[PATCH net-next 0/2] Support ethtool ntuple rule count change

[PATCH net-next 0/2] Support ethtool ntuple rule count change

[sgoutham]

From: Sunil Goutham <sgoutham@marvell.com>

Some NICs share resources like packet filters across
multiple interfaces they support. From HW point of view
it is possible to use all filters for a single interface.
This 2 patch series adds support to modify ntuple rule
count for OcteonTx2 netdev.

Sunil Goutham (2):
  net: ethtool: Support setting ntuple rule count
  octeontx2-pf: Support setting ntuple rule count

 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |  1 +
 .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c  |  3 +++
 .../ethernet/marvell/octeontx2/nic/otx2_flows.c    | 27 ++++++++++++++++++++--
 include/uapi/linux/ethtool.h                       |  1 +
 net/ethtool/ioctl.c                                |  1 +
 5 files changed, 31 insertions(+), 2 deletions(-)

-- 
2.7.4

[PATCH net-next 1/2] net: ethtool: Support setting ntuple rule count

[sgoutham]

From: Sunil Goutham <sgoutham@marvell.com>

Some NICs share resources like packet filters across
multiple interfaces they support. From HW point of view
it is possible to use all filters for a single interface.
Currently ethtool doesn't support modifying filter count so
that user can allocate more filters to a interface and less
to others. This patch adds ETHTOOL_SRXCLSRLCNT ioctl command
for modifying filter count.

example command:
./ethtool -U eth0 rule-count 256

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 include/uapi/linux/ethtool.h | 1 +
 net/ethtool/ioctl.c          | 1 +
 2 files changed, 2 insertions(+)

diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index cfef6b0..2f16a07 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1552,6 +1552,7 @@ enum ethtool_fec_config_bits {
 #define ETHTOOL_PHY_STUNABLE	0x0000004f /* Set PHY tunable configuration */
 #define ETHTOOL_GFECPARAM	0x00000050 /* Get FEC settings */
 #define ETHTOOL_SFECPARAM	0x00000051 /* Set FEC settings */
+#define ETHTOOL_SRXCLSRLCNT	0x00000052 /* Set RX class rule count */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c
index 3fa7a39..ced4a02 100644
--- a/net/ethtool/ioctl.c
+++ b/net/ethtool/ioctl.c
@@ -2759,6 +2759,7 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
 	case ETHTOOL_SRXFH:
 	case ETHTOOL_SRXCLSRLDEL:
 	case ETHTOOL_SRXCLSRLINS:
+	case ETHTOOL_SRXCLSRLCNT:
 		rc = ethtool_set_rxnfc(dev, ethcmd, useraddr);
 		break;
 	case ETHTOOL_FLASHDEV:
-- 
2.7.4

[PATCH net-next 2/2] octeontx2-pf: Support setting ntuple rule count

[sgoutham]

From: Sunil Goutham <sgoutham@marvell.com>

Added support for changing ethtool ntuple filter count.
Rule count change is supported only when there are no
ntuple filters installed.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |  1 +
 .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c  |  3 +++
 .../ethernet/marvell/octeontx2/nic/otx2_flows.c    | 27 ++++++++++++++++++++--
 3 files changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 234b330..5420aca 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -820,6 +820,7 @@ int otx2_get_all_flows(struct otx2_nic *pfvf,
 int otx2_add_flow(struct otx2_nic *pfvf,
 		  struct ethtool_rxnfc *nfc);
 int otx2_remove_flow(struct otx2_nic *pfvf, u32 location);
+int otx2_set_flow_rule_count(struct otx2_nic *pfvf, int count);
 int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
 			      struct npc_install_flow_req *req);
 void otx2_rss_ctx_flow_del(struct otx2_nic *pfvf, int ctx_id);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index 8df748e..753a8cf 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
@@ -690,6 +690,9 @@ static int otx2_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *nfc)
 		if (netif_running(dev) && ntuple)
 			ret = otx2_remove_flow(pfvf, nfc->fs.location);
 		break;
+	case ETHTOOL_SRXCLSRLCNT:
+		ret = otx2_set_flow_rule_count(pfvf, nfc->rule_cnt);
+		break;
 	default:
 		break;
 	}
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
index 8c97106..61530c8 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
@@ -117,12 +117,29 @@ static int otx2_alloc_ntuple_mcam_entries(struct otx2_nic *pfvf, u16 count)
 
 	if (allocated != count)
 		netdev_info(pfvf->netdev,
-			    "Unable to allocate %d MCAM entries for ntuple, got %d\n",
-			    count, allocated);
+			    "Unable to allocate %d MCAM entries above default rules "
+			    "start index %d, got only %d\n",
+			    count, flow_cfg->def_ent[0], allocated);
 
 	return allocated;
 }
 
+int otx2_set_flow_rule_count(struct otx2_nic *pfvf, int count)
+{
+	struct otx2_flow_config *flow_cfg = pfvf->flow_cfg;
+
+	if (!flow_cfg)
+		return 0;
+
+	if (flow_cfg->nr_flows) {
+		netdev_err(pfvf->netdev,
+			   "Cannot change count when there are active rules\n");
+		return 0;
+	}
+
+	return otx2_alloc_ntuple_mcam_entries(pfvf, count);
+}
+
 int otx2_alloc_mcam_entries(struct otx2_nic *pfvf)
 {
 	struct otx2_flow_config *flow_cfg = pfvf->flow_cfg;
@@ -827,6 +844,12 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc)
 	u32 ring;
 	int err;
 
+	if (!flow_cfg->ntuple_max_flows) {
+		netdev_err(pfvf->netdev,
+			   "Ntuple rule count is 0, allocate and retry\n");
+		return -EINVAL;
+	}
+
 	ring = ethtool_get_flow_spec_ring(fsp->ring_cookie);
 	if (!(pfvf->flags & OTX2_FLAG_NTUPLE_SUPPORT))
 		return -ENOMEM;
-- 
2.7.4

Re: [PATCH net-next 1/2] net: ethtool: Support setting ntuple rule count

[Jakub Kicinski]

On Wed, 16 Jun 2021 18:21:21 +0530 sgoutham@marvell.com wrote:
> From: Sunil Goutham <sgoutham@marvell.com>
> 
> Some NICs share resources like packet filters across
> multiple interfaces they support. From HW point of view
> it is possible to use all filters for a single interface.
> Currently ethtool doesn't support modifying filter count so
> that user can allocate more filters to a interface and less
> to others. This patch adds ETHTOOL_SRXCLSRLCNT ioctl command
> for modifying filter count.
> 
> example command:
> ./ethtool -U eth0 rule-count 256

man devlink-resource ?

RE: [EXT] Re: [PATCH net-next 1/2] net: ethtool: Support setting ntuple rule count

[Sunil Kovvuri Goutham]

> -----Original Message-----
> From: Jakub Kicinski <kuba@kernel.org>
> Sent: Wednesday, June 16, 2021 11:28 PM
> To: Sunil Kovvuri Goutham <sgoutham@marvell.com>
> Cc: davem@davemloft.net; netdev@vger.kernel.org
> Subject: [EXT] Re: [PATCH net-next 1/2] net: ethtool: Support setting ntuple
> rule count
> 
> External Email
> 
> ----------------------------------------------------------------------
> On Wed, 16 Jun 2021 18:21:21 +0530 sgoutham@marvell.com wrote:
> > From: Sunil Goutham <sgoutham@marvell.com>
> >
> > Some NICs share resources like packet filters across multiple
> > interfaces they support. From HW point of view it is possible to use
> > all filters for a single interface.
> > Currently ethtool doesn't support modifying filter count so that user
> > can allocate more filters to a interface and less to others. This
> > patch adds ETHTOOL_SRXCLSRLCNT ioctl command for modifying filter
> > count.
> >
> > example command:
> > ./ethtool -U eth0 rule-count 256
> 
> man devlink-resource ?

Since ntuple rule insert and delete are part of ethtool, I thought having this config also in
ethtool will make user life easy ie all ntuple related stuff within one tool.

Thanks,
Sunil.

RE: [EXT] Re: [PATCH net-next 1/2] net: ethtool: Support setting ntuple rule count

[Sunil Kovvuri Goutham]

> -----Original Message-----
> From: Sunil Kovvuri Goutham
> Sent: Thursday, June 17, 2021 6:46 PM
> To: Jakub Kicinski <kuba@kernel.org>
> Cc: davem@davemloft.net; netdev@vger.kernel.org
> Subject: RE: [EXT] Re: [PATCH net-next 1/2] net: ethtool: Support setting
> ntuple rule count
> 
> 
> 
> > -----Original Message-----
> > From: Jakub Kicinski <kuba@kernel.org>
> > Sent: Wednesday, June 16, 2021 11:28 PM
> > To: Sunil Kovvuri Goutham <sgoutham@marvell.com>
> > Cc: davem@davemloft.net; netdev@vger.kernel.org
> > Subject: [EXT] Re: [PATCH net-next 1/2] net: ethtool: Support setting
> > ntuple rule count
> >
> > External Email
> >
> > ----------------------------------------------------------------------
> > On Wed, 16 Jun 2021 18:21:21 +0530 sgoutham@marvell.com wrote:
> > > From: Sunil Goutham <sgoutham@marvell.com>
> > >
> > > Some NICs share resources like packet filters across multiple
> > > interfaces they support. From HW point of view it is possible to use
> > > all filters for a single interface.
> > > Currently ethtool doesn't support modifying filter count so that
> > > user can allocate more filters to a interface and less to others.
> > > This patch adds ETHTOOL_SRXCLSRLCNT ioctl command for modifying
> > > filter count.
> > >
> > > example command:
> > > ./ethtool -U eth0 rule-count 256
> >
> > man devlink-resource ?
> 
> Since ntuple rule insert and delete are part of ethtool, I thought having this
> config also in ethtool will make user life easy ie all ntuple related stuff within
> one tool.
> 
> Thanks,
> Sunil.

Any further feedback or objections to these change ?

Thanks,
Sunil.

[PATCH net-next 0/2] Support ethtool ntuple rule count change

[sgoutham]

From: Sunil Goutham <sgoutham@marvell.com>

Some NICs share resources like packet filters across
multiple interfaces they support. From HW point of view
it is possible to use all filters for a single interface.
This 2 patch series adds support to modify ntuple rule
count for OcteonTx2 netdev.

Sunil Goutham (2):
  net: ethtool: Support setting ntuple rule count
  octeontx2-pf: Support setting ntuple rule count

 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |  1 +
 .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c  |  3 +++
 .../ethernet/marvell/octeontx2/nic/otx2_flows.c    | 27 ++++++++++++++++++++--
 include/uapi/linux/ethtool.h                       |  1 +
 net/ethtool/ioctl.c                                |  1 +
 5 files changed, 31 insertions(+), 2 deletions(-)

-- 
2.7.4