* [net-next v2 PATCH] octeontx2-pf: Add vlan-etype to ntuple filters
@ 2021-08-27 13:30 Subbaraya Sundeep
2021-08-29 9:50 ` patchwork-bot+netdevbpf
0 siblings, 1 reply; 2+ messages in thread
From: Subbaraya Sundeep @ 2021-08-27 13:30 UTC (permalink / raw)
To: davem, kuba, netdev; +Cc: sgoutham, hkelam, gakula, Subbaraya Sundeep
NPC extraction profile marks layer types
NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for
STAG after parsing input packet. Those layer types
can be used to install ntuple filters using
vlan-etype option. Below are the commands and
corresponding behavior with this patch in place.
> alias nt "ethtool -U eth0 flow-type ether"
> nt vlan 5 m 0xf000 action 0
Input packets with outer VLAN id as 5 i.e,
stag packets with VLAN id 5 and ctag packets with
VLAN id as 5 are hit.
> nt vlan-etype 0x8100 action 0
All input ctag packets with any VLAN id are hit.
> nt vlan-etype 0x88A8 action 0
All input stag packets with any VLAN id are hit.
> nt vlan-etype 0x8100 vlan 5 m 0xf000 action 0
All input ctag packets with VLAN id 5 are hit.
> nt vlan-etype 0x88A8 vlan 5 m 0xf000 action 0
All input stag packets with VLAN id 5 are hit.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
v2 changes:
Misc change, converted otx2_prepare_flow_request to static function
drivers/net/ethernet/marvell/octeontx2/af/npc.h | 2 ++
.../net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 35 ++++++++++++++++++----
.../ethernet/marvell/octeontx2/nic/otx2_common.h | 2 --
.../ethernet/marvell/octeontx2/nic/otx2_flows.c | 30 ++++++++++++++++---
4 files changed, 58 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc.h b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
index 243cf80..b426fd5 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/npc.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
@@ -172,6 +172,8 @@ enum key_fields {
NPC_DMAC,
NPC_SMAC,
NPC_ETYPE,
+ NPC_VLAN_ETYPE_CTAG, /* 0x8100 */
+ NPC_VLAN_ETYPE_STAG, /* 0x88A8 */
NPC_OUTER_VID,
NPC_TOS,
NPC_SIP_IPV4,
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
index 43874d3..e0634ef 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
@@ -20,6 +20,8 @@ static const char * const npc_flow_names[] = {
[NPC_DMAC] = "dmac",
[NPC_SMAC] = "smac",
[NPC_ETYPE] = "ether type",
+ [NPC_VLAN_ETYPE_CTAG] = "vlan ether type ctag",
+ [NPC_VLAN_ETYPE_STAG] = "vlan ether type stag",
[NPC_OUTER_VID] = "outer vlan id",
[NPC_TOS] = "tos",
[NPC_SIP_IPV4] = "ipv4 source ip",
@@ -492,6 +494,11 @@ static void npc_set_features(struct rvu *rvu, int blkaddr, u8 intf)
if (*features & BIT_ULL(NPC_OUTER_VID))
if (!npc_check_field(rvu, blkaddr, NPC_LB, intf))
*features &= ~BIT_ULL(NPC_OUTER_VID);
+
+ /* for vlan ethertypes corresponding layer type should be in the key */
+ if (npc_check_field(rvu, blkaddr, NPC_LB, intf))
+ *features |= BIT_ULL(NPC_VLAN_ETYPE_CTAG) |
+ BIT_ULL(NPC_VLAN_ETYPE_STAG);
}
/* Scan key extraction profile and record how fields of our interest
@@ -747,6 +754,28 @@ static void npc_update_ipv6_flow(struct rvu *rvu, struct mcam_entry *entry,
}
}
+static void npc_update_vlan_features(struct rvu *rvu, struct mcam_entry *entry,
+ u64 features, u8 intf)
+{
+ bool ctag = !!(features & BIT_ULL(NPC_VLAN_ETYPE_CTAG));
+ bool stag = !!(features & BIT_ULL(NPC_VLAN_ETYPE_STAG));
+ bool vid = !!(features & BIT_ULL(NPC_OUTER_VID));
+
+ /* If only VLAN id is given then always match outer VLAN id */
+ if (vid && !ctag && !stag) {
+ npc_update_entry(rvu, NPC_LB, entry,
+ NPC_LT_LB_STAG_QINQ | NPC_LT_LB_CTAG, 0,
+ NPC_LT_LB_STAG_QINQ & NPC_LT_LB_CTAG, 0, intf);
+ return;
+ }
+ if (ctag)
+ npc_update_entry(rvu, NPC_LB, entry, NPC_LT_LB_CTAG, 0,
+ ~0ULL, 0, intf);
+ if (stag)
+ npc_update_entry(rvu, NPC_LB, entry, NPC_LT_LB_STAG_QINQ, 0,
+ ~0ULL, 0, intf);
+}
+
static void npc_update_flow(struct rvu *rvu, struct mcam_entry *entry,
u64 features, struct flow_msg *pkt,
struct flow_msg *mask,
@@ -779,11 +808,6 @@ static void npc_update_flow(struct rvu *rvu, struct mcam_entry *entry,
npc_update_entry(rvu, NPC_LD, entry, NPC_LT_LD_ICMP6,
0, ~0ULL, 0, intf);
- if (features & BIT_ULL(NPC_OUTER_VID))
- npc_update_entry(rvu, NPC_LB, entry,
- NPC_LT_LB_STAG_QINQ | NPC_LT_LB_CTAG, 0,
- NPC_LT_LB_STAG_QINQ & NPC_LT_LB_CTAG, 0, intf);
-
/* For AH, LTYPE should be present in entry */
if (features & BIT_ULL(NPC_IPPROTO_AH))
npc_update_entry(rvu, NPC_LD, entry, NPC_LT_LD_AH,
@@ -829,6 +853,7 @@ do { \
ntohs(mask->vlan_tci), 0);
npc_update_ipv6_flow(rvu, entry, features, pkt, mask, output, intf);
+ npc_update_vlan_features(rvu, entry, features, intf);
}
static struct rvu_npc_mcam_rule *rvu_mcam_find_rule(struct npc_mcam *mcam,
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 96eddd0..521c388 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -838,8 +838,6 @@ int otx2_get_all_flows(struct otx2_nic *pfvf,
int otx2_add_flow(struct otx2_nic *pfvf,
struct ethtool_rxnfc *nfc);
int otx2_remove_flow(struct otx2_nic *pfvf, u32 location);
-int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
- struct npc_install_flow_req *req);
int otx2_get_maxflows(struct otx2_flow_config *flow_cfg);
void otx2_rss_ctx_flow_del(struct otx2_nic *pfvf, int ctx_id);
int otx2_del_macfilter(struct net_device *netdev, const u8 *mac);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
index e949001..0d10efba 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
@@ -762,7 +762,7 @@ static int otx2_prepare_ipv6_flow(struct ethtool_rx_flow_spec *fsp,
return 0;
}
-int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
+static int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
struct npc_install_flow_req *req)
{
struct ethhdr *eth_mask = &fsp->m_u.ether_spec;
@@ -818,8 +818,30 @@ int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
return -EOPNOTSUPP;
}
if (fsp->flow_type & FLOW_EXT) {
- if (fsp->m_ext.vlan_etype)
- return -EINVAL;
+ u16 vlan_etype;
+
+ if (fsp->m_ext.vlan_etype) {
+ /* Partial masks not supported */
+ if (be16_to_cpu(fsp->m_ext.vlan_etype) != 0xFFFF)
+ return -EINVAL;
+
+ vlan_etype = be16_to_cpu(fsp->h_ext.vlan_etype);
+ /* Only ETH_P_8021Q and ETH_P_802AD types supported */
+ if (vlan_etype != ETH_P_8021Q &&
+ vlan_etype != ETH_P_8021AD)
+ return -EINVAL;
+
+ memcpy(&pkt->vlan_etype, &fsp->h_ext.vlan_etype,
+ sizeof(pkt->vlan_etype));
+ memcpy(&pmask->vlan_etype, &fsp->m_ext.vlan_etype,
+ sizeof(pmask->vlan_etype));
+
+ if (vlan_etype == ETH_P_8021Q)
+ req->features |= BIT_ULL(NPC_VLAN_ETYPE_CTAG);
+ else
+ req->features |= BIT_ULL(NPC_VLAN_ETYPE_STAG);
+ }
+
if (fsp->m_ext.vlan_tci) {
memcpy(&pkt->vlan_tci, &fsp->h_ext.vlan_tci,
sizeof(pkt->vlan_tci));
@@ -995,6 +1017,7 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc)
if (!flow)
return -ENOMEM;
flow->location = fsp->location;
+ flow->entry = flow_cfg->flow_ent[flow->location];
new = true;
}
/* struct copy */
@@ -1046,7 +1069,6 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc)
flow_cfg->max_flows - 1);
err = -EINVAL;
} else {
- flow->entry = flow_cfg->flow_ent[flow->location];
err = otx2_add_flow_msg(pfvf, flow);
}
}
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [net-next v2 PATCH] octeontx2-pf: Add vlan-etype to ntuple filters
2021-08-27 13:30 [net-next v2 PATCH] octeontx2-pf: Add vlan-etype to ntuple filters Subbaraya Sundeep
@ 2021-08-29 9:50 ` patchwork-bot+netdevbpf
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+netdevbpf @ 2021-08-29 9:50 UTC (permalink / raw)
To: Subbaraya Sundeep; +Cc: davem, kuba, netdev, sgoutham, hkelam, gakula
Hello:
This patch was applied to netdev/net-next.git (refs/heads/master):
On Fri, 27 Aug 2021 19:00:55 +0530 you wrote:
> NPC extraction profile marks layer types
> NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for
> STAG after parsing input packet. Those layer types
> can be used to install ntuple filters using
> vlan-etype option. Below are the commands and
> corresponding behavior with this patch in place.
>
> [...]
Here is the summary with links:
- [net-next,v2] octeontx2-pf: Add vlan-etype to ntuple filters
https://git.kernel.org/netdev/net-next/c/dce677da57c0
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-08-29 9:50 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-27 13:30 [net-next v2 PATCH] octeontx2-pf: Add vlan-etype to ntuple filters Subbaraya Sundeep
2021-08-29 9:50 ` patchwork-bot+netdevbpf
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.