From: Qi Liu <liuqi115@huawei.com>
To: <will@kernel.org>, <mark.rutland@arm.com>, <bhelgaas@google.com>
Cc: <linux-pci@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linuxarm@huawei.com>,
<zhangshaokun@hisilicon.com>
Subject: [PATCH v4 0/2] drivers/perf: hisi: Add support for PCIe PMU
Date: Wed, 19 May 2021 17:48:59 +0800 [thread overview]
Message-ID: <1621417741-5229-1-git-send-email-liuqi115@huawei.com> (raw)
This patchset adds support for HiSilicon PCIe Performance Monitoring
Unit(PMU). It is a PCIe Root Complex integrated End Point(RCiEP) device
added on Hip09. Each PCIe Core has a PMU RCiEP to monitor multi root
ports and all Endpoints downstream these root ports.
HiSilicon PCIe PMU is supported to collect performance data of PCIe bus,
such as: bandwidth, latency etc.
This patchset is based on 5.13-rc1.
Changes since v3:
- Fix some warnings when build under 32bits architecture.
- Address the comments from John.
- Link: https://lore.kernel.org/linux-arm-kernel/1618490885-44612-1-git-send-email-liuqi115@huawei.com/
Changes since v2:
- Address the comments from John.
- Link: https://lore.kernel.org/linux-arm-kernel/1617959157-22956-1-git-send-email-liuqi115@huawei.com/
Changes since v1:
- Drop the internal Reviewed-by tag.
- Fix some build warnings when W=1.
- Link: https://lore.kernel.org/linux-arm-kernel/1617788943-52722-1-git-send-email-liuqi115@huawei.com/
Qi Liu (2):
docs: perf: Add description for HiSilicon PCIe PMU driver
drivers/perf: hisi: Add driver for HiSilicon PCIe PMU
Documentation/admin-guide/perf/hisi-pcie-pmu.rst | 104 +++
MAINTAINERS | 6 +
drivers/perf/Kconfig | 2 +
drivers/perf/Makefile | 1 +
drivers/perf/pci/Kconfig | 16 +
drivers/perf/pci/Makefile | 2 +
drivers/perf/pci/hisilicon/Makefile | 3 +
drivers/perf/pci/hisilicon/hisi_pcie_pmu.c | 1016 ++++++++++++++++++++++
include/linux/cpuhotplug.h | 1 +
9 files changed, 1151 insertions(+)
create mode 100644 Documentation/admin-guide/perf/hisi-pcie-pmu.rst
create mode 100644 drivers/perf/pci/Kconfig
create mode 100644 drivers/perf/pci/Makefile
create mode 100644 drivers/perf/pci/hisilicon/Makefile
create mode 100644 drivers/perf/pci/hisilicon/hisi_pcie_pmu.c
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Qi Liu <liuqi115@huawei.com>
To: <will@kernel.org>, <mark.rutland@arm.com>, <bhelgaas@google.com>
Cc: <linux-pci@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linuxarm@huawei.com>,
<zhangshaokun@hisilicon.com>
Subject: [PATCH v4 0/2] drivers/perf: hisi: Add support for PCIe PMU
Date: Wed, 19 May 2021 17:48:59 +0800 [thread overview]
Message-ID: <1621417741-5229-1-git-send-email-liuqi115@huawei.com> (raw)
This patchset adds support for HiSilicon PCIe Performance Monitoring
Unit(PMU). It is a PCIe Root Complex integrated End Point(RCiEP) device
added on Hip09. Each PCIe Core has a PMU RCiEP to monitor multi root
ports and all Endpoints downstream these root ports.
HiSilicon PCIe PMU is supported to collect performance data of PCIe bus,
such as: bandwidth, latency etc.
This patchset is based on 5.13-rc1.
Changes since v3:
- Fix some warnings when build under 32bits architecture.
- Address the comments from John.
- Link: https://lore.kernel.org/linux-arm-kernel/1618490885-44612-1-git-send-email-liuqi115@huawei.com/
Changes since v2:
- Address the comments from John.
- Link: https://lore.kernel.org/linux-arm-kernel/1617959157-22956-1-git-send-email-liuqi115@huawei.com/
Changes since v1:
- Drop the internal Reviewed-by tag.
- Fix some build warnings when W=1.
- Link: https://lore.kernel.org/linux-arm-kernel/1617788943-52722-1-git-send-email-liuqi115@huawei.com/
Qi Liu (2):
docs: perf: Add description for HiSilicon PCIe PMU driver
drivers/perf: hisi: Add driver for HiSilicon PCIe PMU
Documentation/admin-guide/perf/hisi-pcie-pmu.rst | 104 +++
MAINTAINERS | 6 +
drivers/perf/Kconfig | 2 +
drivers/perf/Makefile | 1 +
drivers/perf/pci/Kconfig | 16 +
drivers/perf/pci/Makefile | 2 +
drivers/perf/pci/hisilicon/Makefile | 3 +
drivers/perf/pci/hisilicon/hisi_pcie_pmu.c | 1016 ++++++++++++++++++++++
include/linux/cpuhotplug.h | 1 +
9 files changed, 1151 insertions(+)
create mode 100644 Documentation/admin-guide/perf/hisi-pcie-pmu.rst
create mode 100644 drivers/perf/pci/Kconfig
create mode 100644 drivers/perf/pci/Makefile
create mode 100644 drivers/perf/pci/hisilicon/Makefile
create mode 100644 drivers/perf/pci/hisilicon/hisi_pcie_pmu.c
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-05-19 9:50 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 9:48 Qi Liu [this message]
2021-05-19 9:48 ` [PATCH v4 0/2] drivers/perf: hisi: Add support for PCIe PMU Qi Liu
2021-05-19 9:49 ` [PATCH v4 1/2] docs: perf: Add description for HiSilicon PCIe PMU driver Qi Liu
2021-05-19 9:49 ` Qi Liu
2021-05-19 11:44 ` John Garry
2021-05-19 11:44 ` John Garry
2021-05-20 3:22 ` liuqi (BA)
2021-05-20 3:22 ` liuqi (BA)
2021-05-19 9:49 ` [PATCH v4 2/2] drivers/perf: hisi: Add driver for HiSilicon PCIe PMU Qi Liu
2021-05-19 9:49 ` Qi Liu
2021-05-19 11:40 ` John Garry
2021-05-19 11:40 ` John Garry
2021-05-20 3:31 ` liuqi (BA)
2021-05-20 3:31 ` liuqi (BA)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1621417741-5229-1-git-send-email-liuqi115@huawei.com \
--to=liuqi115@huawei.com \
--cc=bhelgaas@google.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mark.rutland@arm.com \
--cc=will@kernel.org \
--cc=zhangshaokun@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.