo 2020-10-01 9:34 ` Kalle Valo 2020-10-01 9:34 ` [PATCH 7/8] ath11k: enable idle power save mode Kalle Valo 2020-10-01 9:34 ` Kalle Valo 2020-10-01 9:34 ` Kalle Valo [this message] 2020-10-01 9:34 ` [PATCH 8/8] ath11k: remove unnecessary casts to u32 Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1601544890-13450-9-git-send-email-kvalo@codeaurora.org \ --to=kvalo@codeaurora.org \ --cc=ath11k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.